Related
Ok the system update crap has been driving me nuts.
so I finally got the deodex rooted ma7 update for the Note II (sprint) and its STILL bugging me about a system update ??
what gives? I installed deodex ma7 and ma7 modem.
am I missing something?
Accept the update, it will fail harmlessly and not ask you again.
Sent from my SPH-L900 using xda premium
The post above is correct. However to answer your question its bugging you to update cause the latest is MC2
Sent from my SPH-L900 using xda app-developers app
Update. It will ask again in a few days. So it's not a very good answer. I believe there is an apk you can remove or freeze but I don't know what it is off hand. Sorry.
Sent from my SPH-L900 using xda premium
I didn't stay on the rom I was running long enough to see if it will ask again. Thx for pointing that out. But if you're running deodexed stock just install deodex stock mc2. Theres also the flashable mc2 modem and kernel. Its all in our android development section.
Sent from my SPH-L900 using xda app-developers app
jayare313 said:
I didn't stay on the rom I was running long enough to see if it will ask again. Thx for pointing that out. But if you're running deodexed stock just install deodex stock mc2. Theres also the flashable mc2 modem and kernel. Its all in our android development section.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Installing MC2 is one way, but since MC2 kills both Wallet and your battery, I don't think it's a super great option.
Found an app called System Update, but so far even uninstalling it does not prevent the notification.
blargh...
I've now backed up and un-installed System Update, Smart Device Manager, Sprint DM Service, Sprint Installer, SysScope, Sprint Zone, and still, the notification is there upon reboot.
Logcat Extreme shows some weird stuff at the moment. It's showing something called SystemUpdateService verifying that the update zip is downloaded into /cache, but then it's also showing an error that says SystemUpdateService application does not exist. So what's running then? Maybe a dalvik cached copy. I'm going to reboot into twrp and wipe cache and dalvik and we'll see...
--
bkw
The APK you're looking for is FWUpgrade.apk
-go to /cache
-delete update file
-go to system/app
-Rename FWUpgrade.apk to FWUpgrade.apk.bak
-Accept the update and attempt to run(it will end the count down and do nothing)
-reboot phone and it'll never ask you again to update
KEYofR said:
Installing MC2 is one way, but since MC2 kills both Wallet and your battery, I don't think it's a super great option.
Found an app called System Update, but so far even uninstalling it does not prevent the notification.
blargh...
I've now backed up and un-installed System Update, Smart Device Manager, Sprint DM Service, Sprint Installer, SysScope, Sprint Zone, and still, the notification is there upon reboot.
Logcat Extreme shows some weird stuff at the moment. It's showing something called SystemUpdateService verifying that the update zip is downloaded into /cache, but then it's also showing an error that says SystemUpdateService application does not exist. So what's running then? Maybe a dalvik cached copy. I'm going to reboot into twrp and wipe cache and dalvik and we'll see...
--
bkw
Click to expand...
Click to collapse
So if I have a rooted stock ma7 rom and install an mc2 rooted stock rom I will lose my ability to use Google wallet?
Sent from my Amazing Galaxy Note 2!
yankees45us said:
So if I have a rooted stock ma7 rom and install an mc2 rooted stock rom I will lose my ability to use Google wallet?
Click to expand...
Click to collapse
So far as we know so far that's correct.
Possible exception that I haven't tested myself or seen anyone else yet either:
The xposed framework hack and any normal market version of Wallet doesn't work so far.
But there is another way to get working Wallet which is to use a patched wallet apk that doesn't need xposed framework. I am currently using that patched wallet apk and no xposed framework. Maybe that version will work on mc2 or maybe not. I haven't seen anyone say about it yet. All I've seen is that the regular market version of wallet plus xposed framework which works on ma7 does not work on mc2.
Battery life dont really seem much different to I me. And I never use wallet much anyhow.
Sent from my SPH-L900 using xda app-developers app
BrianBaker said:
The APK you're looking for is FWUpgrade.apk
-go to /cache
-delete update file
-go to system/app
-Rename FWUpgrade.apk to FWUpgrade.apk.bak
-Accept the update and attempt to run(it will end the count down and do nothing)
-reboot phone and it'll never ask you again to update
Click to expand...
