Develop Bugs

What am I doing wrong? Loading baconbits.

So I perm rooted and it says S-Off in fastboot and I have superuser access I believe.
I got rom manager and downloaded clockwork through rm. I try to install rom from SD card, select the baconbits rom, it asks to backup or clear, I have tried both.
The phone boots to htc screen, then shows a black screen with a phone and a red symbol over it. I waited 20 minutes on that screen and nothing happened.
I was able to push vol up and power to get a console but I can't load anything there. It will reboot just fine after that but I have no changes and still cannot overclock.
Does this have something to do with the user keys or whatever?
Thanks in advance for reading this and any help that gets offered. I hate to have my first post on a forum being a "help me" post.
Sent from my T-Mobile G2 using XDA App

Go into Rom Manager and try to flash Clockwork recovery again. This has happened to a lot of people... Flash it a second time, and it should be good.
Dan

Did you download the "g2-recovery-test-keys.img" from the 3rd post quoted below?
Place that file in the C:/android/tools or whatever your cd line is, which should in the tools folder. Now go the 6th step. FYI the sixth step I tried from fastboot and recovery, none worked until I reinstalled the drivers my computer kept prompting me for and immedatly got the OKAY's from the 7th step.
Edit: The code "fastboot flash recovery g2-recovery-test-keys.img" should be copied pasted onto your cmd.
ciwrl said:
Noob walkthrough:
1.Setup Android SDK and install drivers/udev rules as needed
2. S-Off your g2 http://goo.gl/Sc134
4. Copy vision-baconbits-0.3.zip to your sdcard, rename it update.zip (you can do this via adb using: adb push vision-baconbits-0.3.zip /sdcard/update.zip)
5. Reboot to fastboot mode (adb reboot bootloader)
6. Flash the recovery http://n0rp.chemlab.org/android/vision/g2-recovery-test-keys.img : fastboot flash recovery g2-recovery-test-keys.img (if you get 'waiting for device' your phone either isnt in fastboot mode, or you will need to fix your sdk drivers)
7. You should get two 'OKAY's once recovery flash is complete
8. Press the power button once; then the vol down button to highlight 'recovery'; then the power button again to select the 'recovery' option
9. The phone will reboot to recovery
10. Press volume up+power to show the recovery menu
11. Select the 'Apply:update.zip' option, using volume keys to navigate, and power button as [enter]
12. Once the zip applies, reboot
If you get signature verification errors on the zip, it means your fastboot flash of recovery failed to apply, redo it
Click to expand...
Click to collapse

Bingo, That worked. Glad it was that simple. I actually had to flash clockwork a third time to get it to go all the way.
Sent from my T-Mobile G2 using XDA App

[Q] [PROBLEM] htc desire recovery - volume keys not working

Hi!
I recently rooted my Desire with unrevoked 3 and I installed the ReflexS rom. Everything worked perfectly!
I was curious for Cyanogenmod and I downloaded version 7.0.3 directly through Rom Manager. When the download was completed it suggested to install which I agreed. I think clear Dalvik cache was marked, but clear data cache was not. I agreed... maybe my first mistake.
After this Cyanogenmod was installed, but my Desire stayed on the boot screen (sakteboarding android with running arrow) for over 30min so I took out the battery. I restarted and it goes well until the android setup screen "tap the android to begin". I can tap and it gets glowing, but it does not continue! I can not go any further than this. The only thing I can do is choose a language or shutdown.
To overcome this issue I thought of recovering/reinstalling my previous ROM. I also have a Titanium backup.
Now here's the problem: when start up into recovery, my volume buttons won't work so I can not enter into the recovery menu.
What should I do?
I'm getting desperate, because my phone is down at the moment!
Thanks for your help!

you mean volume buttons dont work in recovery or in bootloader ?
in recovery you can navigate using trackpad, in bootloader you must wait around 10-15 seconds until you can use volume buttons to navigate.
and yes it was a BIG mistake not to make a wipe before the flashing of cyanogenmod....
you should have done a full wipe

Ok will firstly, go to the Cyanogenmod stable topic to read how to install out. Secondly, avoid rom manager. Thirdly, to boot into recovery, boot your phone like normal and plug your phone into your pc. After about 20 second the usb will kick in. This is where you use the adb reboot recovery command in command prompt or terminal. Enjoy.
Swyped...

Meaple said:
... After about 20 second the usb will kick in. This is where you use the adb reboot recovery command in command prompt or terminal. Enjoy.
Swyped...
Click to expand...
Click to collapse
can you explain for noobs how to do it? PLEASE!!!
thank you anyway

boot into fastbood mode (hold BACK and POWER).
unzip the attached file into your C:\
open command prompt (accessories)
type
Code:
cd\
fastboot oem gencheckpt
your phone will boot into recovery.

