I'm looking for a universal sleeve (like with BlackBerrys) that fit the Captivate. The inner material has to be really soft, so as not to scratch the phone (obviously). Does anyone know of an easily obtainable and inexpensive product that meets this description?
Is this () what you may be looking for? I had bought this for the Samsung Blackjack II. It fits the Captivate nice and snug too. Samsung branded, good quality, its on Amazon for $6.46.
If the link does not show up in this post put a general search on Amazon for "Samsung i607 Blackjack Flat Lthr Pouch".
I got the neoprene case on ebay for the htc evo
hxxp://cgi.ebay.com/Original-Neoprene-Case-Pouch-HTC-EVO-4G-4-G-/280537161004?pt=PDA_Accessories&hash=item4151515d2c
it fits the captivate perfectly, but it does have the htc logo on the front that may bother you
pdair makes one specifically for the captivate
http://goo.gl/RYhF
I've been looking for the same thing... EVERYWHERE.... so far this is the only one I can find, and I believe at this point I'm just going to give in and buy it
got my case from pdair... while not what I really wanting it will work...
some more info for those who care:
the inside isn't lined, it's just soft leather.
sides are not solid and by that I mean like this: http://goo.gl/m6Ry obviously different styles but the side is constructed the same, with the top and bottom portions open and a bit of elastic in the middle.
it fits perfect, and it's about as thick/bulky as you'd expect. which leads me to believe it would help a lot in a fall/drop.
seems sturdy and well made all in all a good product.
You could try something like this over at Fommy: http://bit.ly/dAoHBI
I had one like this on my Tilt2 before and worked out pretty well. I was thinking of getting one for my Captivate before I ended up going with a TPU case.
I believe they also have horizontal cases, and other pouches that fit our phones.
they have a case like this at walmart and it didn't fit very well... I guess I'm just worried that a generic case wont fit the phone properly since every generic case Ive tried to fit it in so far has failed to come close to a decent fit.
at $15 I might give it a go though, thanks
This is exactly what I've been looking for. Has any one found one that fits nice and is made for the captivate. I've gone to fry's, bestbuy, radio shack, and walmart, even ones I've found in gas stations don't fit right. Bout to break down and make one.
From a phone on an app
http://bit.ly/c64f91
I bought this when i got my captivate. You can fit the phone in it, but the sleeve is too short for captivate, which block the top part of the sleeve that is meant to close to keep the phone from coming out easily. The phone will slide out if you put the sleeve upside down, but its not a problem for me, so i am still using it.
I too wanted a BlackBerry style sleeve. This is what I use-
krusell-gaia-mobile-pouch
I can't post a link or I would, but I got mine at the AndroidCentral store.
The BB sleeve has those nice rubberized edges to help cushion a fall, and those sleeves are a "little" more stiff than this one, which is mostly just pseudo-leather with a soft inner lining. The edge may still help on a drop, but the most important part...
It goes in and out of your pants pocket nicely while in the sleeve.
Two sources at Incipio confirmed that they will have a Dual Pro case
AVAILABLE NOW for order:
http://www.incipio.com/cases/smartp...phone-cases/sony-xperia-z3-compact-cases.html
Looks like they covered all Ports except USB.
Might have been better to leave only Mag Port open.
But protection especially if lip above glass is up 1/32" above screen- can you tell ?
Similar to the one they now have for Z1C.
http://www.incipio.com/cases/smartp...ases/dualpro-case-sony-xperia-z1-compact.html
This is the best protection I have seen so far .....
Any experiences with Dual Pro for Z1 , Iphone 5, etc ?
robertkoa said:
Two sources at Incipio confirmed that they will have a Dual Pro case
available soon for Z3 Compact.
Similar to the one they now have for Z1C.
http://www.incipio.com/cases/smartp...ases/dualpro-case-sony-xperia-z1-compact.html
Possible by end of October, but no guaranteed date.
This is the best protection I have seen so far .....
Any experiences with Dual Pro for Z1 , Iphone 5, etc ?
Click to expand...
Click to collapse
Thanks for posting this - looks like a sweet case I would personally be glad if they left the magnetic charge port open, as well as the power, volume and camera keys. AFAIC the waterproof flaps can be completely covered :good:
Perhaps if we all put forward our ideas here, @robertkoa could point his contact(s) at Incipio towards this thread for some free input on the design... :good:
That's pretty sweet. Although I'm trying to find a hard shell case that also has access to the magnetic ports. I wonder if that's just not structurally possible?
