First of all, this is NOT my How To. It belongs to James Andrew Coote and the original Post about this can be found here: How to Pair a PS3 Controller
Maybe the Mods will find this Post useful for the users and will stick it, or it will be deleted :/
I thought that this is a very common question and i didn't see a "sticky-post" about this.
Here we go:
1. Turn your OUYA on and make sure you have at least one OUYA controller paired
2. Plug your PS3 Controller into your OUYA using a mini-USB to standard USB cable
3. Hold down the home button on your PS3 controller. This should take you back to the OUYA home screen. Make sure the PS3 controller is working by using it to navigate the menus. You will also note that the OUYA controller has been disconnected and won't pair. This is because plugging in the PS3 controller on USB turns off bluetooth.
4. To solve this, first completely power down your OUYA. You can do this by either holding down the power button on the top of the console for 5 seconds (recommended) or unplugging the power cable.
5. Unplug the PS3 controller from the mini-USB wire, and unplug the same wire from the OUYA.
6. Turn the OUYA back on. When it finishes booting up, you should see the usual pairing screen appear
7. Hold down the home button on the PS3 controller as you would with a normal OUYA controller to pair it. Other OUYA controllers should now also pair
Click to expand...
Click to collapse
And please do not forget:
It should be noted that not all OUYA games support the PS3 controller. However, it should allow you at a minimum to navigate the OUYA menu
Click to expand...
Click to collapse
Thanks !
Going to try this tonight, great post ! +1
any way to do this wireless?
is it possible to get it to connect with out a micro usb cable? also would it be possible to use a similar method to get a xbox controller to work?
razgriz1234 said:
is it possible to get it to connect with out a micro usb cable? also would it be possible to use a similar method to get a xbox controller to work?
Click to expand...
Click to collapse
Xbox controllers are not Bluetooth. They won't work without the USB wireless device.
I've tested this and it requires the cable at first to grab its MAC address and setup the wireless pairing. The controller only connects with to a device with a specific MAC address. Even on Android, you have to connect it up to your PC first before it will pair.
This is pretty easy though. Connect with USB, reboot, and pair.
Sent from my Nexus 7 using XDA Premium HD app
Anyone else have there ps3 controller red lights keep flashing and not sync with the ouya at all?
Sent from my Amazon Kindle Fire using xda app-developers app
Just tried it and it worked thanks
My red lights always flash, even after paired and when using. That is normal. Make sure you hook it up to USB first, make sure you can control it using Wired, then pull the power from the Ouya and remove the USB. When it boots back up, at the Pairing screen, you can pair the PS3 wirelessly.
Then it works just like the Ouya controller. You can jump in any time.
Anyway to turn off the PS3 controller once it's connected without manually turning off the OUYA? That seems to be the only way other than going into BT settings and disconnecting it.
Related
Not sure if everyone is aware of this yet? Reported at Droidgamers yesterday. I have a Note now and can confirm that WiiMotes work on a completely stock ICS ROM. I can also confirm that PS3 controllers also work via USB OTG now on the Note (previously they only worked via the Sixaxis app). I see another user has confirmed that midi devices also work with the Note via USB OTG. Details here.
Any S2 owners here able to confirm re: PS3 controller and/or midi devices?
Just tried the Logitech F310, no go (presume same reason as the Xbox 360 wired controller - high drain device without it's own power supply.
Just tried a PS3 pad, all genuine cables etc. Nothing on my phone. Just the prompt saying a USB connector being attached. The pad is looking for my PS3 when I turn it on.
dave106 said:
Just tried a PS3 pad, all genuine cables etc. Nothing on my phone. Just the prompt saying a USB connector being attached. The pad is looking for my PS3 when I turn it on.
Click to expand...
Click to collapse
Was the PS3 powered-off when it was connected? Mine was, plug it in and the LEDs on it start flashing (there is no notification in the phone to say it recognises the controller), press the PS3 button then and it was all go - it didn't turn on the PS3 when I did this.
NZtechfreak said:
Was the PS3 powered-off when it was connected? Mine was, plug it in and the LEDs on it start flashing (there is no notification in the phone to say it recognises the controller), press the PS3 button then and it was all go - it didn't turn on the PS3 when I did this.
Click to expand...
