First ROM ive ported for you guys, i searched and i didn't think you guys had Carbon? So i ported it over form that other samsung Device (with Perms Ofcourse)
I love this Rom
Bugs:
- Same as in CM10.1
- Always on Dark Mode :s
( None other that i know of, if so, just report back here! )
Im busy atm so i'll update thread and make it look pretty for you all :3
Screenshots from the OP! http://forum.xda-developers.com/showthread.php?p=40626143#post40626143
Downloads:
I think this is the one xD
Stripped Gapps
Could second Post do screenshots for me, i don't have this device!
First, I will try it later
Screenshot.
hern555 said:
Screenshot.
Click to expand...
Click to collapse
Added SS from SGS+
penguin449 said:
Added SS from SGS+
Click to expand...
Click to collapse
Very nice rom. Thank you so much.
And here pics from Galaxy W:
freinet
Edit: How can I enable root and the Battery loading symbol (loading phone when disabled) is not correct.
carbon rom
hi friends.
Phone galaxy w
Which android version of this rom.The kernel spends more battery.
The idea of using write?I ALPHA CyanogenMod 1.10 (Build 7) use.
Can you compare
Thanks all.
ali7557 said:
hi friends.
Phone galaxy w
Which android version of this rom.The kernel spends more battery.
The idea of using write?I ALPHA CyanogenMod 1.10 (Build 7) use.
Can you compare
Thanks all.
Click to expand...
Click to collapse
Hi, friend! This ROM is based on CM10.1 so it is 4.2.2 as the name of a thread goes.
Again, depending on what is your kernel and especially revision of a display, your battery consumption may differ.
Sent from my GT-I8150 using Tapatalk 4
carbon rom
Hi LeroViten.
Out of curiosity, I asked.
Waiting for the fact that alpha 8 or Beta 1.
Thanks for the quick reply.
Hey guys,
is there any way to enable the root in this rom?
I installed clean, but root don't works.
Thanks lot
freinet
freinet said:
Hey guys,
is there any way to enable the root in this rom?
I installed clean, but root don't works.
Thanks lot
freinet
Click to expand...
Click to collapse
Do you have superuser or supersu installed? If not, i think you might need to install one of them. You can also check if you have it maybe embedded in Settings menu (like cm10.1).
Sent from my GT-I8150 using xda app-developers app
Thanks for answer. I tried both Superuser and SuperSu, but no effect.
Have you tried this rom and have you root rights?
I like this rom and I'm willing to give it a try but without root I can not use it perfect.
Edit: I tried again, with clean installation but it don't work. In settings menue ther is superuser but no root rights for me.
I noticed that SD-Card and external SD-Card are switched, is this right.
freinet
Thread closed because the OP has been banned for continued failure to follow the rules of XDA.
Related
Hi guys!
CyanogenMod have released cm10.2 for several days on github.
I have tried to build cm10.2 for SU640/P930 with the help of dczz Feishui,Men and so on.
Now,Phone can get into system,but I came across a serious problem:easily hot reboot.
In the days,I don't have time to fix the problems.
so post it out now!
Anyone can change and fix this rom as long as you are interested .
I will open sourse on github.com as soon as I can.
===================================================================
Aug.28:
Today,I will post the cm10.2's sourse of LG su640.
Anyone can download and use as long as you are interested .
My github:https://github.com/joyoki
Noticefication:
1)my sourse come from Rmcc's CM10.1,so Thx again.
2)I have checked Rmcc's cm10.2 sourse of P930,he focus on kernel and display and fix many bugs and errors.
3) I'm freshman,so just can fix display and apps,kernel don't change. you can directly use cm10.1' kernel sourse to build.
4)About P93X,Rmcc have post offical cm10.2 on Aug. 27.I have check his sourse,It's better than mine,so there is no need to post P93X's version.sorry...
Hope can help you!
============================================================
Aug.26:
chalog:
Fix rebooting
Fix Sdcard (Thx for Rmcc)
bugs:
Reported by you
Rom Download:
Su640:
Release3-cm-10.2-20130826-UNOFFICIAL-su640
p93x:
Release3-cm-10.2-20130826-UNOFFICIAL-p930
Rom is Uploading...
==========================================
Aug.25:
Rebooting is Fixed,but not perfect. you should switch on "Disable HW overlays" in Settings-Develoer options.th
This is theView attachment cm10.2-8.20log.txt caught by Feishui about hot rebooting
sdcard is the problem of Fstab. It will be fixed in the later version.
Today, I provide two way to flash the rom:The Backup To Restore and The Flashable ZIP
If you are interested,you can have a try.
