CyanogenMod is a free, community built distribution of Android 4.3 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM10 RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
FXP236 released
FXP237 released
Hi, there's any change from your releases and Cyanogem mod releases for Xperia ZL? I couldn't find any info about modifications made by FreeXperia Xperia. So i guess it is the same version as available at CM website, correct?
fabioascoelho said:
Hi, there's any change from your releases and Cyanogem mod releases for Xperia ZL? I couldn't find any info about modifications made by FreeXperia Xperia. So i guess it is the same version as available at CM website, correct?
Click to expand...
Click to collapse
depends
ususualy we test features on FXP builds then push to cm
FXP239 released
I was wondering, is there a particular reason why the phone (C6503) is unable to successfully connect, neither automatically nor manually to a given mobile network after a normal (lengthy) network search? I've had other people here report that they experience this very same problem on their ZL as well, both on 10.1 and 10.2. All it says is: "Cannot connect to this network right now. Try again later."
Another question is, would it be possible to add the network types (4G, 3G and 2G) beside each available network as it is displayed on original Sony Firmware? You can see an icon beside each network type you choose from. That way, if you need to use only one specific "tower" or band during a given time, you could do so, without having to manually switch the radio on or off between 4G, 3G and 2G manually.
I hope you get what I'm trying to say here...
Thank you FXP for your hard work and dedication. Your work is really appreciated. :thumbup:
:beer:
FXP said:
FXP239 released
Click to expand...
Click to collapse
Is it Stable release or Nightly?
"Nightly-ish" unless otherwise specified
Any chance to get new "Color/gamma calibration" feature working on fusion3 devices?
Does it need some kernel changes to be implemented first?
NeverGone\RU said:
Any chance to get new "Color/gamma calibration" feature working on fusion3 devices?
Does it need some kernel changes to be implemented first?
Click to expand...
Click to collapse
Very good question, I'd also like to know this.
Be nice if the libs etc. were updated to .67 and the audio paths fixed so Spirit FM has audio every boot not 1 in 3... and Autobrightness - works sometimes, not others!
I also find that building one's own CM 10.2 fails to boot fully since late September, gets as far as "Android is updating apps and loops - if anyone has any ideas... appreciated
LenAsh said:
Be nice if the libs etc. were updated to .67 and the audio paths fixed so Spirit FM has audio every boot not 1 in 3... and Autobrightness - works sometimes, not others!
I also find that building one's own CM 10.2 fails to boot fully since late September, gets as far as "Android is updating apps and loops - if anyone has any ideas... appreciated
Click to expand...
Click to collapse
i have 2.67 blob ready, but i need to test on Tab Z Wifi
Spirit FM ?
AutoBrightness is wonky, sometime sensor report wrong value i think sony have some kind of workaround somewhere
if it doesnt boot, it's your fault
My fault? Build is broken. If someone has changed something and not reflected it in the CM Wiki or on here, then that's a shame. Try it and see all the build errors and warnings.
Sent from my C6503 using XDA Premium 4 mobile app
LenAsh said:
My fault? Build is broken. If someone has changed something and not reflected it in the CM Wiki or on here, then that's a shame. Try it and see all the build errors and warnings.
Click to expand...
Click to collapse
buildbot seems to be better then u
imho, look the errors, but i'm pretty sure u miss something
Has the manifest changed? Repo syncs OK and the ROM builds but with many warnings and errors. This "problem" started a little over a week ago. I haven't changed the way I do this, so my only assumption is something has changed that is not reflected in the build guide. The GS3 and H One build fine...
To answer your query about Spirit FM, this is a good replacement FM radio app that's been around for a while. Since the stock CM FM Radio app is "flakey" Spirit provides a usable alternative. However, on CM (using the Digital audio path as the Analog audio doesn't work at all) it is a lottery whether any sound is produced without a reboot. I haven't been able to work out yet what conditions MIGHT cause this... sometimes a toast appears stating that xxxx couldn't start the media player. Once working, it works extremely well.
Hope that helps and look forward to your forthcoming updates for the Sony 2013 models.
