My self:
Totally new i came to know about odin Samsung toolkit today (by the way what is difference between Odin and Samsung tool kit). So please be specify your every point.
My phone
Google Nexus i9250 GSM bought in Pakistan. i was using JBSOURCERY custom ROM
prdct name: tuna
varaint --maguro
hw version -9
bootloader version: primekk15
basband vr.I9250xxkb
carrier info:none
Problem.
Stuck in Google logo in black screen with lock sign in startup.
Problem Reason.
I have accidental formatted erased everything.wiped the cache something in clock revover mod now i think i need to start from scratch.
Option available in phone.
I can either go to the stuck Google logo screen or when i hold the power button and volume +- i get odin mode.
Please help.
Regards,
Khan
1) dont use ODIN.
2) if you want stock back, use fastboot and flash the stock images from google
3) if you want a custom rom, use your custom recovery and setup adb in your custom recovery.
Related
Picked up an S3 from someone that I have no idea what they had done to it. Its possible it was flashed with the i9300 noobness. No idea.
It does not boot to any screen. HOWEVER, i can power it up into download mode.
So I tried reflashing some stock images for T-mobile, And it does not boot no matter what I do. It will power up into download mode only.
Recovery mode tries. Itll come up Recovery Booting... for a quick second then go away. But it never comes up. Tried letting go of the buttons at the blue text, etc.. no dice.
I tried erasing NVRAM on the factory image flash and it didnt change anything on the recovery either. tried flashing CWM to recovery, same deal.
Normal boot I get nothing. just a vibrate and black screen. no logos.
Download mode shows this:
ODIN MODE
Product Name: SBG-T999
Custom Binary Download: (Yes) 5
Current Binary: Custom
System Status: Official
Qualcomm Secureboot Enable
It did say Binary Official before I reflashed a kernel or some sorts for tmobile to see if it would boot. same thing.
Any ideas?
Only thing I havent tried is bootchain, and I cannot find the bootchains for T-mobile. I also havent tried reparitioning as I cant find any info or PIT files for this device.
I think its screwed up partitions. I flashed the 4.0.4 ROM onto the device, even used the correct PIT.
Samsung logo will show now for a quick second and shuts down. Try recovery mode, Same thing but shows the blue text with samsung logo. Then shuts down.
I have no way to log the kernel to find out where the fault lies but I bet its messed up partitions.
Does it need jtagged? Reason why I ask is it still goes in download mode, but the PIT didnt help. Neither did nand erase on factory ROM.
Did you ever see it run? Kinda sounds like the internal memory is bad.
Sent from my SGH-T999 using xda premium
I was using PA rom for a few months and everything was fine until my gnex suddenly bootloop for no reason. Wasn't flashing a new rom, or tweaking anything. Phone just crash and when i try to reboot it, it just stuck in a bootloop. Showing google, then animation screen and afterwards reboot again back to google and animation and keeps repeating.
Phone info:
-rooted
-bootloader unlocked
-on custom rom (PA ROM)
Attempt to fix problem:
-flash a diff rom ( still boot loop )
-factory reset,wipe system cache etc. ( still boot loop )
-flash factory image 4.3 ( still boot loop ) [All is done through adb, manually flash each radio,bootloader, system etc one by one ]
-flash factory image 4.0 ( still boot loop )
So currently i'm on stock android, stock recovery, stock bootloader, stock baseband etc. But it is still bootlooping, anyone know what can i do?
ps, i did search through the forum, most people got pass this problem through flashing stock image, but mine doesn't
did you erase and then flash userdata?
Similar to my problem, hope it someone knows an answer.
Same problem!
Not to hijack your thread, but I'm having the same problem -
My phone was charging and working fine. I left the room and came back and the phone was stuck at the "Google" bootloader screen. I pulled the battery and reinserted. It went to the Cyanagen boot animation, then froze. Subsequent battery pulls resulted in it freezing at the Google screen.
I can not access recovery (power + vol up + vol down), but I can access the Odin download screen (power + vol down). Odin will connect to my phone, but I can't reflash the stock firmware. After attempting to flash the firmware my phone shows the phone-triangle-computer screen regardless of what buttons I push during start up. I can still connect to Odin, but can't reflash stock. I receive the "complete write failure" message each time. I've tried switching USB ports and USB cords without success.
Sprint SPH 700
Rooted with bootloader unlocked
Running Cyanagen ROM
Any tips? Do I need to reload the PIT file? Thank you!
TSRibeye said:
Not to hijack your thread, but I'm having the same problem -
My phone was charging and working fine. I left the room and came back and the phone was stuck at the "Google" bootloader screen. I pulled the battery and reinserted. It went to the Cyanagen boot animation, then froze. Subsequent battery pulls resulted in it freezing at the Google screen.
