Develop Bugs

[UTIL] One Click Lag Fix

This software is currently in BETA status! This means that a lot of people have tested, and reported good results. There are still issues, but if you take note of the known issues and make sure to avoid them, you very likely will have no problems in using this fix. The worst this software should be able to do is force you to reflash your phone, by removing the battery and turning on the device with HOME+VOLDOWN+POWER + Odin and then following one of the many guides to flash a new firmware to your phone.
More questions about how this fix works? Check out the FAQ - http://forum.xda-developers.com/showpost.php?p=7620940&postcount=2
UPDATES:
There is currently a 2-3 version made by me that can be found here that has more features: http://forum.xda-developers.com/showthread.php?t=751864
Tayutama has made an update.zip version that is easy to install - http://forum.xda-developers.com/show...&postcount=208
Chainfire has a .NET version of this fix with some nice features - http://forum.xda-developers.com/showthread.php?t=751513
Ubuntu version is here: http://forum.xda-developers.com/showpost.php?p=7671640&postcount=583
[size=+2]DEPRECATED:[/size]
[size=+1]This lagfix is now marked as DEPRECATED and the following tool should probably be used in all circumstances that this one would be used in: http://forum.xda-developers.com/showthread.php?t=760571[/size]
Details about what this fix does:
Creates a VIRTUAL EXT2 filesystem inside the stock RFS filesystem on the internal SD card, with a 4KB block size. This means that this lag fix creates a buffer between the real filesystem and the android system. This buffer should reduce the amount of disk I/O required for all operations by utilizing EXT2 buffering, as well as not writing file access times to disk, etc. It allows only 1GB for application data at this stage, down from the 2GB of application data when running stock.
Folders that are currently supported:
/data/data
/data/system
/data/dalvik-cache
More folders can be added, and should help performance further.
Advantages for this fix over mimocan's fix
Does not require an external SD card.
Allows the external SD card to be removed and reinserted into the device.
Faster speed (Quadrant benchmarks of 2000+ vs 1700 for mimocan's fix)
Possible battery savings, by not requiring the external SD card to be always active.
Requirements for this fix
(Beta Release) The ability to reflash your device if something goes wrong.
Any firmware should work, including 2.2 froyo firmwares. (Tested!)
Rooted device - I used this: http://www.addictivetips.com/mobile...t-samsung-galaxy-s-i9000-with-a-single-click/
Busybox 1.17.1 from http://forum.xda-developers.com/showpost.php?p=7574130&postcount=229 -
You must have a busybox version installed that has mkfs.ext2. If unsure, install 1.17.1 from that thread!
That thread has an APK that you must sideload onto your device. Once installed, you will have a new application on your phone called "BusyBox Installer".
Run this application, and it will have a button to install busybox. Click the button, and it should install it for you!
If you have made a mistake and run this without the right busybox, there may be a solution for you! Check out this post: http://forum.xda-developers.com/showpost.php?p=7580071&postcount=187
A windows box to run the batch script. (Batch script does very little, you should be able to easily modify this to run in any enviroment.)
If you are already running mimocan's lag fix, check out this post: http://forum.xda-developers.com/showpost.php?p=7578137&postcount=85
How to run the one click fix
Place your phone into USB debugging mode: Settings->Applications->Development
Download the attached ZIP file.
Unzip to a folder of your choice.
Double click "lagfixme.bat"
Wait for it to complete.
How to remove the one click fix
Double click "unlagfixme.bat"
Wait for it to complete.
New Method for applying this lag fix
Tayutama has developed an update.zip version of this lag fix. I haven't tested it personally, but some people have had a lot of success with it. It should be more robust and less likely to cause you problems. I believe it avoids all rooting and busybox issues as well! Nice! Check out this helpful post by glockyboots for instructions. You must only use one lag fix, not both! http://forum.xda-developers.com/showpost.php?p=7587405&postcount=417
Known Issues
1) If you do not have 1GB of free space on /data, this fix won't be able to run. Looking into workarounds.
2) Script fails if your busybox does not have mkfs.ext2 - Solution is to update busybox - http://forum.xda-developers.com/showpost.php?p=7574130&postcount=229
3) Script will not work if you have previously used mimocan's fix on your current firmware. Try this to revert mimocan's fix: http://forum.xda-developers.com/showpost.php?p=7578137&postcount=85
4) Make sure your device is plugged in, and that you have the correct drivers. Permission denied errors usually mean that your device is not in USB debug mode. Settings->Applications->Development
Credits
Big thanks to mimocan for putting us all on the right track in how to sort out lag problems!
Big thanks to ykk_five for showing us all how well loopback filesystem mounting works!
Warning, this software is BETA QUALITY, and is known to function on a lot devices! You must have busybox 1.17.1 !
This doesn't meant that this won't break your phone and force you to reflash. It does mean that if you do everything properly and you read everything a few times, you very likely will have no issues!

