Hello all. I have recently installed CM 10.2. My device will not show up in Windows when running CM rom. When i run stock rooted it shows up. Any ideas? I have usb debugging checked, all drivers installed.
bynarie said:
Hello all. I have recently installed CM 10.2. My device will not show up in Windows when running CM rom. When i run stock rooted it shows up. Any ideas? I have usb debugging checked, all drivers installed.
Click to expand...
Click to collapse
Go to settings then storage n then USB connection and make sure mtp is checked
thanks
Hnk1 said:
Go to settings then storage n then USB connection and make sure mtp is checked
Click to expand...
Click to collapse
Thanks a lot. Worked perfectly
Hnk1 said:
Go to settings then storage n then USB connection and make sure mtp is checked
Click to expand...
Click to collapse
So what is the trick if this has been ticked the whole time but still won't show up? I've glot CM 10.2, MTP is checked, when plugged in the laptop it shows up at the bottom on the task bar & then when I right click it says Nexus 7.
My device shows up under devices & printers, but not under computer when clicking the start menu on the PC & clicking computer. My HDD, DVD drive & SD card all show up, but no N7 so I can't transfer files.
Am I missing something else?
quickstang said:
So what is the trick if this has been ticked the whole time but still won't show up? I've glot CM 10.2, MTP is checked, when plugged in the laptop it shows up at the bottom on the task bar & then when I right click it says Nexus 7.
My device shows up under devices & printers, but not under computer when clicking the start menu on the PC & clicking computer. My HDD, DVD drive & SD card all show up, but no N7 so I can't transfer files.
Am I missing something else?
Click to expand...
Click to collapse
Please elaborate a bit. What I understood is :
Nexus 7 doesnot show up like an SD card etc but as a mobile device yet you can not transfer stuff ?
It doesnot show up like a drive. For me, on Windows 7, it shows up like a mobile device in other devices with the name "Nexus 7". If i click it , I get into the internal memory. You can not rename folders or transfer files within Nexus(as it is used by the Nexus itself so it can not be changed). However, try copy a file from PC to your nexus. Does that work? If yes, that is perfectly normal. Use a file explorer like ES file explorer to rename and transfer files within Nexus. But Es file explorer has some bugs with JB 4.3 esp with extracting a rar file.
If this doesnot solve it, I remember there was also some settings for it. I can not remember though as I havenot used the latest CM 10.2.
Hnk1 said:
Please elaborate a bit. What I understood is :
Nexus 7 doesnot show up like an SD card etc but as a mobile device yet you can not transfer stuff ?
It doesnot show up like a drive. For me, on Windows 7, it shows up like a mobile device in other devices with the name "Nexus 7". If i click it , I get into the internal memory. You can not rename folders or transfer files within Nexus(as it is used by the Nexus itself so it can not be changed). However, try copy a file from PC to your nexus. Does that work? If yes, that is perfectly normal. Use a file explorer like ES file explorer to rename and transfer files within Nexus. But Es file explorer has some bugs with JB 4.3 esp with extracting a rar file.
If this doesnot solve it, I remember there was also some settings for it. I can not remember though as I havenot used the latest CM 10.2.
Click to expand...
Click to collapse
So the first picture is of devices. You can see the N7 is shown, but clicking it only takes me to the info about the device. No way to transfer stuff. Right clicking gives me eject, troubleshoot, properties.
The second is the windows section where it shows the HDD, etc. No N7. I was expecting it to show up to be able to transfer files from computer to the device as in a mass storage device. I did this with the last one where I could see everything on the device.
I have a 600mb file I want to transfer to the tablet & was expecting to just copy it over.
quickstang said:
So the first picture is of devices. You can see the N7 is shown, but clicking it only takes me to the info about the device. No way to transfer stuff. Right clicking gives me eject, troubleshoot, properties.
The second is the windows section where it shows the HDD, etc. No N7. I was expecting it to show up to be able to transfer files from computer to the device as in a mass storage device. I did this with the last one where I could see everything on the device.
I have a 600mb file I want to transfer to the tablet & was expecting to just copy it over.
Click to expand...
Click to collapse
I am attaching my pictures how I see my nexus when it is connected. You do not see Nexus 7 if it is not connected properly or not enabled from Nexus settings.
Does your device charge when you connect to the PC ?
Does your device connect in USB debugging mode ?
Further, go into device manager in My computers and see if there are any question marks on any device? Make sure your device is connected at that time.
