Related
ello guys.
i need help regarding installing back the stock rom on my One x . i bought the second hand phone few days back and its already unlocked and rooted with Android Revolution HD 18.0 custom rom running , somehow the phone is quiet unstable and rom crashes too often especially on restarting it displays the message "unfortunately process.com.android stoped working" or something like that. and it displays the same kind of message for every app when i try to open any app. i tried factory resets many time but to no aval.
pls guide me about the problem that this phone is having secondly pls tell me the correct Stock RUU for reverting back to the stock rom which i hope would solve the problem.
my phone's detail :
ENDEAVORU pvt ship S-ON
HBOOT 1.31.0000
CPLD none
MICROP none
Radio 5.1204.162.29
eMMC boot mode : disabled
CPU boot mode: disabled
HW secure boot : enabled
modem path : off
its CID is 11111111 ( i think its unbranded)
VERSION-MAIN : 3.14.401.619
i ve following queries
1. do i need to downgrade the hboot to install stock rom
2. how many digits of the version-main number should match with the RUU ... like i ve found one like (RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed (1).exe)
is it ok for my device???
3. anyother especial precaution i should take before attempting this procedure
thanks
To get CID, try
fastboot oem readcid
The RUU you posted is the latest for '401, I'm not sure why your build number of 619 is newer. Anyway that RUU comes with hboot 1.39 so it should install, although you may need to flash that firmware manually before the RUU.
Thanks for guiding me. I didn't understand what I need to flash manually before installing RUU? Plz elaborate as m noob to all these things.
Sent from my EndeavorU using xda app-developers app
To run a ruu you only have to lock the bootloader, you don't have to flash anything
Just put the phone in fastboot usb mode and do the command from the fadtboot folder on pc
Fastboot oem lock
After that leave the phone in fastboot usb mode and run the ruu from pc WITH admin rights !
If it fails you have to flash the firmware first like Ben said
I ve just reconfirmed the cid, its 11111111
I think its not carier locked as there is NO logo of any companies.
Sent from my EndeavorU using xda app-developers app
Thanks Mr Hofs
Plz tell me the RUU that I mentioned in first post is okay for my device?
N what does it mean to flash firmware manually before installing RUU?
Sent from my HTC one x using xda app-developers app
Well it might have to do something with the supercid you have ! But i think the ruu will work fine, charge the batt to full if you can. Always the best to start with a full batt so if you run into an error its easy to fix.....
Somewhere I read that unbranded phone when they are unlocked they show their cid like this one.
Ok I should now relock the bootloader with commands in fastboot and straightaway go to install this RUU? Is this a logical sequence now for me?
Sent from my EndeavorU using xda app-developers app
Yes just like i posted earlier ..... The ruu flashes back the stock recovery and boot.img.....
In case of failure like you said I need to flash firmware manually before installing RUU. What does that mean? Plz pardon me if its a stupid question as I am new at all this stuff.
Sent from my EndeavorU using xda app-developers app
Well that's Mr Pope's expertise if i am not mistaken, but if i get it right you have to flash a European 1.39 hboot firmware and after that the ruu again. But i think that it is not necessary, the only way we find out is to try
More i read greater are confusions
Do I need to extract stock recovery and stock boot.img from RUU and flash them before actually running RUU. As earlier mentioned steps are supposed to be done before re-locking and RUU has to be installed after re-locking.?
Sent from my EndeavorU using xda app-developers app
No just relock the bootloader and run the ruu from pc WITH admin rights and with the phone in fastboot usb mode
Ok thanks Mr Hofs I ll give it a try and let you know.
Sent from my EndeavorU using xda app-developers app
i went through like you suggested , ist relocked the bootloader than ran RUU one which is mentioned in my ist post ,, it started doing it initially ,,
erased the previus rom etc ,, than started sending data and finally after about 4 to 5 mins messaged appeared that the rom cant be updated pls choose correct one for this phone.
now i have relocked phone stuck at the bootloader and i dont know what to do ... pllllzzzzz help
First lets get a working phone back !