Bortak and Meaple ..... THANK YOU!!!

Mine says waiting for device and nothing happens after I type in the command

dark_polok said:
Mine says waiting for device and nothing happens after I type in the command
Click to expand...
Click to collapse
Do you have the drivers installed? You van try installing and then uninstall HTC Sync to get the drivers.
Sent from my HTC Original Desire with Android 4.0.3 ICS using Tapatalk

I am pretty sure you did not install ADB (correctly). Check my sig how to do.

After Ruu ROM installing, can`t gen in RECOVERY mode
Someone can help me..
I Install RUU ROM from Windows, and then i can`t go to recovery mode in fastboot.. how i can it solved????
I have - revolutionary s-off
Please.. HELP ME!!!

Check bortak's troubleshooting guide.
Sent from my HTC Desire using Tapatalk

bortak said:
boot into fastbood mode (hold BACK and POWER).
unzip the attached file into your C:\
open command prompt (accessories)
type
Code:
cd\
fastboot oem gencheckpt
your phone will boot into recovery.
Click to expand...
Click to collapse
What if your phone doesn't boot into recovery in this case and you get an error that says "FAILED (Status Malformed (1 bytes))"?

dzeksis said:
Someone can help me..
I Install RUU ROM from Windows, and then i can`t go to recovery mode in fastboot.. how i can it solved????
I have - revolutionary s-off
Please.. HELP ME!!!
Click to expand...
Click to collapse
You can alwys get into recovery through the adb shell.

Hi.
I know this tread is old but the issue is relevant because this is still a persistant problem.First of all thanks for the tip and second i have great,great news !!! you dont even have to deassemble the phone to put the up down button to work.Just insert the alcool UNDER the volume button with a seringe with a needle and click the button for a minute or two...wait until the alcool evaporates and VOILÁ !! problem fixem !! Not need todeassemble or using adb.Just do this and you will be fine.

[Q] Incredible won't boot into Clockwork

Alright, I have been searching around for my problem and I have found no such luck. I am running Evervolv ICS ROM Preview 8 and I noticed they released Preview 9. So I decided to upgrade of course but I came across a snag. My phone just boot's into the stock recovery and not into Clockwork. I have found a similar problem in another forum but I am unable to post the link do the rules of this forum.
The problem being that I cannot turn off FASTBOOT, I have no selection to do so in my phones settings.
Any help at all would be wonderful.

Hadonka402 said:
Alright, I have been searching around for my problem and I have found no such luck. I am running Evervolv ICS ROM Preview 8 and I noticed they released Preview 9. So I decided to upgrade of course but I came across a snag. My phone just boot's into the stock recovery and not into Clockwork. I have found a similar problem in another forum but I am unable to post the link do the rules of this forum.
The problem being that I cannot turn off FASTBOOT, I have no selection to do so in my phones settings.
Any help at all would be wonderful.
Click to expand...
Click to collapse
Are you s-off? If so flash cwm recovery thru hboot as a PB31IMG.zip http://dinc.does-it.net/Recoveries/CWM_5.0.2.0/PB31IMG.zip
If you can boot into the stock recovery then fastboot is not the issue. If fast boot is enabled holding vol down and power just boots the phone, you will not enter any recovery. The only way to enter recovery with fastboot enabled is to pull the battery truly powering off the phone, fastboot does not power of but hibernates for faster boot.

cmlusco said:
Are you s-off? If so flash cwm recovery thru hboot as a PB31IMG.zip
If you can boot into the stock recovery then fastboot is not the issue. If fast boot is enabled holding vol down and power just boots the phone, you will not enter any recovery. The only way to enter recovery with fastboot enabled is to pull the battery truly powering off the phone, fastboot does not power of but hibernates for faster boot.
Click to expand...
Click to collapse
Yes I am S-OFF, how do I flash through hboot? This does not fully answer my question of why I am unable to boot into Clockwork and how to fix this issue.

Hadonka402 said:
Yes I am S-OFF, how do I flash through hboot? This does not fully answer my question of why I am unable to boot into Clockwork and how to fix this issue.
Click to expand...
Click to collapse
Well if you are getting the stock recovery then i assume cwm recovery is not installed. Flashing the file above will install it.
To do so download the file and place it on your sdcard in no folders.
Power off the phone and pull the battery, then reinsert.
Hold vol down and power buttond till a white screen pops up (hboot). Wait a couple secs and hboot will find the file, parse it, and then prompt to press vol up to update. When its donr it will prompt to press vol up to reboot or vol down not to. Press vol down and then scroll to and select recovery. You should now be where you want to be.