Ya I would imagine you would be comprising the impact dispersion by cutting out pieces of material. Of course its possible to cut as much material as you want, but functionally it won't be the same.
zoome9 said:
That's pretty sweet. Although I'm trying to find a hard shell case that also has access to the magnetic ports. I wonder if that's just not structurally possible?
Click to expand...
Click to collapse
This company seems to be working on a Z3C hard case that will work with the DK48 magnetic charger
case-mate [dot] com/Sony-Xperia-Z3-Compact-Cases/Case-Mate-Sony-Xperia-Z3-Compact-Tough-Cases.asp
Sorry, can't post URLs because I created a new account (replace [dot] with .)
The Case Mate tough case goes to the other extreme to the Incipio design and leaves way too much open IMO. Almost the entire left side of the phone is unprotected, which doesn't fill me with confidence. If the Incipio version is anything like the Z1 model then it will go to the other extreme and leave just the USB/SD door uncovered.
I guess that's the big conundrum for case manufacturers designing for this phone -- leave everything uncovered and compromise protection, or have better protection but no dock compatibility. Very few seem to be taking the middle ground and just leaving the mag port open, which I suppose is understandable since I doubt many people will bother getting a mag charging cable or dock.
pipspeak said:
I guess that's the big conundrum for case manufacturers designing for this phone -- leave everything uncovered and compromise protection, or have better protection but no dock compatibility. Very few seem to be taking the middle ground and just leaving the mag port open, which I suppose is understandable since I doubt many people will bother getting a mag charging cable or dock.
Click to expand...
Click to collapse
Actually I think many people (like me) go for the magnetig charging cable/dock for two main reasons: one, this way you don't risk to destroy the usb flap's water sealling in time and 2, you protect the device by reducing the risk to knock it on the floor if you trip on the charger I never charged it with a USB cable and it hits 100% way faster than my old HTC One M7. I got this smoke tpu case with a nice textured back to improve the grip www.jekod.com/en/cp_view.php?id=87 but I do look forward to the Incipio release. Actually, I would love to get a case with only the magnetic charging port open for better protection if I eventually use it in water.
Incipio Dual Case for Z3 C
I honestly don't have a high on the food chain Source at
Incipio to have any Input on the Design etc.
But they will have a Dual Pro out for Z3 C probably next week.
Confirmed through two people there about 3 weeks apart .
All we can do is see what they have done with Z1 Compact and
guess.
They said Dual Pro so high level of protection though not Mil Spec
like the Alpha Pelican Case ( Pelican is bulky though ) .
Impact Dispersion is an excellent Term to describe
what often happens with Tempered Glass Screen
Protectors.
I have talked to at least 10 people at AT&T , TMobile , Expansys etc. etc. and i t's surprising
that they have seen or experienced cracked glass Protectors and Shattered Glass Protectors with no screen damage underneath.
So Tempered Glass front AND back for Z3C AND a
Case is best, IMO.
And with no case Glass Protectors front and back , though I don't know who makes a Dual Kit , maybe try precutting Camera and Flash holes
for back using a " Front " ?
catalindan said:
Actually I think many people (like me) go for the magnetig charging cable/dock for two main reasons: one, this way you don't risk to destroy the usb flap's water sealling in time and 2, you protect the device by reducing the risk to knock it on the floor if you trip on the charger I never charged it with a USB cable and it hits 100% way faster than my old HTC One M7. I got this smoke tpu case with a nice textured back to improve the grip www.jekod.com/en/cp_view.php?id=87 but I do look forward to the Incipio release. Actually, I would love to get a case with only the magnetic charging port open for better protection if I eventually use it in water.
Click to expand...
Click to collapse
I'll also be using magnetic charging, but like everyone at XDA I'm probably a bit more techy than the average buyer :laugh: I love the description for the Jerod case... " not only protect your mobile phone, but also improve your taste in your friends". Have you found your taste in friends has improved since owning it?! :laugh:
FYI, the Cruzerlite case only has the magnetic port cut out on that side of the phone but it also has that silly "bugdroid" design on the back, which probably won't improve one's taste in friends!
