Phone stuck on boot HTC One x - HTC One X

i followed this and now my phone wont boot past the cyanogenMod screen
Need help guys hopefully one of you can help me with step by step instructions.
The last ROM I installed was 10-20130127-NIGHTLY-endeavour
How do I get to the latest update. I have tried using the check for updates section and downloaded a later version but it fails to install
---End Quote---
First, your phone alone can not update your ROM from january to now, as there are kernel changes (boot.img). Kernel must be flashed from PC, so you might as well download the update from PC.
For the latest RC download THIS (http://get.cm/?device=endeavoru&type=RC). If you want nightly, find it in OP
Copy the zip to sdcard
Open zip and extract boot.img to your PC
For Google stuff, get THIS (http://goo.im/gapps/gapps-jb-20130301-signed.zip)
Copy the zip to sdcard
Do step 2 to 8 from OP:
2. Do a Nandroid backup!
Reboot to Recovery. Backup.
3. WIPE
Format /cache and /system and Advanced - wipe dalvik
4. Install the ROM
Install rom.zip from sdcard
5. Optionally install the Google Addon
install gapps from sdcard
6. Download boot.img as well
(or copy from rom.zip)
7. boot into boot loader (adb reboot bootloader). Use fastboot and ‘fastboot flash boot boot.img’ through usb to have the correct kernel/boot image. Otherwise it won’t work/boot.
Make sure you get confirmation that image is flashed. Fastboot can take some time to work. "fastboot devices" will show your serial if it works.
8. 'fastboot erase cache' is recommended if you have booting issues
Installing the rom failed and was aborted now none of my backups will start either

Are you sure your phone is endeavor and not the XL variant?
Sent from my HTC One X using xda app-developers app

Stefan0vic said:
Are you sure your phone is endeavor and not the XL variant?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
i think its because i have the wrong hboot for the rom my hboot is 0.95

http://forum.xda-developers.com/showthread.php?t=2272706
Sent from my HTC One X using xda app-developers app

Related

[Q] How to fix ROM after forgetting to backup and clear cache and cannot fastboot?

Hi guys,
I have an international HTC ONE X and I was impatient in trying to root and flash custom ROM for the first time.
I followed this instruction sheet:
http://onexroot.com/one-x-root/how-to-root-one-x/
And managed to unlock the bootloader and root device. Saw Super SU
Then, I tried to install CM10 ROM but I did forget to backup and wipe cache and data.
http://onexroot.com/one-x-roms/cm10-official-jelly-bean-rom-for-one-xatt-one-xone-xl-best-rom/
I went into bootloader->recover -> install from sd card -> cm10-official -> yes
Then the CM loading screen went on for like 10+ minutes straight so I thought something was off.
So after doing some panic googling, I installed Android SDK and ever since then, I cannot access fastboot via cmd
I then restarted it to bootloader and then did a backup now (late?)
I then looked up steps I missed and I think what I missed was
1. wipe cache and data
2. backup stock ROM
3 usd cmd -> fastboot -> boot image
Here are the steps I think I need to go about solving it:
1. Fastboot img of cm10 in cmd
2. wipe cache and data
3. Bootloader -> recovery -> install from sd -> cm10 -> yes
It gives me this error message:
fastboot.exe. system error
The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem.
So I google'd up this error message and I found this thread:
http://forum.xda-developers.com/showthread.php?t=781386
I tried the following solutions but I don't quite what to do.
1. Move adb.exe fastboot.exe and adbWinApi.dll to C:/Android
2. Install Daemon tools *(But I don't know what to do after installing it)
3. Uninstalling Android SDK
4. You need to add the directory containing the "AdbWinApi.dll" to Windows' path under Environment Variables, so Windows know where to look for the necessary files when you enter commands in the shell.
Can someone walk me through this? I am in a bit of panic.
my skype: sometingepic
Thanks ahead of time
Try this tool http://forum.xda-developers.com/showthread.php?t=1734365
You need sdk and htc drivers
Flash stock recovery
Look up ruu find how to find wich one you need
Lock bootloader with that tool
Run ruu
Sent from my HTC One X using xda premium
joewong1991 said:
Try this tool http://forum.xda-developers.com/showthread.php?t=1734365
You need sdk and htc drivers
Flash stock recovery
Look up ruu find how to find wich one you need
Lock bootloader with that tool
Run ruu
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Hmm.. I gave the tool a try but it said my device was not connected.
Problem I'm having is that I can wipe cache in recovery but when I first tried to install the ROM from zip, I forgot to backup ROM, fastboot boot image and wipe cache.
Another problem is that I can't mount the sd card or use fastboot USB right now. When I boot into recovery to mount SD card, it shows an error and fastboot doesn't seem to fully connect.
(One X also has no removable SD card)
When I try to mount SD card in recovery, it gives me an error so that means I can't just mount SD card to put stock ROM.
Right now, I'm looking for a way to mount SD card successfully so I can put stock ROM back on the One X. But until I can somehow mount the sd card, I'm in the stress and I'm a little afraid. My car mount for One X just came in and I can't use it.
Thanks in advance.
Telling us what the error is would be useful.
However, because I AM psychic, I can tell you that your version of clockworkmod is not the latest, so get 5.8.4.0, flash it:
fastboot flash recovery cwm-5.8.4.0.img
And then recovery will work for mounting as USB.