At last,Looking forward to Rmcc's offical CM10.2.
Rom Download:
The Backup To Restore
The Flashable ZIP
Notification:
1.The Rom is released for developers and experienced users.You may come across serviral rebooting.
2.If your phone get into system,but easily rebooting, you must go Settings-Developer options to switch on "Disable HW overlays"
3.The Backup To Restore is same with The Flashable ZIP,you don't need to download all.
4.Above all,This is a Dev ,There are many bugs,so I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !
5.About P93X,LU6200 and VS920 ,it is Dev version and is easy to port based on this rom, so don't provide for the moment.
P93X port guide: you just delete "etc" and "boot" of this rom instead of P93X'CM10.1,It will work well.Good luck to you
=========================================
Aug.23:
I have find a method to Fix Rebooting.
I will test again to make sure the method is working. The Fixed Rom will be post as soon as possible.
Please Just Wait a Moment.
New ScreenShot:
http://note.youdao.com/share/?id=387922c50460a2716c8a406dc6809b95&type=note
Rom Download: Please Wait For Fix Rom...
Very cool. Thanks for sharing
Sent from my LG-P930 using Tapatalk 4
Waiting for P930. Anyway thanks for developing.
Delete post
Any responses from susers?
slg1119 said:
Thanks...
I want fix this rom
but....
I'm only have SHW-E210S
Navik, You will check this github
https://github.com/OPENSEMC
https://github.com/Team-Hydra
Click to expand...
Click to collapse
Very thanks.I have check some days ago,but not work.
Now I kil the HW,Hot Rebooting is fixed.
Anyway thx again.
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
notzippy said:
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
Click to expand...
Click to collapse
No, Data work well.you can use hiapn(an apn manage app in google play) to set apn.It's very easy.
I have built P93X's CM10.2 yesterday,but my network has some problem,uploading is very slowly.
if you cant slove ,you can try to port mine to p93x.
Good luck to you!
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
nexwave-mat said:
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
Click to expand...
Click to collapse
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
What kernel is in this rom?
ancifil said:
What kernel is in this rom?
Click to expand...
Click to collapse
Kernel is 3.0.87,wind kernel.
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
navik said:
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
Click to expand...
Click to collapse
Try this, http://pastebin.com/N0qr2nCP
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
Click to expand...
Click to collapse
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 kernels(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
ancifil said:
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 roms(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
Click to expand...
Click to collapse
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
Especially considering they released it for its virtual twin the su640.
Sent from my LG-P930 using xda app-developers app
nexwave-mat said:
Try this, http://pastebin.com/N0qr2nCP
Click to expand...
Click to collapse
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
It's not just LG's problem，It also depend on AT&T.
Sent from my LG-SU640 using xda premium
navik said:
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
Click to expand...
Click to collapse
I'm pretty sure this line is the problem. Just can find the source of the problem.
Code:
[ 27.999572] init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode
Is it just my imagination, but are the only download links for the su640?
Sent from my LG-P930 using xda app-developers app
Hey Guys....
I brought an Unofficial Kitkat 4.4.2 based Carbon & CM 11 Rom for you Guys with Google Services
Its Ported and Mixed ROM, So dont expect everything to be working, But its worth Trying. I hope you will like it too as i liked it also...
Thanks to Carbon Rom Team And CM Team and to me too for Combining... :silly:
Features
Quite Stable & Battery Life is Good
Bugs:
1. 1080p Fc
2. Super User Rights
I tried many ways but didnt get it working...
3. Proximity (Screen dont turns ON after call ends or you put phone away your face.)
You Tell me
Download
Google Drive
If Anyone can solve Proximity and Superuser rights that would be Frigging Awesome.. :laugh:
hasanin.xaidi said:
Hey Guys....
If Anyone can solve Proximity and Superuser rights that would be Frigging Awesome.. :laugh:
Click to expand...
Click to collapse
great job
and Flash this to fix Superuser problem, it's works on my port rom and shoul work on your rom too
nasheich said:
great job
and Flash this to fix Superuser problem, it's works on my port rom and shoul work on your rom too
Click to expand...
Click to collapse
Bro, I tried it too and other methods of pushing SU.. But Apps and ADB are not getting SuperUser Rights...
In no prompt occurs to assign rights/grant...
Seems have to dig more into it...
hasanin.xaidi said:
Bro, I tried it too and other methods of pushing SU.. But Apps and ADB are not getting SuperUser Rights...
In no prompt occurs to assign rights/grant...
Seems have to dig more into it...
Click to expand...
