Develop Bugs

[TOOL] == Secret Menu Exploit ==

YOU MUST BE ROOTED AND HAVE A ROOTED KERNEL INSTALLED FOR THIS TO WORK! NON-AOSP ROMS ONLY!
T-Mobile rooted insecure kernel HERE
AT&T rooted insecure kernel HERE
INTRODUCTION:
I originally was building a rom that enabled serial port in an attempt to repair IMEI but decided to make a universal tool to enable the exploit instead.
You can use this new menu to access a lot of new internal settings and you can enable DIag mode (serial port) for reading and writing settings via PST.
Should work on all sgs3 phones.
DOWNLOAD:
GALAXY S III EXPLOIT TOOL
INSTRUCTIONS:
-Simply run the tool with you phone connected and follow the instructions, its a one click tool. Enjoy.
If you appreciate this and would like to make a donation you can do so here:
DONATION LINK
UPDATE:
Simple no-root solution finished for backup/restore of IMEI finished!
Thread: HERE

This video will show you the exploit being ran and a serial port being established.
Click here to watch video!
This is a big step as this enables reading the IMEI (among many other settings) via PST. Normally we can simply 'write' back whatever IMEI we want at this point; but that is not the case with this phone. When we find how to write back the IMEI, the IMEI issue will be resolved.
So,
Q: Is this a full IMEI solution?
A: No, this is me posting my work in progress along with a one click tool so that the community can help finish it up.

Thanx in advance I did bricked 2 already with no imei
Sent from my SGH-T999 using xda premium

kajam said:
Thanx in advance I did bricked 2 already with no imei
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Please submit your information HERE. It is an IMEI track/spreadsheet.

Just to clarify the special note in op, is there a difference between rooted and having a rooted kernel? I am rooted by means of Odin flashing root injected stock Rom.
Sent from my SGH-T999

Thanks for your contribution .

rakeshchn said:
Just to clarify the special note in op, is there a difference between rooted and having a rooted kernel? I am rooted by means of Odin flashing root injected stock Rom.
Sent from my SGH-T999
Click to expand...
Click to collapse
I believe so. Is this correct op?
Sent from my SGH-T999 using xda app-developers app

rakeshchn said:
Just to clarify the special note in op, is there a difference between rooted and having a rooted kernel? I am rooted by means of Odin flashing root injected stock Rom.
Sent from my SGH-T999
Click to expand...
Click to collapse
jjlean said:
I believe so. Is this correct op?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You can be rooted without an insecure kernel. Think he's saying you need an insecure kernel that will allow you to "adb remount" and get SU in adb shell.

Mi|enko said:
You can be rooted without an insecure kernel. Think he's saying you need an insecure kernel that will allow you to "adb remount" and get SU in adb shell.
Click to expand...
Click to collapse
Correct, the first command ran is (adb -d shell su -c "mount -o remount rw /system") It installs adw and then pushes a few things to system and a few thing to data, sets permissions and reboots phone. For the sake of a simple one click tool this will require the insecure kernel.

This looks cool can't wait to try it!!
Sent from my SGH-T999 using xda premium

thanx op, looks easy enough.

I ran the tool and when the phone comes back I try the Geek MOD but nothing happens. Have installed the kernel and am rooted. I'm stock GS3 other than that. Any ideas of what it doesn't work?

Anyone who's tried it yet, what exactly does this do? I'm curious....

uoY_redruM said:
Anyone who's tried it yet, what exactly does this do? I'm curious....
Click to expand...
Click to collapse
Agree. A little more info added to the OP would be appreciated.
Screenshots, maybe?

overground said:
Agree. A little more info added to the OP would be appreciated.
Screenshots, maybe?
Click to expand...
Click to collapse
haha, yeah. I'm a little reluctant to flash something in which I have NO idea what it does

Mi|enko said:
You can be rooted without an insecure kernel. Think he's saying you need an insecure kernel that will allow you to "adb remount" and get SU in adb shell.
Click to expand...
Click to collapse
you can download adbd insecure from chainfire also just sayn https://play.google.com/store/apps/...t=W251bGwsMSwxLDEsImV1LmNoYWluZmlyZS5hZGJkIl0.
---------- Post added at 08:12 PM ---------- Previous post was at 08:08 PM ----------
swehes said:
I ran the tool and when the phone comes back I try the Geek MOD but nothing happens. Have installed the kernel and am rooted. I'm stock GS3 other than that. Any ideas of what it doesn't work?
Click to expand...
Click to collapse
Same with me

Would this work on VZW? I have a "lost" IMEI, in my about device menu, my IMEI is 0. I am running on vzw right now, but it's roaming.