Try to connect it to different port or without USB hub if you are using as sometimes, devices do not show up.
Moreover, try to connect your device to the PC and then tick on MTP and then change few options like connect via different methods and see if any usb connection is seen ?
Also, close all other mobile softwares in the background and taskbar (Kies, Sony PC companion, LG, Nokia PC suit) and then try connecting it.
They are many a times culprits. Even try uninstalling their drivers and programmes.
IF USB DEBBUGGING WORKS AND CHARGING, DRIVERS ARE PERFECTLY INSTALLED IN THE PC
YOUR PROBLEM SEEMS TO ME FROM NEXUS SETTINGS.
IT SIMPLY COULD BE A BUG AS CM is still nightly
I hope this helps
quickstang said:
So the first picture is of devices. You can see the N7 is shown, but clicking it only takes me to the info about the device. No way to transfer stuff. Right clicking gives me eject, troubleshoot, properties.
The second is the windows section where it shows the HDD, etc. No N7. I was expecting it to show up to be able to transfer files from computer to the device as in a mass storage device. I did this with the last one where I could see everything on the device.
I have a 600mb file I want to transfer to the tablet & was expecting to just copy it over.
Click to expand...
Click to collapse
Hnk1 said:
I am attaching my pictures how I see my nexus when it is connected. You do not see Nexus 7 if it is not connected properly or not enabled from Nexus settings.
Does your device charge when you connect to the PC ?
Does your device connect in USB debugging mode ?
Further, go into device manager in My computers and see if there are any question marks on any device? Make sure your device is connected at that time.
Try to connect it to different port or without USB hub if you are using as sometimes, devices do not show up.
Moreover, try to connect your device to the PC and then tick on MTP and then change few options like connect via different methods and see if any usb connection is seen ?
Also, close all other mobile softwares in the background and taskbar (Kies, Sony PC companion, LG, Nokia PC suit) and then try connecting it.
They are many a times culprits. Even try uninstalling their drivers and programmes.
IF USB DEBBUGGING WORKS AND CHARGING, DRIVERS ARE PERFECTLY INSTALLED IN THE PC
YOUR PROBLEM SEEMS TO ME FROM NEXUS SETTINGS.
IT SIMPLY COULD BE A BUG AS CM is still nightly
I hope this helps
Click to expand...
Click to collapse
Also I found this thread. I am sure this will help
http://forum.xda-developers.com/showthread.php?p=44262098
Hnk1 said:
Also I found this thread. I am sure this will help
http://forum.xda-developers.com/showthread.php?p=44262098
Click to expand...
Click to collapse
May be a CM bug. I just connected my Galaxy Nexus running 4.2.2 AOKP & I just transferred files from my phone to computer.
The N7 is connected, charging, debugging works, etc. So i'll keep waiting to see what the deal is with each new CM install.
I do appreciate all of the suggestions. Should have tested it on CleanRom before flashing CM to see if it was working then.
I am having the same problem with cleanrom
Related
As the title says; all of a sudden I cannot drag & drop folders from phone to PC. It starts transferring and it either stops without anything moving over or stops after 2-3 folders. Need to make a back-up of CWM & TiBu so I can format everything and do a new, fresh install but, nada..
I had this problem as well. My fix was to turning off and on debugging sometimes helps as well as changing the modes for the USB connection from MTP to PTP and let the drivers install then change back to MTP and finaly keep awake in the dev options on the settings menu.
After all did all that mine hasn't had a problem again yet. I've also herd that you should plug it into a USB port that's not a hub/extra port on the case go for one of the USB ports on the back of your PC that are directly on the mobo.
Good luck.
same my problem http://forum.xda-developers.com/showthread.php?t=1460152
try reboot phone and transfer again
I have the same problem but it is only within clockworkmod folder. Any other folder or file copies with no issues over to my PC. Windows explorer crashes every time i attempt to move one of my nandroids over to my PC. I am rooted with the correct drivers.
Sent from my Galaxy Nexus using XDA App
~SonkuB~ said:
same my problem http://forum.xda-developers.com/showthread.php?t=1460152
try reboot phone and transfer again
Click to expand...
Click to collapse
Must have eventually done the trick, I managed to transfer the 4-5 folders I needed. Now fresh start of everything, I nuked it.
4u2nvinmtl said:
I had this problem as well. My fix was to turning off and on debugging sometimes helps as well as changing the modes for the USB connection from MTP to PTP and let the drivers install then change back to MTP and finaly keep awake in the dev options on the settings menu.
