Is there a way to make the PS3 controller auto go to sleep after a period of inactivity like the OUYA controller does? I much prefer the PS3 controller to the OUYA, but it's always on and connected unless I turn off the OUYA. Stays on during movies ect.
frigidazzi said:
Is there a way to make the PS3 controller auto go to sleep after a period of inactivity like the OUYA controller does? I much prefer the PS3 controller to the OUYA, but it's always on and connected unless I turn off the OUYA. Stays on during movies ect.
Click to expand...
Click to collapse
+1
Related
So im curious, since the controller dosent really work smoothly with most side loaded games from the plays store. what is everyone using to play them (ex minecraft)? Are you using a app to smooth out the bumps or have you used a ps3 or wii controller and one of the many apps for that? i havent really found a good way yet what about you all?:fingers-crossed:
Onetearfalls said:
So im curious, since the controller dosent really work smoothly with most side loaded games from the plays store. what is everyone using to play them (ex minecraft)? Are you using a app to smooth out the bumps or have you used a ps3 or wii controller and one of the many apps for that? i havent really found a good way yet what about you all?:fingers-crossed:
Click to expand...
Click to collapse
I am mostly removing apps which are not working good with controller but would like to know how to get them going.
but there are quite a few application which are working too good with the controller.
Well considering Ouya goes retail at the end of this month they really need to start working on the controller issues. And clean out a lot of those games, half of them don't work and the ones that do really really need work on their controller. Also a really nice feature would be if I could hold down the Ouya button to have the option to turn off the console like Xbox and Ps3, I hate getting up to turn it off.
How does ones get a ps3 controller to work?
Sent from my Amazon Kindle Fire using xda app-developers app
Ozz465 said:
How does ones get a ps3 controller to work?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
you can connect the ps3 via blue tooth and use a ps3 controller app like (https://play.google.com/store/apps/...kaW9zLnNpeGF4aXNjb21wYXRpYmlsaXR5Y2hlY2tlciJd)
and that should work havn't tried it yet though
You would only need that app if the game doesn't natively support it.
If the developer has done a good job, then the PS3 and Xbox 360 controllers should work just fine.
For example, Bomb Squad natively "just works" with the standard Ouya controller, wireless and wired Xbox 360 controllers, and PS3 as well.
This weekend we played 6 player Bomb Squad (you can have up to EIGHT players on one TV!!!!!!!!!!!!!) with 2 Ouya controllers via BlueTooth, 2 off-brand USB wired Xbox 360 controllers, and 2 official MS wireless Xbox 360 controllers (connected via the Xbox 360 USB wireless adapter).
BTW, the adapter I am using for Xbox 360 wireless controllers is http://www.ebay.com/itm/370777929957?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
was like $11 and works great, also works on my PC.
Onetearfalls said:
you can connect the ps3 via blue tooth and use a ps3 controller app like (https://play.google.com/store/apps/...kaW9zLnNpeGF4aXNjb21wYXRpYmlsaXR5Y2hlY2tlciJd)
and that should work havn't tried it yet though
Click to expand...
Click to collapse
Nope, you just plug in the ps3 controller via usb and push the reset button on the back and/or the ps3 button. Bluetooth will get messed up and refuse to turn on. Shut down the Ouya by holding down the power button, unplug the controller, start it back up and all your Ouya and PS3 controllers will connect just fine (if it doesn't work right away, go into the menu to pair controllers and just hold down the ps3 button instead of the ouya button and it will connect). I use 2 Ouya controllers and 2 PS3 controllers.
First of all, this is NOT my How To. It belongs to James Andrew Coote and the original Post about this can be found here: How to Pair a PS3 Controller
Maybe the Mods will find this Post useful for the users and will stick it, or it will be deleted :/
I thought that this is a very common question and i didn't see a "sticky-post" about this.
Here we go:
1. Turn your OUYA on and make sure you have at least one OUYA controller paired
2. Plug your PS3 Controller into your OUYA using a mini-USB to standard USB cable
3. Hold down the home button on your PS3 controller. This should take you back to the OUYA home screen. Make sure the PS3 controller is working by using it to navigate the menus. You will also note that the OUYA controller has been disconnected and won't pair. This is because plugging in the PS3 controller on USB turns off bluetooth.