What if im using mimocans fix. Will it work?

heman1310 said:
What if im using mimocans fix. Will it work?
Click to expand...
Click to collapse
Won't currently work with mimocans fix. I can make a slightly altered version that will work with mimocan, but if you could install mimocan, you should be able to open the .txt files and check how this is done, and do it yourself in ADB!
It seems a bit strange to have two lag fixes installed at once anyway...

Nice! Looks ok at a glance! Though I see you have changed the directory name and the loop file..

kalpik said:
Nice! Looks ok at a glance! Though I see you have changed the directory name and the loop file..
Click to expand...
Click to collapse
I based this off my script from yesterday, so it has the names I used and not the names other people used. Feel free to just edit the text files to change the names.
Important part to note is that this fix is intended (eventually when all issues have been sorted out) for people who have no idea what linux is!

RyanZA said:
I based this off my script from yesterday, so it has the names I used and not the names other people used. Feel free to just edit the text files to change the names.
Important part to note is that this fix is intended (eventually when all issues have been sorted out) for people who have no idea what linux is!
Click to expand...
Click to collapse
EXACTLY! And good job for the effort! Too bad I already applied the fix manually, so don't feel like doing it all over again. Though if you really need to test it out, let me know, ill waste another half an hour

RyanZA said:
Important part to note is that this fix is intended (eventually when all issues have been sorted out) for people who have no idea what linux is!
Click to expand...
Click to collapse
nice work RyanZA but i think it wouldn't harm people to know that they ARE in fact using linux behind that fancy ui ... this is after all a dev-forum

Great job ............. I have a question (noob).... And the device? Should I connect it to my computer at what time, and in which way the usb cable?
Have I to save or transfer some file (extracted from lagfix) for the galaxy samsung s?
Tanks.

jodue said:
nice work RyanZA but i think it wouldn't harm people to know that they ARE in fact using linux behind that fancy ui ... this is after all a dev-forum
Click to expand...
Click to collapse
you are right, but be sure there will be lots of people that want this, that eaven dont know how windows works, they just want to use it ;-)
edit: the first proof ;-)
@bucklino connect your rooted galaxy s to usb...

FadeFx said:
you are right, but be sure there will be lots of people that want this, that eaven dont know how windows works, they just want to use it ;-)
Click to expand...
Click to collapse
hehe, yeah i guess so
... i'm already looking forward to "[Q] Will the new improved one click lagg-fix make my head explode?"

jodue said:
nice work RyanZA but i think it wouldn't harm people to know that they ARE in fact using linux behind that fancy ui ... this is after all a dev-forum
Click to expand...
Click to collapse
It actually looks more like they are using DOS at this point. The fancy ui is just a little coloured text window for now. I might make this into a proper GUI at some point if I'm bored!
bucklino said:
Great job ............. I have a question (noob).... And the device? Should I connect it to my computer at what time, and in which way the usb cable?
Have I to save or transfer some file (extracted from lagfix) for the galaxy samsung s?
Tanks.
Click to expand...
Click to collapse
You don't have to do anything! That's the point!
You put your device into debug mode. Settings->Applications->Development
You plug the device in.
You double click "lagfixme.bat"
Bang!
Just gotta make sure that its rooted, and has busybox (well, it needs mkfs.ext2 included in busybox).

It worked well for me thanks

[Q] will this lag fix also fix the delivery lag of my galaxy s?
it was supposed to arrive last wednesday, today i caled the guy and he told me i get it this week... however he´s a friend of mine and i trust him. just cant wait so long...............