Click to collapse
The pads leds dont come on when its all wired up. With my PS3 on standby, hitting PS turns it on and connects to that. With the PS3 unplugged, push PS and all 4 leds flash until it gives up.
dave106 said:
The pads leds dont come on when its all wired up. With my PS3 on standby, hitting PS turns it on and connects to that. With the PS3 unplugged, push PS and all 4 leds flash until it gives up.
Click to expand...
Click to collapse
Interesting, I guess for whatever reason the S2 isn't working with them yet then. May come in a future update since the Note is working with them.
Keep forgetting Wiimotes dont work on the S II even with apps...about time they fixed that. Not that Im upgrading to ICS anyways
Cptnodegard said:
Stop relying on those bull**** official features for things like this. Go get USB/BT Joystick Center and plug in whatever you want.
Wiimote support is nice though
Click to expand...
Click to collapse
I'm not relying on official anything, been using PS3 controllers etc with mine for ages via Root, but it's still nice to see this stuff appearing officially too.
Is there any special configuracion dor a WiiMote, or i just simply turn my bluetooth on and search it??
NZtechfreak said:
I'm not relying on official anything, been using PS3 controllers etc with mine for ages via Root, but it's still nice to see this stuff appearing officially too.
Click to expand...
Click to collapse
Yeah I forgot which forum I was in, and that the Wiimote isn't supported on the S II even with third party software up until now. It's just been pissing me off how much attention game controllers have gotten on Android with ICS, when you can do it and 100 times better with any version
alejandroyoh said:
Is there any special configuracion dor a WiiMote, or i just simply turn my bluetooth on and search it??
Click to expand...
Click to collapse
You'll need an app like Wiimote Controller from the Play Store.
yes you can connect a wiimote with that app but i know that this does not work with stock versions of ICS
Hey dudes,
I have a wired 360 controller and tried plugging it into my note 8.All I get is a blinking green circle on the controller and nothing on the note. Anyone know how to get it working? I'm using an OTG micro to usb cable.
thegrog said:
Hey dudes,
I have a wired 360 controller and tried plugging it into my note 8.All I get is a blinking green circle on the controller and nothing on the note. Anyone know how to get it working? I'm using an OTG micro to usb cable.
Click to expand...
Click to collapse
I thought that although the PS3 controler is plug and play with andoid, the 360 controller is not, or at least not very easily set up.
I use my PS3 controller both as a plug and play controller and as a bluetooth controller (when I can be bothered to set it up, loading the address into it can be a bit of a pain since I use it with my PS3 as well).
Hey All,
I've contacted OUYA support (and have a dialog going with them) about this, but thought I'd throw a line out here as well.
I've got a bluetooth Microsoft Entertainment Keyboard 7000 as well as a USB Logitech K400 keyboard.
Both work pretty well with the OUYA (though I don't use both simultaneously for obvious reasons).
One thing I've noticed, however, is that no matter what order I pair the OUYA controllers and keyboard (or connect the USB keyboard) in, the keyboard ends up being player 1 after a period of time.
Example:
Pair OUYA controller 1
Pair OUYA controller 2
Connect USB keyboard
After a day or so, and possibly a full power cycle of the device, the keyboard ends up being Player 1.
This doesn't pose an issue for the most part (the OUYA controllers display that they are players 2 and 3), but some games specifically rely on the device that is identified as Player 1 to actually be an OUYA controller in the game, and therefore I have to go through a whole rigamarole of unpairing all controllers / keyboards, disconnecting the USB keyboard, and doing a full shutdown of the device, then powering it back on and waiting for the pairing wizard to pop up so I can re-pair my controllers.
The real question here is, has anyone else experienced this, and if so have you found a viable workaround?
I'd prefer that the keyboard (whether USB or bluetooth) doesn't get detected as a controller period, but simply acts as an auxiliary means of input for fields where I need to type something in, move a mouse, etc.
Thanks!
pitcherj
Yes, I have exactly the same issue with a Logitech K400 as well. Very annoying, I haven't found a workaround yet.
I have an Ouya controller, a PS3 controller and the K400 in that order and after a while the K400 takes over controller position 1.
There needs to be some way of locking controller 1, or at least a way to quickly change controller positions from within the interface without needing to repair everything.
I had the exact same problem, after looking around for several days trying to find a way to get my controllers paired to slot 1&2. Installed the Blue Board app from the OUYA market.
