Develop Bugs

Killed or bricked my Phone

Was using Odin , got stuck forever. The phone won't do anything now, won't reboot normally won't boot into recovery , won't boot into download mode. Totally non reponsive , nothing ever on screen , no charging icon . Battery out then back in , plugged into usb then put in battery.. tried it all.
looking for suggestions, phone is going back to t-mobile if I cant fix this

Try entering download mode again and reflash your phone. Download the tar again in case the previous was corrupt.
Pull out the battery and put it back in. hold vol up and down at the same time and then connect the USB cable. This will get you back into download mode.
Good luck!
Also, I believe this is in the wrong forum. I'm not a mod but I believe it belongs in the general section.
Sent from my SGH-T989 using xda premium

I have tried for an hour straight to enter DL mode , no soap

ransome7 said:
I have tried for an hour straight to enter DL mode , no soap
Click to expand...
Click to collapse
It's a common misconception (I did it myself) that the power button is also used in the sequence to enter download mode, this isn't the case. Just hold down vol up & down and connect the usb cable, do not press the power button.
Just trying to rule everything out
If this doesn't work for you then I'm out of ideas. Are you still able to get into recovery? If you are, try flashing a ROM and see what happens.
Just to clarify, what does your phone do when you turn it on? Does it boot loop or get stuck somewhere?
EDIT:NVM reread original post (selfn00b'd myself). Totally unresponsive? I believe you should still be able to get into d/l mode since I think they set that up as failsafe. If you can't then it probably will have to go back. Bummer

I'v herd that it somtimes helps to take the battery out and let it sit for 30 min
But thankfully I can not confirm!
May also want to try different computer and cable

Try ADB
Sent from my SGH-T989 using xda premium

quest4fire said:
Try ADB
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Can You ADB if your phone won't power up?

You need your PC to recognize it. Is it seeing your phone or is it completely dead?
Sent from my SGH-T989 using xda premium

DOWNLOAD MODE
power off phone
pull out battery
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode
make sure u have the proper samsung drivers

movieaddict said:
DOWNLOAD MODE
power off phone
pull out battery
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode
make sure u have the proper samsung drivers
Click to expand...
Click to collapse
You did not read the OP , The phone died after using Odin(which DL mode is required) , obviously the phone is easy to get into DL mode. The phone is stone dead and won't power into anything

its funny when people suggest you try something to power on your phone even after youve just told them you have tried it all. kind of annoying actually.
but same thing happen to me man. i finally gave up and sent it to samsung today, that would probably be your best option. either that or tmobile

k2worldwweapon said:
its funny when people suggest you try something to power on your phone even after youve just told them you have tried it all. kind of annoying actually.
but same thing happen to me man. i finally gave up and sent it to samsung today, that would probably be your best option. either that or tmobile
Click to expand...
Click to collapse
Thats what I ended up doing , they are sending out a new phone. It is disturbing that you can actually KILL your phone using Odin. I have flashed a ton of phones a million times and never ended up with a door stop.

Im surprised the GS2 is brickable. I came from a Vibrant (Galaxy S) and that phone was impossible to brick. I was always able to bring it back to download mode but sometimes i had to try different combinations of things to get it into DL mode like remove sim or battery etc. What I'm saying is your phone can be fussy.
Sent from my SGH-T989 using xda premium

I bricked mine flashing a boot.img to the wrong partition in recovery. This phone is very brickable. T-Mobile gave me a new one but the first thing they asked me was if I rooted it. I said what's that mean
Sent from my Nexus S using Tapatalk

My brother, myself, and my fiancee all got s2's. Day of, I odin'd recovery to both mine and my brother's and rooted with no problem. tried it on my fiance's, dead in the water. did the same exact thing to all 3, didn't change any procedures. If you keep trying to turn it on, sometimes the led flashlight from the camera will flash for a second, other times it actually turns on and continues to work as normal but once you turn it off again, it may not turn on again. i got it to turn on again and actually odin'd back to stock recovery. problem was NOT fixed even after this, and after i turned it off again, it turned on again once, but never again after that. filed for warranty exchange. i used to think as long as you can odin back to stock you're fine, but it clearly wasn't the case. looks like we just got unlucky. if you bought the phone from a corporate tmobile store, bring your receipt and trade it in at the store because they give you a new phone. if you do a warranty exchange, they send you a refurbished phone (although the s2 is new enough that they might send you a new one anyway if you're lucky).

