Hi There
I recently updated to Android 4.3 and ever since then my phone isn't charging anymore. When I connect it to my PC it is connected as an "unknown device". At first it was charging when turned off, but know even that doesn't work.
I had clockworkmod installed, but since the update I only get the "No command." message and the standard Android system recovery.
I'd like to get my phone connected to my PC again somehow, so I can downgrade to 4.2.2 again.
Anyone has the same problem / suggestions on how to solve this?
Thanks!
Phone: Galaxy Nexus I9250 (maguro)
Lock state: unlocked
Bootloader: PRIMEMD04
Carrier: Swisscom
Hi, I've got the exact same problem on my Galaxy Nexus, and I can't find any solution yet, I've a couple of things that did not work at all.
Now I've got the charging anim on the screen when my phone is switched off but even then, it seems I can't get it charged more then 8%
Really don't know what to do here
External battery charger... Charge your battery and flash back to 4.2 until you can sort issue out?
DrRatek said:
Hi, I've got the exact same problem on my Galaxy Nexus, and I can't find any solution yet, I've a couple of things that did not work at all.
Now I've got the charging anim on the screen when my phone is switched off but even then, it seems I can't get it charged more then 8%
Really don't know what to do here
Click to expand...
Click to collapse
Same here after updating it worked normally for a week but now no charging . I have to charge it by turning of the phn with a high power charger
I am a noob don't know how to downgrade
Huehnerdieb said:
Hi There
I recently updated to Android 4.3 and ever since then my phone isn't charging anymore. When I connect it to my PC it is connected as an "unknown device". At first it was charging when turned off, but know even that doesn't work.
I had clockworkmod installed, but since the update I only get the "No command." message and the standard Android system recovery.
I'd like to get my phone connected to my PC again somehow, so I can downgrade to 4.2.2 again.
Anyone has the same problem / suggestions on how to solve this?
Thanks!
Phone: Galaxy Nexus I9250 (maguro)
Lock state: unlocked
Bootloader: PRIMEMD04
Carrier: Swisscom
Click to expand...
Click to collapse
Can you check if you still have root? If you still have root, you can flash another recovery using Mobile Odin.
rajuki said:
Can you check if you still have root? If you still have root, you can flash another recovery using Mobile Odin.
Click to expand...
Click to collapse
Hi rajuki
Well I thought so. But after I installted Mobile Odin it tells me I don't...
Thanks for the hint anyways.
NYYFan325 said:
External battery charger... Charge your battery and flash back to 4.2 until you can sort issue out?
Click to expand...
Click to collapse
Yeah I want to flash back to 4.2 or CM. The problem is I can't since my PC doesn't recognize my device. I tried different drivers but it just pops up as "unknown device" in the device manager.
Can anyone tell me how to downgrade i am a noob currently on stock 4.3
Sent from my Galaxy Nexus using xda app-developers app
After hours of flashing rooting unrooting it finally works but i really don't know how.
At first my phone wasnt anymore recognized by my PC, after playing around with checking unchecking debuging mode, and uninstalling drivers and installing drivers from the NEXUS ROOT TOOLKIT, it came back on my PC screen.
-first i downgraded to 4.2.2 (using nexus root tollkit), it did not change anything
-then got back on 4.3 with OTA, still same problem
-then tried unlocking rooting and flashing cyanmogen mod, still same problem
-Finally i flashed stock 4.3, unrooted and locked, and now everything works perfectly...I really dont know how but now its all good, also it looked like Avast and Nova launcher were not doing too well with 4.3 so i uninstalled them and really saw a difference afterwards
I hope this may help someone
Related
I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.
any ideas?
le14 said:
I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.
Click to expand...
Click to collapse
does it recognize it in adb if usb debugging is enabled?
Did you try pulling the battery for 30 seconds?
Sent from my SGH-T989 using XDA App
reboot the PC / laptop
unplug all other USB devices
AllGamer said:
reboot the PC / laptop
unplug all other USB devices
Click to expand...
Click to collapse
I've tried that and i've tried this on 4 PC's and my usual Mac that I use to transfer files but no luck.
I also tried the debugging mode but nothing as well. Ill try for a couple more days with random things but since the rom is stock and everything is basically like out the box status if I were to return it with the synergy kernel screen on bootup, what would tmobile say even though everything is stock even the kernel?
Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.
Mr_creeper_98 said:
Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.
Click to expand...
