Develop Bugs

[ROM][7/10][UCALEM][AROMA] Ultimatum S3 1.1 **Features you always Wanted**

Closed for now.

Saved
im on my phone. expect terrible typos.

And again
im on my phone. expect terrible typos.

Nice! Downloading now thank you howtomen! :good:

sweet, cant wait to test drive.:laugh:
is dl link working for others?

darren.wlsn1 said:
sweet, cant wait to test drive.:laugh:
is dl link working for others?
Click to expand...
Click to collapse
Tested myself works fine
im on my phone. expect terrible typos.

howtomen said:
Tested myself works fine
im on my phone. expect terrible typos.
Click to expand...
Click to collapse
ty, i will refresh and try again.
there we go, dl went fine.

going to give this a try. Thanks

can't flash right now to check but is the native tethering enabled to work around the HTTPS check? (aka If I don't pay for tethering should it still work on the native app?)
thanks in advance.

How do I get scroll-able wallpapers working?

FRuiTBoOT said:
How do I get scroll-able wallpapers working?
Click to expand...
Click to collapse
It should be enabled by default in tw launcher... shouldnt require anything
im on my phone. expect terrible typos.

Sweet thanks howtomen downloading now
Sent from my SGH-T999 using xda premium

Downloading now....

Anybody else having problems getting this to boot? Going to try and redownload and see if that's the issue (although, it goes through the install process with TWRP just fine).
Edit. Just noticed the "ChromeFix". Checking to see if that could be the issue.
Update. Chromefix was not the answer to my problem. Get systemUI and com.android.phone FC's and can't do anything. On to try the freshly downloaded copy.
Update 2: Redownloaded via PC, transferred to SD card via PC/card reader, attempted to install, still a no go. Same results. Anybody know if this is actually flashing a kernel? Wondering if it's due to the adama kernel I had installed.

How does this work with Aroma? Is there a touch recovery I'm not aware of?

pieces of cake said:
How does this work with Aroma? Is there a touch recovery I'm not aware of?
Click to expand...
Click to collapse
There's a TWRP released for the GSIII. Aroma worked fine with it for me for installing. . . just gotta get it to boot now.

Why does the phone have AT&T?
Why does the description say "Removed All ATT references"?
Wrong thread?

HG! said:
Why does the phone have AT&T?
Why does the description say "Removed All ATT references"?
Wrong thread?
Click to expand...
Click to collapse
this is originally based on AT&T version of SGS III it says on the OP then it says T MOBILE support
meaning we can flash this rom as well!!!

Mi|enko said:
There's a TWRP released for the GSIII. Aroma worked fine with it for me for installing. . . just gotta get it to boot now.
Click to expand...
Click to collapse
Do you have a link for us please? Thanks!

pieces of cake said:
Do you have a link for us please? Thanks!
Click to expand...
Click to collapse
Pretty sure I got it from RootzWiki. That said, I think I saw a post where we weren't supposed to link to them? Go to RW and look in their GSIII area though. You'll find it.

[Q] Unable to use custom Roms

Everytime i attempt to flash a custom rom it works perfectly except my baseband disappears this happens on all roms i am on the official ics rom any help is greatly appreciated thanks in advance
Samsung Captivate Glide Att ICS

Cory_branch said:
Everytime i attempt to flash a custom rom it works perfectly except my baseband disappears this happens on all roms i am on the official ics rom any help is greatly appreciated thanks in advance
Samsung Captivate Glide Att ICS
Click to expand...
Click to collapse
Which version of CWMR are you using ? Does it flash properly or shows you any error message while flashing ?

ninthsense said:
Which version of CWMR are you using ? Does it flash properly or shows you any error message while flashing ?
Click to expand...
Click to collapse
liquid smooth if i understand the question
no errors its liquid smooth then you look theres no signal and in about phone it says unknown if i remember correctly
the rom im trying to get is liquid smooth by the way

Cory_branch said:
liquid smooth if i understand the question
no errors its liquid smooth then you look theres no signal and in about phone it says unknown if i remember correctly
the rom im trying to get is liquid smooth by the way
Click to expand...
Click to collapse
I meant the version of Clock Work Mod which you use to flash the ROMS. You need to do some more reading if you still can't figure what is CWM..

