[[SPRINT]]
So my dad trashed his E4GT by dunking it in a river. Then dropped it at work cracking the screen. Gave him my old one. Had a hell of a time getting it programmed to his line, but I got it. eventually had to flash the One-Click Stock (JB) odin to fix an issue where he could not connect to WiFi. After that, flashed Dirty Unicorn, and all was good. Or so we thought (we were in range of an Airave). Seemed he no longer had any reception off of the Airave. After much searching it seemed possibly due to the fact that the phone refused to leave WCDMA mode. Long story short, I fixed the issue by starting back on Stock Rooted (JB), getting fresh PRL and Profile after wiping EVERYTHING i could find, and then flashed back to DU. He was totally fine for two weeks. Now all of a sudden he again has no signal off of the Airave. He is in a bad reception area, but when it is working properly he gets enough to call, text, browse a bit, etc. But when it is acting up like this, he cant do anything at all off of Wifi and/or Airave.
TL;DR
Going from stock rooted JB to JB Dirty Unicorn, would that cause modem issues (being that the stock rooted most likely has a JB modem, and you arent supposed to use JB modems on JB Dirty Unicorn)?
faaaaq said:
[[SPRINT]]
So my dad trashed his E4GT by dunking it in a river. Then dropped it at work cracking the screen. Gave him my old one. Had a hell of a time getting it programmed to his line, but I got it. eventually had to flash the One-Click Stock (JB) odin to fix an issue where he could not connect to WiFi. After that, flashed Dirty Unicorn, and all was good. Or so we thought (we were in range of an Airave). Seemed he no longer had any reception off of the Airave. After much searching it seemed possibly due to the fact that the phone refused to leave WCDMA mode. Long story short, I fixed the issue by starting back on Stock Rooted (JB), getting fresh PRL and Profile after wiping EVERYTHING i could find, and then flashed back to DU. He was totally fine for two weeks. Now all of a sudden he again has no signal off of the Airave. He is in a bad reception area, but when it is working properly he gets enough to call, text, browse a bit, etc. But when it is acting up like this, he cant do anything at all off of Wifi and/or Airave.
TL;DR
Going from stock rooted JB to JB Dirty Unicorn, would that cause modem issues (being that the stock rooted most likely has a JB modem, and you arent supposed to use JB modems on JB Dirty Unicorn)?
Click to expand...
Click to collapse
ICS modem for DU..pretty much all aosp ROMs ( ICS to jb )..the latest ICS modem is FL24. Flash that modem or another ICS modem on the phone. Then do the temp boot to upgrade prl and profile.. If you're on stock again you can flash the modem and update the prl and profile.. Then flash DU.. Making the move to DU shouldn't have messed up the modem..if you did the above..
Gil81 said:
ICS modem for DU..pretty much all aosp ROMs ( ICS to jb )..the latest ICS modem is FL24
Click to expand...
Click to collapse
Yes, i know that. But his phone worked fine for 2 weeks so I wasnt sure if that was the culprit. I have some time before I will have an opportunity to *try* to walk him thru flashing an ICS radio himself >.> so I figured Id ask
faaaaq said:
Yes, i know that. But his phone worked fine for 2 weeks so I wasnt sure if that was the culprit. I have some time before I will have an opportunity to *try* to walk him thru flashing an ICS radio himself >.> so I figured Id ask
Click to expand...
Click to collapse
I added to my post above...if you did this process then I'm not sure.. I hadn't heard anything about du messing up.. But I'll look around.. Maybe a new update or something..
Gil81 said:
I added to my post above...if you did this process then I'm not sure.. I hadn't heard anything about du messing up.. But I'll look around.. Maybe a new update or something..
Click to expand...
Click to collapse
No I hadn't flashed an ICS modem. Everything you said the first time was correct. I went straight from JB Stock to DU. Spaced out on the modem because I was in a rush to get everything working. And when it actually did work fine for 2 weeks and now stopped, it threw me off.
I am going to see if tomorrow I can walk him thru the One-click to install FL24
faaaaq said:
No I hadn't flashed an ICS modem. Everything you said the first time was correct. I went straight from JB Stock to DU. Spaced out on the modem because I was in a rush to get everything working. And when it actually did work fine for 2 weeks and now stopped, it threw me off.
I am going to see if tomorrow I can walk him thru the One-click to install FL24
Click to expand...
