Develop Bugs

[REQ] Galaxy Tab unlock

Good evening gentlemen.
The Galaxy S and all its variants have an unlock tool, working on a simple method of fetching the code from one of the files on the phone.
I have also seen that some folks who couldn't quite get the easy method to work would actually change some things in their nv_data.bin, which also allowed them to unlock their phones.
I was hoping that some kindly dev, with far too much time on his hands, would figure out a way to unlock the Galaxy Tab in the same way (seeing as both machiens are so similar).
I will help out with whatever I can - files, adb commands, logs, etc - because I want to give my Tab as a gift to a friend, but the damn thing is locked up tight to Vodafone

Galaxy TAB unlock
I tested variant unlock process from Samsung Galaxy S by generating unlock code but didn't work. Process is based on sgux.exe tool that extract code from nv_data.bin file.
I am waiting for an alternate method to get unlock code for this exciting device.
Thanks in advance

there is a person at android.modaco.com who will get the unlock code for your device if you send him the IMEi no. (he tells you how) and your carrier and location... for a fee... 19 UK... fyi
It's in the sticky post at the top of their Galaxy Tab forum

Is there a free way to do it?
Sent from my SGH-T849 using XDA App

Try this; it worked for me.
http://forum.xda-developers.com/showpost.php?p=8942669&postcount=94

I just think I unlocked mine using a similar method to posted above.
Will post instructions shortly when can confirm. Exciting!
Edit: I wrote up a short guide of what I did here: http://forum.xda-developers.com/showthread.php?t=838424

smithdc said:
I just think I unlocked mine using a similar method to posted above.
Will post instructions shortly when can confirm. Exciting!
Edit: I wrote up a short guide of what I did here: http://forum.xda-developers.com/showthread.php?t=838424
Click to expand...
Click to collapse
I prefer to use a confirmed procedure for using with TAB because I tried some working methods for SGS without results at TAB device.
Thanks

I can confirm that this unlock method works, see the link posted above (I even included some screenshots).

I confirmed this method works fine, my Galaxy tab (SFR reunion island) unlock great, thanks again

Yep, it works, I have my tab unlocked a few weeks ago that way but the serial number of the device on the about turn s into 00000000 .. Only problem I have found. Been using it without any glitch so far but I'm still looking for a way that does not mess the device serial number..

smithdc said:
I can confirm that this unlock method works, see the link posted above (I even included some screenshots).
Click to expand...
Click to collapse
Hi smithdc,
Sorry to do not be confident on your procedure, I purchased device two days ago and really worry about an error may brick it. I follow procedure and can confirm you, it works.
Many thanks

Hi Just got a US T Mobile Tab but if I cant unlock I will have to bring it back

This unlock method works!
smithdc said:
I can confirm that this unlock method works, see the link posted above (I even included some screenshots).
Click to expand...
Click to collapse
Thanks smithdc and helroz! This method worked great for me on portuguese GT! And it's really easy too...
Especially smithdc's guide is very easy to follow!
One thing though: don't bother to buy Root Explorer just to move/copy/delete files. A little linux command line knowledge (easy things like "cd, cp, rm" or even "mkdir" - google it if U don't know what I'm talking about) will do the trick using terminal emulator (check out at market). Also I'm using an amazing little proggie called WiFiKeyboard (market again) to use my keyboard to write out the commands on the GT!
If U want your GT rooted and unlocked this is the way to go! Thanks to all the people who have worked on this!! Cheers!

It unlocked mine but I cant get it to work right wit ATT.
Sent from my Nexus One using XDA App

clausnymark said:
Thanks smithdc and helroz! This method worked great for me on portuguese GT! And it's really easy too...
Especially smithdc's guide is very easy to follow!
One thing though: don't bother to buy Root Explorer just to move/copy/delete files. A little linux command line knowledge (easy things like "cd, cp, rm" or even "mkdir" - google it if U don't know what I'm talking about) will do the trick using terminal emulator (check out at market). Also I'm using an amazing little proggie called WiFiKeyboard (market again) to use my keyboard to write out the commands on the GT!
If U want your GT rooted and unlocked this is the way to go! Thanks to all the people who have worked on this!! Cheers!
Click to expand...
Click to collapse
did it change the serial no. to all zeroes as reported above?
thx.

xexes said:
did it change the serial no. to all zeroes as reported above?
thx.
Click to expand...
Click to collapse
Yes, I does change the serial numbers to all zeroes.
You could probably just roll back your nv_data.bin file/you have the serial on the back of your Tab and there should be a way to just edit it back in, in the future.