LoL Didn't notice the description. I searched the product's page just to show you guys, after getting it localy for about 3euros. Good to know that about the cruzelite case because the pictures I have seen only show the bugdroid back. And yes it is silly
I've spent hours looking at threads and product pages, and only found one goofy-looking thing shipping from China -- and even that one doesn't explicitly say "no magnets", but at least doesn't mention magnets or auto-wake/sleep. Minimum requirements:
-- non-magnetic secure closure / clasp (for example. button-snap, or velcro, or the kind of self-locking metal closure used on attache- or brief-cases -- or even a zipper)
-- bumper-style surround (vs. corner straps -- looking for secure attachment *and* shock protection)
-- sufficient excess border material to protect corners and edges
-- able to fold the front cover all the way back (even though that blocks the camera), so that the whole thing can be held in a grippy stand / holder, without the front cover flapping around (BTW, this guy does a fantastic job of making stands / mounts to *custom* requirements, *inexpensively* -- he's already made two for my S8+ in Spigen Wallet case, and is about to make another to hold the same + wireless charger: SlipGripCarMounts.com)
Nice to have but not essential (could mod these features myself):
-- pen holder
-- elastic strap inside the front cover, to slip your hand through when cover is folded back
-- a carrying handle on the spine, as on artists' portfolio cases
-- able to fold back the closure so that it also holds in place the folded-back front cover
My dad is actually making me a leather folio case, I'll post photos when hes finished.
I have found this case and https://www.ebay.co.uk/itm/Forefront-Cases-Rotating-Smart-Case-Cover-Samsung-Galaxy-Tab-S3-9-7-SM-T820/332224684565?_trkparms=aid%3D777001%26algo%3DDISCO.FEED%26ao%3D1%26asc%3D20160801204525%26meid%3Dd914a29d045545bfb27f87a1b1b52fc7%26pid%3D100651%26rk%3D1%26rkt%3D1%26%26itm%3D332224684565&_trksid=p2481888.c100651.m4497&_trkparms=pageci%3A5a9d0226-7861-11e8-8690-74dbd180fbe2%7Cparentrq%3A367553b51640ac3d2c0efbd6fffa85f3%7Ciid%3A1
eBay item number:332224684565
The seller confirmed that there is no magnets and it uses the strap to keep it shut
double check about the magnet
if its this case
https://www.youtube.com/watch?v=fLWtSCBsBjE
and on the offical site it looks like it has sleep wake feature if you look thru pictures.
https://forefrontcases.co.uk/produc...t820-leather-rotating-smart-case-cover-stand/
let us know either way mate .
I need a case
swagatsourav said:
I have found this case and https://www.ebay.co.uk/itm/Forefront-Cases-Rotating-Smart-Case-Cover-Samsung-Galaxy-Tab-S3-9-7-SM-T820/332224684565?_trkparms=aid%3D777001%26algo%3DDISCO.FEED%26ao%3D1%26asc%3D20160801204525%26meid%3Dd914a29d045545bfb27f87a1b1b52fc7%26pid%3D100651%26rk%3D1%26rkt%3D1%26%26itm%3D332224684565&_trksid=p2481888.c100651.m4497&_trkparms=pageci%3A5a9d0226-7861-11e8-8690-74dbd180fbe2%7Cparentrq%3A367553b51640ac3d2c0efbd6fffa85f3%7Ciid%3A1
eBay item number:332224684565
The seller confirmed that there is no magnets and it uses the strap to keep it shut
Click to expand...
Click to collapse
Ronin475 said:
double check about the magnet
if its this case
https://www.youtube.com/watch?v=fLWtSCBsBjE
and on the offical site it looks like it has sleep wake feature if you look thru pictures.
https://forefrontcases.co.uk/produc...t820-leather-rotating-smart-case-cover-stand/
let us know either way mate .
I need a case
Click to expand...
Click to collapse
This is what he said to me before
I can confirm this item does not have a magnetic closure and is kept shut using the strap.
I have sent him a message again quoting the website , but the vide you sent was of s2. Not sure if they have changed it on S3.
bad news and good news
The bad news...
Examining the evidence offered by @Ronin475, I think it's probably true.
The good news...