[Q] HTC One X Booting Problems

Hi guys,
Need urgent assistance as I'm having a weird problem.
So I installed Viper (latest update) and everything was working fine...added numerous tweaks (statusbar, icons, etc)
Now I installed the latest version of Strobe, jotha's APM mod and SenseCream (in that order) but my phone won't start!
I can access the boot screen but it gets stuck on black screen after the modified boot screen (which worked before I installed these themes too btw)
I can still access recovery and bootloader but I can't start the phone - I'd also appreciate assistance in uninstalling these themes as they seem to be the culprit (if I can get them working, all the better ofcourse)
Any suggestions?
p.s. I have the international HTC One X with 3.14.401.31 (I believe) base
Did you flash the boot.img ?
Try to full wipe again in recovery then flash the boot.img then install the full rom. After installing, boot the phone. DO NOT flash those two add ons right away after the rom.
That also happens to me a while ago.
Hope that helps
Sent from my HTC One X using xda app-developers app
chaun1308 said:
Did you flash the boot.img ?
Click to expand...
Click to collapse
boot.img?
I just flashed the zip folders that I saw here for the themes
flammin_ice1986 said:
Try to full wipe again in recovery then flash the boot.img then install the full rom. After installing, boot the phone. DO NOT flash those two add ons right away after the rom.
That also happens to me a while ago.
Hope that helps
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I'll do the full wipe now...where do I find the boot.img though?
also how do I access usb to copy the full rom into the sdcard? i can't seem to access it
It's in the ROM zip . extract it and flash it through fastboot . fastboot flash boot boot.img .
If you do a full wipe, the full rom (the zip file viper rom) will remain in your virtual sd card.
First, on your computer where you save the downloaded zip file of viper rom, extract it then copy the boot.img you found inside, then place it on your fastboot files.
Next, go into your bootloader by pressing power button and volume down for about 10-15secs
In the bootloader, choose the fastboot by clicking the power botton, navigate using the volume keys.
Then connect your usb. Open a command prompt to your computer then navigate to your fastboot files. After that, flash "fastboot flash boot boot.img"
Then "fastboot erase cache"
Then go to recovery and wipe data, cache and dalvik. Finally, flash the zip file (viper rom)
make a full wipe: data, cache partition, and dalvik,
Sent from my HTC One X using xda app-developers app
flammin_ice1986 said:
If you do a full wipe, the full rom (the zip file viper rom) will remain in your virtual sd card.
First, on your computer where you save the downloaded zip file of viper rom, extract it then copy the boot.img you found inside, then place it on your fastboot files.
Next, go into your bootloader by pressing power button and volume down for about 10-15secs
In the bootloader, choose the fastboot by clicking the power botton, navigate using the volume keys.
Then connect your usb. Open a command prompt to your computer then navigate to your fastboot files. After that, flash "fastboot flash boot boot.img"
Then "fastboot erase cache"
Then go to recovery and wipe data, cache and dalvik. Finally, flash the zip file (viper rom)
make a full wipe: data, cache partition, and dalvik,
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
ok so I'm halfway there but still having a few problems
via fastboot I flashed boot.img and then erase cache
I still don't see the full viper rom in my sdcard though so I can't reach the next part
p.s. I'm trying not to wipe all the data as I didn't get a chance to back up...if I need to though then I'll just have to do it
kooltilldend said:
ok so I'm halfway there but still having a few problems
via fastboot I flashed boot.img and then erase cache
I still don't see the full viper rom in my sdcard though so I can't reach the next part
p.s. I'm trying not to wipe all the data as I didn't get a chance to back up...if I need to though then I'll just have to do it
Click to expand...
Click to collapse
where did you place the rom when you copied it from your computer? It should still be there unless you deleted it.
Sent from my HTC One X using xda app-developers app
flammin_ice1986 said:
where did you place the rom when you copied it from your computer? It should still be there unless you deleted it.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I probably deleted it as I installed the viper rom a long time ago...I have a copy on my laptop but I doubt I have one in the sdcard as well
