FreeXperia PROJECT
(Unlocked bootloader only)
CyanogenMod is a free, community built distribution of Android 4 (Ice Cream Sandwich) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Known issues being worked on:
* The recovery on first attempt fail to mount /system
* NONE
This build is nearly complete and should make it into the 9.0 final release on time. We are also actively working on CM10 for this device, Enjoy!
We suport following accesorries
LIVEVIEW http://www.sonyericsson.com/cws/products/accessories/overview/liveviewmicrodisplay?cc=gb&lc=en#a
LIVEWATCH http://www.sonyericsson.com/cws/products/accessories/overview/smartwatch?cc=gb&lc=en
ANT+ http://www.thisisant.com/pages/technology/what-is-ant-plus
If you want to contribute to FreeXperia Project you can access it on git
https://github.com/freexperia
if you want to support our work you can donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=THUJZQB2U5PNC
Our team is not responsable of any damage that you or you phone will suffer by using our work
DOWNLOAD
http://unrestrict.li/FXP
IMPOTANT
Unlocking device on unlock website or by testpoint voids your waranty !
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
This build is nearly complete and should make it into the 9.0 final release on time. We are also actively working on CM10 for this device, Enjoy!
ENJOY AN UNOFFICIAL CM9 RELEASE BROUGHT TO YOU BY FreeXperia Team
KERNEL SOURCE
https://github.com/CyanogenMod/sony-kernel-msm8660
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
Very few of us have unlocked boot loaders sadly mate :/.
Looks like fantastic work though
If only the bl was unlocked... The key is in here.... Somewhere in our hands...so deep....
Sent from my LT28at using xda premium
awesome news!!
any chance we can see some images and how it runs etc etc. ??
Bug?
FXP......can you guys confirm that whether the HDMI and touchscreen button LED light working?.... hence when im using some application like papago M9....it only starts the app but leave it with blackscreen.
faiisfaizal said:
FXP......can you guys confirm that whether the HDMI and touchscreen button LED light working?.... hence when im using some application like papago M9....it only starts the app but leave it with blackscreen.
Click to expand...
Click to collapse
Currently i'm running CM9 nightly 2012-10-07 , my device is LT28H.
I had found 3 bugs: HDMI is not working , touchscreen button LED light and 3G data.
1. HDMI: not woking
2. Touchscreen button led light: By going to Setting/Display/Brightness and then change the brightness, i can have the light turned on and stay awake. But after the phone go to sleep and back , it's turn off .
3. 3G data not working: after choosing network mode to LTE/GSM , it said the mode is LTE/WCDMA/GSM and data enabled, with correct APN , i can see the H icon near the signal icon . But i can't connect to internet . It works before with the stock rom (i have unlimited data plan)
Also it seems the audio quality is not so good as the stock rom, i'm not sure but i will recheck by reinstall the stock rom and wait for the new nightly build .
However, i really love Cyanogenmod and have been using for all of my device: Asus TF101 , TF300T , GT-N7000 , HTC Wildfire .... Thanks so much
I will help FreeXperia Team by reporting any bugs i can find with every nightly build you release.
Hope we will have a stable build for Ion soon
Www.KhoiDiem.Vn said:
Currently i'm running CM9 nightly 2012-10-07 , my device is LT28H.
I had found 3 bugs: HDMI is not working , touchscreen button LED light and 3G data.
1. HDMI: not woking
2. Touchscreen button led light: By going to Setting/Display/Brightness and then change the brightness, i can have the light turned on and stay awake. But after the phone go to sleep and back , it's turn off .
3. 3G data not working: after choosing network mode to LTE/GSM , it said the mode is LTE/WCDMA/GSM and data enabled, with correct APN , i can see the H icon near the signal icon . But i can't connect to internet . It works before with the stock rom (i have unlimited data plan)
Also it seems the audio quality is not so good as the stock rom, i'm not sure but i will recheck by reinstall the stock rom and wait for the new nightly build .
However, i really love Cyanogenmod and have been using for all of my device: Asus TF101 , TF300T , GT-N7000 , HTC Wildfire .... Thanks so much
I will help FreeXperia Team by reporting any bugs i can find with every nightly build you release.
Hope we will have a stable build for Ion soon
Click to expand...
Click to collapse
That what im having right now....
@FXP
1. The recovery is not able to access external sd.
2. Do we require this line in recovery.fstab
/boot emmc /dev/block/mmcblk0p3
Click to expand...
Click to collapse
3. I made the recovery.fstab and bootrec-device-fs to look like this
/cache ext4 /dev/block/mmcblk0p16
/data ext4 /dev/block/mmcblk0p17
/system ext4 /dev/block/mmcblk0p15
/sdcard vfat /dev/block/mmcblk1p1
/emmc vfat /dev/block/mmcblk0p18
Click to expand...
Click to collapse
mount /dev/block/mmcblk0p18 /emmc
Click to expand...
Click to collapse
I build the boot.img again. Now I am able to access the external_sd and able to flash files from it.
I have attached the boot.img.zip ... unzip and flash it, if some one wants to test it.
Let me know if this is ok.
i found a new bug. when i try to send a sms which contains more than 160 char (2 sms) , then it can't be sent. it said error. sms with less than 160 char is ok
hope you can fix it soon with the new nightly build
ps: is there any way to collect logs so i can send you for reporting?
Sent from my iPad using Tapatalk HD
Www.KhoiDiem.Vn said:
i found a new bug. when i try to send a sms which contains more than 160 char (2 sms) , then it can't be sent. it said error. sms with less than 160 char is ok
hope you can fix it soon with the new nightly build
ps: is there any way to collect logs so i can send you for reporting?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Yeah, there's a one here and a change log
http://code.google.com/p/freexperia/
FXP142 released
I was too busy so i couldn't install the newest nightly rom. Will try today and will inform you bugs asap
Sent from my LT28h using xda premium
After updating the updater-script file to include LT28i I was able to install it on my phone. Woot! I'm also experiencing the bad audio quality issue that others have reported, but otherwise things are great so far! So nice to be rid of all the bloat of the stock roms. On stock my phone constantly had memory management issues but that seems to be a thing of the past now. Sweet!
mroach said:
After updating the updater-script file to include LT28i I was able to install it on my phone. Woot! I'm also experiencing the bad audio quality issue that others have reported, but otherwise things are great so far! So nice to be rid of all the bloat of the stock roms. On stock my phone constantly had memory management issues but that seems to be a thing of the past now. Sweet!
Click to expand...
Click to collapse
Flash the attached zip. It improves the audio by notches. I don't take credit for it. Found it somewhere on XDA.
I have a LT28i with unlock bootloader and cwr can I install this Rom?and pls what about the boot.img I'm confused
Sent from my LT28i using xda premium
pafimal said:
I have a LT28i with unlock bootloader and cwr can I install this Rom?and pls what about the boot.img I'm confused
Sent from my LT28i using xda premium
Click to expand...
Click to collapse
extract it to ur destop ...turn off ur phone and connect it via fastboot...flash the boot.img to the phone
the sms >160 chars and button back light are still not fixed
ganeshbiyer said:
Flash the attached zip. It improves the audio by notches. I don't take credit for it. Found it somewhere on XDA.
Click to expand...
Click to collapse
It won't flash for me. I just get "can't open /sdcard/Sony_Bravia_n_XLoud_Engine_V2.zip (bad)". Not sure what to do about that one.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
CyanogenMod is a free, community built distribution of Android 4.3 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
HOWTO
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
for update just flash rom zip from recovery
Google Apps are not included in this ROM. You'll need to find those yourself if you want them.
ENJOY AN UNOFFICIAL CM10 RELEASE BROUGHT TO YOU BY FreeXperia Team
PLEASE DONT MIRROR OUR ROMS
DOWNLOAD
http://unrestrict.li/FXP
thanks to all who made this possible supporting us
contributing with code, donations or even trusting us
thanks to SONY that made all this possible !
