Hey guys
I'm looking for rom that based from the TouchWiz.
Something like the stock rom but without tmobile junk and with Hebrew support.
Thanks.
EDIT:
I don't care what version it will be.
EDENANTO said:
Hey guys
I'm looking for rom that based from the TouchWiz.
Something like the stock rom but without tmobile junk and with Hebrew support.
Thanks.
EDIT:
I don't care what version it will be.
Click to expand...
Click to collapse
You might try the standard version of Dandroid. It appears to contain DroidSansHebrew-Bold.ttf and DroidSansHebrew-Regular.ttf. If you need more, the OP contains instructions for using ROM Toolbox to add specific language support.
See my signature for the link.
RebDovid said:
You might try the standard version of Dandroid. It appears to contain DroidSansHebrew-Bold.ttf and DroidSansHebrew-Regular.ttf. If you need more, the OP contains instructions for using ROM Toolbox to add specific language support.
See my signature for the link.
Click to expand...
Click to collapse
Tnx!!
Looking great. Good vision.
But now, there is no hebrew support.
And from your word i understood i can install hebrew or something like this...
Can you guide me step by step how?
Thank !
EDENANTO said:
Tnx!!
Looking great. Good vision.
But now, there is no hebrew support.
And from your word i understood i can install hebrew or something like this...
Can you guide me step by step how?
Thank !
Click to expand...
Click to collapse
I haven't tried this myself, but the Dandroid OP includes the following:
Languages
If you need to use a specific language with Dandroid and it's unsupported you can make it work by following these easy steps
1) Go to a rom that has your desired language supported.
2) Open the app "Rom Toolbox", download from the market
3) Go to Interface, then Font Installer
4) Press the menu key, then backup all of your fonts.
5) Setup this rom, then load Rom Toolbox.
6) Restore your previous rom's fonts.
7) You should now be able to read/write in you're language
Click to expand...
Click to collapse
I understand this to mean that, if you have access to a ROM with Hebrew support, you can extract the Hebrew fonts and "restore" them into Dandroid. But as I noted in my previous post, the standard download of Dandroid appears to contain two Hebrew fonts.
Good luck.
RebDovid said:
I haven't tried this myself, but the Dandroid OP includes the following:
I understand this to mean that, if you have access to a ROM with Hebrew support, you can extract the Hebrew fonts and "restore" them into Dandroid. But as I noted in my previous post, the standard download of Dandroid appears to contain two Hebrew fonts.
Good luck.
Click to expand...
Click to collapse
Ok.
How can i find the hebrew fonts that already in the dandroid?
EDENANTO said:
Ok.
How can i find the hebrew fonts that already in the dandroid?
Click to expand...
Click to collapse
What are you trying to do? Even with LE4.12, I can see Hebrew characters on websites (using Chrome). If it's a keyboard issue, the only thing I can suggest is going into settings to see if you can select Hebrew. I also found a free Hebrew keyboard here. But it doesn't include fonts.
If you need more help than that, I'm afraid I've reached the limit of my knowledge.
If you still have a problem,
try S3Rx. It may already have Hebrew. If not, the developer seems willing to add languages on request.
S3Rx forms the base of the ROM I use. The Dandroid theme now is available as an option within the S3Rx Aroma installer.
Hey. I use Wicked ROM 10 (see our Android Development section) and I read and write in Hebrew and Arabic. Fonts are already included in the ROM for reading. For writing, simply download from the play store one of the many "soft" keyboards with multi languages OR use this cool app to add Hebrew support to the native Samsung keyboard:
https://play.google.com/store/apps/details?id=com.wanam
Let me know if you have any issues.
Sent from my SGH-T999 using xda app-developers app
Related
Hello, I've tried to download the LibSwypeCore.so and put in system/lib folder to get pt-br language into my phone, but it just wont recognize any library, neither potuguese nor english... How can i get PT-BR in my swype??
Thanks a lot
I'm running Darky's 9.3b3 and ever since I jumped on the Darky bandwagon, I've had to flash a separate Swype package everytime I wanted to upgrade the ROM to a newer version.
You might be able to find the language you're looking for following this link: http://forum.xda-developers.com/showpost.php?p=10208534&postcount=14303
You'll need Darky's ROM installed and a custom recovery to do this.
Slugbug said:
I'm running Darky's 9.3b3 and ever since I jumped on the Darky bandwagon, I've had to flash a separate Swype package everytime I wanted to upgrade the ROM to a newer version.
You might be able to find the language you're looking for following this link: http://forum.xda-developers.com/showpost.php?p=10208534&postcount=14303
You'll need a custom recovery to do this.