Click to collapse
Well... es explorer says there are no files in /cache including not the filename that logcat clearly shows. Yes I have show hidden files in settings and yes I'm rooted.
And... I already have no such apk named FWUpgrade.apk anywhere.
So I'm rather mystified. Because I still get the notification even after wiping both cache and dalvik in twrp and rebooting.
Sent from my SPH-L900 using xda premium
Sent from my SPH-L900 using xda premium
...ok so after all this, with all these apks deleted and the cache empty etc, then I went to the notification and accepted the update one more time, it failed of course. And now finally I think that cleared it.
So it's not enough to accept the update and let it fail.
It's not enough to delete (or freeze or rename etc) one or more apk's.
You have to do both. Disable the apk(s). Wipe cache or delete files in /cache. THEN accept the update and let it fail.
Sent from my SPH-L900 using xda premium
KEYofR said:
So far as we know so far that's correct.
Possible exception that I haven't tested myself or seen anyone else yet either:
The xposed framework hack and any normal market version of Wallet doesn't work so far.
But there is another way to get working Wallet which is to use a patched wallet apk that doesn't need xposed framework. I am currently using that patched wallet apk and no xposed framework. Maybe that version will work on mc2 or maybe not. I haven't seen anyone say about it yet. All I've seen is that the regular market version of wallet plus xposed framework which works on ma7 does not work on mc2.
Click to expand...
Click to collapse
Thanks. I will stay on ma7 since I use Google wallet often. Plus the only real issue I'm having is the home button issue and sometimes the show gallery. Both I can deal with.
Sent from my Amazing Galaxy Note 2!
Still no more notification.
Yay!
Now just to figure out which of those eleventy-seven apk's I removed was the only one that actually mattered....
Maybe one of them was named FWUpdate.apk as the other Brian mentioned, and I just never saw it's filename because I was seeing the package name in Titanium or System Tuner Pro instead and maybe already uninstalled it before he posted.
--
bkw
ParanoidAndroid for AOSP 4.3 (JLS36G)
Work in Progress
Please make sure you have backups for anything you don't want to lose.
Caution is advised. No promises this will not eat your device and take over your home.
Google apps are not official, these have PA Specific change, we have tested all apps but you could still encounter issues.
If you have an issue please make sure it is repeatable, capture logcat/dmesg, etc and post to pastebin or similar.
Installation
Update your recovery to the latest version. Pre 4.2 recoveries can mess up your sd card/storage. We recommend TWRP.
Download pa google apps: From GOO Updated 17-SEP-2013
Download rom: From GOO Updated 21-SEP-2013
Follow PA on Google+ for changes and other info
Perform a factory reset in recovery, unless you are already on PA 3.94+ (or if you run into problems)
Flash ROM first, then gapps
Wipe dalvik & cache
Reboot and wait, first bootup can take a little time
Enter your Google account info, press home when you encounter the black screen
Please do not restore system apps, system data and Google apps. This can cause bootloops and other problems due to mismatches coming from CM to AOSP and moving from Android version 4.1.2 to 4.2 to 4.3
Hints
PA Google+ (Changes, Updates) https://plus.google.com/107979589566958860409/posts
ParanoidAndroid Sources found on github here
kernel source
Updates
04-AUG-2013 - Fixed usb storage mounting and settings crash.
Reserved 2
Reserved for future use.
I just got the update notification from your 3.91 PA ROM. The changelog says no other root app needs to be installed, but that didn't work for me. I lost root on 3.92 if I didn't flash the SU 1.51 zip file. No biggie though, let me know if this should work and I did something wrong.
On another note, seems like /etc/init.d scripts are being run on boot, but anything that needs root isn't working. I'm trying to find a workaround, but nothing is working out so far. I've tried adding "su -c <some command>" but that still didn't work. Any ideas are appreciated.
Thank you, this is a great ROM!
sttovo said:
I just got the update notification from your 3.91 PA ROM. The changelog says no other root app needs to be installed, but that didn't work for me. I lost root on 3.92 if I didn't flash the SU 1.51 zip file. No biggie though, let me know if this should work and I did something wrong.
