I'm trying unlock the bootloader for the Wildfire S, but I get that error code when I try to use the RUU. I updated my phone when I first got it and the software version ended up being 2.00.1550.07, but the RUU is for version 1.05.1550.00. How do I fix this? And if it's possible, can I just use Super Tools to unlock the bootloader instead?
I have a Metro PCS marvelc version of the phone.
Please search and read. there is a Error 190 fix thread in this forum.
Thank you, but I did search and nothing seemed to help. So, I bit the bullet and skipped the RUU part on the htcdev site and got my token anyway, which unlocked my phone perfectly.
Urgent : Same problem
Hello , I'm having the same promblem . . . I know you've posted this long time ago but can you please tell me how you got to unlock your phone . . I really need this .
Guys,
I urgently need assistance, I really need to have my mobile working very soon!
Heres my issue!
BOOTLOADER IS RELOCKED
and every command I run, I get the following ..
Sending Unlock_code.bin = FAILED DATA TO LARGE
trying to reinstall clockwork
Sending BOOT , then it says FAILED REMOTE not allowed
I am absolutely stuck in the bootloader loop with no recovery or any .IMG working.
Yes I have searched high and low to help me out all day literally all day and it's been stressing me out alot!
Please help!!
Kind regards
SOLVED MY PROBLEM AND MANY OTHERS MIGHT GET HELP FROM THIS.
First of all if you are having the issue I have please follow the next steps.
If you notice when you are in the Bootloader it will say RELOCKED ** SECURITY WARNING ** if so
Run this bat file with the cable connected until the ** SECURITY WARNING DISAPPEARS ** - http://www.speedyshare.com/b3WsH/Fas...y-recharge.bat
It should disappear after one reboot of charging when it does remove the cable and close the BAT file
Reconnect the cable and open a fastboot cmd window and run the "" fastboot flash unlocktoken Unlock_code.bin "" this will then allow write access and you should be able to use your phone again! my CM10 rom is still working and etc
Hope this helps for other people, please message me if i wasn't clear enough in above.
Jadc007 said:
Guys,
I urgently need assistance, I really need to have my mobile working very soon!
Heres my issue!
BOOTLOADER IS RELOCKED
and every command I run, I get the following ..
Sending Unlock_code.bin = FAILED DATA TO LARGE
trying to reinstall clockwork
Sending BOOT , then it says FAILED REMOTE not allowed
I am absolutely stuck in the bootloader loop with no recovery or any .IMG working.
Yes I have searched high and low to help me out all day literally all day and it's been stressing me out alot!
Please help!!
Kind regards
Click to expand...
Click to collapse
you can't flash anything from fastboot if you have locked/relocked bootloader,
glukosio said:
you can't flash anything from fastboot if you have locked/relocked bootloader,
Click to expand...
Click to collapse
ah bugger, can you advise in what I can do please?
I have tried the RUU but it comes with the 140 ERROR
I am really screwing right now, last time I try and root something obviously not meant for me!
Cheers guys
usually when you have error 140 is because you have wrong hboot version (you have to be lower or the same than ruu),
watch in bootloader what hboot do you have and then download ruu from here http://htcruu.com/?dir=Endeavor
check if you have a branded phone or not, and which region (europe, asia...) and download the right one then try again
glukosio said:
usually when you have error 140 is because you have wrong hboot version (you have to be lower or the same than ruu),
watch in bootloader what hboot do you have and then download ruu from here http://htcruu.com/?dir=Endeavor
check if you have a branded phone or not, and which region (europe, asia...) and download the right one then try again
Click to expand...
Click to collapse
Thank you so much for replying with great info!
I am on O2 network and the following details are :
ENDEAVORU
HBOOT-1.12.0000
RADIO-1.1204.90.13
can you let me know which one from that link you post would be mine? as I can only see one O2 link.
At the moment I am charging the phone via that BATCH file that constantly reboots the phone so it's taking a while!
thank you so much again for replying, my family can't even contact me at the moment how important it is!
Cheers buddy
The one I used was RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe but this one gave me the error code!
thank you guys
Jadc007 said:
The one I used was RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe but this one gave me the error code!
thank you guys
Click to expand...
Click to collapse
Bump
Jadc007 said:
The one I used was RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed.exe but this one gave me the error code!
thank you guys
Click to expand...
