HTC Desire HD won't boot up (rooted) - Desire HD Q&A, Help & Troubleshooting

My friend gave me HTC Desire HD (for free) saying I could keep it. It worked for about a month and then out of nowhere just stopped working.
I tried:
- Holding power button
- Holding power + volume button
- Holding power + other volume button
But nothing happens.
When I connect it to USB cable, an orange dot starts blinking on the left top of the phone and ClockWorkMod opens (note: I'm not pressing ANY button, it opens itself).
But after Clockworkmod opens, it closes before I can get to do anything. Clockworkmod is there for about 5-10 seconds and then the phone shuts back down and I need to reconnect it to usb cable again to show clockworkmod again, or sometimes the clockworkmod shows itself back again for no reason.
I tried doing some stuff like installing rom from sdcard, but clockwork mod closes before I can even choose any option, or even if I do get to choose it, the screen turns black again in the middle of the operation.
I sadly don't have any other info on the phone at the moment because my friend isn't available, All I can tell is that the ClockworkMod is version v5.0.2.7 and it says "Ace hack kit" with blue font in the middle of the screen.
I need the phone for development purposes so it would be really great if someone could help me fix it, any idea what could be wrong? thank you!
EDIT: I also have no information on which ROM was on that phone and if it is really rooter or not (but since there is ClockworkMod on it I'm almost sure it was rooted, I don't know much about that stuff though so I can't say anything

whizslo said:
I tried:
- Holding power button
- Holding power + volume button
- Holding power + other volume button
But nothing happens.
When I connect it to USB cable, an orange dot starts blinking on the left top of the phone and ClockWorkMod opens (note: I'm not pressing ANY button, it opens itself).
Click to expand...
Click to collapse
Can you get to fastboot if you hold down vol down while you plug it in (from completely off)? This would help to get some more info on the phone status.

Related

[Q] I have flashed chinese MIUI Desire_2.4.13 ROM

I have registered my account to ask this question. I have been flashing roms since I bought desire a month ago. But this time I flashed the chinese version of MIUI rom from their official website. They didn't even mentioned on their site that this is Chinese and official version of the rom.
My question is, how can I connect my USB cable to connect to the computer and then copy some other rom to my memory card. ( I don't have memory card reader/adapter). I tried to connect it but it's showing charging icon on the status bar, I then tap on that icon and there were some on/off options I tried to change them in both states but the device is still not connecting to the computer in USB mode. I am bit afraid because I am experiencing this strange problem that I haven't found fix on the net.
P.S: Sorry for my English and please reply urgently I can't even use my phone with this chinese version.
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
ser.clansman said:
Why don't you just go to recovery (just power off phone and then while holding volume down press and hold power) and mount sdcard from there?
Click to expand...
Click to collapse
I have to connect my phone with pc, so I can put another rom on the sd card and then flash it. Is it possible to do this via recovery? If yes please guide me how do this.
Thanks
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
ser.clansman said:
Yes, it is possible... Like i said, turn off your phone (if you're not sure how take the battery out and put it back again), then while holding the volume down button on the side of the phone press and hold power button... Phone should turn on, screen should be white with phone info on the top and Norad skating at the bottom of the screen - this is called bootloader... After several seconds some check-ups should be done and you should be able to move through menu by pressing volume up and down... Navigate to recovery and press power button to select it... Now the screen should change and you should be taken to recovery whichever you have installed... From there you can either restore a nandroid backup if you previously made it or toggle usb/mount usb or whatever it says and while in that menu connecting phone you should be able to access sdcard... if there is something you can't follow ask...
Click to expand...
Click to collapse
Thank you so much, I use the option Mount USB storage and put my rom on the card and I have finally come back to some English rom. Thanks it worked.

Need Help! Only displays lit black screen!