ninthsense said:
I meant the version of Clock Work Mod which you use to flash the ROMS. You need to do some more reading if you still can't figure what is CWM..
Click to expand...
Click to collapse
Sorry for being such a noob but i honestly cant remember right now as my brother helped me with majority of it

Cory_branch said:
Sorry for being such a noob but i honestly cant remember right now as my brother helped me with majority of it
Click to expand...
Click to collapse
install from zip

Cory_branch said:
install from zip
Click to expand...
Click to collapse
Yup, install from zip. The software is called CWMR. Can you try flashing the covenant kernel from the dev forums http://forum.xda-developers.com/attachment.php?attachmentid=1569628&d=1355715788

ninthsense said:
Yup, install from zip. The software is called CWMR. Can you try flashing the covenant kernel from the dev forums http://forum.xda-developers.com/attachment.php?attachmentid=1569628&d=1355715788
Click to expand...
Click to collapse
I can try it since its just flashing so flash rom gapps plus the kernel

Cory_branch said:
I can try it since its just flashing so flash rom gapps plus the kernel
Click to expand...
Click to collapse
yup and watch for any error's while flashing. Are you sure you were on ICS and what was the baseband it was showing then ?

Cory_branch said:
I can try it since its just flashing so flash rom gapps plus the kernel
Click to expand...
Click to collapse
the baseband is I927UCLJ3 and i dont remember if my brother unrooted my phone or not what should i do ps its 2 am????

Cory_branch said:
the baseband is I927UCLJ3 and i dont remember if my brother unrooted my phone or not what should i do ps its 2 am????
Click to expand...
Click to collapse
Just flash the jb rom and kernel. Reboot and see if you get the network. If not then revert to your ICS, until you can try again and provide logcat..

ninthsense said:
Just flash the jb rom and kernel. Reboot and see if you get the network. If not then revert to your ICS, until you can try again and provide logcat..
Click to expand...
Click to collapse
Reflash gapps also right

Cory_branch said:
Reflash gapps also right
Click to expand...
Click to collapse
right

ninthsense said:
right
Click to expand...
Click to collapse
i noticed something should i flash that leak 3.0 liquid fixes along with the original file gabbs and kernels
the process just finished and i still have no service restoring

Cory_branch said:
i noticed something should i flash that leak 3.0 liquid fixes along with the original file gabbs and kernels
the process just finished and i still have no service restoring
Click to expand...
Click to collapse
Nope doesn't matter. Restore back to ICS...
Sent from my SGH-I927 using xda app-developers app

ninthsense said:
Nope doesn't matter. Restore back to ICS...
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
View attachment 1610354
View attachment 1610355
here are the pictures you asked for and is there anyway that u can help with logcats???

Cory_branch said:
View attachment 1610354
View attachment 1610355
here are the pictures you asked for and is there anyway that u can help with logcats???
Click to expand...
Click to collapse
I would suggest you to stick to ICS for now, as no baseband can be quite major issue. Search the forums to find out how to provide logcat...
I would also suggest a backup of the EFS before you play anymore with flashing ROM's etc. There is a sticky in the dev threads for the same.

Cory_branch said:
View attachment 1610354
View attachment 1610355
here are the pictures you asked for and is there anyway that u can help with logcats???
Click to expand...
Click to collapse
Before you flash are you wiping data, cache, and dakvik, and formatting system? These are required.
Sent from my SGH-I927 using xda premium

dman3285 said:
Before you flash are you wiping data, cache, and dakvik, and formatting system? These are required.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
True that. I assume he was doing that of course can't be sure

ninthsense said:
True that. I assume he was doing that of course can't be sure
Click to expand...
Click to collapse
i did i have a list to follow

Android 4.3 on Korean Note 2?

Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!

Any links?
Sent from the TermiNOTEr 2!

borijess said:
Any links?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Here is a screenshot of my system.

razvan11malancus said:
Here is a screenshot of my system.
Click to expand...
Click to collapse
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!

borijess said:
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Yes. My actual ROM is 4.1.2. I have tried Jedi X19 (4.1.2) and also BeanStalk, Illusion, CM 10.2 (4.3), with the same result. Stuck at boot screen logo.