Click to expand...
Click to collapse
Yeah and are you sure this will work for him without a rom from Darky? Just having a custom recovery is enough?
Since :
Darkyy said:
Swype Packages for Darky's ROM...I'll post several Swype Packages here for use with my ROM.
Click to expand...
Click to collapse
and I even tried it on my STOCK rom, and after it swype was NOT there
If I didnt do backup before I would end up now without swype now. But then again I might have done something wrong
Actually i DO have darky 9.3
I'll give it a shot when i get home...
plinho_v said:
Actually i DO have darky 9.3
I'll give it a shot when i get home...
Click to expand...
Click to collapse
lol , how did he KNOW that?! Seriously... you are two secret friends and teamed up on me...
well good for you. (wont help me much though, I hoped his solution would work for me )
PAGOT said:
lol , how did he KNOW that?! Seriously... you are two secret friends and teamed up on me...
well good for you. (wont help me much though, I hoped his solution would work for me )
Click to expand...
Click to collapse
Ouch, my bad. I'll edit my post to make sure others don't fall into the same trap.
This mod will install full Arabic support on Galaxy Tabs running Overcome 3.1.0 [Kratos] (may work on earlier editions but no guarantees- try at your own risk!)
This is a CWM flashable zip and it includes a script to wipe dalvik cache after installation so all you need to do is install in CWM and reboot
We now have proper Arabic support with reading and the stock Gingerbread Arabic keyboard is also included for input support
After installing, make sure the input method is set to Samsung Keypad (default) and press the Settings key to the left of the Go key. In the next screen, tab Input Language and select Arabic then press the back key twice. You will now have an Arabic keyboard
Note: This has been tested on Overcome 3.0.0 [Kratos] but may work on others.
Please report if you get it working on other ROMs and I will add a note
Download: 004002-Overcome_v3.1.0_KRATOS_Full_Arabic_Patch.zip
thank you mkhattab its great work overcome always is best team
GreatMAX said:
thank you mkhattab its great work overcome always is best team
Click to expand...
Click to collapse
Always glad to help
Hey guys!
so I suppose this will not work if install it on the stock gingerbread (no icarus)?
kweiss10 said:
Hey guys!
so I suppose this will not work if install it on the stock gingerbread (no icarus)?
Click to expand...
Click to collapse
What ROM and base version are you using?
kweiss10 said:
Hey guys!
so I suppose this will not work if install it on the stock gingerbread (no icarus)?
Click to expand...
Click to collapse
most probably not. it is stated in the thread title.
Can we get the default status bar icons ??
I hate those ones very much, I want the original Overcome ones.
Coolman4now said:
Can we get the default status bar icons ??
I hate those ones very much, I want the original Overcome ones.
Click to expand...
Click to collapse
This mod doesn't change the icons. It is designed for Overcome Icarus 3.0 and these are the same icons of Icarus
nice work Mokhattab , is this source made by madmak ?
k0sh said:
nice work Mokhattab , is this source made by madmak ?
Click to expand...
Click to collapse
No actually the input support (keyboard) is not.
The files which enable reading and correct character shaping were made by alterbridge86 using madmack's script.
The keyboard / input patch was made by me
mkhattab said:
No actually the input support (keyboard) is not.
The files which enable reading and correct character shaping were made by alterbridge86 using madmack's script.
The keyboard / input patch was made by me
Click to expand...
Click to collapse
owh thats cool though , how many days actually toke ?
and what you edit exactly ?
maybe you can posted there in alkafi website sure ppl there will like it
Thanks dude. The Arabic keyboard works fine. Keep up the good work.
Sent from my GT-P1000 using XDA Premium App
k0sh said:
owh thats cool though , how many days actually toke ?
and what you edit exactly ?
maybe you can posted there in alkafi website sure ppl there will like it
Click to expand...
Click to collapse
It was actually quite simple and didn't take much time at all but I do not know how many firmwares this will work on as I have only tested it with Icarus.
What is alkafi?
tupo05 said:
Thanks dude. The Arabic keyboard works fine. Keep up the good work.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
I'm glad you find it useful
mkhattab said:
This mod doesn't change the icons. It is designed for Overcome Icarus 3.0 and these are the same icons of Icarus
Click to expand...
Click to collapse
I know, but since the Arabic patch will probably change the framework resources then I asked if I could get the default gingerbread icons.
Coolman4now said:
I know, but since the Arabic patch will probably change the framework resources then I asked if I could get the default gingerbread icons.
Click to expand...
