Develop Bugs

Does anyone else get the letters "ty" when you open the keyboard?

It happens to me quite a bit when i open up the keyboard..sometimes i'll get just a "t", lots of times "ty." I don't think it's a coincidence that they happen to be the 2 top most centered keys, but I don't think the casing is rubbing and pressing the buttons. Is anyone else experiencing this? It is pretty annoying cause you always have to delete them before you type anything

i get them as well since i last updated (CRC r11.0)

same rom as me...
hmmm....better check in that thread

Mine does it as well using TNT's Rom. I don't think it's rom related, as every ROM I've used has done this.
It may not look like it, but I'm betting your casing it rubbing. I know mine is by using dry erase marker and seeing the transfer on the T and Y keys.
Good luck

lol.. i get them also.. but it only happens sometimes...
im using FARIA-R32-XDA2 rom

Yea, sitting here playing with mine, you're right, only sometimes. Seems it depends how I open the slide, how it torques, etc.

TY
No... It never hppened to me, actually... No matter what ROM I use...
I wish I could help.
Iim sorry...
Cheers.

Your phone is thanking you for installing a new rom! TY!

TY
Hello Together,
I think it is a hardware problem. When push with your thumbs on the bottom of the screen while you slide out the keyboard (this is my normal methode to slide it out) you push the characters T and Y because they are in the middle of the upper row.
I wonder if it is possible to lock the buttons (in software) till the slider is out completely (when the screen rotates). Does anyone know a register or software solution?
Greetings Pudl

yes its a hardware problem...your keyboard cable is a bit loose probably...
you have to take your phone apart to fix that
its the bottom left ribbon cable with a flat silver plate that u need to unplug when u seperate the motherboard
and the screen rotation is activated by some magnetic thingy if i remember correctly

hehe,i also think it's the hardware problem

[Q] Black screen on HTC Desire

Hi guys
i have a strange issue on my device,since stock ROM i guess, the problem is follows:
my screen just go black sometimes i thing it happend only when a call is in progress or when call is ended by the third part, the screen just stay black and no solution but uplug battery and start up the phone
i had this problem eaven on my stock Rom froyo 2.2, then i try leedroid 2.3 and it was ok i guess, then i try oxygen rc6 everything works superb,fast,clean,smooth but the black screen occures multiple times in one day (today around 3 times) so i was forced to return to my stock froyo 2.2 and hopes will be ok,
the problem is as i search thru internet... seems like one of the sensors works baddly, i think is the proximity sensor, what can i do? should i sent my device to repair? i realy appriciate any help and suggestions and ideas how can fix this problem....

still no solution it happens on stock froyo 2.2 too but in smaller period as on oxygen rc6, i try set --- display off to value 30 minute from previously 2 minutes and problem dont occured for last 2 days

this might seem like an ovbious answer but when your making a call the desire has a light/proximity sensor to the left of the top htc logo that turns the screen black when it senses something, this is to stop you pushing buttons with your ear.
i dont mean to insult your intelligence or anything, just saying ya know if it happens when not in a call it sounds like a software issue

i already know that, searchin a lot about this problem mate trust me, i also know when the proximity sensor is located and what is his function but the issue happening only when a call is made never happend just like that so i thing no sw prob, using stock froyo 2.2 now no root just a clean official and it happens like 2 times per day when i was calling more that 2 minutes when i set in setting--display to turn off screen in 10 minutes this problem dont show up soo i dont know realy maybe i sent my device to reklamation will see

This happens me with root and without root. It's when your using anything that has with the SD card to do with. Like the gallery, it has gone black for me to under a call though... I dont know how to fix this problem, and it's very frustrating to take out the battery all the time.