Cvballa3g0 said:
Would this work on VZW? I have a "lost" IMEI, in my about device menu, my IMEI is 0. I am running on vzw right now, but it's roaming.
Click to expand...
Click to collapse
Is your MEID 0's too or just the imei?

<:GeeK:> said:
Is your MEID 0's too or just the imei?
Click to expand...
Click to collapse
my meid is 11 numbers long for Dec, and Hex is 10 numbers + letters long.
I added myself to the spreadsheet.

uoY_redruM said:
Anyone who's tried it yet, what exactly does this do? I'm curious....
Click to expand...
Click to collapse
Ditto........
sent from my iPhone killer SGS3

SplashScreen change S3

Hello, i am a newbie in this forum.
i have a question!
is it possible to change the splash screen, not the bootanimation.
I am looking for a possibility to change the screen.
where can I find the file?
can someone help me?
sorry my english is not so good!
Samsung Galaxy S3 Omega Rom v3.8 / Syiah Kernel 1.89
greetings from germany

required to mod the param.lfs, pull your param.lfs here, some peoples might do it for you.

Hello,
thankyou for this information.
qvnsq said:
required to mod the param.lfs, pull your param.lfs here, some peoples might do it for you.
Click to expand...
Click to collapse
where can I find the file on your smartphone.
tool with which I can not find the file.

You need to be rooted and have an advanced knowledge level .
jje

The smartphone is rooted
the rootexplorer could not find the file
what am I doing wrong?
can you help me?
JJEgan said:
You need to be rooted and have an advanced knowledge level .jje
Click to expand...
Click to collapse

Hello,
has no interest in helping?
Is there no way to change the screen?
hatamilele said:
The smartphone is rooted
the rootexplorer could not find the file
what am I doing wrong?
can you help me?
Click to expand...
Click to collapse
greetings from germany

hatamilele said:
Hello,
has no interest in helping?
Is there no way to change the screen?
greetings from germany
Click to expand...
Click to collapse
Download Android Terminal Emulator from playstore
Code:
dd if=/dev/block/mmcblk0p4 of=/sdcard/param.lfs bs=4096
Addition Guide* Don't know if this method below will work but just give a try:
Code:
http://www.freeyourandroid.com/guide/customise_samsung_splash_screens

Hello,
I downloaded the emulator. ok.
I opened it. ok.
I entered the code. ok.
it nothing happens.
nothing is running.
there is no error message.
what's the Next Step?
qvnsq said:
Download Android Terminal Emulator from playstore
Click to expand...
Click to collapse
qvnsq said:
Code:
dd if=/dev/block/mmcblk0p4 of=/sdcard/param.lfs bs=4096
Click to expand...
Click to collapse

Try this part of his post:
http://www.freeyourandroid.com/guide/customise_samsung_splash_screens

hello,
thank you for your help.
I want to change this logo!
src="https://lh4.googleusercontent.com/-...E/AAAAAAAAAe8/cnkmZzWGsT8/s160-c/20120729.jpg"
Kryten2k35 said:
Try this part of his post:
http://www.freeyourandroid.com/guide/customise_samsung_splash_screens
Click to expand...
Click to collapse

param.lfs is not used for boot logo (although there is a copy of boot logo there) - it's already known fact long time ago.
Boot logo is inside bootloader. And since modifying bootloader is very risky with high probability of hard brick, nobody tried it (at least not in public).
Probably there is a way to tell bootloader to use logo from param.lfs. But there is no info about it yet.

That's in the bootloader. You probably don't want to mess around with it
Sent from my GT-I9300 using xda premium

Hello all,
thank you for this information.
So I will not change anything.
would not destroy my s3
param.lfs is not used for boot logo (although there is a copy of boot logo there) - it's already known fact long time ago.Boot logo is inside bootloader. And since modifying bootloader is very risky with high probability of hard brick, nobody tried it (at least not in public).Probably there is a way to tell bootloader to use logo from param.lfs. But there is no info about it yet.
Click to expand...
Click to collapse
masterex567 said:
That's in the bootloader. You probably don't want to mess around with it
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
greentings from germany

Bootloader UNLOCKED Via FreeGee FINALLY.