FXP236 released
FXP237 released
Hi, there's any change from your releases and Cyanogem mod releases for Xperia ZL? I couldn't find any info about modifications made by FreeXperia Xperia. So i guess it is the same version as available at CM website, correct?
fabioascoelho said:
Hi, there's any change from your releases and Cyanogem mod releases for Xperia ZL? I couldn't find any info about modifications made by FreeXperia Xperia. So i guess it is the same version as available at CM website, correct?
Click to expand...
Click to collapse
depends
ususualy we test features on FXP builds then push to cm
FXP239 released
I was wondering, is there a particular reason why the phone (C6503) is unable to successfully connect, neither automatically nor manually to a given mobile network after a normal (lengthy) network search? I've had other people here report that they experience this very same problem on their ZL as well, both on 10.1 and 10.2. All it says is: "Cannot connect to this network right now. Try again later."
Another question is, would it be possible to add the network types (4G, 3G and 2G) beside each available network as it is displayed on original Sony Firmware? You can see an icon beside each network type you choose from. That way, if you need to use only one specific "tower" or band during a given time, you could do so, without having to manually switch the radio on or off between 4G, 3G and 2G manually.
I hope you get what I'm trying to say here...
Thank you FXP for your hard work and dedication. Your work is really appreciated. :thumbup:
:beer:
FXP said:
FXP239 released
Click to expand...
Click to collapse
Is it Stable release or Nightly?
"Nightly-ish" unless otherwise specified
Any chance to get new "Color/gamma calibration" feature working on fusion3 devices?
Does it need some kernel changes to be implemented first?
NeverGone\RU said:
Any chance to get new "Color/gamma calibration" feature working on fusion3 devices?
Does it need some kernel changes to be implemented first?
Click to expand...
Click to collapse
Very good question, I'd also like to know this.
Be nice if the libs etc. were updated to .67 and the audio paths fixed so Spirit FM has audio every boot not 1 in 3... and Autobrightness - works sometimes, not others!
I also find that building one's own CM 10.2 fails to boot fully since late September, gets as far as "Android is updating apps and loops - if anyone has any ideas... appreciated
LenAsh said:
Be nice if the libs etc. were updated to .67 and the audio paths fixed so Spirit FM has audio every boot not 1 in 3... and Autobrightness - works sometimes, not others!
I also find that building one's own CM 10.2 fails to boot fully since late September, gets as far as "Android is updating apps and loops - if anyone has any ideas... appreciated
Click to expand...
Click to collapse
i have 2.67 blob ready, but i need to test on Tab Z Wifi
Spirit FM ?
AutoBrightness is wonky, sometime sensor report wrong value i think sony have some kind of workaround somewhere
if it doesnt boot, it's your fault
My fault? Build is broken. If someone has changed something and not reflected it in the CM Wiki or on here, then that's a shame. Try it and see all the build errors and warnings.
Sent from my C6503 using XDA Premium 4 mobile app
LenAsh said:
My fault? Build is broken. If someone has changed something and not reflected it in the CM Wiki or on here, then that's a shame. Try it and see all the build errors and warnings.
Click to expand...
Click to collapse
buildbot seems to be better then u
imho, look the errors, but i'm pretty sure u miss something
Has the manifest changed? Repo syncs OK and the ROM builds but with many warnings and errors. This "problem" started a little over a week ago. I haven't changed the way I do this, so my only assumption is something has changed that is not reflected in the build guide. The GS3 and H One build fine...
To answer your query about Spirit FM, this is a good replacement FM radio app that's been around for a while. Since the stock CM FM Radio app is "flakey" Spirit provides a usable alternative. However, on CM (using the Digital audio path as the Analog audio doesn't work at all) it is a lottery whether any sound is produced without a reboot. I haven't been able to work out yet what conditions MIGHT cause this... sometimes a toast appears stating that xxxx couldn't start the media player. Once working, it works extremely well.
Hope that helps and look forward to your forthcoming updates for the Sony 2013 models.
Sent from my C6503 using XDA Premium 4 mobile app
Get this - trying the new repo release -
info: A new version of repo is available
object e76efdd7b342577c40aa271fa5ded9d66a783a9b
type commit
tag v1.12.4
tagger Conley Owens <[email protected]> 1380645867 -0700
repo 1.12.4
gpg: Signature made Tue 01 Oct 2013 17:44:27 BST using RSA key ID 692B382C
gpg: Can't check signature: public key not found
error: could not verify the tag 'v1.12.4'
warning: Skipped upgrade to unverified version
Syncing work tree: 100% (397/397), done.
EDIT: Build now works - shame the guy who updated it on the 1st October omitted to tell the world...
Thanks for the recent updates Giulio, appreciated.
Sent from my C6503 using XDA Premium 4 mobile app
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CyanogenMod 11 - Android 4.4 (4.4.2 as of 12/12/2013) Kitkat builds
Sauce: https://github.com/CyanogenMod
Downloads
ROM: http://download.cyanogenmod.org/?device=p1/URL]
Installation
Note: this ROM uses the same partition layout as previous CyanogenMod builds.
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the build again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
PSA: No need to repartition to use art
All you need to do is set a property (dalvik.vm.dexopt-data-only) to 1
You can add the below line to /data/local.prop, that will keep the property set.
Code:
dalvik.vm.dexopt-data-only=1
cdesai said:
PSA: No need to repartition to use art
All you need to do is set a property (dalvik.vm.dexopt-data-only) to 1
You can add the below line to /data/local.prop, that will keep the property set.
Code:
dalvik.vm.dexopt-data-only=1
Click to expand...
Click to collapse
I can' t find data/local.prop. i made some mistake or i have to create the file?
Sorry for dummy question...
Sent from my GT-P1000 using xda app-developers app
summerofciuccio said:
I can' t find data/local.prop. i made some mistake or i have to create the file?
Sorry for dummy question...
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes, you must create one in /data, give a name: local.prop, add the line, change to art, reboot.. and thank you to cdesai
storm31 said:
Yes, you must create one in /data, give a name: local.prop, add the line, change to art, reboot.. and thank you to cdesai
Click to expand...
Click to collapse
thank you very much, you, cdesai and other dev are awesome... :laugh:
the vibrator is not working, am I wrong?
Just booted to ART on cm-11-20131208-NIGHTLY-p1 + Banks Gapps. Took about 5 minutes to boot from bootscreen and 15 minutes to update the apps. So far so good, things are going smooth. Thanks for this, no need to repartition now Keep up the good work!!!
How long it takes to update to ART? I think my tab has already been about 20 min in boot animation...
Edit: it has been in boot animation over 40 min. Force rebooting...
Qqqxxxzzz said:
How long it takes to update to ART? I think my tab has already been about 20 min in boot animation...
Edit: it has been in boot animation over 40 min. Force rebooting...
Click to expand...
Click to collapse
if you dony have many apps installed before converting to ART, it should take about 10-15 mins. it goes to boot animation, and then optimizig apps screen. 40 mins is too much. perhaps you haven't added that line in post 2.
DroidTalk said:
if you dony have many apps installed before converting to ART, it should take about 10-15 mins. it goes to boot animation, and then optimizig apps screen. 40 mins is too much. perhaps you haven't added that line in post 3.
Click to expand...
Click to collapse
I think added that line, If it doesn't boot after reboot I will check that it.
Edit: not booting...
Edit: I do have /data/local.prop with dalvik.vm.dexopt-data-only=1 in it
Edit: I think I do clean reinstall and try to use ART after that.