RyanZA said:
It actually looks more like they are using DOS at this point. The fancy ui is just a little coloured text window for now. I might make this into a proper GUI at some point if I'm bored!
You don't have to do anything! That's the point!
You put your device into debug mode. Settings->Applications->Development
You plug the device in.
You double click "lagfixme.bat"
Bang!
Just gotta make sure that its rooted, and has busybox (well, it needs mkfs.ext2 included in busybox).
Click to expand...
Click to collapse
Tanks again!!!!

FadeFx said:
[Q] will this lag fix also fix the delivery lag of my galaxy s?
it was supposed to arrive last wednesday, today i caled the guy and he told me i get it this week... however he´s a friend of mine and i trust him. just cant wait so long...............
Click to expand...
Click to collapse
hm, that sux! i had to wait about 2 weeks when i ordered my htc magic because they f***** it up. terrible 2 weeks of watching/reading reviews and crying. this time i ordered from amazon and got it 3 days later ...
good luck for your lagging problem

how to confirm tat its completed without any problem ?
it shows "
Setting up permissions
All Complete!
Script complete!
Press any key to continue . . ."
but i did a benchmark test its still 899 same as before i do this.

hq83 said:
how to confirm tat its completed without any problem ?
it shows "
Setting up permissions
All Complete!
Script complete!
Press any key to continue . . ."
but i did a benchmark test its still 899 same as before i do this.
Click to expand...
Click to collapse
have you applied any other fix previously?
have you rebooted since you applied the fix?

hq83 said:
how to confirm tat its completed without any problem ?
it shows "
Setting up permissions
All Complete!
Script complete!
Press any key to continue . . ."
but i did a benchmark test its still 899 same as before i do this.
Click to expand...
Click to collapse
Huh... hmm..
Do you still have the log window open? If you could paste the full log here I can take a look. Like I said, alpha...
Your files may be in different locations than mine, or you may not have the right busybox.

FadeFx said:
[Q] will this lag fix also fix the delivery lag of my galaxy s?
it was supposed to arrive last wednesday, today i caled the guy and he told me i get it this week... however he´s a friend of mine and i trust him. just cant wait so long...............
Click to expand...
Click to collapse
[A] If you apply this fix to the delivery/schedule systems of goods transporters, delevery times will be halved worldwide .

jodue said:
have you applied any other fix previously?
have you rebooted since you applied the fix?
Click to expand...
Click to collapse
nope.
was on JM2 without any fix.
yes did a reboot after that.

[APP] Windows Mobile SenseTimeTracker

On CodePlex I have published my app for tracking working time.
It is based on the SenseUI SDK.
SenseTimeTracker
For furter feature development either this thread can be used or the discussions in CodePlex.
After getting some feedback according to installation problems, I figured out, that the deployed .cab file does not contain the SQL Server Compact 3.5.
This has to be installed manually until I do not provide a msi-setup.
Explanation on how to install the .NET Compact Framwork 3.5 and/or the SQL Server Compact 3.5 has been added on the CodePlex page.
Version history:
Version 1.3
* Length checking of input fields
* Bug fixed with reports when first time card has date in january
* Issue with localization fixed
* Category edit form localized
* Creating new category did throw an excexption
* Default category is hidden in category list
Version 1.2
* cab file now creates a shortcut
* new version detection added
Version 1.1
* Initial release after UI redesign

Installation Procedure
Hi, Could you explain the Installation procedure, other than download and install is there any other additional requirement to get this program up and running?
Thanks

Download the cab file, copy to your mobile device and run it from there.
This shall install SenseTimeTracker on you mobile device.
Let me know if it doesn't, since it is my first publishing. I only installed it on my device or the emulator.

