I just started going back to the gym and I use Bluetooth headphones with my note 2. I'm debating on buying a Bluetooth heart rate monitor to use with a couple of workout apps to track my calories being burned.
I'm wondering.. will I be able to connect both devices simultaneously?
In the car I connect to my head unit, cobra iradar and obd2 scanner. So I don't think you should Have a problem
Sent from my SGH-T889 using Tapatalk 4
I figured it wouldn't be an issue. Thanks
desikilla said:
I figured it wouldn't be an issue. Thanks
Click to expand...
Click to collapse
how....as far as i know....one connection can be made at a time; as soon as you connect one BT, the other got disconnected.
just like wifi and hotpost; your phone either is on wife mode to get internet connection from other or your phone is on wifi-hotpost mode to provide internet connection to others
desikilla said:
I just started going back to the gym and I use Bluetooth headphones with my note 2. I'm debating on buying a Bluetooth heart rate monitor to use with a couple of workout apps to track my calories being burned.
I'm wondering.. will I be able to connect both devices simultaneously?
Click to expand...
Click to collapse
You can simultaneously connect and use the devices only if they use different BT Profiles. For example, I routinely connect the Note2 to my car's BT receiver for phone calls (Hands-Free Profile, HFP), MP3 playback to the car's speakers (A2DP), and navigation using an external GPS device (Serial Port Profile, SPP). Works fine.
Related
Does anyone know if I can utilize 2 BT connections at the same time? I want use a Parrot device to connect to my phone and a BT headset as well if I'm making any sense.
Sent from Bonsai 7.1.1.1
Top Nurse said:
Does anyone know if I can utilize 2 BT connections at the same time? I want use a Parrot device to connect to my phone and a BT headset as well if I'm making any sense.
Sent from Bonsai 7.1.1.1
Click to expand...
Click to collapse
I don't think so. I think it is a limitation of BT
Sent from my SPH-D700 using XDA Premium App
My understanding is that only 1 bluetooth radio connection can be made and be IN USE at any time.
So if you are actively connected to 1 device its using the radio.
Some BT headsets can be paired to multiple phones at the same time, but once you are in a call then the other connection is lost. Its more of a stand by connection while both are NOT in use.
If you were to stream music, it would be in use. So only 1 connection can be maintained.
However, when BT devices do different things they can properly hand off activity if the device doesn't have routing bugs. On my Epic I have stereo streaming to my car stereo, plus my headset. Two different profiles, and if I make a call or one comes in, the music is interrupted and it USUALLY goes to my headset. But, like I mentioned, bugs...
I use a bluetooth GPS receiver in my car for two reasons
1. It has an athermic windscreen and the bluetooth GPS with an antenna in the back window gets a much better signal
2. I use it as a trigger for a tasker script so that the phone knows that it is in my car
I am thinking of putting a bluetooth audio receiver in the car as well so that I can stream music from the phone to the car speakers
Is the One-X capable of simultaneously communicating with two different bluetooth devices?
thanks
gps test?
Which to do gps test my one x ?
I use an app called "Bluetooth GPS Provider" which works brilliantly. I think that is what your question meant?
Mine will connect to hands free and my obd2 reader at the same time via bluetooth. Do you have a way of testing before buying?
i think if it uses different protocols for each device then it would work
ie if one used a2dp and the other uses whatever gps uses, then yeah i think it would work , but best bet is to test it out first
Quick question whether there is an app, mod, or even build.prop edit that would allow my Note II to automatically try to connect to my car's single din Kenwood KDC‑BT952HD. Only thing the head unit tries to do when connected is re-download contacts, but it turns on as soon as my car turns on and it'd be a lot faster if my Note automatically attempted to connect to the head unit instead of the bluetooth popup with listed devices, which I don't even have considering I'm running Whompasaurus V2.9. so if there's any way I could even get the pop up that'd be great too!
I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.
I'm new to tasker and I'm not sure how to enable the auto-connect through tasker.
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
maybe I'm missing something here, so may suggestion by be complete off.
Maybe leaving BT tunred on your GN2 before you get in your car. Or turned it on before you get in the car. I'm assuming the ROM you're using has a BT toggle. The thinking is that your headunit will try to automatically connect to any paired BT devices. If so, the GN2 should automatically connect when the deck does it's search.
This works for me when I try connecting to Jawborn Big Jambox or Jawbone Era or other BT devices I have paired on my GN2. It may be worth nothing I'm on a deoxidized stock rom. But I this also worked when I ran AOSP roms on my Evo 4G such as CM.
If the headunit does not do a pair device search and connect when it turns on, then I would definitely try suggest above. I have no clue, and that's better than nothing.
no autoconnect on GN2
Once you had a BT connection with your car and leave it at the gas station e.g. it won't reconnect when you're back!