Click to collapse
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878
ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
+1 From the posts Ive read the people that have had this issue have used the zedomax flash. Safest bet for anyone looking to go back to stock should stick with the odin method. I think there should be a warning in the index thread next to the [HOWTO] [ROM] How to Unroot SGH-T989 Painlessly link about the usb issue and also the kernel boot image even thou if people would just read the whole thread they would see that others have already reported the kernel image issue......
Returning the phone with that would land you an out if warranty fee
Sent from my SGH-T989 using Tapatalk
Mr_creeper_98 said:
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878
Click to expand...
Click to collapse
If you flash this stock kernel zip before you flash the easiest unroot method ever it will give you stock kernel and remove any custom kernel logo.
http://db.tt/mYZw1F8w
Powered by the SGSII....
yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?
Is your recovery stock. ? If its not you can always put it your sd card and flash it that way.
le14 said:
yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App
God this is annoying.. Alright, so my Verizon Gnex was running 4.1 about 2 and half weeks ago, and its charging port was messed up, so i sent it to samsung to repaired, and I got it back yesterday. I rooted and unlocked it with Nexus Root Toolkit 1.5.2, and all was good. I flashed Jellybelly and it ran perfect, but when plugged into it would just reboot over and over again.. I have no idea why, but when unplugged it would reboot and work fine. I have no idea why that happens but anyways, I noticed that my LTE and data just completely disappeared. Where it should it full 4g, it was none. So i flashed multiple roms in hopes, with no luck. I posted on Rootz, and was told to revert back to stock. So I did that with the toolkit, but i cant get it into ADB to lock my bootloader, because it restarts itself.. and if i leave it plugged into my computer it goes to an encryption failure page.. I have no idea what to do.. suggestions please?
xxjustin24xx said:
God this is annoying.. Alright, so my Verizon Gnex was running 4.1 about 2 and half weeks ago, and its charging port was messed up, so i sent it to samsung to repaired, and I got it back yesterday. I rooted and unlocked it with Nexus Root Toolkit 1.5.2, and all was good. I flashed Jellybelly and it ran perfect, but when plugged into it would just reboot over and over again.. I have no idea why, but when unplugged it would reboot and work fine. I have no idea why that happens but anyways, I noticed that my LTE and data just completely disappeared. Where it should it full 4g, it was none. So i flashed multiple roms in hopes, with no luck. I posted on Rootz, and was told to revert back to stock. So I did that with the toolkit, but i cant get it into ADB to lock my bootloader, because it restarts itself.. and if i leave it plugged into my computer it goes to an encryption failure page.. I have no idea what to do.. suggestions please?
Click to expand...
Click to collapse
try another USB cable
But if you do smash it, do it in some awesome way. Also, post a video.
Sent from my Galaxy Nexus using xda premium
Just a heads up..smashing your phone will greatly affect the resale value.
bgdxv said:
try another USB cable
Click to expand...
Click to collapse
+1, a different USB port &/or a different PC.
Your phone reboots when plugged in fastboot mode?
:Edit: if you're rooted App
3rdstring said:
+1, a different USB port &/or a different PC.
Your phone reboots when plugged in fastboot mode?
:Edit: if you're rooted App
Click to expand...
Click to collapse
Tried multiple usb's and ports. And nope, just when booted up. Works in fastboot.
Set up the Adroid SDK & just use fastboot (some infos) & "fastboot oem lock"
3rdstring said:
Set up the Adroid SDK & just use fastboot (some infos) & "fastboot oem lock"
Click to expand...
Click to collapse
"Toolkit"strikes again!
Sent from my Galaxy Nexus using xda premium
Fully restored, locked bootloader, 4.04, still reboots when plugged into ANYTHING. This might be a problem from samsung, because I sent it a couple weeks ago due to a charge port issue. Is sending it in the only solution?
xxjustin24xx said:
Fully restored, locked bootloader, 4.04, still reboots when plugged into ANYTHING. This might be a problem from samsung, because I sent it a couple weeks ago due to a charge port issue. Is sending it in the only solution?
Click to expand...
Click to collapse
My vote is to call Samsung. They must offer some kind of repair warranty.
Sent from my Galaxy Nexus using xda premium
Hey im new here so im not sure if there is already a troubleshooting thread for the ace 2 here, but anyway,
My ace 2 wont start properly. It was working fine until i restarted it. Now it goes to the logo, vibrates once or twice, then goes to a black screem.
Ive tried pulling the battery, factory data reset, clearing the cache, but nothing works!
