Bricked my phone :( - LG Optimus G Pro

I have the ATT model of LG Optimus G Pro E980.
Today, I rooted my phone and everything went smoothly as it usually does. Everything seemed fine until i tried flashing this http://forum.xda-developers.com/showthread.php?t=2428207
Now I can only boot and get a LG screen and then it just turns black. I got into download mode maybe once or twice but I can't repeat it and the device doesn't seem to show up on my computer either way. I booted into CWM maybe once by smashing keys and it just randomly popped up but its also not repeatable . Any suggestions, I'll honestly try everything.
Thanks

http://forum.xda-developers.com/showthread.php?t=2302660

ahrion said:
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
Thanks I'll try that but i'm not sure if i can get into download mode

nzhao20 said:
Thanks I'll try that but i'm not sure if i can get into download mode
Click to expand...
Click to collapse
At the moment I'm only able to get to the lg screen and a screen that shows a battery (plugged into the computer)
Any suggestions?
Oh and also I'm able to get to factory hard reset.

nzhao20 said:
At the moment I'm only able to get to the lg screen and a screen that shows a battery (plugged into the computer)
Any suggestions?
Oh and also I'm able to get to factory hard reset.
Click to expand...
Click to collapse
1) Pull out the battery. Your phone will be turned off
2) Insert the battery but the phone shoud stay turned off. Plug usb cable to the phone but not to the pc
3) While the phone is off and battery is in, press both volume up and down buttons together (Do it with your single hand)
4) While you are pressing the buttons with your hand, plug the usb cable to the pc with your other hand.
5) You should see phone gets into download mode (DOWNLAD will be written on the screen)
6) Now the pc should recognize the phone.
7) Open LG Mobile Support Tool
8) You should be able to see that it recognizes the phone. If it doesn't, repeat the first 4 steps when LG mobile support tool is open.
9) After your phone is seen by the pc, choose Upgrade Recovery from Options.
10) It will check the FW from internet by using the imei Number of the phone or you can enter E988 and your serial number manually
11) Then it will download the FW and recover your phone. It will take time according your connection speed.

anilakarsu93 said:
1) Pull out the battery. Your phone will be turned off
2) Insert the battery but the phone shoud stay turned off. Plug usb cable to the phone but not to the pc
3) While the phone is off and battery is in, press both volume up and down buttons together (Do it with your single hand)
4) While you are pressing the buttons with your hand, plug the usb cable to the pc with your other hand.
5) You should see phone gets into download mode (DOWNLAD will be written on the screen)
6) Now the pc should recognize the phone.
7) Open LG Mobile Support Tool
8) You should be able to see that it recognizes the phone. If it doesn't, repeat the first 4 steps when LG mobile support tool is open.
9) After your phone is seen by the pc, choose Upgrade Recovery from Options.
10) It will check the FW from internet by using the imei Number of the phone or you can enter E988 and your serial number manually
11) Then it will download the FW and recover your phone. It will take time according your connection speed.
Click to expand...
Click to collapse
The Support Tool does recognize the phone, but I am unable to upgrade recovery. It goes all the way to downloading software, but the time elapsed stays at 00:00:13 (13 seconds). I do have the firmware installed on my computer though, and I am now able to access CWM. Help?

nzhao20 said:
The Support Tool does recognize the phone, but I am unable to upgrade recovery. It goes all the way to downloading software, but the time elapsed stays at 00:00:13 (13 seconds). I do have the firmware installed on my computer though, and I am now able to access CWM. Help?
Click to expand...
Click to collapse
Try flashing firmware via CWM.

anilakarsu93 said:
Try flashing firmware via CWM.
Click to expand...
Click to collapse
Thanks everyone for the suggestions! I solved my problem by going into download mode and flashing the default att rom. If anyone else has this problem you can pm me or i think there is a thread on here titled something like solving lg optimus g pro softbrick