My friend i am working in mobiles but i couldn't guess the problem cause i bought my cousin this HTC desire until she removed the screen guard (( the plastic sticker for protect the screen)) from the screen and i solved the problem so easily.
Best of luck

true is that i am using Zagg shield, but this cannot solve the problem cuz i try few days without any screen protector and the problem was still there,
but i guess i solve this problem few months ago, i notice that the black screen after call happend when my network is set to "GSM only" strange but since i use WCDMA only the problem is gone, dont know surely but guessing, also when i use mobile network in gsm only mod, phone freezes totaly and only unplug battery helps, as i said since i am using wcdma/hsdpa/3g only non of these strange thing happens
hope this help for someone

AssassinSvK said:
true is that i am using Zagg shield, but this cannot solve the problem cuz i try few days without any screen protector and the problem was still there,
but i guess i solve this problem few months ago, i notice that the black screen after call happend when my network is set to "GSM only" strange but since i use WCDMA only the problem is gone, dont know surely but guessing, also when i use mobile network in gsm only mod, phone freezes totaly and only unplug battery helps, as i said since i am using wcdma/hsdpa/3g only non of these strange thing happens
hope this help for someone
Click to expand...
Click to collapse
Hi, guy!!
I've the same problem several months ago. Have you solved by using WCDMA only??
Thanks

Hi all,
This was happen to me last few day and i google whole world, finally i find my answer and i hope it was help for those who facing this kind of problem.
I can confirm this problem no related to rooted or without rooted phone. this problem definitely come from the proximity sensor which people highlighted this sensor located at top left of htc logo which u can see a blue color circle there.
Try watch this video of disassemble htc desire and you will find the way to clean this proximity sensor area.
Tools to use for dis-assembly:
1. Philips screw driver.
2. Torx screw driver
Cleaning tools:
1. a wet small cotton buds.
Hope this method can help.
Area to clean:
1. The proximity sensor which you will see covered by a black rubber
2. The casing area which i show on photo.
Disassembly Video:
youtube.com/watch?v=sXZqIjtFoAU
i231.photobucket.com/albums/ee126/nkh73925/untitled.jpg
I were unable to post due to spamming protection system from XDA. Please add urlsef the http.

unable to adjust brightness after replacing display

Hello,after replacing the display (by myself) , I' m not able to adjust the brightness of my display. It's stuck on the lowest level. Things I've tried;
- Called with HTC
- Performed hard reset
- Set the brightness to "auto"
- To adjust it with a brightness widget on my homescreen
- Replaced it with another display
- And of course digging through XDA
Specs;
- Desire Z 2.3.3,sense 2.1,unrooted
When I try to adjust it to the max.level it does not give an error. It just stays on the lowest level.
Is there anyone with the same problem or better,has a solution?
Many thanks in advance!

Can't adjust brightness either...kinda sucks
I am also having this issue and would appreciate any insight.

Did you guys do the work yourselves?

Yes,together with a video on "repair universe" I changed the display by myself (twice). Still having the same problem.
Anyone

Brightness stuck on highest setting
I also have this same problem. I just replaced the lcd display myself yesterday on my G2 with the help of the repair universe video. My display brightness is stuck on the highest level. When I try to adjust the brightness, only the buttons on the bottom of my screen (home, menu, back, search) change brightness but not the display.
I'm currently running ILWT CM7 297.
I'm going to try re-flashing my radio and then wiping and flashing a new ROM.
If anyone knows how to fix this please help!

I suspect it is hardware related such as the ribbon cable or screen is missing a lead for the dimming function. Can't tell from here though sorry.

killj0y said:
I suspect it is hardware related such as the ribbon cable or screen is missing a lead for the dimming function. Can't tell from here though sorry.
Click to expand...
Click to collapse
I tend to second this opinion from killj0y.
Have you tried making sure the ribbon cables are tight and secure? Sounds like the ribbon cable from the screen may be loose.

beefynick said:
I tend to second this opinion from killj0y.
Have you tried making sure the ribbon cables are tight and secure? Sounds like the ribbon cable from the screen may be loose.
Click to expand...
Click to collapse
Also is it the original ribbon?

Any updates
Has anyone figured out the answer to this? I just replaced the LCD from RepairsUniverse.com as well and the same thing. The brightness is low and won't change at all. Everything was fine before and RepairsUniverse.com says it's the motherboard. If the motherboard was fine before and all of us are having pretty much the same problem and some (or all?) of us got the replacement from RepairsUniverse.com, does anyone else smell a rat?