Hey I have an evo that was running madwoz jb rom. like a dummy I try to put it to stock using older ruu. it went through setup and said it was finished. now my evo only turns on to a lit black screen. vibrates once with power button with black lit screen. with power plus vol down it doesn't vibrate just lit black screen. thought it was total brick. but when I press vol down and power I can press up or down a couple time and press power and either restart phone or I think enter recovery but with black lit screen. I say that because when plugged to usb and messing with buttons pressing vol and power after it shows on device manager. also adb devices will recognizes the evo but it has recovery beside the serial number instead of device. in this state I cant even read and copy files through adb. but phone stays blank. I really need help. I have no clue what to do.
carolinateejay said:
Hey I have an evo that was running madwoz jb rom. like a dummy I try to put it to stock using older ruu. it went through setup and said it was finished. now my evo only turns on to a lit black screen. vibrates once with power button with black lit screen. with power plus vol down it doesn't vibrate just lit black screen. thought it was total brick. but when I press vol down and power I can press up or down a couple time and press power and either restart phone or I think enter recovery but with black lit screen. I say that because when plugged to usb and messing with buttons pressing vol and power after it shows on device manager. also adb devices will recognizes the evo but it has recovery beside the serial number instead of device. in this state I cant even read and copy files through adb. but phone stays blank. I really need help. I have no clue what to do.
Click to expand...
Click to collapse
Only thing I can think of is putting the stock pc36img.zip file on the sd root folder and trying to get into hboot. If you still cant see the screen check you tube on evo hboot and then at least you can see if you need to hit up or down to confirm installation.

Tried flashing Viper and now can't get to fastboot menu!

I tried flashing ViperOneM8 1.8.0 (ViperOneM8 1.7.1 -> 1.8.0) which I guess was the wrong thing (I think that was an update, should have started with 1.7.1 first). Anyway... Now my M8 boots to some type of android base OS without a lot of things...
1) It's not possible to get to settings as there is no settings app in the app drawer.
2) There is no title bar/task bar at the top. The area that holds the time, and a few icons at the top is gone.
3) There is no background.
4) There is no way to get on the WiFi do to #1 and because of this I can not add my google account. That in turn means no google play store access.
But the BIGGEST thing of all... I CAN NOT BOOT TO FASTBOOT!!!
- Power the device off.
- Hold the volume down button (also tried the volume up button) + press power usually boots strait to fastboot mode.
I THINK it has something to do with the fact that by default in the settings I need to untick the fastboot option in the dev options.. Well I can't get to settings. Now what?
arvo.bowen said:
I tried flashing ViperOneM8 1.8.0 (ViperOneM8 1.7.1 -> 1.8.0) which I guess was the wrong thing (I think that was an update, should have started with 1.7.1 first). Anyway... Now my M8 boots to some type of android base OS without a lot of things...
1) It's not possible to get to settings as there is no settings app in the app drawer.
2) There is no title bar/task bar at the top. The area that holds the time, and a few icons at the top is gone.
3) There is no background.
4) There is no way to get on the WiFi do to #1 and because of this I can not add my google account. That in turn means no google play store access.
But the BIGGEST thing of all... I CAN NOT BOOT TO FASTBOOT!!!
- Power the device off.
- Hold the volume down button (also tried the volume up button) + press power usually boots strait to fastboot mode.
I THINK it has something to do with the fact that by default in the settings I need to untick the fastboot option in the dev options.. Well I can't get to settings. Now what?
Click to expand...
Click to collapse
Shut down phone.
Turn it on
Hold volume up+power button until it restarts
As soon as you get the black screen for restart release power button and hold volume down.
If your timing is right you will enter bootloader.
I tried it and it definitely works
Flash your nandroid or any rom you know was ok to begin with and you are up and running!!!
stathis95194 said:
Shut down phone.
Turn it on
Hold volume up+power button until it restarts
As soon as you get the black screen for restart release power button and hold volume down.
If your timing is right you will enter bootloader.
I tried it and it definitely works
Flash your nandroid or any rom you know was ok to begin with and you are up and running!!!
Click to expand...
Click to collapse
Tried that...
1) Powered off device.
2) Held power button for about 2 seconds until it came on then let go.
3) IMMEDIATELY I pressed and held down the power and volume up buttons.
4) The phone continues to boot up a little bit longer and gets to the verizon check (verizon splash screen) then shortly after goes black (as expected).
5) IMMEDIATELY let go of power button continuing to hold volume up button.
... .. .. .
6) I get the white screen that says HTC (powered by android)... NOT a bootloader screen as expected.
Update... When I try to click on the app drawer then top right click the little three dots, I try and "Manage Apps" ... ERROR "App isn't installed"...
:/
arvo.bowen said:
Update... When I try to click on the app drawer then top right click the little three dots, I try and "Manage Apps" ... ERROR "App isn't installed"...
:/
Click to expand...
Click to collapse
If you connect the phone to the computer, can you get fastboot or adb to recognize the phone?
If so, you can try adb reboot bootloader command or fastboot reboot bootloader comand
arvo.bowen said:
Tried that...
1) Powered off device.
2) Held power button for about 2 seconds until it came on then let go.
3) IMMEDIATELY I pressed and held down the power and volume up buttons.
4) The phone continues to boot up a little bit longer and gets to the verizon check (verizon splash screen) then shortly after goes black (as expected).
5) IMMEDIATELY let go of power button continuing to hold volume up button.
... .. .. .
6) I get the white screen that says HTC (powered by android)... NOT a bootloader screen as expected.
Click to expand...
Click to collapse
After 4 you release power button and press volume DOWN.
This will get you to the bootloader
stathis95194 said:
After 4 you release power button and press volume DOWN.
This will get you to the bootloader
Click to expand...
Click to collapse
Yea, I ended up doing the following...
1) While device is powered on, Press and hold Volume Up + Power until device reboots.
2) When it starts to reboot continue holding the Power button and change to the Volume Down.
That worked for me.