cmlusco said:
Well if you are getting the stock recovery then i assume cwm recovery is not installed. Flashing the file above will install it.
To do so download the file and place it on your sdcard in no folders.
Power off the phone and pull the battery, then reinsert.
Hold vol down and power buttond till a white screen pops up (hboot). Wait a couple secs and hboot will find the file, parse it, and then prompt to press vol up to update. When its donr it will prompt to press vol up to reboot or vol down not to. Press vol down and then scroll to and select recovery. You should now be where you want to be.
Click to expand...
Click to collapse
I'm sorry I was not clear before, forgive me. Yes Clockwork is installed, I have reflashed it with the current version and older versions to attempt to fix the problem. I tried another recovery as well (One that I cannot recall at the moment) and I still boot into the stock recovery. My main problem is that I cannot boot into Clockwork. I'm sorry again for not being specific before.

Hadonka402 said:
I'm sorry I was not clear before, forgive me. Yes Clockwork is installed, I have reflashed it with the current version and older versions to attempt to fix the problem. I tried another recovery as well (One that I cannot recall at the moment) and I still boot into the stock recovery. My main problem is that I cannot boot into Clockwork. I'm sorry again for not being specific before.
Click to expand...
Click to collapse
Have you tried using rom manager to install cwm, and using the erase recovery before flashing option in its preferences?
What hboot version are you on?

cmlusco said:
Have you tried using rom manager to install cwm, and using the erase recovery before flashing option in its preferences?
What hboot version are you on?
Click to expand...
Click to collapse
Yes I have done that and still no luck. I am using, HBOOT-0.92.0000

Hadonka402 said:
Yes I have done that and still no luck. I am using, HBOOT-0.92.0000
Click to expand...
Click to collapse
Hmmm very strange. Do you have a pc with adb and fastboot setup on it?

cmlusco said:
Hmmm very strange. Do you have a pc with adb and fastboot setup on it?
Click to expand...
Click to collapse
No I do not, should I go ahead and get that setup? Before I forget thank you for being patient and helpful this far, I appreciate your help so far.

Download this http://dinc.does-it.net/ADB/ADB-Fastboot-USB-Drivers_v4_(x86)(x64).zip, and extract it to C:\. You should now have an ADB folder on the C:\ drive (C:\ADB), which contains adb.exe and fastboot.exe. Then follow this guide to setup the drivers http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Once that is setup and working download this zip file ( http://dinc.does-it.net/Guide_Root_New_Hboot/flash_mtd_recovery.zip ), unzip it, and place the 2 files on your sdcard in no folders.
Make sure usb debuging is checked on in menu - settings - applications - development
Power off the phone pull the battery and reinsert. Plug the phone in to the pc and hold vol down and power till hboot comes up. Select fastboot, it should say in red near the top fastboot usb. Then type the folowing in a cmd prompt:
fastboot erase recovery
Once complete reboot the phone.
Set the phone to charge only.
Open a command prompt on your PC and navigate to the same folder as your fastboot.exe file, (example type: cd C:\ADB ).
Type the following into the command prompt pressing the enter key at the end of each line:
adb shell
(You should now get a pound sign #)
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery.img
Then try to see if you can access cwm recovery.

cmlusco said:
Hmmm very strange. Do you have a pc with adb and fastboot setup on it?
Click to expand...
Click to collapse
cmlusco said:
Download this http://dinc.does-it.net/ADB/ADB-Fastboot-USB-Drivers_v4_(x86)(x64).zip, and extract it to C:\. You should now have an ADB folder on the C:\ drive (C:\ADB), which contains adb.exe and fastboot.exe. Then follow this guide to setup the drivers http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Once that is setup and working download this zip file ( http://dinc.does-it.net/Guide_Root_New_Hboot/flash_mtd_recovery.zip ), unzip it, and place the 2 files on your sdcard in no folders.
Power off the phone pull the battery and reinsert. Plug the phone in to the pc and hold vol down and power till hboot comes up. Select fastboot if not already selectef for you. It should say in red near the top fastboot usb plug. Then type the folowing in a cmd prompt:
fastboot erase recovery
Once complete reboot the phone.
Set the phone to charge only, and make sure usb debuging is checked on in menu - settings - applications - development.
Open a command prompt on your PC and navigate to the same folder as your fastboot.exe file, (example type: cd C:\ADB ).
Type the following into the command prompt pressing the enter key at the end of each line:
adb shell
(You should now get a pound sign #)
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image recovery /sdcard/recovery.img
Then try to see if you can access cwm recovery.
Click to expand...
Click to collapse
I got an error called Segmentation Fault.

Hadonka402 said:
I got an error called Segmentation Fault.
Click to expand...
Click to collapse
Sounds like the recovery partition may be corrupt, nothing will write to it. Well if i were you i would do an ruu and see if that fixes it. Not much else you can do i dont think. Hopefully the ruu will fix it and allow you to flash cwm.