Related

(Help) LG G3 (D855) is in boot loop

I had my set running on stock unrooted and was trying to install segoe UI font via ifont app. After I set my font thru the app, the phone rebooted and it went into a boot loop on the android logo. I tried to hard reset but it still went into the same issue of the boot loop.
What can I do to fix it?
Sent from my HTC One_M8 using Tapatalk
skade said:
I had my set running on stock unrooted and was trying to install segoe UI font via ifont app. After I set my font thru the app, the phone rebooted and it went into a boot loop on the android logo. I tried to hard reset but it still went into the same issue of the boot loop.
What can I do to fix it?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
follow these steps:
1) go to lg site and install lg pc suite
2)connect to pc in download mode(press and hold volume + when inserting usb cable)
3) in the lg pc suite program press repair and follow steps
3*) in case your pc does not recognize your phone download and install this
4) if that does not work try this
5) eugm that was it actually if that didn't work bring it in for a swap/repair
suljo94 said:
follow these steps:
1) go to lg site and install lg pc suite
2)connect to pc in download mode(press and hold volume + when inserting usb cable)
3) in the lg pc suite program press repair and follow steps
3*) in case your pc does not recognize your phone download and install this
4) if that does not work try this
5) eugm that was it actually if that didn't work bring it in for a swap/repair
Click to expand...
Click to collapse
you saved me and my phone!!! Thank you so much for the detailed steps! :good::highfive:
skade said:
I had my set running on stock unrooted and was trying to install segoe UI font via ifont app. After I set my font thru the app, the phone rebooted and it went into a boot loop on the android logo. I tried to hard reset but it still went into the same issue of the boot loop.
What can I do to fix it?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
doesnt that app need root permissions?
ant78 said:
doesnt that app need root permissions?
Click to expand...
Click to collapse
Yeah it does, typo on my part.
suljo94 said:
follow these steps:
1) go to lg site and install lg pc suite
2)connect to pc in download mode(press and hold volume + when inserting usb cable)
3) in the lg pc suite program press repair and follow steps
3*) in case your pc does not recognize your phone download and install this
4) if that does not work try this
5) eugm that was it actually if that didn't work bring it in for a swap/repair
Click to expand...
Click to collapse
where's the repair button ? cant find it anywhere
subwoffer13 said:
where's the repair button ? cant find it anywhere
Click to expand...
Click to collapse
never mind I was joung and wild while I wrote that just do this
do not forget step 10
suljo94 said:
never mind I was joung and wild while I wrote that just do this
do not forget step 10
Click to expand...
Click to collapse
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<response req_cmd="auth_model_check" status="FAIL"/>
firmware download site error
subwoffer13 said:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<response req_cmd="auth_model_check" status="FAIL"/>
firmware download site error
Click to expand...
Click to collapse
have you replaced the "imei" with your imei number?step3
do you use the d855?
suljo94 said:
have you replaced the "imei" with your imei number?step3
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153****17249
like that . doesnt work
subwoffer13 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153****17249
like that . doesnt work
Click to expand...
Click to collapse
is should, have you replaced the numbers for stars of ?
suljo94 said:
is should, have you replaced the numbers for stars of ?
Click to expand...
Click to collapse
that guy guided me through the whole proccess , online .
SUPER thanfull to him , now i know how to flash to stock
This solution helped me! I soft bricked my LG G3 D855 European version by changing a XML file for increasing highest allowed volume as the volume is very low on the LG G3 phone. It caught me in a boot loop and I found this thread.
This is what I did:
1. Removed battery and noted down the IMEI number of my phone.
2. Opened link: csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=XXX
(Where XXX is my IMEI number WITHOUT any dashes! -> Important or your link will fail). Link gave me a kdz file to download on about 1.2 GB.
3. Started phone in Download mode (Volume Up while inserting USB cable --> Note you need LG USB drivers installed).
4. Ran LG Flash tool and chosed my kdz file that I retrieved in step 2. Pressed START and ignored any warnings.
5. The phone downloaded the kdz file to phone and restarted twice.
All good!