OK FreeGee now supports the Optimus G Pro and I unlocked my bootloader. So whats next?
EDIT: http://forum.xda-developers.com/showpost.php?p=43813711&postcount=14

wahida76 said:
OK FreeGee now supports the Optimus G Pro and I unlocked my bootloader. So whats next?
Click to expand...
Click to collapse
Wait for ROMS!!!!!!!
When the f*ck did we get ice cream??

esimon311 said:
Wait for ROMS!!!!!!!
When the f*ck did we get ice cream??
Click to expand...
Click to collapse
Cant wait

wahida76 said:
Cant wait
Click to expand...
Click to collapse
Then learn to build one or take up the art of patience. Haha.
Sent from the Professional Optimus..

jesi.james said:
Then learn to build one or take up the art of patience. Haha.
Sent from the Professional Optimus..
Click to expand...
Click to collapse
Thank you for the advice I've been waiting since the phone came out I am just saying.

wahida76 said:
Thank you for the advice I've been waiting since the phone came out I am just saying.
Click to expand...
Click to collapse
Oh I feel ya. I'm always checking up to see if there's anything new going on around. Id end up building one myself but I have no home internet and a decent enough computer
Sent from the Professional Optimus..

jesi.james said:
Oh I feel ya. I'm always checking up to see if there's anything new going on around. Id end up building one myself but I have no home internet and a decent enough computer
Sent from the Professional Optimus..
Click to expand...
Click to collapse
I would build one my self if I knew how

excuse me sir
wahida76 said:
OK FreeGee now supports the Optimus G Pro and I unlocked my bootloader. So whats next?
Click to expand...
Click to collapse
I really want to know how to boot loader unlock.. also if bootloader unlock the optimus g pro can you unlock the korea version.??

i hate to break it to you but the device isnt unlocked etc. the app says right in the description.
Optimus G Pro support is due to drjbliss and loki
https://github.com/djrbliss/loki
Click to expand...
Click to collapse
that would imply all freegee is doing is flashing a loki'd kernel/recovery. still able to do whatever you want thanks to loki but it doesnt mean the bootloader is blown open like you are thinking .

shabbypenguin said:
i hate to break it to you but the device isnt unlocked etc. the app says right in the description.
that would imply all freegee is doing is flashing a loki'd kernel/recovery. still able to do whatever you want thanks to loki but it doesnt mean the bootloader is blown open like you are thinking .
Click to expand...
Click to collapse
Thats correct just like the ATT s4, bootloader is still locked but using Loki work around. Only difference is they have roms lol

shabbypenguin said:
i hate to break it to you but the device isnt unlocked etc. the app says right in the description.
that would imply all freegee is doing is flashing a loki'd kernel/recovery. still able to do whatever you want thanks to loki but it doesnt mean the bootloader is blown open like you are thinking .
Click to expand...
Click to collapse
I read in the description it says UNLOCKS bootloader to confirm what do we do?
After using the app it said UNLOCKED and when I boot it says Device Unlock.

as it will if you boot a loki'd kernel

shabbypenguin said:
as it will if you boot a loki'd kernel
Click to expand...
Click to collapse
Any hope of now having a custom ROM Then?

shabbypenguin said:
as it will if you boot a loki'd kernel
Click to expand...
Click to collapse
I've edited the app description to clarify this. I thought I had made it clear on the xda post and at the top of the app description for giving credit to bliss. The bootloader is still very much locked, but we have this working exploit thanks to loki. What I did was just build loki into cwm, so instead of the rom dev or kernel dev having to run the loki patch on their pc, now everytime someone flashes a zip or uses adb sideload their boot and recovery partitions are checked and lokified if needed. This just automates the loki process slightly. Freegee also makes it a little easier to flash these modified recoveries and disable the wallpaper (lge security) if someone wants to stay on a stock rom but just debloat it.
So please do not misunderstand, I just re-implemented loki. Please edit he thread title to indicate it was loki.