Click to collapse
try DSIXDA's ROM Kitchen
nasheich said:
try DSIXDA's ROM Kitchen
Click to expand...
Click to collapse
Seriously Man, Appreciate your tips and concerns but i tried that too built it with zipalign and su... but rights are not getting assigned to apps and adb....
option is there in settings but when an app require a right, app actually dont get it. e.g titanium/root explorer etc
hasanin.xaidi said:
Seriously Man, Appreciate your tips and concerns but i tried that too built it with zipalign and su... but rights are not getting assigned to apps and adb....
option is there in settings but when an app require a right, app actually dont get it. e.g titanium/root explorer etc
Click to expand...
Click to collapse
Have you tried supersu?
sixline said:
Have you tried supersu?
Click to expand...
Click to collapse
Tried that too Bro...
the battery drains so fast, bro. I've used this ROM for 2 days, everything's quite good but the battery life (when phone is idle) is really bad
ducanhle said:
the battery drains so fast, bro. I've used this ROM for 2 days, everything's quite good but the battery life (when phone is idle) is really bad
Click to expand...
Click to collapse
Awwwmm, It didnt happens to occur with me, did you flashed after 4-wipe? and did you get Root access by any mean?
done
hasanin.xaidi said:
Awwwmm, It didnt happens to occur with me, did you flashed after 4-wipe? and did you get Root access by any mean?
Click to expand...
Click to collapse
I did it carefully and even my friends.
P/s: 5-6 % per hour
(KITKAT) Carbon 4.4.2 based Fully ROOTED
hi, i have worked on this rom and modded it, now this rom has Root,
download link
https://drive.google.com/file/d/0B7x-G59HLmofdXVqOTEzbTdpT2s/edit?usp=sharing
abuulala said:
hi, i have worked on this rom and modded it, now this rom has Root,
download link
https://drive.google.com/file/d/0B7x-G59HLmofdXVqOTEzbTdpT2s/edit?usp=sharing
Click to expand...
Click to collapse
Will try this. Even my old DHD got 4.4.4 and ART is really awesome.
Thanks for miroslav_mm's kernel source .
change log(the same with miroslav_mm)
Changes in the system:
* Mass Updates CM;
* Update to Android 4.4.4 - KTU84P
* Bionic NEON optimization;
* Fix ffmpeg codec conflicts;
* Etc.
Click to expand...
Click to collapse
BUGS:
1.Front camera is not working,
2.weakness vibrator
3.report to me
Installation Instructions:
1.update your recovery to 6.0.4.x
2. Put the files on SD card.
3. Reboot to recovery.
4. Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
5. Flash ROM
6. Reboot
Click to expand...
Click to collapse
Download link for ROM
http://pan.baidu.com/s/1pJCyvcn
pass: 65am
If you want to support me ,just pay for a cup of cofface (paypal:[email protected]):fingers-crossed::fingers-crossed:
sorry for my poor english
lenghonglin said:
Thanks for miroslav_mm's kernel source .
This rom can normally use,But there still have a little bugs:
1.Front camera is not working,
2.weakness vibrator
3.report to me
Click to expand...
Click to collapse
i am using this roms. flashed it yesterday. its good.best thing is based on 3.4 kernel
still.........
rom lags some time...but its fully functional for daily use,
1. Camera working good full hd supported. but not better than original lg cam.
2. battery life is better than other cyanogenmod but not better than sphinx 4.1 or v30d roms
3. custom cpu seting.
4. root working
5. what u can do is replace camera with JB custom camera for cyanogenmod, its better.
few screen shots
chinese？
abuulala said:
i am using this roms. Flashed it yesterday. Its good.best thing is based on 3.4 kernel
still.........
Rom lags some time...but its fully functional for daily use,
1. Camera working good full hd supported. But not better than original lg cam.
2. Battery life is better than other cyanogenmod but not better than sphinx 4.1 or v30d roms
3. Custom cpu seting.
4. Root working
5. What u can do is replace camera with jb custom camera for cyanogenmod, its better.
download link for rom
http://pan.baidu.com/s/1pjcyvcn
pass: 65am
u have to flash it through cwm recovery 6.0.4.5
after full 4 wipes
few screen shots
Click to expand...
Click to collapse
中国人？
lenghonglin said:
中国人？
Click to expand...
Click to collapse
i cant understand u. im a Pakistani.
i downloaded it from a chinese site and im using it.
abuulala said:
i cant understand u. im a Pakistani.
i downloaded it from a chinese site and im using it.
Click to expand...