Click to collapse
which error you have?
glukosio said:
which error you have?
Click to expand...
Click to collapse
The error I get using the above RUU is the 140 code ... im sure i am using the right RUU?
please help, need to contact home!
Jadc007 said:
The error I get using the above RUU is the 140 code ... im sure i am using the right RUU?
please help, need to contact home!
Click to expand...
Click to collapse
When I load the RUU.EXE it says my current version is 2.17 and obviously the above RUU is older and I think this is why it does not work,
can anybody suggest something please?!
Jadc007 said:
When I load the RUU.EXE it says my current version is 2.17 and obviously the above RUU is older and I think this is why it does not work,
can anybody suggest something please?!
Click to expand...
Click to collapse
error 140 is usually with wrong hboot version, so try do download newer version,
glukosio said:
error 140 is usually with wrong hboot version, so try do download newer version,
Click to expand...
Click to collapse
But as I may of said already, I cannot find a RUU that is 2.17 or above for my phone they are all below any idea's where I can get an 2.17 RUU ?
Kind regards
James
thanks again
Anyone help me at all? still stuck
Jadc007 said:
Anyone help me at all? still stuck
Click to expand...
Click to collapse
There is the possibility that the RUU for you is not released .... yet.
Can you unlock your bootloader again with the HTC dev site, did u try that ?
Verstuurd van mijn HTC One X
MarcelHofs said:
There is the possibility that the RUU for you is not released .... yet.
Can you unlock your bootloader again with the HTC dev site, did u try that ?
Verstuurd van mijn HTC One X
Click to expand...
Click to collapse
Yea this is what I am thinking mate, I tried the unlocking procedure again all I got was an error in the fastboot, won't allow me to keep getting the FAILED command write and etc (Unknown error)
I have got a RUU but it's a europe one but it obviously will not work for my O2 network I believe
Jadc007 said:
Guys,
I urgently need assistance, I really need to have my mobile working very soon!
Heres my issue!
BOOTLOADER IS RELOCKED
and every command I run, I get the following ..
Sending Unlock_code.bin = FAILED DATA TO LARGE
trying to reinstall clockwork
Sending BOOT , then it says FAILED REMOTE not allowed
I am absolutely stuck in the bootloader loop with no recovery or any .IMG working.
Yes I have searched high and low to help me out all day literally all day and it's been stressing me out alot!
Please help!!
Kind regards
Click to expand...
Click to collapse
SOLVED MY PROBLEM AND MANY OTHERS MIGHT GET HELP FROM THIS.
First of all if you are having the issue I have please follow the next steps.
If you notice when you are in the Bootloader it will say RELOCKED ** SECURITY WARNING ** if so
Run this bat file until the ** SECURITY WARNING DISAPPEARS ** - http://www.speedyshare.com/b3WsH/Fastboot-battery-recharge.bat
It should disappear after one reboot of charging when it does remove the cable and close the BAT file
Reconnect the cable and open a fastboot cmd window and run the "" fastboot flash unlocktoken Unlock_code.bin "" this will then allow write access and you should be able to use your phone again! my CM10 rom is still working and etc
Hope this helps for other people, please message me if i wasn't clear enough in above.
You are a lifesaver mate, that pulled me out of a big hole.
jag233 said:
You are a lifesaver mate, that pulled me out of a big hole.
Click to expand...
Click to collapse
Glad I could be of some assistance for you and you are welcome buddy
Hey, sorry to bring this up again, but I did what the OP said. I unlocked the the bootloader again, and got rid of the security warning, but I still cannot get past the "htc quietly brilliant" screen. Factory reseting won't work, and recovery will just reboot the device only to get it stuck the way I mentioned before. Any help, anyone?
mortix02 said:
Hey, sorry to bring this up again, but I did what the OP said. I unlocked the the bootloader again, and got rid of the security warning, but I still cannot get past the "htc quietly brilliant" screen. Factory reseting won't work, and recovery will just reboot the device only to get it stuck the way I mentioned before. Any help, anyone?
Click to expand...
Click to collapse
Install this recovery use command fastboot flash recovery recovery.img take the recovery.img inside the zip arhive
after this mount your sd card copy rom of your chice and flash it via recovery don't forget to flash boot.img inside the rom arhive with command fastboot flash boot boot.img
Hey Everybody ....