Test
OK! I downloaded you app, installed and found the following problem, btw I am on a Blackstone using G10 Dusk Ultimate 2 v 8.31
1) There is no icon present for your apps in the programs menu.
I went to programs found the your app and try starting it from there, I got the following error

Ok, SQL server was not deployed. I will try to fix this and provide an update.
On my devices there has been SQLCE installed, so I didn't recognize it.
Thanks for the hint.

wesch00 said:
Ok, SQL server was not deployed. I will try to fix this and provide an update.
On my devices there has been SQLCE installed, so I didn't recognize it.
Thanks for the hint.
Click to expand...
Click to collapse
No problem was glad to help, I was looking for a program like that for sometime now , I will test again when you update

You have to install the SQL Server Compact manually, sorry.
See my explanation in CodePlex.

zjxpot said:
OK! I downloaded you app, installed and found the following problem, btw I am on a Blackstone using G10 Dusk Ultimate 2 v 8.31
1) There is no icon present for your apps in the programs menu.
I went to programs found the your app and try starting it from there, I got the following error
Click to expand...
Click to collapse
wesch00 said:
You have to install the SQL Server Compact manually, sorry.
See my explanation in CodePlex.
Click to expand...
Click to collapse
Hi I downloaded and follow your instructions regarding the installation process and got the top half of the error I posted above when I tried starting the apps also no icon was installed in programs menu I tried it on G10 Ultimate 2 v8.40 release today

The icon issue I couldn't check yesterday, will do that asap. Did a lot of research how to deploy SQL Server Compact.
But could you run the app?

wesch00 said:
The icon issue I couldn't check yesterday, will do that asap. Did a lot of research how to deploy SQL Server Compact.
But could you run the app?
Click to expand...
Click to collapse
No, its not running, when I try runnunig it I get the same error box but only the top half of the message the bottom half is gone.

That makes no sense since allways an explanation of the exception is displayed.
If you installed the SQL Server Compact, can you try to delete the whole SenseTimeTracker folder in the program as well as in the documents directory (if there is one) and reinstall the cab again.
I checked this yesterday on a clean emulator and it worked. So without any further hints I cannot guess the problem.
Are you familar with developing smart device aps. Then I can send you the project for visual studio and you can try to deploy it from within VS. That shall work. Let me know.
I suggest to contact me via pm, I will help you to fix your problem.

wesch00 said:
That makes no sense since allways an explanation of the exception is displayed.
If you installed the SQL Server Compact, can you try to delete the whole SenseTimeTracker folder in the program as well as in the documents directory (if there is one) and reinstall the cab again.
I checked this yesterday on a clean emulator and it worked. So without any further hints I cannot guess the problem.
Are you familar with developing smart device aps. Then I can send you the project for visual studio and you can try to deploy it from within VS. That shall work. Let me know.
I suggest to contact me via pm, I will help you to fix your problem.
Click to expand...
Click to collapse
Hi, I flashed an orginal HD rom, installed net, sql and then your apps went to programs and started timetracker and it worked, I reflashed a cooked rom did the installation and it also worked I tried entering some information I got some error that require me to restart timetracker one of the error is attached, I will flash G10 rom again as this is my rom of choice and I will let you know how that went
I must say thanks for what I have seen so far if I get it working on G10 rom I will do some more in dept testing.
Thanks again for sharing

Ok, I see, it has nothing to do with your ROM.
I think there is a bug with the categories which only occurs on an empty/fresh database. On my tests I've had everytome a filled one, since I implemented category support later on.
I had some minutes to try it on a fresh installtion. Unfortunatly I cannot reproduce this bug. Can you plz provide more info, what in which order you entered for getting this error. I first created a user which is mandatory. Then created a client, then a project for that client and then a task for that project. Now entering a timecard did work, since the default category ("unknown") was used. The error you've got is a key violation between task and category. This should not occour, but I need to know in what order you entered the data.

wesch00 said:
Ok, I see, it has nothing to do with your ROM.
I think there is a bug with the categories which only occurs on an empty/fresh database. On my tests I've had everytome a filled one, since I implemented category support later on.
I had some minutes to try it on a fresh installtion. Unfortunatly I cannot reproduce this bug. Can you plz provide more info, what in which order you entered for getting this error. I first created a user which is mandatory. Then created a client, then a project for that client and then a task for that project. Now entering a timecard did work, since the default category ("unknown") was used. The error you've got is a key violation between task and category. This should not occour, but I need to know in what order you entered the data.
Click to expand...
Click to collapse
Sorry for not replying sooner, I was trying some other roms but no luck getting this app to work on those other roms that I flash, for me its only working on stock and Energy GTX I am presently downloading a 6.5 rom to test all others has been 6.5.x.
I have been able to reproduce the error again and again, try this
Go to category select new and create a new category everything should be ok, create another one and it should crash, also I am unable to edit the category "unknown"

More Crashes
Hi, I did some more test and I got more errors I have attach one picture, let me try to explain
1) If I try to copy the TimCard it crashes
2) TaskName is to long it crahes
I got a couple more crashes but I forgot where in the apps they occour however it seems that is not handling user input error well maybe a dialog box should appear and tell the user that the TaskName is to long or something like that I also think you should try and test if all but most of the option like copy, remove, edit, maybe it my rom related but you could still check just to be sure.

