Develop Bugs

another case qu. - does anyone have this ?

http://www.mobilefun.co.uk/product/12649.htm
and is it any good ?
thx
c.

These leather cases seem ok but the one I have just leaves tiny bits of material all over the Orbit screen....anyone know of a simple pouch for the Orbit?

Don't mean to hijack the thread but anyone have one of these:
http://cgi.ebay.com.au/leather-case...0QQihZ012QQcategoryZ48673QQrdZ1QQcmdZViewItem
Looks to be designed specifically for O2 but I want to know if someone recognises it as a proper Artemis case and not some other model's case that just happens to fit. (ie is it a dedicated P3300 case that will have a perfect fit?)

looks like a generic. problem with sleeve cases is that you need to take the phone out to do anything. so unless its top quality you can get scratches and smears over time.
Just got the PDAair flip case (for my orbit). Its quite nice as it protects the screen and trackball without actually touching either. However it holds the orbit extremely tightly, have to struggle to take it out (although I mostly keep it in).
this looks like the best quality one:
http://www.pielframa.net/pielframa_productos.asp?id=1690
buts it pricey. I'll see how my Pdaair is after a month .....

yarstoft said:
These leather cases seem ok but the one I have just leaves tiny bits of material all over the Orbit screen....anyone know of a simple pouch for the Orbit?
Click to expand...
Click to collapse
im using my 80gb ipod pouch until my case arrives! fits perfectly

Now got the pdair black metal case! its fantastic as the screen is protected.
One problem is you can't get the stylus out if you have an orbit, but a small amount of cutting with a hacksaw should sort that out

I got this case from ebay yesterday, seems very good....
http://cgi.ebay.co.uk/PDAIR-XDA-ORB...hZ002QQcategoryZ48673QQtcZphotoQQcmdZViewItem
It works very well, all functions accessible, is fairly bulky although and wont sit in car holder very well, however i believe a car holder is available which uses the round clip that comes with the case....
Dan

Platinum Series Case for HTC EVO 4G from Best Buy - $30

http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.

They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.

can we get some pics? the product wasn't displayed good on there site

it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this

enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.

I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.

Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.

There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.

:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji

phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?

The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App

Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App

senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.

I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.

yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage

I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.

senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.

Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).

Cases

Anyone know if there are any available cases? I think I'd really need one

I was going to grab an invisible shield myself, I've had cases for phones before but I find the HTC Aria is definitely pocket size.

got one
i got a soft gel case from att today when i picked up the phone, however there were no screen protectors available at the store... pity she has such a nice screen...

I grabbed a set of generic screen protectors from the Rat Shack today. I used a hole punch to make a hole for the optical trackpad, and then carefully trimmed the sheet to size. The standard single hole punch is exactly the right size for the trackpad.

robonoob said:
i got a soft gel case from att today when i picked up the phone, however there were no screen protectors available at the store... pity she has such a nice screen...
Click to expand...
Click to collapse
any idea of the brand on that gel case. there wasn't any at my store
amzer has a bunch of cases being released 7/13 according to their site

I didn't pickup a case from the AT&T for the outrages price they want for it. In fact, I don't think this phone needs a case since the back is virtually indestructible. However, I need a screen cover fast.

The gel case is decent, but I'm not sure it need it since the only part of the phone it covers is the soft touch part. The AT&T stores got screen protectors, but the package doesn't say Aria on it. It says HTC (model# I can't remember). The only carried protectors for the Fuze, Tilt 2 and the Pure so the other HTC one should be it. It's a 3 pack for $9.99.

The AT&T store I went to had cases and protectors. Case was expensive and didn't look necessary, the back cover feels very solid.
The Screen protectors are labeled as "Compatible with HTC A6366," product code 888063373688

i like the gel type cases(as long as they aren't too thick) for some shock absorption

case and screen protection
ok so it was a branded att case, no specific maker of the case, i did some research and it seems the Aria is basically a droided HD mini with a trackpad, so the measurements are the same as the mini, Zagg makes a full kit with screen and back protection, use a hole punch for the track pad and all is well, i will be getting my kit within a week or so i will keep you guys updated...

robonoob said:
ok so it was a branded att case, no specific maker of the case, i did some research and it seems the Aria is basically a droided HD mini with a trackpad, so the measurements are the same as the mini, Zagg makes a full kit with screen and back protection, use a hole punch for the track pad and all is well, i will be getting my kit within a week or so i will keep you guys updated...
Click to expand...
Click to collapse
I almost forgot it's pretty much the same casing as the HD MINI! I just ordered a nice cheapie case on ebay! lol
I'd post the link, but I'm not allowed to yet as a new user =P

wish HTC or other company make some nice case for it.

ok so i have to retract part of my previous statement, the case is actually made by htc, i didn't notice the imprint at the bottom, so HTC does make a case for it, probably the same as the mini's.

http://store.cheapdroids.com/HTC-Aria-Accessories//

engunneer said:
I grabbed a set of generic screen protectors from the Rat Shack today. I used a hole punch to make a hole for the optical trackpad, and then carefully trimmed the sheet to size. The standard single hole punch is exactly the right size for the trackpad.
Click to expand...
Click to collapse
I did exactly the same thing 3 days ago.
To make it easier i placed the screen protector on the phone so it overhung the entire thing, then flipped it over and trimmed the excess off with a razor blade. Finished it off by cutting out the protector that was covering the speaker.

PDAir has some decent looking cases for the HD Mini that I think would work GREAT for the Aria:
http://www.pdair.com/catalog/index.php?cPath=10100000_900000_11000908
I'm especially a fan of THIS one:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000908&products_id=28681
Of course, if you're not a cheap bastard like me, and prefer rich, European styling, THESE are some incredibly sweet cases:
http://www.pielframa.com/htc-touch-hd-mini-cases.htm
Regards,
Corporate Dog
EDIT: Oh. I also found this cheapie, which strikes me as somewhat similar to the PDAir case I highlighted above:
http://www.netimes.com/shop/flip-case-with-belt-clip-for-htc-hd-mini-htc-photon-p-2672.html
I think this is the case I'll probably be getting, but my IDEAL case would be a rubberized/silicone/plastic, form-fitting shell, with a detachable belt clip on the back. I know the shell cases are a dime-a-dozen, but I have yet to find one with a belt clip. Anyone know of any?

Knifey said:
The AT&T store I went to had cases and protectors. Case was expensive and didn't look necessary, the back cover feels very solid.
The Screen protectors are labeled as "Compatible with HTC A6366," product code 888063373688
Click to expand...
Click to collapse
Thanks for the info on that, but my back cover (the top left corner) is loose for some reason, so I'm afraid it'll come off soon. I also realized that the back is the antenna for the phone (two pins in the case that connect to the phone, and no signal when back is off). So, I think I'll get a screen protector and a cheap gel case. Thanks all.

Hi there! This is a fun thread. Don't have to think TOO hard!
If anyone has actually bought and is delighted with a case please let me know!
I am really looking for a black rubberized (non-skip) case that goes all the way around the back, up the sides.
I wish there was like silicon case, but actually out of thicker, less flexy rubber.

Kit is up on Zagg's site.
Just ordered one. May opt for a gel case for the back end instead of the full kit...when they're available. All I'm seeing are "Available 7/27" or "Ships in 1-3 months" or something every time I try to order an actual case. I guess I'm stuck waiting?

according to the amzer site http://www.amzer.com/HTC/HTC-Aria-accessories.htm the jelly silicone cases are available now. i wonder if they show the screws like the argyle ones do.

Holsters for other phones that work with the Vibrant

If your like me you don't like to trust cheap plastic crap to protect your $600 phone, Thats why I have been researching which holsters work with the Vibrant since T-mobile doesn't make a good one themselves. If you have a Silicon skin on your Vibrant then I recommend the holster intended for the Droid X that is linked here http://www.usosmart.com/Motorola_Droid_X_Shell_Holster_Combo_p/vzmotxshc.htm
If you don't have a skin on your phone then I recommend the holster intended for the Droid Incredible linked here
http://www.usosmart.com/Verizon_HTC_Droid_Incredible_Shell_Holster_Combo_p/vzhtcincshc.htm This holster is a tiny bit too small so its a great fit
The Holster/shell combo intended for the Samsung Fascinate might also work for the Vibrant if you have a skin/shell, Link is here
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=12283&page=1
I am working on getting pictures for all these holster with the Vibrant fitted inside them.

Why not put the 2 hands in front of you to work and make a vastly superior product that fits perfectly ?

Because every holster I have seen specifically for the Vibrant sucks. There are however some good Skins for it but no holsters I have seen that work with the skin on, Thus the reason for this thread.

Persanity said:
Because every holster I have seen specifically for the Vibrant sucks. There are however some good Skins for it but no holsters I have seen that work with the skin on, Thus the reason for this thread.
Click to expand...
Click to collapse
So.... not only do your hands not work, your eyes are suspect too ?

Haha... too funny.
Unfortunately, I find that most people have no concept of what it means to create.
Nice holster n2ishun!

I don't think the fascinate one will work because of the bump on the back of the Vibrant right? I was wondering the same thing about the fascinate cases since there seems to be better ones for that (especially Seidio). Anyone try a Fascinate specific case on a Vibrant yet?
Sent from my SGH-T959 using XDA App

I used to carry my G1 in a case designed for a wing. Now my Vibrant with a Case like the Barely There fits in it.
I like to recycle as you can read.

n2ishun said:
Why not put the 2 hands in front of you to work and make a vastly superior product that fits perfectly ?
Click to expand...
Click to collapse
n2ishun said:
So.... not only do your hands not work, your eyes are suspect too?
Click to expand...
Click to collapse
Sure, I'll just go ahead an fire up my 3d printer and 3d scanner and make a case that a large company can't even make. This thread is for people who like to adapt and modify existing hardware, If you don't like it then go away. Actually, let me ask you a question first, Why would you come in a thread specifically about using another phones holster with the vibrant, Then show a case made for it and then act like a ***** because our opinions about exsisting products differ? I don't like universal cases and I personaly think yours is ugly because I dislike leather/suede. EDIT:I found a post in another thread where you said you made that case and if you really did, good job, its not my style but good job.
egrims, I tested the fascinate holster/shell I linked to, The shell won't fit the vibrant but the holster does although its a little loose, If you have a silicon skin on your vibrant it should fit perfectly. As I stated above I am working on getting pictures for all the holsters I mention.

I tried my buddies fascinate combo holster from vzw. It fits pretty snug but the speaker is covered because the fascinate speaker is on the bottom portion of the back. And the camera is covered a tad but pics come out fine.
Sent from my fingers on my SAMOLED screen using XDA App

kentot, Are you talking about the case/holster I linked to in the original post or the one thats just a holster? That one would work if the Vibrant didn't have the "chin" , If you put the vibrant in the case I think your referring to and shake it to simulate running it will fall out cause the bottom isn't held in.

Vibrant in Fascinate combo case from VZW
Yes I am talking about that case. Attached are pics of my Vibrant in the case for the Fascinate. (pics taken by Fascinate)
As you can see the case is pretty snug and will not fall out if shaken, Which I have tested... Vigorously.... LOL
The back shot shows how the speaker is covered and the camera lens is partly covered.
Edit: Bad focus job by me but at least you get the idea

I thought you were referring to a different case then the one I linked. There is a "snap-in" Verizon case for the fascinate that won't work for the reasons I previously stated, basicly it doesn't snap in and any fast movements cause it to fall out

I had a T-Mobile leather holster/belt-clip case for my G1 and the Vibrant fit perfectly into it, a little tight with the T-Mobile gel-skin on it, but it fit all the same. That holster finally fell apart last week and I'm looking for a new one. The universal one that T-Mobile now stocks is too small to take the Vibrant with its gel-skin on.
I'm hoping that Best Buy or someone will have a universal holster that'll take it.

Just a little update
So I got my holster for the Droid Incredible a few days ago and I gotta say I love it. The Vibrant fits in there extremely well and its so snug it won't fall out basicly for any reason so long as the phone is in the holster with the screen face out, With the screen face in the holster isn't snug enough for the phone and it unfortunitly could fall out. Hopefully Otterbox makes a Vibrant case soon and it doesn't make the phone twice as big like with the iPhone cases.

I bought this one:
http://www.amazon.com/gp/product/B002Q4AJR2
It came in the other day. It fits the phone perfectly with my gel skin on. And, it was CHEAP.
The quality is great, I can't actually find anything bad to say about it.

http://store.thebluedot.net/Items/c...ase for Samsung Galaxy S i9000 Pouch Pro Skin
Works perfectly fine with Case-Mate Tough Case; perfect fit. Great build. Fast delivery. Search in accessories, somebody has posted pictures of this + tough case in its pocket. Not too tight, not to loose.

the BlackBerry Storm fit prefectly

Cases

There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.

Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?

The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.

I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.

fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.

Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.

I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.

Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T

http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.

Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.

Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)

And what about silicone cases? Soft ones I mean..

There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?

Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels

Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks

clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am

hard case with soft grip
or you can call it a "grippy" hard case

rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you

just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....

rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.