After all did all that mine hasn't had a problem again yet. I've also herd that you should plug it into a USB port that's not a hub/extra port on the case go for one of the USB ports on the back of your PC that are directly on the mobo.
Good luck.
Click to expand...
Click to collapse
Thanks guys!
Droid_Junky said:
I have the same problem but it is only within clockworkmod folder. Any other folder or file copies with no issues over to my PC. Windows explorer crashes every time i attempt to move one of my nandroids over to my PC. I am rooted with the correct drivers.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Try rebooting the phone a couple of times, did it eventually for me. At least I think that's what it was..
Hi guys, was hoping someone on the forums was able to help me out with an issue I am having with my Note 2. I am a first time android user so I might be doing something wrong. Whenever I connect my note 2 to my computer, it gives me a pop up message on my phone.
"Unable to find software on your PC that can recognize your device. Service pack 3, Windows Media Player, version 10 or higher, for Windows XP or Android File Transfer for Mac OS must be Installed."
After getting this message I went to update everything on my computer. I am current on my Service Pack and I downloaded Windows media player 11. I also downloaded Kies on my computer and still, my PC doesnt recognize my phone.
Has anyone else ever experienced this issue? Also, do I need to have a micro SD card to be able to connect to my PC?
I believe right now the pc is trying to read from your device's internal memory but it doesn't have the proper drivers installed.
If you had a micro sd, it would just show up in your file explorer as readable media that you can transfer files to and from.
Sounds to me like you just need proper drivers installed and then you can do the same with your internal storage.
Sent from my Samsung Galaxy Note II (SGH-I317) on the infamous AT&T Network.
That makes a lot of sense. Thank you for your reply. I guess I should just pick up a micro sd card and then try it out again. Thanks again for your help.
No problem. If your browse the developer forum or do a search, I'm sure you could dig up the drivers somewhere. I'm honestly surprised that this device didn't include a disc to install proper drivers.
Sent from my Samsung Galaxy Note II (SGH-I317) on the infamous AT&T Network.
i to had this same problem, it wouldn't recognize the phone so i had to install and uninstall the samsung drivers 10 times for it to finally see the phone and SD card. after hours of frustration i think i found the issue. uninstall any USB drivers windows may have installed when u connected the phone and go get the installer from samsung. while in the settings menu on the phone under the developer section at the bottom make sure USB Debugging is turned off. then install the drivers plug the phone in after and let windows do its thing and bam ur done. full access to internal drive and SD if u have one installed
Had the same problem and finally found the solution on another forum site. There is a hidden setting that switches USB connectivity between USB Mass Storage and Samsung Kies. The only way to get to the setting is to create a shortcut on the Home screen as follows:
1. Press and hold an empty spot on the Home screen.
2. Choose Shortcuts
3. Choose Activities
4. Scroll down and choose USB Settings
Using the new shortcut you can now switch to Mass Storage mode and your phone will be recognized as a hard drive (even though Windows says it is a Portable Media player). Just double click on it in Explorer and you have access to both the internal memory and the SD card.
Note 2 usb
jow350 said:
Had the same problem and finally found the solution on another forum site. There is a hidden setting that switches USB connectivity between USB Mass Storage and Samsung Kies. The only way to get to the setting is to create a shortcut on the Home screen as follows:
1. Press and hold an empty spot on the Home screen.
2. Choose Shortcuts
3. Choose Activities
4. Scroll down and choose USB Settings
Using the new shortcut you can now switch to Mass Storage mode and your phone will be recognized as a hard drive (even though Windows says it is a Portable Media player). Just double click on it in Explorer and you have access to both the internal memory and the SD card.
Click to expand...
Click to collapse
How do you press and hold an empty spot on Note 2?
Because for my Note 2, when I press and hold the Home Screen, it will pop up with a box that you only can choose set wallpaper, apps and widgets or folder. SO how to choose shortcuts? Because it is not there?
Please help me. TQ
carlz_sky81 said:
How do you press and hold an empty spot on Note 2?
Because for my Note 2, when I press and hold the Home Screen, it will pop up with a box that you only can choose set wallpaper, apps and widgets or folder. SO how to choose shortcuts? Because it is not there?
Please help me. TQ
Click to expand...
Click to collapse
You can do that by installing a different launcher, for example nova launcher free version. Hope this method might work for you. But did not work on my note 2. I am also still looking for answer.