Thanks sooo much!!!
Easy way to recover LG G3 D8550
Hey guys heres an easy way to recover the bricked / bootlooped LG G3.
it really is as easy as plug in and choose the update recovery after the phone is checked.
Love you all.
crqzyvonzipper said:
Hey guys heres an easy way to recover the bricked / bootlooped LG G3.
it really is as easy as plug in and choose the update recovery after the phone is checked.
Love you all.
Click to expand...
Click to collapse
can you please explain what your file does?
Hi. Sorry i guess i was a bit too fast to post.
The file is an installer for the windows pc.
Please make sure that usb drivers are installed at least. The phone must be switched off and then started in download mode by pressing volume up while inserting the cable.
The installed program will then check the phone and probably say that the phone is fine. But then you have to choose the "update recovery" option in the application.
Sent from my LG-D855 using XDA Free mobile app
skade said:
I had my set running on stock unrooted and was trying to install segoe UI font via ifont app. After I set my font thru the app, the phone rebooted and it went into a boot loop on the android logo. I tried to hard reset but it still went into the same issue of the boot loop.
What can I do to fix it?
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
suljo94 said:
follow these steps:
1) go to lg site and install lg pc suite
2)connect to pc in download mode(press and hold volume + when inserting usb cable)
3) in the lg pc suite program press repair and follow steps
3*) in case your pc does not recognize your phone download and install this
4) if that does not work try this
5) eugm that was it actually if that didn't work bring it in for a swap/repair
Click to expand...
Click to collapse
Same exact thing happened to me as the OP. Tried following suljo94's steps and it is not working. I've installed, deleted and reinstalled the drivers about 5 different times and all of them install fine except for the Android MTP device driver. It fails every time, and the LG PC Suite won't recognize my phone. It's on download mode, it's up on the phone screen and everything. Tried unplugging it and replugging it from both phone and computer, pulling the battery, using a different USB cable. Nothing works. Uninstalled and reinstalled LG PC Suite too. I really would rather do it this way because I don't want to lose all of the stuff on my phone, but I've been trying to figure this out for 3 hours now and I need my phone. I am seriously at my last nerve before I say screw it and just use the LG Flash tool and wipe everything. Which I really don't want to do =[ Does anyone have any other suggestions to get the PC Suite working?
Galaxy_S_ said:
Same exact thing happened to me as the OP. Tried following suljo94's steps and it is not working. I've installed, deleted and reinstalled the drivers about 5 different times and all of them install fine except for the Android MTP device driver. It fails every time, and the LG PC Suite won't recognize my phone. It's on download mode, it's up on the phone screen and everything. Tried unplugging it and replugging it from both phone and computer, pulling the battery, using a different USB cable. Nothing works. Uninstalled and reinstalled LG PC Suite too. I really would rather do it this way because I don't want to lose all of the stuff on my phone, but I've been trying to figure this out for 3 hours now and I need my phone. I am seriously at my last nerve before I say screw it and just use the LG Flash tool and wipe everything. Which I really don't want to do =[ Does anyone have any other suggestions to get the PC Suite working?
Click to expand...
Click to collapse
I didnt loose any of my data doing this procedure:
This solution helped me! I soft bricked my LG G3 D855 European version by changing a XML file for increasing highest allowed volume as the volume is very low on the LG G3 phone. It caught me in a boot loop and I found this thread.
This is what I did:
1. Removed battery and noted down the IMEI number of my phone.
2. Opened link: csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=XXX
(Where XXX is my IMEI number WITHOUT any dashes! -> Important or your link will fail). Link gave me a kdz file to download on about 1.2 GB.
3. Started phone in Download mode (Volume Up while inserting USB cable --> Note you need LG USB drivers installed).
4. Ran LG Flash tool and chosed my kdz file that I retrieved in step 2. Pressed START and ignored any warnings.
5. The phone downloaded the kdz file to phone and restarted twice.
All good!
Click to expand...
Click to collapse
nickswe said:
I didnt loose any of my data doing this procedure:
Click to expand...
Click to collapse
Doesn't work.
Galaxy_S_ said:
Doesn't work.
Click to expand...
Click to collapse
What does not work?