Thx again for the responses.
Couls get it allready run with the other ROMs? I have no opinion about these ROMs. I do not use any special functiuons, it is only .Net-code. The only explanation I have would be that there are problems with drawing. Bit this is done by the SenseUI framework which I cannot modify or debug.
Now to the issues.
The Category issue I could allready fix for me, will update it soon. Dont use categores for the mean while, use only "Unknow". You can change it later when it works. The "Unknow" category should not be editable, I will hide it in the next release.
The issue with the task names beeing too long is a bit more difficult to fix, I'll try to find a solution (need a common one since this will be happen with all inputs).
For the issue with copying a time card, I need a screendum of the error. I use copying of time cards allmost every day and never had problems. So it should be some special in your entries. If I have the error output, I hope to have an idea.

wesch00 said:
Thx again for the responses.
Couls get it allready run with the other ROMs? I have no opinion about these ROMs. I do not use any special functiuons, it is only .Net-code. The only explanation I have would be that there are problems with drawing. Bit this is done by the SenseUI framework which I cannot modify or debug.
Now to the issues.
The Category issue I could allready fix for me, will update it soon. Dont use categores for the mean while, use only "Unknow". You can change it later when it works. The "Unknow" category should not be editable, I will hide it in the next release.
The issue with the task names beeing too long is a bit more difficult to fix, I'll try to find a solution (need a common one since this will be happen with all inputs).
For the issue with copying a time card, I need a screendum of the error. I use copying of time cards allmost every day and never had problems. So it should be some special in your entries. If I have the error output, I hope to have an idea.
Click to expand...
Click to collapse
Hi, I have flashed back to my rom of choice as I need it for work, I also used an apps name Pocket Time, I was hoping to get your working as your is mor mordern and has more options, anyway I will be able to test your program again this weekend and I its working for me I will change my rom and start using your apps I like it.
I have attach the detail section or the Task Name error for you to look at also I have attach the error and the error detail section of G10 rom maybe from those pictures you can figrue why it dosent start
The last five is from G10
Thanks

Thx for the dumps.
As I allready wrote, the problem with the length of the description is a common problem. I did know, that it wasn't checked. I will release a new version today (1.3) which supports those checks.
The other problem has something to do with the serialisation/deserialisation of the user settings. These are stored in an XML-file in the application directory. And it seems, that the existing date time format has problems.
Is the language of your G10 ROM a different than the default ROM? I assume, you have created the XML the first time with on ROM and now trying to read it with another on. And the DateTime format of both are different and cannot be parsed.
Try to delete the xml-file in the app directory and start the app again with the G10 ROM. Let me know, if this solved the problem. May be I can then find a solution therefor. If you delete the xml-File, you will be asked for selecting a user. Select you previous eneterd user. If you navigate away from the user panel, you will be asked for the password you entered previously.
If you not allready entered sensitive data, you can send my the database (sdf-file) and the xml-file. Then I can try to debug it. I've had a lokk into the xml-file and saw there are only two time fields where the time is entered as 8:00:00 and 17:00:00. If this format is not valid on your ROM due to another culture, then this may cause the error you posted. What is the usual time format on your country?
Then I have a question according this ROM. The error occurs in Deserialize while reading a DateTime value. I have a try-parse in the deserializing section. So no exception should be thrown by the app. If there is an error in the XML file, defaults are used. I did try this on my device and ti worked that way. So I really do not know, why the exception is thrown. Ist there any special in your ROM handling exceptions?