Click to collapse
Ah...
Well yes. This patch does change the framework. If you want stock Gingerbread then the path I would recommend is to flash the stock theme patch, reboot at least once and then flash the arabic patch. You can get both patches from teamovercome.net in the Downloads section. I tried that combination yesterday and it works fine
Sent from my Galaxy Tab using Overcome Hermes
I am also interested in a description on how you did it.
I would like to do something similar with full japanese support. The fonts in the european rom look ugly, and the japanese keyboards in the market are not really good...
Sent from my GT-P1000 using XDA App
mkhattab said:
It was actually quite simple and didn't take much time at all but I do not know how many firmwares this will work on as I have only tested it with Icarus.
What is alkafi?
Click to expand...
Click to collapse
http://www.ce4arab.com/vb7/forumdisplay.php?f=113 check it out
areshinakya said:
I am also interested in a description on how you did it.
I would like to do something similar with full japanese support. The fonts in the european rom look ugly, and the japanese keyboards in the market are not really good...
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
To be honest it's just a matter of finding of finding, extracting, deodexing and zipaligning the keyboard from a compatible stock ROM that has the language you need. Once you are sure the files work, you can package them in a flashable zip to make it easy to apply. This will also patch the framework and other system files and that's why I stress the need for compatibility.
k0sh said:
http://www.ce4arab.com/vb7/forumdisplay.php?f=113 check it out
Click to expand...
Click to collapse
Sorry, my Arabic isn't strong enough to do that
mkhattab said:
To be honest it's just a matter of finding of finding, extracting, deodexing and zipaligning the keyboard from a compatible stock ROM that has the language you need. Once you are sure the files work, you can package them in a flashable zip to make it easy to apply. This will also patch the framework and other system files and that's why I stress the need for compatibility.
Sorry, my Arabic isn't strong enough to do that
Click to expand...
Click to collapse
how come huh!!! you are in egypt ? i thought you egyption ? ? ? ? i need explanation NOOOOW
k0sh said:
how come huh!!! you are in egypt ? i thought you egyption ? ? ? ? i need explanation NOOOOW
Click to expand...
Click to collapse
No you don't
Hi guys I have a rooted T-mobile stock firmware SGS2 T989 and want to add a cyrilic language pack on samsung keypad.
idov said:
Hi guys I have a rooted T-mobile stock firmware SGS2 T989 and want to add a cyrilic language pack on samsung keypad.
Click to expand...
Click to collapse
You should check out Juggernaut 2.5. They recently released an update that has 45 different languages on the phone. Definitely consider checking it out for the performance boosts anyways.
http://forum.xda-developers.com/showthread.php?t=1322642
I really don't like to flash new rom is there link to download just language pack and add to sdcard Thanx.
idov said:
I really don't like to flash new rom is there link to download just language pack and add to sdcard Thanx.
Click to expand...
Click to collapse
I quote AllGamer's post from another thread:
AllGamer said:
you know... you can always Extract the Chinese language APK from another ROM that includes it, and the add it to your favourite ROM, eh?
it's not that hard,
if just use Root Explorer, or simple Unzip the whole ROM in your PC then find the files you need, remember the locations
and copy them back into your phone
then set newly added file permissions to 740
it can be done with any language
Click to expand...
Click to collapse
Think you should at least root your phone..
sl___ said:
I quote AllGamer's post from another thread:
Think you should at least root your phone..
Click to expand...
Click to collapse
Do u have an idea that where would be the language file place or located at which folder?
extracting fonts
sl___ said:
I quote AllGamer's post from another thread:
Think you should at least root your phone..
Click to expand...
Click to collapse
Do you know wher ei cna find the fonts apk and how to set permissions?
This Swype is that comes with stock ROMS, This has been extracted from VillainROM 3 for SGS2, this flashable ZIP have the necesary files that Swype can work with any ROM, this also modify four props from build.prop file.
Flash this at your own responsability, and if you do it please report back.
If you have problems to boot after flash, you can restore your original build.prop with adb, if you don't know what is this, maybe you have to reconsider to flash it
NOTE: Disable signature verification before flash.
CHANGES: V0.2 Fixed to work with CM9, tested by my self.
DOWNLOAD V0.2: http://www.multiupload.com/2TFST8FOCJ
MIRROR 1: http://dl.dropbox.com/u/24981968/Swype_v0.2.zip
gracias dude! just what i was lookin' for.
How can I remove it?
celiocalves said:
How can I remove it?
Click to expand...