Unlock the bootloader
Fastboot flash unlocktoken unlock_code.bin
Flash the custom recovery back and flash a custom rom. Then at least you have a working phone. When i get home later this evening i can search more for a solution......
Maybe in the mean time you can find something on supercid with the search option ! :thumbup:
bsam46 said:
i went through like you suggested , ist relocked the bootloader than ran RUU one which is mentioned in my ist post ,, it started doing it initially ,,
erased the previus rom etc ,, than started sending data and finally after about 4 to 5 mins messaged appeared that the rom cant be updated pls choose correct one for this phone.
now i have relocked phone stuck at the bootloader and i dont know what to do ... pllllzzzzz help
Click to expand...
Click to collapse
plllsssss hhhhheeeelllppppp
bsam46 said:
plllsssss hhhhheeeelllppppp
Click to expand...
Click to collapse
Did you read my post, please stay calm. The phone is not bricked ......
Mr Hofs said:
Did you read my post, please stay calm. The phone is not bricked ......
Click to expand...
Click to collapse
Sorry m so nervous i didnt see your post. the problem is i dont have custom rom on the internal storage is there anyway to get phone back in working condition no mater what rom is running
Yes you can mount the sdcard within the custom recovery as a usb disk ! Mount it and copy over the desired Rom :thumbup:
my phone (htc one x) version is for hong kong cid:622
right now im in Android_Revolution_HD-One_X_18.0 rom and I want to come back to stock
I have RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Rad io_5.1204.162.29_release_299865_signed file and I relock my phone and start run this ruu file and everything alright but when program start to check my phone version give error for phone version but im 100% sure that version of software and phone is same.
when my phone in orginal rom, ota update exactly come with this version and that time also have same problem and have error in phone version
any one have an idea? I really need to come back in orginal software
fastboot getvar version-main
And the actual error message please.
BenPope said:
fastboot getvar version-main
And the actual error message please.
Click to expand...
Click to collapse
2.17.708.7
uturn2316 said:
my phone (htc one x) version is for hong kong cid:622
right now im in Android_Revolution_HD-One_X_18.0 rom and I want to come back to stock
I have RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Rad io_5.1204.162.29_release_299865_signed file and I relock my phone and start run this ruu file and everything alright but when program start to check my phone version give error for phone version but im 100% sure that version of software and phone is same.
when my phone in orginal rom, ota update exactly come with this version and that time also have same problem and have error in phone version
any one have an idea? I really need to come back in orginal software
Click to expand...
Click to collapse
Can you please upload it?
I cant find this ruu.
Would be regretful...
you must first install the original boot.img + original recovery.img and then relock your bootloader , And try ...
samooorje said:
you must first install the original boot.img + original recovery.img and then relock your bootloader , And try ...
Click to expand...
Click to collapse
This information is false. Youonly need to relock bootloader.
TToivanen said:
This information is false. Youonly need to relock bootloader.
Click to expand...
Click to collapse
I have the same problem in ICS , after installing the original recovery and lock the bootloader the problem gone.