Click to collapse
I am sorry that i think you are chinese ,Why do you konw i post this thread with 3.4 kernel so fast?:laugh:
lenghonglin said:
I am sorry that i think you are chinese ,Why do you konw i post this thread with 3.4 kernel so fast?:laugh:
Click to expand...
Click to collapse
i saw this post on some chinese site. and then used google translator and followed it for few days and got this rom link. its an excellent kit kit rom. best so far. thanks for all the work.
i am using this rom its 3rd day now. everything working great. it is the KITKAT rom we all been waiting for.
abuulala said:
i am using this rom its 3rd day now. everything working great. it is the KITKAT rom we all been waiting for.
Click to expand...
Click to collapse
I will build cm10.1 with 3.4 kernel soon
Link Down, Any Mirror or someone can re-upload it.
Yes, the link is dead. Please upload on mediafire or google drive.
sixline said:
Yes, the link is dead. Please upload on mediafire or google drive.
Click to expand...
Click to collapse
took a long time, due to slow internet.
here it is...............
https://drive.google.com/file/d/0B9raPQozMhCMc2plMVoxSnpJUzA/edit?usp=sharing
OP (or anyone else) have you tried switching to ART? What is the performance and battery life on ART?
sixline said:
OP (or anyone else) have you tried switching to ART? What is the performance and battery life on ART?
Click to expand...
Click to collapse
i was using it on dalvik myself, and dalvik is default setup, has switched to ART to try this feature. Its working great, will assess it and post about it after some use in 1 or 2 days.
ART is running smooth, don't use xposed framework because even in dalvik or ART, device become laggy
Yeah I know that, thanks.
sixline said:
Yeah I know that, thanks.
Click to expand...
Click to collapse
after using ART some softwares become incompatible. like my titanium backup is not running now and Lg JB camera moded for cyanogenmod is not running/ cant install it again.
abuulala said:
took a long time, due to slow internet.
here it is...............
https://drive.google.com/file/d/0B9raPQozMhCMc2plMVoxSnpJUzA/edit?usp=sharing
Click to expand...
Click to collapse
Thanks a lot Buddy, Much Appreciate-able... :cheers: :good:
Still abit laggy and camera is really suck ! But battery is better ...
Sent from my LG-LU6200 using Tapatalk 2
-ss- said:
Still abit laggy and camera is really suck ! But battery is better ...
Sent from my LG-LU6200 using Tapatalk 2
Click to expand...
Click to collapse
change camera to lg JB camera for cyanogen. link in this forum i think sixline rom thread
Q&A for [ROM] Cyanogenmod 11 06/04/2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cyanogenmod 11 06/04/2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
camera
hi. good job
video recorder not working
jocamoaz said:
hi. good job
video recorder not working
Click to expand...
Click to collapse
yeah that is a cm11 bug from before
I tried to (I got the cpu step) rom and I like. But what is the difference between RELEASE 3 and (got the cpu step) and I wonder fix some performance stabilization in Release 3
I wanted to write in that rom's forum but I have written so far
Sorry i cant speak good english, i want to flash this rom to my phone and the phone give it for me : installation aborted status 0. What can i make? my cwm is 6.0.3.2 and i want flash from other 4.4.2 rom.
Thanks for help.
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
devrieshh said:
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
Click to expand...
Click to collapse
can u add a link for me from cwm 6.0.5.3? please. thank you
Starchm said:
can u add a link for me from cwm 6.0.5.3? please. thank you
Click to expand...
Click to collapse
You can get it from this post here
http://forum.xda-developers.com/showthread.php?p=54754255
Sent from my XT1039 using XDA Free mobile app
....ty for link and helps
Hello !
I have recently installed this ROM (Release 4.5 + Video Recording patch). Everything works.
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Future development
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
burnout6010 said:
Hello !
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Click to expand...
Click to collapse
You should install these Gapps: link, it works well.
For CM11, of course.
corlik said:
You should install these Gapps: link, it works well.
For CM11, of course.
Click to expand...
Click to collapse
Thanks for answering.
I flashed a completely fresh install of the ROM with the indicated G-Apps (+CM-Account) and now get "Google Play Services has stopped" errors constantly.
Am I doing something wrong ? I don't understand.
corlik said:
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
Click to expand...
Click to collapse
Sorry for the late reply,
I might continue development for this phone. I might stop after I get a working camera for cm11 (autofocus).
Cloud
who have the latest version, just in another cloud (gdrive, one, mega) and tell me how to update the firmware version of the 2013 s to the final (possibly version bore the other person)
final download
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Cyber Skull said:
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Click to expand...
