Is there any kernel or patch I can use to add Ethernet to a ROM. I don't care stock or not. I know when I had the Asus tablet to add the support.
Any help would be great
Sent from my SGH-T889 using xda premium
gspro2000 said:
Is there any kernel or patch I can use to add Ethernet to a ROM. I don't care stock or not. I know when I had the Asus tablet to add the support.
Any help would be great
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
If you are asking about reverse tether as in sharing internet from you pc to you phone via usb the answer is yes . Look for xposed frameworks and there is a module for this . The xposed module list is in the app section .
I have the nintendo wii usb ethernet adapter plugged into a usb OTG cable into the phone. Yet there is no ethernet section in setting on stock or custom roms. I remember on my asus tablet there was a zip I flashed to add kernal support and add setting apk with those options. Is there anyway to add to this phone so I dont need a laptop and a phone to do my computer work
Sent from my SGH-T889 using xda premium
Related
Hi guys,
is it possible to connect SIII to TV, mice and keyboard at once? Is there a dock out there to make this possible? Will the mice AND keyboard work through Bluetooth when I connect the SIII to TV via MHL adapter?
Thanks in advance.
jegormeister said:
Hi guys,
is it possible to connect SIII to TV, mice and keyboard at once? Is there a dock out there to make this possible? Will the mice AND keyboard work through Bluetooth when I connect the SIII to TV via MHL adapter?
Thanks in advance.
Click to expand...
Click to collapse
Yes use mhl and bt
Sent from my SGH-T999V using xda app-developers app
oreo said:
Yes use mhl and bt
Sent from my SGH-T999V using xda app-developers app
Click to expand...
Click to collapse
does the phone get power trough the mhl->hdmi adapter?
Hi all,
Can somebody confirm that it works and use mhl and bluetooth keyboard and mice? Did someone found dock?
Sent from my GT-I9300 using xda app-developers app
Yes it works but you need a standalone Bluetooth keyboard/mouse as the hdmi will use the micro sd slot so no dongle.
The hdmi has a slot for the phone charger- in fact it won't work without it
What about a dock? Did anybody found one with hdmi or micro usb output so J can connect mhl kabel?
Sent from my GT-I9300 using xda app-developers app
Probably too early the cables only been available for a few weeks. Just dont get anything compatible with s2 as samsung changed the hdmi pin arrangement on s3.
Or you can wait for the allshare cast dongle then you can use usb hub with an OTG setup
Sent from my SGH-T999V using xda app-developers app
oreo said:
Or you can wait for the allshare cast dongle then you can use usb hub with an OTG setup
Sent from my SGH-T999V using xda app-developers app
Click to expand...
Click to collapse
Hi,
can you pls explain more in details?
Thank you
The setup he means is to use the accesory that Samsung will sell (dont know when), to cast your phone screen to your HDTV (up to 1080p) called "all cast share dongle", this connection is wireless so you will be able to connect a keyboard, mouse and HD...using a USB hub and a USB OTG cable.
hey,
since i found everything needed at home to use the s3 as a pc, i posted this up on my blog. it should help you understand a little more i think.
i also made some pics.
http://yannickstechblog.blogspot.com/2012/07/how-to-setup-your-galaxy-s3-as-pc.html
cheers
ycianca said:
hey,
since i found everything needed at home to use the s3 as a pc, i posted this up on my blog. it should help you understand a little more i think.
i also made some pics.
http://yannickstechblog.blogspot.com/2012/07/how-to-setup-your-galaxy-s3-as-pc.html
cheers
Click to expand...
Click to collapse
Nice, that is what I am talking about
Is it possible to somehow adjust the resolution on the monitor, because it is just a big copy of your mobile screen.
If it is possible to make the icons smaller? I want to use my phone for browsing and I dont want huge panel in the browser.
thx
Lukas
not really. but for browsing u can use a browser which uses full screen like the stock one, and request desktop sites.
Is it possible to mirror what's on my phone to my pc, kinda like how HDMI works with a tv...in this case using the DLNA functionality cuz the usb cable lags alot
Sent from my LT18i using xda premium
fabokid5922 said:
Is it possible to mirror what's on my phone to my pc, kinda like how HDMI works with a tv...in this case using the DLNA functionality cuz the usb cable lags alot
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
http://www.google.com.au/url?sa=t&s...xYHACw&usg=AFQjCNFH62C5C2o2rLmqxnHcqEzQbPz_IA
Sent from Xperia Arc S
it doesn't work for me :S, i tried before and i can't connect both. i have blocked my router with mac firewall for wifi, maybe that's why ._.
Hi,
Sometime some simple things make you crazy, I didnt get the answer for "How to use or enable the OTG Cable with I8160". ?
I have absolutely no experiance of making or installing kernel/roms. Please let me know that will I be able to use a simple USB Flashdisk with my I8160 or not.
If not then what could be the reason.
If yes then please guide me for this.
I8160 do not support USB OTG. This was answered hundreds of time on many threads here. Use search button next time.
arroyo said:
I8160 do not support USB OTG. This was answered hundreds of time on many threads here. Use search button next time.
Click to expand...
Click to collapse
It means change the mobile. right. :crying:
Yes it does! Please use the Q and A thread if you want to ask questions!! This is the hundredth time we are mentioning this!
@loof13
Did you managed to connect USB storage or mouse thru USB port in i8160? I did not found anyone who managed to do that. If yes, then it is awesome.
I have OTG cable and my i8160 is not responsing after connecting mouse, keyboard or pendrive. Even with "USB OTG Helper" app. Tried to power connected devices via USB HUB, but it did not helped.