[Q] LG G3 D855 Won't boot

Hey,
After rooting my D855 worked perfect until it the battery drained. Now, with a fully charged battery, it won't boot. It's currently stuck at the LG boot screen with the LED's cycling colours. Custom recovery isn't installed so I factory reset it using stock recovery and it still won't boot. When I connect it to my iMac, Android File Transfer recognises a device but tells me it's not available.
If anyone needs any info then please ask, hopefully someone is able to help.
Stuart
stuartb29 said:
Hey,
After rooting my D855 worked perfect until it the battery drained. Now, with a fully charged battery, it won't boot. It's currently stuck at the LG boot screen with the LED's cycling colours. Custom recovery isn't installed so I factory reset it using stock recovery and it still won't boot. When I connect it to my iMac, Android File Transfer recognises a device but tells me it's not available.
If anyone needs any info then please ask, hopefully someone is able to help.
Stuart
Click to expand...
Click to collapse
have you messed with build.prop are other system files?
anyway to restore your phone follow my steps exactly
1) pull out the battery and press and hold volume+ while connecting charger
2) release buttons when phone says download mode.
3)download your firmware via this site, replace imei of my url with your imei number (see box)
4)download this tool and navigate to your file with the "find kdz option"(do not change the other fields)
5) press normal download
6) press start chose your country and language
7) ignore the could not connect to server error
8) if that didn’t work try it over from step 5 but now with cse flash instead of normal flash
9) do not disconnect until you boot completely up for the second time
10) thank me for my post
suljo94 said:
have you messed with build.prop are other system files?
anyway to restore your phone follow my steps exactly
1) pull out the battery and press and hold volume+ while connecting charger
2) release buttons when phone says download mode.
3)download your firmware via this site, replace imei of my url with your imei number (see box)
4)download this tool and navigate to your file with the "find kdz option"(do not change the other fields)
5) press normal download
6) press start chose your country and language
7) ignore the could not connect to server error
8) if that didn’t work try it over from step 5 but now with cse flash instead of normal flash
9) do not disconnect until you boot completely up for the second time
10) thank me for my post
Click to expand...
Click to collapse
Thank you so much! Worked a charm!
Than you too! Its working!

