[BOOT+DOWNANIMATION] HTC One with Beats Audio - One (M7) Themes and Apps

OK so this is my first attempt at making a custom boot animation, It may not be perfect as I've never edited video like this before, but I use it on my One and it works like a dream, it's also a little longer than your usual boot animation, but it does kinda show off the phone a bit more itself too. I've also included the audio that I use with this too.
animation consists of parts from the HTC Promo Ad and also i believe the beats part comes from the HTC Sensation XL boot up.
I have also uploaded a Video Preview here: Video
UPDATE 05/09/2013: Here is a flashable zip for people using MaximusHD ROM: HTC-One-Beats_customboot-signed.zip (47.6 MB)
Re-uploaded the ZIP as the previous zip had an error in the downanimation file name and caused the standard downanimation to run instead of custom one. Please download the updated zip file above and flash in recovery as normal
Files...
HTC-One-Beats boot animation.zip (39.5 MB)
HTC-Boot-Music.mp3 (365 KB)
downanimation.zip (7.5 MB)
now i'm not sure about other roms but for people using ARHD the zip needs go here /system/customize/resource/bootanimation.zip
and the audio file needs to be here /system/customize/resource/HTC_Sense5_Boot.mp3 or htc_boot.mp3
shutdown animation goes here /system/customize/resource/downanimation.zip
DISCLAIMER: YOU TAKE FULL RESPONSIBILITY TO WHATEVER YOU DO TO YOUR OWN PHONE. I CLAIM NO RESPONSIBILITY.​

First of all thanks. Second , can you make it a flashable zip ? I have the Maximus HD rom (4.3 wth Sense 5) and after i copy them to the system i try to reboot. The downanimation works but the boot up animation is still stock. After the boot if i restart again everything goes back to original(boot up and downanimation). What i've tried so far are the After Effects and the Adroid Hammer animations. These are flashable zips dough.

I'll see what I can do
Sent from my HTC One using XDA Premium HD app

Alexzander said:
First of all thanks. Second , can you make it a flashable zip ? I have the Maximus HD rom (4.3 wth Sense 5) and after i copy them to the system i try to reboot. The downanimation works but the boot up animation is still stock. After the boot if i restart again everything goes back to original(boot up and downanimation). What i've tried so far are the After Effects and the Adroid Hammer animations. These are flashable zips dough.
Click to expand...
Click to collapse
OK so i've updated the OP with a flashable zip for the MaximusHD ROM, I have tested it on that ROM on my HTC One and it works fine.
Let me know how you get on

You are the greatest ! Works like a charm!
PS: Now i can't stop rebooting my phone lol =)) , I love it .

Alexzander said:
You are the greatest ! Works like a charm!
PS: Now i can't stop rebooting my phone lol =)) , I love it .
Click to expand...
Click to collapse
Haha thanks I'm glad you like it.
I know its a bit of a long boot animation but I thought it would be a pretty cool idea. Plus I actually think its almost the right length for how long the phone actually takes to boot =D
Sent from my HTC One using XDA Premium HD app

Hello,
I have problem with sound in boot annimation
I moved the sound file to /system/customize/resource/ also I cheged the name on HTC_Sense5_Boot.mp3 or htc_boot.mp3 but I do not have sound during boot annimation.
Do you know what i have to do to have sound ?
Best Regards,

zoltan78 said:
Hello,
I have problem with sound in boot annimation
I moved the sound file to /system/customize/resource/ also I cheged the name on HTC_Sense5_Boot.mp3 or htc_boot.mp3 but I do not have sound during boot annimation.
Do you know what i have to do to have sound ?
Best Regards,
Click to expand...
Click to collapse
Hi sorry for the late reply. If you go to /system/customize/CID and open the default.xml file, scroll to the end about 95% and what you're looking for is this bit:
<BootConfiguration>
<BootAnimation animation="/system/customize/resource/bootanimation.zip" audio="/system/customize/resource/HTC_Sense5_Boot.mp3" />
</BootConfiguration>
The last part of the boot script that says audio, whatever that says you need to make sure the name and location of your boot audio is the same. For instance mine is /system/customize/resource/HTC_Sense5_Boot.mp3
I hope this helps
Sent from my HTC One using XDA Premium HD app