Is there any way to transfer it from my laptop to the sdcard? perhaps via fastboot?
Oke, mount the sdcard in the recovery as a usb mass storage and copy the rom.zip from sdcard\O\ back to sdcard\
Then just reflash the rom.zip with only a dalvik cache and cache wipe.....always do a nandroid backup before flashing themes or mods
And after flashing a mod or theme you don't have to flash the boot.img if it goes wrong ....only the rom.zip. the theme probably broke the framework of the rom so it fails to boot properly
kooltilldend said:
I probably deleted it as I installed the viper rom a long time ago...I have a copy on my laptop but I doubt I have one in the sdcard as well
Is there any way to transfer it from my laptop to the sdcard? perhaps via fastboot?
Click to expand...
Click to collapse
Ok so i got confused. I thought that you just recently installed the viper rom and not so long ago. The latest jellybean version is 3.3.2, which is what im using right now.
I've never tried flashing a full rom using fastboot command so i think a more experienced user could answer your question.
Try to access mount/storage from your recovery if you could possibly transfer data from your laptop.:thumbup:
Sent from my HTC One X using xda app-developers app
Mr Hofs said:
Oke, mount the sdcard in the recovery as a usb mass storage and copy the rom.zip from sdcard\O\ back to sdcard\
Then just reflash the rom.zip with only a dalvik cache and cache wipe.....always do a nandroid backup before flashing themes or mods
And after flashing a mod or theme you don't have to flash the boot.img if it goes wrong ....only the rom.zip. the theme probably broke the framework of the rom so it fails to boot properly
Click to expand...
Click to collapse
I tried to mount USB storage via CWM but it keeps giving me error: Unable to open ums lumfile (no such file or folder)
and you are right...I'm 100% certain the theme broke the rom framework...but I can't think of a solution
Mount the freakin sdcard inside the recovery as a usb mass storage and copy the rom.zip over !
kooltilldend said:
I tried to mount USB storage via CWM but it keeps giving me error: Unable to open ums lumfile (no such file or folder)
and you are right...I'm 100% certain the theme broke the rom framework...but I can't think of a solution
Click to expand...
Click to collapse
Your CWM is outdated. Flash this one: link.
Flash like this: "fastboot flash recovery filename.img" and "fastboot erase cache"
flammin_ice1986 said:
Ok so i got confused. I thought that you just recently installed the viper rom and not so long ago. The latest jellybean version is 3.3.2, which is what im using right now.
I've never tried flashing a full rom using fastboot command so i think a more experienced user could answer your question.
Try to access mount/storage from your recovery if you could possibly transfer data from your laptop.:thumbup:
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I have the latest viper rom as well (updated via OTA)
Also I'm not trying to flash the rom via fastboot (doubt its possible)...but I do need a way to copy the rom to my sdcard somehow...I have no idea how though
mount/storage isn't working I'm afraid
Yes there is no other option the framework changed for the last viper update so I think the theme is not updated yet with the proper framework
Flash this recovery , you are on a old cwm recovery
http://db.tt/Krlm4dPs
So flash the recovery, mount as mass storage and copy the rom zip, install the rom.zip and choose wipe dalvik cache and cache only !!! Then boot the phone. Then use es file explorer and set it with root functions in the settings of es file explorer ....then navigate to system/data and delete the theme.apk files you want to delete, reboot again and its gone
TToivanen said:
Your CWM is outdated. Flash this one: link.
Flash like this: "fastboot flash recovery filename.img" and "fastboot erase cache"
Click to expand...
Click to collapse
dude!!! I freaking love you!! haha
seriously thanks mate! I can mount USB now...so I'll copy over the viper rom and re-install the whole thing (without wiping data hopefully)
cheers!!
ok so I have finally managed to install viper rom (now doing system updates as the copy on my laptop is an old one)
so far I can't figure out how to remove the 2 themes I flashed on the phone though...strobe I "think" I found via system folder but I have no idea where the other 2 items are (SenseCream and apm mod) - any clues?
Quite a few of my apps are crashing at boot as well but I imagine this should be resolved once I've completed all the system updates
Appreciate everyone who's helped so far...thanks!!
Let us know if its all okey after all ! So either TT or me can close the thread properly
Whops. I should learn to read.