And the drawbacks to having all zaros for a temporary serial # would be??
I get the warranty issues but I just wanna make sure im not missing something
Sent from my badass SGH-T849 using XDA App

TainT said:
And the drawbacks to having all zaros for a temporary serial # would be??
I get the warranty issues but I just wanna make sure im not missing something
Sent from my badass SGH-T849 using XDA App
Click to expand...
Click to collapse
Well none so far, or that I can think of.
Even with warranty you could just restore the original files. Or if you had broken it so badly that they couldn't load it up then it wouldn't matter anyway.

Tis what I thought....preciate ya bro!!
And all your work.

Sprint Jelly Bean DIAG mode?

Does anyone know how to put the G Nexus Jelly Bean in Diagnostic Mode, like for flashing it for another carrier, you know, QPST, and all that stuff.
I really need it, like 2 weeks ago i bought a GN and its f*cking awesome, just flashed Jelly Bean, and i cant get it into DIAG Mode.
By the way, ,the following doesnt work:
*#*#8778#*#*
*#*#DIAG#*#*
##DIAG#
##8778#
Anything else?

Damian8a said:
Does anyone know how to put the G Nexus Jelly Bean in Diagnostic Mode, like for flashing it for another carrier, you know, QPST, and all that stuff.
I really need it, like 2 weeks ago i bought a GN and its f*cking awesome, just flashed Jelly Bean, and i cant get it into DIAG Mode.
By the way, ,the following doesnt work:
*#*#8778#*#*
*#*#DIAG#*#*
##DIAG#
##8778#
Anything else?
Click to expand...
Click to collapse
Have you tried the default Android testing menu?
*#*#4636#*#*
*#*#INFO#*#*

Ok, I flashed the Cyanogenmod 9.0 and the *#*#DIAG#*#* actually worked, i get into the menu that let me select between PDA and CDMA MODEM conection.
BUT!! It kinda doesnt connect like a Samsung Modem or anything like that, it shows me two new devices in the Device manager:
1) In the modems it shows a "VIA Telecom USB Modem"
2) In the Other devices shows "INTF2"
And when I try to connect it to DFS or QPST it doesnt work.
Im shure i need some drivers or something, but i dont know which ones.
Any clue?

Damian8a said:
Ok, I flashed the Cyanogenmod 9.0 and the *#*#DIAG#*#* actually worked, i get into the menu that let me select between PDA and CDMA MODEM conection.
BUT!! It kinda doesnt connect like a Samsung Modem or anything like that, it shows me two new devices in the Device manager:
1) In the modems it shows a "VIA Telecom USB Modem"
2) In the Other devices shows "INTF2"
And when I try to connect it to DFS or QPST it doesnt work.
Im shure i need some drivers or something, but i dont know which ones.
Any clue?
Click to expand...
Click to collapse
Oi, hit thanks instead of reply. O well.
I doubt you'll be able to 'flash' the phone for any other carriers through any menu available through the device itself, if that's what you're intending to do.

JaiaV said:
Oi, hit thanks instead of reply. O well.
I doubt you'll be able to 'flash' the phone for any other carriers through any menu available through the device itself, if that's what you're intending to do.
Click to expand...
Click to collapse
Well Its just matter of changing the MSL and the PRL and modifiying the Data parameters and sh*t like that.
And Ive done that like a thousand times with several HTC's Samsungs and Motorolas(Thats actually my second job, seriouslly, i get paid for doing this), I just need to connect it in diag mode and have the drivers.
Which is beeing really hard to do right now
Obviously using my laptop to change the parameters

Same problem
I have been struggling with the same problem for 2 weeks. Have any one found an answer. Can use 'better cut' to write prl, however can use qpst to make internet work.

marjohn1000 said:
I have been struggling with the same problem for 2 weeks. Have any one found an answer. Can use 'better cut' to write prl, however can use qpst to make internet work.
Click to expand...
Click to collapse
Uhh, Well I found an answer, but its not a solution yet.
Check out this thread http://forum.xda-developers.com/showthread.php?t=1696621
It explains why we can't use QPST...
Well it actually doesnt dierctly explain, but we have VIA Chpisets on our phones, instead of the common Qualcomm Chipset, who owns QPST.
But it also give some instructions about a program for VIA chipsets, ETS i think.
I was also reading in a Droid Charge thread (also VIA chipset) that there is a programm named VPST and VPCT or something like that, its like the "QPST" of the "VIA telecom" chipsets.
I'll try it tonight.
Is your gnex Sprint or Verizon?