I'm having the same issue as you...and have tried everything as well...and am about to pull my hair out getting this to work.
The MSS install wizard is bogging down and is taking hours to install this for some reason...I am wondering if Samsung has borked this completely for Vista /XP..
I am open for suggestions
Mac
I've noticed Windows is not able to find the driver for it.
Try downloading the OEM USB driver from Samsung: http://www.samsung.com/us/support/owners/product/SGH-I317TSAATT
Disconnect the phone
Install the driver
Connect the phone
Let Windows look and install subsequent updates since the OEM version
Same Problem Here
Acyu said:
Whenever I connect my note 2 to my computer, it gives me a pop up message on my phone.
"Unable to find software on your PC that can recognize your device. Service pack 3, Windows Media Player, version 10 or higher, for Windows XP or Android File Transfer for Mac OS must be Installed.
Click to expand...
Click to collapse
I have the same issue and receive the same error message. But only on my Windows XP computers. All my Windows 7 computers work perfectly, but my 64gb SD card connects as a media device, instead of a mass storage device which I could assign a drive letter in XP>
I have tried installing Samsung's USB driver numerous times with no results.
So has anyone found a real solution to connecting a Note 2 SD card to an XP computer as a mass storage device just like any other cell phone I have ever had?
tlwalker1962 said:
I have the same issue and receive the same error message. But only on my Windows XP computers. All my Windows 7 computers work perfectly, but my 64gb SD card connects as a media device, instead of a mass storage device which I could assign a drive letter in XP>
I have tried installing Samsung's USB driver numerous times with no results.
So has anyone found a real solution to connecting a Note 2 SD card to an XP computer as a mass storage device just like any other cell phone I have ever had?
Click to expand...
Click to collapse
I am also having the identical problem. The Note 2 will not connect to any of the three computers I've tried regardless of the settings I've messed with. It used to connect fine and I'm not sure what happened, but now it just charges and registers nothing on the connected PC. Help.
Usb mass storage mode is pretty much gone at this point. Somewhere someone had the wisdom we only need ptp and mtp. I saw an app in the store that will mount external sd as ums. But that doesn't seem to help with the internal, nor do I know if it translates ext4 into something windows can read. :/
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html
This is crazy. I had a note 2 and it synced right away. It broke, I got a replacement and now I am getting the same errors.
Has anyone tried any different method
Has anyone tried any different method? Any solution?
I've been trying to transfer the files I took from my Galaxy S4 and saved them to my computer, to my G3. When I connect the G3 to my computer, I only see 2 files in the "Internal Storage". It won't recognize my SD Card either. Is there a setting I may be missing, that will allow me to see other folders? I can't copy and paste anything to my Internal Storage. Thanks for your help.
AnaMayShun said:
I've been trying to transfer the files I took from my Galaxy S4 and saved them to my computer, to my G3. When I connect the G3 to my computer, I only see 2 files in the "Internal Storage". It won't recognize my SD Card either. Is there a setting I may be missing, that will allow me to see other folders? I can't copy and paste anything to my Internal Storage. Thanks for your help.
Click to expand...
Click to collapse
Try airdroid from play store
jaythenut said:
Try airdroid from play store
Click to expand...
Click to collapse
Hmmm...I tried to upload the pics from my desktop and I get this message. "Failed to upload. No write permission on sd card."
I have to turn on the camera mode for it to transfer. It won't recognize anything in MTP mode. :/
I wish I could do all this without using AirDroid. It won't show the phone in MTP, but in PTP it will, but only 2 folders on the whole phone, no sdcard. And I can't directly put anything on the phone.
I had a problem with my D855 MTP mode as well. Folders are all there, but some files are either missing, or reduced in size. I cannot copy them out to PC. In these folders, I also cannot copy files into them. What I did to resolve the problem, is to reboot the phone with USB cable attached to the PC. Then, before the phone can complete its boot up sequence, I will have some time to copy the files in and out. It is really quite troublesome.
MTP troubles?
This is what's worked for me (D850/at&t):
Install LG United Mobile driver for ADB support
Enable USB debugging in developer options on phone
Verify MTP mode is selected
Connect USB and accept RSA signature on phone
I know that ADB isn't particularly necessary for MTP, but in my experience with roms on the old Nexus (for which I used Google's ADB driver), it was a sure bet every time. gl
crasher said:
I had a problem with my D855 MTP mode as well. Folders are all there, but some files are either missing, or reduced in size. I cannot copy them out to PC. In these folders, I also cannot copy files into them. What I did to resolve the problem, is to reboot the phone with USB cable attached to the PC. Then, before the phone can complete its boot up sequence, I will have some time to copy the files in and out. It is really quite troublesome.
