[Q] Access point are still empty after Define one - Xperia Arc Q&A, Help & Troubleshooting

hi , i want to set access point
i enter all info and then save at the end , but after it i cant see any access point and the access point is still empty !!
what should i do ?

Arioman said:
hi , i want to set access point
i enter all info and then save at the end , but after it i cant see any access point and the access point is still empty !!
what should i do ?
Click to expand...
Click to collapse
When you setup the Access Points DONT GO BACK to save that.Press the settings button (3rd button from left) and then press save.
Then it should save it

UnlimitedRom said:
When you setup the Access Points DONT GO BACK to save that.Press the settings button (3rd button from left) and then press save.
Then it should save it
Click to expand...
Click to collapse
it`s obvous that i must Press the settings button (3rd button from left) and then press save.
and i did it several times but success at all
it`s still blank and empty

Related

SOLVED: How to format Blueangel?

How to format Blueangel?
Answer
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
chk wiki for this
can u give me the link plz
coz i have like 2 or 3 messages programs
and calanders and calculators etc
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
I cant believe you have been a member of this site for nearly two years and you dont even know how to hard reset one of these devices ,but here it is anyway
how to hard reset (format)
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner).
Click to expand...
Click to collapse
i have tried that but it still has the same files there and all the sms etc it just does a soft reset when i do that
no, yes, yes
have you selected yes for the “Clean Registry Hive” and “Format Storage” options? it's done by using the camera and record button on the left side of your ba.
cstoica said:
have you selected yes for the “Clean Registry Hive” and “Format Storage” options? it's done by using the camera and record button on the left side of your ba.
Click to expand...
Click to collapse
i put the
nive on NO
Format Storange on yes
Clean Reg on yes
then i did the following
Anti-Imperialism from the Metropole
Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner).
Click to expand...
Click to collapse
you dont hard reset after you have selected the Hive to no and the format storage to yes , you press the action button(in the middle of the direction pad) that is why you still have the same files when it restarts you are not formatting anything, you are just resetting the device
ok ok
so let me get this right
1) Camera + Record + Reset
2) Enable KITL NO
Clean Reg Hive YES
Format Storage YES
3) the action button on the middle of the direction pad
(the action button in the middle of the direction is not working but the button which is is the Message Button)
before i do this how do i back up my text messages and restore them?
My 4 button above green button and red button (including message button) isn't working and i need to make a hard reset...
thank you
pVilaça said:
My 4 button above green button and red button (including message button) isn't working and i need to make a hard reset...
thank you
Click to expand...
Click to collapse
same with .... any idea for this problem plz??
----------

[Q] My Wildfire Going Crazy

Hello guys
I have wildfire with android 2.2.1, these day touch for my phone is not working properly.
* it automatically dials random number in call history
* Touch turns so hard to access (some time)
* Touch wont work at few areas on screen.
* Touch not at all working some times, (if i off the screen and turn on the screen back, then it MAY works but only some times) as a result I cant disconnect any on going calls or incoming calls
* Home Button forgot to do its work some times, if I press HOME button it will work as a selection key.
* Notification screen struck up at the middle or somewhere, not able to drag down the lock screen up or down.
uffff... there are some other issues with my WF.
I have did a factory restore and formated my Memory Card. but it still continues.
can someone let me know what can I do before taking it servicing center.
Have you tried wiping it from the bootloader?
I dont know how to do it...
can u let me know ?
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
nejc121 said:
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
Click to expand...
Click to collapse
Yes, those instructions are correct, I have did it. Its better as of now. I'll monitor it for more hours (24+) and report back the status for your tweak.
Thanks nejc212
nejc121 said:
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
Click to expand...
Click to collapse
To get into hboot, switch off the device and hold the vol down + power button.
There u can clear storage (=factory reset).
-----------------------------------------------------------------------------------------------------------------------------------------------------------
To OP:
Do one thing. Remove the memory card, and format the phone. Donot insert the memory card or connect to any internet networks. Use the phone for a while like this. If u feel it is OK, then ur phone is OK.