Paranoid
hello sir , im using paranoid android 4.3 . tried flash with cwm but installation aborted (status 7)

Hkifuos said:
hello sir , im using paranoid android 4.3 . tried flash with cwm but installation aborted (status 7)
Click to expand...
Click to collapse
The flashable is only for Sense 5 based ROMs. You'll have to manually put the files where they need to go. However since I've never used paranoid android, I'm not sure of the exact locations or what the file names need to be.
I'll see if I can find out and upload a flashable.
Sent from my HTC One using XDA Premium HD app

.
dazr87 said:
The flashable is only for Sense 5 based ROMs. You'll have to manually put the files where they need to go. However since I've never used paranoid android, I'm not sure of the exact locations or what the file names need to be.
I'll see if I can find out and upload a flashable.
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Thanks

Hkifuos said:
hello sir , im using paranoid android 4.3 . tried flash with cwm but installation aborted (status 7)
Click to expand...
Click to collapse
I just try to flash the zip on my TrickDroid 10.0.0 with 4.3, and get the same issue. But after rebooting the Animation works complete with audio and full length. I don´t know why but it feel´s good.
Great work :good:

Kleemy said:
I just try to flash the zip on my TrickDroid 10.0.0 with 4.3, and get the same issue. But after rebooting the Animation works complete with audio and full length. I don´t know why but it feel´s good.
Great work :good:
Click to expand...
Click to collapse
thanks. i'm glad you like it

Related

Quietly brillant boot animation

Long ago when i rooted it had that boot animation, once flashed to a diff rom i lost it. Anyone have that file for our evos...? Thanks
Sent from my PC36100 using XDA App
Im guessing it was from one of the PC36xxx.zip files when gaining root access?
Just download the zip file to your computer, unzip, navigate to the bootanimation folder and take the files out.
iceman99393 said:
Long ago when i rooted it had that boot animation, once flashed to a diff rom i lost it. Anyone have that file for our evos...? Thanks
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I was looking for it myself.. I found one but it was HVGA, I then realized that the new Desire HD ROMs had them, so if you dig through the ROM you'll be able to extract it from there.
iceman99393 said:
Long ago when i rooted it had that boot animation, once flashed to a diff rom i lost it. Anyone have that file for our evos...? Thanks
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Haha, I am currently using that one for my custom ROM. You can get it from my ROM or you can just download the MANUP theme and rip it out of there. That is how I got it on mine.
I used it when I got epic failz trying to make my own custom boot animation. The animation looks fine, just could not get it to work.
That or just flash the Manup theme and it will replace automatically with that one.

ICS startup shutdown on 2.3.6?

Anyone have a way to add ICS startup and shutdown animations to stock rooted de-ciq'ed 2.3.6?
I've seen it custom roms so far, it would be once to a least add it
Sent from my SGH-T989 using xda premium
I would be most interested in this. I'm unable to find any ICS boot animations in this section. Anyone know if it can be extracted straight from the GN and simply be placed in the boot animation directory without consequences?
iLeopard said:
I would be most interested in this. I'm unable to find any ICS boot animations in this section. Anyone know if it can be extracted straight from the GN and simply be placed in the boot animation directory without consequences?
Click to expand...
Click to collapse
You need a kernel/rom that supports bootanimation.zip
The stock/touchwiz based roms use a .qmg file for the animation instead.
Also the images in the bootanimation.zip would need to be modified for our resolution 400*800 as opposed to the 1280*720 of the Nexus.
The bootanimation.zip is already available for 400*800 devices & I can confirm it works beautifully on CM7
TeraHurtz said:
You need a kernel/rom that supports bootanimation.zip
The stock/touchwiz based roms use a .qmg file for the animation instead.
Also the images in the bootanimation.zip would need to be modified for our resolution 400*800 as opposed to the 1280*720 of the Nexus.
The bootanimation.zip is already available for 400*800 devices & I can confirm it works beautifully on CM7
Click to expand...
Click to collapse
Thanks for the response
I'm running Darkside's kernel which supports custom boot animations so thats not a problem.
I assume thats what a CWM flash able zip flashes correct?
Sounds reasonable
Pardon me, but I was unable to find the thread containing the ICS boot animation, could you point me in the right direction?
iLeopard said:
Thanks for the response
I'm running Darkside's kernel which supports custom boot animations so thats not a problem.
I assume thats what a CWM flash able zip flashes correct?
Sounds reasonable
Pardon me, but I was unable to find the thread containing the ICS boot animation, could you point me in the right direction?
Click to expand...
Click to collapse
Do not assume, no it is not a flashable .zip, you will need to manually insert to system/etc/media/
I usually rename the existing one to bootanimation.zip.bak just in case.....
Let me see if I can post it for ya !
TeraHurtz said:
Do not assume, no it is not a flashable .zip, you will need to manually insert to system/etc/media/
I usually rename the existing one to bootanimation.zip.bak just in case.....
Let me see if I can post it for ya !
Click to expand...
Click to collapse
Okay cool I'll give this a go thanks!
iLeopard said:
Okay cool I'll give this a go thanks!
Click to expand...
Click to collapse
Great ! Let me know what you think !
TeraHurtz said:
Great ! Let me know what you think !
Click to expand...
Click to collapse
Worked great thanks for that
Btw it was "/system/media" not "/system/etc/media"