Click to expand...
Click to collapse
ae10u said:
This is what's worked for me (D850/at&t):
Install LG United Mobile driver for ADB support
Enable USB debugging in developer options on phone
Verify MTP mode is selected
Connect USB and accept RSA signature on phone
I know that ADB isn't particularly necessary for MTP, but in my experience with roms on the old Nexus (for which I used Google's ADB driver), it was a sure bet every time. gl
Click to expand...
Click to collapse
Thanks for the suggestions guys. But it seems like my phone refuses to be recognized in MTP mode. And only partially recognized in PTP. I think I may have to do a hard reset this weekend. :/
I went back to Best Buy yesterday and returned my phone and got another one. And now my file transfers work. I guess I had a defective phone. I'm glad everything got back to normal.
I also had the problem that I didn't see my SDcard, but when I disabled debugging mode I suddenly could
What USB drivers can I install to connect my Windows 10 laptop to my Jiayu S3?
Any help much appreciated!
Toby
tobym said:
What USB drivers can I install to connect my Windows 10 laptop to my Jiayu S3?
Any help much appreciated!
Toby
Click to expand...
Click to collapse
Any clues, any one?
That´s a bit tricky. It depends what you are going to do and on what S3 Rom you are at the moment.
For KitKat Rom there are 2 USB Modi for the S3.
USB Storage : Direct connection to the SD card. Windows needs no driver.
MTP : Connection to internal S3 RAM and SD card. Windows needs driver. Look in optional drivers in Windows update for AyunOS driver.
This 2 modi can be chosed, when you connect the S3 viy USB wire.
For Lollipop ROM the USB Storage mode isn´t working right now.
For MTP you should find a driver in Windows update too, but i don´t use Win10.
Last but not least driver for SP Flashtool. SPF needs a special driver (VCOM-Driver). More tricky to install, but you can find information
and how-to on google and youtube.
1testi said:
That´s a bit tricky. It depends what you are going to do and on what S3 Rom you are at the moment.
For KitKat Rom there are 2 USB Modi for the S3.
USB Storage : Direct connection to the SD card. Windows needs no driver.
MTP : Connection to internal S3 RAM and SD card. Windows needs driver. Look in optional drivers in Windows update for AyunOS driver.
This 2 modi can be chosed, when you connect the S3 viy USB wire.
For Lollipop ROM the USB Storage mode isn´t working right now.
For MTP you should find a driver in Windows update too, but i don´t use Win10.
Last but not least driver for SP Flashtool. SPF needs a special driver (VCOM-Driver). More tricky to install, but you can find information
and how-to on google and youtube.
Click to expand...
Click to collapse
Thanks for replying! I have the stock OS, KitKat, so it seems like I should be able to connect - I think there must be a problem with my laptop in that case, I will have a look in device manager and event viewer and see if I can figure out what's happening.
Out of interest, what is the status of Lollipop on the S3?
Thanks!
tobym said:
Thanks for replying! I have the stock OS, KitKat, so it seems like I should be able to connect - I think there must be a problem with my laptop in that case, I will have a look in device manager and event viewer and see if I can figure out what's happening.
Out of interest, what is the status of Lollipop on the S3?
Thanks!
Click to expand...
Click to collapse
Do you hear the windows sound when connecting the S3? If not try a different USB port on the laptop.
There are 3 official Lollipop ROM right now. All 3 are good, with minor bugs. LL5.1 NewUI is for the chinese,
so a lot of chinese crap with it. I´m on Xtreme from TF right now for 3 days and pretty happy with it.
For more information read the last 20 pages of the monster thread above.
Ok, yes, I get the sound. Trying a different port does yield a slightly different result - if I connect in USB storage mode I see a new drive in Windows Explorer ("Removable Disk (E"), but if I try to open it Windows tells me to insert a disk. In MTP mode I see 'S3' in Explorer, and if I open that I see the phone memory and the SD card. This seems mostly ok, although it can get really slow.
tobym said:
Ok, yes, I get the sound. Trying a different port does yield a slightly different result - if I connect in USB storage mode I see a new drive in Windows Explorer ("Removable Disk (E"), but if I try to open it Windows tells me to insert a disk. In MTP mode I see 'S3' in Explorer, and if I open that I see the phone memory and the SD card. This seems mostly ok, although it can get really slow.
Click to expand...
Click to collapse
Ok, MTP is working good. If it´s slow, then your SD is slow.
For USB Storage : What file system do you have on the SD?
I don't actually know, is there an easy way to find out?
tobym said:
I don't actually know, is there an easy way to find out?
Click to expand...
Click to collapse
Jap, either you use an external partition manager or from windows "disk management".
Also you can left click the drive, right click -> properties -> also shows the type of partition.
If you don´t see a partition type under windows, chances are its a linux/android one.
Check it with Linux or download the app "aparted" from playstore, so you can check it
with the smartphone.
tobym said:
What USB drivers can I install to connect my Windows 10 laptop to my Jiayu S3?
Any help much appreciated!
Toby
Click to expand...
Click to collapse
I didn't install any drivers on Win 10 laptop, S3 (on KK) connects without any problem either with MPT or USB (only mSD visible) selected...
frulex said:
I didn't install any drivers on Win 10 laptop, S3 (on KK) connects without any problem either with MPT or USB (only mSD visible) selected...
Click to expand...
Click to collapse
I wonder if it's the file system type of my SD card, Windows Explorer shows nothing when I attach it via a USB adapter to my laptop?
Hi mates,
I have big issues with data transfer with my device. I wanted to do a backup of my files (Whatsapp and several folders). My System is Windows 10. When I connect my phone to my PC and choose "Data Transfer" on it I see my Pixel at the Explorer on my PC. Now when I try to drag and drop a folder to my PC it calculates the duration but nothing happens and then my Explorer crashes. Does anyone have the Same Issue? Sadly I cant remove the SD Card because there isn't one. How do you drag and drop big folders? Dragging single files works, but i cant drag 5000+ files at their own.
Tugix1 said:
Hi mates,
I have big issues with data transfer with my device. I wanted to do a backup of my files (Whatsapp and several folders). My System is Windows 10. When I connect my phone to my PC and choose "Data Transfer" on it I see my Pixel at the Explorer on my PC. Now when I try to drag and drop a folder to my PC it calculates the duration but nothing happens and then my Explorer crashes. Does anyone have the Same Issue? Sadly I cant remove the SD Card because there isn't one. How do you drag and drop big folders? Dragging single files works, but i cant drag 5000+ files at their own.
Click to expand...
Click to collapse
Hello,
Maybe a Windows driver problem?
Did it happen suddenly or it has always been this way?
Did you try on another computer?
Another USB cord?
Tried another phone to see if it transfers fine to the same computer?
Good luck...
Thanks for your advices.
Maybe a Windows driver problem? nope..
Did it happen suddenly or it has always been this way? always
Did you try on another computer? yes, same ****.
Another USB cord? Same ****
Tried another phone to see if it transfers fine to the same computer? all the nexus/pixel with solid storage does this.
I Try now Wondershare MobileGO, it's slow af but it works U don't have these Problems?
Tugix1 said:
Thanks for your advices.
Maybe a Windows driver problem? nope..
Did it happen suddenly or it has always been this way? always
Did you try on another computer? yes, same ****.
Another USB cord? Same ****
Tried another phone to see if it transfers fine to the same computer? all the nexus/pixel with solid storage does this.
I Try now Wondershare MobileGO, it's slow af but it works U don't have these Problems?
Click to expand...
Click to collapse
Hello, not at all...
File transfert is super fast. From Windows 10 to Pixel and from Pixel to Windows 10.
Can you try to uninstall the Pixel driver from device manager, also uninstall the device completely when plugged in... Then unplug and plug it back. Select transfert on the Pixel and let it update the driver.
Also, are you completely stock or is your bootloader unlocked? If unlocked, try booting TWRP.img and try transferring from here.
Good luck...
Same here. i actually made a thread about it a while back, cant find it though.
Speeds literally crawl to 256kbps some times!
Happens on my gaming machine, and my linux pc, on all ports, with both my cables. with the same setup i can get around 30-40mbps with my nexus 5x and 6.
i notice it happen more often transferring from pc to phone, but it happens consistently both ways. Ive tried with adb debugging, without adb, ptp and mtp, and all my drivers are synced up with google so they are the latest. i ended up setting wireless transfer up.
Super fast for me after 7.1.2
i agree MTP blows but after the update I moved 1.25gb of music in less than a minute using USB 3 connection.