Samooorje is right but TT actually also, in some cases the ruu fails and after flashing back the stock recoveryand/or the stock boot.img they had succes. But this is not applied to everybody, i for instance did not had to reflash anything before running the JB ruu. Still have no clue why this is. :thumbup:
Sent from my GT-P5110 using xda app-developers app
back to stock for OTA
HTC ONE X on Stock Jelly Bean after i flashed JB viper x 3.3.3, everything was working fine. I decided to try an OTA update, reflashing the stock ICS back using Custom Ruu, wich is an awsome project. i returned to stock ICS 4.0.3, reflashed stock recovery, i tryied an ota update, i was able to get it ( not JB, i think it was something else, maybe ICS 4.0.4), than stuck in bootloop....in fast boot it was an red warning message, about recovery i think...i repeat the whole procedure once more, i got ICS 4.0.3 functionally, then OTA , after again boot loop. what do you think is the cause? could be the recovery? i flashed the recovery extracted from original stock ICS 4.0.3 rom
( RUU_ENDEAVOR_U_ICS_40_TMO_DE_1.29.111.11_Radio_1.1204.105.14_release_260730_signed)...i didn t try the JB stock recovery
now i m on ViperX again
hboot 1.36, CID T-MOB101
mightymike2012 said:
HTC ONE X on Stock Jelly Bean after i flashed JB viper x 3.3.3, everything was working fine. I decided to try an OTA update, reflashing the stock ICS back using Custom Ruu, wich is an awsome project. i returned to stock ICS 4.0.3, reflashed stock recovery, i tryied an ota update, i was able to get it ( not JB, i think it was something else, maybe ICS 4.0.4), than stuck in bootloop....in fast boot it was an red warning message, about recovery i think...i repeat the whole procedure once more, i got ICS 4.0.3 functionally, then OTA , after again boot loop. what do you think is the cause? could be the recovery? i flashed the recovery extracted from original stock ICS 4.0.3 rom
( RUU_ENDEAVOR_U_ICS_40_TMO_DE_1.29.111.11_Radio_1.1204.105.14_release_260730_signed)...i didn t try the JB stock recovery
now i m on ViperX again
hboot 1.36, CID T-MOB101
Click to expand...
Click to collapse
Are you posting this everywhere now ??? Stay in one thread. I will not follow you around here you know :banghead:
If you answered my question in the other thread we would be a lot further by now .....
Well I tried custom firmware after successfully unlocking my HTC One X. It says Unlocked but S-ON so not sure whats going on there? But since S-On I cannot change the CID as get the error (status read failed (too many links)) MY CID is H3G_001 and since I rooted my phone refuses to let me upgrade to OTA Jellybean which is frustrating forcing custom firmware.
Without updating CID I got stuck in a bootloop at least I guess it was as it was just stuck on the quitely brilliant screen for 20 minutes before I shut it off and tried another firmware which did the same. I am now in the process of a Nandroid recovery so I can at least use the phone. Three have a ton of bloatware which sucks. But I gotta stick with it as cannot figure out why it wont let me flash.. All help is appreciated. This phone is alot harder to flash than my HTC Desire which was a breeze.
Vhero said:
Well I tried custom firmware after successfully unlocking my HTC One X. It says Unlocked but S-ON so not sure whats going on there? But since S-On I cannot change the CID as get the error (status read failed (too many links)) MY CID is H3G_001 and since I rooted my phone refuses to let me upgrade to OTA Jellybean which is frustrating forcing custom firmware.
Without updating CID I got stuck in a bootloop at least I guess it was as it was just stuck on the quitely brilliant screen for 20 minutes before I shut it off and tried another firmware which did the same. I am now in the process of a Nandroid recovery so I can at least use the phone. Three have a ton of bloatware which sucks. But I gotta stick with it as cannot figure out why it wont let me flash.. All help is appreciated. This phone is alot harder to flash than my HTC Desire which was a breeze.
Click to expand...
Click to collapse
you cannot s-off the one x, all you have done is unlock the bootloader which will allow you to flash clockwork recovery and flash su etc.
Unlocked s-on is normal.
Unlocking has nothing to do with s-off
At present there is no way to change your cid.
2x errors have occurred here
Ota updates fail after rooting if you leave the custom recovery on there.
You needed to unlock. Flash or boot custom recovery.
Flash supersu binaries
Flash stock recovery
Then boot ROM.
That way it would have been rooted and still allow ota updates.
You have made things worse by flashing the firmware.zip
By flashing the firmware you have updated your hboot. Probably to 1.36
Which will no longer work for the ICS ROM that is on your phone.