4. To solve this, first completely power down your OUYA. You can do this by either holding down the power button on the top of the console for 5 seconds (recommended) or unplugging the power cable.
5. Unplug the PS3 controller from the mini-USB wire, and unplug the same wire from the OUYA.
6. Turn the OUYA back on. When it finishes booting up, you should see the usual pairing screen appear
7. Hold down the home button on the PS3 controller as you would with a normal OUYA controller to pair it. Other OUYA controllers should now also pair
Click to expand...
Click to collapse
And please do not forget:
It should be noted that not all OUYA games support the PS3 controller. However, it should allow you at a minimum to navigate the OUYA menu
Click to expand...
Click to collapse
Thanks !
Going to try this tonight, great post ! +1
any way to do this wireless?
is it possible to get it to connect with out a micro usb cable? also would it be possible to use a similar method to get a xbox controller to work?
razgriz1234 said:
is it possible to get it to connect with out a micro usb cable? also would it be possible to use a similar method to get a xbox controller to work?
Click to expand...
Click to collapse
Xbox controllers are not Bluetooth. They won't work without the USB wireless device.
I've tested this and it requires the cable at first to grab its MAC address and setup the wireless pairing. The controller only connects with to a device with a specific MAC address. Even on Android, you have to connect it up to your PC first before it will pair.
This is pretty easy though. Connect with USB, reboot, and pair.
Sent from my Nexus 7 using XDA Premium HD app
Anyone else have there ps3 controller red lights keep flashing and not sync with the ouya at all?
Sent from my Amazon Kindle Fire using xda app-developers app
Just tried it and it worked thanks
My red lights always flash, even after paired and when using. That is normal. Make sure you hook it up to USB first, make sure you can control it using Wired, then pull the power from the Ouya and remove the USB. When it boots back up, at the Pairing screen, you can pair the PS3 wirelessly.
Then it works just like the Ouya controller. You can jump in any time.
Anyway to turn off the PS3 controller once it's connected without manually turning off the OUYA? That seems to be the only way other than going into BT settings and disconnecting it.
Is it really possible to connect ps4 controller to amazon fire tv..I've seen video on YouTube someone did that by pressing share and home bottoms same time then its worked..i tried that along with everything and it always failed to connect..it's keep saying my controller is not in range while I'm only 4 to 5 feet away..can someone help on how to please
would be appropriate
Theres supposedly differnt revisions of the DS4 that behave slightly differnt then others ... its been said launch controllers wont connect .. what revision that is
The controller I have is practically useless the input lag increases the more i use it *distance doesnt matter* and it will get unusable very quick with over a minute lag.
I suggest getting a differnt controller.
.
Thanks for reply
I use my PS4 controller with my Amazon Fire TV all the time,it's the best controller for Amazon Fire TV IMO.never had any issues.
Pairing it very easy,but can be a little confusing as it's a 2 step task.
First you need to go to controller pairing setting on AFT and search for new controller,meanwhile you must turn of the PS4 controller and hold share and power button at the same time,you will notice the PS4 controller will start flashing.
here is the tricky part,on your TV you will see a unknown controller (or something similar) becomes available,now you must click on that and press Share+power again on the PS4.
After that it will be paired and you will get a message confirming that.
Alsomake sure you unplug the PS4 console itself if you have one,because otherwise the controller will turn the PS4 on and conflics with pairing process with AFT.
I use a seperate PS4 controller with AFT.
I am currently using the Sixaxis app with sony ps3 dualshock controller to control my fire tv - it works great - has support for home button, mouse mode and can be customized very well.
My only problem is that, the controller will not charge no matter what - from the fire tv directly, or when connected to pc, or from a wall charger.
The only way to charge it is to reset it (via the small pinhole in the back), or connect it to ps3 - this will make it lose the pairing with the fire tv and it will start charging again. I will have to set the bluetooth address again via the SixaxisPairTool from PC to get it to pair with the fire tv again.
My first question is - does the charging work for you after you have used the SixaxisPairTool from PC?