I've been installed it on my phone, got to to to pair, and used it a couple of times. After that I noticed that my controllers properly paired to slot 1 & 2, and if I hook up my keyboard it properly goes into a different slot.
Blasted from my Samsung Galaxy SIII (CM10.1 Masta Mix).
Over here it is the same problem.
I use a Rapoo E2700 Keyboard with touchpad. It is connected via a seperate USB wireless-dongle.
[A little o.t. but i want to tell everybody thant the keyboard is working great! The Touchpad is super smooth and (unlike the Ouya Controller Touchpad) realy good to navigate a mouse cursor]
It would be nice if there was a menue where you could assign wich Device takes wich controller-slot. Working without a keypboard is a little annoying to me.
Same for all my keyboards, i think it might be intentional.
Everytime I plug in my keyboard dongle it causes the system to lock up and i have to restart, but if I boot with the keyboard hooked up its player 1. They need to get this fixed
Edit: It seems that removing my hub and pluging straight into the ouya works... but now I've no way to use xbox controllers...
After reading through this thread, I'm beginning to wonder if it has something to do with using keyboards meant for PC. The reason I say this is I have had my Motorola Bluetooth Keyboard made for the Xoom paired since the day i got it and it never took over any controller port, but 1 full power cycle with my Logitech USB keyboard and it took over 1st controller.
Does anyone else have a android BT keyboard they can try?
Xbox wireless dongle as well as a el'cheapo GE USB keyboard do the exact same thing... very very annoying
Sent from my Nexus 10 using Tapatalk HD
JLCollier2005 said:
After reading through this thread, I'm beginning to wonder if it has something to do with using keyboards meant for PC. The reason I say this is I have had my Motorola Bluetooth Keyboard made for the Xoom paired since the day i got it and it never took over any controller port, but 1 full power cycle with my Logitech USB keyboard and it took over 1st controller.
Does anyone else have a android BT keyboard they can try?
Click to expand...
Click to collapse
I think this is tied to USB taking priority over Bluetooth. Every USB HID I plug in ends up becoming player one.
Sent from my MB860 using xda app-developers app
---------- Post added at 01:47 AM ---------- Previous post was at 01:44 AM ----------
Sinderan said:
Everytime I plug in my keyboard dongle it causes the system to lock up and i have to restart, but if I boot with the keyboard hooked up its player 1. They need to get this fixed
Edit: It seems that removing my hub and pluging straight into the ouya works... but now I've no way to use xbox controllers...
Click to expand...
Click to collapse
Are you using a powered USB hub? My non powered USB hub does the same thing.
If a powered hub doesn't do it, it might have something to do with the power draw on that single port.
Sent from my MB860 using xda app-developers app
ja450n said:
I think this is tied to USB taking priority over Bluetooth. Every USB HID I plug in ends up becoming player one.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I think its more just because The USB connects on boot, while the bluetooth controllers and keyboards have to be turned on. Since the USB where already there they get the first spot and the rest get whats there when they connect.
ja450n said:
Are you using a powered USB hub? My non powered USB hub does the same thing.
If a powered hub doesn't do it, it might have something to do with the power draw on that single port.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Yea I think I need a powered hub. I left one at my moms house I'll probably go pick up today when I remember. (Wow I never thought that hub that came with Rock Band 1 on Xbox would ever be useful again lol)
https://support.ouya.tv/entries/247...A-controller-not-shown-as-Controller-1-or-if-
This is their solution.
Sent from my Transformer TF101 using Tapatalk 2
Is it really possible to connect ps4 controller to amazon fire tv..I've seen video on YouTube someone did that by pressing share and home bottoms same time then its worked..i tried that along with everything and it always failed to connect..it's keep saying my controller is not in range while I'm only 4 to 5 feet away..can someone help on how to please
would be appropriate
Theres supposedly differnt revisions of the DS4 that behave slightly differnt then others ... its been said launch controllers wont connect .. what revision that is
The controller I have is practically useless the input lag increases the more i use it *distance doesnt matter* and it will get unusable very quick with over a minute lag.
I suggest getting a differnt controller.
.
Thanks for reply
I use my PS4 controller with my Amazon Fire TV all the time,it's the best controller for Amazon Fire TV IMO.never had any issues.