How do I go about doing ruu?

Hadonka402 said:
How do I go about doing ruu?
Click to expand...
Click to collapse
Download this ruu http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip, and here is a good write up on how to flash it. http://pvillecomp.com/?page_id=79. Its the same way you flashed the cwm file earlier in post 2, thru hboot as a PB31IMG.zip

cmlusco said:
Download this ruu http://dinc.does-it.net/Stock_Images/4.06.605.3/PB31IMG.zip, and here is a good write up on how to flash it. http://pvillecomp.com/?page_id=79. Its the same way you flashed the cwm file earlier in post 2, thru hboot as a PB31IMG.zip
Click to expand...
Click to collapse
Note that doing an ruu will wipe yout phone and you will ne back to stock. If after doing so you still cant get a recovery to flash, you will be stuck on stock.

cannot reset

Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.

ulise73 said:
Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.
Click to expand...
Click to collapse
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.

jimbo77 said:
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.
Click to expand...
Click to collapse
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!

ulise73 said:
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!
Click to expand...
Click to collapse
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...

jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
hi,
i have the same problem, i tried your solution, but it didn't work
the huawei logo is on all the time, when i reset by pressing the on/off button several seconds, it start, en keeps restart. till the logo upears, en than it stops. not reconized trough usb, and not to turn off...
sorry for my bad english

Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.

ZuperStyler said:
Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.
Click to expand...
Click to collapse
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.

cowe said:
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.
Click to expand...
Click to collapse
Install the drivers, or open HiSuite, that should do it.

I tried to do that. cmd but it says:
adb server did not ack
unkown host service.

jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have

iscaac said:
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have
Click to expand...
Click to collapse
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app

husen4u said:
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
is there something im doing wrong here HELP PLEASE

iscaac said:
is there something im doing wrong here HELP PLEASE
Click to expand...
Click to collapse
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...

jimbo77 said:
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...
Click to expand...
Click to collapse
I still get same error message when I try to flash kernel and recovery

Stuck with nothing but mi recovery installed

I recently reverted back to miui recovery from twrp but the mistake i made was that i also removed rom while doind it and now i am stuck mith nothing but just mi recovery installed on my phone. I intent to flash back miui into my phone and so i need some help, please.

Dishagra said:
I recently reverted back to miui recovery from twrp but the mistake i made was that i also removed rom while doind it and now i am stuck mith nothing but just mi recovery installed on my phone. I intent to flash back miui into my phone and so i need some help, please.
Click to expand...
Click to collapse
Try sideloading via ADB

RajGopi said:
Try sideloading via ADB
Click to expand...
Click to collapse
well can you help me do that , i'm not a pro at these things.

Dishagra said:
well can you help me do that , i'm not a pro at these things.
Click to expand...
Click to collapse
Download n install ADB n fastboot drivers on your windows PC
After installing restart pc once n follow below procedure
Download .img file of TWRP recovery
Flash it in fastboot mode
Place the .img file in C:\users:\xxxx folder
Power off redmi n start it in fastboot mode
Press power+volume down button simultaneously n leave buttons when you see Mi logo
Connect to PC
Now open command prompt n run this following command
fastboot flash recovery <filename>.img
Now pull out the battery n start in recovery mode
Power+volume up simultaneously till you see Mi logo n release buttons
If it is TWRP then you are good to go
Place the rom in users folder
Goto advanced section in TWRP n there you will find option to ADB
Select it n connect phone to PC
Open command prompt n run this command
adb sideload <filename>.zip
It takes a while n if that succeeds then you will be fine
Press thanks if helped
---------- Post added at 07:36 PM ---------- Previous post was at 07:35 PM ----------
Dishagra said:
well can you help me do that , i'm not a pro at these things.
Click to expand...
Click to collapse
Download n install ADB n fastboot drivers on your windows PC
After installing restart pc once n follow below procedure
Download .img file of TWRP recovery
Flash it in fastboot mode
Place the .img file in C:\users:\xxxx folder
Power off redmi n start it in fastboot mode
Press power+volume down button simultaneously n leave buttons when you see Mi logo
Connect to PC
Now open command prompt n run this following command
fastboot flash recovery <filename>.img
Now pull out the battery n start in recovery mode
Power+volume up simultaneously till you see Mi logo n release buttons
If it is TWRP then you are good to go
Place the rom in users folder
Goto advanced section in TWRP n there you will find option to ADB
Select it n connect phone to PC
Open command prompt n run this command
adb sideload <filename>.zip
File name is name of rom
It takes a while n if that succeeds then you will be fine
Press thanks if helped