Kernel Messages boot animation

Hi,
I have made this custom boot image for myself and I wanted to share it.
I have disabled the bootanimation and I have enabled the kernel messages instead.
just flash the boot image and remove/rename /system/bin/bootanimation
if anyone is willing to help I would create an update zip which flashes the boot partition and renames /system/bin/bootanimation
Cheers,
Matteo
teknoraver said:
Hi,
I have made this custom boot image for myself and I wanted to share it.
I have disabled the bootanimation and I have enabled the kernel messages instead.
just flash the boot image and remove/rename /system/bin/bootanimation
if anyone is willing to help I would create an update zip which flashes the boot partition and renames /system/bin/bootanimation
Cheers,
Matteo
Click to expand...
Click to collapse
Nice work bro
Sent from my Galaxy Nexus using xda premium
Hey man can u make please zip for recovery
Sent from my Galaxy Nexus using xda premium
leos0000 said:
Hey man can u make please zip for recovery
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I've never did that, but if someone is kind enough to do it or point me to a good tutorial I will do
CM9 Skankwich doesn't like it, causes non-stop FC's upon bootup.
Do you know if this will work on a HTC One X?
Thanks
tidal25w said:
Do you know if this will work on a HTC One X?
Thanks
Click to expand...
Click to collapse
I really don't think so! This is as far as I know a modified Galaxy nexus boot image.
The thread was moved to "Galaxy Nexus Themes and Apps" but I don't really think that it's correct.
Tecnically it isn't a boot animation, is a kernel hack to disable it and show the "raw" boot.
Everything that is printed is printed by the TTY subsystem, it's not rendered by a bootanimation
this is awesome. I disabled my boot animation and it only shows the kernel messages for a few seconds then a plain android boot animation appears. Is there any way to make it longer or is that all that is supposed to come up?
i am on aokp b37 also.
good work!
@teknoraver
I would like to add this as a completely new section in my boot animation thread if that's cool??
Couple of clarifications though:
This looks more like a kernel edit to me and therefore this is somewhat ROM specific in that if folks flash this boot.img it will disable certain ROM specific features controlled by the kernel?
Assuming the above is true, a per ROM boot.img would need to be created to make this work whilst preserving all functionality?
To give an example, if you flash a custom kernel over cm9 you will find some of the settings options are blanked out and you are no longer able to use them unless you have a specific kernel control app or you start fiddling around with init.d scripts.
This sounds kind of like "live logcat", is it similar?
leets4uc3 said:
this is awesome. I disabled my boot animation and it only shows the kernel messages for a few seconds then a plain android boot animation appears. Is there any way to make it longer or is that all that is supposed to come up?
i am on aokp b37 also.
good work!
Click to expand...
Click to collapse
You need to rename /system/bin/bootanimation to something else
WiredPirate said:
This sounds kind of like "live logcat", is it similar?
Click to expand...
Click to collapse
exactly what I came here to say. I tried it a while back and it worked flawlessly: https://play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite&hl=en
ArmanUV said:
exactly what I came here to say. I tried it a while back and it worked flawlessly: https://play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite&hl=en
Click to expand...
Click to collapse
No it's different.
Livelogcat is a bootanimation which draws logcat messages in a complex manner.
My patch disables the animation and let the kernel print messages like it does on PC and servers:
http://www.youtube.com/watch?v=bo7f1UHb-Fs
http://youtu.be/NQ8rzbW1Wdk?t=41s
can you give us the source code?
teknoraver said:
...
if anyone is willing to help I would create an update zip which flashes the boot partition and renames /system/bin/bootanimation
Cheers,
Matteo
Click to expand...
Click to collapse
Here, flashable zip in recovery
Using any kernel format installer (koush) does not touch the existing ramdisk (no problem on CM etc)
and Kernel.Messages.bootanimation_Restore.zip reverting /system/bin/bootanimation
(Edit : If you deleted that file already, flash Installing_system.bin.bootanimation.zip to restore)
I used image flasher GUI on my ns4g but apparently it is not supported for gnex. What are some other methods of flashing an image.
Sent from my Galaxy Nexus