Sad, but since then I tried the mighty Tasker and similar apps, but was happy with the app called "Bluetooth Auto Connect".
You can define the simple trigger, when display on....
So whenever I get back into the car, I hit either the menu or start button, that's it. Without unlocking you are back connected.
The only other annoying thing that you might be able to fix with Tasker is, that right after the A2DP establishes the connection the player starts playing the last song, which I obviously don't want most of the time.
Also Play Pause Next etc over BT doesn't work too well on android.
I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2
Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That's interesting, I always wonder what exactly secure settings does, but this example helps.
Sent from my SPH-L900 using xda premium
1FstYOTA said:
I have a Alpine head unit and as long as my bt is on before I start the car everything syncs automatically.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2
Tasker worked for me
Skripka said:
I have a Kenwood Dnx6980, and my experience has been that once my phone has been setup to sync ... The Kenwood will talk to it automagically.
This is using AOSP or non stock roms. Ofc.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.
[email protected] said:
Guys I have a Chinese brand double din...MobileVision...or something like that and using Tasker along with Bluetooth autoconnect worked for me. The posts above describe exactly how to set it up and it worked for me.
Click to expand...
Click to collapse
Bluetooth autoconnect's main feature works for my xperia pro (turn on bluetooth, connect to your selected devices in automatic)
Bluetooth autoconnect's tasker plugin is not working for me. I can use it, sort off, but it does nothing. Like, "Press the button, but there was no reply!"
Well that is odd. I have a Pioneer unit and my phone connects to it as soon as it detects it in range. Even if I turn off BT and then power it on, the phone automatically connects to the head unit without any intervention on my part. Sounds like an issue with your stereo.
No stereo issue. On some of the touch wiz based roms bluetooth DOES NOT auto connect. On most (if not all) aosp roms bluetooth DOES auto connect. Currently on ma7 stock with root and it auto connects. When I was on whomp, jellybombed, and labrats
Sent from my SPH-L900 using Tapatalk 4 Beta
Bluetooth Connection
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?
devilshady said:
Hi Guys,
Im glad i found this thread, im wondering if anyone could help me out.
My scenario is, my bluetooth is connected to my car radio playing files. When a call comes in, i need it to disconnect from the car radio and connect to my bluetooth headset, all without turning off bluetooth ( preferable )
My possible solutions are:
1 ) By using automagic, ive managed to get alot done with this app, but this seems beyond it.
2 ) Getting automagic to start an application when a call comes in which will force bluetooth connection to a specific bluetooth device and disconnected from other devices.
Anyone got any suggestions?
Click to expand...
Click to collapse
not sure of your rom, but both TW and CM allow you to set whether each connection is Media or Phone. put your headset to phone and your car to media only. when you answer the phone the headset should take over.
Lord Sekhmet said:
I use Tasker to turn on Bluetooth and connect to my earpiece. But I need a trigger and I need to turn on my earpiece. The trigger I use is activating my map app.
So without a trigger, I don't know how to do that.
Click to expand...
Click to collapse
Could you share how you did this? I am completely confused by the interface.
I am wanting the same setup but also for music player and Pandora
I haven't found an example to follow that even comes close.
---------- Post added at 09:54 AM ---------- Previous post was at 09:43 AM ----------
Lord Sekhmet said:
I am new to Tasker too.
Task / Net / Bluetooth
will turn on/off/ toggle Bluetooth
Task / plugin / Secure Settings (separate app) / BT Connect
Will connect to your chosen Bluetooth device.
My best advice is to play around. Also, here is the first of a 3 video series on Tasker.
http://www.youtube.com/watch?v=BEhnOJl5mTo&feature=youtube_gdata_player
Click to expand...
Click to collapse
That helps,
I was going task / setting / Bluetooth
Still not sure how to set the trigger however.
[EDIT]
The first few minutes of that video answered my questions.
Sorry, I partied late last night and still kinda loopy.
Sent from my Jedi MasterX Note 2
Hi everyone,
Got my black Z1c yesterday, love it so far!
However, when I try to use it in my car (Audi A6 2008), I cannot place a call if it was initiated from the car's interface.
The phone connects to BT no probs and shows my car in the devices list as a headset. Incoming calls are reflected on the car's display, and connected to the speaker's/mic of the car. When I place a call from the phone itself - same deal, all works as expected. But when I use the car's controls to dial a number, the car's display shows "connecting", and nothing happens...
Tried to pair/unpair many times, no success. Tried other phones, like iPhone 5, Samsung Ativ S (WP8), Samsung Galaxy S4 Active, HTC One - all work seamlessly. My old Xperia Z was working fine, until I sold it to get the Z1c... I would never expect Z1c to behave like this...
Anyone has similar issues?
Yes mine is the same (ford sync)
Sent from my D5503 using XDA Premium 4 mobile app
Hoagi said:
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks.
