I have a note 2(Tmobile) Falshed to the newest build of Illusion( cm10.1 rom,)
I can get custom boot animations fine, using the rom toolbox app, along with manually editing files using file explorer. The issue is even with the proper poweron.ogg file in the media/ui directory, the sound wont start on boot.
Im at a loss as to how to get a custom sound, even flashingcm10.1 stock boot animation through clockworld recovery yields a status 0 error.
Thread search here also nets no results along with google.
Hope someone can help out, thanks
Related
The phone was too loud when booting up (too loud to reboot when in school ) so I created an update.zip which disables the sounds at boot time - when the little android pops-up and later at the HTC logo (boot sound).
You should be able to install these whit the cyanogen's recovery image (copy the file to the /sdcard as update.zip, boot the recovery image, apply update.zip and you are done).
* file disable_boot_sound_update-signed.zip disables the boot sounds
* file enable_boot_sound_update-signed.zip reverts it to the stock (re-enables)
The process is done by replacing the /system/media/boot_animation.xml so if you have any custom boot animations/sounds this will possibly override/discard them. You have been warned
If anyone would contribute a new (better/different) boot sound, I can package it into an update.
WARNING: To disable boot sounds on a MoDaCo custom ROM versions 1.2-2.0 use the 1.5.1_bootscreens* files
To disable boot sounds on the 1.79.482.3 firmware or prior please use the disable_boot_sound_update-signed.zip.
Enjoy
Changelog
1.1
MoDaCo custom ROM ver. 1.2-1.5.1 support
1.0
Initial release
Nice... Maybe you can also change it to get and install bootsounds from the SD card? If no sound exist there, then it will be quiet..
If these files exist in /sdcard, use them:
/sdcard/popup.wav
/sdcard/htclogo.wav
Hmmm... must check how to do that with the update script... I know it could be done by a bash/shell script within the system (booted up/no recovery)...
It's actually only one file (boot.mp3) and there are also .gif files for screen animation.
Thnx for this i was so annoying to start the phone in quite places.
very good! it works! thanks dude!
felikz said:
very good! it works! thanks dude!
Click to expand...
Click to collapse
No problem. I am also planing to do it also for the 1.2-1.5 MoDaCo ROM and later for the 2.x branch update.
Sweet! You made my day! I've been trying to solve this and here's the solution. Thx!
I made this change for some weeks ago on my HTC Hero too, but what I made was to split the MP3 file and only keep the Android "blip" sounds when starting up, but removing the LOAD HTC sound. I love my change, it's great
If anyone wants it I've now attached it.
Hi there,
Im using the Sprint CDMA Hero and just put the newly released 'Fresh' Rom on it.
Is there any way you could either make a flash/zip file to disable its sounds or explain how I can create one?
Really appreciate it.
Hi, after installing CoreDroid ROM, I wanted to change boot and down animation to stock version, so I extracted needed files from backup ("bootanimation.zip" and "downanimation.zip"), opened Root Explorer, turned on R/W mode, and replaced that files in "data\local" folder. Now, boot animation works, but down animation doesn't (as said in title).
I don't know what's problem, can someone help me? Thanks in advance!
EDIT: I have solved problem - I followed this tutorial and copied file via ADB: http://forum.xda-developers.com/showthread.php?t=942976
I have asked previously on how to enable sound on custom boot animations and was told to just paste the ogg sound file in the corresponding system/ui folder but even after doing that the sound still does not work is there something I'm missing? I have even tried changing the file permissions to match all the other system files (rw-r-r) if that even does anything.
I would like to enable boot sound because there are several custom boot animations that have great accompanying sounds, but since basically every custom rom disables bootup sound I cant enjoy the hard work that was put into making these awesome custom bootups
Hey all,
So I tried adding a custom boot animation to my phone, and now all I get is a black screen with the stock sound playing.
Basically what I've done was:
Rooted my device using Super SU
Installed Busy Box
(Copied to my external sd card: bootsamsung.qmg bootsamsungloop.qmg)
Did this tutorial: http://forum.xda-developers.com/show....php?t=2063280
And that's when things went wrong.
I believe, (based off the files used in the tutorial), that the problem may be in/with the following:
/system/bin/bootanimation (exe)
or
/system/bin/samsungani (exe)
or
/system/bin/sh (text file)
I've tried adding the original .qmg files back but it hasn't worked.
I'd like to end up with a custom animation, but at this point I'll be happy with any animation.
Any help would be amazing.
CWM method to Change Splash Boot (Screen Before Bootanimation)
Disclaimer; I am not responsiable for bricked devices, dead SD card !!!
1. download SGS2_custom_param_lfs_cwm.zip.
2. copy to sdcard.
3. flash SGS2 _custom_param_lfs_cwm.zip via cwm.
4.after flashed reboot your phone and will see "logo.jpg draw fail" green message.(it is ok!):good:
5.rename custom image to "logo" and copy to sdcard.(Custom Image !!! 480x800 and max size 100 kB JPEG image)
6.copy new custom image "logo" with Root Explorer / File Explorer / ... .to /mnt/.lfs/ and Set Permission . (see attached image; "0777")
7.reboot your phone and you see New Boot Splash Screen.:laugh::good:
NOTE; if you want to back original flash SGS2_stock_param_lfs_cwm.zip
-attached my logo collection(extract and rename "logo")
Thanks to
-connexion2005 ;custom_param
- shinyu ;cwm zip.
download;
-SGS2_custom_param_lfs_cwm.zip.
https://drive.google.com/file/d/0B8wCcf9dgYXuRUItZllMVUJ3cFk/view?usp=sharing
- my logo collection
https://drive.google.com/file/d/0B8wCcf9dgYXuVldDaDBKdFpKUU0/view?usp=sharing
- SGS2_stock_param_lfs_cwm.zip
https://drive.google.com/file/d/0B8wCcf9dgYXuVjRsRGdXWmZSWWs/view?usp=sharing
Deleted
logo.jpg draw failed
Thanks for the tutorial! I'm pretty sure I'm the one doing something wrong but I can't figure out what.
I was able to flash the param file, both the cwm way and through odin which resulted in "logo.jpg draw fail.." so that part works, but adding my image doesn't work. I've tried several different images, including yours and changed the permissions accordingly but it just doesn't seem to take it. It boots fine though. I've done this before, about a year ago and it worked fine then so I'm wondering if it has to do with my partitioning or that I've updated to marshmallow recently (the battery charging animation changed after upgrade, did something else change too perhaps? Does this tutorial not work any more after update?)
Anyway, if you have any tips, I'd appreciate it.
is this applicable to Marshmallow (CM13)?
@alexbokor40, same issue with @luvis, after flashing the zip, able to get the "logo.jpg fail" but after copying the logo.jpg to the .lfs folder, set the right permissions and reboot, nothing happens. i'm on CM13 official and also has custom pit. I also notice when i open the .lfs folder in root explorer, i can't see the other files inside of it. last time when i was on 4.1.2, i able to see the other files.
any tips will be highly appreciated mate.
It is called bootlogo
It doesn't work on android 7.0 nougat. I didn't find nay file at /mnt/.lfs/
And i didn't get the green message "logo.jpg draw fail" after flashing via twrp 3.0.2
Do you have another method?
is there a way to do that through build.prop? has anyone tried? the param.ls way here seems to fail. in my s2 with cm 13 the bootlogo is not removed, flashing with odin.