[REQ] Nexus 4 boot logo

Hi
Does anybody have a CWM flashable Zip for the Nexus4 Boot Logo.
Just flashed a ROM & I have the boring old "Android" on startup.
I'd like to have the glowing Nexus "X" logo back again
Thanks.:good:
I'd just download a ROM with it and extract it. However, you might like this. Don't remember where i found it but it matches the nexus perfectly.
Here's a better idea of what you're looking at.
you mean boot animation
I use the bootanimation provided above and like it. Works on my Galaxy Nexus also.
Here's the link for the original X from the Nexus One. http://forum.xda-developers.com/showthread.php?t=1402764 I actually prefer this over the new X.
Tried flashing this in CWM and nothing changed...
jackdonogy said:
Tried flashing this in CWM and nothing changed...
Click to expand...
Click to collapse
Don't flash boot animations . use a root explorer to paste in /system/media
Sent from my Nexus 4 using xda app-developers app
Jordanooo said:
Don't flash boot animations . use a root explorer to paste in /system/media
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
What he said. Unless the person who posted it says its a flashable bootanimation.
To verify, open up the zip file. If it's a bunch of folders named /part0/ /part1/ etc then its not flashable.
Flashable: has a folder to /data/... or /system/media
chances are they're not flashable. but open to check.
Same here,
after I tried to get a custom boot animation it only shows the default "android" logo on boot.
I messed with the premissions in /styem/media/ can I revert that ?
+1 for the idea of a flashable version - specifically one compatible with Cyanogenmod
I have been running nightlies via CyanDelta and would LOVE to have a bootanimation zip that I could plop in the auto-install script to bring back the stock Nexus 'x' boot. Sadly every flashable bootanimation for the original nexus logo I have tried seems to install the files in the wrong location for CM.
jhawkins002 said:
+1 for the idea of a flashable version - specifically one compatible with Cyanogenmod
I have been running nightlies via CyanDelta and would LOVE to have a bootanimation zip that I could plop in the auto-install script to bring back the stock Nexus 'x' boot. Sadly every flashable bootanimation for the original nexus logo I have tried seems to install the files in the wrong location for CM.
Click to expand...
Click to collapse
store the bootanimation in /data/local/
after flashing a new nightly or whatever, it will keep your bootanimation. only way for it to reset is if you do a factory reset. enjoy.
(worked on my galaxy nexus, not sure if it works on N4 but it should, try it, shouldnt harm you.. pretty positive that its the same on N4)
edit: the bootanimation i linked earlier is a cwm flashable one. to manually do it just extract bootanimation.zip from the zip file downloaded.
zephiK said:
store the bootanimation in /data/local/
after flashing a new nightly or whatever, it will keep your bootanimation. only way for it to reset is if you do a factory reset. enjoy.
(worked on my galaxy nexus, not sure if it works on N4 but it should, try it, shouldnt harm you.. pretty positive that its the same on N4)
edit: the bootanimation i linked earlier is a cwm flashable one. to manually do it just extract bootanimation.zip from the zip file downloaded.
Click to expand...
Click to collapse
Thanks for the tip! Just tried the manual push to /data/local but no joy. Upon boot it was blank, and the nightly flash restored the CM default in any event. Might be a permissions issue - should 644 and be owned by system, correct?
Does anyone have a method to change the boot logo i.e. the Google logo?
I'm looking to personalise it.
blackadder1000 said:
Does anyone have a method to change the boot logo i.e. the Google logo?
I'm looking to personalise it.
Click to expand...
Click to collapse
That's what I'm looking for... Changing the logo before the animation.
Sent from my Nexus 4 using xda premium
http://forum.xda-developers.com/showthread.php?t=1888848
You're welcome.
Its a flashable zip too. Worked on my AOKP ROM back in the day, along with cyanogen.
Just read that threads OP. He himself extracted it from his G Nex, so it *TECHNICALLY SPEAKING* is safe to flash on our phones. But still, remember to have a nandroid for any *just in case* moment.
Sent from my Nexus 7 using xda app-developers app
bigwilly90210 said:
That's what I'm looking for... Changing the logo before the animation.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
+1
Sent from my Nexus 4 using xda premium
jaestreetss said:
+1
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
used to be able to do this on my Droid 1 and loved messing with it. It's not part of the kernel so it must be boot loader... do we have any way of tearing that down? I'm assuming we'd have to be unlocked... ha. Would love it if someone more knowledgeable would chime in.... thanks.