Click to collapse
No need for a one-click.. Just have him download an ICS modem from rwilcos repo..( zip format ) and then boot to recovery and wipe cache and dalvik cache. Then flash the modem.. Next time you have a moment you can do the temp boot to update prl/profile
Gil81 said:
No need for a one-click.. Just have him download an ICS modem from rwilcos repo..( zip format ) and then boot to recovery and wipe cache and dalvik cache. Then flash the modem.. Next time you have a moment you can do the temp boot to update prl/profile
Click to expand...
Click to collapse
The One-click is nice and simple though. The less steps the better, my dad isnt exactly a whiz with current tech. I already have both downloaded on my laptop in case he doesnt have the confidence to do it himself
faaaaq said:
The One-click is nice and simple though. The less steps the better, my dad isnt exactly a whiz with current tech. I already have both downloaded on my laptop in case he doesnt have the confidence to do it himself
Click to expand...
Click to collapse
You the boss.. But there is no way..hooking you're phone to a computer is easier than flashing one zip file from you're phones own recovery.. In my opinion.. Less steps my way , too. If you need any help with flashing a modem from a phone or you're dad does. Just hit me up. I'd be glad to help.. I finally have my dad texting and my mom on a rooted huawei ascend 2..although I did all the heavy lifting for her,she's starting to get it..lol.
Gil81 said:
You the boss.. But there is no way..hooking you're phone to a computer is easier than flashing one zip file from you're phones own recovery.. In my opinion.. Less steps my way , too. If you need any help with flashing a modem from a phone or you're dad does. Just hit me up. I'd be glad to help.. I finally have my dad texting and my mom on a rooted huawei ascend 2..although I did all the heavy lifting for her,she's starting to get it..lol.
Click to expand...
Click to collapse
Just ran thru installing the ICS modem. No change. Cant update the PRL or Profile on DU of course, though. Updating the PRL and/or Profile necessary for any change to take effect?
Also JFYI, yes I know what it will take to update them, just wondering if having not done that yet is what would be causing there to still be a lack of signal
faaaaq said:
Just ran thru installing the ICS modem. No change. Cant update the PRL or Profile on DU of course, though. Updating the PRL and/or Profile necessary for any change to take effect?
Also JFYI, yes I know what it will take to update them, just wondering if having not done that yet is what would be causing there to still be a lack oignal
Click to expand...
Click to collapse
This is where I'm not sure, everybody says to update..but I have went without,but I did notice my signal bouncing around..... But I'm in a very good signal area.. I would say an update can't hurt...FYI...I get the best signal on gb27.. On touchwiz...of course. There are some good tw Roms out lately..too. You could always go back to stock to see if its the rom/modem..Then work back to cm/aosp or tw... This signal stuff is funny to mess with..what works for one might not for the next.. I can't remember what carrier you have but a signal repeater might be a choice..
Gil81 said:
This is where I'm not sure, everybody says to update..but I have went without,but I did notice my signal bouncing around..... But I'm in a very good signal area.. I would say an update can't hurt...FYI...I get the best signal on gb27.. On touchwiz...of course. There are some good tw Roms out lately..too. You could always go back to stock to see if its the rom/modem..Then work back to cm/aosp or tw... This signal stuff is funny to mess with..what works for one might not for the next.. I can't remember what carrier you have but a signal repeater might be a choice..
Click to expand...
Click to collapse
Sprint. He has gotten signal where he is before in DU (and that was with a JB modem, no less) for two weeks. It was low signal, but it was signal no less. Our only option is to get the phone working normal, a repeater will not do as he has no signal at his house, at his job, or anywhere within approx 60 miles of where he lives. Normally he has low signal, but atm he has zero. I am currently waiting for his download of a Stock Rooted rom to finish so we can flash that (which I know for sure will give him signal) then flash the ICS radio, update PRL and Profile, and then try DU again. If that does not work I will just have to have him stick to the Stock Rooted JB rom, since we know he gets signal on that.
faaaaq said:
Sprint. He has gotten signal where he is before in DU (and that was with a JB modem, no less) for two weeks. It was low signal, but it was signal no less. Our only option is to get the phone working normal, a repeater will not do as he has no signal at his house, at his job, or anywhere within approx 60 miles of where he lives. Normally he has low signal, but atm he has zero. I am currently waiting for his download of a Stock Rooted rom to finish so we can flash that (which I know for sure will give him signal) then flash the ICS radio, update PRL and Profile, and then try DU again. If that does not work I will just have to have him stick to the Stock Rooted JB rom, since we know he gets signal on that.
