I hope someone can help me. I tried almost everything. My wave just won't boot normally. It all started when I tried to downgrade from Bada 2.0 (S8500XPKH3) to 1.2 (S8500XXJL2) and got a security port error while flashing (used Multiloader 5.65). My wave wouldn't boot up so I got someone to repair it with JTAG. Good thing it was revived. It can now go to download mode, however, i tried flashing almost all firmware versions (Bada 1.0, 1.2, 2.0) in different regions from samfirmware but to no avail.
I browsed through the forums hoping I can get an answer but I didn't see any similar case. I'm sure I'm doing the flashing right 'coz I get "All files complete." when flashing is done. Only that, every firmware that I try, it just stays in the logo screen when it starts up.
I'm looking forward for any response.
Best regards.
I guessed you have done all well. But still try this process:
1. Download a fresh, full and original firmware for your region from samMobile.com
(The firmware version does not matter, but it has to be full and for your region).
2. Make sure your battery is fully charged
3. Remove SIM and memory card from phone.
4. Ensure that all kies drivers are successfully installed.
5. Use multiLoader v5.65
6. Cross-check that your USB plug is not damaged (if possible use another one)
7. When flashing, make sure you tick the FULL DOWNLOAD option in multiLoader.
Try the above and report back. Best of luck.
yeah you should tick boot change and full download for a complete fresh installation
Good thing it was revived
Click to expand...
Click to collapse
Depend on how it was repaired via JTAG...
Maybe NV items are overwritten... this could be bad.
It is not the best idea to use Fullflash from others...
I have RIFF Box experiences...
Best Regards
P.S.:
Try to flash some Rsrc2_S8500(Mid).rc2
Maybe Bluescreen tell you what is missing...
adfree said:
Depend on how it was repaired via JTAG...
Maybe NV items are overwritten... this could be bad.
It is not the best idea to use Fullflash from others...
I have RIFF Box experiences...
Best Regards
P.S.:
Try to flash some Rsrc2_S8500(Mid).rc2
Maybe Bluescreen tell you what is missing...
Click to expand...
Click to collapse
Thanks for the tips guys. I tried the routine checking. I've also tried different a different pc. Same thing.
I'm more inclined to this adfree. NV items might be corrupted. I just know the basics of flashing.I tried several Rsrc2_s8500 (Mid) and yes I got a blue screen with details. I don't know how to interpret it myself but I remember there was IMEI not active. Will post the details later. Hope you or someone can share your thoughts.
Best regards.
I tried S8500XPKH3 again with Rsrc2_S8500(Mid).rc2 and I got this from Multiloader 5.65:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Amss 12740.3KB OK[5.0s]
Apps 26214.4KB OK[12.3s]
Rsrc1 37748.7KB OK[14.4s]
Rsrc2 2884.3KB OK[1.3s]
FFS 49217.5KB OK[111.8s]
CSC 36085.8KB OK[106.0s]
SHPAPP 203259.9KB OK[368.3s]
All files complete[638.0s]
Phone reboots and comes up with blue screen:
S/W version: S8500+XP+KH3
Modem: Q6270B-KPRBL-1.5.45t
SHP: VPP R5 2.1.1
Build Host: S1-AGENT08
Build At: 2011/08/16 20:56:16
Aoo Debug Level: 0
ASSERTION_ASSERT: 0 failed. (file SysSecureBoot.c, line 4193) BoAn4193
<Call stack information>
PC = 4000C8D3 OemDumpRegister
LR = 4000C8D7 OemDumpRegister
<Mocha Task Call stack>
_SysAssertReport
__SysSecBootReadNetLockInfoFromFile
ALL HW Information:
HW VERSION: S8500_rev07
IMEI VERSION: Not Active
RF CAL DATE: Not Active
Bad Block Information:
nNumBMPs: 0
nAge: 0
Run Time Bad Block Occurred:
Init BMPs - 2, Current BMPs = 0
Nucleus Task Information:
Running Task name - Mocha Slices = 0000001E Wait = 00000000
Signal = 00000000 Priority = 0
I've been working on this for a week now but no matter what firmware I flash, i can't get my wave to boot normally
Try qualcomm tools to activate imei
ask Adfree or use google to find the qualcomm tools program and then make your imei active using your pc.
what region was your 8500 originally?
remember that different region firmware use different boot files.
Try to use the boot files that was on your wave originally.
For some reason, it's showing "IMEI not active" when I get the blue screen after flashing with Rsrc2_S8500(Mid).rc2.
I read adfree's qualcomm tools guide and it was more on editing the product code. And, i can't access the configuration mode/hidden menu since I can't boot the phone normally.