LG G Pro E988 stuck on the Logo screen

I have just flash the custom 5.0.2 ROM using philz touch 6.48.4.
After I flashed the ROM, I reboot to the philz recovery and flashed back to cwm 6.0.4.8.
However, the device stuck on the LG logo screen.
I have try to enter Download mode/Emergence mode/Hard reset mode/Recovery, but all of them I cannot go into.
Please help! Thank you for your helping!!
pchuen said:
I have just flash the custom 5.0.2 ROM using philz touch 6.48.4.
After I flashed the ROM, I reboot to the philz recovery and flashed back to cwm 6.0.4.8.
However, the device stuck on the LG logo screen.
I have try to enter Download mode/Emergence mode/Hard reset mode/Recovery, but all of them I cannot go into.
Please help! Thank you for your helping!!
Click to expand...
Click to collapse
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
hawkwind212 said:
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
Click to expand...
Click to collapse
Thank you for replying.
I cannot do anythings since I cannot enter into download mode.
I pressed volume key + and - and insert the usb cable to computer. There is nothing happened, computer dose not show the devices attached and the phone stay in the LG logo screen.
Also, I cannot use adb commands to force the phone enters into download mode as it shows nothings under "List of devices".
Is there any methods I can go into the download mode???
Thank you!
pchuen said:
Thank you for replying.
I cannot do anythings since I cannot enter into download mode.
I pressed volume key + and - and insert the usb cable to computer. There is nothing happened, computer dose not show the devices attached and the phone stay in the LG logo screen.
Also, I cannot use adb commands to force the phone enters into download mode as it shows nothings under "List of devices".
Is there any methods I can go into the download mode???
Thank you!
Click to expand...
Click to collapse
If your phone shows LG start screen, it should go into Download mode. I had similar problem few days ago while I was testing some kernel patches, it just froze on the LG screen. Solution was to unplug it, remove it's battery, SIM & SD (you don't have to remove SIM & SD, I just work that way) , make sure it's off, return battery back, press Vol + & Vol - at the same time and plug-in the USB cable.
Before that, make sure you have installed LG Unified driver (can be obtained via LG's software from support site), because without that Windows won't recognise your device.
After that, once you make your phone usable with Freegee/whatever you use to install initial recovery, flash official TWRP, because others are too old - that Philz CWM is old but still working with Lollipop but not work good and is tends to lock itself into a bootloop if you use hardware keys to enter; that other one, from GPRO_recovery APK is not supported and not working well (for me since day one), so it should be replaced as soon as possible.
Also, I can suggest you to flash your phone from stock 4.1 (not KitKat), root, flash recovery via freegee and after reboot update to latest official TWRP via Flashify.
hawkwind212 said:
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
Click to expand...
Click to collapse
ShadySquirrel said:
If your phone shows LG start screen, it should go into Download mode. I had similar problem few days ago while I was testing some kernel patches, it just froze on the LG screen. Solution was to unplug it, remove it's battery, SIM & SD (you don't have to remove SIM & SD, I just work that way) , make sure it's off, return battery back, press Vol + & Vol - at the same time and plug-in the USB cable.
Before that, make sure you have installed LG Unified driver (can be obtained via LG's software from support site), because without that Windows won't recognise your device.
After that, once you make your phone usable with Freegee/whatever you use to install initial recovery, flash official TWRP, because others are too old - that Philz CWM is old but still working with Lollipop but not work good and is tends to lock itself into a bootloop if you use hardware keys to enter; that other one, from GPRO_recovery APK is not supported and not working well (for me since day one), so it should be replaced as soon as possible.
Also, I can suggest you to flash your phone from stock 4.1 (not KitKat), root, flash recovery via freegee and after reboot update to latest official TWRP via Flashify.
Click to expand...
Click to collapse
Thank you for your detail reply.
I have tried to reinstall the LG driver and try to enter download mode again.
The screen is still stuck on LG logo and I cannot find the device in hardware manager (cannot recognize it).
I cannot do anythings until it can recognize it.
(Is it the bootloader is broken? and can I fix it?)
Thank you very much and waiting for your reply soon.:good:
pchuen said:
Thank you for your detail reply.
I have tried to reinstall the LG driver and try to enter download mode again.
The screen is still stuck on LG logo and I cannot find the device in hardware manager (cannot recognize it).
I cannot do anythings until it can recognize it.
(Is it the bootloader is broken? and can I fix it?)
Thank you very much and waiting for your reply soon.:good:
Click to expand...
Click to collapse
Which version of Windows are you using? It should be displayed under Serial ports in Device manager (named something like LGE Serial device) and LGFlashTool should recognise it immediately. I can't make you a screenshot/check for real name because I'm running Linux right now and can't reboot.
Also, try with another cable/port, remove all other android drivers you may have (Samsung's, Google's...) and disable antivirus.
ShadySquirrel said:
Which version of Windows are you using? It should be displayed under Serial ports in Device manager (named something like LGE Serial device) and LGFlashTool should recognise it immediately. I can't make you a screenshot/check for real name because I'm running Linux right now and can't reboot.
Also, try with another cable/port, remove all other android drivers you may have (Samsung's, Google's...) and disable antivirus.
Click to expand...
Click to collapse
It does not work on Windows 7 and XP.
I did not find any LGE XXX under Serial ports part.
Thank you!
pchuen said:
It does not work on Windows 7 and XP.
I did not find any LGE XXX under Serial ports part.
Thank you!
Click to expand...
Click to collapse
Hm.... Phone shows that it have entered download mode? Black screen, centered gray message and "DOWNLOAD MODE" red text?
ShadySquirrel said:
Hm.... Phone shows that it have entered download mode? Black screen, centered gray message and "DOWNLOAD MODE" red text?
Click to expand...
Click to collapse
No... nothing happens, just showing LG logo...
pchuen said:
No... nothing happens, just showing LG logo...
Click to expand...
Click to collapse
OK, it doesn't enter download mode. So, step by step:
- remove battery and leave it for 15-30 seconds, return battery
- press Vol+ and Vol- at the same time and keep them pressed,
- plug USB cable in while keys are pressed
It should immediately put you into download mode, with no LG screen, just black screen with gray box and red text I've described to you.
ShadySquirrel said:
OK, it doesn't enter download mode. So, step by step:
- remove battery and leave it for 15-30 seconds,
- press Vol+ and Vol- at the same time and keep them pressed,
- plug USB cable in while keys are pressed
It should immediately put you into download mode, with no LG screen, just black screen with gray box and red text I've described to you.
Click to expand...
Click to collapse
I understand what download mode screen is.
I followed your methods, bur I still cannot enter it and the computer cannot recognize that.
Sorry for disturbing :crying:
pchuen said:
I understand what download mode screen is.
I followed your methods, bur I still cannot enter it and the computer cannot recognize that.
Sorry for disturbing :crying:
Click to expand...
Click to collapse
So, whatever you try to do, phone just shows LG logo, not even a message in an upper left corner?
I'm running out of ideas. I have exact same variant (E988) but only time it didn't want to enter download mode this way was when cable I was using was broken...
ShadySquirrel said:
So, whatever you try to do, phone just shows LG logo, not even a message in an upper left corner?
I'm running out of ideas. I have exact same variant (E988) but only time it didn't want to enter download mode this way was when cable I was using was broken...
Click to expand...
Click to collapse
I have changed the cable, but it is the same.