wesch00 said:
Thx for the dumps.
As I allready wrote, the problem with the length of the description is a common problem. I did know, that it wasn't checked. I will release a new version today (1.3) which supports those checks.
The other problem has something to do with the serialisation/deserialisation of the user settings. These are stored in an XML-file in the application directory. And it seems, that the existing date time format has problems.
Is the language of your G10 ROM a different than the default ROM? I assume, you have created the XML the first time with on ROM and now trying to read it with another on. And the DateTime format of both are different and cannot be parsed.
Try to delete the xml-file in the app directory and start the app again with the G10 ROM. Let me know, if this solved the problem. May be I can then find a solution therefor. If you delete the xml-File, you will be asked for selecting a user. Select you previous eneterd user. If you navigate away from the user panel, you will be asked for the password you entered previously.
If you not allready entered sensitive data, you can send my the database (sdf-file) and the xml-file. Then I can try to debug it. I've had a lokk into the xml-file and saw there are only two time fields where the time is entered as 8:00:00 and 17:00:00. If this format is not valid on your ROM due to another culture, then this may cause the error you posted. What is the usual time format on your country?
Then I have a question according this ROM. The error occurs in Deserialize while reading a DateTime value. I have a try-parse in the deserializing section. So no exception should be thrown by the app. If there is an error in the XML file, defaults are used. I did try this on my device and ti worked that way. So I really do not know, why the exception is thrown. Ist there any special in your ROM handling exceptions?
Click to expand...
Click to collapse
Hi, I am using the original G10 WWE Ultimate 2 v8.31 rom out of the box in fact all the ROM I have tried this app on has been out of the box, will try flashing and trying your app again this weekend.
Are you using your app on an original stock rom or a cooked rom?

I'm using the app on the updated but original HTC ROM. But it did also work on the nonupdated.
The description of you exception shows me, that the problem has something to do with the localized date time format. What localizaion do you use. And I think you've got it allready running with another ROM. What localization do you have there?
What I totally do not understand, in my opinion there should not be thrown an exception, since serialization is done within a try/catch block. If there is an deserialization error, it should be catched and defaults should be used, which I have testet.

[Q] My Touch 4G themes not working

Im having a problem with my mytouch 4G. I rooted my phone the other day and all was going well, then I decided to delete some of the factory apps that I dont ever use. well.. Im guessing I deleted an app or apk. file that I needed, because now I cant change themes, when I click on "themes" it just gives me this error "Unable to find an activity to handle this action" I was thinking it might have to do with the "my modes.apk" but im a noobie at all of this so im really not to sure and im looking for help from the big dawgs.. lol... Here are some steps I have already tried taking. I tried restoring it by doing a system reset, well after doing so I realized I didnt do a backup ugh!! So.. I found the factory rom and tried flashing it so that it would install the apps. or apk. files that im missing... I thought that would be the easiest solution, just to start fresh. When I started I re-downloaded the terminal emulator so I that I could flash the factory rom, but now it wont give me "su" permissions it says "permission denied" again nothing! and noticed I didnt have the Superuser permission app. so I downloaded it off the market thinking maybe it would help but its just black like its not detecting anything. why? that this point I tried dropping the rom zip into the root and booting in reboot mode, I noticed it said wrong img. and didnt do nothing. Am doing something wrong? Other then this my phone works like a champ. Thats why I am asking if anybody can send me the "My Modes apk. file from there my touch 4G. PLZ!!! HELP!!! if you know what the heck is wrong.....these are the apk. files I deleted.
AmazonMp3 - amazonmp3.apk
App Pack - AppPack.apk
Asphalt 5 - Asphalt5.apk
Monopoly - Monopoly_Classic.apk
Quick Office - Quickoffice.apk
Rock band - rockband.apk
Screen share - TwonkyMobile_T-Mobile.apk
Stocks - Stock.apk
T-Mobile TV - T-MobileTV.apk
Talk - Talk.apk
Video chat - Qik.apk
Demo Video - TMOUS_myTouchdemo.apk
Car dock - DockPanel.apk
Mail - Mail.apk
News - HtcGreader.apk
PDF Viewer - PDFViewer.apk
My modes - ProfileManager.apk
GMail - Gmail.apk
Software info.
Android Version - 2.2.1
My Touch4G
PLZ!!! HELP!! IF YOU CAN AND THANK YOU SO SO MUCH!!