IMEI is NV item 550 and ...
But it is secured by...
I have never tried on S8500...
Lost IMEI is enough evidence, that NV items are corrupt/missing/damaged...
I'll try to analyze your Error message...
.. will report later.
Best Regards
Edit 1...
SysSecureBoot
SysSecBootReadNetLockInfoFromFile
Click to expand...
Click to collapse
Maybe also Netlock? So maybe without IMEI Security check failes...
I think the guy who tried to resurrect my phone was using JTAG Medusa. Is there any possibility something went wrong during the process? I was just happy that the phone can go on download mode but didn't expect that whichever firmware I try, phone is just stuck on logo.
With regard to the IMEI, should i recover it, will it have a good chance to fix the problem? Can i use qualcomm tools even if the phone can only run on download mode?
if use medusa make this erase full flash after that write full from support stop writ flash in 6% in flash procedure after this flash full flash all files with boot after this pach wit z3x pachv2.Repair imei and al by ok
tested with s8500 whoo come in donload mode with 3 butons vol - lock and power
in first when try flash bada 1.0 soft after ffs write in screen see missing fota 2.0 please instal instal bada 1.2 after this
@OP:
Your SysSec data, which is closely related to NvData, has been damaged, probably by JTAG ovewrite. These data are encrypted by device-unique key.
It is possible to repair it without JTAG, through modified FOTA. But I don't think I'm the one to try this. Last time I played with that data I damaged my BL3. :\
Thanks for those who provided their insights. I kind of gave up last week and had to bring my phone to the service center. Fortunately or not, the tech had to replace the motherboard which cost around 170 USD including the "repair fee". My phone's back with a new motherboard and ready for some risky flashing again. Hehe.
Anyway, thanks again guys. Good day to y'all!
full erase flash only 6% from full after thath full flash with orginal flasher now read wit rj45 cable with z3x nvm from phone in 550 string see if imei is 359321654 need write 8a31391256 and write in phone now imei ok or select in z3x i 5500 put orginal imei and sn repair all come good and working
after all ok read full again from phone search s8500 and see you detail if need edit as your orginal string
ЄЇ~GT-S8500............їµ±№....................................TMU.....2010-06-01....АМАз±Х..................S8500BOJE7_TMOJE7...564C......9750......86210000114318......KAC007021M(S8500)...-
During my plays with RIFF JTAG and few stupid experiments with full erase I'm now facing same problem...
Strange, but this happens with my own JTAG dump...
Will see how long I need to repair this...
Best Regards
It seems no good idea to be. To erase whole NAND via JTAG...
Anyway... long time and luck... I was able to bypass Boot Cycle and then to Restore NV items via QPST...
Maybe 1 part of solution is, to use Firmware BOJE7 with Bootloader XXJEE...
Then maybe your handset start...
Now you can access menu to change to Qualcomm Diag Port for restoring NV items...
Best Regards
Hello this is maybe solution to repair xperia with only red led with QPST but we need some files MPRG8260.hex and 8260_ms image.mbn to upload and boot into sdcard mode and need copies of the devices boot loaders and partition table from the actual working device. Please help, a search on web but cant find anything
check this tool
http://forum.xda-developers.com/showthread.php?t=2173363
desperately need files.. please help
MPRG8260.hex and 8260_ms image.mbn
lukasz8504 said:
Hello this is maybe solution to repair xperia with only red led with QPST but we need some files MPRG8260.hex and 8260_ms image.mbn to upload and boot into sdcard mode and need copies of the devices boot loaders and partition table from the actual working device. Please help, a search on web but cant find anything
Click to expand...
Click to collapse
I need these files too but for me for another device ( Asus padfone A66 ( qualcomm MSM8260 )).
I searched these files for a month everywhere, but I find just died links.
Anybody have got these files?
buy a asus zenfone 2 Model ZE551ML 2GB. and I have a problem saying imei sim1 null and sim 2 works without problem I do have version SO 2.19.40.18_20150612
I need help for me.
warteiner said:
buy a asus zenfone 2 Model ZE551ML 2GB. and I have a problem saying imei sim1 null and sim 2 works without problem I do have version SO 2.19.40.18_20150612
I need help for me.
Click to expand...
Click to collapse
Return to seller.
warteiner said:
buy a asus zenfone 2 Model ZE551ML 2GB. and I have a problem saying imei sim1 null and sim 2 works without problem I do have version SO 2.19.40.18_20150612
I need help for me.
Click to expand...
Click to collapse
same condition.. imei 1 is null but 2. imei is working.. any solution..?
t-mobile_mda said:
same condition.. imei 1 is null but 2. imei is working.. any solution..?