Stuck at bootloader unlocked warning

I have TWRP and LineageOS with Magisk installed on my A50. Normally, when my phone boots, I get the following sequence:
1. Phone vibrates.
2. Samsung Logo appears for a very short time, with bootloader unlocked warning at the bottom.
3. A screen showing a bootloader unlock warning at the top and "PRESS POWER KEY TO CONTINUE" appears.
4. After a while or if you press the power key, an additional unofficial software warning appears in red letters at the bottom.
5. After some time the phone continues to boot normally.
My problem is that after the latest reboot ("reboot into recovery" via power menu), it gets stuck at step 4 and won't continue to boot, neither recovery nor system, even if I wait for tens of minutes.
What I've tried:
-reboot with volume +/-/poweroff
-reboot with volume volume -/poweroff
-all of the following with and without USB connected to PC:
-power/volume +/- at boot, both starting after logo screen as well as starting before logo screen, as well as releasing power at logo screen
-power/volume + at boot, both starting after logo screen as well as starting before logo screen, as well as releasing power at logo screen
-power/volume - at boot, both starting after logo screen as well as starting before logo screen, as well as releasing power at logo screen
-volume + at boot, both starting after logo screen as well as starting before logo screen
-volume - at boot, both starting after logo screen as well as starting before logo screen
-volume +/- at boot, both starting after logo screen as well as starting before logo screen
None of these helped. I just get the normal sequence 1-4 and then stuck every damn time. Can't get into recovery or download mode. Can't even power off, obviously.
Is my phone gone for good?
same **** here. for me i cant charge the battery too. but before that with about the same problems i got it to work again for a few days.
now hangs on step 4
wollert60 said:
same **** here. for me i cant charge the battery too. but before that with about the same problems i got it to work again for a few days.
now hangs on step 4
Click to expand...
Click to collapse
With some help I managed to get into download mode, and from there reflash stock rom with ODIN.
Basically, you need to reboot the phone with power/vol+/vol- and as soon as the screen goes black, you release power but keep pressing the volume buttons, and also immediately connect the USB cable with the PC. Timing is key.
otterwise said:
With some help I managed to get into download mode, and from there reflash stock rom with ODIN.
Basically, you need to reboot the phone with power/vol+/vol- and as soon as the screen goes black, you release power but keep pressing the volume buttons, and also immediately connect the USB cable with the PC. Timing is key.
Click to expand...
Click to collapse
thats rng af. I also accidentally managed to flash another rom over it. it starts and could be set up again. but this is the second time why I had to do the whole thing
otterwise said:
With some help I managed to get into download mode, and from there reflash stock rom with ODIN.
Basically, you need to reboot the phone with power/vol+/vol- and as soon as the screen goes black, you release power but keep pressing the volume buttons, and also immediately connect the USB cable with the PC. Timing is key.
Click to expand...
Click to collapse
bro, you helped me alot, i'm stucked at this screen maybe 2 hours I didnt know what to do.
Btw, I've it just in 1 time =))
I got a way easier Method which has saved me several times
Is something i came up myself
Il be as precise as i can be so everyone understands!
1.Plug the phone to the wall (Your charger to the outlet)
2. Hold Power And Volume - (Volume down) until the phone shows the second charging animation (Which is the one after the first image of the phone charging [A circle with the lightning icon in the middle], this second screen shows a charging animation and the percentage of the battery) This indicates that the phone is fully Turned Off
3. Unplug your phone and the charger off the wall and bring it to your computer
4. Plug your cable to your Computer then back on your phone Hold Volume + and Volume - (Volume up and Volume Down) and plug your phone to your computer WHILE HOLDING BOTH VOLUME BUTTONS.
This little trick will put your phone in download mode so you can restore your device using Odin OR Flash Twrp with Odin and boot to right into Twrp (There is a way to do it without turning the phone on and having to go back to step 1, Follow this Tutorial to do it
(
)
I Hope this helps you all
And Happy Flashing!