I FOUND THE CASE. Before I started this thread, I had actually already ordered a case on Amazon, purely on the basis that:
(a) although the Amazon page doesn't explicitly say "no magnets", it does't mention magnets or sleep / wake;
(b) it was going to take 3+ weeks to deliver (from China), and I had no idea how much longer I might be searching; and,
(c) it's cheap ($14 US including shipping) and therefore low-risk.
Well, it arrived today, much sooner (11 days) than expected. I had been expecting to be disappointed in one or more
respects, considering the low price and the shipping location -- not because it's *made* in China, but because no one
thought it worth *warehousing* in a major market like the U.S.
I've been pleasantly surprised.
(a) I confirmed there are no magnets. I ran a small "horse-shoe" magnet all over the case, and detected no metal.
Then I passed all parts of the front cover over the right side of the powered-on S3, and it had no effect.
(b) Given the price, it seems to be better build-quality than I expected. And it "ticks" the essential boxes...
(c) It has rubber bumpers all around, with properly located openings for everything, except that there's no opening for the
microSD card tray. (Oddly, though, it appears to have an opening for the ejection pin.). I guess it's not unreasonable to think
that users wouldn't be opening the tray very often; and having to remove this case to access the tray isn't difficult. And the
Spigen Wallet folio case on my S8+ also blocks the combination SD / SIM tray.
(c) I'd prefer to have the surround be a *tiny* bit thicker and project a couple of mm higher above the screen than it does,
but I'd say it's roughly proportional to what the Spigen does.
(d) The edges of the case do extend visibly beyond the bumper, providing side and corner protection.
(e) The front cover does fold all the way back, lying completely flat against the back.
(f) This wasn't part of the "essentials" in my OP, but the outer surfaces are moderately textured, making it less likely to
slip out of your hand.
(g) Likewise not originally listed as essential, it has a slight detent / kickstand inside the front cover, which holds the screen
at approximately 60 degrees in landscape-mode.
My only reservation about the construction is that I haven't yet installed the Spigen tempered-glass screen protector
which I already purchased for the tablet, so I can't yet confirm that the surround will still properly fit after I do that.
It doesn't have any kind of closure, but I can fix that easily and cheaply with some stick-on pieces of "hook-and-loop"
material (AKA velcro) which are sold on Amazon and in any office-supplies store.
It doesn't have any of the attributes I listed as "Nice to have but not essential", but as I said, I could mod those features myself.
And one more thing...
The decorative image is garish -- no plain patterns or solid colors or other "quiet"-looking options are offered.
But you have a choice of fifteen different garish and / or juvenile-looking patterns from which to choose.
Now that I'm looking at the Amazon page again, the least silly-looking one is probably the "Plum Blossom" pattern --
if you don't mind seeing a flash of Shocking Pink whenever you open the case.
If you're the "handy" type, you could probably find something at a crafts-supply store which you could trim to fit
and then glue over the outside.
The forum isn't letting me post the complete URL, but you can simply go to Amazon, and copy and paste
the following product-ID into the search field: B074H1H9XS
The Forefront case mentioned by @swagatsourav certainly looks nicer, and I like the swivel and the multi-position
kickstand. But 20+ British pounds (with shipping) is about $27US. I would have been willing to spend that much,
if I'd been aware of that case, and if I could have been *certain* about the magnet.
excellent review mate, my finte case arrived (the reviews said no probs with magnets, i contacted finite they said they were unaware of any problems )
but unfortunatly it does affect the pen once you know what to look for sadly.
It was less than £10 ,so i took a scalpel to it and removed the magnetic strips without any major damage. (this version has the pen holder BTW)
It still acts as a stand but not as secure as with magnetic strips and doesnt clip closed , but until i can get a better version this may do
link below for refrence
https://www.amazon.co.uk/gp/product/B072N4YGVG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
nusratt said:
The bad news...
Examining the evidence offered by @Ronin475, I think it's probably true.
The good news...
I FOUND THE CASE. Before I started this thread, I had actually already ordered a case on Amazon, purely on the basis that:
(a) although the Amazon page doesn't explicitly say "no magnets", it does't mention magnets or sleep / wake;
(b) it was going to take 3+ weeks to deliver (from China), and I had no idea how much longer I might be searching; and,
(c) it's cheap ($14 US including shipping) and therefore low-risk.