Click to expand...
Click to collapse
restored through Root Explorer
Anyone have any ideas? I'm having the same problem here. Null on 1, fine on 2.
EcthelionIII said:
Anyone have any ideas? I'm having the same problem here. Null on 1, fine on 2.
Click to expand...
Click to collapse
have root?
I have same problem. I lost both IMEI and SN.... sim1 not working, sim2- working very well, Now my IMEIs is 004999..... And SN was 111111111, but I can fixed this, now my real SN.
Repair SN:
1. I take mmcblk0p12(this is factory partition) from other Zenfone 2, repack it via ImgExtractor.exe,
2. in mmcblk0p12/PhoneInfoDisk folder i wroted via HEX Editor my SN, mac adress, bt adress, color of device(5J)
3. Pack back via make_ext4fs.exe tooll to mmcblk0p12
4. Then I flashed this mmcblk0p12 via fastboot flash /dev/block/mmcblk0p12 mmcblk0p12
SN, mac,bluetooth adress return back
But I can't repair IMEI. i suppose it lay in config partition(mmcblk0p14), but i can't to find where..... Somebody help?
I was able to get it working with a workaround , I hope it helps u.
Go to /config/telephony/1 directory. Take backup of all files. Delete all files. Reboot phone. Check your imei.
harpreet.s said:
I was able to get it working with a workaround , I hope it helps u.
Go to /config/telephony/1 directory. Take backup of all files. Delete all files. Reboot phone. Check your imei.
Click to expand...
Click to collapse
No, it isn't work, i try this method already earlier.
null imei SIM1
same condition,, null imei sim1
muhammdridwan2007 said:
same condition,, null imei sim1
Click to expand...
Click to collapse
I found method of repair IMEI1, SIM1 became work
1. Need to flash service firmware(it working also with 550ML) https://cloud.mail.ru/public/AFCz/rNo2nbooH Attention, will be factory reset
2.Need to use Digma_SoFia_IMEI_recovery, try to find in google. I can give link, but there description on Russian language and no need to install drivers https://yadi.sk/d/30q9w4KJjvgHd For our device need to set Connection- COM, Port- Intel Android virtual COM Port
Please watch video https://www.youtube.com/watch?v=dDQ2CzoSFQE and https://www.youtube.com/watch?v=545gshHW6QQ
I faced the same problem few days ago. By flashing couple diffent roms the sim1 came back to life!
mandible11366 said:
I faced the same problem few days ago. By flashing couple diffent roms the sim1 came back to life!
Click to expand...
Click to collapse
Can you please explain about those roms and procedures in details
---------- Post added at 09:29 AM ---------- Previous post was at 09:26 AM ----------
BORETS24 said:
I found method of repair IMEI1, SIM1 became work
1. Need to flash service firmware https://cloud.mail.ru/public/AFCz/rNo2nbooH Attention, will be factory reset
2.Need to use Digma_SoFia_IMEI_recovery, try to find in google. I can give link, but there description on Russian language and no need to install drivers https://yadi.sk/d/30q9w4KJjvgHd For our device need to set Connection- COM, Port- Intel Android virtual COM Port
Click to expand...
Click to collapse
Is this tool really working for Zenfone 2 ZE550ML
I need ZE550ML service firmware??
Help me plz , I lost my imei,mac n serial
Protik said:
Can you please explain about those roms and procedures in details
---------- Post added at 09:29 AM ---------- Previous post was at 09:26 AM ----------
Is this tool really working for Zenfone 2 ZE550ML
I need ZE550ML service firmware??
Help me plz , I lost my imei,mac n serial
Click to expand...
Click to collapse
Do you have factory/PhoneInfodisk/PhoneInfo_inf file? If yes, you can recovery Serial number, wi-fi mac,bt mac by editing it with HEX editor, I not sure, you may use even text editor. If no, you should to get this file from other device. Also you should to write your Serial number to factory/PhoneInfodisk/ssn. I suppose you can try to flash this service firmware, this firmware add Virtual Serial COM Port for working Digma sofia recovery tool- thats all.
BORETS24 said:
Do you have factory/PhoneInfodisk/PhoneInfo_inf file? If yes, you can recovery Serial number, wi-fi mac,bt mac by editing it with HEX editor, I not sure, you may use even text editor. If no, you should to get this file from other device. Also you should to write your Serial number to factory/PhoneInfodisk/ssn. I suppose you can try to flash this service firmware, this firmware add Virtual Serial COM Port for working Digma sofia recovery tool- thats all.
Click to expand...