This is not the MT4G section.
Sent from my T-Mobile myTouch 3G Slide using XDA App

Sorry about that man, im a noobie lol and thanks for the heads up. I re-posted it in the 4G section.

[rom][05 apr 11][ SuperKang ROM][ext2]

F1 CyanogenMod 7 V1​
"I dont have a HTC Diamond so i dont know if it will even boot or not but have added the required files"
This is my CyanogenMod 7 build based on the latest CyanogenMod RC4 base. I have fixed a lot of bugs in this build. This build is very stable and fast.This build also includes the theme manager from which you can customize your device a lot.Don't forget that orignal CyanogenMod is in still RC4 so dont blame me for the bugs. I suggest you to open all apps and sync your account with Google on the first boot and then reboot your device for the best speed. First boot will be slow and wait up to 2-3 mins when reached on setup wizard to let Android fully settle down. This build is fully ROOTED and SuperUser is installed. In this build market, Gmail and browser will not work due to skia bug which is common in CM builds and some web based apps will not work but the system is pure stable and very fast. My the beta releases builds will be from V1 till V1.9. WiFi is better and Battery is optimized.
[Guide on how to create an EXT2 partition]
Build: CM7 RC4 [Gingerbread 2.3.3]
Kernel: Glemsom Kernel
Change log [5-4-11]
Fixed phone calling.
Fixed Neocore Textures problem.
Fixed Stock Keyboard.
Auto-rotation in display settings will be automatically disabled.
Auto-backlight in display settings will be automatically disabled.
Screen On / Off animation in CyanogenMod settings will automatically be disabled.
Fixed Gallery bug.
Added 2D Gallery.
Added Launcher Pro 0.8.4.1
Added OI File Manager 1.1.4
Removed Browser and Gmail.
Working:
SuperUser
WiFi (Perfect - No disconnection)
GPS
3G Network
3D
Phone
SMS
Very Good Battery Life
Smooth Animations
Backlight Control
Navigation
Google Maps
Not Working
Bluetooth
Due to Skia-Bug Browser, Gmail and Market are not working. (Use opera mini, its fully working)
Note:
You may also try to use SetCPU to increase battery life.
First Boot will take some time.
Don't touch the phone for 2-3 mins when reached on setup wizard.
Instructions:
Unpack the Zip file copy all the Files in the root of the FAT32 partition this will be the only partition you will see in the my computer. Then go to file explorer then in storage card then into the npkinstall folder then run haret this will install files on the EXT2 partition. Then it will automatically restart after you restart back into the windows mobile go into file explorer then storage card then run haret which is in the root of the sd-card not the one in npkinstall folder and just wait and it will boot.
Credits:
Thanks To NEOPEEK
Thanks To Chann
Thanks To XDANDROID
Thanks To Midnight
Thanks To Preston74
Download
If you want to support my work,

nice!!! sure i'll try it

screen shot?

faryaab,have you tried with other libskia and libskiaegl?

Thanks, I'll give this a try It can't hurt
Clicked INSTALL in the npkinstall folder and it soft-reset the device?
Scrap that ^^ The startup txt files don't work for Diamond (DIAM100)
See the attached rar below for working startups for diamond!

Hi, after install, the response of haret is
init: untracked pid .. (pid number +3 incremented loop)

I can't Boot My Phone With This Rom !!!

DavidTiger said:
Thanks, I'll give this a try It can't hurt
Clicked INSTALL in the npkinstall folder and it soft-reset the device?
Scrap that ^^ The startup txt files don't work for Diamond (DIAM100)
See the attached rar below for working startups for diamond!
Click to expand...
Click to collapse
Hey, thanks for the startup files Tiger! npkinstall didnt work, it just booted with your startup files. Assuming this will make it work as it should, thanks again!
Will test the rom asap, looks promising yay !
*edit* Ok so, npkinstall works just fine! Now the kernel panics when running Haret.. Havent figured out what this is causing yet... will report back.