On another note, seems like /etc/init.d scripts are being run on boot, but anything that needs root isn't working. I'm trying to find a workaround, but nothing is working out so far. I've tried adding "su -c <some command>" but that still didn't work. Any ideas are appreciated.
Thank you, this is a great ROM!
Click to expand...
Click to collapse
Root works for me on full wipe. Nova Launcher and ES File Explorer were granted root.
Thank you do much for bringing in the 4.3 update!
Anyone getting an immediate force close when trying to see storage in the settings menu also media process crashes when I connect my tablet to a pc
Sent from my Galaxy Nexus using Tapatalk 4 Beta
jtkes693 said:
Anyone getting an immediate force close when trying to see storage in the settings menu also media process crashes when I connect my tablet to a pc
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah. It's PA's code. Unofficial build has it too.
Attack_Dog said:
Yeah. It's PA's code. Unofficial build has it too.
Click to expand...
Click to collapse
Figured out it was ktoons kernel that was causing it not sure if its cuz of pa's code or kernels problem but leaving the included kernel fix it
Sent from my Galaxy Nexus using Tapatalk 4 Beta
---------- Post added at 09:23 PM ---------- Previous post was at 09:20 PM ----------
jtkes693 said:
Figured out it was ktoons kernel that was causing it not sure if its cuz of pa's code or kernels problem but leaving the included kernel fix it
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
Nevermind its not a kernel problem had accidently flashed an older version
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Attack_Dog said:
Root works for me on full wipe. Nova Launcher and ES File Explorer were granted root.
Click to expand...
Click to collapse
Do you install any superuser type apps from the Playstore in support of root? I see an entry in Settings for "Superuser", but I never get prompted for root access and my root apps claim in not rooted. This is from a clean install (Factory Reset) and only installing the few apps that need root (not doing a restore).
Edit - If I was unlocked and rooted in 4.2.2, there's no need for me to root again once I've flashed PA 3.92? Flashing the latest PA is all I need?
sttovo said:
Do you install any superuser type apps from the Playstore in support of root? I see an entry in Settings for "Superuser", but I never get prompted for root access and my root apps claim in not rooted. This is from a clean install (Factory Reset) and only installing the few apps that need root (not doing a restore).
Edit - If I was unlocked and rooted in 4.2.2, there's no need for me to root again once I've flashed PA 3.92? Flashing the latest PA is all I need?
Click to expand...
Click to collapse
Superuser works fine, supersu works fine and es file explorer works fine (100% fresh install too)
sttovo said:
Do you install any superuser type apps from the Playstore in support of root? I see an entry in Settings for "Superuser", but I never get prompted for root access and my root apps claim in not rooted. This is from a clean install (Factory Reset) and only installing the few apps that need root (not doing a restore).
Edit - If I was unlocked and rooted in 4.2.2, there's no need for me to root again once I've flashed PA 3.92? Flashing the latest PA is all I need?
Click to expand...
Click to collapse
Yes you should be good. I flashed and didn't have to do anything else.
Btw this ROM is awesome. So glad to have tablet ui on 4.3. Using Halo and bubble launcher for the first time. Works really good.
Sent from my Nexus 10 using Tapatalk 4 Beta
Is it possible to set transparent navigation bar in this rom?
Storage in settings gets forced closed.
Sent from my HTC Explorer A310e using xda premium
kaivalya97 said:
Storage in settings gets forced closed.
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Yup. I get an FC for that and an android.process.media has stopped message at boot. Coming off a factory reset and fresh install - twice.
Installing now.
Skickat från min Galaxy Nexus med Tapatalk 4
kaivalya97 said:
Storage in settings gets forced closed.
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Confirmed
Sent from my Nexus 10 using Tapatalk 2
Seems that TB don't work with licence but without licence I can do single backup with non licensed version without not enough memory error.
Wysłane z mojego Nexus 10 za pomocą Tapatalk 4
cpuks said:
Seems that TB don't work with licence but without licence I can do single backup with non licensed version without not enough memory error.