Galaxy S3 Won't Power On

Hi , I'm having problems with my Galaxy T999. I have rooted and have not yet installed any kernels/roms. The only thing i did was installed a couple apps from the play store . and wanted to check out the CWM recovery menu and was going to try to installed "hyperX camera mod". First thing i did was shut off the phone . Then pressed on the Volume up+Home+Power button . After doing that my phone didn't turn on or anything , no vibration or anything . I hooked it on with my computer and press the power button and it was able to connect and then disconnected. I am at lost now and can't seem to find any answer . Have looked every where not sure what to do now. Any solution will be much appreciated .
***
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Without any solutions I'll probably gonna get my phone replace . T_T

Does your phone disconnect immediately, or does it stay connected for a brief amount of time? If it stays connected briefly, try using adb during this period to boot into recovery. The command is "adb reboot recovery" (without the quotes).

kengvang25 said:
Hi , I'm having problems with my Galaxy T999. I have rooted and have not yet installed any kernels/roms. The only thing i did was installed a couple apps from the play store . and wanted to check out the CWM recovery menu and was going to try to installed "hyperX camera mod". First thing i did was shut off the phone . Then pressed on the Volume up+Home+Power button . After doing that my phone didn't turn on or anything , no vibration or anything . I hooked it on with my computer and press the power button and it was able to connect and then disconnected. I am at lost now and can't seem to find any answer . Have looked every where not sure what to do now. Any solution will be much appreciated .
***
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Without any solutions I'll probably gonna get my phone replace . T_T
Click to expand...
Click to collapse
Try to remove your battery then plug in charger. See if you can turn on. If you can turn it on, leave it 30 minutes. Then put in the battery.

By the looks of the result the computer gives you when you plug it in, seems it is hard bricked! Are you sure you didn't flash anything from the I9300 section like a rom?
Sent from my SGH-T999

The hyper x camera mod isnt entirely for our phone. I've read that it's flashable to our phone though, so I'm not sure what's going on here. Maybe the OP needs to link where he got the mod. Ih and stay away from the intl version all together.
Sent from my SGH-T999 using xda premium

mt3g said:
The hyper x camera mod isnt entirely for our phone. I've read that it's flashable to our phone though, so I'm not sure what's going on here. Maybe the OP needs to link where he got the mod. Ih and stay away from the intl version all together.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yup its a paperweight. The Intl version has the system partition in a different place. So you borked an important one.

Only thing that's throwing me off is that the OP suggests he didn't actually get around to flashing the mod.
Sent from my SGH-T999 using xda app-developers app

kengvang25 said:
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Click to expand...
Click to collapse
That's a good sign! Looks like you're able to enter Download mode. Download Odin and flash a stock ROM.

vinvam said:
That's a good sign! Looks like you're able to enter Download mode. Download Odin and flash a stock ROM.
Click to expand...
Click to collapse
No that's a sign of hard bricked. Check other threads asking for help. They all have that displaying after they connect it to a pc
Sent from my SGH-T999

chrisram88 said:
No that's a sign of hard bricked. Check other threads asking for help. They all have that displaying after they connect it to a pc
Sent from my SGH-T999
Click to expand...
Click to collapse
Oops, never mind! chrisram88 is correct. :good:

I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
vinvam said:
Oops, never mind! chrisram88 is correct. :good:
Click to expand...
Click to collapse

Vadim89 said:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
Click to expand...
Click to collapse
Jtag fix... Costs you around 60! http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999

Vadim89 said:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
Click to expand...
Click to collapse
I just sent my bricked S2 in to http://www.cell-dr.com/
I talked to Randy over there and he was very helpful. Shoot him an email.

Thanks guys for all the great response . I'm not really good with tech stuff so I just got it replace with a new one instead .
And this is the tut that i followed how to root my Galaxy S3 T-999 :
galaxy s 3root .com

What if I install a ROM for I9300 section? is there a solution?