How to Factory Reset Motorolla XT912

Forget your gmail password / screen lock or you locked out? No Problem!
This option will wipe all your data! S be warned!
If you are in our area, we can recover your lost data!
I am not responsible for anything if you brick/ break/ or through your cell away! Ok? (won't happen if you follow my directions.
OK. Here are the easy steps!
1) Turn Your Phone Off
2) Hold Volume +UP And -Down
3) While holding those 2 volume buttons, Hit the Power Button. Then release all.
4) You will see a black screen with a RECOVERY option (#2)
5) Hit RECOVERY with the power button
6) You will now see a triangle with an image on it
7) Hold the up / down volume and tap the power button. then release all.
8) see the wipe / reset option now? Hit That option!
9) Now Wipe Cache
10) Reboot
11) Tadaaaahhhh!
12 Extra) Here is a cool trick...
13) On the android setup on boot tap the upper left, upper right, lower right, and lower left corners without touching the setup buttons. Check that out!
Enjoy this cool device! (Another successful repair at Legacy Tech Computer Repair. Time for Root! I'll post that method later!)
UPDATE! Just found out this method won't wipe your internal storage for the picks / music etc! EVEN BETTER!
Correction in Process
Hi , thanks your post helped me get my phone unlocked but however it needs some corrections ( atleast I feel so )
Have highlighted them in BOLD BLUE
rgsgroup2005 said:
1) Turn Your Phone Off
2) Hold Volume +UP And -Down
3) While holding those 2 volume buttons, Hit the Power Button. Hold onto them till the Menu comes up
4) You will see a black screen with a RECOVERY option (#2)
5) Hit RECOVERY with the Volume Up Button ( to Select as written in the Second Row from top in menu)
6) You will now see a triangle with an image on it
7) Hold the down Volume Down / Power and tap the Volume Up Button. then release all. ( Basic Logic derived from the orignal post was Select button is VOLUME UP thus - whereever Power Button is doing the selection in above post use Volume Up Button )
8) see the wipe / reset option now? Hit That option!
9) Now Wipe Cache
10) Reboot
11) Tadaaaahhhh!
Click to expand...
Click to collapse
P.S:: Additional Info I performed this on JellyBean variant
jskandhari said:
hi , thanks your post helped me get my phone unlocked but however it needs some corrections ( atleast i feel so )
have highlighted them in bold blue
p.s:: Additional info i performed this on jellybean variant
Click to expand...
Click to collapse
worked for me!!!
thanks saved my lot of time
Buttons not working
WHEN I PERFORMED THIS THE RECOVERY MENU APPEARS BUT DOESN'T SHOW ANY RESPONSE WHEN I PRESSES THE VOLUME DOWN BUTTON TO SELECT RECOVERY!!!
WHAT SHOULD I DO ??????????
Mohsin
jskandhari said:
Hi , thanks your post helped me get my phone unlocked but however it needs some corrections ( atleast I feel so )
Have highlighted them in BOLD BLUE
P.S:: Additional Info I performed this on JellyBean variant
Click to expand...
Click to collapse
Thanks a lot dear
:good:
carry on

need help with this ROM Gigajoule(return)

hey ijust downloaded this rom from Gigajoule(return)
i was wondering how i could enable homebutton awake
and also you know when you hold onto the home button you can go to the task manager and remove all? mines isnt there anymore.
can anyone help me get those 2 ? thanks
also whenever i recieve a text message, whenever im on my lockscreen it doesnt show that small bubble to slide to reply? how can i get that back also?
Both those answers are in the thread. Search Home Wake/Awake.
sojuboi69 said:
hey ijust downloaded this rom from Gigajoule(return)
i was wondering how i could enable homebutton awake
and also you know when you hold onto the home button you can go to the task manager and remove all? mines isnt there anymore.
can anyone help me get those 2 ? thanks
Click to expand...
Click to collapse
via root explorer
system/usr/keylayout
scroll down to: sec_keys.kl
locate line: key 172 HOME
after home put "wake"
Crisisx1 said:
via root explorer
system/usr/keylayout
scroll down to: sec_keys.kl
locate line: key 172 HOME
after home put "wake"
Click to expand...
Click to collapse
it kept saying error occured when trying to save the file. it will not be saved

Recovery Mode on Eonon GA6121

I have this stereo with android but by mistake i change the screen resolution and now i cant use it because the buttons are in diferent possitions
I read the forum and the possible solution its make a factory reset in by the recovery mode but when i press rest and power button it just send me to a screen with the text "update start" and scan my sd card...so i belive im doing something wrong.
There is another way to enter in recovery mode on this model?
Thanks.
Zitual said:
I have this stereo with android but by mistake i change the screen resolution and now i cant use it because the buttons are in diferent possitions
I read the forum and the possible solution its make a factory reset in by the recovery mode but when i press rest and power button it just send me to a screen with the text "update start" and scan my sd card...so i belive im doing something wrong.
There is another way to enter in recovery mode on this model?
Thanks.
Click to expand...
Click to collapse
Me tool, help!
if you modify system files you need update system from (update.img) the reset (factory/data) Does not change anything ,to go to recovery on the main screen (launcher) hold long press for power button about 9 second and press the button again

Categories

Resources