Im Just Looking For A Box That Support Erase, Full Flash And Unlocked My HOX
Cuz My HOX Stuck On Fastboot Menu With Locked ( Cant Unlocked It ) .
Why is it stuck there ? Are you on full stock with a locked bootloader (does it literally say LOCKED ?)
If so try factory reset.
Otherwise this might help
http://forum.xda-developers.com/showthread.php?t=1604439
MY HOX Arabic CID J_15 With 1.38 Hboot
I've Unlocked it And Install Android Revolution 9 Suddenly MY HOX Reboot Into Fast Menu And Change From Unlock To Looked ( No System, No Recovery )
I Cant Do Factory Rest ( Nothing Happened Just Reboot Into Fastboot Menu )
But Theres A New Option In Fastboot Menu Called ( Security Reset ) When I Pressed ( KeyCard Checked Failed )
What I Do ?
Sorry For My English
Hmm the only option you have is to try and unlock the bootloader ! Could be a partial bootloader brick.....going from unlocked to locked does not suppose to happen !
Put the unlock code.bin file in the fastboot folder and flash it with this command
Fastboot flash unlocktoken unlock_code.bin
That should bring up the menu on the phone to unlock the bootloader.
Securit reset means that you've messed up some really low level software.
It was in the s-off thread also: http://forum.xda-developers.com/showthread.php?t=2057105&page=21
Matt never got it unlocked again so he just sent it to a repair center. I guess you must do the same.
TToivanen said:
Securit reset means that you've messed up some really low level software.
It was in the s-off thread also: http://forum.xda-developers.com/showthread.php?t=2057105&page=21
Matt never got it unlocked again so he just sent it to a repair center. I guess you must do the same.
Click to expand...
Click to collapse
Ninjaad....was going to say the same after my last reply
One Problem There's No Repair Center In Iraq
Hmm no other phone repair shop where you can inform about the situation ?
I realy need some help with this phone this is what happen , I successfully rooted the phone ( Unlock bootloader , Installed flash recovery & SU )
The next thing i attempt to do was to change the CID to a SuperCID , I was in the ending of all the command and everything was successfull or so i thought , to make a long story short after I attempted to change the CID the device was suppost to restart into recovery , but all i got was a blank black screen ( Bricked ) When I connnect the phone to my PC its dected as ( QHSUSB_DLOAD ) I Have already attempt the PblClear method i got a sucess message but no sighs of life on the phone Here where i got the step for the PblClear (unlimited.io/qhsusbdload ) can anybody help me out here.
And I do understand where I went wrong here I was suppost to turn S-OFF before attempted to change the CID
(P.S my attentions where to unlock the phone with any GSM Sims provider )
Any and all help will be truly appracted .
i have htc one x i bricked my device and i only able to use fastboot and my bootloader is wrongly locked can someone help me.:crying::crying::crying::crying:
pathak414 said:
i have htc one x i bricked my device and i only able to use fastboot and my bootloader is wrongly locked can someone help me.:crying::crying::crying::crying:
Click to expand...
Click to collapse
unlock the bootloader
but i dont have my unlock.bin what i can do now
pathak414 said:
but i dont have my unlock.bin what i can do now
Click to expand...
Click to collapse
Tacke the new one from HTCDEV.COM
i have done that but it shows some error i have pasted the bootloader information also but ot some error every time and i am pasting it right i have unlocked my bootloader previously by using htc one bootloader unlock software. but my phone is not booting because of locked bootloader and i have to flash the boot.img so plz hellp me
pathak414 said:
i have done that but it shows some error i have pasted the bootloader information also but ot some error every time and i am pasting it right i have unlocked my bootloader previously by using htc one bootloader unlock software. but my phone is not booting because of locked bootloader and i have to flash the boot.img so plz hellp me
Click to expand...
Click to collapse
you do something wrong what error post image on the error go in fastboot and run fallow the guide in htcdev,com and when you receive error take printscreen and post the error here.
Are you take new unlock.bin are your battery is full give some info not only I have errors and we must to know what error you have. use charge script to charge your phone.
Try to copy script for htc one more time, it was giving me an error too but copied it the second time ( it was different ) and they resend it.
thank you all i have restored to my htc one x. thank you