Question Why wont my S22 go into Download mode or recovery mode?

So I have spent hours now looking around for an answer the phone is find my phone locked and I can't remember my pin code. I have done all the tricks with the combination keys.
The usual way to get into Recovery mode is Hold V+ and power until the phone vibrates and you should be in recovery mode release the keys. (Doesn't work)
Iv read that you should have the USB cable connected from pc/laptop while you do the same holding V+ and power button... (doesn't work ether)
and download mode should be very easy just hold V+ and V- plug USB cable from pc/laptop and you should get into download mode by pressing V+. Will only show charging Icon and that's its.
So is it possible to turn off this modes from the manufactor? Or is this a completely new security future? How can you use odin? How can you wipe the cache? If you end up having some issues.
Im going nuts....
No way to get into fastboot ether. So if anyone know why this is happening to me or got any solution I would appreciate it.
Plug in your cable with the phone turned on. Hit Power Off and wait for the phone to fully turn off. The charging logo will show up so let the animation do its thing. After maybe 20 seconds, press Volume up + Power and keep them pressed until you boot to recovery. If the command wasn't recorded in the first place and the phone is still off after more than 15 seconds, let go of the buttons and press them again and keep them pressed until it boots in Recovery
dragos281993 said:
Plug in your cable with the phone turned on. Hit Power Off and wait for the phone to fully turn off. The charging logo will show up so let the animation do its thing. After maybe 20 seconds, press Volume up + Power and keep them pressed until you boot to recovery. If the command wasn't recorded in the first place and the phone is still off after more than 15 seconds, let go of the buttons and press them again and keep them pressed until it boots in Recovery
Click to expand...
Click to collapse
It will not work. How the hell should I be able to cle3ar cache if I got a boot loop ??? They can't just turn off recovery mode mand download mode??? This is so strange even paying for a frp reset but not even he does know what wrong??? Can they turn off fastboot, recovery mode and Download mode on this new phones? Is it because its locked with find my phone? 1 week researching now. It will only vibrate. And my PC cant find my phone anymore worked fine 30min ago nothing has changed... So annoying never seen this happened before every combination with buttons to get in any mode doesn't work only vibrates and go to pin lock screen...
Take it to a Samsung Experience center at best buy. Or send it into Samsung for repair.
download mode:
Turn off phone
plug cable in pc but not in phone
pres "volume +" and "volume -" in the same time
plug cable in phone
recovery mode:
plug cable in pc and s22
power off
press "volume +" and power
wait until see recovery mode
starciti said:
download mode:
Turn off phone
plug cable in pc but not in phone
pres "volume +" and "volume -" in the same time
plug cable in phone
recovery mode:
plug cable in pc and s22
power off
press "volume +" and power
wait until see recovery mode
Click to expand...
Click to collapse
thats a solid advice assuming his bootloader/recovery/download mode is fully functional then this advice works, in his case and in mine too it does not work and trying to get to the root of the problem is the key. In my case recovery mode gives error on screen so it may have to do with the way firmware is installed as these modes are not accessible.
have you sorted it out? Its nearly a year onwards =)
CrispShadow19 said:
thats a solid advice assuming his bootloader/recovery/download mode is fully functional then this advice works, in his case and in mine too it does not work and trying to get to the root of the problem is the key. In my case recovery mode gives error on screen so it may have to do with the way firmware is installed as these modes are not accessible.
Click to expand...
Click to collapse
This, at index 2:48 minutes.
It needs to be connected to the PC. Another screwy quirk Samsung added recently. Your button timing/sequence matters as well.
On my N10+'s you can go into recovery directly with a restart if you do it right. Otherwise they will puke on you.

Categories

Resources