security verification boot error... :(

i have facing this issue since when i unroot my g3 d855 then i forget to close the lg flash tool and accidently i plugged my phone to computer then it went to firmware upgrade mode then i unplugged immediately.Since then my phone stuck in security boot error and i cant go to download mode and the recovery(power+volume down) is also not working,plz help plz..
bishal_red_rvp said:
i have facing this issue since when i unroot my g3 d855 then i forget to close the lg flash tool and accidently i plugged my phone to computer then it went to firmware upgrade mode then i unplugged immediately.Since then my phone stuck in security boot error and i cant go to download mode and the recovery(power+volume down) is also not working,plz help plz..
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
bishal_red_rvp said:
i have facing this issue since when i unroot my g3 d855 then i forget to close the lg flash tool and accidently i plugged my phone to computer then it went to firmware upgrade mode then i unplugged immediately.Since then my phone stuck in security boot error and i cant go to download mode and the recovery(power+volume down) is also not working,plz help plz..
Click to expand...
Click to collapse
FIRST install the DRIVER from this thread: http://forum.xda-developers.com/showthread.php?t=2785089
See in the part 2015 with TOT files...
(if any other drivers are present, uninstall them and do a clean install)
You need to get in Download mode to be able to fix it without having to open the phone.
1. Unplug phone from pc and power off
2. Remove back cover and remove the battery
3. Plug the micro-usb cable into the phone
4. Press and HOLD the VOLUME DOWN (make sure you press it from the edge, far from the powerbutton)
5. Put the battery - Dont let go of Volume Down yet.
6. Connect the micro-usb cable to the pc - Dont let go of volume down yet
7. Wait for the pc to recognize it, and the download mode appears on the phone, now you can let go of volume down
Repeat again, first time might not work.
Post results here...
PS, quote me because i might not see and answer then. good luck

