Hello,
Is it possible to get an A2DP headset to work with Skype? I've upgraded my bluetooth stack on my Alpine and my i-tech blueband works fine with the HQ audio and will allow hands-free use, but I can't work out how to get Skype to use the headset instead of the built-in microphone and speaker...
Any ideas?
Thanks,
Tim
I have the exec and I found that it works for me when i go to setting - voice spped dial -application - skype (assign voice dial to turn skype on) . Then I found that i can use skype with my earpiece bluetooth. (and also ise it as headphones for other programs).
Hi,
I am looking for a way to stream audio from the Touch HD to my Car. Unfortunately the cars built-in audio system doesn't support bluetooth. But there is that handsfree-thing, which works really great with calls. So I wondered, if there is a software solution that streams my music from the phone as "incoming call" to my car?
I've tried "acbToggleBT" and "BTASP" and both didn't work in the Car, but they did work with a bluetooth headset.
It would be really great if somebody knows, finds, posts, programs or has an solution.
Thanks in advance!
Greets from Bavaria, Germany
berkley
I can't remember but there was an option to route normal audio to the bluetooth handset in my HP iPAQ which is missing from HD.
Believe me music streaming to HSF device will be as good as listening to AM radio on poor reception. Go get a bluetooth A2DP profile audio headunit like Sony - MEX-BT2500 (this is the one I use and works like a charm).
Thanks for your reply.
Perhaps I took the wrong words to explain what I am looking for.
The thing I want is a piece of software that "imitates" an incoming call and sends the audio from S2P to the handsfree of my car.
Maybe this explanation is a bit better...?
[edit]
have you tried BT Audio
it's a paid app
acbToggleBT always worked for me
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
camro said:
try this
There are 3 apps
btaudio on
btaudio off
bttoogle (on/off)
i made a cab file for it
Click to expand...
Click to collapse
Excellent. I can get this to work via bluetooth headset.
Unfortunatley this didn't work in my car (which is what I believe the OP wants).
http://220.232.214.116:8088/attachmentes/Day_071224/31_270270_b7dcc_pxdxa.btaudio.zip
I use this application, works terrific!!.......enjoy
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
binning said:
ausi - does this work on a car stereo i.e. does it emulate an incoming phone call?
Click to expand...
Click to collapse
All i can say is this based on using it on my HD with WM 6.1 & 6.5 (Dutty ROM):
Once you install the program and then execute it (Press On):
It will transfer all Music & Audio from Movies (Core Player) etc. to my BT Nokia Headset or my BT Car Speakerphone (Motorola T305), i do not have a Radio BT set so i can't tell you, you'll just have to try.
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Hi Ausi, tried on my Nokia BT car handsfree but no joy
The handsfree only accepts an incoming call as stated above so some sort of emulation may be needed. Would be happy if someone knew about something...
ausi said:
This Cab solved my problem as the basic BT HD ROM sertting only transfers the Phone audio while this little cab transfers ALL audio, so i would presume that it may help you with your BT radio, you can always uninstall the cab if it doesn't work for you.
There is NO emulation invloved here!!??
Good luck!
Click to expand...
Click to collapse
Funny... my HD does the reverse. I get de BT audio but on the BT phone I got nothing but static...
I've got a Sony Xplod bluetooth radio in my car.
When I start up it automatically connects to my HD, however it only connects as handsfree rather than both handsfree and BT stereo.
I have to go into comms manager and bluetooth settings, then select and hold on the xplod in the device list.
A menu comes up asking what I'd like to connect as, and I pick stereo, then repeat for handsfree.
Give that a go. Holding on the device to bring up the menu gives you the BT profiles the device is capable of, so with a bit of luck stereo/headphones will be an option for you.
Since I've installed the new official rom for my TP2 I cannot browse my contacts anymore via my car screen.
Normally when I connect my phone with my car via BT, the carkit syncs the contacts so I can browse them via my steering wheel.
Now it says that nothing has been registered...
But when I disable bt on my phone and enable it again... after a minute I can see my phonebook again on the carscreen...
What is changed on bt level for the new ROM???
Anyone?????
Anyone?????
Same here
I have had issues with a Volvo car kit since day 1. (And my TomTom, etc.) The position has got slightly worse since the WM6.5 update. HTC support originally said they were aware of Bluetooth problems (the TP2 has a different stack from preceeding machines). They are sort of backing away from that now - latest e-mail from HTC support says 'it is being looked into'. There are lots of similar issues being reported here and in other user fora.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Kimbo,
when you update to the new ROM, your car may think it's a brand new phone... try deleting all previously paired phones from your car, then start the pairing process over again... your car should ask if you'd like to sync phonebooks again... that's what mine did when I re-paired after my 6.5 update.
Good luck - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit.
I am interested in using the Blackberry Bluetooth Gateway (with my TP2) to stream A2DP music and my navigation app voice instructions to my RV stereo using the 3.5mm aux output on the Blackberry Bluetooth Gateway.
I don't actually own the Blackberry Gateway yet, so if there is a better product, let me know.
Question is, can I use the Gateway bluetooth for the A2DP streams and still send/receive calls on my Jawbone Prime headset at the same time.
I know that the A2DP audio will not continue when I am on a call. That is fine. But can I maintain connections to 2 bluetooth devices simultaneously, one for A2DP and one for phone calls?
Was just messing about with the phone to see if i could and it worked perfectly. Not sure about two different audio devices but you can use 2 bluetooth devices at the same time.
i have been able to use an external bluetooth gps reciever (with tom tom 7) and my bluetooth headset at the same time.
I have a Bluetooth Handsfree Loopback with Malaysk 8.1 Rom included Bluetooth App on PX5.
Caller hears himself, I hear nothing.
Are there other Bluetooth Phone Apps I may be can set the Audio Channels manually?
I mean Bluetooth seems to work If caller Voice is rooted back to him Bluetooth in and Out
and Speaker and Mike work fine with Maps, Speak recognition and Answers spoken back, Music etc.
Probably only the different Bluetooth / Audio Channels are not properly connected.
No Tips about other Blutooth Phone Apps or Bluetooth Channel routing?