Well, it arrived today, much sooner (11 days) than expected. I had been expecting to be disappointed in one or more
respects, considering the low price and the shipping location -- not because it's *made* in China, but because no one
thought it worth *warehousing* in a major market like the U.S.
I've been pleasantly surprised.
(a) I confirmed there are no magnets. I ran a small "horse-shoe" magnet all over the case, and detected no metal.
Then I passed all parts of the front cover over the right side of the powered-on S3, and it had no effect.
(b) Given the price, it seems to be better build-quality than I expected. And it "ticks" the essential boxes...
(c) It has rubber bumpers all around, with properly located openings for everything, except that there's no opening for the
microSD card tray. (Oddly, though, it appears to have an opening for the ejection pin.). I guess it's not unreasonable to think
that users wouldn't be opening the tray very often; and having to remove this case to access the tray isn't difficult. And the
Spigen Wallet folio case on my S8+ also blocks the combination SD / SIM tray.
(c) I'd prefer to have the surround be a *tiny* bit thicker and project a couple of mm higher above the screen than it does,
but I'd say it's roughly proportional to what the Spigen does.
(d) The edges of the case do extend visibly beyond the bumper, providing side and corner protection.
(e) The front cover does fold all the way back, lying completely flat against the back.
(f) This wasn't part of the "essentials" in my OP, but the outer surfaces are moderately textured, making it less likely to
slip out of your hand.
(g) Likewise not originally listed as essential, it has a slight detent / kickstand inside the front cover, which holds the screen
at approximately 60 degrees in landscape-mode.
My only reservation about the construction is that I haven't yet installed the Spigen tempered-glass screen protector
which I already purchased for the tablet, so I can't yet confirm that the surround will still properly fit after I do that.
It doesn't have any kind of closure, but I can fix that easily and cheaply with some stick-on pieces of "hook-and-loop"
material (AKA velcro) which are sold on Amazon and in any office-supplies store.
It doesn't have any of the attributes I listed as "Nice to have but not essential", but as I said, I could mod those features myself.
And one more thing...
The decorative image is garish -- no plain patterns or solid colors or other "quiet"-looking options are offered.
But you have a choice of fifteen different garish and / or juvenile-looking patterns from which to choose.
Now that I'm looking at the Amazon page again, the least silly-looking one is probably the "Plum Blossom" pattern --
if you don't mind seeing a flash of Shocking Pink whenever you open the case.
If you're the "handy" type, you could probably find something at a crafts-supply store which you could trim to fit
and then glue over the outside.
The forum isn't letting me post the complete URL, but you can simply go to Amazon, and copy and paste
the following product-ID into the search field: B074H1H9XS
The Forefront case mentioned by @swagatsourav certainly looks nicer, and I like the swivel and the multi-position
kickstand. But 20+ British pounds (with shipping) is about $27US. I would have been willing to spend that much,
if I'd been aware of that case, and if I could have been *certain* about the magnet.
Click to expand...
Click to collapse
Ronin475 said:
i took a scalpel to it and removed the magnetic strips without any major damage.
Click to expand...
Click to collapse
I've handled Fintie products before, and I like them. And although their cases offer some of the same garish patterns as mine, they at least also do offer some which are more staid. And even their version of the "Plum Blossom" pattern is lined in subdued grey (vs. bright pink).
More importantly... can you post some close-up pics to show what the "post-surgical" sites look like?
And... not to be intrusively personal, but why do you happen to have scalpels lying around?
Do you by any chance frequent the Whitechapel area, or do occasional barbering on Fleet Street?
will grab some pics when i get home tomorrow mate
the case was simple black which is all i wanted no frill's no spills.
Doesnt every one have a scapel laying around just in case? lol
A friend of my is a Doctor so she knows i like gadgets etc so gave me the small light pen scapel etc , they have come in handy on occasion
nusratt said:
I've handled Fintie products before, and I like them. And although their cases offer some of the same garish patterns as mine, they at least also do offer some which are more staid. And even their version of the "Plum Blossom" pattern is lined in subdued grey (vs. bright pink).
More importantly... can you post some close-up pics to show what the "post-surgical" sites look like?
And... not to be intrusively personal, but why do you happen to have scalpels lying around?
