Related
1) Backup your System first
(Needed)
2) Now download this file here -
Download (unupdate.zip) search at google.
3) Now copy Unupdate.zip file to the
SD Card. Do Not put it in any folder.
It ain't work.
4) Turn Off your Device and go to
Recovery Mode By Pressing and
Holding this Key Combination
Volume Up + Home Button +
Power Button.
5) Once you entered into the
Recovery Mode. You will see the Blue
Color User Interface where you
can't use Touchscreen. Instead use
" Volume Up and Volume Down to move
Up and Down". And "Home Button to
Select". And "Power Button used to
go Back"
7) After that select "Apply Update
from SDCard" option and choose
"Unupdate.zip".
8) Once Patching was successful. You
have to Reboot your Phone by select
" Reboot System Now".
Vola!!!! You're successfully UnRooted
your phone.
Hope it work
+---------------------------------------+
ADD My Facebook:
[email protected]
Sincerely,
Eirma SyaQieLa
(Malaysia User)
-Nice To Meet You
WARNING!!! This solution provided as is (with no warranty of any kind). Be careful because the described operations rather dangerous and possibly can brick your device. Author is not responsible for your device damage.
IMPORTANT: Usage of this method will affect the state of the "Custom BIN down" counter in your device. This means that you may have problems with official warranty.
Step 1. Getting software. change * with .
1. Install Samsung drivers
http://www*mediafire*com/download/l174yb0369b5ecv/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
2. Download Odin 3.0.7
http://www*mediafire*com/download/1ya3rsdqmd2f9j7/Odin307.zip
3. Download CWM Touch
http://www*mediafire*com/download/ohuwh4lq65atvqv/recovery.tar.md5
4. Download UPDATE-SuperSU-v1.65 package for rooting
http://www*mediafire*com/download/v4q6691tei4l56p/UPDATE-SuperSU-v1.65.zip
5. Download Stock recovery
http://www*mediafire*com/download/mmxdxe5ixbtwkj0/Stock-Recovery_SCH-I759.zip
Step 2. Flash the updates 1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.
2. Extract ODIN 3.0.7.zip, Run ODIN 3.0.7. Don't change any setting (checkboxes ) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38") - if not check if your USB port is functional and Samsung drivers installed correctly.
3. Click on PDA button and chose recovery.tar.md5 file saved during step 1.2. Don't rename or decompress the file - otherwise it will not work. Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.
4. Copy UPDATE-SuperSU-v1.65 and Stock Recovery (CWM_ORI_SCH-I759) package for rooting on SD card External and put the card in device's slot.
5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply zip from SdCard" and press power button to commit operation. Then navigate to UPDATE-SuperSU-v1.65.zip file and press power button again.
6. Done. Your device should be rooted now.
7. If you can't reboot on cwm, Flash "apply zip from SdCard" Stock Recovery (Stock-Recovery_SCH-I759.zip).
Bugs: sometimes ca't reboot in cwm, solution: flash stock recovery (Stock-Recovery_SCH-I759.zip). Please help me to fix it
Thanks Master.
Thanks Master.
On progress ROOT.
need help
i can flash CWM recovery ?
I purchased a used Samsung Galaxy Tab S 10.5 on ebay. Originally it had Android 4.4.2
When I turned it on the device is in retail demo mode.
I have tried the following
1) passwords found on this forum such as (5444, M729Q16K8546, blue, unlimited, easy, galaxy)
2) none of these worked
3) Can not deselect "samsung retail mode" in settings/security/administrators
I tried updating to android 6.0.1 by doing the following but the retail mode is still there
It will not enter into download mode so I did the following
1) Enabled developer options on tablet
2) Used command "adb reboot download"
3) Installed Android 6.0.1 stock rom (T800XXU1CPH7_T800XAR1CPH4_XAR.zip) from sammobile.com
4) Tablet installed and updated Android
5) Retail mode is still there and I still can not get rid of it
Any suggestions are greatly appreciated
Thanks
Never had a retail demo device so my answer may be limited.
Did you tried/are able to install TWRP ?
If you can get TWRP you can try to make a complete factory wipe (Advanced Wipe > check all the boxes > wipe)
Then reboot to download mode (Reboot > Download)
Install the stock rom again
Here is the link: https://forum.xda-developers.com/ga...p-2-8-6-1-unofficial-sm-t800-805-807-t3074633
Flash it via odin
I have tried to do TWRP but can not get it to work. I did not use the apk I was using ODIN on my pc. I was using a TWRP file twrp_3.0.0-0_T800. Not sure if that was the issue or not.
Here are the steps I used:
1) put phone into download mode by using adb on pc (adb reboot download)
2) In ODIN
a) turn off autop reboot
b) select AP file twrp_3.0.0-0_T800
c) wait for success in ODIN
3) tablet never rebooted so I used these keys (press at same time until reboot power+vol down+vol up+home)
4) Tablet rebooted into normal running mode
If you don't enter in recovery right away you flash it the system will revert the changes back. so if the system start to boot normally you need to flash via odin again.
I recommend you to flash the version i linked, as it is more compatible with MM bootloader, also turning off auto reboot is a very important thing.
You need to press all the buttons together power+vol down+vol up+home, (press power last) . when the screen light up release the volume up button (the next to power button) and keep holding the rest.
also...
You can try one trick that i use sometimes, it will give you more time to make the key combination, connect the device to the charger and press and hold power+vol up until the screen turn off, it may show a battery icon, so you disconnect the charger and wait the icon go away. the device should be turned off now. so you basically press and hold vol down+home+power (press power last)
If you done the combination correctly and the screen became black, don't worry, it is a bug, just wait some time (1 min i think) and press home key, it should show the recovery.
It can be a pain in the a** sometimes... but trust me, it generally works.
Ok, so far so good. It took a while but I got into TWRP. But I can't seem to select the image file.
I have it on an external MicroSD in the root. File is called T800XXU1CPH7_T800XAR1CPH4_XAR.zip
I can browse files on the list on the left. But I can't seem to find the file
Did I miss a step?
Somehow after going through menus, it recognized the file
But when I tried to install it, I got these errors
Zip Signature verification failed!
Error installing zip file /sdcard/download/T800XXU1CPH7_T800ZXAR1CPH4_XAR.zip
Could not find 'META-INF/com/google/android/update-binary' in zip file
Error installing zip file /sdcard/download/T800XXU1CPH7_T800ZXAR1CPH4_XAR.zip
you got me wrong, in the TWRP what you need to do is make a complete wipe (Wipe > Advanced Wipe > check all the boxes > wipe)
then you need to enter in download mode. (Reboot > Download)
and flash the rom via odin!
extract the zip on your pc, it should be a .Tar file, select AP mode on odin, select the .tar and flash it in there.
I apologize for the confusion. Those steps worked!!
I think part of the problem is that I did not extract the firmware file. I kept trying to flash the TAR file.
I did a wipe in TWRP
Then rebooted into download mode
Flashed extracted firmware file in ODIN in AP Box
Then the tablet rebooted and was in setup mode like a brand new tablet!! Who hoo.
Works great
Thanks for all the help
THIS MIGHT WORK FOR YOUR DEVICE BUT IF ANY DAMAGE IS DONE TO YOUR DEVICE I AM NOT RESPONSIBLE! AND THIS WILL ONLY WORK ON A10. [SM-A105, SM-A107 AND MORE]
1. You need to install the exact firmware for your model onto your PC. [I recommend a website called updato or install samware and get the firmware there.]
2. Install Odin 3.14.1. If you already have it go to the next step.
3. Unlock your bootloader. If you have done this please go to the next step but if not please go to 3.a
3a. !UNLOCKING YOUR BOOTLOADER WILL FACTORY RESET YOUR DEVICE! - Go to settings and go to about phone, then tap the build number until a message comes on the bottom of the screen saying "You are now a developer!" or something close to that. Go to developer settings by going back to the settings menu and scrolling all the way down to see it. After going to developer options turn on "OEM Unlocking" and tap allow. Also just in case turn on USB Debugging. After that turn off your device. After your phone is turned off press "Volume Up"+ "Volume Down" and plug in a USB from your PC simultaneously, you should see a splash screen with a warning. Hold "Volume Up" for until 7 seconds or less and you should see another warning to confirm you want to unlock the bootloader. Press "Volume Up". You will get a warning when you boot up the phone, just press "Power".
4. After the phone booted up, do the normal setup. Then go to Chrome and download Magisk Manager.
5. Then, go to your pc, and locate the firmware you have downloaded and copy the AP tar file onto your phone.
6. Open magisk manager, tap install, and tap "Select and Patch a File".
7. Select the AP tar file you copied from your PC and wait for the process to be done.
8. You should see a new file called "magisk_patched.tar" and transfer the file to your PC.
9. Open Odin on your PC, and turn off your device and turn it on using "Volume Up", "Volume Down" and USB combination.
10. You should see the same warning sign. Just press "Volume Up" once. Do not hold it just press it once.
11. Your PC will make a sound alerting you that the phone has connected.
12. On the BL section on Odin, open your firmware location and select the file with BL in front of it.
13. On the AP section on Odin, open the "magisk_patched.tar" file you had transferred from the phone.
14. On the CP section on Odin, open your firmware location and select the file with CP in front of it.
15. On the CSC section on Odin, open your firmware location and select the file with CSC in front of it.
16. On Odin, look for a section called Options on the left-hand side. Click options, and turn off auto restart.
17. Click start and wait for the process to finish.
18. After the process is finished, please take the USB out.
19. !!THIS IS THE HARD PART!! - You need to hold down "Volume Down" and "Power". After the screen goes black immediately hold "Volume Up" and "Power". This will direct you to the stock recovery of the phone.
20. If the recovery says, "NO SYSTEM FOUND", don't worry as for then your phone is not A/B partitioned and that's okay and you will need to skip 21 for now and select Reboot System and do the normal setup. But if you can see options in the recovery, please use the "Volume keys" to scroll and "Power" to select. Select Wipe Data and confirm.
21. After the erasing process, just let the phone boot up, and do the setup.
22. Install Magisk Manager if your phone hasn't already downloaded it.
23. !!!FOR THE NON A/B PARTITIONED IF YOU ARE A/B PARTITIONED THEN PLEASE GO TO THE NEXT STEP!!! If you boot up normally - (System without magisk)
Booting up with "Volume Up" and "Power" - (System with magisk)
24. Enjoy Magisk!
If you have any questions please comment them down below!
Thanks to Topjohnwu for creating the method and MAKING magisk.
Downaroo said:
THIS MIGHT WORK FOR YOUR DEVICE BUT IF ANY DAMAGE IS DONE TO YOUR DEVICE I AM NOT RESPONSIBLE! AND THIS WILL ONLY WORK ON A10 ONLY [SM-A105xx].
1. You need to install the exact firmware for your model onto your PC. [I recommend a website called updato or install samware and get the firmware there.]
2. Install Odin 3.14.1. If you already have it go to the next step.
3. Unlock your bootloader. If you have done this please go to the next step but if not please go to 3.a
3a. !UNLOCKING YOUR BOOTLOADER WILL FACTORY RESET YOUR DEVICE! - Go to settings and go to about phone, then tap the build number until a message comes on the bottom of the screen saying "You are now a developer!" or something close to that. Go to developer settings by going back to the settings menu and scrolling all the way down to see it. After going to developer options turn on "OEM Unlocking" and tap allow. Also just in case turn on USB Debugging. After that turn off your device. After your phone is turned off press "Volume Up"+ "Volume Down" and plug in a USB from your PC simultaneously, you should see a splash screen with a warning. Hold "Volume Up" for until 7 seconds or less and you should see another warning to confirm you want to unlock the bootloader. Press "Volume Up". You will get a warning when you boot up the phone, just press "Power".
4. After the phone booted up, do the normal setup. Then go to Chrome and download Magisk Manager.
5. Then, go to your pc, and locate the firmware you have downloaded and copy the AP tar file onto your phone.
6. Open magisk manager, tap install, and tap "Select and Patch a File".
7. Select the AP tar file you copied from your PC and wait for the process to be done.
8. You should see a new file called "magisk_patched.tar" and transfer the file to your PC.
9. Open Odin on your PC, and turn off your device and turn it on using "Volume Up", "Volume Down" and USB combination.
10. You should see the same warning sign. Just press "Volume Up" once. Do not hold it just press it once.
11. Your PC will make a sound alerting you that the phone has connected.
12. On the BL section on Odin, open your firmware location and select the file with BL in front of it.
13. On the AP section on Odin, open the "magisk_patched.tar" file you had transferred from the phone.
14. On the CP section on Odin, open your firmware location and select the file with CP in front of it.
15. On the CSC section on Odin, open your firmware location and select the file with CSC in front of it.
16. On Odin, look for a section called Options on the left-hand side. Click options, and turn off auto restart.
17. Click start and wait for the process to finish.
18. After the process is finished, please take the USB out.
19. !!THIS IS THE HARD PART!! - You need to hold down "Volume Down" and "Power". After the screen goes black immediately hold "Volume Up" and "Power". This will direct you to the stock recovery of the phone.
20. If the recovery says, "NO SYSTEM FOUND", don't worry as for then your phone is not A/B partitioned and that's okay and you will need to skip 21 for now and select Reboot System and do the normal setup. But if you can see options in the recovery, please use the "Volume keys" to scroll and "Power" to select. Select Wipe Data and confirm.
21. After the erasing process, just let the phone boot up, and do the setup.
22. Install Magisk Manager if your phone hasn't already downloaded it.
23. !!!FOR THE NON A/B PARTITIONED IF YOU ARE A/B PARTITIONED THEN PLEASE GO TO THE NEXT STEP!!! If you boot up normally - (System without magisk)
Booting up with "Volume Up" and "Power" - (System with magisk)
24. Enjoy Magisk!
If you have any questions please comment them down below!
Click to expand...
Click to collapse
What about Samsung Galaxy A10s can you tell me please
Ragheb Aloqab said:
What about Samsung Galaxy A10s can you tell me please
Click to expand...
Click to collapse
I am sure you can, but before trying this method please take a full backup
works for a105m bit 5?
daniromerohn said:
works for a105m bit 5?
Click to expand...
Click to collapse
should work, but keep a backup just incase
Downaroo said:
THIS MIGHT WORK FOR YOUR DEVICE BUT IF ANY DAMAGE IS DONE TO YOUR DEVICE I AM NOT RESPONSIBLE! AND THIS WILL ONLY WORK ON A10. [SM-A105, SM-A107 AND MORE]
1. You need to install the exact firmware for your model onto your PC. [I recommend a website called updato or install samware and get the firmware there.]
2. Install Odin 3.14.1. If you already have it go to the next step.
3. Unlock your bootloader. If you have done this please go to the next step but if not please go to 3.a
3a. !UNLOCKING YOUR BOOTLOADER WILL FACTORY RESET YOUR DEVICE! - Go to settings and go to about phone, then tap the build number until a message comes on the bottom of the screen saying "You are now a developer!" or something close to that. Go to developer settings by going back to the settings menu and scrolling all the way down to see it. After going to developer options turn on "OEM Unlocking" and tap allow. Also just in case turn on USB Debugging. After that turn off your device. After your phone is turned off press "Volume Up"+ "Volume Down" and plug in a USB from your PC simultaneously, you should see a splash screen with a warning. Hold "Volume Up" for until 7 seconds or less and you should see another warning to confirm you want to unlock the bootloader. Press "Volume Up". You will get a warning when you boot up the phone, just press "Power".
4. After the phone booted up, do the normal setup. Then go to Chrome and download Magisk Manager.
5. Then, go to your pc, and locate the firmware you have downloaded and copy the AP tar file onto your phone.
6. Open magisk manager, tap install, and tap "Select and Patch a File".
7. Select the AP tar file you copied from your PC and wait for the process to be done.
8. You should see a new file called "magisk_patched.tar" and transfer the file to your PC.
9. Open Odin on your PC, and turn off your device and turn it on using "Volume Up", "Volume Down" and USB combination.
10. You should see the same warning sign. Just press "Volume Up" once. Do not hold it just press it once.
11. Your PC will make a sound alerting you that the phone has connected.
12. On the BL section on Odin, open your firmware location and select the file with BL in front of it.
13. On the AP section on Odin, open the "magisk_patched.tar" file you had transferred from the phone.
14. On the CP section on Odin, open your firmware location and select the file with CP in front of it.
15. On the CSC section on Odin, open your firmware location and select the file with CSC in front of it.
16. On Odin, look for a section called Options on the left-hand side. Click options, and turn off auto restart.
17. Click start and wait for the process to finish.
18. After the process is finished, please take the USB out.
19. !!THIS IS THE HARD PART!! - You need to hold down "Volume Down" and "Power". After the screen goes black immediately hold "Volume Up" and "Power". This will direct you to the stock recovery of the phone.
20. If the recovery says, "NO SYSTEM FOUND", don't worry as for then your phone is not A/B partitioned and that's okay and you will need to skip 21 for now and select Reboot System and do the normal setup. But if you can see options in the recovery, please use the "Volume keys" to scroll and "Power" to select. Select Wipe Data and confirm.
21. After the erasing process, just let the phone boot up, and do the setup.
22. Install Magisk Manager if your phone hasn't already downloaded it.
23. !!!FOR THE NON A/B PARTITIONED IF YOU ARE A/B PARTITIONED THEN PLEASE GO TO THE NEXT STEP!!! If you boot up normally - (System without magisk)
Booting up with "Volume Up" and "Power" - (System with magisk)
24. Enjoy Magisk!
If you have any questions please comment them down below!