Shelnutt2 said:
I've edited the app description to clarify this. I thought I had made it clear on the xda post and at the top of the app description for giving credit to bliss. The bootloader is still very much locked, but we have this working exploit thanks to loki. What I did was just build loki into cwm, so instead of the rom dev or kernel dev having to run the loki patch on their pc, now everytime someone flashes a zip or uses adb sideload their boot and recovery partitions are checked and lokified if needed. This just automates the loki process slightly. Freegee also makes it a little easier to flash these modified recoveries and disable the wallpaper (lge security) if someone wants to stay on a stock rom but just debloat it.
So please do not misunderstand, I just re-implemented loki. Please edit he thread title to indicate it was loki.
Click to expand...
Click to collapse
So does this mean devs can build roms without Loki patch and the recovery will do it for them?
Sent from my LG-E980 using xda premium

wahida76 said:
Any hope of now having a custom ROM Then?
Click to expand...
Click to collapse
i guess i dont understand? you guys could have had roms ages ago with 2nd init recovery. you could have had true cm ports with loki recovery. nothing has changed, there is two ways a device has development on it, either teh people who have it step forward or they find a dev who is interested.

acejoker25000 said:
So does this mean devs can build roms without Loki patch and the recovery will do it for them?
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
That is correct.

shabbypenguin said:
i guess i dont understand? you guys could have had roms ages ago with 2nd init recovery. you could have had true cm ports with loki recovery. nothing has changed, there is two ways a device has development on it, either teh people who have it step forward or they find a dev who is interested.
Click to expand...
Click to collapse
Shabby is right. We could have had roms from the get go but no one either knows or wants to build. I was in the process of learning but LIFE showed up at my door and I had to take care of that first. Now that I'm single and living alone, I could get back to being a creep that lives in a basement(literally in a basement apartment), and try to learn how to build Roms.
Shabby I have a question: Is building Roms pretty much the same for all phones? Generally speaking that is. Because I will no longer have this phone much longer.

Please Help
shabbypenguin said:
i hate to break it to you but the device isnt unlocked etc. the app says right in the description.
that would imply all freegee is doing is flashing a loki'd kernel/recovery. still able to do whatever you want thanks to loki but it doesnt mean the bootloader is blown open like you are thinking .
Click to expand...
Click to collapse
I'm sincerely sorry, I this doesn't belong here, I'm just desperate for help. I used the goomanager for the AT&T Galaxy S4 and now when I try to power on my phone it goes straight to download mode, and says could not boot normal. Can you help me please? My email is [email protected]

Jammol said:
Shabby I have a question: Is building Roms pretty much the same for all phones? Generally speaking that is. Because I will no longer have this phone much longer.
Click to expand...
Click to collapse
yes, for the most part building is building. get your build machine set up, sync a repo, edit some manifests and makefiles, configure, compile! obviously there are device specific things when you are trying to debug but the process is basically the same for any cm based rom once teamlgog has the cm bugs worked out for camera, by, etc. once our cm is pretty stable I'll start putting together some roms if someone else doesn't beat me to the punch.
if you want to put together custom roms based on stock there are a bunch of guides in various places across xda on deodexing and using the kitchen, etc to modify resources and add/remove apps and features. and if you want to play around with custom kernels, there's a thread in here to get you started. good luck!

Help Flashing CWM to E986

Can someone help me step by step flashing CWM on my E986? I searched the whole forum but they seem to complicated for me and whenever I write a post in between nobody cares, thanks for your help

I have the same problem lol, how do i flash this .img file.

CWM i flashed on my e989 by freegee automatically
Sent from my LG-E989 using Tapatalk 4

Root your phone and download Freegee from the play store and see if that'll install recovery for you.
Sent from my LG-E980 using XDA Premium 4 mobile app

Jammol said:
Root your phone and download Freegee from the play store and see if that'll install recovery for you.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
FreeGee wasn't working for E986 last time I tried. Do I have to unlock bootloader to use FreeGee app?

Today I was able to flash CM10.2 onto my E986 (orig. SW Version E98610a)
FreeGee didn't work, but I was able to flash the recovery manually (the one from the Official CM10.2 Thread) with this command (you have to be rooted to do that)
Code:
dd if=/path/to/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
after that I rebootet into recovery with no problems, made a backup and flashed CM10.2 and it worked without any problems
I hope this workes on other E986 SW Variants as well

Where do we write this code?