[Q] help flashing MIUI, my first rom flash

hi
i already unlock the bootloader, install custom recovery TWRP, and done a backup
i also copy my backup to PC
now i'm confuse
- i need to root the phone or can i just flash the new room?
- if i need to root the phone i found an italian guide on 4.0 and attach file, can i use that? i have 4.1.1 on mine now
i'm not interested to have HTC stock with root but what i want is to install MIUI ROM
this is the only guide i found in english that explains how to install the rom
external link (i can't post it) miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
what i understand is:
- boot my device power + menu down, to see the FASTBOOT USB i have to select FASTBOOT
- flash the boot.img
- press the power button once (HBOOT i guess), click volume down, highlight recovery & press power
- Flash the downloaded ROM via recovery normally and it followup at this link
external link (i can't post it) miuiandroid.com/community/threads/how-to-update-upgrade-miui.15424/
i need to copy the img rom in SD ROOT before starting with all this process
- now i need to Wipe data/factory reset, Cache Wipe & Dalvik Cache Wipe in all tutorial i found this is done with clockworkmod
in TWRP under menu WIPE i guess are System, Cache, Dalvik buttons
after that i'm note sure if i need to flash italian language, if i don't need and i can just download it later i tihink is not a big deal
unless is all in chinese
is the metod correct?
do i have to copy ROM file in .zip format as i download?
here where i found ROM
from official site grey button miui.com/download-7.html
OR
from UK web site miuiandroid.com/community/threads/3-4-28.20232/
the boot.img is here
point 3 miuiandroid.com/community/threads/installing-the-htc-one-x-required-s-on-steps.16592/
i'm not sure if would be better to use clockworkmod, since most tutorials use that..
thanks
Doesn't matter which recovery you use. Yes just place the zip file on your sd card. Flash boot.img as you already said. Perform a full wipe and then flash the Rom zip. Reboot and its done.
The Roms are pre-rooted so you dont need to worry about that. Italian language should be included i guess.
Sent from my HTC One X using xda app-developers app
Heres what i do :
1) Put Rom.zip on SD card
2) Put boot.img in fastboot folder
3) fastboot erase cache
4) fastboot flash boot boot.img
5) fastboot erase cache
6) Reboot into recovery
7) Full wipe (except sd card)
8) Install rom
9) Enjoy new rom
Andy
i did my first mess but fortunally i could restore since i had copy the backup on my mac too
i don't know what went wrong but this is what happened:
- i did how was told before, but actually i download boot.img and rom from 2 different sites
- after reboot it didn't move from first screena waited for 15 minutes almost, so i did reboot in recovery tri to wipe but nothing happened
- so i decide to restore... but it did boot even if it was successful
- i thought that if i flashed the boot.img first time i may need to do it again, i found boot.emmc.win, rename it to boot.img, flash it and then i restored successfully
:victory:
now, to try a different rom i need to restore (maybe is safer)? can i copy the rom from recovery or fastboot?
what can it be wrong with my miui rom? could it be boot.img and rom file mismatch? can't find where to download both
al404 said:
i did my first mess but fortunally i could restore since i had copy the backup on my mac too
i don't know what went wrong but this is what happened:
- i did how was told before, but actually i download boot.img and rom from 2 different sites
- after reboot it didn't move from first screena waited for 15 minutes almost, so i did reboot in recovery tri to wipe but nothing happened
- so i decide to restore... but it did boot even if it was successful
- i thought that if i flashed the boot.img first time i may need to do it again, i found boot.emmc.win, rename it to boot.img, flash it and then i restored successfully
:victory:
now, to try a different rom i need to restore (maybe is safer)? can i copy the rom from recovery or fastboot?
what can it be wrong with my miui rom? could it be boot.img and rom file mismatch? can't find where to download both