There are two important parameters of Bluetooth devices - class and supported profiles.
"Class" signifies the distance at which a Bluetooth connection is possible. Most mobile devices are Class 2, which means they have a range of up to 10 m. Class 1 devices are rare and have a range of up to 100 feet.
A "profile" is a type of Bluetooth connection. The most common are the Headset (HSP) and Handsfree (HFP) profiles that enable the device to connect to a wireless headset or handsfree.
Some other profiles are OBEX (OBject EXchange) which allows transfer of files, contacts and events; A2DP, which adds support for streaming of stereo sound and AVRC, which allows remote control of playback.
Click to expand...
Click to collapse
... and the reason you have posted this is...?
Aung Thiha said:
try clear caches. All kinds of caches. When I say all kinds, I mean all caches that you can clean. Retry what you want to do. If it does not help, try factory reset and retry your bluetooth connection. if it still does not help, try flash firmware. I guess this is the solution you can count on.
Click to expand...
Click to collapse
Thanks, will try. The phone was just outta box when I was trying it in my car... The car was the first BT device it has ever been paired wtih...
Phone calls work fine on mine.
BUT while we're on the topic of vehicle BT, has anyone got working song info via bluetooth? I thought it was supposed to support avrcp 1.3, but in my car (2013 Ford SYNC) I still get no info about songs I'm listening to and also the voice commands for playing artists or albums don't work.
/Daniel
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Sent from my iPhone 5s using Tapatalk
easycure1974 said:
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Click to expand...
Click to collapse
In my Toyota Auris 2013 model song info always worked with Walkman app assuming you have tags filled out correctly.
I know there were some issues with tag info in Poweramp I prefer to use but they got that fixed recently. Advanced options to display song info on external BT device is just buried deep in app's settings though.
Everything works fantastic on my BMW F10 (2012) with Navigation Professional, Bluetooth Music with Song Info, Phone with contact pictures (! Didn't even know that was possible until I got the Z10c) and full Message Access Profile with historic E-Mail and SMS access.
The In-Car integration is the main reason why I am torn between iPhone 5s and Xperia Z1c.
The iPhone has the Advantage of "BMW Apps", which allow using Webradio, Facebook, RSS Feeds etc. through the Navigation, as well as iPod Control and Coverart Display.
The Z10 can't do those things, but it can do Bluetooth MAP which is rather important to me also. Webradio can of course be streamed via BT (and controlled on the phone).
I just purchased the Galaxy Watch Active and have a few questions about Bluetooth & wireless connectivity. I hope someone can share their experience with me.
1. Should the watch always be connected to Bluetooth on my phone? Or, only connected when I want to sync to S-Health, install a new watch face, et. al.?
2. If I desire to connect my phone to another Bluetooth device (Ticpods, speaker), must I disconnect from the watch?
Q: Is this standard practice?
--- Yes, I can connect 2 devices to my Note9 but curious if there are any connectivity implications with both devices connected.
(I am thinking in terms of Fitbit Versa where phone Bluetooth is not connected(from what I could tell) even though FB Versa shows as choice in Bluetooth devices.)
3. I have not set up wireless yet and will do so this evening when home.
Q: What are the different use cases for Wireless vs. Bluetooth on the SWA?
FYI - I am an XDA old-timer but a newbie to this watch. Your feedback is appreciated.
Thanks in advance.
~j
johninsf said:
I just purchased the Galaxy Watch Active and have a few questions about Bluetooth & wireless connectivity. I hope someone can share their experience with me.
1. Should the watch always be connected to Bluetooth on my phone? Or, only connected when I want to sync to S-Health, install a new watch face, et. al.?
2. If I desire to connect my phone to another Bluetooth device (Ticpods, speaker), must I disconnect from the watch?
Q: Is this standard practice?
--- Yes, I can connect 2 devices to my Note9 but curious if there are any connectivity implications with both devices connected.
(I am thinking in terms of Fitbit Versa where phone Bluetooth is not connected(from what I could tell) even though FB Versa shows as choice in Bluetooth devices.)
3. I have not set up wireless yet and will do so this evening when home.
Q: What are the different use cases for Wireless vs. Bluetooth on the SWA?
FYI - I am an XDA old-timer but a newbie to this watch. Your feedback is appreciated.
Thanks in advance.
~j
Click to expand...
Click to collapse
1 Always connected to BT so you get notifications etc. 24/7
2 No need to disconnect when using other devices.
3 A lot ppl don't seem to like WiFi and call it useless. I am not too sure. IDK Can't do much without BT.
Dixon Butz said:
1 Always connected to BT so you get notifications etc. 24/7
2 No need to disconnect when using other devices.
3 A lot ppl don't seem to like WiFi and call it useless. I am not too sure. IDK Can't do much without BT.
Click to expand...
Click to collapse
Thank you for the feedback!