Status 6 and status 7 error

Hi Team,
Just few mins before with the help of ur team i finally rooted my htc wfs n took backup of my current rom.
I started installing jelly bean 4.1.2 as my first custom rom, but while installing first i got "status 7" error....So i searched and got a solution to delete first line in updater-script and started reinstalling, but now i am facing "status 6" error...
Please help me out in installing this.
Thanks...
keerthi1188 said:
Hi Team,
Just few mins before with the help of ur team i finally rooted my htc wfs n took backup of my current rom.
I started installing jelly bean 4.1.2 as my first custom rom, but while installing first i got "status 7" error....So i searched and got a solution to delete first line in updater-script and started reinstalling, but now i am facing "status 6" error...
Please help me out in installing this.
Thanks...
Click to expand...
Click to collapse
which recovery you are using and if possible can you send your meta-inf folder?
crossfire77 said:
which recovery you are using and if possible can you send your meta-inf folder?
Click to expand...
Click to collapse
I am using CWM mode recovery using ROM Manager....
How tom send my meta-inf folder...?
keerthi1188 said:
I am using CWM mode recovery using ROM Manager....
How tom send my meta-inf folder...?
Click to expand...
Click to collapse
okay just copy it from rom then zip it and attach with this post.
crossfire77 said:
okay just copy it from rom then zip it and attach with this post.
Click to expand...
Click to collapse
Please find the attachment for the file u asked...I have archived it by .rar extension....
keerthi1188 said:
Please find the attachment for the file u asked...I have archived it by .rar extension....
Click to expand...
Click to collapse
okay this should be working put this meta-inf in your rom and then flash it.
FYI. use .zip format whenever it's upto any zip related to android because .rar won't work with recovery.
crossfire77 said:
okay this should be working put this meta-inf in your rom and then flash it.
FYI. use .zip format whenever it's upto any zip related to android because .rar won't work with recovery.
Click to expand...
Click to collapse
Thank u very much sir...It worked...
Its my first custom rom m using n its fine..
If i open camera nor video, the screen is blur i cant see the exact image nor video. But once i captured it then the image appears fine in gallery..Reason behind this...?
Once again thank u very much sir.....!
keerthi1188 said:
Thank u very much sir...It worked...
Its my first custom rom m using n its fine..
If i open camera nor video, the screen is blur i cant see the exact image nor video. But once i captured it then the image appears fine in gallery..Reason behind this...?
Once again thank u very much sir.....!
Click to expand...
Click to collapse
That's because the camera app in jellybean was not fully compatible with our wfs... BT now it's made fully working by the genius dev jdevs..:thumbup:
So u download the latest 4.2.2 jellybean built by jdev... It is almost bug free...

Categories

Resources