Click to expand...
Click to collapse
extract the boot image from the rom you are going to use
ok, i tryed again but now it get stack on Mi black screen
i waited 8 minutes but nothing happens, i also tried to wipe cache and davik, nothing happens
at list i get to black Mi screen
do i need to delete the boot.img from ROM zip?
what could it be?
1st u didn't mention which phone u r using
2nd dn't get confuse while downloading rom n .img file
Type in google
(Ur phone model) android development xda
U'll find all the stuffs related to ur phone
So try this 1 n remember before updating or rooting or anythg related to ur which can mess ur phone or can brick ur phone
I suggest u read twice the thread n procedures n also check thrice the stuff which u gonna need to perform ur act.
Sent from my GT-N7100 using xda premium
al404 said:
ok, i tryed again but now it get stack on Mi black screen
i waited 8 minutes but nothing happens, i also tried to wipe cache and davik, nothing happens
at list i get to black Mi screen
do i need to delete the boot.img from ROM zip?
what could it be?
Click to expand...
Click to collapse
i would try a different rom for now, viperx perhaps. and the boot image is in the rom zip, extract the boot img from the rom and put it in your fastboot folder then copy the rom to your sdcard. once you have done that, fastboot erase cache, flash the boot image, fastboot erase cache again, then back into recovery, wipe cache and dalvik just to be sure then use recovery to flash the rom and hey presto. all of the above is assuming you have the one x international tegra 3
I have htc one x european terga 3, as far as I know mini is only for tegra 3
what you describe is exactly what I did:
- I leave the rom zip ad it is, I didn't remove boot.imf that I extract, correct?
- when I flash I hit hoot fastboot, connect USB and fastboot change in fastboot USB, to go back I select Hboot and and hit power, prom there recovery
- I did unlock bootloader but did not get rooted my phone, could it be that?
al404 said:
I have htc one x european terga 3, as far as I know mini is only for tegra 3
what you describe is exactly what I did:
- I leave the rom zip ad it is, I didn't remove boot.imf that I extract, correct?
- when I flash I hit hoot fastboot, connect USB and fastboot change in fastboot USB, to go back I select Hboot and and hit power, prom there recovery
- I did unlock bootloader but did not get rooted my phone, could it be that?
Click to expand...
Click to collapse
read this post. at least twice!! http://forum.xda-developers.com/showthread.php?t=2069904 do not do the "unlock bootloader" section as you already did that
@nogotaclue sorry i read so many, and some of them sayed that root was not necessary if you flash a new rom, other sayed it could still be necessary... now i rooted with the app and did a new backup that i'm coping on PC
reading further it says: to wipe, install rom, and flash boot.img after
"Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it."
al404 said:
@nogotaclue sorry i read so many, and some of them sayed that root was not necessary if you flash a new rom, other sayed it could still be necessary... now i rooted with the app and did a new backup that i'm coping on PC
reading further it says: to wipe, install rom, and flash boot.img after
"Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it."
Click to expand...
Click to collapse
yes you can do it that way, i usually flash first but sometimes it does not work, so just flash it last as it says in the tutorial
after root, with the same steps, the ROM starts... but
touch screen is not working :crying:
now i'm gonna look arond to see if i found some post about that
this (kernel patch) solved my last issue
http://miuiandroid.com/community/threads/hox-miui-v5-official-release.20215/page-2
al404 said:
this (kernel patch) solved my last issue
http://miuiandroid.com/community/threads/hox-miui-v5-official-release.20215/page-2
Click to expand...
Click to collapse
So everything working now ?
Sent from my underpants using Daz and Lenor summertime
YES :good: without that path touchscreen wasn't working :victory:
hope is not going to mess all up with first update