Click to expand...
Click to collapse
Sounds like you have a plan..hope it works for ya.. if ya run into any problems don't hesitate to ask..
Related
*Bad english ahead*
The problem is that my phone seems to refuse to get any service at all. The signal icon just shows a big "X" and it is stuck in "Searching for service".
Phone status shows that the Signal strenght is on -79 dBm, so i guess the anthena is working just fine. But below Service Sate it just shows "Out of service".
Im using a EB13 Modem with the SyndicateROM.
In fact, the phone was working just fine with MidnightROM until i flashed the SyndicateROM over.
Already tried reverting it to Stock rom and nothin, any suggestions?
Did you try reflashing (Just) the modem through ODIN?
Let me try...
Does this one should work? (The odin one)
http://forum.xda-developers.com/showthread.php?t=963774&highlight=modem.tar
Here is a direct download link
Click Me!
Did you flash your Epic to Telcel? If so, that process might be causing you some problems. After using Odin to get back to stock, install CWM3 then SRF1.0.1, then once you're stable there, try the carrier flash again.
063_XOBX said:
Here is a direct download link
Click Me!
Click to expand...
Click to collapse
Thanks but it didn't work. Still stuck with no service.
Did you flash your Epic to Telcel? If so, that process might be causing you some problems. After using Odin to get back to stock, install CWM3 then SRF1.0.1, then once you're stable there, try the carrier flash again.
Click to expand...
Click to collapse
What do you mean by "Flashing my epic to telcel" and that "Carrier flash?" is on Iusacell, since Telcel dont support CDMA.
And one last thing, what is SFR1.0.1?
EDIT:
Im reverting back to DI18 Stock rom with odin to see if i can do something.
Homeroe said:
What do you mean by "Flashing my epic to telcel" and that "Carrier flash?" is on Iusacell, since Telcel dont support CDMA.
And one last thing, what is SFR1.0.1?
Click to expand...
Click to collapse
Oh okay - the banner under your username says Telcel, so I figured they were it. I thought I'd read they support CDMA but I was mistaken.
SRF1.0.1 is SyndicateROM Frozen 1.0.1.
On the flash, let me rephrase - did you do anything special to get the Epic to work on Iusacell, or did it work there out of the box?
That's the reason then. You can't change ROMs if you're on a carrier other than Sprint, it will revert your phone back to Sprint.
k0nane said:
Oh okay - the banner under your username says Telcel, so I figured they were it. I thought I'd read they support CDMA but I was mistaken.
SRF1.0.1 is SyndicateROM Frozen 1.0.1.
On the flash, let me rephrase - did you do anything special to get the Epic to work on Iusacell, or did it work there out of the box?
Click to expand...
Click to collapse
Nope, the phone was working just fine out of the box. It had signal (Roaming) and all.
I even flashed like 3 roms before Syndicate and it was working just fine. Was just yesterday that i decided to try this ROM out and got the problem.
Homeroe said:
Nope, the phone was working just fine out of the box. It had signal (Roaming) and all.
I even flashed like 3 roms before Syndicate and it was working just fine. Was just yesterday that i decided to try this ROM out and got the problem.
Click to expand...
Click to collapse
I'm not entirely sure what to tell you - there's nothing in SRF that should/will/can cause any problems of that sort. Going back to full stock via Odin didn't help?
I followed this guide: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700 to return to Stock rom, but i can't get this thing working
Im pretty much lost as well.
EDIT:
Oh god what the... I was just messing around with the phone. Turned on the Flight mode. Made a Factory reset via Privacy setting, Rebooted the phone, turned off the a Flight mode and suddenly had signal again.
I dont know what happened, since i tried the factory reset before with no luck... But well, im glad its working now. Thank you to both of you for the help anyways.
I have a similar problem as the OP, and I'm pretty sure it's ClockworkMod that's causing it.
Seems like every other time I do something in CWM, I get no service and an unknown Baseband and Hardware version in the phone's settings.
So far the only reliable way I've found of fixing it is to Odin all the way back to DI18 and start fresh.
For some reason Odining the modem or EB13 doesn't work (I still get no service).
And I must say, it's incredibly frustrating.