Yup send it in for a jtag repair like linked a few posts up.
Sent from my SGH-T999L using xda premium

SGS3 T999v wont start up.
My sgs3 t999v would turn off by itself every other time I hit the lock button.
like I would be txting and then if I hit the lock button it would turn off.
So I though a factory reset would fix the problem. (volume up + home).
after the reset it still kept turning off randomly.
and now I cant even get it to the normal interface. or get in to the manual reset mode.
Device was previously jail broken, however was returned back to stock and was working fine for 3 months.
I had my otterbox on for every fall my phone had, so I dont think it would be a hardware issue.
the phone was running 4.1.1 I believe.
stock rom.
help please! :C

ekimera said:
My sgs3 t999v would turn off by itself every other time I hit the lock button.
like I would be txting and then if I hit the lock button it would turn off.
So I though a factory reset would fix the problem. (volume up + home).
after the reset it still kept turning off randomly.
and now I cant even get it to the normal interface. or get in to the manual reset mode.
Device was previously jail broken, however was returned back to stock and was working fine for 3 months.
I had my otterbox on for every fall my phone had, so I dont think it would be a hardware issue.
the phone was running 4.1.1 I believe.
stock rom.
help please! :C
Click to expand...
Click to collapse
Can you get download mode? (Volume down, HOME and power)
Even though you have a case on it, it sounds like it was probably damaged by one of the falls. Most cases as far as I'm aware mostly protect the display. The shock from impact can still damage internal components, even with a case built with this in mind.
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
Can you get download mode? (Volume down, HOME and power)
Even though you have a case on it, it sounds like it was probably damaged by one of the falls. Most cases as far as I'm aware mostly protect the display. The shock from impact can still damage internal components, even with a case built with this in mind.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Hey thanks for replying!
I drained the battery and got a new charge in it and managed to get it booted up
however now the problem of the lock button is still here.
like if i use it to lock my screen it just turns off on me, and it takes multiple times for me to get the phone up and running again.

you could see if you could find a widget or widgets that will basically put a button on your screen that can power off, enable lock screen, reboot recovery/download, etc.
Then just use the HOME button to turn the screen back on.
It sounds to me like a hardware problem, but if you can flash another Rom and do a full wipe/factory reset you'll know for sure.
I hope this helps. Not sure what else you can do besides getting it repaired or replaced unfortunately.
Maybe someone else will have a better idea though.
Sent from my SGH-T999L using xda premium

[q] at&t s3 dead

I was rooted with CM10.1.0 and was casually using the phone until it randomly turned off. I turned it back on and the only thing that happened was the "Galaxy SIII" screen flashed and turned off again. I popped out the battery multiple times to be welcomed with the same problem again. I can't boot into Download or Recovery at all. Anyone know how to fix this? (btw im on AT&T SGH-i747)

Try another battery.
Sent from my SAMSUNG-SGH-I747

Sorry my friend!!!
Your mobile phone very very bad dead. Have to repair boot with Riff box...and Not your work
Sent from my GT-I9300 using xda premium

gholizadeh666 said:
Sorry my friend!!!
Your mobile phone very very bad dead. Have to repair boot with Riff box...and Not your work
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Please don't provide false or miss leading information.
To OP. Fully charge your battery or use another one if its corrupt.
Try booting up into both recovery or download mode using the proper combination.
Use this guide to get your phone fully working again.
http://forum.xda-developers.com/showthread.php?p=42996302
In some instance (very rare) your phones hardware can malfunction, but seeing how it still boots up I doubt its that's.
Follow my guide and you should be fine.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Mr jayrokk
Mobile phone cant into download mode or recovery!!!
Sent from my GT-I9300 using xda premium

Not without a charged battery. That's why replacing it was the first suggestion.

gholizadeh666 said:
Mr jayrokk
Mobile phone cant into download mode or recovery!!!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
But it boots up.
As long as a phone is able to boot up its fine.
Like I said please do a little more reading and research and don't spread false information.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

What about with it plugged into the charger and try to get to download mode. I thought I bricked my s2, took the battery out but it stayed on. Thought it was possesd bit it was plugged in to USB.