Wysłane z mojego Nexus 10 za pomocą Tapatalk 4
Click to expand...
Click to collapse
Did you chance the backup location path to the ...\legacy\... thing? TB works for me after changing it.
DeathMetal_i9000 said:
Did you chance the backup location path to the ...\legacy\... thing? TB works for me after changing it.
Click to expand...
Click to collapse
Thanks! TB now works after that change of path. Cheers!
Welcome to the first fully working almost stock NE2 rom. It has all of the stock apps (including dialer) working along with all the stock functions (spen clipping). I call it almost stock because there are some changes such as tweaks and root included. I have a modified android.permissions.jar to enable the reboot menu and added init.d support to the stock kernel. Talking about the stock kernel I have also modified the ram-disk to completely remove knox. Also added in a few tweaks while I was in there.
Right now the rom will be released as Deodexed but I am working on a special odexed version with every app odexed. The ota and tar have most things odexed but not everything. Even my addon apps will be odexed. Only deodexed will be the apps you install.
Links and change logs will be located in post #2 when they are ready for public use. Change logs may appear before the link. If there is a change log and no link then it is being tested and is not ready for public use yet.
If you have an issue please report which rom version you are using (this will be located in about device under settings) and if possible add a logcat. Logcats will give the information I need to help fix the issue. If your issue shows up after you restored with TB or any other such app then it is your issue and not mine. I will only support issues with the apps I included and only if you follow every single step in my install instructions. I have way too much to do as it is without trying to fix your mistakes or some other devs apps.
required recovery
Philz 6.07.9
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900/
Flashing instructions
1. Download rom and place on on your external sdcard
2. Flash Philz (odin or recovery style flash will work fine)
3. Backup your current rom
4. Boot into philz and wipe everything
5. Under mounts wipe /data /data/media (this is a must)
6. Reboot recovery (this is a must)
7. Flash rom and reboot
Links and Change logs
Change Logs
Stock NE2 Deodexed/Rooted 1.0
Deodexed Official NE2 tar from samsung
Removed all knox from rom, kernel, and build.prop
Rooted
android.permissions.jar includes reboot options
init.d support added to kernel
init.d tweaks
modified platform.xml for external sdcard write permissions
/data/local for custom boot animations
es file explore included
moved massive amount of bloat and apps to /data/app
build.prop tweaks
busybox added
many settings that samsung/sprint disabled have been enabled again
Stock NE2 Deodexed/Rooted 1.1
Moved stock browser and sns to /system/app to fix them
Nothing much else changed or will be changed unless something is found broken
Stock NE2 Deodexed/Rooted 1.2
Found a few Knox files left that were causing issues with the new tw kernel and removed them
nothing new
Stock NE2 Odexed/Rooted 1.2
This is just an Odexed version of 1.2
all apps and framework Odexed even /data/app is odexed
only thing not Odexed are the apps you install
If you delete/uninstall any apps make sure you remove the .odex files afterwards
Links
Cricket MMS settings
This is the work of @mrwright83 and he has been nice enough to share so please remember to thank him.
1. go to your data settings by hitting ##3282# and select edit (depending on rom might have to enter msl)
2. go to mmsc and change it to this http://mms.mycricket.com/servlets/mms?x-cricket-mdn=999_999_9999 (9's are your phone number)
3. then go your mms proxy and change it to wap.mycricket.com
4. lastly go to mms port and change it to 8080
And that's it
For anyone wanting to use this as a base for your own custom rom feel free and remember to give credit and a link to this thread in your OP. There is no need to ask for my permission to use this since the main reason it is here is for a base for custom roms.
Link 2 rom
SGNote2
guycan said:
Link 2 rom
SGNote2
Click to expand...
Click to collapse
It is in the OP now. I had to finish waiting on the upload first so I went ahead and created the OP while waiting.
Yea just seen thanks man 4 all the work waiting till I get home in like 2 hr then download and test thanks
SGNote2
Thanks for your work.
Btw with the 4.4.2 update, does that come with firmware?
Sent from my SPH-L900 using Tapatalk
huytrang90 said:
Thanks for your work.
Btw with the 4.4.2 update, does that come with firmware?