I guess I'll just have to get SRF flashed and never touch CWM again (because doing so almost always breaks my phone).
I'd like to be able to make Nandroid backups though, but unfortunately, doing so breaks the modem (which really doesn't make any sense).
Ok so I have a Telus model and this started a few days ago when I flashed an AOKP rom...
So, I don't get LTE in my area and have always had 4G (or whatever they say it is).. Ive flashed many TW roms and ALL the roms have displayed 4g...and for not having lte, ive been very impressed with the speeds.
However, since this AOKP rom I installed (which was awesome, just wanted to go back to TW), it displayed H+...
Now, I know what h/h+ is and all that jazz about the carriers.. My issue is, can't flash any TW rom now without getting 3g/h/h+ toggling back and forth nonstop and the speeds are horrible!!! Can barely download in the store and loading a page takes a while.....and yes, I realize that its supposed to help with battery and whatnot but I don't like it and just want 4G back!!! lol
So far, I can only get 4g back when I unroot and do a hard factory reset...
And even then, it still shows h/H+ until I go through all the system updates.... then, I go to install another TW rom and I'm back with the h/h+ again...
I have tried the att fix, installing latest modem and still no luck.
I even asked to do a factory reset on my fathers phone (we are on the same family plan) and his shows 4g even when installing any TW rom...
Does anyone out there know what I did wrong?? also, my imei number is fine..
Thanks in advance to any advice or help
spenny88 said:
Ok so I have a Telus model and this started a few days ago when I flashed an AOKP rom...
So, I don't get LTE in my area and have always had 4G (or whatever they say it is).. Ive flashed many TW roms and ALL the roms have displayed 4g...and for not having lte, ive been very impressed with the speeds.
However, since this AOKP rom I installed (which was awesome, just wanted to go back to TW), it displayed H+...
Now, I know what h/h+ is and all that jazz about the carriers.. My issue is, can't flash any TW rom now without getting 3g/h/h+ toggling back and forth nonstop and the speeds are horrible!!! Can barely download in the store and loading a page takes a while.....and yes, I realize that its supposed to help with battery and whatnot but I don't like it and just want 4G back!!! lol
So far, I can only get 4g back when I unroot and do a hard factory reset...
And even then, it still shows h/H+ until I go through all the system updates.... then, I go to install another TW rom and I'm back with the h/h+ again...
I have tried the att fix, installing latest modem and still no luck.
I even asked to do a factory reset on my fathers phone (we are on the same family plan) and his shows 4g even when installing any TW rom...
Does anyone out there know what I did wrong?? also, my imei number is fine..
Thanks in advance to any advice or help
Click to expand...
Click to collapse
Verified the APN settings, and the Network Mode is LTE / GSM / WCDMA?
Craptain Krunch said:
Verified the APN settings, and the Network Mode is LTE / GSM / WCDMA?
Click to expand...
Click to collapse
Yes apn checks out just and on LTE/GSM/WCDMA.
Its weird becase my father has the exact same settings. And again, showing his 4g.
As I type this, im on 3g and when I send, it will turn to h+. Speed is horrible
spenny88 said:
Yes apn checks out just and on LTE/GSM/WCDMA.
Its weird becase my father has the exact same settings. And again, showing his 4g.
As I type this, im on 3g and when I send, it will turn to h+. Speed is horrible
Click to expand...
Click to collapse
So it constantly switches between 3g, H, and H+ ? Have you downloaded a network signal app to see what kind of signal you are getting and strong it really is ?
When you say you have done a complete unroot and factory reset, what method are you using ? Is this where to flash an unrooted stock firmware from lets say Sam Mobile and then done a factory reset ? Or are you just doing another type of unroot ? When you root what method are you using ?
You stated you are on a Telus model but flashed an at&t modem ? Are you on AT&T service ?
hednik said:
So it constantly switches between 3g, H, and H+ ? Have you downloaded a network signal app to see what kind of signal you are getting and strong it really is ?
When you say you have done a complete unroot and factory reset, what method are you using ? Is this where to flash an unrooted stock firmware from lets say Sam Mobile and then done a factory reset ? Or are you just doing another type of unroot ? When you root what method are you using ?
You stated you are on a Telus model but flashed an at&t modem ? Are you on AT&T service ?
Click to expand...
Click to collapse
Getting 5753kbps download and 905kbps upload .
Whereas before my kbps were always around 11-12000kbps for the download speeds.
I always flash back to stock rom using odin and then factory reset.
Oh sorry if I stated that wrong. I tried an att fix as well as flashing the most recent modem for my telus device but both fixes did nothing.
Again tho, ive done this so many times with TW roms and cant figure it out..
Im currently trying to go back to stock and use the most recent CWM to flash and see if that helps
spenny88 said:
Getting 5753kbps download and 905kbps upload .
Whereas before my kbps were always around 11-12000kbps for the download speeds.
I always flash back to stock rom using odin and then factory reset.
Oh sorry if I stated that wrong. I tried an att fix as well as flashing the most recent modem for my telus device but both fixes did nothing.
Again tho, ive done this so many times with TW roms and cant figure it out..
Im currently trying to go back to stock and use the most recent CWM to flash and see if that helps
Click to expand...
Click to collapse
It doesn't seem to make sense that even after going back to stock unrooted 4.0.4 (or what ever it cmae with from the factory) you still have signal problems as the odin packages would flash the correct modem once you install.
Sounds like network issues.
Speeds of ~9000kb are actually pretty standard for actual usage with H+/H/3G. Don't worry about speed too much. And for future reference 4G is H+, its just another name for it. The common misconception is that 4G is LTE which it is not.
aeppacher said:
Speeds of ~9000kb are actually pretty standard for actual usage with H+/H/3G. Don't worry about speed too much. And for future reference 4G is H+, its just another name for it. The common misconception is that 4G is LTE which it is not.
Click to expand...
Click to collapse
Thank you for your reply.. yes I know what it means and its pretty cool. But again, my father and I are on the same plan, with telus with same phones. Going back to stock rom with odin still shows h/h+ when it should show 4g. I kniw they are the same, but the fast dormacy is a pain in the rear. My father and I are currently running the same rom with the same service getting 4g on his and h/h+ on mine
hednik said:
It doesn't seem to make sense that even after going back to stock unrooted 4.0.4 (or what ever it cmae with from the factory) you still have signal problems as the odin packages would flash the correct modem once you install.
Click to expand...
Click to collapse
No kidding!! Ive done this a thousand times and have never seen it before..so starting to grt frustrated when told that its normal lol..
So when I get to 4.0.4 its still h/h+, but when I update the first time from samsung, it then shows 4g and my speeds are back to normal. But then as soon as I flash afyer rooting, it gies right back to h/h+ fast dormacy with no way of going back unless i do a hard factory reset again.
spenny88 said:
Thank you for your reply.. yes I know what it means and its pretty cool. But again, my father and I are on the same plan, with telus with same phones. Going back to stock rom with odin still shows h/h+ when it should show 4g. I kniw they are the same, but the fast dormacy is a pain in the rear. My father and I are currently running the same rom with the same service getting 4g on his and h/h+ on mine
Click to expand...
Click to collapse
Are you sure it is the exact same version that you are running? He didn't update at all, no matter how small the update? If you flash from odin, everything that you did in the past should be overwritten. Go to settings->about phone and tell me what both of your baseband/build versions are
aeppacher said:
Are you sure it is the exact same version that you are running? He didn't update at all, no matter how small the update? If you flash from odin, everything that you did in the past should be overwritten. Go to settings->about phone and tell me what both of your baseband/build versions are
Click to expand...
Click to collapse
Ok so the baseband is I747MVLDLK4 and build version is 2.4? lol
I will unroot and flash back to 4.0.4 with a factory reset and then update this post.
Really appreciate ur help
Btw.. I downloaded the whole odin/telus stock tar md5 and recovery about a year ago and have been using that for both of our phones. I will update in a coupke of hours
Also, when I flash back to stock and get the 4g back is there a way to save the modem and/or other files needed to bring over to another rom?
Ok so here is the image I took of my phone info..
I would have to put my fathers back to stock to see if there are the same... but Im now on 4.0.4 with h/h+ still present. Im gonna do a hard factory reset to get the 4G back and then see about trying other things.
spenny88 said:
Ok so the baseband is I747MVLDLK4 and build version is 2.4? lol
I will unroot and flash back to 4.0.4 with a factory reset and then update this post.
Really appreciate ur help
Btw.. I downloaded the whole odin/telus stock tar md5 and recovery about a year ago and have been using that for both of our phones. I will update in a coupke of hours
Also, when I flash back to stock and get the 4g back is there a way to save the modem and/or other files needed to bring over to another rom?
Click to expand...
Click to collapse
TW ROMs display H+ as 4g, and LTE as 4g LTE
AOSP ROMS display H+ as H+ and LTE as 4g
Craptain Krunch said:
TW ROMs display H+ as 4g, and LTE as 4g LTE
AOSP ROMS display H+ as H+ and LTE as 4g
Click to expand...
Click to collapse
Yes, this I understand... but with the 4G displaying, I get NO fast dormancy causing download issues and on top of that, my download speeds are 11-12000kbps.. when showing h/h+, Im getting half the speeds and constant toggling from 3g/h/h+ is driving me up the wall!!
again, Ive never seen this on my Telus TW roms..
I will be unrooting and going back to stock with odin...then doing a factory reset..it will still show the h/h+ unless I do 1 of 2 things....either do a hard factory reset using *2767*3855#, or by simply doing a Samsung update...then after one of those, 4G will be back and so will my speeds.
spenny88 said:
Yes, this I understand... but with the 4G displaying, I get NO fast dormancy causing download issues and on top of that, my download speeds are 11-12000kbps.. when showing h/h+, Im getting half the speeds and constant toggling from 3g/h/h+ is driving me up the wall!!
again, Ive never seen this on my Telus TW roms..
I will be unrooting and going back to stock with odin...then doing a factory reset..it will still show the h/h+ unless I do 1 of 2 things....either do a hard factory reset using *2767*3855#, or by simply doing a Samsung update...then after one of those, 4G will be back and so will my speeds.
Click to expand...
Click to collapse
general rule of thumb, touchwiz roms cannot be built from source. The only way to mess with these roms is with winzipping and adding apps (i call it bloatware) to be honest, if you want customization go to AOSP. Every single time I use a touchwiz rom no matter how smooth its says it is, I get crashes, bugs, irreversible issues like you have, loss of connectivity, the list goes on. Thats all because of the limitations of not having source code, I would recommend you drop the touchjizz and find an AOSP rom you like, if not, stock rom is the way to go.
aeppacher said:
general rule of thumb, touchwiz roms cannot be built from source. The only way to mess with these roms is with winzipping and adding apps (i call it bloatware) to be honest, if you want customization go to AOSP. Every single time I use a touchwiz rom no matter how smooth its says it is, I get crashes, bugs, irreversible issues like you have, loss of connectivity, the list goes on. Thats all because of the limitations of not having source code, I would recommend you drop the touchjizz and find an AOSP rom you like, if not, stock rom is the way to go.
Click to expand...
Click to collapse
Its cool to prefer something but spouting BS doesn't really make your case convincing.
Sent from my SAMSUNG-SGH-I747 using xda premium
hednik said:
Its cool to prefer something but spouting BS doesn't really make your case convincing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I agree.. I'm under the impression its the other way around.
Hey just curious.. I was reading about going back to stock and making a copy of the qcn??
Can anyone confirm that copying this and then injecting it after a flash would work?
hednik said:
Its cool to prefer something but spouting BS doesn't really make your case convincing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
what did I say that is a spout of BS?
spenny88 said:
Hey just curious.. I was reading about going back to stock and making a copy of the qcn??
Can anyone confirm that copying this and then injecting it after a flash would work?
Click to expand...
Click to collapse
Unless your imei is lost I wouldn't mess with anything involving it unless you have to.
aeppacher said:
what did I say that is a spout of BS?
Click to expand...
Click to collapse
That your opinion is somehow fact. That somehow using a TW rom will just give you bugs and ruin your phone, as if a custom rom doesn't have glaring bugs as well. It's quite awesome the amount of customization that the dev's on the touchwiz rom's are able to inject into their rom's. Anyonr who thinks it's just unzipping files and adding apk's is uninformed. Is it on the level of PA or AOKP of course not but with more customization you add the possibility and almost the certainty that you have bugs and instability. We are quite spoiled on the i747 that we have kt and Task developing rock solid custom rom's. Most out there don't have that pleasure. If a TW rom on here is unstable it's because the dev has fallen short some where. I'd say I fall in this category and I am certainly no dev, just a noob cook. Equating TW rom's from 2.2 to the ones we have now is just fallacy. I do agree not having the source code put's dev's on the
In general I have had to deal with more bugs and instability with custom rom's than I have with a stock based rom (stock meaning what came on the phone). Yet that is not a gripe but merely the fact that I don't like to deal with the little things that pop up on custom rom's, and I prefer the aesthetics of TW. Crazy I know as many find it ugly.