Sent from my C6503 using XDA Premium 4 mobile app
Get this - trying the new repo release -
info: A new version of repo is available
object e76efdd7b342577c40aa271fa5ded9d66a783a9b
type commit
tag v1.12.4
tagger Conley Owens <[email protected]> 1380645867 -0700
repo 1.12.4
gpg: Signature made Tue 01 Oct 2013 17:44:27 BST using RSA key ID 692B382C
gpg: Can't check signature: public key not found
error: could not verify the tag 'v1.12.4'
warning: Skipped upgrade to unverified version
Syncing work tree: 100% (397/397), done.
EDIT: Build now works - shame the guy who updated it on the 1st October omitted to tell the world...
Thanks for the recent updates Giulio, appreciated.
Sent from my C6503 using XDA Premium 4 mobile app
Related
FreeXperia PROJECT
(Unlocked bootloader only)
CyanogenMod is a free, community built distribution of Android 4 (Ice Cream Sandwich) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Known issues being worked on:
* The recovery on first attempt fail to mount /system
* NONE
This build is nearly complete and should make it into the 9.0 final release on time. We are also actively working on CM10 for this device, Enjoy!
We suport following accesorries
LIVEVIEW http://www.sonyericsson.com/cws/products/accessories/overview/liveviewmicrodisplay?cc=gb&lc=en#a
LIVEWATCH http://www.sonyericsson.com/cws/products/accessories/overview/smartwatch?cc=gb&lc=en
ANT+ http://www.thisisant.com/pages/technology/what-is-ant-plus
If you want to contribute to FreeXperia Project you can access it on git
https://github.com/freexperia
if you want to support our work you can donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=THUJZQB2U5PNC
Our team is not responsable of any damage that you or you phone will suffer by using our work
DOWNLOAD
http://unrestrict.li/FXP
IMPOTANT
Unlocking device on unlock website or by testpoint voids your waranty !
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
This build is nearly complete and should make it into the 9.0 final release on time. We are also actively working on CM10 for this device, Enjoy!
ENJOY AN UNOFFICIAL CM9 RELEASE BROUGHT TO YOU BY FreeXperia Team
KERNEL SOURCE
https://github.com/CyanogenMod/sony-kernel-msm8660
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
Very few of us have unlocked boot loaders sadly mate :/.
Looks like fantastic work though
If only the bl was unlocked... The key is in here.... Somewhere in our hands...so deep....
Sent from my LT28at using xda premium
awesome news!!
any chance we can see some images and how it runs etc etc. ??
Bug?
FXP......can you guys confirm that whether the HDMI and touchscreen button LED light working?.... hence when im using some application like papago M9....it only starts the app but leave it with blackscreen.
faiisfaizal said:
FXP......can you guys confirm that whether the HDMI and touchscreen button LED light working?.... hence when im using some application like papago M9....it only starts the app but leave it with blackscreen.
Click to expand...
Click to collapse
Currently i'm running CM9 nightly 2012-10-07 , my device is LT28H.
I had found 3 bugs: HDMI is not working , touchscreen button LED light and 3G data.
1. HDMI: not woking
2. Touchscreen button led light: By going to Setting/Display/Brightness and then change the brightness, i can have the light turned on and stay awake. But after the phone go to sleep and back , it's turn off .
3. 3G data not working: after choosing network mode to LTE/GSM , it said the mode is LTE/WCDMA/GSM and data enabled, with correct APN , i can see the H icon near the signal icon . But i can't connect to internet . It works before with the stock rom (i have unlimited data plan)
Also it seems the audio quality is not so good as the stock rom, i'm not sure but i will recheck by reinstall the stock rom and wait for the new nightly build .
However, i really love Cyanogenmod and have been using for all of my device: Asus TF101 , TF300T , GT-N7000 , HTC Wildfire .... Thanks so much
I will help FreeXperia Team by reporting any bugs i can find with every nightly build you release.
Hope we will have a stable build for Ion soon
Www.KhoiDiem.Vn said:
Currently i'm running CM9 nightly 2012-10-07 , my device is LT28H.
I had found 3 bugs: HDMI is not working , touchscreen button LED light and 3G data.
1. HDMI: not woking
2. Touchscreen button led light: By going to Setting/Display/Brightness and then change the brightness, i can have the light turned on and stay awake. But after the phone go to sleep and back , it's turn off .
3. 3G data not working: after choosing network mode to LTE/GSM , it said the mode is LTE/WCDMA/GSM and data enabled, with correct APN , i can see the H icon near the signal icon . But i can't connect to internet . It works before with the stock rom (i have unlimited data plan)
Also it seems the audio quality is not so good as the stock rom, i'm not sure but i will recheck by reinstall the stock rom and wait for the new nightly build .
However, i really love Cyanogenmod and have been using for all of my device: Asus TF101 , TF300T , GT-N7000 , HTC Wildfire .... Thanks so much
I will help FreeXperia Team by reporting any bugs i can find with every nightly build you release.
Hope we will have a stable build for Ion soon
Click to expand...
Click to collapse
That what im having right now....
@FXP
1. The recovery is not able to access external sd.
2. Do we require this line in recovery.fstab
/boot emmc /dev/block/mmcblk0p3
Click to expand...
Click to collapse
3. I made the recovery.fstab and bootrec-device-fs to look like this
/cache ext4 /dev/block/mmcblk0p16
/data ext4 /dev/block/mmcblk0p17
/system ext4 /dev/block/mmcblk0p15
/sdcard vfat /dev/block/mmcblk1p1
/emmc vfat /dev/block/mmcblk0p18
Click to expand...
Click to collapse
mount /dev/block/mmcblk0p18 /emmc
Click to expand...
Click to collapse
I build the boot.img again. Now I am able to access the external_sd and able to flash files from it.
I have attached the boot.img.zip ... unzip and flash it, if some one wants to test it.
Let me know if this is ok.
i found a new bug. when i try to send a sms which contains more than 160 char (2 sms) , then it can't be sent. it said error. sms with less than 160 char is ok
hope you can fix it soon with the new nightly build
ps: is there any way to collect logs so i can send you for reporting?
Sent from my iPad using Tapatalk HD
Www.KhoiDiem.Vn said:
i found a new bug. when i try to send a sms which contains more than 160 char (2 sms) , then it can't be sent. it said error. sms with less than 160 char is ok
hope you can fix it soon with the new nightly build
ps: is there any way to collect logs so i can send you for reporting?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Yeah, there's a one here and a change log
http://code.google.com/p/freexperia/
FXP142 released
I was too busy so i couldn't install the newest nightly rom. Will try today and will inform you bugs asap
Sent from my LT28h using xda premium
After updating the updater-script file to include LT28i I was able to install it on my phone. Woot! I'm also experiencing the bad audio quality issue that others have reported, but otherwise things are great so far! So nice to be rid of all the bloat of the stock roms. On stock my phone constantly had memory management issues but that seems to be a thing of the past now. Sweet!
mroach said:
After updating the updater-script file to include LT28i I was able to install it on my phone. Woot! I'm also experiencing the bad audio quality issue that others have reported, but otherwise things are great so far! So nice to be rid of all the bloat of the stock roms. On stock my phone constantly had memory management issues but that seems to be a thing of the past now. Sweet!
Click to expand...
Click to collapse
Flash the attached zip. It improves the audio by notches. I don't take credit for it. Found it somewhere on XDA.
I have a LT28i with unlock bootloader and cwr can I install this Rom?and pls what about the boot.img I'm confused
Sent from my LT28i using xda premium
pafimal said:
I have a LT28i with unlock bootloader and cwr can I install this Rom?and pls what about the boot.img I'm confused
Sent from my LT28i using xda premium
Click to expand...
Click to collapse
extract it to ur destop ...turn off ur phone and connect it via fastboot...flash the boot.img to the phone
the sms >160 chars and button back light are still not fixed
ganeshbiyer said:
Flash the attached zip. It improves the audio by notches. I don't take credit for it. Found it somewhere on XDA.
Click to expand...
Click to collapse
It won't flash for me. I just get "can't open /sdcard/Sony_Bravia_n_XLoud_Engine_V2.zip (bad)". Not sure what to do about that one.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification​
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for the Asus TF300T with or without dock.
Special thanks to: XpLoDWilD, bumble-bee (for tf201 device tree from which this original tree was inspired), loganmc10, dasunsrule32, jruesga, cyanogenmod, pawitp, etc.....
recent changelog:
- DRM with widevine fixed (that makes google play movies work). Thx go to stargo!
Older changelog:
- f2fs added
Changelog for version 0.2:
- resync with CM-12
- sync kernel with lots of stuff from grouper (and/or thoemy's endeavoru).
Chris
Not working:
- dock battery status
- GPS orbit downloads
- some dock keys (including wake up by pressing dock keys)
Installation instructions:
- put zip on sdcard
- reboot to recovery (seems that you have to first: unmount /data).
- flash zip
- wipe (have not tried if upgrade from kitkat works and won't test this anyway)
For newer updates with CM updater and/or if you want f2fs, you might need a new recovery. Here is the cm recovery from 5-FEB-2015: recovery-cm-5-FEB-2015.img
Flash this with:
adb reboot bootloader
fastboot flash recovery recovery-cm-25-JAN-2015.img
fastboot reboot
Chris
CM12!
Get ready to flash!
Definitely worth a flash.
Dear chris,
Is it work on canvas 2 plus????
Chipset is mtk6589..
Waiting for your reply...
If not please work on this...
Thanking you..
I tried to encrypt the device. I Let it run for ~3 hours. Stuck on boot.
But great start
EDIT: SO Ill start testing this ROM now
Got my first reboot. And RIGHT now in this time of this writing my second reboot
Here is the first log. Second to come.
EDIT2: Second log added
Any developpement
@chrmhoffmann
I see you uploaded a huge bunch of patches for CM12. Thank you very much for all your efforts
[GER]Roxxor said:
@chrmhoffmann
I see you uploaded a huge bunch of patches for CM12. Thank you very much for all your efforts
Click to expand...
Click to collapse
No prob. I just re-synced the kernel with stuff from grouper. Those things are not really necessary for cm-12.0
EDIT: there's a new 0.2 version that has recent changes.
Chris
willing to try
I loaded the Omni version which worked but was a little slow - using ART not DALVIK. If anyone else tries this, I found the experience was interesting - you will have to choose a small(er) version of GAPPs to fit on the system partition. I used the version on the XDA PA-GAPPs site that was just over 200 MB in size. I'm back using CM11 because I use this puppy every day.
Official cm12 is out but no tf300
Selinux is not in enforced mode so I can't enable nightlies. That's a must for cm now. If any one can help me on that...
Chris
hi, just had a go with the rom seems very good but i couldnt connect to the internet, keep up the good work
thanks
chrmhoffmann said:
Selinux is not in enforced mode so I can't enable nightlies. That's a must for cm now. If any one can help me on that...
Chris
Click to expand...
Click to collapse
And how was that in cm11 then?
Sent from my TF300T using XDA Premium 4 mobile app
androidjel said:
And how was that in cm11 then?
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It was not a hard requirement to have Selinux enabled in cm-11.0. It is now a minimum requirement from CM.
BTW: I have fixed the major selinux denials now and the tf300t is now accepted on the official CM nightlies.
Chris
Since I installed cm snapshot 12 it won't appear any nightlies updates.. How can I search them with the cm updater?
igoigo said:
Since I installed cm snapshot 12 it won't appear any nightlies updates.. How can I search them with the cm updater?
Click to expand...
Click to collapse
Download a nightly and place it in the cmupdater folder. Go to your updater and flash the nightly that shows up. After reboot you will see nightly's again.
chrmhoffmann said:
It was not a hard requirement to have Selinux enabled in cm-11.0. It is now a minimum requirement from CM.
BTW: I have fixed the major selinux denials now and the tf300t is now accepted on the official CM nightlies.
Chris
Click to expand...
Click to collapse
So we will see cm12 official nightlies appear on cyanogenmod.org soon?
counterfeit187 said:
So we will see cm12 official nightlies appear on cyanogenmod.org soon?
Click to expand...
Click to collapse
Ones just finished being built downloading now
Thank you guys, for the awesome work you do!!!
Edit: Is there an installation guide?
I cant seem to get this to clean install
ricktendo said:
Thank you guys, for the awesome work you do!!!
Edit: Is there an installation guide?
I cant seem to get this to clean install
Click to expand...
Click to collapse
What's the issue? You should be able to flash this with the existing CWM recovery (from the CM11 thread).
Chris
CyanogenMod 13.0 is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Other Issues Not in Known Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the CM boot logo), use adb or any other file explorer tool to pull a copy of
/sys/fs/pstore/console-ramoops (command: adb pull /sys/fs/pstore/console-ramoops)
after the reboot and provide that.
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Download Links
CyanogenMod: ROM @ http://download.crpalmer.org/nightlies/pme/
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version. (make sure to use 64bit when using other packages), others might also be working
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Known Issues
Rear Camera Force Closes when enabling HDR
MTP not working
Magnet detection/Ice View not working
LED notification settings are available but don't work
SELinux is in permissive mode
Notification volume is too loud
?? Headphone volume is too loud? (I don't know what is normal on stock as I've never used them on stock...)
XDA:DevDB Information
CyanogenMod 13.0, ROM for the HTC 10
Contributors
crpalmer, squid2, raymanfx
Source Code: https://github.com/CyanogenMod/android_kernel_htc_msm8996
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2016-09-20
Last Updated 2016-11-05
Reserved
reserved
Thanks for thread and ROM.
Use Google Camera for front camera. Perfect running.
Gesendet von meinem HTC 10 mit Tapatalk
morpheus620 said:
Thanks for thread and ROM.
Use Google Camera for front camera. Perfect running.
Gesendet von meinem HTC 10 mit Tapatalk
Click to expand...
Click to collapse
That's good news!
Sent from my HTC 10 using XDA-Developers mobile app
Fyi I can't get the download link to work. It loops back to itself, asking me to choose which app to open it with over and over
@crpalmer ... You are a god among men. I saw why you posted this thread in another thread, and would like to thank you for the harm reduction measures on behalf of the whole community.
stonew5082 said:
Fyi I can't get the download link to work. It loops back to itself, asking me to choose which app to open it with over and over
Click to expand...
Click to collapse
I screwed up the link, fixed the op now I hope.
I hate to be that guy but does or will this boot on all variants? I.e. sprint, Verizon etc.
jmkarnai01 said:
I hate to be that guy but does or will this boot on all variants? I.e. sprint, Verizon etc.
Click to expand...
Click to collapse
I've been told it boots and functions if you flash the latest US Unlocked firmware, minus the radio.
Captain_Throwback said:
I've been told it boots and functions if you flash the latest US Unlocked firmware, minus the radio.
Click to expand...
Click to collapse
Didn't really want to mess with firmware being on sprint and all, but maybe I just need to dive right in. One question, how will that affect me going back to sense?
jmkarnai01 said:
Didn't really want to mess with firmware being on sprint and all, but maybe I just need to dive right in. One question, how will that affect me going back to sense?
Click to expand...
Click to collapse
It might have no effect at all. I'm not on Sprint, so I'm not the person to ask.
Using MultiRom to boot the 0920 snapshot. Home button does not function as home. I press it and it doesn't go home. Is this because of Ex kernel I am using at the top level in MultiRom? I remember someone having this trouble with Ex kernel and CM.
Does someone remember having patch I can apply on top of Ex kernel (I am building it myself) to get this working? I remember it was a single line patch.
devsk said:
Using MultiRom to boot the 0920 snapshot. Home button does not function as home. I press it and it doesn't go home. Is this because of Ex kernel I am using at the top level in MultiRom? I remember someone having this trouble with Ex kernel and CM.
Does someone remember having patch I can apply on top of Ex kernel (I am building it myself) to get this working? I remember it was a single line patch.
Click to expand...
Click to collapse
Yeah the kernel causes this. Not sure about the patch sadly
devsk said:
Using MultiRom to boot the 0920 snapshot. Home button does not function as home. I press it and it doesn't go home. Is this because of Ex kernel I am using at the top level in MultiRom? I remember someone having this trouble with Ex kernel and CM.
Does someone remember having patch I can apply on top of Ex kernel (I am building it myself) to get this working? I remember it was a single line patch.
Click to expand...
Click to collapse
You can try elitekernel. It's based on EX and he has patched the home button as well.
Edit: I guess this was the change
https://github.com/Elite-Kernels/HTC-10/commit/defb8a468268f757c5ce3ddf7c09ff4738282e9c
Hi, can you post any changelog when you upload a new build please? just a .txt file with same name in order to know what's new on each build
Thanks
fabiere said:
Hi, can you post any changelog when you upload a new build please? just a .txt file with same name in order to know what's new on each build
Thanks
Click to expand...
Click to collapse
Hey buddy,
For the changelog Mr. Palmer has mentioned to go to Gerrit (http://review.cyanogenmod.org/)
The specific section for HTC 10 changes are as follows (http://review.cyanogenmod.org/#/q/project:CyanogenMod/android_device_htc_pme).
It will be easier to look there as if will have all the relevant changes you need. He may look to put up a change log when we are closer to or at a stable build.
Sent from my HTC 10 using XDA Labs
rav101 said:
Hey buddy,
For the changelog Mr. Palmer has mentioned to go to Gerrit (http://review.cyanogenmod.org/)
The specific section for HTC 10 changes are as follows (http://review.cyanogenmod.org/#/q/project:CyanogenMod/android_device_htc_pme).
It will be easier to look there as if will have all the relevant changes you need. He may look to put up a change log when we are closer to or at a stable build.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Ok thanks, sorry i haven't understand this correctly, thanks for your explanations
Hi.
can I dirty flash that over Captain_Throwbacks CM13 build?
Hello, this ROM for which version of HTC 10 is compatible?
perfume_uhl, perfume_whl or perfume_wl?? Thanks you very much!
Unofficial LineageOS 14.1 for Sony Z1 Compact
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
General
This is an unofficial LineageOS 14.1 as is build for the Sony Z1 Compact, (Amami/D5503).
The builds will be builds when i want it, as long as LineageOS updates and support LineageOS 14.1 or when it goes official.
I won't include features that I dislike. If u want something else, build it.
Install
How to install:
New Install (coming from another ROM)
Do a full backup with your favorite latest Nougat compatible recovery (3.1.0.0 ATM)!
Download the Rom zip and an OpenGapps file for 7.1.2, 32 bit, Arm
Do a full wipe in recovery (data/factory reset, system)
Install the Rom zip and Gapps zip through recovery compatible with Nougat!
Enjoy!
Coming from previous version of LOS14.1
Do a full backup with your favorite latest Nougat compatible recovery!(optional, for if things go wrong)
Download the Rom zip
Install the Rom zip (and Gapps if getting erros with Google services) through recovery compatible with Nougat!
Enjoy!
Downloads
Latest-Rom: lineage-11-20170810-UNOFFICIAL-smi.zip
XDA Download Section
Github Version number is different
Project manifest
Manifest/Roomservice
Bugs/Issues
HW overlay needs to be disabled for some full screen video applications and front camera
Bluetooth may not work as expected
Reboot to recovery doesn't always work
Needs a compatible recovery to install
Camera may not work 100%
Will never pass full CTS test?
Wifi starts without data connection after reboot
NFC HCE will maybe never be supported, used for android pay
Thanks and credits
SpiritCroc
SuperLamic
All MSM8974 Maintainers
Sony (OSS)
LineageOS
All the rest that have helped to construct these builds and develop software for Z1 Compact directly or indirectly in the past.
XDA:DevDB Information
Unofficial LineageOS 14.1, ROM for the Sony Xperia Z1 Compact
Contributors
Hazou
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Testing
Current Beta Version: lineage-14.1-2017080
Beta Release Date: 2017-08-10
Created 2017-07-14
Last Updated 2017-08-10
Hazou said:
Unofficial LineageOS 14.1 for Sony Z1 Compact
I won't include features that I dislike. If u want something else, build it.
2017-07-14
Click to expand...
Click to collapse
Nice, thanks. Could you summarize which features you did implement? I'm currently using LOS by Micha-Btz, and it's working great,but I might try this out if it's any different...
levone1 said:
Nice, thanks. Could you summarize which features you did implement? I'm currently using LOS by Micha-Btz, and it's working great,but I might try this out if it's any different...
Click to expand...
Click to collapse
Can't say for sure what he changes. Not all his repos are open to public.
This version is the latest updated version of lineage, at the time of build. With all the newest changes from the msm8974 maintainers to get a working Android 7.1.2 on this device. The only extra difference is that I included the smartcard API, so u could use NFC pay with a compatibele sim card.
Hazou said:
Unofficial LineageOS 14.1 for Sony Z1 Compact
Click to expand...
Click to collapse
Which kernel does this ROM use? I can't find a repository at your GitHub
Might be a good idea to link to these sources from OP as public sources are required by GPL.
Btw, this information seems to be wrong
Hazou said:
Downloads
Latest-Rom: lineage-11-20170227-UNOFFICIAL-smi.zip
Click to expand...
Click to collapse
hahnjo said:
Which kernel does this ROM use? I can't find a repository at your GitHub
Might be a good idea to link to these sources from OP as public sources are required by GPL.
Btw, this information seems to be wrong
Click to expand...