Click to collapse
You need to delete Swype.apk from /system/app folder and move /system/build.prop.swype file to /system/build.prop
You can do it with ADB or Root Explorer.
mcardielo said:
You need to delete Swype.apk from /system/app folder and move /system/build.prop.swype file to /system/build.prop
You can do it with ADB or Root Explorer.
Click to expand...
Click to collapse
Thanks!
Does not work with CM9 only a blue box appears after swyping
Sent from my GT-I9100 using xda premium
Sonic7 said:
Does not work with CM9 only a blue box appears after swyping
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have made some little changes, now works fine with CM9, you only have to download v0.2 and flash it again.
Thanks! Just installed this on XXLP2 and where version 0.1 didn't work, version 0.2 works perfectly
works with miui 2.1.13 - but i cant set it as the default keyboard. it always switches to the standard keyboard after restart. do you have any idea to fix it? i think it was the v1 but im not sure.
thank you.
Why should anyone install a very old version off Swype when you can get the newest for free and on every ROM from swype.com????
Sent from my GT-I9100 using xda premium
SupraN0va said:
Why should anyone install a very old version off Swype when you can get the newest for free and on every ROM from swype.com????
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
if you don't like it, don't flash it. very simple
Enviado desde mi GT-I9100 usando Tapatalk
Anyway I like much more this versión of swype against new versions, it's a preference question.
language unable to downloaded~~~~~
Anathor Mirror
Hey there. Is it possible to upload this Swype APK version on a different Mirror? this one does not work for me and i really want this old version of Swype
mirror added in first post.
mcardielo said:
mirror added in first post.
Click to expand...
Click to collapse
Thanks! but after install the zip via CWM i was unable to boot after this. Im using AndyX ROM 5.1 it's like CM 9. I dont know how i have to use ADB. Do you have another idea to solve this problem?
Just what I needed, thanks mcardielo!
SupraN0va said:
Why should anyone install a very old version off Swype when you can get the newest for free and on every ROM from swype.com????
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
This version is better for some languages other than English.
For example, the new version of Swype includes all letters from the Turkish alphabet (an additional 6 letters cramped on a small screen!), whereas this version simply uses the English QWERTY layout and predicts what I'm typing in Turkish. Therefore, this version is a lot more error-free and efficient when I'm typing in Turkish.
mcardielo said:
This Swype is that comes with stock ROMS, This has been extracted from VillainROM 3 for SGS2, this flashable ZIP have the necesary files that Swype can work with any ROM, this also modify four props from build.prop file.
Flash this at your own responsability, and if you do it please report back.
If you have problems to boot after flash, you can restore your original build.prop with adb, if you don't know what is this, maybe you have to reconsider to flash it
NOTE: Disable signature verification before flash.
CHANGES: V0.2 Fixed to work with CM9, tested by my self.
Click to expand...
Click to collapse
Hi
First of all, really nice job! Just like you and other guys around I do fancy the older version of swype.
I was wondering, though, if this stock swype was able to be ported only because of the original files extracted from VR3. Could it be possible to get, for instance, the swype version found in ICS XWLP2 to work with CM9 as well? Could you point out something like the procedure you followed for doing so? (or do it for us )
Thanks in advance
Good joob, its works on my d4rom cm9. Can you add please romanian language?
does this have pt-pt language?
Hey community
I have a little question... I've just rooted my Desire Z and flashed a Custom Rom. But now my hardware keyboard has an english dictionary. How can i change the language?
Receiver996 said:
Hey community
I have a little question... I've just rooted my Desire Z and flashed a Custom Rom. But now my hardware keyboard has an english dictionary. How can i change the language?
Click to expand...
Click to collapse
Which Rom?
On most it's usually under System Settings -> Languages and Input -> then somewhere from there.
I've flashed the LeeDrOiD Rom (It is a Sense 3 Rom).
I know that i could normally change the language there, but the only option is english...
Receiver996 said:
I've flashed the LeeDrOiD Rom (It is a Sense 3 Rom).
I know that i could normally change the language there, but the only option is english...
Click to expand...
Click to collapse
The rom was then probably only shipped with English as an option, does that rom have any sections to allow you to download more?
I didn't find anything... Isn't there a zip file from another rom, which I can use?
Receiver996 said:
I didn't find anything... Isn't there a zip file from another rom, which I can use?
Click to expand...
Click to collapse
Maybe best to ask the rom creator?
Alternatively you can download an alternative keyboard from the market (SwiftKeys3) or grab Swype Beta or so forth since most of those third party keyboards have the option to download other languages, and those dictionaries/suggestions would also apply to the hardware keyboard.