Via Terminal Emulator or ADB shell, but before that command, you have to enter su for root rights
Sent from my LG-E986 using xda app-developers app

SGCMarkus said:
Today I was able to flash CM10.2 onto my E986 (orig. SW Version E98610a)
FreeGee didn't work, but I was able to flash the recovery manually (the one from the Official CM10.2 Thread) with this command (you have to be rooted to do that)
Code:
dd if=/path/to/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
after that I rebootet into recovery with no problems, made a backup and flashed CM10.2 and it worked without any problems
I hope this workes on other E986 SW Variants as well
Click to expand...
Click to collapse
Sent from my LG-E986 using XDA Premium 4 mobile app

I am getting "cannot open for write: Permission denied" Do we have to substitute anything for
of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Thanks

As I wrote before, you have to enter su before that command, and grant the app (e.g. Terminal Emulator) or the ADB Shell Superuser permissions
So you have to write this:
Code:
su
dd if=/path/to/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
And of course you have to be rooted for this methode

SGCMarkus said:
Today I was able to flash CM10.2 onto my E986 (orig. SW Version E98610a)
FreeGee didn't work, but I was able to flash the recovery manually (the one from the Official CM10.2 Thread) with this command (you have to be rooted to do that)
Code:
dd if=/path/to/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
after that I rebootet into recovery with no problems, made a backup and flashed CM10.2 and it worked without any problems
I hope this workes on other E986 SW Variants as well
Click to expand...
Click to collapse
hello markus
i have read that you have the original backup data. i have the Problem that i cant install the stock Rom with lg Flash tool i get everytime an error.
can you upload the backup file anywhere ?
that would be very nice
thanks in advance
gruss

tomi001 said:
hello markus
i have read that you have the original backup data. i have the Problem that i cant install the stock Rom with lg Flash tool i get everytime an error.
can you upload the backup file anywhere ?
that would be very nice
thanks in advance
gruss
Click to expand...
Click to collapse
I don't know where you've heard that, but I totally forgot to make a backup, before I flashed CM xD
btw I have also a problem with the LG flash tool

SGCMarkus said:
I don't know where you've heard that, but I totally forgot to make a backup, before I flashed CM xD
btw I have also a problem with the LG flash tool[/QUOT
I really want to go back to stock
Msn we re so lucky
---------- Post added at 05:23 PM ---------- Previous post was at 05:20 PM ----------
SGCMarkus said:
I don't know where you've heard that, but I totally forgot to make a backup, before I flashed CM xD
btw I have also a problem with the LG flash tool
Click to expand...
Click to collapse
I really want to go back to stock
Man we are genius
Click to expand...
Click to collapse

[D680/D685/D686][4.4][BUMP] Unsecured boot.img / TWRP 2.8.7.x / Root

It's for LG G Pro Lite DUAL! You can port it to other versions if ya want.
Also the boot.img is for V20D firmware (D686 model only, install it only if You need it!)
Every boot/recovery.img needs to be BUMPED.
TWRP + unsecured boot.img
* You need to be rooted at least for the while to do it. The easiest way is to use KingRoot. You can uninstall it later and/or replace it with SuperSU.
1. Download the images and copy them to internal storage -> Google Drive
2. Turn on USB Debugging, then use Android Emulator or ADB shell to type those commands:
Code:
dd if=/sdcard/TWRP_2.8.7.x_d686.img of=/dev/recovery bs=10485760 count=1
dd if=/sdcard/unsecuredboot_d686.img of=/dev/bootimg bs=9437184 count=1
Root
1. Just flash SuperSU in TWRP.
Bugs
*everything should work
I didn't test External Storage, also I may provide sometime a AutoBUMP in TWRP so bumping the images won't be necessary.
Source: github