Click to collapse
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
cvamoose said:
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
as i said im new to this and any suggestions
Q&A for [ROM][OFFICIAL][DISCUSSION] MIUI V6 5.7.2 for Galaxy Nexus (GSM)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][DISCUSSION] MIUI V6 5.7.2 for Galaxy Nexus (GSM). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
New build 5.7.10 is out!
Google Keep
I tried, it worked perfectly. I'm having, all the time, unfortunately the google services has stopped, it's irritating.
L0u156 said:
I tried, it worked perfectly. I'm having, all the time, unfortunately the google services has stopped, it's irritating.
Click to expand...
Click to collapse
Really?
It didn't appear when I use.
What version are you running?
Sent from my LG G3 using XDA Mobile app
The zip is called "gapps_kitkat_minimal-20150410", I used to flash them for all over the time, with KK roms, and have not noticed this message. For me the rom with franco kernel is smooth enough, and soo beautiful, I'm in love with the UI. I will try today with another gapps package. Please send me PM, becuause I can not see the posts in this thread.
Sorry for my english.
Have a nice day !
I tried the rom , it's fast enough for daily use and very nice but I was not able to install the franco kernel . The installation hangs . Other kernels can use?
I also had problems connecting the MiBand via bluetooth . Does anyone know help me ?
If I can not solve the problem , unfortunately I can not keep the rom .
Thank you all!
---------- Post added at 11:00 AM ---------- Previous post was at 10:54 AM ----------
I tried the rom , it's fast enough for daily use and very nice but I was not able to install the franco kernel . The installation hangs . Other kernels can use?
I also had problems connecting the MiBand via bluetooth . Does anyone know help me ?
If I can not solve the problem , unfortunately I can not keep the rom .
Thank you all!
3g not working.
Someone had a problem with 3g? Is not working here.
I installed the 5.7.17 version.
3g - Vivo - Brazil
I use Miui 5.7.9 on nexus 5. When selecting the clock widget, it crashes immediately.
Sent from my Nexus 5 using XDA Free mobile app
5.7.24 build
Hi Genie,
i've run 5.7.24 builds, found little problem:
1. latest franco on your 2nd thread working not properly, themes-updater force closing
2. Service provider always show "No Service" at status bar, but actually connect
can you advise how to solve point 2?
I've run 5.7.24 . the ROM is fast , I'm using it with fancy 60. I confirm that there is a root . But battery life is slightly bad.
with franco kernel there is FC me too
Good Work anyway!
@Genie's
it's possible download only the incremental pack and flash it on recovery or i need download the full rom? i run the 24.7 with stock kernel.
if yes, wype only cache and dalvik right?
thanks
Mauritos said:
@Genie's
it's possible download only the incremental pack and flash it on recovery or i need download the full rom? i run the 24.7 with stock kernel.
if yes, wype only cache and dalvik right?
thanks
Click to expand...
Click to collapse
I think you should download the full rom.
나의 SHV-E300S 의 Tapatalk에서 보냄
miui v6 on GNex and Miband
Does anyone tried to connect a Miband under miui v6 ? Is the ble module working ?
thanks
mistervulp said:
Does anyone tried to connect a Miband under miui v6 ? Is the ble module working ?
thanks
Click to expand...
Click to collapse
Yes it working well..i'm running v6 with stock kernel and no problem with connect a miband with ufficial xiaomi app.
Mauritos said:
Yes it working well..i'm running v6 with stock kernel and no problem with connect a miband with ufficial xiaomi app.
Click to expand...
Click to collapse
are you running the latest version ? does the theme and other apps crash without even opening them ?
djkk16 said:
are you running the latest version ? does the theme and other apps crash without even opening them ?
Click to expand...
Click to collapse
Yes, I use the latest version. I had FC when I'm using the francoe kernel. I think the stock kernel is better. or you can try the dirty-v sr that's good too.
Mauritos said:
Yes, I use the latest version. I had FC when I'm using the francoe kernel. I think the stock kernel is better. or you can try the dirty-v sr that's good too.
Click to expand...
Click to collapse
so you are using it on ext4 data ?
djkk16 said:
so you are using it on ext4 data ?
Click to expand...
Click to collapse
Yep..i tried f2fs a time ago with another rom but not seemed better..so i use ext4 with lagfix after a flash.
@Genie's
I'm using v7... Very smooth!
You are speak about a tips:
- use kernel dirty v but i have much reboot with it.
- what are L speed tweek? ?
Thank You so much.
f2fs problem
with f2fs on data and cache and dirtyV- not booting, waiting for a 20 min on MI logo ((( please help.