Click to collapse
Firstly thank you,
In short I say,
Mistakenly I erased all the partitions that includes
System,Factory,Config,ADF,ADP using CWM Recovery advance mode .
After that I flashed a stock rom to unbrick the phone from previous bootloops caused by FOTA update on the rooted device. After that my phone booted but no imei and info.
So I think my factory partition is empty as I formated it
And the firmware you provided is for ZE551ML 4Gb Ram variant while mine is ZE550ML 2Gb Ram.
Will flashing this work for my phone or if you can kindly provide me the Digma servicing firmware for my device!
Again thank you
Protik
There's no factory/PhoneInfodisk directory showing in root explorar
BORETS24 said:
Do you have factory/PhoneInfodisk/PhoneInfo_inf file? If yes, you can recovery Serial number, wi-fi mac,bt mac by editing it with HEX editor, I not sure, you may use even text editor. If no, you should to get this file from other device. Also you should to write your Serial number to factory/PhoneInfodisk/ssn. I suppose you can try to flash this serivice firmware, this firmware add Virtual Serial COM Port for working Digma sofia recovery tool- thats all.
Click to expand...
Click to collapse
I also need help with this sim 1 is unavailable, I have reflashed multiple ways (raw, sideload), have written in my imei, tried deleting telephony files and reboot nothing works , I dont see factory/PhoneInfodisk
Protik said:
Firstly thank you,
In short I say,
Mistakenly I erased all the partitions that includes
System,Factory,Config,ADF,ADP using CWM Recovery advance mode .
After that I flashed a stock rom to unbrick the phone from previous bootloops caused by FOTA update on the rooted device. After that my phone booted but no imei and info.
So I think my factory partition is empty as I formated it
And the firmware you provided is for ZE551ML 4Gb Ram variant while mine is ZE550ML 2Gb Ram.
Will flashing this work for my phone or if you can kindly provide me the Digma servicing firmware for my device!
Again thank you
Protik
Click to expand...
Click to collapse
Don't be afraid, you may flash service firmware from my post via asus flash tool from fastboot mode! This firmware need ONLY for activate Intel virtual COM PORT in device manager on PC, for using Phone Tool 191, no need use phone on this firmware . after repair of your imei1 you should to flash user RAW firmware for ZE550ML -that's all. For repair imei1 no need factory partition, both sim card will be become work, simple you will not have your serial number (it will be 111111) and mac addresses will be not sibling from box of phone, they will be random generated. WI-FI and BT will be work on it too
BORETS24 said:
Don't be afraid, you may flash service firmware from my post via asus flash tool from fastboot mode! This firmware need ONLY for activate Intel virtual COM PORT in device manager on PC, for using Phone Tool 191, no need use phone on this firmware . after repair of your imei1 you should to flash user RAW firmware for ZE550ML -that's all. For repair imei1 no need factory partition, both sim card will be become work, simple you will not have your serial number (it will be 111111) and mac addresses will be not sibling from box of phone, they will be random generated. WI-FI and BT will be work on it too
Click to expand...
Click to collapse
Ok thank you, I will try flashing the service firmware on my ZE550ML and then use digma to change IMEI, the pdf is in russian but seem straight forward enough in the images
BORETS24 said:
I found method of repair IMEI1, SIM1 became work
1. Need to flash service firmware https://cloud.mail.ru/public/AFCz/rNo2nbooH Attention, will be factory reset
2.Need to use Digma_SoFia_IMEI_recovery, try to find in google. I can give link, but there description on Russian language and no need to install drivers https://yadi.sk/d/30q9w4KJjvgHd For our device need to set Connection- COM, Port- Intel Android virtual COM Port
Click to expand...
Click to collapse
Perfect this ended up working on my phone (ZE550ML), flash the service file in the link using Asus Flash Tool, connect to Digma, you dont need to intall the drivers. Follow the pdf to change IMEI, use google translate it works good, remember to omit the last number in your IMEI.
I need to know how I can or where I can find this files .. ( complete the combination files )
Model : g920p
M. 6.0.1
or t bl , ap , cp , csc, and pit
I have the files.you can close the post
I spent the weekend looking for these with no luck.
hqa18 said:
I have the files.you can close the post
Click to expand...
Click to collapse
Could you point me in the right direction to find these files. My daughters phone was dead, ended up the battery flex print had been severed somehow. luckily I had another and installed it. Now it will charge, but has a blue slow-blinking light and a blank screen. No recovery, no download mode...although Odin sees it just fine. No full firmware i have tried has loaded. And the device manager on my computer is seeing it as a modem device as well as a mtp device. I have never had this problem. before. Please help!