Edit: factory reset -> reinstall rom + gapps -> turn ART on and reboot -> stuck again -> added /data/local.prop with that line -> reboot -> optimizing apps -> everything crashes -> force reboot -> optimizing again -> 1. systemui crash, 2. Themes provider crash 3. com.android.phone crash... -> force reboot -> optimizing -> same crashes... -> shutting down...
Got ART working, this time I did clean install (without gapps and with older nightly), added /data/local.prop, set ART on and rebooted.
No list of "working" and "not working" things this time?
Sent from my GT-I9505 using xda app-developers app
@cdesai do you or CyanogenMod have any plans for the p1c? ive heard that the main isue is cdma so even if it is a wifi only rom its atleast a start
also i was wondering, could someone flash a p1 rom on a p1c device that is being used only as a wifi tablet because the contract ended?
or is there something with the kernel that wouldn't let the p1c device boot using a p1 rom?
btw i just notice the thread name says " CyangenMod" and not "CyanogenMod" just a heads up :good:
bunchies said:
@cdesai do you or CyanogenMod have any plans for the p1c? ive heard that the main isue is cdma so even if it is a wifi only rom its atleast a start
also i was wondering, could someone flash a p1 rom on a p1c device that is being used only as a wifi tablet because the contract ended?
or is there something with the kernel that wouldn't let the p1c device boot using a p1 rom?
btw i just notice the thread name says " CyangenMod" and not "CyanogenMod" just a heads up :good:
Click to expand...
Click to collapse
I have a GSM device, and the CDMA device's hardware has differences from the GSM version, so no, you can't just flash a GSM build on a CDMA device, even if you're using it as a wifi-only tablet - it just won't work.
Both devices use a different kernel, and different kernel version even (GSM has moved the aries kernel - aka what Galaxy S uses, whereas CDMA still has it's own, older version)
Thanks for the great work. I have 2 questions:
1. Where can I download the Gapps for this version? I've tried several versions and in all of them I got errors regarding Google apps.
2. Is 3G (networking) fully functional?
manewinho said:
Thanks for the great work. I have 2 questions:
1. Where can I download the Gapps for this version? I've tried several versions and in all of them I got errors regarding Google apps.
2. Is 3G (networking) fully functional?
Click to expand...
Click to collapse
1. You can download BaNkS' gapps from http://forum.xda-developers.com/showthread.php?t=2012857
2. 3G is fully working
Hope this helps.
chajang said:
1. You can download BaNkS' gapps from http://forum.xda-developers.com/showthread.php?t=2012857
2. 3G is fully working
Hope this helps.
Click to expand...
Click to collapse
Gapps Core or Gapps Standard?
Launcher 3 reset sd moved apps from home page @ every restart or after every of connection with pc...
Sent from my GT-P1000 using xda app-developers app
manewinho said:
Gapps Core or Gapps Standard?
Click to expand...
Click to collapse
It's depend on you. If you want to taste the full Google Experience such as GoogleSearchHome (integrated with Google Now) you must choose GApps Standard. But GApps Core only install Google Service.
I can't understand why people wants to move to ART so fast... It's well known that most apps doesn't plays well with ART yet, so it's much better to not use ART for some time until apps adopts it massively.
Temasek's UNOFFICIAL CM13 BUILDS
This is the UNOFFICIAL Build of Temasek based on CM13.
DISCLAIMER
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
STUFFS THAT ARE WORKING
- RIL
- Mic
- FFMPEG Drivers
- Sound (Speaker and Headset)
- LED
- Thermal Manager
- Audio and Video Decoders/Encoders [HW Partially Broken]
- WiFi
- Bluetooth
- Mobile Data connection
- Camera (but takes pictures in bad quality and is laggy , which is excepted!)
**Note**
YOU NEED TO HAVE AN UNLOCKED BOOTLOADER TO FLASH THIS ROM!!
Now Welcome To Download Section
Here is The Link: https://www.androidfilehost.com/?w=files&flid=50951
Now to the INSTALLATION part
**The lastest version TWRP (3.0) is recommended or Philz CWM.
1. Download the ROM.
2. Download the appropriate GApps. (Personally I use open GApps)
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. If your using C6902 then flash the modem fille created by @MightyBear007.