My phone is rooted (but its been rooted for quite a while now), and its running a custom rom (jelly cream). It experienced the same booting problem before after i flashed the jellycream rom but it started after i flashed a completely unrelated rom that was intented for unrooting my phone.
Can anybody offer some help?
Cos i know that the ace 2 cant connect to the computer without enabling the usb sharing mode, and i have absolutely no idea what to do.
yongdk1 said:
Hey im new here so im not sure if there is already a troubleshooting thread for the ace 2 here, but anyway,
My ace 2 wont start properly. It was working fine until i restarted it. Now it goes to the logo, vibrates once or twice, then goes to a black screem.
Ive tried pulling the battery, factory data reset, clearing the cache, but nothing works!
My phone is rooted (but its been rooted for quite a while now), and its running a custom rom (jelly cream). It experienced the same booting problem before after i flashed the jellycream rom but it started after i flashed a completely unrelated rom that was intented for unrooting my phone.
Can anybody offer some help?
Cos i know that the ace 2 cant connect to the computer without enabling the usb sharing mode, and i have absolutely no idea what to do.
Click to expand...
Click to collapse
how about flashing stock through odin?
PokMahPok said:
how about flashing stock through odin?
Click to expand...
Click to collapse
Odin wont recognise my phone even after installing samsung usb drivers on the com
yongdk1 said:
Odin wont recognise my phone even after installing samsung usb drivers on the com
Click to expand...
Click to collapse
Go to download mode 1st? And sometimes you have to reboot the PC to make it recognizes the phone.
Sent from my GT-I8160 using xda app-developers app
Yeah hold down power plus vol up plus home to get into download mode. Then plug it into your computer
yongdk1 said:
Hey im new here so im not sure if there is already a troubleshooting thread for the ace 2 here, but anyway,
My ace 2 wont start properly. It was working fine until i restarted it. Now it goes to the logo, vibrates once or twice, then goes to a black screem.
Ive tried pulling the battery, factory data reset, clearing the cache, but nothing works!
My phone is rooted (but its been rooted for quite a while now), and its running a custom rom (jelly cream). It experienced the same booting problem before after i flashed the jellycream rom but it started after i flashed a completely unrelated rom that was intented for unrooting my phone.
Can anybody offer some help?
Cos i know that the ace 2 cant connect to the computer without enabling the usb sharing mode, and i have absolutely no idea what to do.
Click to expand...
Click to collapse
What did you do to the phone prior to restarting it? Did you flash a ROM (which ROM)?
What version of the Ace II do you have?
AW: [Q] Help! Ace 2 wont start!
I had the same problem. Can you get into download mode? If the answer is yes then simplx flash a new Rom. Use a Stock Rom or the original one.
I had the problem that download mode didn't work (I don't know why) so i tried volume up+ volume down+ Home+ power (i don't know what that make but i found this somewhere in the internet) And then i was able to come into download mode and I flashed a new ROM
Sent from my GT-I8160 using xda premium
Hey all,
Yesterday I was about to flash a new ROM on my wifes Xperia S. She had an old ICS rom and I decided to go for the PAC MAN JB 4.2.2 ROM. Seemed ok.
I own a SGS2 myself so I consider myself a total noob when it comes to the Sony.
I know CWM works on on the XS and I am pretty sure I installed it when I romed it last time. Although I didn't remember how to enter CWM mode so I installed it again through that .bat file that comes with it.
I downloaded the ROM and the GAPPS and copied both to the phone. And now I thought I was set and went for it. Of course I did a Nandroid backup before and also from within the phone a full backup in Backup & Restore. Bootloader is unlocked by the way.
So now I boot into CWM and I do a full wipe/factory reset. I clear the cache and dalvik and also I format the system as he guides us to do in his installation video.
I then installed the rom or at least tried. Got the status 7 together with some error I can't remember.
I read then that people had issues downloading the rom with google chrome which sounds pretty far fetched but I decided to do what other did and downloaded the rom from firefox.
Then within CWM I thought to start the USB and copy it directly in CWM since I already had reset the phone and didn't want to go through the "new phone" routine. But the USB in CWM didn't work so I had to restart the phone.
It then got stuck on the initial SONY logo screen and I'm stuck there now.
I have installed the Flash tool from SONY coz I read in another thread that the only way out is to install stock rom. However when I connect the phone holding volume down windows 8 always say that the USB device is not recognized. I have of course rebooted the PC after.