At first I thought it was the ROM, but I flashed 4 different roms and still the same problem. Every time someone calls me it drops my signal, all my bars go away and whoever called me cannot hear me. Idk how to fix this :/
Robdizz said:
At first I thought it was the ROM, but I flashed 4 different roms and still the same problem. Every time someone calls me it drops my signal, all my bars go away and whoever called me cannot hear me. Idk how to fix this :/
Click to expand...
Click to collapse
4.4 seems to require at least the 4.3 modem baseband, you need to flash it via Odin. Be careful on the version, note the one already installed and chek which one is the normal upgrade. My m919v only worked with it's specific modem.
There's a few topic about this. Can't post link but look for this one: [ONLY FOR MDL BOOTLOADER] How to use 4.3 MK2 Modem and Retain Sound
Okay so I just returned to stock because I couldn't fix the problem .. so now i'm running android 4.2 and my wifi wont connect. Keeps giving me this when I try to turn on Wifi
I've tried all sorts of roms, AOSP and Sense, they all stay connected to 4g for a few minutes at most after a reboot and then go back to 3g.
Everything else works fine, and my sim works good in other phones and stays on 4G.
Any idea what this could be or what is causing this?
Have you updated to the latest firmware? If your using kitkat roms, you need kitkat firmware. You can find the firmware in the second post of santods stock rom thread in development. Use the no boot.img one.
cmlusco said:
Have you updaTed to the latest firmware? If your using kitkat roms, you need kitkat firmware. You can find the firmware in the second post of santods stock rom thread in development. Use the no boot.img one.
Click to expand...
Click to collapse
Yea I've flashed those also. Everything used to work fine until that roaming display issue. Never returned to normal for me, even tho roaming is gone.
Have you ever ruu'd back to stock and then done a factory reset from hboot? That is the only way to wipe out the network settings and force them to be updated. Worth a try i guess.
cmlusco said:
Have you ever ruu'd back to stock and then done a factory reset from hboot? That is the only way to wipe out the network settings and force them to be updated. Worth a try i guess.
Click to expand...
Click to collapse
I guess that's my only option, thought maybe I'd be able to avoid it.
I'll try tomorrow and update.
Tried to ruu back to stock yesterday and still getting the same results. No 4g after a few minutes.
Sent from my HTC6500LVW using Tapatalk
Dethsesh said:
Tried to ruu back to stock yesterday and still getting the same results. No 4g after a few minutes.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
I'm not getting 4g at all on my phone. I came here to post a question and saw yours, so thought posting another thread would be pointless.
I've got NusenseSIX RC4.5 running and while the 4g icon comes on, there's no data transfer at all. I flashed the new firmware first, as instructed, and that seemed to go just fine according to the directions. But, when I swapped my sim card from my other One and waited a few minutes, even *228'ed, no data.
I got the phone already rooted and s-offed with TWRP 2.7.0.1. How do I get it back to stock to clear out the network settings? Or could it be a bad firmwware flash, so I'm screwed anyway?
EDIT: I redid everything, and just stuck with the Sense 5.5 mostly stock ROM. Data works now. Might've been firmware, might've been the ROM on my phone. Zero idea.
Is it possible to have a bad sim?
I just got a replacement device and I still cannot get 4G service for more than about 2 minutes before it switches to 3G
Souldrifter said:
I'm not getting 4g at all on my phone. I came here to post a question and saw yours, so thought posting another thread would be pointless.
I've got NusenseSIX RC4.5 running and while the 4g icon comes on, there's no data transfer at all. I flashed the new firmware first, as instructed, and that seemed to go just fine according to the directions. But, when I swapped my sim card from my other One and waited a few minutes, even *228'ed, no data.
I got the phone already rooted and s-offed with TWRP 2.7.0.1. How do I get it back to stock to clear out the network settings? Or could it be a bad firmwware flash, so I'm screwed anyway?
EDIT: I redid everything, and just stuck with the Sense 5.5 mostly stock ROM. Data works now. Might've been firmware, might've been the ROM on my phone. Zero idea.
Click to expand...
Click to collapse
Dethsesh said:
Is it possible to have a bad sim?