11. Reboot your device.
12. And Enjoy/
CHANGELOG
Source Code: https://github.com/temasek
Kernel Source: https://github.com/CyanogenMod/android_kernel_sony_msm
CREDITS
@temasek
@Men_in_black007
@MZO
** I will try to provide updates as soon as new build comes. And as I am just 15 I need to concentrate on my school also.**
Please THANK if you like this ROM and my WORK.
Reserved
Finally ?
I see a camera commit in the CM Gerrit...is it merged in this build?
drakonizer said:
I see a camera commit in the CM Gerrit...is it merged in this build?
Click to expand...
Click to collapse
@drakonizer oh not yet buddy. As camera is still on alpha stage and it lags a lot. I will add camera maybe after few builds when it becomes more stable.
Awesome to hear that there are still developers working on the z1 thank you so much for creating this. I really dont want to buy a new phone just to use android m as daily driver. Cant wait till you get evrything working.
#NEW BUILD is available.
Changelog in settings/about/changelog
Wifi and bluetooth has been fixed and is a lot more stable.
A Question: Do u guys want me to upload the rom to Dev-Host or do u guys prefer AndroidFileHost? Let me know.
Enjoy.
markakash said:
#NEW BUILD is available.
Changelog in settings/about/changelog
Wifi and bluetooth has been fixed and is a lot more stable.
A Question: Do u guys want me to upload the rom to Dev-Host or do u guys prefer AndroidFileHost? Let me know.
Enjoy.
Click to expand...
Click to collapse
Good Work Brother
Awsome rom
I will test it tonight
I prefer Afh
IMHO @markakash Android file host is better ?
mobile data not working
Hello,
i've just test the rom, i confirm mobile data not working on C6903.
Thanks
Hello everyone i checked and ur right mobile data isnt working. I will fix it in next update hopefully.
markakash said:
Hello everyone i checked and ur right mobile data isnt working. I will fix it in next update hopefully.
Click to expand...
Click to collapse
Please add the camera too...I tried it on AOKP, its barely usable yes, but still works at least for basic stuff. Thanks!
Sent using XDA One
drakonizer said:
Please add the camera too...I tried it on AOKP, its barely usable yes, but still works at least for basic stuff. Thanks!
Sent using XDA One
Click to expand...
Click to collapse
@drakonizer i would really like to add it. As i m still a learner and a beginner i will do my best to add new stuffs as soon as possible. I will let u know when i will add the camera.
Regards.
I want to go back to 5.1, there is no twrp recovere in this rom, how can I install it?
looking at the op it says data is working but can anyone running the rom confirm it?
MrOsamaful said:
I want to go back to 5.1, there is no twrp recovere in this rom, how can I install it?
Click to expand...
Click to collapse
When sony logo apears press volume up button
And you will see twrp
#NEW BUILD IS AVAILABLE
*Backlight issue has been fixed hopefully
And sorry to say but i have not been able to fix Mobile Data Connection yet.
#If u want complete changelog go into Settings/Aboutphone/Changelog
The ROM feels a lot smoother.
Enjoy.
Regards
Akash
markakash said:
#NEW BUILD IS AVAILABLE
*Backlight issue has been fixed hopefully
And sorry to say but i have not been able to fix Mobile Data Connection yet.
#If u want complete changelog go into Settings/Aboutphone/Changelog
The ROM feels a lot smoother.
Enjoy.
Regards
Akash
Click to expand...
Click to collapse
Sony has released new MM blobs that fix the data connectivity issue.
Sent from my XT760
drakonizer said:
Sony has released new MM blobs that fix the data connectivity issue.
Sent from my XT760
Click to expand...
Click to collapse
@drakonizer i just now saw it but as i m using cm source and kernel i need to wait until cm merges those changes.