I for some reason get a kernel panic everytime I install or boot android, however it still works and runs without problems...
I couldn't get this one to boot, after installling, and running haret. While booting it stops and loops with the message:
"request_suspend_state: wakeup(0->0) at xxxxx" and then "terminating process xxx"
Keeps looping that with incrementing numbers each time...
I'll stick to Cherry Pie V3 for now

Yep, same problem for me. Just repartitioned my external storage, and ran NPKInstall with Davids startup.txt and worked just fine. Now, when running Haret, it keeps looping with the same error Davids having.
request_suspend_state: wakeup (0->0) at xxxx,
afterwards it shows
init: untracked pid xxx exited.
The numbers keep increasing. Hope to hear from you soon!

same problem for me.
request_suspend_state: wakeup (0->0) at xxxx,
afterwards it shows
init: untracked pid xxx exited.

NanoZ said:
same problem for me.
request_suspend_state: wakeup (0->0) at xxxx,
afterwards it shows
init: untracked pid xxx exited.
Click to expand...
Click to collapse
Me too
Can any one fix this problem ?

Any updates on this, I noticed it was removed from neopeek's forum
Just need to fix the looping problem to atleast get it booted to test it out, from what I've read CM7 is pretty stable on other devices at the moment

Android ROM's threads never have screenshots Anyway, nice ROM man

meteorain08 said:
Android ROM's threads never have screenshots Anyway, nice ROM man
Click to expand...
Click to collapse
Have you got the ROM booted on the Diamond? I've tried various kernels and tweaking around with it but it always gets stuck in the loop at boot
It seems to install ok though, just not boot...

DavidTiger said:
Have you got the ROM booted on the Diamond? I've tried various kernels and tweaking around with it but it always gets stuck in the loop at boot
It seems to install ok though, just not boot...
Click to expand...
Click to collapse
I know the cause of untracked pids..
it's something in init.etc/init.gingerbread.rc

all files in init.etc are identical to another gingerbread release I compared to.
and
init.gingerbread.rc is also identical
Builds used to compare was: Gingercherry by Midnight.. I know it works on my device.

DavidTiger said:
all files in init.etc are identical to another gingerbread release I compared to.
and
init.gingerbread.rc is also identical
Builds used to compare was: Gingercherry by Midnight.. I know it works on my device.
Click to expand...
Click to collapse
oh,you used my build to compare,nice..
http://www.neopeek.com/viewtopic.php?f=24&t=6489 check here what's causing untracked pid

Touch Pro
Tried androidinstall.tar.gz from "XPERIA X1 Android Development - F1_CyanogenMod_7_V1_[EXT2]" on my Touch Pro. Anroid did startup fine.
Bug so far: XYplayer forced to close at startup.

Thanks i will try

[Q] Screenshot option in Power menu not working.

Hello, I apologize if this has been answered elsewhere. I did look / read alot of threads and did not find anything yet.
ROM:------------Juggernaut 2.0
KERNEL:---------Jugs 0.3
OC, min/max:----1080/1836 MHz
**No Tweaks / scripts**
Here is what I noticed. I held down the "power" button to get the power menu options and selected "Screenshot". The phone went back to the previous screen as if it took the screenshot. Then 2 Seconds later I got an error/message saying:
"Error: Unable to save screenshot
mBitmap = null"
Immediately another message appeared saying:
"Screenshot saved at null"
===========================================================
I've looks in my Gallery and don't see a folder called NULL, I've plugged the phone in via USB and looked through the folders trying to find it and I cant seem to locate NULL.
Do you think this could be an issue with ROM I've installed or a One user bug that can be resolved?

Much better to just post in the ROM thread as this is a specific question to the ROM.
You need to make sure the screenshot app has proper superuser permissions. Open up Superuser and make sure it's set properly. Someone had this issue earlier today and that resolved their issue.

thats exactly what it was. I wonder how it got in the Deny list. Hmmm Well its fixed not. thanks alot bud.

I wonder how to solve this problem...

Sorry for reviving this old thread but may I know what could be the possible error for this? Any error in libs or something?

aniket.lamba said:
Sorry for reviving this old thread but may I know what could be the possible error for this? Any error in libs or something?
Click to expand...
Click to collapse
Have you tried the hard key solution? (Volume Down + Power)
On another unrelated note you really shouldn't 1080mhz your min clock as your phone is never truly idle and can cause unneeded battery drain and/or excessive heat.