Click to collapse
Thx for sharing. Will add them right away. They are indeed not on mine or lineage GitHub. The kernel source is on another GitHub. Will add a local_manifests to the message.
Thx. Works great so far.
My findings:
- original Sony camera app has that hw overlay issue.
- automatic brightness seems to be calibrated to bright
- wlan works smoothly (current aicp has has issues with that)
Not tested Bluetooth yet
Regards
Update:
[2] lineage-14.1-20170721-UNOFFICIAL-amami.zip
Fixes:
Audio_effect fix
A tiny bit better battery life
Fix nightly reboot when charging
Thermal improvements in config
LineageOS changes
Known bugs:
HW overlay needs to be disabled for some full screen video applications
Bluetooth may not work as expected
Reboot to recovery doesn't always work
Needs a compatible recovery to install
Camera may not work 100%
Will never pass full CTS test?
Wifi starts without data connection after reboot
NFC HCE will maybe never be supported, used for android pay
Great firmware!
Problems with lineage-14.1-20170721-UNOFFICIAL-amami.zip
- I still get nightly (while recharging) and some times random reboots
- HW Overlay with Camera
I didnt have any other issues yet
@Hazou thanks for your work! This device still can work well and thanks for support LOS!
Pardon, is it possible to have this feature enabled to receive mms when data is disabled? It can be much of annoyance and inconvenience to have data always be turned on for those with limited data or having to turn data on and of manually just to receive mms
https://review.lineageos.org/#/c/172853/ I can beta test a patch if need, very useful feature. This device deserves a good maintainer like you!
Thanks again sir for attention!
echo124 said:
@Hazou thanks for your work! This device still can work well and thanks for support LOS!
Pardon, is it possible to have this feature enabled to receive mms when data is disabled? It can be much of annoyance and inconvenience to have data always be turned on for those with limited data or having to turn data on and of manually just to receive mms
https://review.lineageos.org/#/c/172853/ I can beta test a patch if need, very useful feature. This device deserves a good maintainer like you!
Thanks again sir for attention!
Click to expand...
Click to collapse
Thank you, But I am not alone Doing this stuff with many others
And yes, we could implement this, than u need to test it, will have a look at it for next update
Hazou said:
Thank you, But I am not alone Doing this stuff with many others
And yes, we could implement this, than u need to test it, will have a look at it for next update
Click to expand...
Click to collapse
Great, will test and thans much to all developers for their time and awesome work! Thanks for this very much!
is the gps working?
- GPS works
- HWOverlay needs to be disabled for Cam or Youtube
- Nightly reboots if the phone is charging over night - even with 21.07.2017 version
Hopefully the team could fix it. Great work so far
Frash said:
- GPS works
- HWOverlay needs to be disabled for Cam or Youtube
- Nightly reboots if the phone is charging over night - even with 21.07.2017 version
Hopefully the team could fix it. Great work so far
Click to expand...
Click to collapse
Yup, we are working on them. Just takes a lot off time to debug and find the issue. Also it's holiday season; sun, beach, party
New version 8-10
Changelog:
3AM bug solved
Touch firmware update (changed to stock amami)
Time correctly set at boot
Update in media codecs/profiles
BLE peripheral mode enabled
Network type change and search should be fixed
Thanks for the update!
Thanks for the update, Hazou!
Unfortunately, changing of network operator does not work with my 2 SIM cards.
I can change the network type and search for network operators, but changing the network operator is not possible.
I have tested various ROMs (AICP, Lineage - yours and Micha-Btz - and Paranoidandroid, v6.03).
Only with the stock Rom and with Paranoidandroid I can change the network operator.
The problem seems related to accessing the SIM card (at least my SIM cards). When the Z1C can read the contacts stored on a SIM card, I can also change the network operator.
Can you change the network operator without problem?
Hi Hazou,
there also seems to be a problem with the telephone function if you toggle the loudspeaker or the mute button during a call.
Once you click mute and enable the mic again, it will stay muted... Same problem seems with the loudspeaker button from time to time.
Would be great if this could be fixed.
Good work! It is really appreciated!
Hi Hazou,
I have also a problem with telephone calls. The microphone seems always to be muted.
When I use Google Duo or WhatsApp Calls if works flawlessly.
The reboot bug while charging is also still existant.
Bisides that: Nice work, thanks for that.