Ni hao
razvan11malancus said:
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Click to expand...
Click to collapse
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2

cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.

Vibration issue
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!

razvan11malancus said:
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
Click to expand...
Click to collapse
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872

cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
razvan11malancus said:
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Click to expand...
Click to collapse
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels

Rajaasim1980 said:
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Click to expand...
Click to collapse
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.

cbeta1111 said:
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
Click to expand...
Click to collapse
Thanks a lot man! It works now!

razvan11malancus said:
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
Click to expand...
Click to collapse
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?

This is dev forum, not Q&A. All questions should go in questions forum.

Rajaasim1980 said:
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
Click to expand...
Click to collapse
Hi. It should definitely work with TWRP recovery as it installs like a normal zip file ROM.
The update script file is located in the ROM. You have to unzip it and go to that location as I have said in the anterior post.
Call recording works but I did not figured yet how to play the file after it is saved. It saves the file as a .3gpp but I think the problem is with Android 4.3 codecs.
EDIT: It works if you try to play it from the built in file manager. Not with Root Explorer. Do not know why.
Multiwindows work great in PAC-MAN ROM:

TheATHEiST said:
This is dev forum, not Q&A. All questions should go in questions forum.
Click to expand...
Click to collapse
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.

razvan11malancus said:
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
Click to expand...
Click to collapse
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?

TheATHEiST said:
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
Click to expand...
Click to collapse
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2

Rajaasim1980 said:
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Errr I did! and they have!!!!!
Doesn't mean I cant voice my opinion (Same as you did) as well as report post!

[ROM] MetroPCS Samsung Galaxy S4 SGH-M919N UVUAMF2 Rooted/Deodexed [ROM]

--------------------------------------------------------------------------------------
[ROM] MetroPCS Samsung Galaxy S4 SGH-M919N UVUAMF2 Rooted/Deodexed [ROM]
ARocker said:
!!!This Rom is for the MetroPCS Samsung Galaxy S4 SGH-M919N!!!
Please backup your phone before flashing this!
Flash at YOUR own risk!!
I'm not responsible for anything you do to/with your phone.​
Click to expand...
Click to collapse
Code:
[center][b]
Post One : Rom Information
Post Two : Link To Download
Post Three : Reserved[/b]
[/center]
---------------------------------------------------------------------------------------
ARocker said:
This is a M919NUVUAMF2 4.2.2 Rom for the MetroPCS Samsung Galaxy S4 SGH-M919N
with minor modifications and only the modem and MyExtras_TMO.apk removed.
I built this Rom to hopefully kick start a little development for the M919N.
Please use it as a base with which to create Roms, Themes and Mods from our firmware.
Its also great for M919N users who want a fully working rooted and deodexed stock Rom
with only minor modifications that you can flash in recovery.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
!!!Attention!!!
ARocker said:
I tested this Rom a bunch on my M919N but could use a few more willing testers to confirm that it works as it should.
​
Click to expand...
Click to collapse
!!!Attention!!!
ARocker said:
Please be aware if you are currently running a Tmobile Rom and then flash this Rom, you MAY run into the "Prevention Notification" issue. The current fix is to go to this thread Unofficial M919NUVUAMF2 Working!!!! and Odin the phone back to a 100% MetroPCS stock state, then install recovery of your choice, then flash this Rom.
​
Click to expand...
Click to collapse
!!!Attention!!!
ARocker said:
Please be patient and let it boot!! The first boot can take up to 5 minutes, so be patient and wait for it!!
​
Click to expand...
Click to collapse
!!!Attention Developers!!!
ARocker said:
All I ask is that you let me know that you're using the Rom and a mention in your thanks.
​
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------
!!!Specifications!!!
Code:
[center]
Android OS version : 4.2.2
Model : SGH-M919N
CSC version : M919NTMBAMF2
Rooted (Superuser app + su) : YES
Rooted (unsecured boot.img) : YES
BusyBox installed : YES
BusyBox init.d support : YES
Bash support : YES
system/framework is deodexed : YES
system/app is deodexed : YES
[/center]
??Installation Process??
Code:
[center]
-Download ROM, then copy to EXTERNAL SD card
-Boot to recovery
-Factory reset
-Flash ROM
-Reboot
[center][b]Please be patient and let it boot!!
The first boot can take up to 5 minutes,
so be patient and wait for it!![/b][/center]
[/center]
---------------------------------------------------------------------------------------
!!!Thanks!!!
ARocker said:
Thanks to dsixda for his Android Kitchen!
Thanks to lokeshsaini94 for his [GUIDE][how to] CREATE OWN ROM thread!
Thanks to danyvw, techguy1214, exel, dulal18 and anyone else having anything to do with the M919NUVUAMF2.tar that I used to build this!
Thanks to nuttmeg for posting a mirror download location when my DB quit!
Special Thanks to Shabbypenguin!
Special Thanks to testers: danyvw, nuttmeg....
Thanks to all of our contributors!​
Click to expand...
Click to collapse
If YOU would like to thank ME for this, you can do so by hitting the THANKS button!
---------------------------------------------------------------------------------------​