thanks
reas0n said:
It's for LG G Pro Lite DUAL! You can port it to other versions if ya want.
Also the boot.img is for V20D firmware. (the latest one).
Every boot/recovery.img needs to be BUMPED.
TWRP + unsecured boot.img
* You need to be rooted at least for the while to do it. The easiest way is to use KingRoot. You can uninstall it later and/or replace it with SuperSU.
1. Download the images and copy them to internal storage -> Google Drive
2. Turn on USB Debugging, then use Android Emulator or ADB shell to type those commands:
Code:
dd if=/sdcard/TWRP_2.8.7.x_d686.img of=/dev/recovery bs=10485760 count=1
dd if=/sdcard/unsecuredboot_d686.img of=/dev/bootimg bs=9437184 count=1
Root
1. Just flash SuperSU in TWRP.
Bugs
*everything should work
I didn't test External Storage, also I may provide sometime a AutoBUMP in TWRP so bumping the images won't be necessary.
Source: github
Click to expand...
Click to collapse
It works on lg d685 I installed TWRP_2.8.7.x_d686.img and unsecuredboot_d686.img with flashify without emulator and already worked

rigiton said:
It works on lg d685 I installed TWRP_2.8.7.x_d686.img and unsecuredboot_d686.img with flashify without emulator and already worked
Click to expand...
Click to collapse
Oh! It's the other variant of G Pro Lite Dual? You don't have any issues?

Confirmed working on LG D686 Build number KOT 49I.D68620d.
Beckup and Restore work on Internal and on External memory.
Many thanks for your work and i hope that the next station will be some custom ROMs.

Thanks for the TWRP Recovery and for helping me to make unsecured boot.img for V20C :good:

No problems work 100%
Sent from my LG-D685 using XDA Free mobile app

reas0n said:
Oh! It's the other variant of G Pro Lite Dual? You don't have any issues?
Click to expand...
Click to collapse
Works on KK V20A D680

Cristian Josue said:
Works on KK V20A D680
Click to expand...
Click to collapse
okay, nice one.
by the way, i think that flashing custom boot.img may not be necessary, if it will be right, then You will have less issues on other variants like D680.

Hello there,
My options navigation button is working as a home key. When I install TRWP. How can I fix? My phone D682 not dual.
Thank you.

ugur5546 said:
Hello there,
My options navigation button is working as a home key. When I install TRWP. How can I fix? My phone D682 not dual.
Thank you.
Click to expand...
Click to collapse
I got the same problem
I installed the boot image on a D680

ugur5546 said:
Hello there,
My options navigation button is working as a home key. When I install TRWP. How can I fix? My phone D682 not dual.
Thank you.
Click to expand...
Click to collapse
NoFear1795 said:
I got the same problem
I installed the boot image on a D680
Click to expand...
Click to collapse
Don't install it if You don't need to or/and it's not for Your LG variant.

Work,Awesome on my lg d686
Permission to share on my lg d686,Sir @reas0n
Thanks

tbmroysid said:
Permission to share on my lg d686,Sir @reas0n
Thanks
Click to expand...
Click to collapse
Is it the question to share it on other forums, not XDA? No problem.

Can you give stap by stap tutorial for flash cwm recovery for d686 V20C firmware
I tried but not working
My device gone two times brick when i install vai flashify app
Sent from my LG-D686 using XDA Free mobile app

mehulkarate said:
Can you give stap by stap tutorial for flash cwm recovery for d686 V20C firmware
I tried but not working
My device gone two times brick when i install vai flashify app
Sent from my LG-D686 using XDA Free mobile app
Click to expand...
Click to collapse
How I can give the tutorial for someone's work? What I have here is TWRP.

I got bricked through the flashify thing, maybe it was because I didn't Bump it?

How to bump? And which file to bump?
How to make unsecured boot.img for V20C firmware
Sent from my LG-D686 using XDA Free mobile app

I want to flash recovery on my d686 V20C firmware
Please help me
Provide me bumped recovery.img and simple method for flashing
Sent from my LG-D686 using XDA Free mobile app

I gote backup my stock recovery.img so can i install it from flashify app?
It will work or brick?
Sent from my LG-D686 using XDA Free mobile app

dan14941 said:
I got bricked through the flashify thing, maybe it was because I didn't Bump it?
Click to expand...
Click to collapse
the TWRP image is already bumped.
mehulkarate said:
How to bump? And which file to bump?
How to make unsecured boot.img for V20C firmware
Click to expand...
Click to collapse
as I said + You don't need a unsecured boot.img.