I'm going to try this on my Windows 7 PC as well later after work but I dread I will be stuck there as well.
Can anyone shed some light on how I can get my wifes Xperia S to be recognized by her Windows 8 laptop? Or have I bricked her phone?
I have thought many times that I bricked my SGS2 but always came out on top, I don't want to lose this battle either.
if it says "Unknown Devices" when you plug the phone to the computer, try change an USB line or change a computer
if it says "Unable to install the driver" or another something like this when you plug the phone to the computer, try install the Flashtool driver
...any screenshots?
Windows 8 gives a balloon tip saying exactly "USB Device not recognized". And I did install the Flashtool to get the driver but I guess I still miss the correct driver here.
I will do some more troubleshooting after work. I just thought maybe someone had similar problem and had a quick and easy solution.
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Gripa98 said:
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Ok I actually managed to get it connected on my Windows 7 PC.
I installed Emma (Flashtool) and it installed something but I'm not sure really what happened to be honest. Light on the phone was green and it installed 4.0.4 ICS.
It was a success after about 217 seconds but after that the phone didn't do anything. Stayed with green light and when I disconnected it it could not be started at all.
Maybe it doesn't have enough power to start up. It is on 220V charge now so lets see what will happen with it.
Bergaliden said:
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Click to expand...
Click to collapse
I just installed pc companion
Sent from my LT26i using xda app-developers app
Good news y'all.
All it needed after using Emma was some juice. Now it is back to it's normal self. And I'm not going to ROM it anymore. Soon JB will be officially out for XS.
True!! When I was a noob, I tried to flash cyanogrnmod on my galaxy ace (it was a year ago) and I stuck in bootloop. Idk what to do and I regret it, from that day I never flash any rom. But this year I flash xzxperience on acro s and it works but not so happy and then I flash stock firmware to normal. And I regret because i ve unlocked bootloader!! And now BE is not working anymore.
Sent from my LT26w using xda premium
Phone: VZW Galaxy Nexus, Rooted, TWRP Recovery, Lean Kernel
For the first (and last) time in my life I decided to dirty flash a ROM (4/16 build of Project Elite) to my phone (from an earlier build of PE). My phone apparently hated that. It has created an odd world of problems for my phone that I am hoping someone may be able to see a trend with and offer up some suggestions for escaping this odd world.
Here are my phone's symptoms:
(1) Earpiece on phone stopped working: During phone calls, I can only hear audio when using speakerphone. I was able to remedy this by getting the SoundAbout App from the Play store. This tool allows you to manually change how the audio is routed. My phone thinks a headphone is plugged in and tries to route the audio through the headphone jack. This app allows me to fix that problem.
(2) USB File Transfer Mode stopped working: When connecting my phone to the computer it will charge (sometimes, see #3) but my computer will not recognize it as a device. Consequently, adb (and wireless adb), fastboot and ODIN all will not connect to my phone because the phone is not recognized. I have uninstalled, updated and re-installed just about every driver set I can find for the Galaxy Nexus/ I know it is not a driver issue because my wife's Nexus connects to the CPU just fine.
(3) Phone Charging is Intermittent: I have trouble finding a trend with this one. If I toggle Fast Charge (Off or On), my phone will no longer charge. This is fixed by powering off the phone with the cable plugged in. At that point the white battery icon appears and the phone begins charging. If I power the phone back on, the phone will continue to charge but will not be recognized as a USB device.
Here is what I have tried over the past 2 days:
(1) Both GNEX Toolkits: With no USB connectivity, adb and fastboot are not options. This option becomes unavailable with no usb. Have tried both.
(2) ODIN: Phone is not recognized by ODIN tool.
(3) Cleaning USB/Headphone Ports: This produced some interesting black stuff, but no results.
(4) Clean Flash of PE 4/16 Build: Wipe data/cache/dalvik and re-flash. Same problem.
(5) Clean Flash of Stock Rooted Build: Wipe data/cache/dalvik and flash. Same problem.
(6) Mobile ODIN: Cannot locate the tar balls for a stock 4.2.2 factory flash. Have found the necessary files for 4.0.2, but these will not flash in Mobile ODIN. I have read that you have to be on the same android version as the ODIN tar files you are trying to flash. I think this is my best option at this point, but I cannot for the life of me figure out how to get Mobile ODIN to work.
As far as I can tell this is a software problem that is baked somewhere deep in the phone. Since the USB and headphone problem started at the same time, I do not believe it to be hardware. My theory is that somehow fast-charge is locked on (?) and my phone is locked to routing the audio to the headset. If I can find a way to completely wipe everything off and start fresh, I believe my problem will be solved.
Does anybody have any ideas what may be going on here and how I may be able to get this phone back to Stock?
tldr; no usb, no headset audio after dirty flash, how do i get back to stock??
In fastboot, there's no fast charge, since there's no Android running aka no Android kernel running.
Sent from my Nexus
bk201doesntexist said:
In fastboot, there's no fast charge, since there's no Android running aka no Android kernel running.
Sent from my Nexus
Click to expand...
Click to collapse
Thanks for the response.
I am running Win7. Like I said, I have tried connecting my wife's Nexus to the same computer and it is recognized as usual. The only reason I thought it had something to do with FastCharge was that toggling it has an effect on the charging capabilities of my phone. When I boot into FastBoot the phone still does not show up in the Toolkit and running any operation in the Toolkit that uses FastBoot gets hung on "waiting for devices."
My latest experiment is to Flash a Nandroid of a Stock Nexus Image. However, I have not been able to find flashable stock image! Seems like something that would have been a common file so if you are aware of any Stock Nandroid Backups I would love to try that.
7ontheline said:
Thanks for the response.
I am running Win7. Like I said, I have tried connecting my wife's Nexus to the same computer and it is recognized as usual. The only reason I thought it had something to do with FastCharge was that toggling it has an effect on the charging capabilities of my phone. When I boot into FastBoot the phone still does not show up in the Toolkit and running any operation in the Toolkit that uses FastBoot gets hung on "waiting for devices."
My latest experiment is to Flash a Nandroid of a Stock Nexus Image. However, I have not been able to find flashable stock image! Seems like something that would have been a common file so if you are aware of any Stock Nandroid Backups I would love to try that.
Click to expand...
Click to collapse
I don't use toolkits, so I don't know how to help there. Does the device get recognized under Device Manager as a fastboot interface? Have you followed http://forum.xda-developers.com/showthread.php?t=1812959? Tried the Universal Naked Drivers?
bk201doesntexist said:
I don't use toolkits, so I don't know how to help there. Does the device get recognized under Device Manager as a fastboot interface? Have you followed http://forum.xda-developers.com/showthread.php?t=1812959? Tried the Universal Naked Drivers?
Click to expand...
Click to collapse
My device does not get recognized within Device Manager. No yellow exclamation mark, no mention of a connected device, nothing. When my wife's Nexus is connected it shows up as expected and communicates just fine via adb. I have followed the guide you mentioned and have installed ROMs many many times with nor problems previously. I have tried the Universal Naked Drivers. I uninstalled all other drivers and installed these. They work as expected with another Nexus, just nothing with mine. Starting to look like I may just be out of luck here.
7ontheline said:
My device does not get recognized within Device Manager. No yellow exclamation mark, no mention of a connected device, nothing. When my wife's Nexus is connected it shows up as expected and communicates just fine via adb. I have followed the guide you mentioned and have installed ROMs many many times with nor problems previously. I have tried the Universal Naked Drivers. I uninstalled all other drivers and installed these. They work as expected with another Nexus, just nothing with mine. Starting to look like I may just be out of luck here.
Click to expand...
Click to collapse
You seem to be confusing stuff... Fastboot is not ADB, and you have to feed the same driver to windows twice.
You've done this? Sure the USB port doesn't have a bent pin or something?
Sent from my Nexus
My phone is doing the exact same thing. Started about 2 weeks ago. I can't remember but I think it started after flashing the latest liquid smooth rom. I don't think it was a dirty flash but hell I can't remember.
Sent from my Galaxy Nexus using xda app-developers app
tdf666 said:
My phone is doing the exact same thing. Started about 2 weeks ago. I can't remember but I think it started after flashing the latest liquid smooth rom. I don't think it was a dirty flash but hell I can't remember.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Let me know if you figure anything out. I am just dealing with it right now using the SoundAbout App and rebooting my phone whenever it won't charge. It is pretty annoying, but I am at a loss for fixes at this point.
I am not really confusing ADB and Fastboot. I understand that they are two separate ways of communicating with the phone via USB. However, as I stated, there is no USB connectivity other than for charging.
I'm at a loss. Then the other day I got down to 13 percent battery and it started shutting off. I think I'm just going to get another phone. This has been the best and worst phone I've ever had.
Sent from my Galaxy Nexus using xda app-developers app