[Q] Prolem updating to CM 10.2.0

Hi all!
So, I have an HTC One X as my primary phone, and when I tried to update it to CM 10.2.0 using the CM update (inside settings, I was on 10.1.2 I think) I got an infinite launch screen (the one with the rolling blue arrow).
I restarted the phone, and it did the same, so I started the phone on recovery mode (I have the Team Win Recovery v2.6.0.0), mounted the device, copied everything I need from the SD card, swiped everything, and tried a fresh install of CM 10.2.0.
So based on this topic (http://forum.xda-developers.com/showthread.php?t=2490492) I copied the cm-10.2.0-endeavoru.zip, gapps-jb-20130813-signed.zip, recovery-clockwork-touch-5.8.4.0-endeavoru.img and a SuperSU.zip (I had this file from the first time I installed the CM) into my SD, an started to follow the following steps:
1 Read the official wiki :good:
2 Unlock your device via http://www.htcdev.com :good:
3 Flash the latest official ClockworkMod-Recovery via Fastboot - not sure but I think I did it when I installed the CM on the first time
4 Copy GApps and CM10.2 ZIPs to your SDCard :good:
5 Boot into Recovery :good:
6 Flash CM10.2 zip from SDCard :good:
7 Flash GApps zip from SDCard :good:
8 Flash the boot.img included in the CM10.2 zip via Fastboot - don't know exactly what do this mean... I tried to install the img file but my recovery app don't let me install .img files I think...
9 DO A DATA WIPE / FACTORY RESET :good:
10 Reboot :good:
11 Don't restore system data using Titanium Backup! :good:
12 Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! :good:
So I think my problem is either on the step 3 or 8... The result, after install everything and wipe (ignoring the step 3 and 8) is the same infinite CM loading screen :silly:
Can you please help me? I don't have any phone now
Thanks a lot.
When it tells you to flash boot.img..You must go Fastbood Mode.. (Power button and Volumen down) Then choose Fastboot..
Then in cmd navigate to folder where Fastboot files are downloaded example:
cd C:\Users\Name\Fastboot\
And then use this
Fastboot flash boot boot.img
Fastboot erase cache
Sent from my HTC One X using Tapatalk 2
big noob said:
When it tells you to flash boot.img..You must go Fastbood Mode.. (Power button and Volumen down) Then choose Fastboot..
Then in cmd navigate to folder where Fastboot files are downloaded example:
cd C:\Users\Name\Fastboot\
And then use this
Fastboot flash boot boot.img
Fastboot erase cache
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Oh, so I need to do that on my computer... Totally make sense, and thats why the only version I can install is the 10.1.2, because that was the one I did properly, flashing the boot (a log time ago) and now a days thats the only version I can install with no problem... I've installed the 10.1.2 again (I needed the phone to work) but I will try again today to flash it and see what happens.
Thanks big noob (that should be my name)