I also have a gamestop red samurai v2 controller. This pairs and works with the fire tv without any special app. However, misses mouse control.
I went through the threads here and understand that by creating a custom keyboard.kl file we can get the behavior we want for that controller. Can that idea be used to control mouse behavior as well? Any pointers would be welcome.
Thanks.
deepasadish said:
I am currently using the Sixaxis app with sony ps3 dualshock controller to control my fire tv - it works great - has support for home button, mouse mode and can be customized very well.
My only problem is that, the controller will not charge no matter what - from the fire tv directly, or when connected to pc, or from a wall charger.
The only way to charge it is to reset it (via the small pinhole in the back), or connect it to ps3 - this will make it lose the pairing with the fire tv and it will start charging again. I will have to set the bluetooth address again via the SixaxisPairTool from PC to get it to pair with the fire tv again.
My first question is - does the charging work for you after you have used the SixaxisPairTool from PC?
I also have a gamestop red samurai v2 controller. This pairs and works with the fire tv without any special app. However, misses mouse control.
I went through the threads here and understand that by creating a custom keyboard.kl file we can get the behavior we want for that controller. Can that idea be used to control mouse behavior as well? Any pointers would be welcome.
Thanks.
Click to expand...
Click to collapse
hah, so you're here as well... I also have/had ps3 controller paired with sixaxis, but I haven't used it for a while and ATM does need to be charged with actual PS3.
So, to answer your question PS3 controller did work(charged via phone charger and xbox one usb) for me after it was paired with sixaxis for long time until eventually I stopped using it and then ran out of juice. Now it needs PS3 to charge again (maybe once), before I can reuse wall charger. Problem is, I don't have PS3 on me.
yep. the ps3 controller with sixaxis app works so beautifully with both regular apps and side loaded apps (that require mouse), it is a shame that it cannot be charged.
i have it setup such that the right analog is mouse (always in mouse mode), left analog is rew/ff/prev/next, d-pad is d-pad, L1 and R1 are left and right mouse, etc.
the problem is the sixaxis tool works only with sony ps3 controller. is there any other app like this that will do the same with any controller? thanks.
deepasadish said:
yep. the ps3 controller with sixaxis app works so beautifully with both regular apps and side loaded apps (that require mouse), it is a shame that it cannot be charged.
i have it setup such that the right analog is mouse (always in mouse mode), left analog is rew/ff/prev/next, d-pad is d-pad, L1 and R1 are left and right mouse, etc.
the problem is the sixaxis tool works only with sony ps3 controller. is there any other app like this that will do the same with any controller? thanks.
Click to expand...
Click to collapse
well there are xbox 360 and xbox one controllers "how to" here, but I haven't tried them since both somewhat requires usb cable or dongle because they are not bluetooth based. and just repeating myself here, but ps3 controller does charge using other options and NOT ps3 only. BUT if it dies, then PS3 is required to recharge because you'll have to reset it.
ok. i am not sure why the charging does not work for me though. it won't even charge from PC once the SixAxisPairTool changes the mac address.
i saw the tincore app and i am planning to try it today with my gamestop controller.
How did you configure the sixaxis controller app? Whenever I try to connect the controller it never finds it even if i have the correct bluetooth address paired.
SUCCESS with tincore app. configuration is a bit difficult due to access via the fire tv remote and due to some menu items not showing up fully. however, once configured, the gamestop red samurai v2 remote works flawlessly - for necessary buttons as well as mouse.
i cannot get it to auto apply on restart and will investigate that later. for now, i am happy . thanks.
rfarina51 said:
How did you configure the sixaxis controller app? Whenever I try to connect the controller it never finds it even if i have the correct bluetooth address paired.
Click to expand...
Click to collapse
not sure what you are missing, but you can try this:
1. start the sixaxis server in fire tv and get the bluetooth address from bottom left
2. use the SixaxisPairTool in PC to set that address on the controller (for good measure you can reset the controller first by the pinhole in the back)
3. now pressing the glass PS button on controller should pair it
Hi, how do I access controller settings? I paired it up via bluetooth, but when I don't know where to go to configure it for my games. The controller setting button is dulled out in the game space mode.