I just got a replacement device and I still cannot get 4G service for more than about 2 minutes before it switches to 3G
Click to expand...
Click to collapse
Sure, you can have a bad SIM, but I don't think that'd cause the drop in data transfer rate... lack of data all together, or other things not working, sure, but if you can actually catch a 4G link and then it drops to 3G, sounds more like the radios, the hardware, or just a bad coverage area. I'm no expert, though.
In case anyone was wondering, I ended up getting a new SIM and that has fixed my 4G issue. No idea what was wrong with the SIM, but anyway it sucked.
I've got the T-Mobile M919 S4 and I have a 4.4.4 ROM on it (Insane Hybrid).
I've got the latest NK2 Baseband and I also don't want to upgrade to Lollipop since I did before and it was lag lag lag lag lag after a week or so.
I've noticed recently that it is getting very poor reception.
My buddy's S3 will have two bars and mine will show no service. Or it'll have bars but no data service. Or I won't be able to call out.
There also seems to be an unusual amount of spots where I have no service.
When I do have service, the data can get really really slow.
My GPS lock also frequently gets lost during navigation.
Any ideas? Do I need to flash a kernal, modem, or radio or something? Which ones?
fuzzybabybunny said:
I've got the T-Mobile M919 S4 and I have a 4.4.4 ROM on it (Insane Hybrid).
I've got the latest NK2 Baseband and I also don't want to upgrade to Lollipop since I did before and it was lag lag lag lag lag after a week or so.
I've noticed recently that it is getting very poor reception.
My buddy's S3 will have two bars and mine will show no service. Or it'll have bars but no data service. Or I won't be able to call out.
There also seems to be an unusual amount of spots where I have no service.
When I do have service, the data can get really really slow.
My GPS lock also frequently gets lost during navigation.
Any ideas? Do I need to flash a kernal, modem, or radio or something? Which ones?
Click to expand...
Click to collapse
Try updating your baseband. That sometimes solves it. Here's the link:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Saturny said:
Try updating your baseband. That sometimes solves it. Here's the link:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Click to expand...
Click to collapse
Thanks, I'll give those a shot. I'm going to flash this and see what happens:
http://forum.xda-developers.com/gal...stock-base-4-4-4-nk2-rooted-deodexed-t2990478
I'm still a bit confused on some of the terminology and what's bundled with what.
- The "modem" is the same as the "radio", right? It's a driver that controls how the device deals with cellular voice and data signals. I can find the version of my modem/radio by looking at the last letters in my "baseband."
- The modem/radio driver is usually bundled with a ROM, right? So the ROM that I flashed above will also update/replace my current modem/radio driver?
- Modem/radio drivers can be separate from the ROM itself. If I use a 4.4.4 rom that has NK2 bundled, I can still flash just a NH4 radio using ODIN onto the old ROM and be ok, right?
- Where does the kernal come in? I'm assuming the kernel is bundled with the ROM and the kernal is only in charge of the switching between cellular and WiFi data, right?
That's the price you pay with custom roms, sometimes your lucky and everything works the way it's supposed to sometimes it doesn't.
Run phone for a day and make sure everything works properly after flashing back to stock before attempting custom again.
If you need your device to function as a reliable phone, making and receiving calls and messages you may have to rely on stock roms.
Pp.
fuzzybabybunny said:
Thanks, I'll give those a shot. I'm going to flash this and see what happens:
http://forum.xda-developers.com/gal...stock-base-4-4-4-nk2-rooted-deodexed-t2990478
I'm still a bit confused on some of the terminology and what's bundled with what.
- The "modem" is the same as the "radio", right? It's a driver that controls how the device deals with cellular voice and data signals. I can find the version of my modem/radio by looking at the last letters in my "baseband."
- The modem/radio driver is usually bundled with a ROM, right? So the ROM that I flashed above will also update/replace my current modem/radio driver?
- Modem/radio drivers can be separate from the ROM itself. If I use a 4.4.4 rom that has NK2 bundled, I can still flash just a NH4 radio using ODIN onto the old ROM and be ok, right?
- Where does the kernal come in? I'm assuming the kernel is bundled with the ROM and the kernal is only in charge of the switching between cellular and WiFi data, right?
Click to expand...
Click to collapse
This. Would anyone please answer the above questions above as I am also looking for some answers to the questions above?