HTC One X Bricked.. Help Needed

First of all, I want to tell that I am a beginner and do not know much about rooting and custom ROM installation.
Few days back, I became very keen to know what is custom ROM and is there any custom ROM available for my HTC One X. I searched through internet and found one, downloaded it. Rooted my phone, Unlocked bootloader. After that I installed CWM touch recovery. Everything was going great. Then, I first flashed the kernel given along with that custom ROM. it Flashed. Then, I flashed that Custom ROM. I Showed an error. I flashed it twice or thrice but it stucked on that error. Also in a Hurry, or Excitement, I forgot to take a backup of my previous ROM. After that, I switched on my phone it does nothing and stucked at HTC Bootscreen. I factory reset my phone, it wiped all data from phone. I Thought, a RUU would work, but it also doesn't worked.
I went to HTC Service Center, they are saying that motherboard will be replaced, which is almost of same cost of phone. I cannot spend so much.
I tried so many ways, but nothing worked.
So, I am Finally here seeking help from Experts. Any help will be highly appreciable.
Sorry for my bad English.
Details :
HBoot: 1.73
S-ON
Endevouru
Try this, flash this recovery :
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Make a full wipe and install the rom.zip. and flash the boot.img from the rom.zip
What rom were you trying to flash ?
If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..
a.broken.star said:
If its a kitkat ROM you can't use cwm recovery to flash that rom.. you either use philz recovery given by mr hofs or latest twrp recovery from the twrp thread or indexed listing thread..
Click to expand...
Click to collapse
You mean this one
https://www.dropbox.com/s/14c1ikgsp38axwv/twrp-recovery2.img
Righto...:thumbup:
i was trying to flash MaximusHD rom.
and Philz recovery i have tried already. The problem is I do not have access to storage. All i have is Bootloader access. and nothing on my phone
Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom
Mr Hofs said:
Charge the battery, unlock the bootloader, flash the custom recovery and install a new rom
Click to expand...
Click to collapse
i have tried this too.. no ROM is being flashed. everytime it ends with some error(s)
What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !
Mr Hofs said:
What error ??? Be more specific otherwise we cant get 1 step ahead
1: Is your bootloader unlocked ?
2: flashes the custom recovery ?
3: what rom ?
4: did you also flashed the boot.img ?
Please answer specifically !
Click to expand...
Click to collapse
1. Bootloader was unlocked, i have relocked it. I'll unlock it. no Issues.
2. I have tried CWM philz touch custom recovery. I'll install it again
3. It do not have any ROM at present. Earlier it had 4.2.2 JB Stock ROM
4. Yes, I flashed boot.img. Nothing worked
1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app
HD2Bastler said:
1. Unlock the bootloader again
2. Flash the Philz-Recovery
3. Boot the Recovery
4. Install the Rom via ADB-Sideload
5. Reboot to bootloader
6. Flash the Kernel (boot.img)
7. Reboot into system
If you get an error, then post the Code here , so we can find out what's wrong with your phone.
Sent from my HTC One using XDA mobile app
Click to expand...
Click to collapse
sorry for this stupid question. But how to use ADB Sideload..??
Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !
Mr Hofs said:
Just mount the sdcard in the mounts and storage menu ! No need for adb sideload
And don't just install the rom, you must perform a full wipe before that !
Factory reset
Wipe cache partition
Wipe dalvik cache
Format system
Format data
Format cache
Then install the rom !
Click to expand...
Click to collapse
ok i will try this and will be back with whatevr result comes out....
I bricked mine too , this is what I did
mohitsinghl said:
ok i will try this and will be back with whatevr result comes out....
Click to expand...
Click to collapse
If that doesn't work try this , this is what I did when I bricked my HTC One X:
1. Download Fastboot
2. Download adb
3. Download cm-10.2.1-endeavoru.zip (https://download.cyanogenmod.org/?device=endeavoru)
(I used this one , it's justs so you get your SD Card Working again and you can
put ROMS and everything on it again)
4. Download openrecovery-twrp-2.4.0.0-endeavoru-JB (http://techerrata.com/browse/twrp2/endeavoru)
(This one will be used because it has touch ability's and you can install ROMS with it )
4.1 Or you can download recovery-clockwork-touch-6.0.4.7-endeavoru.img (a.k.a Philz recovery)
(This one will be used because it has touch ability's and you can install ROMS with it )
( I used Philz recovery 5.15.9.img (provided by Mr Hofs -> who is a great guy btw)
5. Download openrecovery-twrp-endeavoru-2.1.7 (http://techerrata.com/browse/twrp2/endeavoru
(This one will be used for adb push commands, openrecovery-twrp-endeavoru-2.1.7 has a built
in ability for your sd-Card , adb can recoginze it but the problem is your touch will not work.)
6. Go into bootloader -> fastboot and do this:
6.1 fastboot flash recovery openrecovery-twrp-endeavoru-2.1.7.img
7. Go into recovery (Hboot -> recovery)
7.1 just open the recovery, your touch will probably not work. DONT LOCK IT JUST LEAVE IT OPEN
(ADB sideload didn't work for me so that's why we are going to do this)
IF YOUR TOUCH WORKS YOU CAN SKIP STEP 8
7.2 do this command: adb devices
If you don't find your devices in this then the next steps will not work.
YOU HAVE TO SEE YOUR DEVICE
7.3 do this command: adb push cm-10.2.1-endeavoru.zip /sdcard/
You can only do cm-10.2.1-endeavoru.zip if the zip file is located in the same folder your using
with command. I'm not sure about /sdcard/ . I cant remember anymore But this will put the
but this will put the zip Directly on your SDcard.
8. Go to bootloader -> fastboot
8.1 do this command: fastboot flash recovery openrecovery-twrp-2.4.0.0-endeavoru-JB.img
8.2 or do this command: fastboot flash recovery Philz recovery 5.15.9.img
Your touch wasn't working but it will work now.
9. Go to booloader -> fastboot
9.1 extract the boot.img from the Download cm-10.2.1-endeavoru.zip into the fastboot folder
9.2 do this command fastboot flash boot boot.img
9.3 fastboot erase cache
10. Go back to recovery
10.1 Wipe User Data
10.2 Wipe data cache
10.3 Go to advanced -> wipe Dalvik Cache
11. Install zip from sdcard
11.1 Choose cm-10.2.1-endeavoru.img
11.2 Install the zip WITH full wipe
12. After the install, reboot. You should have a full functional HTC ONE X now
13. Now but your ROM's(ZIP FILES)/Recovery(ZIP FILES)/Kernels and everything you want on your HTC because
You can see your HTC on your PC again!
I tried adb push.. But i cant find the pushed zip on sd card in recovery.. Moreover i tried flashing using fastboot command i.e. fastboot flash zip rom.zip it ended with an error <remote not allowed>
Sent from my Titanium S5 using XDA Free mobile app
For maximus hd do this :
Flash Philz 5.15 and mount the sdcard and wait literally minutes to let the sdcard pop up, copy the rom, do a full wipe and install it then also flash the boot.img from the maximus rom in the bootloader and reboot the phone
Don't make this so hard on yourself !
Philz 5.15 recovery is not flashed. And ended with an error 0xa . any other way??
Sent from my Titanium S5 using XDA Free mobile app
Uhm really.....second time : post the error/your taken steps ! I'm not playing a game of sharades here ......
If it's not flashed you are doing something wrong
Please don't get angry on me.. M a beginner.
Okey now i have managed to flash philz recovery version 6 i.e. philz touch 6 but still cant get storage popup on my pc. I waited 30 mins after clicking mount /storage/sdcard0
Sent from my Titanium S5 using XDA Free mobile app

Categories

Resources