Do you by any chance frequent the Whitechapel area, or do occasional barbering on Fleet Street?
Click to expand...
Click to collapse
swagatsourav said:
This is what he said to me before
I can confirm this item does not have a magnetic closure and is kept shut using the strap.
I have sent him a message again quoting the website , but the vide you sent was of s2. Not sure if they have changed it on S3.
Click to expand...
Click to collapse
So finally he did confirm it does HAVE magnets when i asked specifically about sleep wake.
Unfortunately the case mentioned by @nusratt is no longer available on amazon UK and neither does the seller on amazon USA ships it to UK.
I am still contemplating about going for
MoKo Galaxy Tab S3 9.7 Slim-Fit Multi-angle Folio Cover Case but need confirmation from any members that it would not affect the spen use.
@leojab mentioned in https://forum.xda-developers.com/galaxy-tab-s3/accessories/zero-magnet-folio-style-case-t3807323 thread that it works perfectly fine.
swagatsourav said:
Unfortunately the case mentioned by @nusratt is no longer available on amazon UK and neither does the seller on amazon USA ships it to UK.
Click to expand...
Click to collapse
I'm surprised that they won't ship to UK, since they're shipping from China. Have you tried contacting the seller directly, through their Amazon page?
how about this one?
swagatsourav said:
I am still contemplating about going for MoKo Galaxy Tab S3 9.7 Slim-Fit Multi-angle Folio Cover Case but need confirmation from any members that it would not affect the spen use.
Click to expand...
Click to collapse
On xda and elsewhere, I've read several posts saying about various cases, "I didn't see the problem until I had been using the case for a while." That's why I decided not to pursue any case which mentioned having *either* a magnet *or* a sleep / wake function.
Somewhere recently, maybe on xda or even in this very thread, I saw this one ("kwmobile Elegant") on Amazon: B07233PKL8
Maybe you could ask that one's seller about magnets, sleep, and shipping.
I've been using a magnet case on my Tab S3 since August of last year with zero issues. It is on every day 24/7. I only take about 2 hours of notes a day on average Monday-Friday and the rest of the time is spent with magnets engaged and case cover closed. No issues.
I used a bit of glue under the flaps of the case i have cut open the sealed them down.
I then added some electrician's tape just to cover it ( the tape makes it look a bit rougher than the cuts )
I have marked where the magnetic strips were removed in yellow.
It does fold into the stand option but isnt as secure as i would like it as magentics dont hold it in place.
I may use something to sort that out later
Pic's
https://imgur.com/a/Y3SltoB
nusratt said:
I've handled Fintie products before, and I like them. And although their cases offer some of the same garish patterns as mine, they at least also do offer some which are more staid. And even their version of the "Plum Blossom" pattern is lined in subdued grey (vs. bright pink).
More importantly... can you post some close-up pics to show what the "post-surgical" sites look like?
And... not to be intrusively personal, but why do you happen to have scalpels lying around?
Do you by any chance frequent the Whitechapel area, or do occasional barbering on Fleet Street?
Click to expand...
Click to collapse
Ronin475 said:
I then added some electrician's tape just to cover it ( the tape makes it look a bit rougher than the cuts )
Click to expand...
Click to collapse
1. Looking at the pic, I wondered, did you use the electrician's tape to smooth over the rough feel of the cut edges on the hand? And / or because the opposite sides of the cut couldn't be brought back together in a gap-less seam?
2. Also, from which side did you initiate the cutting? Superficially it looks like the inner and outer covers are two separate pieces of different materials, the inside matte and fabric-like, and the outside shiny plastic / TPU; but maybe the inner matte surface is merely a coating. Was there an inner core between them, maybe cardboard? I'm asking because I'm wondering if it would be possible to remove the magnets by cutting only from the inside, so that the outside never shows any sign of the alteration. I imagine that the magnets were held in place by some kind of adhesive.
3. Looking at the pic again, it occurs to me to ask: do the rubber bumpers on that case completely surround the tablet, or are they only on the corners? The pic makes it appear that either it's corners-only, or the corners project higher above the tablet edge than the bumper sides do.
aspexil said:
I've been using a magnet case on my Tab S3 since August of last year with zero issues... 2 hours of notes a day...
Click to expand...