I know nothing of this company but depending on you screen problem, I wouldn't assume your mb is perfectly fine.
Sent from my HTC Desire Z using Tapatalk

Mine too
Has anyone fixed this problem? I have the exact symptoms, this is the second one I've tried, could it be because the lcd isnt oem? Please help

Hi. Are there any updates to this proble. I recently had the screen replaced on my Desire S and now it is stuck on the lowest brightness settings. Change any of the brightness controls does nothing. I took it back to the shop and they tried another screen, but still have the same problem. The motherboard was also replaced and the problem was there, but reversed...!? The screen was then stuck on full brightness...
Back to the original motherboard and the brightness is back stuck on lowest brightness setting....
Unrooted, Stock ROM

screen wont come back on during call

my wife has the att nitro hd, when the screen goes off during a call sometimes nothing including power button will turn it back on. Anyone know of a fix? did the ATT small update fix this?
Actually it comes back on after a long minute or two. Not very helpful if you need the dialpad or keys, etc.
I have just rooted it for her and installed CWM.
I have added a few proximity tweaks to build.prop
gsm.proximity.enable=false (rebooted twice but screen still goes off)
also used the ro.lg.proximity and the mot.lge.proximity (dont recall exact wording) both were set to a value of 5.
I'll have to take alook into the lg hidden dialer menu to see if I can disable this.
I dont like this sensor on my device either, but I have an option in settings to disable it, which makes it bearable.
thanks for the help guys.
I have noticied LG throws together some junky builds, typos, bad english/grammar. Wonky sensors etc. Incorrect kernel build ReadMe's
I thought I recall someone with another device just placing a peice of tape over the sensor. hmmm..worth a try.
cheers.

chrisrotolo said:
gsm.proximity.enable=false (rebooted twice but screen still goes off)
also used the ro.lg.proximity and the mot.lge.proximity (dont recall exact wording) both were set to a value of 5.
Click to expand...
Click to collapse
Congrats. Today, you learned that most of the "tweaks" found at XDA are utter bull****

aremcee said:
Congrats. Today, you learned that most of the "tweaks" found at XDA are utter bull****
Click to expand...
Click to collapse
What about the tweaks that aren't BS? Are they already included in your CM9 builds?

From what I can tell, pretty much the main thing that build.prop is good for is providing information about the system and software (i.e. info about the build). It's not really used much for useful configurations as far as I know.

networks tweaks actually have doubled me download speed.
I still have faith.
but can anyone answer my questions I posted in ICS SLim thread and PM'ed Andasa , no responses yet.
does ICS slim or CM9 have option to keep lcd no during call? and does it work??
what's working not working? I found changelogs but not a working/not working list for CM9.
and has anyone successfully restored a nandroid from ICS to GB without real issues?
thanks guys.

i doubt the ota fixed your issue as the issue is not one that occurs for every nitro.
I can tell you that when I make a phone call they screen stays no.
what's working not working, well, many of us are running it daily with no probs.
as you prolly know, it is a nightly build so a public list of what's working or not isn't rly part of the deal.
i've succesfully restore a nandroid from both slim and cm9 back to the stock att rom and others many many times. dozens.

thanks good enough.
I will have to give it a go.
would you recommend one or the other?
CM9 or slim?
thank you.

well, I like them both a lot. slim is just a trimmed down version of cm9 and i _think_ it does run just a bit snappier........maybe..but it's not wildly different from cm9. I usually switch back&forth throughout the day.

There's no setting in CM9 to disable the proximity sensor, although there may be a way to do it.