Download
------------------------------------------------------------------------------------------
!!!This Rom is for the MetroPCS Samsung Galaxy S4 SGH-M919N!!!
Download:
Deodexed_Rooted_M919N_MF2.zip
------------------------------------------------------------------------------------------
If YOU would like to thank ME for this, you can do so by rating the thread and hitting the THANKS button!
​

Reserved

arocker said:
Reserved
Click to expand...
Click to collapse
Nice job ARocker nice to see good people out here :good::good:

mike28 said:
Nice job ARocker nice to see good people out here :good::good:
Click to expand...
Click to collapse
Thanks mike, I really appreciate it

Nice...
Great work!!!

nuttmeg said:
Nice...
Great work!!!
Click to expand...
Click to collapse
Thanks, old sport
I watched Gatsby recently lol

Hey I Know You Guys What Up Fellas....
Sent from my SGH-M919 using Tapatalk

Nice rom, but the only thing I had a problem with rom is the WiFi not working.

Im sorry about that. You're the only one to report this so far. Try installing again please. Thanks
Sent from my SGH-M919N using Tapatalk

I did 3 times and still doesnt work.. I get this message every time I try to turn on the wifi.
Sent from my SGH-M919N using xda app-developers app

helloyoufool said:
I did 3 times and still doesnt work.. I get this message every time I try to turn on the wifi.
Sent from my SGH-M919N using xda app-developers app
Click to expand...
Click to collapse
Thanks for the screenshot, that helps a lot.
Please go to "settings/more/about device" and check the build number and the baseband version. They should be the same version.
If they are not the same, that is what is causing the "prevention notification" you are getting. Most likely the result of going from a Tmobile Rom to this MetroPCS Rom. They each have different basebands. There are two possible fixes I've read about.
The first is the easiest, just flash the Tmobile rom you were using before. That should take care of the wifi and "prevention notification" and different baseband issues. This means you cant use this rom though.
The second is more time consuming but if you really want to get this metroPCS Rom running this is what you need to do:
Go to this thread Unofficial M919NUVUAMF2 Working!!!! and follow the directions to return the phone back to MetroPCS 100% stock via Odin.
Then install the recovery of your choice, OUDHS, TWRP, CWM, whatever you prefer.
Then flash this Rom again.
Let me know how it works out.

edgeez25 said:
Hey I Know You Guys What Up Fellas....
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
What up...TRAITOR!!!
LMAO :laugh::laugh::laugh: JK
Good to hear from ya edgeez!!! Stop by the old forum once in a while!