Click to collapse
I understand completely -- there are many people who report fortunate experiences like yours. It's just that there are so many who've had the opposite experience, that a lot of shoppers, in this forum and elsewhere, are bending over backwards to be "better safe than sorry".
btw, what case are you using?
To make the longest cut on the "outside" of the case i had to split it (like splitting a piece of cardbord) ,
the split is fairly easy , it gets a bit messy pulling out the magnetic strips that are glued in place so in some spots its a little rough depending how lucky you are. ( i would recomend breaking the magnetic into smaller bits as its easier to remove)
It doesnt feel rough to the touch or any thing and its mainly the central bit that was slightly rough you can see that in the pic.
For the magnetic strip closer to the screen i cut away from the smooth grey side of the case , this was slightly more tricky as i didnt want to poke thru to other side of case.
The central bit of the case is indeed carboard but as the magnets are glued in place there will be a little damage removing them.
The magnets in the plastic part of the case i used a metal spudger to pry them out
I added the tape as a layer of protection to stop any further splits etc
The bumpers are only on the edges are a hard plastic type of material.
The overall build of the case is "ok" not amazing but its a decent case for unde £10.
nusratt said:
1. Looking at the pic, I wondered, did you use the electrician's tape to smooth over the rough feel of the cut edges on the hand? And / or because the opposite sides of the cut couldn't be brought back together in a gap-less seam?
2. Also, from which side did you initiate the cutting? Superficially it looks like the inner and outer covers are two separate pieces of different materials, the inside matte and fabric-like, and the outside shiny plastic / TPU; but maybe the inner matte surface is merely a coating. Was there an inner core between them, maybe cardboard? I'm asking because I'm wondering if it would be possible to remove the magnets by cutting only from the inside, so that the outside never shows any sign of the alteration. I imagine that the magnets were held in place by some kind of adhesive.
3. Looking at the pic again, it occurs to me to ask: do the rubber bumpers on that case completely surround the tablet, or are they only on the corners? The pic makes it appear that either it's corners-only, or the corners project higher above the tablet edge than the bumper sides do.
Click to expand...
Click to collapse
also forgot to mention the sleep wake function still works without the magnets in the case.
there is a stong magnet in the tablet where the spine of the case is.
So i think the small square of metal i left in the case is registered by the fluctuation in the device field and when the light sensor is covered/uncovered it sleeps/wakes.
Ronin475 said:
To make the longest cut on the "outside" of the case i had to split it (like splitting a piece of cardbord) ,
the split is fairly easy , it gets a bit messy pulling out the magnetic strips that are glued in place so in some spots its a little rough depending how lucky you are. ( i would recomend breaking the magnetic into smaller bits as its easier to remove)
It doesnt feel rough to the touch or any thing and its mainly the central bit that was slightly rough you can see that in the pic.
For the magnetic strip closer to the screen i cut away from the smooth grey side of the case , this was slightly more tricky as i didnt want to poke thru to other side of case.
The central bit of the case is indeed carboard but as the magnets are glued in place there will be a little damage removing them.
The magnets in the plastic part of the case i used a metal spudger to pry them out
I added the tape as a layer of protection to stop any further splits etc
The bumpers are only on the edges are a hard plastic type of material.
The overall build of the case is "ok" not amazing but its a decent case for unde £10.
Click to expand...
Click to collapse
Ronin475 said:
also forgot to mention the sleep wake function still works without the magnets in the case.
Click to expand...
Click to collapse
1. WTF?! Then what the hell is the purpose of all the other magnets you found and removed?
2. Damn. This is depressing news. I can't begin to tell you how many otherwise very desirable-seeming cases I looked at and ruled out simply on the assumption that "sleep/wake = magnet".
it appears the magnets mainly held the case closed an the other strip was used to secure the stand bit.
I double checked with a magnetic field app on my phone , not high tech but does pick up fields.
and magnets are gone and there is a small reading where that small metal or maybe chip is.
i have attached a small elastic ribbon so the stand works perfect now, may work on something for keeping the case closed .
nusratt said:
1. WTF?! Then what the hell is the purpose of all the other magnets you found and removed?
2. Damn. This is depressing news. I can't begin to tell you how many otherwise very desirable-seeming cases I looked at and ruled out simply on the assumption that "sleep/wake = magnet".
Click to expand...
Click to collapse