LG G3 Stuck in Factory Reset Status 2

Hello there,
Today my rom (Xenon HD) stopped working and i wanted to get my old stock rom back.
So i started to downgrade, but in the end i ended up in the Factory Reset Status 2 after it shows the boot animation of an os called "mini os".
Anybody got experience on this ?
Thanks
Baschdi
Factory Reset 2
Baschdi_ said:
Hello there,
Today my rom (Xenon HD) stopped working and i wanted to get my old stock rom back.
So i started to downgrade, but in the end i ended up in the Factory Reset Status 2 after it shows the boot animation of an os called "mini os".
Anybody got experience on this ?
Thanks
Baschdi
Click to expand...
Click to collapse
First remove your battery then insert battery dont power on mobile . holding the volume up, plug in a microUSB cable into your phone.
Make sure the USB side is already plugged into the computer
You should start to see "Download Mode" for a few seconds and then it will show "Firmware Update". You are now in Download Mode!
Open LG Flash Tool and Put your dll and tot files in and use Board DL (Very Important)
after u success
It should boot into MiniOS just hit ok. Push power button plus touch the screen where it says Normal boot+(power)
done
This is not working for me. it says waiting for connection, please help
i am frustrated !!!
likhil2k3 said:
This is not working for me. it says waiting for connection, please help
i am frustrated !!!
Click to expand...
Click to collapse
Try unplugging and plugging back in and ensure you are on PORT41 for the device driver. After you do that and in Download Mode, then unplug and replug USB.
Also do not use USB 3 and try another port if you still have issues.
Bhimani bhargav said:
First remove your battery then insert battery dont power on mobile . holding the volume up, plug in a microUSB cable into your phone.
Make sure the USB side is already plugged into the computer
You should start to see "Download Mode" for a few seconds and then it will show "Firmware Update". You are now in Download Mode!
Open LG Flash Tool and Put your dll and tot files in and use Board DL (Very Important)
after u success
It should boot into MiniOS just hit ok. Push power button plus touch the screen where it says Normal boot+(power)
done
Click to expand...
Click to collapse
I have same issue in my LG G3 D850 I have apply your procedure Thanks It works ... first time the setup screen completes but when i powered off mobile and insert the sim and then powered on its again going to miniOs again i Normal boot+(power) but now boot looping auto ... what can i do now ???
For me who had the same issue, I just rebooted the device back into download mode and the LG flashtool resumed automatically. (I did not close or stop the process from the LG flashtool when I got this message).
Once the process resumed automatically, I still got download fail.
I can see whenever the device reboots, the modem disappears from within device manager after getting to the "Factory Reset 2" screen.
Any advice?
Update: I tried about 7 times to get it flashed. I ended up just restarting the phone in normal mode and strangely voila it works perfectly. Even though the software said the flash failed, it still worked. Thanks anyway!
Bhimani bhargav said:
First remove your battery then insert battery dont power on mobile . holding the volume up, plug in a microUSB cable into your phone.
Make sure the USB side is already plugged into the computer
You should start to see "Download Mode" for a few seconds and then it will show "Firmware Update". You are now in Download Mode!
Open LG Flash Tool and Put your dll and tot files in and use Board DL (Very Important)
after u success
It should boot into MiniOS just hit ok. Push power button plus touch the screen where it says Normal boot+(power)
done
Click to expand...
Click to collapse
This worked. Tks a lot.
I just got a LG harmony and as i soon turned it on it went to factory reset status and I tried to bypass but it keeps taking me to Factory reset, I also tried the download mode which took me to firmware update for hours it has still been at 0%. Taking forever
Bhimani bhargav said:
Factory Reset 2
First remove your battery then insert battery dont power on mobile . holding the volume up, plug in a microUSB cable into your phone.
Make sure the USB side is already plugged into the computer
You should start to see "Download Mode" for a few seconds and then it will show "Firmware Update". You are now in Download Mode!
Open LG Flash Tool and Put your dll and tot files in and use Board DL (Very Important)
after u success
It should boot into MiniOS just hit ok. Push power button plus touch the screen where it says Normal boot+(power)
done
Click to expand...
Click to collapse
thank you very much ,it work succesful

Categories

Resources