I can not access recovery (power + vol up + vol down), but I can access the Odin download screen (power + vol down). Odin will connect to my phone, but I can't reflash the stock firmware. After attempting to flash the firmware my phone shows the phone-triangle-computer screen regardless of what buttons I push during start up. I can still connect to Odin, but can't reflash stock. I receive the "complete write failure" message each time. I've tried switching USB ports and USB cords without success.
Sprint SPH 700
Rooted with bootloader unlocked
Running Cyanagen ROM
Any tips? Do I need to reload the PIT file? Thank you!
Click to expand...
Click to collapse
I finally got thru the phone to pc fail screen by using a older version of Odin(3.04).Then the flash went thru w/o a hitch. Is your PC recognizing the Phone? If not the drivers may need to be uninstalled and reinstalled. I had to use the samsung usb cord and no other also.
Zepius said:
did you erase and then flash userdata?
Click to expand...
Click to collapse
yup i did that....fastboot erase userdata and also fastboot erase data. still boot loops
Flash factory image via fastboot,
Sent from my maguro using xda app-developers app
bunodosoma said:
I finally got thru the phone to pc fail screen by using a older version of Odin(3.04).Then the flash went thru w/o a hitch. Is your PC recognizing the Phone? If not the drivers may need to be uninstalled and reinstalled. I had to use the samsung usb cord and no other also.
Click to expand...
Click to collapse
Yup, my PC recognizes the phone. I can push partial tar files (for example, recovery only) to the phone just fine. I'll try a different version of Odin. Thanks!
Hi,
Firstly I`m Sorry if There are some thread with same problem. I already tried to solve this for about a week. this is my second choice before i go to service center to fix this.
Here is my problem,
1st, My GNex suddenly Restart by it`s own after i press power key to wake it up. then i leave my phone to boot up. then after a while i came back and see my phone won`t pass the Google Logo. So, i pull out the battery and power up it again.. but then same thing happen. after 30 minutes nothing happen. still stuck at Google Logo.
after that, i tried to wipe the delvik cache using Costume Recovery -TWRP- but.. after i boot up to Recovery Mode. my phone stuck at TWRP logo.
i already try to let my phone on with TWRP. but it`s doing nothing until my GNex runs out of Battery.
Then, I tried to Flash back the stock 4.0.4 STOCK ROM using The Tool Kit but. it`s appear to abort because the Radio Band not same.
later on i tried Flash 4.2.2 Stock Rom, it successfully Flashed but... during flash time.. the Tool Kit take very long time to write System.
after the tool kit finish flashing it. I let it boot by itself, BUT it takes about 1 and half hour to get into "X" logo.
i thought being at "X" nexus logo. my phone will be fine. but not success, I let my phone on "X" logo state for a night, still my phone at "X" logo,
I SINCE that Already Done
1. Flashing all Stock ROM "Takju" - NO SUCCESS-
2. Change Radio band - NO SUCCESS-
3. Change Bootloader - NO SUCCESS-
4. Change Recovery Mod to Stock - NO SUCCESS-
* All method that i found at the internet i already tried, Using ADB and Tool Kit.
PRODUCT NAME - TUNA
VARIANT - MAGURO 16GB
HW VERSION - 9
BOOTLOADER VERSION - PRIMELC03
BASEBAND VERSION - I9250XXLJ1
CARRIER INFO - NONE
SERIAL NUMBER - *Hidden*
SIGNING - PRODUCTION
LOCK STATE - UNLOCKED
Please Someone Help me :'(
have you try flash stock 4.0.4 using fastboot? download image nexus, fastboot flash bootloader, radio, system, boot, and recovery. wipe both cache. this does helps me here, then i flash custom using cwm.
vocyber said:
have you try flash stock 4.0.4 using fastboot? download image nexus, fastboot flash bootloader, radio, system, boot, and recovery. wipe both cache. this does helps me here, then i flash custom using cwm.
Click to expand...
Click to collapse
I ready Done. but the Bootloader Version seems not change and the ROM can not be flash...
:crying:
Hi Guys hoping someone can help me out.
One of my friends who should know better decided to try and flash a custom rom to his N7105 trouble is he used a n7100 twrp which apparently installed and then tried to flash a n7100 rom .
Now his phone is stuck in a boot loop, it sometimes gets as far as the animated boot logo with the blue led pulsing depending on what I last did to it lol. I can get into both download and recovery and the power button isn't stuck.
I don't know what stock version the phone was one when he started messing with it and he is vague about everything HE tried to do to fix it before I got my hands on it. Its entirely possible it was on 4.1.2 to start off with and he's tried to go straight to lollipop does the 7105 need to update in increments? or could he have put a n7100 bootloader on somehow but flashing stock via Odin should fix that right?