Have you tested? Did you get it working? I tried but 'getprop' not showing my MSL code.

marjohn1000 said:
Have you tested? Did you get it working? I tried but 'getprop' not showing my MSL code.
Click to expand...
Click to collapse
I've just made the MSL change to 000000, and switched the PRL to my carrier, but just that. I havent had time to work on anything else.
Is your nexus Verizon or Sprint?
If its Verizon your MSL is already 000000, if its Sprint you can get the MSL code with a script made by Viperboy

Damian8a said:
I've just made the MSL change to 000000, and switched the PRL to my carrier, but just that. I havent had time to work on anything else.
Is your nexus Verizon or Sprint?
If its Verizon your MSL is already 000000, if its Sprint you can get the MSL code with a script made by Viperboy
Click to expand...
Click to collapse
I have a Srint. Searching for ViperBoy now.

has there been more progress on this? would love to update prl on cm10

jaron7_11 said:
has there been more progress on this? would love to update prl on cm10
Click to expand...
Click to collapse
Dont know man, I dont have the Nexus anymore, but for the PRL updating theres an app that makes shortcuts, I cant remember the name right now, i think it something like bettercut or something like that.
You can also flash an ICS rom and update the PRL like you would normally do.
Hope i helped

[WIP] How to enable Tmobile AWS 1700 band on S3 I747 and I747M (NV backup method)

At the moment this mod is not sticking after a reboot. I'll keep working on it to see if it can be fixed.
This mod will enable your I747 or I747M to connect to Tmobile's AWS 1700 band. You are doing this at your own risk, and none of the parties involved with creating this mod are responsible for any negative results you might have. If for some reason something does go wrong please post in this thread, and I'm sure plenty of people will be willing to help out. Follow the instructions and enjoy!
SETUP
1. Download one of the NV Data backup files from one of the links below. (Mirrors are welcome if you want to add one.) Thanks to MotoDefier for supplying and editing the T999L backup.
2. Download and install: QPST v2.7.378.zip Thanks to lyriquidperfection for keeping this handy and giving me an already great guide to quote.
3. Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'RNDIS + DM + MODEM' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now in DIAG Mode.
4. Connect your phone to your computer via USB.
5. Start "QPST Configuration" and select the "Ports" tab. Then click on "Add New Port".
6. Select the COM Port that has "USB/QC Diagnostic" next to it and click ok. You should now see your phone in the "Ports" tab.
7. Click the "Start Clients" menu at the top and choose "Software download". QPST software download application should open.
NV DATA BACKUP
1. In QPST Software Download select the "Backup" tab.
2.Press the "Browse" button next to the QCN file pull down and choose a save location for your backup file.
3.Press the "Start" button and wait for it to finish. Once it's done you'll have a backup of your phone's NV Data and IMEI.
Write NV Data
1. In QPST Software Download select the "Restore" tab.
2. Press the "Browse" button next to the QCN file pull down and locate the NV backup you downloaded in the setup section.
3. Press the "Start" button and wait for it to finish. If QPST says that it failed to restart your device just reboot it yourself manually.
4. That's it! You're done!
Restore USB Settings after Backup / Restore:
Dial *#7284# on your phone to access PhoneUtil and select 'Qualcomm USB Settings' at the bottom. Now select 'MTP + ADB' and press 'OK' to return to the previous screen. Now press your 'Back' key to exit PhoneUtil. Your phone is now back to default USB operation.
If you'd like to make sure you are able to use the 1700 band.
1. In your dialer press *#2263# (*#BAND#)
2. Press WCDMA Band Preference then WCDMA 1700.
3. Press the menu key and then select back. You should have an asterisk next to WCDMA 1700 now, and after a few seconds your data connection should start on that band. Enjoy!
4. To revert to full bandwidth: Press the menu key, select back, and then in the service mode menu select automatic.
DOWNLOADS
QPST v2.7.378.zip: http://d-h.st/8vN
Both of these NV Data backup files do the same thing. They just come from different sources.
NV Data backup from T999L: T999LNVData.qcn - 275.50 KB
NV Data backup from I747 using Eng Modem and CSC: I747NV with AWS.qcn - 252.00 KB
CREDITS AND THANKS!
MotoDefier (Huge thank you for giving us this file and teaching me to hate Windows 8!)
DocHoliday77 (Thank you for letting us muck up your awesome T999L thread while we worked this out! Sorry about that!)
Product F(RED) (For sharing this idea)
athlonxp2300 (For getting the ball rolling)
achmedkb01 (For his NV file)
lyriquidperfection )For already having a great QPST guide that helped me write this one, and hosting the QPST download)
sjravi (For starting this with his Note 2 thread and answering my questions about editing the QCN file)
Pat on the back to myself for only mispelling 1 word in this whole op.