Thanks to Topjohnwu for creating the method and MAKING magisk.
Click to expand...
Click to collapse
Does this work on the SM-A102U? Or is there any custom recovery for it?
Tyreethetruth said:
Does this work on the SM-A102U? Or is there any custom recovery for it?
Click to expand...
Click to collapse
Should work with any Samsung galaxy a10, so if it works, enjoy!
Odin keeps crashing when it is nearly complete
I have done this yet however it crashes when I follow your steps with a text box like "Odin Downloader has stop working". I have even gone to the extent where I have turned the magisk_patched.tar into a .tar.md5 file and still the same old error. How do I fix it?
If you require more info, I have a sm-a105fn/ds running android 9. Whenever it is on the "userdata" stage in odin, it crashes. I am using Odin 3 v3.13.1
error in boot and go back to download mode
Not working
I tried and once the flashing was done it rebooted to Download Mode instead and says "error verifying vbmeta image ok_not_signed (3)"
Bad Thread..
My older thread is way mor organized, and doesnt have the 16gb issue that you have... you just copied afanehs thread and made it look bad..
cmz6996 said:
Bad Thread..
My older thread is way mor organized, and doesnt have the 16gb issue that you have... you just copied afanehs thread and made it look bad..
Click to expand...
Click to collapse
I'm sorry, I wasn't copying as I thought of it myself but you're right it has the same steps as afanehs thread. Your thread is more organized and mine doesn't fix the 16gb issue that i had. I'm sorry for the inconvenience
Downaroo said:
I'm sorry, I wasn't copying as I thought of it myself but you're right it has the same steps as afanehs thread. Your thread is more organized and mine doesn't fix the 16gb issue that i had. I'm sorry for the inconvenience
Click to expand...
Click to collapse
No worries, I was abit rough, but try and fix it up. GL In the future!
What to do if it is stuck in recovery in odin. Help me please
.
I have a samsung galaxy a10e sm-a102u and I don't have oem unlocking as an option. Please help
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Nice job
this will work with BTK5 fw?
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
PetiHun08 said:
Bros! are this supposed to work on SM-A505Fn? cuz i tried it and soft bricked my phone -_-
Click to expand...
Click to collapse
UPDAAAATE. Reflashed everytrhing tried again and works on btl3+ sm-a505fn/ds eu model
shoosterjonesr said:
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
Click to expand...
Click to collapse
U need to flash multidisaabler
Will this work on an A50 witn the Android 11/ OneUI 3.1 update? Because I got nothing but errors and bootloops trying to root that, while I had no problems with an Android 10 version.
IF i dont have an sd card can i sideload
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.ifpatched
Credit to mohitmallick17
Click to expand...
Click to collapse
if i have no sdcard can i sideload multidisabler?
PetiHun08 said:
IF i dont have an sd card can i sideload
if i have no sdcard can i sideload multidisabler?
Click to expand...
Click to collapse
after format data just copy multidisabler to internal storage
Ok with mtp obviously. Thank u
redymedan said:
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.
Flash TWRP Instructions:
Make sure the bootloader are unlocked, OEM unlock option is grey out
Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
Select Wipe -> Format data, type 'yes' and confirm
Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
Select Reboot to System
When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
Setup the phone
Rooting if necessary
First time Restart or Power off, make sure the OEM unlocking options is grey out
Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
Select Reboot to - Recovery
Install Magisk Manager
Connect to Internet
Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Done!
DOWNLOAD
Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root - Magisk v21.2 patched
Credit to mohitmallick17
Click to expand...
Click to collapse
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
PetiHun08 said:
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
Click to expand...
Click to collapse
Got back to stock rom. Plz help
PetiHun08 said:
Got back to stock rom. Plz help
Click to expand...
Click to collapse
I think boot.img isthe problem. Maybe can i fiish if i flash twrp with no magsk?(btw my phone has no ramdisk)
Still waitin
Will this work for A50s FN ?
Right now it is flashed with TWRP 3.3.0, but I want to upgrade to Android 11 and is looking for suitable TWRP upgrade. It's my main phone so I can't risk have it bootloop
Hi,I unlocked bootloader,but canot install Twrp.in odin,it always failed.Help ?
What error
PetiHun08 said:
What error
Click to expand...
Click to collapse
In odin it faild,I realise,I'm on exynis version,but cenot finde exynos version of twrp.
I have exynos a50 and mine is forking fine. Ehat error do odin gives you?