We just got a Nitro HD for my wife and her phone also has this issue. I have not gotten to know the phone well enough to try rooting or anything else of that nature, it's pure stock.
When she makes a call the screen turns off immediately after hitting the call button and will not wake up. When she receives a call we get a glimpse of the in-call screen with the various buttons etc but then the screen turns off. If the other party hangs up her screen turns back on, but if she calls something automated, like voicemail, she can't do anything except pull the battery to disconnect.
I've tried putting my thumb over the proximity sensor, hitting all buttons including power, and nothing makes the screen wake up or turns the phone off other than a battery pull.
The phone was running a build from last November when we first got it (V10i?) and today prompted us to update, so I did that hoping it would solve the problem. The phone is currently on V10j, but the problem persists.
Any help?

no driver said:
We just got a Nitro HD for my wife and her phone also has this issue. I have not gotten to know the phone well enough to try rooting or anything else of that nature, it's pure stock.
When she makes a call the screen turns off immediately after hitting the call button and will not wake up. When she receives a call we get a glimpse of the in-call screen with the various buttons etc but then the screen turns off. If the other party hangs up her screen turns back on, but if she calls something automated, like voicemail, she can't do anything except pull the battery to disconnect.
I've tried putting my thumb over the proximity sensor, hitting all buttons including power, and nothing makes the screen wake up or turns the phone off other than a battery pull.
The phone was running a build from last November when we first got it (V10i?) and today prompted us to update, so I did that hoping it would solve the problem. The phone is currently on V10j, but the problem persists.
Any help?
Click to expand...
Click to collapse
If you bought it from a store, get it exchanged for a new one.

actually works much faster on cm9, but therr still should be an optin to keep lcd on during call. i found some free apps that will disable hardware drivers but cant find the name of the proximity sensor driver, only that is named LGE.

Unfortunately it was given to us by a friend after my wife lost her Captivate, so taking it to a store to exchange is probably not going to work too well. As far as I can tell it was never used before we got it--the battery was still in it's own sealed pouch, the texting and driving warning was on the phone, and the phone went through the whole initial setup routine--but they didn't send us the box, I guess to cut down on mailing costs. I was hoping there was a known solution.

Ok, I downloaded two proximity sensor test apps today, but neither showed any activity. On my Captivate I get different readings with Proximity Sensor Finder (market link), but on the Nitro it is stuck at 3cm and it doesn't register anything no matter where I put my hand over the phone.
Can someone whose phone works right try installing this app and make sure that it picks up different readings on this device? OP, if you are still having issues, can you also try this app and see if it is static for you?
Thanks.

Took off the screen protector that they installed at the AT&T store and now the proximity sensor works just fine. OP, do you have a screen protector on your device?

we had an awfully thick one from att. we have since changed it to a super thin one. screen off is not a real problem on cm9, however i feel all devices should have the option to disable proximity sensor/keep lcd on during calls.

It's worth trying to use the warranty on the phone. Even though you dont have the original sales reciept, the phone has been released for less than a year, so no matter when you bought it, it is still within it's year long guaranteed warranty window.
Finished reading the thread, I suppose this post is now irrelevent

[Q] Auto rotate does not work.

Hi Guys,
So I got my M9 yesterday and its awesome. The ony problem is that it does not auto rotate.
I have turned auto rotate on and off, no diffrence.
I have done the G-sensor calibration tool in display settings. The top bar does not move (Guess thats the problem one).
I have loaded the phone up in safe mode and done the G-sensor thing. Still not working.
The only time the screen rotates is when a app forces it to rotate. like in a game, camera app, and youtube.
I only noticed this late last night.
I have yet to do a factory reset as I am at work. Once home I will give it a try.
Any one got any ideas?

Sense never rotated whilst sober..

So I have done a factory reset. No change.
Got it at 3 (UK), they said I can do a swap.
Hopefully 2nd device will will rotate...

jauhien said:
Sense never rotated whilst sober..
Click to expand...
Click to collapse
Not fully true, i think Sense 3.5 had it, but they removed it again after.
Could be 4.5 too, tho i'm not 100% sure, but i remember back with the Sensation that eventually a new Sense came that allowed rotation of Sense itself.

You're talking about Manila yeah? it was modded i.e. not that much sober..

I've got exactly the same issue on a UK SIM-free model. The Motion Launch gestures don't work either.
Did you get the issue sorted?

I got it swapped for a new device which works.
From what I understand the sensor was just broke. Don't know how though. It didn't seem like it was a software problem but more a hardware issue.
3 did the exchange after they had a little play with it. Was a quick swap.

That's good mate, I'm glad Three sorted it out for you.
Hope Amazon can help me out!

What a shame, sham
I have the same problem only I bought a privacy screen from Otterbox. I really dont want to swap for the Auto Rotate and G Sensor problem only to purchase another screen (Which I applied flawlessly). I have the Verizon HTC M9 Brand out of the box I had these issues. Its annoying when playing a game or trying to take a picture for it not to auto adjust the orientation. I've done the factory restore as the HTC rep suggested after I told him this happened out of the box I really feel like these support people don't listen to what the users are saying. Now I'm supposed to go back to my Verizon carrier and swap phones to setup again for the 3rd time... ridiculous!
Sidenote: this phone gets way too hot and the picture quality/stabilization is worse than the M8
lexx790 said:
Hi Guys,
So I got my M9 yesterday and its awesome. The ony problem is that it does not auto rotate.
I have turned auto rotate on and off, no diffrence.
I have done the G-sensor calibration tool in display settings. The top bar does not move (Guess thats the problem one).
I have loaded the phone up in safe mode and done the G-sensor thing. Still not working.
The only time the screen rotates is when a app forces it to rotate. like in a game, camera app, and youtube.
I only noticed this late last night.
I have yet to do a factory reset as I am at work. Once home I will give it a try.
Any one got any ideas?
Click to expand...
Click to collapse

htc one m9
I got the same thing my auto rotate work then stop working have re set my phone 3 time and it happening but my bf got same phone but he his don't

This may sound funny..I had the same issue with my new M9. Had it for about 3 weeks then the problem occured. I tried these steps to no avail:
1. Restart
2. remove installed apps
3. Calibrate
4. Calibrate on Safe mode
5. Reset phone to Factory
I was about to call HTC until I saw another dude posted an unusual solution.. I didn't pay attention to him because it was silly but it did fix mine.
During calibration, I noticed that the top sensor is not moving, only the one at the bottom.. WHat I did, While on the calibration page, I dropped my phone about 6 inches to the carpet..did it twice until you see the top sensor also move.Then do the calibration..I have a dot view case so I would prefer u to drop the corner with a protective case on it...
If you have warranty and you have timne, then call warranty support...
Cheers..

Marcel41 said:
This may sound funny..I had the same issue with my new M9. Had it for about 3 weeks then the problem occured. I tried these steps to no avail:
1. Restart
2. remove installed apps
3. Calibrate
4. Calibrate on Safe mode
5. Reset phone to Factory
I was about to call HTC until I saw another dude posted an unusual solution.. I didn't pay attention to him because it was silly but it did fix mine.
During calibration, I noticed that the top sensor is not moving, only the one at the bottom.. WHat I did, While on the calibration page, I dropped my phone about 6 inches to the carpet..did it twice until you see the top sensor also move.Then do the calibration..I have a dot view case so I would prefer u to drop the corner with a protective case on it...
If you have warranty and you have timne, then call warranty support...
Cheers..
Click to expand...
Click to collapse
Thanks. I can confirm this works. My top sensor was doing the same thing, i just slapped the phone in my hand about 10 times until that top sensor budged, then calibrated. rotate works now. :good:

Marcel41 said:
This may sound funny..I had the same issue with my new M9. Had it for about 3 weeks then the problem occured. I tried these steps to no avail:
1. Restart
2. remove installed apps
3. Calibrate
4. Calibrate on Safe mode
5. Reset phone to Factory
I was about to call HTC until I saw another dude posted an unusual solution.. I didn't pay attention to him because it was silly but it did fix mine.
During calibration, I noticed that the top sensor is not moving, only the one at the bottom.. WHat I did, While on the calibration page, I dropped my phone about 6 inches to the carpet..did it twice until you see the top sensor also move.Then do the calibration..I have a dot view case so I would prefer u to drop the corner with a protective case on it...
If you have warranty and you have timne, then call warranty support...
Cheers..
Click to expand...
Click to collapse
u make my day, i was one week thinking i can't fix it and will use it without auto rotated because it works only in one direction and then i read about here to hit my phone and boom it works in all direction!!! :good:
thanks!!