Mine!
Got it!
Let me know if I missed anything!

Thanks everyone for their involvement on this mod and of course the op for taking his/her time to write this guide.
PS: any advantage of using one backup or the other ?
Sent from my SGH-T999 using xda app-developers app

jblparisi said:
Thanks everyone for their involvement on this mod and of course the op for taking his/her time to write this guide.
PS: any advantage of using one backup or the other ?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You're welcome!
They're both the exact same file. MotoDefier wasn't sure if he'd keep his up very long, and you never know if and when Dev-host will shut one down for having too many downloads. The more mirrors, the merrier...

Whoops! Wrong button! Nevermind....

Thanks to everyone working on this and the guide. I have a couple of questions. This requires a stock touchwiz rom? The other threads leading up to this one says yes but I didn't see anything mentioned in the guide. I have a unlocked phone via a code from AT&T customer support. Should the unlock remain intact after the qcn restore is done? These might be stupid questions but it's safer to ask now than be sorry later. Cheers.

lensgrabber said:
Thanks to everyone working on this and the guide. I have a couple of questions. This requires a stock touchwiz rom? The other threads leading up to this one says yes but I didn't see anything mentioned in the guide. I have a unlocked phone via a code from AT&T customer support. Should the unlock remain intact after the qcn restore is done? These might be stupid questions but it's safer to ask now than be sorry later. Cheers.
Click to expand...
Click to collapse
Stock Rom? I don't think so... Although, I think I've read in similar threads that having a stock dialer is important for the ussd code that lets you get to Qualcomm settings. Good catch! I'll have to look that up and add it to the op. I'm pretty sure there's an app you can dl for a workaround. Both phones I did this on were running rooted stock, so I didn't think about it.
You should not lose your unlock. I unlocked with this method and did not lose it: http://forum.xda-developers.com/showthread.php?t=2176721
If somehow it goes away, the above method has worked for me 4 out of 4 times already on 4 different phones.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

lensgrabber said:
Thanks to everyone working on this and the guide. I have a couple of questions. This requires a stock touchwiz rom? The other threads leading up to this one says yes but I didn't see anything mentioned in the guide. I have a unlocked phone via a code from AT&T customer support. Should the unlock remain intact after the qcn restore is done? These might be stupid questions but it's safer to ask now than be sorry later. Cheers.
Click to expand...
Click to collapse
upncoming said:
Stock Rom? I don't think so... Although, I think I've read in similar threads that having a stock dialer is important for the ussd code that lets you get to Qualcomm settings. Good catch! I'll have to look that up and add it to the op. I'm pretty sure there's an app you can dl for a workaround. Both phones I did this on were running rooted stock, so I didn't think about it.
You should not lose your unlock. I unlocked with this method and did not lose it: http://forum.xda-developers.com/showthread.php?t=2176721
If somehow it goes away, the above method has worked for me 4 out of 4 times already on 4 different phones.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
First, yes stock rom is required, or at least one with the dialer codes in it which are touchwiz roms. Not being as familiar with samsung touchwiz I could not tell you if there are roms based on it that would still have the dialer codes.
Second this will not change the sim lock statues of the phone, I am glad that you linked to the unlock thread though, might want to add it to the OP because really if you want to do this mod its because you want to run on tmo right?

upncoming said:
Guide is ready to go. Let me know if anybody sees anything I missed. Should be good.
http://forum.xda-developers.com/showthread.php?p=43100050#post43100050
Click to expand...
Click to collapse
If this is true...
upncoming said:
This mod will enable your I747 or I747M to connect to Tmobile's AWS 1700 band.....
Click to expand...
Click to collapse
I think some i747M owners owe some bounty to moto and upncoming. Maybe a little to product f(red) for suggesting it too.
Thanks for your work! And taking the risk. I'll try tomorrow.
Edit... sorry I meant to post this in the original thread.

What if I want to install a non tw rom like cm10.1? Will the nv settings remain intact?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

cdsu23 said:
What if I want to install a non tw rom like cm10.1? Will the nv settings remain intact?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
As long as your not flashing a modem, and most roms do not have a modem included, there should be no problem, it should stick after the new rom is running.
I dont have mine yet to do testing but I like stock like roms, such as cm roms, so I will be testing this extensively when my phone gets here, probably wed.

upncoming said:
Guide is ready to go. Let me know if anybody sees anything I missed. Should be good.
http://forum.xda-developers.com/showthread.php?p=43100050#post43100050
Click to expand...
Click to collapse
If this is true...
upncoming said:
This mod will enable your I747 or I747M to connect to Tmobile's AWS 1700 band.....
Click to expand...
Click to collapse
I think some i747M owners owe some bounty to moto and upncoming. Maybe a little to product f(red) for suggesting it too.
Op should probably be updated to reflect it too.
Thanks for your work! And taking the risk. I'll try tomorrow.

Is it just me or is the mod wiping after reboot?
Someone please verify this.

jblparisi said:
Is it just me or is the mod wiping after reboot?
Someone please verify this.
Click to expand...
Click to collapse
I'm testing this right now, and I'm afraid you might be right.... I'll work on it and see what I can see.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

jblparisi said:
Is it just me or is the mod wiping after reboot?
Someone please verify this.
Click to expand...
Click to collapse
This is what's happening to me

jblparisi said:
Is it just me or is the mod wiping after reboot?
Someone please verify this.
Click to expand...
Click to collapse
Same here...

The first reboot after the nv flash was good. Second reboot lost it. This might also explain why some were having problems trying to flash other roms.

I updated the op. I'll try working on it later to see if it can be fixed.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

hmm, I can not wait for my phone to get here so I can test it out.
By the way I can host a mirror of that .qcn file if you want to add it to the first post, but be warned this is just on my home server and is subject to going down at the wim of well anything, loss of power at home internet outage, what ever, though the server is running 24/7 so it should be good.
http://localserver.no-ip.biz/Public/T999L NV Backup.qcn

jblparisi said:
Is it just me or is the mod wiping after reboot?
Someone please verify this.
Click to expand...
Click to collapse
it's sticking....
i'm not rooted stock 4.1.2...

[Root/Unlock] LG Optimus F6 T-Mobile

Hello users I have recently bought a new T-Mobile LG Optimus F6.
For those of you who may have just purchased one or need one rooted and or unlocked here is how to do it.
Root:
Download MotoChopper.zip that is attatched at the bottom.
Then place your phone in Debugging mode. Also check unknown sources in security.
Unzip the MotoChopper and look for "run.bat"
Once that is all done you should have root access.
Unlock:
I use Blowfish Unlocks. You can use who ever you prefer.
Dial *#06# and that will be your IMEI number.
Next submit for the code and wait.
When it comes back use: SIM_UNLOCK=00000000000000
Now to enter the code you have to put in a non supported sim and dial 2945#*500#
Then choose Network Unlock and enter your code. If the first code doesnt work do not panic.
You have 10 attempts and you usually get back 5 different codes. Try them until one works. But to be sure double check that you submitted the right IMEI to begin with.
Enjoy

works
Although lacking some instruction. You must have lg support software on PC and drivers installed (Google)

redndeyes said:
Although lacking some instruction. You must have lg support software on PC and drivers installed (Google)
Click to expand...
Click to collapse
Correct... here is the link: http://forum.xda-developers.com/showthread.php?t=2210213
What I did after root: Uninstalled all the bloatware... added beats audio, and wifi tether...
Pretty cool phone... I sure do miss my HTC one S

I already sold mine but it was very good. The battery life on it was great. But I moved on to the Note 2 Tmo and hopefully I can sell the Note 2 and get the Note 3
Sent from my SGH-T889 using XDA Premium 4 mobile app

Question about the rooting
Is the rooting all that is needed to enable tethering without the paying of an additional fee to T-Mobile? Basically being held hostage....... and will the phone be capable of OS updating in the future?
Dave
roketteere said:
Hello users I have recently bought a new T-Mobile LG Optimus F6.
For those of you who may have just purchased one or need one rooted and or unlocked here is how to do it.
Root:
Download MotoChopper.zip that is attatched at the bottom.
Then place your phone in Debugging mode. Also check unknown sources in security.
Unzip the MotoChopper and look for "run.bat"
Once that is all done you should have root access.
Unlock:
I use Blowfish Unlocks. You can use who ever you prefer.
Dial *#06# and that will be your IMEI number.
Next submit for the code and wait.
When it comes back use: SIM_UNLOCK=00000000000000
Now to enter the code you have to put in a non supported sim and dial 2945#*500#
Then choose Network Unlock and enter your code. If the first code doesnt work do not panic.
You have 10 attempts and you usually get back 5 different codes. Try them until one works. But to be sure double check that you submitted the right IMEI to begin with.
Enjoy
Click to expand...
Click to collapse

we need a development thread started
See this post request as i have done....
http://forum.xda-developers.com/showthread.php?p=46105044&posted=1#post46105044

linnon said:
See this post request as i have done....
http://forum.xda-developers.com/showthread.php?p=46105044&posted=1#post46105044
Click to expand...
Click to collapse
There is a forum for this device over at this site http://androidforums.com/lg-optimus-f6/
XDA will never happen for this device cause It's not as popular as other device.

How did you guys get Wi-Fi tether to work? Can't get it working after root

Did u wipe after the root to see if it works?
Sent from my SM-N900T using XDA Premium 4 mobile app

LG F6 MetroPCS
Will MotoChopper work on the MetroPCS LG F6?

How to Un-root
redndeyes said:
Although lacking some instruction. You must have lg support software on PC and drivers installed (Google)
Click to expand...
Click to collapse
Do you or anyone know how to un-root the phone aftter running the motochopper? I've been looking everyone on the web and cannot find this. I'm worried in case there is ever a hardware issue that we need to unroot to get serviced.

Blarg3891 said:
Do you or anyone know how to un-root the phone aftter running the motochopper? I've been looking everyone on the web and cannot find this. I'm worried in case there is ever a hardware issue that we need to unroot to get serviced.
Click to expand...
Click to collapse
I just did a factory reset and that removed root

cdusa said:
Will MotoChopper work on the MetroPCS LG F6?
Click to expand...
Click to collapse
No. Not at all
Sent from my LGMS500 using XDA Premium 4 mobile app

what's the difference T-mobile v MetroPCS
Metro sold me the F6 based on the fact it works on the T-mobile networks LTE. However, I am having a hard time living with an unrooted phone so I'm hoping to use motochopper to root. But someone said it will not work. Is there really that much difference between those sold by T-mobile and those from Metro?
I "upgraded" from a Motion to have bigger screen, and now I find out that may have actually been a step down? WTF!?
All I want to do is unbloat and get rid of "insufficient storage" errors. Shouldn't be so tedious!

dirtycar74 said:
...
All I want to do is unbloat and get rid of "insufficient storage" errors. Shouldn't be so tedious!
Click to expand...
Click to collapse
You can root with the vroot method.
There's some questions about what it does exactly but it does work. I should point out that the program and its cousin program are under community investigation due to possibly shady dealings with pulling and pushing files. Its cousin program (kango or something) Has been shown to pull imeid off phones and apparently send them, unencrypted, to a Chinese server.... but it's the only thing I've found to be a proven working root.
Can't unlock boot loader so no custom roms but you can debloat.
I've discovered that both my l9 and my f6 hold onto the storage allotment for moved downloads...
Not sure if you get my drift...
If you download a file to internal and move it to sd it still shows up in "downloads" when you check the storage in your settings.
To solve it open settings/storage/unmount sd and then open downloads under internal storage and delete files you know you moved.
Sent from my LGMS500 using XDA Premium 4 mobile app

With this "vroot", would it be safe to root while disconnected from networks to prevent unauthorized sharing of imei?

I thought of trying that myself but never got around to it.
Sent from my LGMS500 using XDA Premium 4 mobile app

I think cydia impactor might work too. Has anyone tried it? I can't get my hands on an unrooted f6 to give it a shot
Sent from my LGMS500 using xda app-developers app

I am on metropcs an want root too! I will try cydia if it works? cant wait for it to get a lil more exposure an get a rom!

lokipimpin said:
I am on metropcs an want root too! I will try cydia if it works? cant wait for it to get a lil more exposure an get a rom!
Click to expand...
Click to collapse
I know that vroot works. I've been told cydia works. You need to manually install superuser though
Sent from my LGMS500 using Tapatalk

[ROOT] Root your G2 [ATT|VZW|TMO|KT|RGS|BELL|TELUS|OPEN] [Yay!]

Howdy everyone!
Here's another neat root!
What is this?
This is a very simply and easy to use root package for the LG G2.
For now I'm calling it IORoot, despite the fact that it's not really all that deserving of a name.​
Which phones does this support?
Currently the following phones are supported by this root package:
AT&T G2 (D800) - D80010d
Verizon G2 (VS980) - VS98010B (Shipping ROM)
Verizon G2 (VS980) - VS98011A (OTA)
T-Mobile G2 (Shipping ROM)
KT F320k (Shipping ROM)
Rogers D803 (Shipping ROM)
Bell D803 (Shipping ROM)
Telus D803 (Shipping ROM)
OPEN D802 (Shipping ROM)
How do I use this?
Here's a video!
Or, in List Form:
Ensure you have the proper USB drivers installed, and your phone is in the proper mode (For Verizon, use Ethernet mode on the PC settings menu)
Enable Developer Mode on your phone and enable USB Debugging
Extract this zip file somewhere on your PC
Run root.bat
The phone will ask you to disconnect USB, disable USB debugging, then re-enable it and plug the phone back in, do so when prompted
You will then be asked if you would like to have a superuser package installed, which you can accept or decline
Why is it asking if I want to 'trip rootchecker'?
LG's phones come with some software loaded that detects the presence of root on a phone, and invalidates your warranty.
Rooting the phone, by nature, voids your warranty. You can put your phone in a special mode where ADB shell has root permissions, however your phone is not technically 'rooted' by app standards.
You will not be able to use 'root required' apps on your phone if you do not let the root script install Superuser.​
Okay, where do I get this?
See @autoprime's post here: http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869
-- OLD VERSION --
Code:
[url]http://downloads.codefi.re/thecubed/lg_g2/root/ioroot10.zip[/url]
I'll be keeping this link up to date, and changing the version number as new releases come out.
Please do not mirror this link, as it makes my life easier to keep everything under one roof. Thanks!​
News:
NEW UPDATE: Now supports F320k on KT
NEW NEW UPDATE: Supports the VZW OTA, haven't confirmed yet, but this should do the trick.
NEW NEW NEW UPDATE: Thanks to DeamonFish in IRC, we now have a lovely howto video for this root!
NEW NEW NEW NEW UPDATE: Rogers AND Bell AND Telus AND D802 now supported!
Okay guys, so, @autoprime is taking over from here -- see his post http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869 and be sure to thank him!​
Help! I cant even! I accidentally a phone!
Calm down, don't panic. Join us in #lg-g2 on Freenode.
If you're new to IRC, click here http://webchat.freenode.net/?channels=#lg-g2 and it'll connect you to the channel.
I'm IOMonster on IRC, I still don't know why I have two nicknames. Personality disorder I suppose
PLEASE don't PM me on XDA asking for help. My inbox has exploded, and can no longer handle it. I will not be able to help you over PM of any sort (IRC or XDA, or even email).​
Alright guys, let me know if you run into any issues!

thecubed said:
Howdy everyone!
Here's another neat root!
This is confirmed to work for the ATT and Verizon variants, I'll add support for T-Mobile as soon as I get someone in #lg-g2 in Freenode who owns one.
Simple:
Ensure you have ADB drivers installed and USB Debugging enabled
Extract this .zip file somewhere
Run the root.bat file, and read the instructions
During the installation, you'll have to disable USB Debugging and re-enable it, then the app will ask you if you care about rootcheckerd (rctd).
If you don't want your phone to show "rooted" in download mode, or in settings, hit CTRL-C when prompted and you'll just have a root shell through ADB.
Personally, this is enough for me, but if you want full root, press continue and it'll install superuser and a superuser binary for you.
PLEASE do not mirror this! It makes my life easy if I can just edit the file on my server if need be instead of contacting all the mirrors.
Click to expand...
Click to collapse
First!!! Thanks IO and all the devs responsible :highfive:

Can you explain the difference between root shell (leaving it to say unrooted) and "full" root? Will this affect once we get a way to unlock the bootloader or get a recovery for roms? And is there a way to unroot? Thanks for this!!

friguy3 said:
Can you explain the difference between root shell (leaving it to say unrooted) and "full" root? Will this affect once we get a way to unlock the bootloader or get a recovery for roms? And is there a way to unroot? Thanks for this!!
Click to expand...
Click to collapse
Root shell allows you to have root only through ADB. Apps on the phone will not be able to use the root functions of the device if you don't let my script install superuser.

djkinetic said:
First!!! Thanks IO and all the devs responsible :highfive:
Click to expand...
Click to collapse
Most definitely thanks, I see I have USB debugging on but am not sure what is meant by:
command prompt and type adb devices, you should see your Serial Number and online.
Command prompt from where?
Thanks...
Mike

Mikef3j said:
Most definitely thanks, I see I have USB debugging on but am not sure what is meant by:
command prompt and type adb devices, you should see your Serial Number and online.
Command prompt from where?
Thanks...
Mike
Click to expand...
Click to collapse
What?

thecubed said:
Howdy everyone!
Here's another neat root!
Click to expand...
Click to collapse
I dont have the phone (yet) but thanks for rootz!

Awesome. Now I'm gonna go buy a G2. Hehe.

What can we do if we rooted with that weird Chinese exe?
How can I unroot so that I can use this?

thecubed said:
Howdy everyone!
Here's another neat root!
http://downloads.codefi.re/thecubed/lg_g2/root/ioroot2.zip
This is confirmed to work for the ATT and Verizon variants, I'll add support for T-Mobile as soon as I get someone in #lg-g2 in Freenode who owns one.
Simple:
Ensure you have ADB drivers installed and USB Debugging enabled
Extract this .zip file somewhere
Run the root.bat file, and read the instructions
During the installation, you'll have to disable USB Debugging and re-enable it, then the app will ask you if you care about rootcheckerd (rctd).
If you don't want your phone to show "rooted" in download mode, or in settings, hit CTRL-C when prompted and you'll just have a root shell through ADB.
Personally, this is enough for me, but if you want full root, press continue and it'll install superuser and a superuser binary for you.
PLEASE do not mirror this! It makes my life easy if I can just edit the file on my server if need be instead of contacting all the mirrors.
Click to expand...
Click to collapse
what happened to the other thread (which links to this one) in which there were t-mobile variant rooting instructions? i mean i know what happened, they were deleted but why?

scrosler said:
I dont have the phone (yet) but thanks for rootz!
Click to expand...
Click to collapse
You should get it (now)
Also on topic, you need something from every version or just want to know if it works?

Guys im about to get this version soon LG G2 F320S LTE-A 4G LTE,its the korean version of the phone.Does the root works with this version too?Or if not is there any root that works?I hate on screen buttons and the 1st think i want to do when i get it,is to hide them lol

Thanks man! I swear I remember you from the Revolution days and trying to figure out recovery on that thing!

RiverdALIEN said:
what happened to the other thread (which links to this one) in which there were t-mobile variant rooting instructions? i mean i know what happened, they were deleted but why?
Click to expand...
Click to collapse
The other thread contained a link to a root that could possibly compromise your phone's security (and your desktop too, since there's all sorts of other stuff in those exe files).
If someone pops into the #lg-g2 chan with a TMO phone I'll gladly support TMO as well!
If you did happen to use the old root, I'd recommend restoring your phone back to stock with the TOT / KDZ files before applying this root.

stetsonaw said:
Thanks man! I swear I remember you from the Revolution days and trying to figure out recovery on that thing!
Click to expand...
Click to collapse
You got this phone too? Join #lg-g2 ! It'll be like old times!

Mikef3j said:
Most definitely thanks, I see I have USB debugging on but am not sure what is meant by:
command prompt and type adb devices, you should see your Serial Number and online.
Command prompt from where?
Thanks...
Mike
Click to expand...
Click to collapse
You need to have the android sdk installed on your computer. I find it easier to use a distro of linux but windows is fine too. Find android sdk install and make sure adb is in the /platform-tools folder. Then run this adb devices cmd with your phone attached via usb and if it works you should have an rsa security pop up on your phone you have to allow. Then your phone is connected via adb.
Sent from my LG-D800 using xda app-developers app

thecubed said:
The other thread contained a link to a root that could possibly compromise your phone's security (and your desktop too, since there's all sorts of other stuff in those exe files).
If someone pops into the #lg-g2 chan with a TMO phone I'll gladly support TMO as well!
If you did happen to use the old root, I'd recommend restoring your phone back to stock with the TOT / KDZ files before applying this root.
Click to expand...
Click to collapse
how does one "pop into the #lg-g2 chan" ? i have a tmo g2 and i'm no dev or hacker but i'm clever and have been rooting and customizing since 4.0.
all i really want at this point is the ability to remove the bloatware and then possibly unroot

RiverdALIEN said:
how does one "pop into the #lg-g2 chan" ? i have a tmo g2 and i'm no dev or hacker but i'm clever and have been rooting and customizing since 4.0.
Click to expand...
Click to collapse
An easy way would be going here: http://webchat.freenode.net/?channels=#lg-g2 putting in a username, filling out the captcha and then connect.

thecubed said:
If you did happen to use the old root, I'd recommend restoring your phone back to stock with the TOT / KDZ files before applying this root.
Click to expand...
Click to collapse
Sorry... can you please explain how to do this? Or at least point me towards the right posts?

Han Solo 1 said:
What can we do if we rooted with that weird Chinese exe?
How can I unroot so that I can use this?
Click to expand...
Click to collapse
mastertwiz said:
Sorry... can you please explain how to do this? Or at least point me towards the right posts?
Click to expand...
Click to collapse
You will need to go back to stock, and then reroot with this rooter.
If you are on VZW ONLY, follow my guide here: http://forum.xda-developers.com/showthread.php?t=2448960
if you are on anything else, this guide is better to follow, but I had issues with the first section (which is why I wrote my VZW-specific guide) http://forum.xda-developers.com/showthread.php?t=2432476