Can't hurt to try.

Definitely recommend download mode with cable plugged in to computer. Are you sure recovery doesn't work while plugged in to power?
Sent from my SGH-I747 using Tapatalk 4 Beta

Carsus55 said:
Definitely recommend download mode with cable plugged in to computer. Are you sure recovery doesn't work while plugged in to power?
Sent from my SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yep. It just loops on the splash screen. I'll try charging it to full and repeating your solutions. (It died off at 80%, very strange). Thanks for your replies though!

Ok guys, seems that my issue isnt the phone being bricked. I left the battery out all night and popped it in the next morning. CM loaded just fine. However after about 10 seconds of it loading, the power menu flashed, i clicked cancel, and then it immediately shut down again, and the usual problem continued. Any thoughts? (btw the phone died at 80% battery the first shut down it had, right now it should have been nearly 100% after charging) Also, connecting it via USB doesn't help at all. Sometimes the blue recovery words flash when i try to boot into recovery, but nothing happens after that.

r8revealed said:
Ok guys, seems that my issue isnt the phone being bricked. I left the battery out all night and popped it in the next morning. CM loaded just fine. However after about 10 seconds of it loading, the power menu flashed, i clicked cancel, and then it immediately shut down again, and the usual problem continued. Any thoughts? (btw the phone died at 80% battery the first shut down it had, right now it should have been nearly 100% after charging) Also, connecting it via USB doesn't help at all. Sometimes the blue recovery words flash when i try to boot into recovery, but nothing happens after that.
Click to expand...
Click to collapse
It could be a bad battery. Might also be the battery contact points. Worse case is something is wrong with power channels on the Mobo. If it is the last then you will have to warranty the phone if you're still covered. I would borrow a battery first to rule out whether or not it is the battery itself.
Sent from my SAMSUNG-SGH-I747

Also make sure the power button isn't stuck!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

jayRokk said:
Also make sure the power button isn't stuck!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
The power button seems to operate normally, but that could also be one of the things that are causing problems. Once i find someone nearby with an S3 battery i'll see if it's actually a battery problem (most likely the case).

I'd thought i'd mention this as well, whenever i pop in the battery, the phone vibrates and tries to turn on, but doesnt actually do it. Anyone have any ideas what could be causing this? power button maybe, but battery?

If the battery out all night boots past the splash screen maybe you could, if you haven't, leaving it out and first thing try download mode. I've been in bad spots but this pretty crappy. Probably to technical for me but Good luck. Let us know how you do if none of the posts help.

Found the problem. The power button is always acting as if it's being pushed down when it actually isnt. The phone starts up perfectly when i hold the phone horizontally with the power button facing down. then when i put it back into portrait mode, the power menu flashes, and its turns off. any knowledge on how to fix this then?

r8revealed said:
Found the problem. The power button is always acting as if it's being pushed down when it actually isnt. The phone starts up perfectly when i hold the phone horizontally with the power button facing down. then when i put it back into portrait mode, the power menu flashes, and its turns off. any knowledge on how to fix this then?
Click to expand...
Click to collapse
Nice!!!
Um I'd say taking apart the phone or mailing back for warranty even try taking it to an att store.. Its hardware and not software so they should replace it
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

r8revealed said:
Found the problem. The power button is always acting as if it's being pushed down when it actually isnt. The phone starts up perfectly when i hold the phone horizontally with the power button facing down. then when i put it back into portrait mode, the power menu flashes, and its turns off. any knowledge on how to fix this then?
Click to expand...
Click to collapse
Warranty it. Mess witht power button some more. Sometimes it will get unstuck.

[Q] just want to confirm if this is hard bricked

So I bought 2 sgh-t989 at the same time... one for me and the other for my sister
she lives in another city but whenever we see each other, I've always tried to make sure that her phone is running the exact same setup as mine just so I can always provide "tech support" for her phone
anyway, she went on some trip and afterwards, she said her phone wouldn't boot up anymore
since she couldn't get a hold of me, she brought her phone to a store to try and get it fixed (bad bad mistake)
she left the phone at the store for a day to determine how much it would cost to fix it
after being quoted $100 for the fix, she decided it was too much to pay and just took her phone back
long story short... a week later, I finally have the phone in my hand... and this phone won't boots up, i've put in fully charged batteries and when I press (and hold) the power button, it does absolutely NOTHING... not even that initial vibration when it boots up
i've tried to plug it to the computer and it doesn't get recognize
its permanently off and i can't, for the life of me, figure out just how to even boot this thing into TWRP... just so I can attempt to recover her files
SO.... my question... is this truly bricked?
do I have to break the news to her that all the pictures she took on the trip is now unrecoverable?

plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked

JesusWazBlack said:
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
Click to expand...
Click to collapse
it doesn't get recognized at all... cuz there's no way for me to power it up

chan1628 said:
it doesn't get recognized at all... cuz there's no way for me to power it up
Click to expand...
Click to collapse
Definite hard brick and if you do hook it to the computer and it says qhs usb download that means brick as well.
Sent from my SGH-M919 using Tapatalk 2

richardlibeau said:
Definite hard brick and if you do hook it to the computer and it says qhs usb download that means brick as well.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
.... it is as i expected
thx for the help though

chan1628 said:
.... it is as i expected
thx for the help though
Click to expand...
Click to collapse
Had three myself in the past few years but none recently so don't feel bad happens to the best of us.
Sent from my SGH-M919 using Tapatalk 2

richardlibeau said:
Had three myself in the past few years but none recently so don't feel bad happens to the best of us.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
oh man... i hate giving the "i'm sorry, but I can't recover your pictures" speech
esp. to women... sometimes they cry and its so....
wish me luck:good:

JTAG for 50 bucks and your golden
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jtag
holeindalip said:
JTAG for 50 bucks and your golden
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I am hard bricked as well tried updating to new cm10.2 nightly with AJK kernel accidently installed AJK kernel for wrong version oops and now hard bricked wont turn on what so ever. Looked into what phones can be fixed with JIFFY box and JTAG and noticed SGH-t989 not in the list so i am just wondering if this list is wrong and SGH-t989 can actually be saved!?!? any help is appreciated.

Mobile tech videos can fix ya up for 50 if is indeed hard bricked
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

I bricked my S2 last Saturday night, just got it back form Jtag service. Took a week and 28 bucks from the ebay vendor that performed the service.
Now that my phone is back to stock, can anyone help me to load TWRP again. I have odin, latest USB drivers, and TWRP for my phone...but cant seem to get to the ODIN restore screen on the phone.
Volume Up, down, left right, left right, A, B Start. Oh wait I think that was for contra.....
Please help to get me to the Odin load on phone.
I can then flash TWRP thru odin, get to TWRP and load my favorite ROM.
Any GURUS, Please confirm that this is right. I remember a complicated process when rooting initially, loading root file on SD card, similar process up down ect....
But since the rom I am flashing is already rooted, is it required to go thru the gyrations. cant I just flash TWRP and flash a rooted rom?

dss4me3 said:
..
But since the rom I am flashing is already rooted, is it required to go thru the gyrations. cant I just flash TWRP and flash a rooted rom?
Click to expand...
Click to collapse
Just Odin flash TWRP and then flash your rooted ROM.
Download mode= Volume up + volume down + plug USB into computer.

Wont boot up, just keeps vibrating, bricked?
JesusWazBlack said:
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
Click to expand...
Click to collapse
I want to know if my phone is bricked, its a Samsung glaxy sgh-T898 (but from telus) i am using a cynagenmod custom rom 10
i was using it then it went idle then when i went to unlock it back, it shut off and started to repeatedly vibrate like a pulse
so i then did a battery pull and then it vibrate and the "Samsung sgh-t898 logo appeared" for a sec or 2 and the phone shut back off and did the pulsing vibrating thing
i got the same result when i plug it into the charger and computer, even plug it in without the battery in it and pulsing vibrating happen again.
ps this had happen in the past but the phone came on like after 5 mins of, its now been hours it wont come on just keep vibrating