You need to find a nandroid backup for jellybean for your cid.
Just switching to PC to find you some links
ok looked more into it
you should still be able to boot after restoring your nandroid.
dont forget to pull the boot.img from your backup and reflash it as flashing the firmware will have put the JB boot.img on
you will want to restore the stock recovery which you can find in the firmware.zip once you have restored your backup
reboot into your rom and do the OTA that way
Sent from my HTC One X using xda app-developers app
bagofcrap24 said:
Unlocked s-on is normal.
Unlocking has nothing to do with s-off
At present there is no way to change your cid.
2x errors have occurred here
Ota updates fail after rooting if you leave the custom recovery on there.
You needed to unlock. Flash or boot custom recovery.
Flash supersu binaries
Flash stock recovery
Then boot ROM.
That way it would have been rooted and still allow ota updates.
You have made things worse by flashing the firmware.zip
By flashing the firmware you have updated your hboot. Probably to 1.36
Which will no longer work for the ICS ROM that is on your phone.
You need to find a nandroid backup for jellybean for your cid.
Just switching to PC to find you some links
ok looked more into it
you should still be able to boot after restoring your nandroid.
dont forget to pull the boot.img from your backup and reflash it as flashing the firmware will have put the JB boot.img on
you will want to restore the stock recovery which you can find in the firmware.zip once you have restored your backup
reboot into your rom and do the OTA that way
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I restored from my nandroid and its working fine, all back to 4.0.4 with the phone unlocked I used CWM-SuperSU-v0.96.zip when i rooted my phone (or at least im sure I did as I did root over 6 months ago now).
So how would I go about updating to a custom firmware then?? Instead of the OTA as would prefer to get rid of the bloatware as half the apps aren't even English..
If you want a custom ROM
Try looking at something like latest android revolution HD
Very similar to stock but no bloat.
Sent from my HTC One X using xda app-developers app
bagofcrap24 said:
If you want a custom ROM
Try looking at something like latest android revolution HD
Very similar to stock but no bloat.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Okay thanks for that but how do I get it to work with my CID is what I would like to know do I have to first get OTA jellybean working then a custom firmware to update the CID? It seems a little confusing.. I listed my CID in first post but like I also said all custom firmwares I tried Viper X 3.3.4 and skydragon both left me with a phone stuck on boot screen for 20 minutes until i gave up and just turned off.
Your cid is irrelevant for anything except going to stock.
Custom ROMs arnt dependent on cid.
But they are dependent on hboot versions.
Cm10 ROMs will not work on any hboot>1.12
Any sense jellybean ROMs or ROMs with 3.1 kernels need a hboot version of at least 1.23
Couldn't saw viperx ROM but dragon is based on 3.17 so your hboot has to be minimum of 1.23
After installing the custom ROM you did flash the boot.IMG in fastboot didn't you?
Sent from my HTC One X using xda app-developers app
where i get the boot.img? I think i may have missed that part *duh* OKAY nm found that hboot is 1.12 need to update... Updating the Hboot means I have to go back to stock right? Then update OTA to get Hboot update then I can get JB..
Odp: Bootloop and changing CID issues
Vhero said:
where i get the boot.img? I think i may have missed that part *duh* OKAY nm found that hboot is 1.12 need to update... Updating the Hboot means I have to go back to stock right? Then update OTA to get Hboot update then I can get JB..
Click to expand...
Click to collapse
You need a stock boot.img, stock recovery and a stock ICS Rom. Then you will get OTA to JB, upgrading that way your hboot. Then you can flash any custom JB Rom.
P.s. The correct boot.img is in the rom's zip folder. Every time you change the rom you should flash the proper boot.img.
Wysyłane z mojego HTC One X za pomocą Tapatalk 2
bartdeli said:
You need a stock boot.img, stock recovery and a stock ICS Rom. Then you will get OTA to JB, upgrading that way your hboot. Then you can flash any custom JB Rom.
P.s. The correct boot.img is in the rom's zip folder. Every time you change the rom you should flash the proper boot.img.
Wysyłane z mojego HTC One X za pomocą Tapatalk 2
Click to expand...
Click to collapse
Yeah problem is I need RUU_ENDEAVOR_U_ICS_40_H3G_UK_2.17.771.3 to go back to stock and it doesn't exist.. Anyway around the RUU exe ?
EDIT NM found I can use the nandroid method.. Giving it a shot now.
Go here
http://forum.xda-developers.com/showthread.php?t=1975140
And download your matching nandroid ! Restore it including flashing the boot.img from the nandroid. After that you flash this recovery back
http://db.tt/U5CK4noo
And you are on stock again. And also able to update to JB
That did NOT work I got back to stock but without the RUU exe file it seems it will not install I loveked my phone aswell and when i try to install the OTA update i just get kicked to bootloader.
Edit didnt see above post sorry
So did it work.....I know my method works !
Sorry yeah it worked Was up till stupidly late trying to do it as I was following another method as I never saw yours (a really old one) Where I locked my phone so had to unlock etc.. Plus download that update OTA each time took 1 hour. I'm now on stock with Hboot 1.39 thankyou so much really appreciate! So now I just reflash recovery yeah? And backup nandroid then go for my custom rom?
Yes exactly !
I now have Android Revolution working perfectly and since I paid for Nova Prime I decided to go for lite after all and removed Sense thank so much for that method so much easier than the guides on here which make it sound so difficult I really was pulling my hair out!
Nice ! Glad it worked :thumbup:
CASE CLOSED !
hello dudes... my cid no is "HTC__023"... when i first got the phone I made an OTA update when my bootloader had been still locked.... then i unlocked it, flashed a custom recovery, and flashed the ICS Android Revolution which i still hv now... ok i want to upgrade to jelly bean. i downloaded this stock RUU "RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed"
which i thought was the correct one for me... it's saying that the image version is being updated from (Image version: 2.17.728.5) to (Image version: 3.14.707.24)... after it starts updating the signature, it gives me ((error 159: image error))... hv i missed sth ?
any solution plz even with a JB custom rom...
P.S.
I flashed a stock recovery and relocked bootloader before starting the update process.
Odp: [Q] JB
Ask in Q&A section, not here.
Sent from my HTC One X.
POLSKAAAAAA BIAAAALOOOO CZEEEERWONIIIII!!!!!!!!!
"Android's source is better than most liquor stores, it's opened 24/7" gallardo5 aka Daniel
abusseemkh said:
hello dudes... my cid no is "HTC__023"... when i first got the phone I made an OTA update when my bootloader had been still locked.... then i unlocked it, flashed a custom recovery, and flashed the ICS Android Revolution which i still hv now... ok i want to upgrade to jelly bean. i downloaded this stock RUU "RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed"
which i thought was the correct one for me... it's saying that the image version is being updated from (Image version: 2.17.728.5) to (Image version: 3.14.707.24)... after it starts updating the signature, it gives me ((error 159: image error))... hv i missed sth ?
any solution plz even with a JB custom rom...
P.S.
I flashed a stock recovery and relocked bootloader before starting the update process.
Click to expand...
Click to collapse
I think that you have take a incorrect RUU and if i am correct your phone now is a.... XD!
Any ways i dont know a lot of RUU but seem to be incorrect because the numbers doent matxh "x.xx.728.x" "x.xx.707.x", and i think that these three numbers have to be the same!
Sent from my HTC One X using xda app-developers app
If you are asking a question, you need to ask your question in the correct subforum, which I have moved this thread to.
There is no usable ruu for you, and i don't see a "new" nandroid backup either. But you can do this :
Download here your matching firmware. The HTC__023 one
http://forum.xda-developers.com/showthread.php?t=1957376
Place the file in the fastboot folder and rename it to firmware.zip
Put the phone in the bootloader and relock it. Then flash the firmware
Fastboot oem lock
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Do it multiple times until it says Oke, if it does not the first time !
Reboot the bootloader (hold power button and volume - button until you are in the bootloader)
Unlock the bootloader, flash a custom recovery and install a new JB rom of your choice
Even if the rom is stock or it's not possible.
In fact there is a JB stock nandroid you can use. But you have to update the hboot first
http://bugsylawson.com/index.php/files/file/186-cwm-nandroid-backup-cid-htc-023-3177281/
ok but i meant to say can i use ANY stock rom of my choice coz i want full arabic support or maybe i shd stick to my cid -related roms?
When you upgraded the hboot you can use any rom out here. Custom roms, stock rom.....whatever you want. The only cid related rom here is that stock nandroid backup i linked you. 99% of the custom roms here are based on the wwe base.
Thank you very much for giving a helping hand... it worked... i flashed the firmware successfully ... one last thing: generally, we flash a stock recovery and relock the bootloader before we install a stock RUU using the computer i mean ... Can i now, after flashing the firmware, install ANY stock RUU, arabic to be specific, using the computer as usual without flashing a stock recovery and locking my bootloader?
thank you
No you must flash a custom recovery and flash a custom rom. Or you must restore the stock nandroid backup.
You can't run a ruu. There is no ruu available for you to use.
2 choices :
1: install any custom JB rom
2: restore the stock 3.17 nandroid backup, flash back the stock 3.17 recovery. Then you be able to install official OTA
after i flashed the firmware and twrp jb recovery i cant access the sd card from the recovery anymore... pc says Mtp failed
any ideas?
ah ok got it sorted out.. i tried cwm recovery and it mounted successfully ....
Oke cool,so its all sorted now ?
Yes got it all .. thank you
However, as you can see in the attached image the internal storage is nearly full. Well I just flashed the Rom as you know. I wonder what the problem could be.
Sent from my HTC One X using Tapatalk 2
Check the installed apps list. Maybe the user installed apps before making the nandroid backup
Hi,
I'm trying to restore from custom rom to stock rom.
My phone is CID ORANG216 and I'm using xx.xx.65.xx RUU releases.
I have 2 relevant files:
The RUU exe - RUU_ENDEAVOR_U_ICS_40_S_Orange_CH-Generic_2.17.65.2_Radio_2.1204.135.20_release_275590_signed.exe
OTA UPDATE for the device - OTA_ENDEAVOR_U_JB_45_S_Orange_CH-Generic_3.16.65.2-2.17.65.2_release_296426gf2xgpisn8xs0fti
After flashing the stock recovery, boot_signed.img, rebootRUU, the RUU update fails because of version failure, I suspect that the HBOOT version is the trouble maker.
My phone is unlocked with S-ON with HBOOT 1.36 and the HBOOT in the RUU is 1.12 .
Due to S-ON I cant change the hboot.
I can't seem to find a workaround for it and install the RUU.
Any ideas??
I even thought about compiling the latest JB release from htcdev development center and flash it...
hanochg said:
Hi,
I'm trying to restore from custom rom to stock rom.
My phone is CID ORANG216 and I'm using xx.xx.65.xx RUU releases.
I have 2 relevant files:
The RUU exe - RUU_ENDEAVOR_U_ICS_40_S_Orange_CH-Generic_2.17.65.2_Radio_2.1204.135.20_release_275590_signed.exe
OTA UPDATE for the device - OTA_ENDEAVOR_U_JB_45_S_Orange_CH-Generic_3.16.65.2-2.17.65.2_release_296426gf2xgpisn8xs0fti
After flashing the stock recovery, boot_signed.img, rebootRUU, the RUU update fails because of version failure, I suspect that the HBOOT version is the trouble maker.
My phone is unlocked with S-ON with HBOOT 1.36 and the HBOOT in the RUU is 1.12 .
Due to S-ON I cant change the hboot.
I can't seem to find a workaround for it and install the RUU.
Any ideas??
I even thought about compiling the latest JB release from htcdev development center and flash it...
Click to expand...
Click to collapse
You need to relock the bootloader to use install RUU . It has nothing to do with hboot . Just take note that you have to use the RUU that is on the same build or higher .
chaun1308 said:
You need to relock the bootloader to use install RUU . It has nothing to do with hboot . Just take note that you have to use the RUU that is on the same build or higher .
Click to expand...
Click to collapse
doesn't work... I'm getting "Error [140]: BOOTLOADER VERSION ERROR"
The only RUU exe available is the one i mentioned and its old
I don't know how to use the OTA file without the original stock rom already installed...
if it helps anything the command "fastboot getvar version-main" on my device gives:
version-main: 3.16.65.2
hanochg said:
doesn't work... I'm getting "Error [140]: BOOTLOADER VERSION ERROR"
The only RUU exe available is the one i mentioned and its old
I don't know how to use the OTA file without the original stock rom already installed...
if it helps anything the command "fastboot getvar version-main" on my device gives:
version-main: 3.16.65.2
Click to expand...
Click to collapse
Like I mentioned . You have to look for the version that's the same with yours or higher to use the RUU . I guess you can't go back to stock until you find the RUU of your version or higher . Maybe you could try a stock ROM nand backup ?
Here are stock backups
http://forum.xda-developers.com/showthread.php?t=1975140
Thanks for the help
my version or CID is not there, any other resource for nands?
Just lock your bootloader using fastboot oem lock and run this RUU with admin privileges..
http://bugsylawson.com/files/file/4...2-radio-51204163r30-release-296363-signedexe/
What error do you get when you do this?
twelve cdrtutt
vin4yak said:
Just lock your bootloader using fastboot oem lock and run this RUU with admin privileges..
ht tp://bugsylawson.com/files/file/412-ruu-endeavor-u-jb-45-s-orange-ch-generic-316652-radio-51204163r30-release-296363-signedexe/
What error do you get when you do this?
Click to expand...
Click to collapse
OMG that's the file I've been looking for 2 days!!!!
worked like a charm, you're my hero for the day! :victory:
hanochg said:
OMG that's the file I've been looking for 2 days!!!!
worked like a charm, you're my hero for the day! :victory:
Click to expand...
Click to collapse
Great!!
can someone put a valid link for that ruu.the site is offline now and i can't finde a valid link to download.
only1 said:
can someone put a valid link for that ruu.the site is offline now and i can't finde a valid link to download.
Click to expand...
Click to collapse
uploaded it again:
h ttp://we.tl/Spg5YhElwV
hanochg said:
uploaded it again:
h ttp://we.tl/Spg5YhElwV
Click to expand...
Click to collapse
worked perfect.thx man you're the best!!!
so, people told me that i can get stock kernel within any custom roms, but where can i get the modules? and can any one tell me some kernels which feature the battery saver? im not asking which is the best since its against the rules, just give me some and ill try them myelf, thanks alot
SilverTattoo said:
so, people told me that i can get stock kernel within any custom roms, but where can i get the modules? and can any one tell me some kernels which feature the battery saver? im not asking which is the best since its against the rules, just give me some and ill try them myelf, thanks alot
Click to expand...
Click to collapse
I don't think your questions relate to the subject here.
Anyway, custom roms are based on the stock rom and most of the times include a file called firmware.zip, look it up in the costum_rom.zip file.
hboot updates are tricky on this device and for upgrading it (from ICS to JB supported hboot) you need a special firmware built for your specific htc one x model (look at the manuals for more instructions).
For the battery saving, I think it depends on the rom you install and not the kernel (or maybe both because they come together?), check out for old posts about that issue, I'm sure its not the first time someone asks about it.
hope it helps