I have a memory of people having this sort of problem years ago with HTC and it ended up being a mismatch between the modem and baseband versions or something like that, thoughts?
Here's what I've tried
Odin flash CF-Auto root as it restores stock recovery at least now the PC detects it as t0lte not t03g
1) Recovery wipe data and cache - now only gets as far as the initial samsung galaxy note II screen
2) Odin flashing a 4.1.2 rom from sammobile - no go "unsupported" so has a knox bootloader
3) Odin flashing a 4.3 rom from sammobile - hangs on animated boot logo with the blue led pulsing
tried 1 again same result
4) Odin flashing a 4.4.2 rom from sammobile - hangs on animated boot logo with the blue led pulsing
tried 1 again same result
5) Install firmware via Kies - hangs on animated boot logo with the blue led pulsing
tried 1 again same result
Odin Flash proper version of twrp 2.8.7.0
6)Fix permissions in TWRP - says sucessfull but also has "E: unable to mount data" etc back to the initial galaxy note II screen
7) Flash custom rom via twrp - hangs on animated boot logo with the blue led pulsing
tried 1 again same result
I'm running out of ideas and patience with this thing does anyone have any other ideas for me to try?
After leaving the phone for a while to prevent me from smashing it into a million bits with the biggest hammer I could find I got it working tonight.
Charged the phone up I had to disconnect and reconnect a few times as it said it was 100% on the full screen battery picture then in recovery it said 18% or something
I re-flashed N7105XXUFNL2_N7105H3GFOD1_H3G from sammobile using Odin 1.85 along with the PIT file from this thread checking re-partition (I used a pit file otherwise I'd leave this alone), Auto Reboot, F.Reset time and Phone Bootloader update. This seemed to take longer than previous flashes.
Flashed TWRP 2.8.7.0
formatted Data in TWRP (the advanced one where you have to type yes to confirm). Previously Data was unmountable so I assume the long flash fixed something there.
Wiped cache in TWRP
and rebooted and waited ages and it came to life
Hey. Thought I should flash cyanogenmod 11 into my mom's phone. When I did it, realized that Ace couldn't connect to carrier for some reason. Anyways I decided to get back to stock GB. I've already tried to flash maybe four stock builds of GB and JB (they were all from "SamMobile") through Odin, but none of them really boot up, I get stuck at Samsung logo.
Recovery won't work, even if I flash a new one through odin ( f.e. this one: http://forum.xda-developers.com/showthread.php?t=2532591 )
Download mode does work.
I saw there was this 3-part GB installation file from a russian guy, which I should have used, but it's already deleted in "Yandex". I live in Lithuania, so I'm supposed to use SEB version of firmware. I was wondering could someone reupload it ?
I tried to fix Ace through Kies, but it says that GT-I8160 recovery isn't available for some reason...
Any answers greatly appreciated.
Thanks!
After flashing the sammobile rom with odin, if it doesn't boot, go to recovery (the original one coming with the original rom), and do a factory reset/wipe data. This helped for me.
The problem is that even if I try to enter recovery (power + vol up + home), it stays stuck at samsung logo
You can try to insist by continuing pressing the 3 buttons for recovery even if the phone reboot. If you're stuck in a boot loop, you can also try to remove the battery to switch it off and switch it on again by pressing the 3 buttons.
For me the odin flash of JB rom + recovery clean up always solved the problem. I don't know any other way.
galac44 said:
You can try to insist by continuing pressing the 3 buttons for recovery even if the phone reboot. If you're stuck in a boot loop, you can also try to remove the battery to switch it off and switch it on again by pressing the 3 buttons.
For me the odin flash of JB rom + recovery clean up always solved the problem. I don't know any other way.
Click to expand...
Click to collapse
Do the official ROMs (tar.md5) come with official recovery, or do I have to flash one seperately ?
The official ROM include an official recovery, you don't need to flash another one.
i too needed to go back to the stock from from cm11, because i cannot get wi-fi direct to work.
i flashed an xxmf1 rom, but when the phone rebooted, a message said samsung set up wizard has stopped, and i cannot get past it. this is even after doing a factory reset.
i went back to cm 11, and flashed the stock rom again. this time, the rom flashes in odin, but takes long to go from reset to pass, and windows now says hardware id is missing.
the phone goes black after the samsung logo, and cwm is still installed.
any help would be appreciated.
edit: fixed by flashing the three-part gb rom - http://forum.xda-developers.com/showthread.php?t=2141930
Turns out I disconnected my Ace 2 too early (dammit). As soon as I saw "RESET" in odin, I thought it has finished flashing and I disconnected it before it goes into recovery and flashes everything. Never thought I could be that stupid.
Thanks for replies tho :good::good::good: