Time to close this thread as HOX is on official CM nightlies and official CM thread is now renamed to CM-10.2
http://forum.xda-developers.com/showthread.php?t=1786696
CM-10.2 Home Builds. directly from official CM-10.2 source
Repo last synced @ 7:00am GMT+0
Flashable Zip http://d-h.st/fvU
md5 http://d-h.st/4u1
Flash boot.img via fastboot
Check out the changes ,
http://review.cyanogenmod.org/#/q/status:merged+branch:cm-10.2,n,z
Known Bugs
--Most are complaining high battery drain
No other known bugs.
Credits goes to,
cyanogenmod team
and all the other hard working developers who made 4.3 possible for lovely HOX.
I have the same problem. After it boots up, wait 1-2 minutes before starting any app. Then you will be able to start almost anything. Even the camera worked for me. But I am back on cm 10.1 because when the screen is about to turn off, I get the boot animation.
chejo said:
I have the same problem. After it boots up, wait 1-2 minutes before starting any app. Then you will be able to start almost anything. Even the camera worked for me. But I am back on cm 10.1 because when the screen is about to turn off, I get the boot animation.
Click to expand...
Click to collapse
Im can't get any other app to work. as soon as i click on a launcher icon it goes to boot anim. Were you able to pull logcat? if so can you share it. Problem should be the same
Dryize said:
Im can't get any other app to work. as soon as i click on a launcher icon it goes to boot anim. Were you able to pull logcat? if so can you share it. Problem should be the same
Click to expand...
Click to collapse
Nah, usb debugging didn't work. I am compiling again now. I will try to get a logcat in the morning.
you guys compiled cm10.2 or home brewed port?
LorD ClockaN said:
you guys compiled cm10.2 or home brewed port?
Click to expand...
Click to collapse
I compiled it from official cm10.2 sources.
chejo said:
I compiled it from official cm10.2 sources.
Click to expand...
Click to collapse
there are some OPEN patches regarding ICS blobs, maybe those need to be cherry picked
what does logcat say..
I'm just trying to compile CM10.2 so was first asking before uploading here
LorD ClockaN said:
there are some OPEN patches regarding ICS blobs, maybe those need to be cherry picked
what does logcat say..
I'm just trying to compile CM10.2 so twas first asking before uploading here
Click to expand...
Click to collapse
Why ICS patches. CM device tree based on JB right ?
and where can i find these patches?
Sorry if Im being a noob. This is my first try
Dryize said:
Why ICS patches. CM device tree based on JB right ?
and where can i find these patches?
Sorry if Im being a noob. This is my first try
Click to expand...
Click to collapse
Not every blob is from JB. I think the audio blobs are still ICS. Is there any way to enable USB debugging without going to settings (from recovery or something?)?
chejo said:
Not every blob is from JB. I think the audio blobs are still ICS. Is there any way to enable USB debugging without going to settings (from recovery or something?)?
Click to expand...
Click to collapse
probably set in source for usb debugging to be ON by default, don't know where exactly!
Another thing..
Can you guys check in kernel/htc/endavoru what is the last commit??
for some reason for me it pulled cm10.1 branch..
now I set to 10.2 and it compiled sucesfully.
you want me to upload for you to test?
Maybe my PC does magic
chejo said:
Not every blob is from JB. I think the audio blobs are still ICS. Is there any way to enable USB debugging without going to settings (from recovery or something?)?
Click to expand...
Click to collapse
Add this one to your build.prop and reboot:
persist.service.adb.enable=1
Click to expand...
Click to collapse
I tested it with value 0, and my adb was off after reboot.
edit: tested with value 1 and now adb is on.
For those who want to test..
I'm uploading here:
http://tunsd.de/downloads/ICJ/CM-10.2_builds for endeavoru/
will be up in about 30mins..
don't forget to flash 4.3 gapps also:
http://tunsd.de/downloads/ICJ/CM-10.2_builds for m7/gapps-jb43-20130726.zip
I don't have my hox any more.. I gave it to my wife more than 3 months a go, so can't test anything..
LorD ClockaN said:
For those who want to test..
I'm uploading here:
http://tunsd.de/downloads/ICJ/CM-10.2_builds for endeavoru/
will be up in about 30mins..
don't forget to flash 4.3 gapps also:
http://tunsd.de/downloads/ICJ/CM-10.2_builds for m7/gapps-jb43-20130726.zip
I don't have my hox any more.. I gave it to my wife more than 3 months a go, so can't test anything..
Click to expand...
Click to collapse
It did compile successfully for me too. with latest 10.2 device tree, but hox kept restarting whenever i try to open a device. anyway I'll try yours.
Dryize said:
It did compile successfully for me too. with latest 10.2 device tree, but hox kept restarting whenever i try to open a device. anyway I'll try yours.
Click to expand...
Click to collapse
logcat with braindamage's line in build.prop could help
LorD ClockaN said:
For those who want to test...
Click to expand...
Click to collapse
Are there any particular installation? Or as normal as CM 10.1?
pavik62 said:
Are there any particular installation? Or as normal as CM 10.1?
Click to expand...
Click to collapse
you haven't read my post, did you?
I can't test, flash gapps..
full wpe is recommended and a MUST
LorD ClockaN said:
I don't have my hox any more.. I gave it to my wife more than 3 months a go, so can't test anything..
Click to expand...
Click to collapse
Your wife must be a real hard ass, not allowing even one teeny, tiny, 4.3 test?
BOO!
stevethehedge said:
Your wife must be a real hard ass, not allowing even one teeny, tiny, 4.3 test?
BOO!
Click to expand...
Click to collapse
you can read my sig what she is
pavik62 said:
Are there any particular installation? Or as normal as CM 10.1?
Click to expand...
Click to collapse
I was probably a little harsh.
flash like any normal rom
Related
Hello guys !!! This thread is a support thread for the porting of CM9 (compiled from source) to the Optimus Me P350 (codename:pecan).
Member of Android ModTeam
tonystark88 (me)
STATUS OF PROJECT
Finally, after i've revritten device files and added some libraries, this rom boot. In the bottom you can see the list of releases and patches you must apply to launche a old/new release.
WORK
First Boot
Screen
Touch (fully works now)
Bluetooth
HW Acceleration
NEED TO BE VERIFIED OR WORKS PARTIALLY
GPS
WIFI
NOT WORK
Audio
DOWNLOAD AND LINKS
-------------------------------------------------------------------------------------------------------------------------------------------------------
alpha 1 : http://www.mediafire.com/?j5qf5vkhdk1nezr
-------------------------------------------------------------------------------------------------------------------------------------------------------
Screen Patch: http://www.mediafire.com/?eh3ce0xz0y7zuqb
Official pages
Android ModTeam Official Page: http://cyanoportingteam.blogspot.it/
Official G+ Page:https://plus.google.com/u/0/111637310703918579141
INSTALLATION
Go in CWM Recovery
Select install zip from SD Card
Select the zip
Do a wipe data/factory reset
Flash also Screen Patch
Reboot and enjoy this first CM9!
GITHUB SOURCE
soon
SPECIAL THANKS
Special thanks to:
cips gokhle for the Kernel Sources
pax0r: for the start of development for this device
thanks
thanks
what is alpha 0?
thanks
your website still show only u1850 when you will add p350 ?
---------- Post added at 06:38 PM ---------- Previous post was at 06:38 PM ----------
meethere said:
what is alpha 0?
thanks
Click to expand...
Click to collapse
like pre-alpha
yes a pre-alpha, i like call a first boot ROM in this way
tonystark88 i think for touch work you need touch_mcs600.idc i'm using it on my aosp ics alpha 2 try it on next update i uploaded touch_mcs600.idc from aosp ics take a look
http://www.mediafire.com/?v259252ia5iw84e
cips gokhle said:
tonystark88 i think for touch work you need touch_mcs600.idc i'm using it on my aosp ics alpha 2 try it on next update i uploaded touch_mcs600.idc from aosp ics take a look
http://www.mediafire.com/?v259252ia5iw84e
Click to expand...
Click to collapse
yup i think it need because p500 use too
and tonystark88 thanks for taking p350 cm9 project good job
This rom boots, and the touch uses the blue ring, but, it responds better than the AOSP ICS .B
And is a little bit faster.
AitorF1 said:
This rom boots, and the touch uses the blue ring, but, it responds better than the AOSP ICS .B
And is a little bit faster.
Click to expand...
Click to collapse
because it's cm my is pure that you see in galaxy nexus but cm is better then aosp because in cm you can do more THEN pure aosp
cips gokhle said:
because it's cm my is pure that you see in galaxy nexus but cm is better then aosp because in cm you can do more the pure aosp
Click to expand...
Click to collapse
Yes, but the screen flashes, in AOSP not happens.
aitorf1 said:
yes, but the screen flashes, in aosp not happens.
Click to expand...
Click to collapse
what you mean? I can't get you?
thanks all dev to make cm9 work on our device
cips gokhle said:
what you mean? I can't get you?
Click to expand...
Click to collapse
In this rom the screen flashes sometimes, it's a bug i think.
aitorf1 said:
in this rom the screen flashes sometimes, it's a bug i think.
Click to expand...
Click to collapse
ohhh then it's bug
ok all these are good info on this device. About the touch , paxor uses another lib but it's not a problem, i include this in the next release. With time all will be fixed, and i need time because i compile my CM with my laptop (not too fast, only 4GB of RAM).
tonystark88 said:
ok all these are good info on this device. About the touch , paxor uses another lib but it's not a problem, i include this in the next release. With time all will be fixed, and i need time because i compile my CM with my laptop (not too fast, only 4GB of RAM).
Click to expand...
Click to collapse
4gb man its good enough
Sent from my LG-P350 using Tapatalk
nirav07 said:
4gb man its good enough
Sent from my LG-P350 using Tapatalk
Click to expand...
Click to collapse
no ics need more then 4 gb ram i have 8 gb ram and i can compile ics in 20 min
New support site created. All news and daily updates are available on this site:
http://icsforpecan.altervista.org
New release soon, all info on the official site when upload is finished
THE ISSUES WITH THE NIGHTLIES/DAILIES NOT BEEN BOOTING HAS BEEN FIXED! THESE NIGHTLIES/DAILIES WORK PERFECTLY NOW!
Hey guys. I recently decided to do something to pass the time until I get my Nexus 4, in 13 days, as of today. I went with compiling a few AOKP nightlies, since I had a buildbot on my hands with nothing to do with it, haha. Before you guys go off on me saying there won't be any more changes because AOKP isn't doing any more builds until 4.2 gets published to the AOSP source tree, let me tell you this doesn't mean that they won't be making changes and adding features everyday to the source code. It just means no more builds. So, with these nightlies/dailies, you'll get all the newest features and bugfixes on the day they get pushed to the source code of AOKP. I will NOT be providing changelogs at this time, because I'm busy enough with school and homework, and don't want to add flashing a ROM everyday and sifting through the changes to create a log for you guys to it. Also, PLEASE REPORT YOUR EXPERIENCES IN THE THREAD. Anyways, without further ado, here you go.
Features
Compiled directly from AOKP source
Extremely fast
Compiled everyday, so it has the newest features.
Click to expand...
Click to collapse
How to Flash
I AM NOT RESPONSIBLE IF YOU DON'T MAKE A BACKUP OR IF YOUR DEVICE STARTS A WORLD WAR II BEACUSE YOU'RE RUNNING MY NIGHTLIES/DAYLIES.
1. Download the ROM and Gapps
2. Darkside Super Wipe (UNLESS YOU'RE ON CWM 6+. THEN JUST WIPE CACHE, DATA, AND DALVIK.)
3. Wipe Data/Factory reset once again, just to be safe.
4. Flash the ROM
5. Flash the Gapps
6. Darkside Cache Wipe (UNLESS YOU'RE ON CWM 6+. THEN JUST WIPE CACHE.)
7. Reboot and let it sit for 10 minutes.
8. Reboot again, and have fun.
Click to expand...
Click to collapse
Change Log
http://gerrit.sudoservers.com/#/q/status:merged,n,z
Click to expand...
Click to collapse
Downloads
Choose the latest ROM: Link
Gapps: Link
Click to expand...
Click to collapse
First! Nice work! Can't wait to see what this has over regular aokp
Sent from my iPhone kryptonite with H0tcakez
iNeedICS said:
First! Nice work! Can't wait to see what this has over regular aokp
Sent from my iPhone kryptonite with H0tcakez
Click to expand...
Click to collapse
It is regular AOKP, just compiled from source everyday, so all the new features and bugfixes released in the AOKP source everyday are implemented.
KonstantinKeller said:
It is regular AOKP, just compiled from source everyday, so all the new features and bugfixes released in the AOKP source everyday are implemented.
Click to expand...
Click to collapse
Oh ok still nice maybe u should consider adding a personal touch?
Sent from my iPhone kryptonite with H0tcakez
iNeedICS said:
Oh ok still nice maybe u should consider adding a personal touch?
Sent from my iPhone kryptonite with H0tcakez
Click to expand...
Click to collapse
Well, I only have 13 days before I get a new phone, so I don't think it would be worth it, since AOKP is still an amazing ROM.
so how is this any diff from dougshells aokp nightly builds?
tuffballa said:
so how is this any diff from dougshells aokp nightly builds?
Click to expand...
Click to collapse
No cherry picks bro
Sent from my iPhone kryptonite with H0tcakez
tuffballa said:
so how is this any diff from dougshells aokp nightly builds?
Click to expand...
Click to collapse
EDIT: iNeedICS beat me to it. No cherry picks. Pure AOKP. Plus, I'll be attempting to fix a few bugs myself, if any are reported.
thx for good work. i have a problem.?
wipe cache data /storage
flashed rom
flashed gapps
wipe cache and dalvik
reboot then
samsung text and BLACK SCREEN. i ve tried three times same result.
tiger19 said:
thx for good work. i have a problem.?
wipe cache data /storage
flashed rom
flashed gapps
wipe cache and dalvik
reboot then
samsung text and BLACK SCREEN. i ve tried three times same result.
Click to expand...
Click to collapse
How long have you waited at the black screen?
about 5 minutes
tiger19 said:
about 5 minutes
Click to expand...
Click to collapse
Hmm. Interesting. What recovery are you using?
KonstantinKeller said:
Hmm. Interesting. What recovery are you using?
Click to expand...
Click to collapse
twrp 2.3.1.1
tiger19 said:
twrp 2.3.1.1
Click to expand...
Click to collapse
Alright. I'll start another build where it uses a prebuilt kernel instead of building a kernel from source. Maybe that's the issue. Should be built in about 30 minutes.
this time i ve waited more than 5 min. and same
tiger19 said:
this time i ve waited more than 5 min. and same
Click to expand...
Click to collapse
Like I said, starting a new build. Anyone else have this issue?
Sorry about taking so long with the new build. I had to redownload the entire 10gb source code. Starting build now.
I've only gotten one report of this ROM not booting. Someone else who flashed this please give me some feedback here.
KonstantinKeller said:
It is regular AOKP, just compiled from source everyday, so all the new features and bugfixes released in the AOKP source everyday are implemented.
Click to expand...
Click to collapse
Thanks for the break. I will be laying low over the next few days taking care of my new born daughter. I may knock out another cherry build tomorrow but until then, hold it down brother
Sent from my SAMSUNG-SGH-T989 using xda premium
Dougshell said:
Thanks for the break. I will be laying low over the next few days taking care of my new born daughter. I may knock out another cherry build tomorrow but until then, hold it down brother
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
I'll try. I'm currently having issues with the buildbot. Brunch isn't working correctly, and I can't compile without kernel source without it. I don't even know if the issue that guy is having is a legit issue, since nobody is giving me feedback when it has 25 downloads.
Hi guys!
CyanogenMod have released cm10.2 for several days on github.
I have tried to build cm10.2 for SU640/P930 with the help of dczz Feishui,Men and so on.
Now,Phone can get into system,but I came across a serious problem:easily hot reboot.
In the days,I don't have time to fix the problems.
so post it out now!
Anyone can change and fix this rom as long as you are interested .
I will open sourse on github.com as soon as I can.
===================================================================
Aug.28:
Today,I will post the cm10.2's sourse of LG su640.
Anyone can download and use as long as you are interested .
My github:https://github.com/joyoki
Noticefication:
1)my sourse come from Rmcc's CM10.1,so Thx again.
2)I have checked Rmcc's cm10.2 sourse of P930,he focus on kernel and display and fix many bugs and errors.
3) I'm freshman,so just can fix display and apps,kernel don't change. you can directly use cm10.1' kernel sourse to build.
4)About P93X,Rmcc have post offical cm10.2 on Aug. 27.I have check his sourse,It's better than mine,so there is no need to post P93X's version.sorry...
Hope can help you!
============================================================
Aug.26:
chalog:
Fix rebooting
Fix Sdcard (Thx for Rmcc)
bugs:
Reported by you
Rom Download:
Su640:
Release3-cm-10.2-20130826-UNOFFICIAL-su640
p93x:
Release3-cm-10.2-20130826-UNOFFICIAL-p930
Rom is Uploading...
==========================================
Aug.25:
Rebooting is Fixed,but not perfect. you should switch on "Disable HW overlays" in Settings-Develoer options.th
This is theView attachment cm10.2-8.20log.txt caught by Feishui about hot rebooting
sdcard is the problem of Fstab. It will be fixed in the later version.
Today, I provide two way to flash the rom:The Backup To Restore and The Flashable ZIP
If you are interested,you can have a try.
At last,Looking forward to Rmcc's offical CM10.2.
Rom Download:
The Backup To Restore
The Flashable ZIP
Notification:
1.The Rom is released for developers and experienced users.You may come across serviral rebooting.
2.If your phone get into system,but easily rebooting, you must go Settings-Developer options to switch on "Disable HW overlays"
3.The Backup To Restore is same with The Flashable ZIP,you don't need to download all.
4.Above all,This is a Dev ,There are many bugs,so I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !
5.About P93X,LU6200 and VS920 ,it is Dev version and is easy to port based on this rom, so don't provide for the moment.
P93X port guide: you just delete "etc" and "boot" of this rom instead of P93X'CM10.1,It will work well.Good luck to you
=========================================
Aug.23:
I have find a method to Fix Rebooting.
I will test again to make sure the method is working. The Fixed Rom will be post as soon as possible.
Please Just Wait a Moment.
New ScreenShot:
http://note.youdao.com/share/?id=387922c50460a2716c8a406dc6809b95&type=note
Rom Download: Please Wait For Fix Rom...
Very cool. Thanks for sharing
Sent from my LG-P930 using Tapatalk 4
Waiting for P930. Anyway thanks for developing.
Delete post
Any responses from susers?
slg1119 said:
Thanks...
I want fix this rom
but....
I'm only have SHW-E210S
Navik, You will check this github
https://github.com/OPENSEMC
https://github.com/Team-Hydra
Click to expand...
Click to collapse
Very thanks.I have check some days ago,but not work.
Now I kil the HW,Hot Rebooting is fixed.
Anyway thx again.
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
notzippy said:
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
Click to expand...
Click to collapse
No, Data work well.you can use hiapn(an apn manage app in google play) to set apn.It's very easy.
I have built P93X's CM10.2 yesterday,but my network has some problem,uploading is very slowly.
if you cant slove ,you can try to port mine to p93x.
Good luck to you!
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
nexwave-mat said:
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
Click to expand...
Click to collapse
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
What kernel is in this rom?
ancifil said:
What kernel is in this rom?
Click to expand...
Click to collapse
Kernel is 3.0.87,wind kernel.
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
navik said:
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
Click to expand...
Click to collapse
Try this, http://pastebin.com/N0qr2nCP
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
Click to expand...
Click to collapse
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 kernels(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
ancifil said:
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 roms(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
Click to expand...
Click to collapse
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
Especially considering they released it for its virtual twin the su640.
Sent from my LG-P930 using xda app-developers app
nexwave-mat said:
Try this, http://pastebin.com/N0qr2nCP
Click to expand...
Click to collapse
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
It's not just LG's problem，It also depend on AT&T.
Sent from my LG-SU640 using xda premium
navik said:
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
Click to expand...
Click to collapse
I'm pretty sure this line is the problem. Just can find the source of the problem.
Code:
[ 27.999572] init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode
Is it just my imagination, but are the only download links for the su640?
Sent from my LG-P930 using xda app-developers app
Hey everyone! Just wanting to see if anyone wants to test a brand new 4.4.4 AOSP based ROM for the Gnex (toro only). There are a few issues that are already know such as:
BUGS SO FAR:
Screenshot animation looks weird (screenshots turn out just fine though)
Bootani does not work, stays a black screen but it WILL boot.
KernelTweaker setting will FC
If anyone wants to check it out, you can download it here:
http://www.androidfilehost.com/?fid=23578570567716208
I'm calling this a BETA build since not everything works, however, I could consider it a daily driver.
This ROM was built for the Gnex (toro) by me, however, all credit for the source goes to OctOS.
Nice! Pulled my old Galaxy Nexus out of the drawer to test the build on. Please note, you need to be running CWM 6.0.4.3 before you attempt flashing or it's going to fail. Booted and running fine here once that was in place.
Bugs as noted are present on my device as well.
No one else with a Toro wants to test?
Bugs have been updated for Toro in the OP. Still need some people to test this!
Making progress! KernelTweaker option no longer causes an FC. Still working on bootanimation fix and screenshot animation issue.
Deleted. I stink.
RLC44 said:
Deleted. I stink.
Click to expand...
Click to collapse
??? Lol
spc_hicks09 said:
??? Lol
Click to expand...
Click to collapse
I jumped right in to posting that it didn't install before reading the previous post that it wouldn't install through TWRP. I get annoyed when others don't read previous posts... and then did it myself. Therefore, I stink. [emoji39]
RLC44 said:
I jumped right in to posting that it didn't install before reading the previous post that it wouldn't install through TWRP. I get annoyed when others don't read previous posts... and then did it myself. Therefore, I stink. [emoji39]
Click to expand...
Click to collapse
Oh haha! It happens, if you decide to flash, let us know what you think!
spc_hicks09 said:
Oh haha! It happens, if you decide to flash, let us know what you think!
Click to expand...
Click to collapse
Definitely. Will it install with Philz?
RLC44 said:
Definitely. Will it install with Philz?
Click to expand...
Click to collapse
I honestly have no idea, I haven't tested it with other kernels yet. Just the built in kernel.
spc_hicks09 said:
I honestly have no idea, I haven't tested it with other kernels yet. Just the built in kernel.
Click to expand...
Click to collapse
Philz isn't a kernel. It's a different recovery.
RLC44 said:
Philz isn't a kernel. It's a different recovery.
Click to expand...
Click to collapse
That's right lol. It actually should work since it's CWM. Only differences should be touch use.
Only 1 bug remains! The bootanimation is killing me lol. This latest build as of 7/20/2014 is definitely a daily driver. I can add in the bootanimation myself before uploading. Hopefully we can get some more testers for Toro, this build is just about ready to go and is packed with TONS of features!
Can you fix the download link, please? Thank you!
I'll build again now. Upload tonight and post in the morning.
RLC44 said:
Can you fix the download link, please? Thank you!
Click to expand...
Click to collapse
Went ahead and uploaded it and posted the link. I forgot to add the bootanimation though, so it will still be a black screen. Here's the bootanimation if you want to add it manually.
https://dl.dropboxusercontent.com/u/54918541/bootanimation.zip
Put the bootanimation.zip in /system/media
Reboot
Thanks!
RLC44 said:
Thanks!
Click to expand...
Click to collapse
Bootanimation is completely fixed now! Only issue remaining is the screenshot animation. Getting ready to post this now in the development section. Thanks for all the testing!
Deleted.
Man! I've been waiting soo long! Can't wait to try it out.
thools60 said:
Man! I've been waiting soo long! Can't wait to try it out.
Click to expand...
Click to collapse
98% in MEGA download the app on your phone cuz its coming!
Rainbow_Dash said:
98% in MEGA download the app on your phone cuz its coming!
Click to expand...
Click to collapse
Haha! Already ahead of you mate!:laugh:
thools60 said:
Haha! Already ahead of you mate!:laugh:
Click to expand...
Click to collapse
Let me know how it goes.I made like 10 copies/alternatives I have no idea which one I posted.Have fun
Rainbow_Dash said:
Let me know how it goes.I made like 10 copies/alternatives I have no idea which one I posted.Have fun
Click to expand...
Click to collapse
Will do
Sent from my SM-N920C using XDA-Developers mobile app
Rainbow_Dash said:
Have fun
Click to expand...
Click to collapse
Hey there. Im using Cm13 on my G928C for 2 days which is originally by RaymanFX then edited by Battlehero(for N920C). What actually has been changed? I have callin issue btw. It gives shutdown. Thanks.
Konsstantine34 said:
Hey there. Im using Cm13 on my G928C for 2 days which is originally by RaymanFX then edited by Battlehero(for N920C). What actually has been changed? I have callin issue btw. It gives shutdown. Thanks.
Click to expand...
Click to collapse
The kernel is based on original g928f source code(but still uses raymanfx and battle hero's base)And I did not have any issues with the calls.The audio quality was terrible both ways I admit but the device never crashed for the specific reason of calling.
Rainbow_Dash said:
The kernel is based on original g928f source code(but still uses raymanfx and battle hero's base)And I did not have any issues with the calls.The audio quality was terrible both ways I admit but the device never crashed for the specific reason of calling.
Click to expand...
Click to collapse
Thanks man. Seems CM gives different issues per user. I couldnt make any call, not even linked.. Audio quality is ok for me, i mean its normal but sometimes whilst listening music; glitches for a milisecond when press home button, enter an app etc.. The only thing I miss as a major is calling lol, no need a camera though. So I will try this build, thanks again. :good:
Edit: @Rainbow_Dash Awesomeness.. Now I have calling too. Keep this beauty up man. If a tester needed, PM me :good:
@Rainbow_Dash Tried it out and it's amazing to see CM on my phone. Managed to install Slim Gapps mini. But GMS keeps crashing every time u use a Google app. Ofcourse this isn't a daily driver yet but it was really fun testing it. And, as you say, when it's not crashing it's crazy fast. Looking forward to be testing your builds to come, but for now I have to roll back to the second best: Battleheroe's extreme debloated. I need my phone daytime but in the evenings I will test yours. We really need AOSP on our device. Thanks a million for your work. :good::good::good:
Just wanted to give you a quick update that I managed to get the s view working(mine did not work)and the gapps problem is 30%fixed(yes it was the ROMs fault) I will make an update in the near future so stay tuned for an update!
Did I mention it doesn't crash anymore?
Rainbow_Dash said:
Just wanted to give you a quick update that I managed to get the s view working(mine did not work)and the gapps problem is 30%fixed(yes it was the ROMs fault) I will make an update in the near future so stay tuned for an update!
Did I mention it doesn't crash anymore?
Click to expand...
Click to collapse
Your words are like music:good:
Is it okay to use OpenGapps stock package?
Chicken4K said:
Is it okay to use OpenGapps stock package?
Click to expand...
Click to collapse
I found a solution to the gapps problem.At the moment no gapps work without any (google play services has stopped) countinous message.And opengapps even sayed that it isnt compatible.It is an easy fix in build.prop but i need just a little more time
thools60 said:
@Rainbow_Dash Tried it out and it's amazing to see CM on my phone. Managed to install Slim Gapps mini. But GMS keeps crashing every time u use a Google app. Ofcourse this isn't a daily driver yet but it was really fun testing it. And, as you say, when it's not crashing it's crazy fast. Looking forward to be testing your builds to come, but for now I have to roll back to the second best: Battleheroe's extreme debloated. I need my phone daytime but in the evenings I will test yours. We really need AOSP on our device. Thanks a million for your work. :good::good::good:
Click to expand...
Click to collapse
Have you tried ''aroma'' labeled gapps? > http://opengapps.org/?api=6.0&variant=nano I flashed it on the other CM13 rom, no crashes(make sure do not select dialer which is changing framework=causes reboot when you call). I was always using 'aroma-gapps', so that makes sense to have less issue for me(No reboot in sms, No issue/reboot music etc).. So logically, it would work with Dash's build too. Havent had time to try, will let you know after a day/tonight.
Cod Edit: Post closed per OP request.
Rocking TR-oll.
Regards.
Konsstantine34 said:
Have you tried ''aroma'' labeled gapps? > http://opengapps.org/?api=6.0&variant=nano I flashed it on the other CM13 rom, no crashes(make sure do not select dialer which is changing framework=causes reboot when you call). I was always using 'aroma-gapps', so that makes sense to have less issue for me(No reboot in sms, No issue/reboot music etc).. So logically, it would work with Dash's build too. Havent had time to try, will let you know after a day/tonight.
Cod Edit: Post closed per OP request.
Rocking TR-oll.
Regards.
Click to expand...
Click to collapse
Opengapps says somethin like download appropriate gapps for your rom.Any other gapps installs but loops google services has stopped.Again the fix is easy but i dont have acces to a pc at the moment.
Rainbow_Dash said:
Opengapps says somethin like download appropriate gapps for your rom.Any other gapps installs but loops google services has stopped.Again the fix is easy but i dont have acces to a pc at the moment.
Click to expand...
Click to collapse
You have to edit your build.prop in case.. I couldnt flash Xposed with your build, but changed build.prop then flashed. When I try to flash with yours; it says my device is arm, not arm64 etc. I guess it may causes a conflict with Gapps too.
Cod Edit: Post closed per OP request.
Rocking TR-oll.
Regards.
Hi!
Thanks so much for this build!
I've got only one problem..my notification center doesn't pull down..is there any chance to fix it?
I've already tried to reflash the rom, but nothing..
Sorry for my bad english, i'm Italian
Haxmast3r said:
Hi!
Thanks so much for this build!
I've got only one problem..my notification center doesn't pull down..is there any chance to fix it?
I've already tried to reflash the rom, but nothing..
Sorry for my bad english, i'm Italian
Click to expand...
Click to collapse
Notification centre is a known issue.Will fix in near future.Also I fixed the gapps problem and will reupload with fixed build.prop
Rainbow_Dash said:
Notification centre is a known issue.Will fix in near future.Also I fixed the gapps problem and will reupload with fixed build.prop
Click to expand...
Click to collapse
Ok! Thanks so much man!