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Read the super short FAQ section in post one.
Sweet. Thank you thank you thank you jlmancuso ur awesome XD
Very cool man thanks dude......:good:
puffyjello said:
Sweet. Thank you thank you thank you jlmancuso ur awesome XD
Click to expand...
Click to collapse
No problem. I know how painful these factory releases can be so this should help.
Thank for all you have done for our community!!!
Sent from my SPH-L900 using xda premium
Just flashed, so far so good! Not much different, other than the gps location is more complicated.
I've tried many times and can't flash this. keep getting error status 7...
keep getting unable to mount /preload
thanks, but did not work for me
stuck at the samsung logo after reboot.
Leoisright said:
I've tried many times and can't flash this. keep getting error status 7...
keep getting unable to mount /preload
Click to expand...
Click to collapse
Try different versions of philz recovery or reflash the version you are using now should fix that error I would think.
Leoisright said:
I've tried many times and can't flash this. keep getting error status 7...
keep getting unable to mount /preload
Click to expand...
Click to collapse
Use philz 6.07.9 and you won't have a problem.
johnnyPPK said:
thanks, but did not work for me
stuck at the samsung logo after reboot.
Click to expand...
Click to collapse
Were you one of the few who got soft bricked? If not what rom did you come from?
Leoisright said:
I've tried many times and can't flash this. keep getting error status 7...
keep getting unable to mount /preload
Click to expand...
Click to collapse
Here, odin this CWM and format preload, works for me every time
http://d-h.st/NuM
then switch to philz and flash
Can't wait to get home and try this.....
Sent from my SPH-L900 using Tapatalk
There's a post in the at&t Samsung Galaxy 3 original android development for cm12 running lollipop 5.0. I flashed it on my t999 and it works great. Just follow the flashing instructions and flash all the files they say to flash. Your welcome.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
So what kernel are you using?
I am dowloading it right now! Does the sim working properly since there is difference in modem!
Finally installed it. All cm features are missing
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Err....
Well, I can't say anything. I'm working on porting cm11 from the Note 2 LTE to the S3. If that works, I'm porting cm12 to the s3, hopefully.
Yeah it's an alpha build so the bells and whistles of cm features aren't available. It's basically just a working version of 5.0. As time goes on they will add the bells and whistles.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Its actually an almost perfect build for me... Only issue is camera and contacts fc when a synced contact's name is more than one word.... Even had faster GPS lock than 4.4 roms...
Don't seem to miss cm features as I don't use much... Just probably on screen buttons and skip tracks with volume button is what I'm missing
Running this on my phone. It was kind of wonky at first but after 2-3 wipes/flashes this is the best ROM I have ever run on this phone.
If you get tons of force closes, no root, and can't seem to download anything wipe and re flash.
As of now everything is working for me(including the camera using nexus camera).
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Test builds V4 is running great, ive been running it for 2 days and ive had 0 FC's! just camera doesnt work, but you can download an alternate camera from the play store (nexus camera or camera zoom FX works for me). All you have to do before flashing is modifying the "updater script", open and edit the updater script and just replace all "d2att" with "d2tmo", save changes. Do a clean flash. I use the usual apps (fb, tw, whatsapp, a couple basic games) and everything works well. I dont use any apps that use the camera (vine, instagram, etc) so I cant report on those. No need to flash a kernel or different radio.
V5 is working fine for me. Everything works except video recording(pictures work with Nexus Camera) and cast screen on Chromecast. I tried the fix for the Nexus 7 but it disconnects immediately.
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
outlawnunn said:
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
Click to expand...
Click to collapse
just remove the first line and then try ?
Sent from my SGH-T999 using XDA Free mobile app
outlawnunn said:
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
Click to expand...
Click to collapse
I tried editing the update script using root explorer, and it did the editing. however, when I moved/copy and paste the edited update script back to the Rom zip, it would move the original/unedited update script. So this is what I did: I extracted the update script and edited with root explorer, then I emailed the edited update script to myself, then I open the rom with 7-zip on my computer and replaced the original update script with the one I edited, saved the zip to my desktop. I then proceed to flash and it worked perfectly.
allendj81 said:
I tried editing the update script using root explorer, and it did the editing. however, when I moved/copy and paste the edited update script back to the Rom zip, it would move the original/unedited update script. So this is what I did: I extracted the update script and edited with root explorer, then I emailed the edited update script to myself, then I open the rom with 7-zip on my computer and replaced the original update script with the one I edited, saved the zip to my desktop. I then proceed to flash and it worked perfectly.
Click to expand...
Click to collapse
I dont suppose you could share the file? For the rest of us.
patrickae said:
I dont suppose you could share the file? For the rest of us.
Click to expand...
Click to collapse
I rather not, for some reason the guy who put together the zip took down the thread and his account is suspended, who knows what happened. Its very easy to modify tho, give it a try.
i took a day or so by finally got my son s3 working
The current build is build 5 dated 11/25. It works better than build 4. You can use a few different cameras but stock camera still not working right. If you use Philz touch recovery you don't need to modify the script, it will flash just fine. It will say your phone is an i747 but that is just cosmetic it changes nothing with functionality like data or calls, etc. Because this is just a software rom and doesn't change anything hardware specific. Enjoy.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Thank you...
rcurtis805 said:
There's a post in the at&t Samsung Galaxy 3 original android development for cm12 running lollipop 5.0. I flashed it on my t999 and it works great. Just follow the flashing instructions and flash all the files they say to flash. Your welcome.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Where is the download link? I have been looking all over the place for CM12 on T999
I tried changing all the d2att to d2tmo and it is all changed but when I try to flash it, it gets a couple fail messages about mounting something and then I try to reboot it gets stuck in bootloop.
When I try to flash without changing the d2att it won't even flash.
Anyone got V5?
Does anyone know how to get viper4android working on the newest marshmallow update (mra58v) for n7 2013 using elementalx kernel? Had it working on marshmallow before updating. Since wugfresh nrt is being buggy about the bootloader at the moment and also not supporting the newest os, I rooted using the beta-supersu-v2.52 and elementalx-n7-5.04. All is good except now I can't get viper to flash in twrp (following exactly the steps involving busybox & selinux mode changer- which worked fine before).
OS: mra58v
Kernel: 3.4.0-elementalx-n7-5.04
N7 2013
Sent from my Nexus 7 using XDA Free mobile app
Does anyone know how to get viper4android working on the newest marshmallow update (mra58v) for n7 2013 using elementalx kernel? Had it working on marshmallow before updating. Since wugfresh nrt is being buggy about the bootloader at the moment and also not supporting the newest os, I rooted using the beta-supersu-v2.52 and elementalx-n7-5.04. All is good except now I can't get viper to flash in twrp (following exactly the steps involving busybox & selinux mode changer- which worked fine before).
OS: Stock 6.0 mra58v
Kernel: 3.4.0-elementalx-n7-5.04
N7 2013
Sent from my Nexus 7 using XDA Free mobile app
It's not flashing probably because you have no more space in /system, especially if you are using stock ROM. Use a file manager and see how much space you have left. I am betting just a few mbs. Delete some apks that you don't need (be careful not to delete system critical ones like IME or TTS), reboot and make sure it boots up fine. Then flash your viper.zip. Also, make sure you are unticking the Enforcing radio in the ElemetalX aroma installer.
It works perfectly fine for me on CleanROM with the only exception is the viper package that I flashed broke casting. It was my own fault, as I left something out of the libs when I packaged it myself.
Woody said:
It's not flashing probably because you have no more space in /system, especially if you are using stock ROM. Use a file manager and see how much space you have left. I am betting just a few mbs. Delete some apks that you don't need (be careful not to delete system critical ones like IME or TTS), reboot and make sure it boots up fine. Then flash your viper.zip. Also, make sure you are unticking the Enforcing radio in the ElemetalX aroma installer.
It works perfectly fine for me on CleanROM with the only exception is the viper package that I flashed broke casting. It was my own fault, as I left something out of the libs when I packaged it myself.
Click to expand...
Click to collapse
Will try these suggestions, thank u!!
Sent from my Nexus 7 using XDA Free mobile app