The reason why it is not working ... its because i8160 do not give any power required to power connected devices. Ace 2 cannot work in host mode for USB. Tried this already in GB and JB (MB2 and MB4). Hafidzduddin confirmed that in kernel there is everything that is needed for USB OTG, but probably it is lack of something in hardware.
But all bluetooth mouses and keyboards work good.
arroyo said:
@loof13
Did you managed to connect USB storage or mouse thru USB port in i8160? I did not found anyone who managed to do that. If yes, then it is awesome.
I have OTG cable and my i8160 is not responsing after connecting mouse, keyboard or pendrive. Even with "USB OTG Helper" app. Tried to power connected devices via USB HUB, but it did not helped.
The reason why it is not working ... its because i8160 do not give any power required to power connected devices. Ace 2 cannot work in host mode for USB. Tried this already in GB and JB (MB2 and MB4). Hafidzduddin confirmed that in kernel there is everything that is needed for USB OTG, but probably it is lack of something in hardware.
But all bluetooth mouses and keyboards work good.
Click to expand...
Click to collapse
It was mentioned that it supports OTG. Its just that we needed a kernel and drivers or stuff that would make it possible
Is pressing "THANKS" to hard to do? If you think my post is helpful then click that button! Ungrateful bast***s
That's what I meant
So i will need to have kernel by hafidz.
I searched on forums and found that i have to short pin 4 and pin5 of mini usb connector. Did someone tried for i8160.
Does simple usb flash disk also needs powrr from phone.
Sent from my GT-I8160 using xda app-developers app
husnain.mahmood said:
So i will need to have kernel by hafidz.
I searched on forums and found that i have to short pin 4 and pin5 of mini usb connector. Did someone tried for i8160.
Does simple usb flash disk also needs powrr from phone.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
I remember someone saying that if the phone cannot power the USB device, an external power source should be used. I don't really know what that meant but I'm guessing a USB hub that has a separate power supply.
Sent from my GT-I8160 using xda app-developers app
Ok. So try the kernel by hafidz. Try external power supply.
But does this has been tried by someone with success.
Sent from my GT-I8160 using xda app-developers app
Can u give me link of page.
Sent from my GT-I8160 using xda app-developers app
husnain.mahmood said:
Ok. So try the kernel by hafidz. Try external power supply.
But does this has been tried by someone with success.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Nope. But Xperia phones with the same soc has otg working, i think
Sent from my GT-I8160 using xda app-developers app
USB OTG works right out of the box on Xperia P and Xperia Sola (Nova Thor U8500). My friends in work have themad this function works without any mods with Nokia CA-157 USB-OTG cable. My freiend is even using USB-TV-tuner on his Xperia P. The same cable does not work with Ace 2. Already tried it on GB and leaked JB. I do not believe, that it is only software fault made by Samsung.
Dr01nE said:
I remember someone saying that if the phone cannot power the USB device, an external power source should be used. I don't really know what that meant but I'm guessing a USB hub that has a separate power supply.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
you can use the usb cable extension , hack the cable and give voltage from charger adaptor, etc
sorry for my english
I heared new TMN MC8 rom supports otg cable for Ace 2. But it is not working. Any solution.
Sent from my GT-I8160 using xda app-developers app
hi
husnain.mahmood said:
Ok. So try the kernel by hafidz. Try external power supply.
But does this has been tried by someone with success.
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Hi!! Where can i download that kernel to be able to use otg ?
any news ?
Otg support
Okay, MaclawStudios made CM11 for GT-i8160(i'm running one) and kernel seems to support USB OTG :silly:
Sad is that cable won't work even with hacked cable and external power
Says who kernel works with OTG? Ive read the required pins arent even connected on the motherboard
Sent from my GT-I8160 using Tapatalk
re
in vold.ftab is wriiten that it is needed to define path for OTG so i think its that tto start with
As there are no roms that I am interested in flashing so I have yet to root my phone. So I just wanna ask if OTG cable will work without root, just wanna xfer some files from my phone to a usb stick.
Thanks
Sent from my SM-N900T using XDA Premium 4 mobile app
Yea OTG is supported without root.
I try to use this OTG with my pad but I can't mount with USB flash drives. I also use nexus importer for help but it not work. Help me please. thanks in advance.
Are you on stock LG or an AOSP rom? Only stock rom is reading OTG atm. I believe. There's also the chance that the cable isn't working ofc.
You could try stickmount from the playstore.
Sent from my LG-V500 using XDA Premium 4 mobile app
whoamigriffiths said:
You could try stickmount from the playstore.
Sent from my LG-V500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks mate I'll try now
CuraeL said:
Are you on stock LG or an AOSP rom? Only stock rom is reading OTG atm. I believe. There's also the chance that the cable isn't working ofc.
Click to expand...
Click to collapse
I'm on stock. But It said it error.
What format is stick formatted with? Try a few. Seems weird that it wouldn't work. I honestly expected that you were on a custom rom since it didn't work. I have linked a youtube vid somewhere else where a guy is using storage and hdmi out on stock rom. So it should work.
I dunno. ;/
I use an OTG cable on my stock G Pad with USB adapters and a Logitech wireless mouse dongle and everything works fine. Where are you looking for the drives after you connect them to the device ?
CuraeL said:
What format is stick formatted with? Try a few. Seems weird that it wouldn't work. I honestly expected that you were on a custom rom since it didn't work. I have linked a youtube vid somewhere else where a guy is using storage and hdmi out on stock rom. So it should work.
I dunno. ;/
Click to expand...
Click to collapse
woody1 said:
I use an OTG cable on my stock G Pad with USB adapters and a Logitech wireless mouse dongle and everything works fine. Where are you looking for the drives after you connect them to the device ?
Click to expand...
Click to collapse
Not it works fine with Stick mount.apk
Thanks for your comment