omari3 said:
I want to know if my phone is bricked, its a Samsung glaxy sgh-T898 (but from telus) i am using a cynagenmod custom rom 10
i was using it then it went idle then when i went to unlock it back, it shut off and started to repeatedly vibrate like a pulse
so i then did a battery pull and then it vibrate and the "Samsung sgh-t898 logo appeared" for a sec or 2 and the phone shut back off and did the pulsing vibrating thing
i got the same result when i plug it into the charger and computer, even plug it in without the battery in it and pulsing vibrating happen again.
ps this had happen in the past but the phone came on like after 5 mins of, its now been hours it wont come on just keep vibrating
Click to expand...
Click to collapse
looks like the sticky power button. First try putting compressed air on your power button. then resort to this method http://forum.xda-developers.com/showthread.php?t=1931310

JesusWazBlack said:
looks like the sticky power button. First try putting compressed air on your power button. then resort to this method http://forum.xda-developers.com/showthread.php?t=1931310
Click to expand...
Click to collapse
Thanks for replying so quickly , i think you might be right about sticky power button, because when put in the battery the vibrates begins
automatically and then i try turn on then hold the power and volume keys it entered into download menu but for 2 secs then shut off again and begin to start vibrating(pulsing again)
so i guess the download menu means its not brick, will try suggestion once i get a proper torque screw driver

[Q] Sprint S3 Won't Turn On

So my phone was probably around 50% and I went to grab some food and when I check the phone wouldn't turn on,I rebooted only for it to be stuck on the samsung boot screen and I tried to reboot again except this time it didn't turn on at all.
I didn't do anything at all during the day and my phone was on stable CM10.3 for the past month with no problems.I went home and tried to charge it but no light showed up when charging with battery in and only a red light shows up when i take the battery out and charger in. I connected in to the pc and it showed a QHSUSB_DLOAD when installing drivers. does this mean my phone is bricked? If so how did it happen if CM10.3 was working fine before?

Ftwpker said:
So my phone was probably around 50% and I went to grab some food and when I check the phone wouldn't turn on,I rebooted only for it to be stuck on the samsung boot screen and I tried to reboot again except this time it didn't turn on at all.
I didn't do anything at all during the day and my phone was on stable CM10.3 for the past month with no problems.I went home and tried to charge it but no light showed up when charging with battery in and only a red light shows up when i take the battery out and charger in. I connected in to the pc and it showed a QHSUSB_DLOAD when installing drivers. does this mean my phone is bricked? If so how did it happen if CM10.3 was working fine before?
Click to expand...
Click to collapse
I'm going through almost the exact same problem now. Been up all night trying to fix it searching the internet up and down.

dannyboyex said:
I'm going through almost the exact same problem now. Been up all night trying to fix it searching the internet up and down.
Click to expand...
Click to collapse
Ya I might have to send it to the JTAG guys to repair it...

Ftwpker said:
Ya I might have to send it to the JTAG guys to repair it...
Click to expand...
Click to collapse
From my research i believe the problem is that the internal sd gets messed up and gets stuck in read only mode instead of read/write. Thats why it won't boot and you can't flash anything in odin. still working on a solution. I've tried booting into download mode with a jig but still no dice.

http://forum.xda-developers.com/showthread.php?t=2369125 maybe this will help
Sent from my SPH-L710 using xda app-developers app

IDontKnowMang said:
http://forum.xda-developers.com/showthread.php?t=2369125 maybe this will help
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I've read through that thread but while it had some good info it is for getting a hardbricked phone into download mode which we can get into. I've tried a few things, reintalled drivers re-downloaded tars, etc. now I have the phone ---!---Computer screen when it boots up. I've google searched around since xda search is down an one thread said to keep trying in Odin.
Edit: aaaaaaaaaand now iim hardbricked......

You can get to download mode? Mine can't power on at all atm.

Ftwpker said:
You can get to download mode? Mine can't power on at all atm.
Click to expand...
Click to collapse
It used to. I tried calling Sprint (no help) but now it wont boot. I'm trying the sd card method now