arocker said:
What up...TRAITOR!!!
LMAO :laugh::laugh::laugh: JK
Good to hear from ya edgeez!!! Stop by the old forum once in a while!
Click to expand...
Click to collapse
Lol.. Had to... easier to make payments than shell out the 5 bills ... I do go lurk around bro
Sent from my SGH-M919 using Tapatalk

arocker said:
Thanks for the screenshot, that helps a lot.
Please go to "settings/more/about device" and check the build number and the baseband version. They should be the same version.
If they are not the same, that is what is causing the "prevention notification" you are getting. Most likely the result of going from a Tmobile Rom to this MetroPCS Rom. They each have different basebands. There are two possible fixes I've read about.
The first is the easiest, just flash the Tmobile rom you were using before. That should take care of the wifi and "prevention notification" and different baseband issues. This means you cant use this rom though.
The second is more time consuming but if you really want to get this metroPCS Rom running this is what you need to do:
Go to this thread Unofficial M919NUVUAMF2 Working!!!! and follow the directions to return the phone back to MetroPCS 100% stock via Odin.
Then install the recovery of your choice, OUDHS, TWRP, CWM, whatever you prefer.
Then flash this Rom again.
Let me know how it works out.
Click to expand...
Click to collapse
Is there a flashable zip to install the metro PCS radio? That to will change your baseband
Sent from my SGH-M919 using Tapatalk

LoopDoGG79 said:
Is there a flashable zip to install the metro PCS radio? That to will change your baseband
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thanks for your help and you are absolutely correct! Unfortunately there's no radio zip to flash for our phone and I have yet to make one. I'm no dev, I just follow directions reasonably well. I have yet to find a guide to make a flash-able radio zip and honestly, I'm working on something else at the moment, so I haven't really looked. For now, the fix I gave is the only fix for this issue. In the future that will probably change. Thanks again for your assistance

I see a lot of familiar folks here. Nice work Arocker:good:

idiot
im an idiot
but thanks for this jaja
could you maybe put up how you rooted the s4 to install the recovery? i tried the tmobile one and it bricked my phone

robcop19 said:
im an idiot
but thanks for this jaja
could you maybe put up how you rooted the s4 to install the recovery? i tried the tmobile one and it bricked my phone
Click to expand...
Click to collapse
Hi Robcop,
Tmobile TWRP is what I use too, though there are versions that dont work properly for our phone.
Version 2.5.0.2 is definitely working for our phone.
Why dont you stop by here:
http://androidforums.com/metropcs-galaxy-s4-all-things-root/
Its a place for the MetroPCS S4
Check out the posts, including a thread that walks you through installing a recovery and easy rooting.
I look forward to seeing you there. Say hello when you do.

strange things are happening
I never had this problem before, I have downloaded the zip 4 times thinking I did something wrong with the process as simple as it is .lol
Used the stock my files app to copy the zip to the 64gb external sd card and even this last time I created a couple folders and put it in there although when I boot to recovery and factory reset then chose zip fromexternal sd card its not there and whats weird even more is I see an older file that I have deleted several times back again, its the root_zip I used with odin to originally root the device. Crazy huh I think the sd card must be damaged.

Sprint Testers for rom 4.3 aosp

I most likely won't continue support since i'm a canadian g2 person. but i'd like to kick it off for someone that wants to continue..
I need some testers for the Sprint ls980 G2. right now i just have Carbon 4.3 aosp
I don't know if you guys are root yet or have recovery.. but TWRP with loki is what u would need to work properly
TEST ROM HERE

Yes you got me I'm in.. so hopefully this week ..
Sent from my SPH-L710 using XDA Premium 4 mobile app

Great rom
houstonn said:
I most likely won't continue support since i'm a canadian g2 person. but i'd like to kick it off for someone that wants to continue..
I need some testers for the Sprint ls980 G2. right now i just have Carbon 4.3 aosp
I don't know if you guys are root yet or have recovery.. but TWRP with loki is what u would need to work properly
Click to expand...
Click to collapse
This has worked wonderfully for me,
i find that it wont connect to data untill i go into the dialer and enter *#*#DATA#*#* once
so far no bugs that i can tell.......:fingers-crossed:
will report after i take it for a spin.
and do you mind if i post a link for this rom in the Sprint LG G2 Dev section? or maybe have the Mods move it to the right section?
ill se if i can put a request for this thread to be moved, this is great work.
i'm not a dev but i can post a tutorial on how to get it working of the Sprint G2 if you would like

Im eager to try this out by the way does it have rotation issues after trying cm10.2 i have rotation issues

Issues found
Okay been running this for about a week now and this is what I found so far:
-MMS doesn't work, I receive notifications for them but never download
-Wifi and bluetooth are buggy, toggles from the Quick Settings menu tend to get stuck after 2-3 toggles and require a reboot to fix
-Dialer doesn't pick up touches sometimes
-NFC gets stuck in on position and causes massive wakelocks. I ended up disabling NFCService and Tag Service to stop the issues
-Mobile Networks Section has GSM settings in it
-Flash seems disabled in AOSP Camera app
-Rotation issues like other AOSP roms
Besides that though the ROM is surprisingly usable for being one of the few roms available for the Sprint G2, I would definitely like to see your build code since it looks 90% in working condition.

I flashed and it booted and stuck on carbon logo.
Am I missing the gapps file?
Sent from my LG-LS980 using xda app-developers app

centro714 said:
I flashed and it booted and stuck on carbon logo.
Am I missing the gapps file?
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
Yes but it should work without gapps go into the Verizon PA 4.3.1 and get those gapps. Did you wipe?

chris0160 said:
Yes but it should work without gapps go into the Verizon PA 4.3.1 and get those gapps. Did you wipe?
Click to expand...
Click to collapse
I did not wipe.. Will try again after I find gapps file. Can anyone provide a link to download? Can't seem to find it.
Sent from my LG-LS980 using xda app-developers app

centro714 said:
I did not wipe.. Will try again after I find gapps file. Can anyone provide a link to download? Can't seem to find it.
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
usually the culprit of not wiping. its a given that you need to wipe every time you switch roms especially from stock to custom rom.

Just wiped and successfully flashed this ROM... so far awesome!
Still missing a few things that i'm thinking the 4.3.1 Gapps file will fix.. So can anyone provide me the link to download that file??? pleeasse!!

centro714 said:
Just wiped and successfully flashed this ROM... so far awesome!
Still missing a few things that i'm thinking the 4.3.1 Gapps file will fix.. So can anyone provide me the link to download that file??? pleeasse!!
Click to expand...
Click to collapse
Google it.... its something YOU can easily find.

x714x said:
Google it.... its something YOU can easily find.
Click to expand...
Click to collapse
i've tried, that's why i'm asking here... I don't want to flash the wrong gapp file.
I found this:
https://plus.google.com/107979589566958860409/posts/QEnJ25VanKN
Is this the right file?

To fix MMS, all the settings are found here to put the correct APN settings to get it up and working. http://buzzmobile.us/sprint-apn-settings-android-us/

x714x said:
Google it.... its something YOU can easily find.
Click to expand...
Click to collapse
You're cool!!

leroybrute said:
You're cool!!
Click to expand...
Click to collapse
Normally I get really ticked off with people saying to Google it, but seriously, it's freaking Gapps....It's literally the easiest thing to find in the entire Android development universe. I Googled 5 letters, and it was the very first thing that came up, or second(if you want goo.im directly).....

Koopa777 said:
Normally I get really ticked off with people saying to Google it, but seriously, it's freaking Gapps....It's literally the easiest thing to find in the entire Android development universe. I Googled 5 letters, and it was the very first thing that came up, or second(if you want goo.im directly).....
Click to expand...
Click to collapse
Get more out of the post, if you answer or help and then post the rude but obvious.

leroybrute said:
Get more out of the post, if you answer or help and then post the rude but obvious.
Click to expand...
Click to collapse
http://lmgtfy.com/?q=gapps
Click the second link, click the one for 4.3.0.

centro714 said:
i've tried, that's why i'm asking here... I don't want to flash the wrong gapp file.
I found this:
https://plus.google.com/107979589566958860409/posts/QEnJ25VanKN
Is this the right file?
Click to expand...
Click to collapse
Thanks to those that helped me out... I have a new g2 and wanted to install the right file. I have no idea what a gapp file is, let alone what it does. Better be safe than sorry.
Anyhow, the link I provided worked for those that are in my boat.
To the OP, this is a fantastic ROM. Thank you very much.
Sent from my LG-LS980 using xda app-developers app

Koopa777 said:
http://lmgtfy.com/?q=gapps
Click the second link, click the one for 4.3.0.
Click to expand...
Click to collapse
Wasn't aimed toward your post. And I don't need the file.

Running great
Sent from my LG-LS980 using XDA Premium HD app