Pairing it very easy,but can be a little confusing as it's a 2 step task.
First you need to go to controller pairing setting on AFT and search for new controller,meanwhile you must turn of the PS4 controller and hold share and power button at the same time,you will notice the PS4 controller will start flashing.
here is the tricky part,on your TV you will see a unknown controller (or something similar) becomes available,now you must click on that and press Share+power again on the PS4.
After that it will be paired and you will get a message confirming that.
Alsomake sure you unplug the PS4 console itself if you have one,because otherwise the controller will turn the PS4 on and conflics with pairing process with AFT.
I use a seperate PS4 controller with AFT.
I am currently using the Sixaxis app with sony ps3 dualshock controller to control my fire tv - it works great - has support for home button, mouse mode and can be customized very well.
My only problem is that, the controller will not charge no matter what - from the fire tv directly, or when connected to pc, or from a wall charger.
The only way to charge it is to reset it (via the small pinhole in the back), or connect it to ps3 - this will make it lose the pairing with the fire tv and it will start charging again. I will have to set the bluetooth address again via the SixaxisPairTool from PC to get it to pair with the fire tv again.
My first question is - does the charging work for you after you have used the SixaxisPairTool from PC?
I also have a gamestop red samurai v2 controller. This pairs and works with the fire tv without any special app. However, misses mouse control.
I went through the threads here and understand that by creating a custom keyboard.kl file we can get the behavior we want for that controller. Can that idea be used to control mouse behavior as well? Any pointers would be welcome.
Thanks.
deepasadish said:
I am currently using the Sixaxis app with sony ps3 dualshock controller to control my fire tv - it works great - has support for home button, mouse mode and can be customized very well.
My only problem is that, the controller will not charge no matter what - from the fire tv directly, or when connected to pc, or from a wall charger.
The only way to charge it is to reset it (via the small pinhole in the back), or connect it to ps3 - this will make it lose the pairing with the fire tv and it will start charging again. I will have to set the bluetooth address again via the SixaxisPairTool from PC to get it to pair with the fire tv again.
My first question is - does the charging work for you after you have used the SixaxisPairTool from PC?
I also have a gamestop red samurai v2 controller. This pairs and works with the fire tv without any special app. However, misses mouse control.
I went through the threads here and understand that by creating a custom keyboard.kl file we can get the behavior we want for that controller. Can that idea be used to control mouse behavior as well? Any pointers would be welcome.
Thanks.
Click to expand...
Click to collapse
hah, so you're here as well... I also have/had ps3 controller paired with sixaxis, but I haven't used it for a while and ATM does need to be charged with actual PS3.
So, to answer your question PS3 controller did work(charged via phone charger and xbox one usb) for me after it was paired with sixaxis for long time until eventually I stopped using it and then ran out of juice. Now it needs PS3 to charge again (maybe once), before I can reuse wall charger. Problem is, I don't have PS3 on me.
yep. the ps3 controller with sixaxis app works so beautifully with both regular apps and side loaded apps (that require mouse), it is a shame that it cannot be charged.
i have it setup such that the right analog is mouse (always in mouse mode), left analog is rew/ff/prev/next, d-pad is d-pad, L1 and R1 are left and right mouse, etc.
the problem is the sixaxis tool works only with sony ps3 controller. is there any other app like this that will do the same with any controller? thanks.
deepasadish said:
yep. the ps3 controller with sixaxis app works so beautifully with both regular apps and side loaded apps (that require mouse), it is a shame that it cannot be charged.
i have it setup such that the right analog is mouse (always in mouse mode), left analog is rew/ff/prev/next, d-pad is d-pad, L1 and R1 are left and right mouse, etc.
the problem is the sixaxis tool works only with sony ps3 controller. is there any other app like this that will do the same with any controller? thanks.
Click to expand...
Click to collapse
well there are xbox 360 and xbox one controllers "how to" here, but I haven't tried them since both somewhat requires usb cable or dongle because they are not bluetooth based. and just repeating myself here, but ps3 controller does charge using other options and NOT ps3 only. BUT if it dies, then PS3 is required to recharge because you'll have to reset it.
ok. i am not sure why the charging does not work for me though. it won't even charge from PC once the SixAxisPairTool changes the mac address.
i saw the tincore app and i am planning to try it today with my gamestop controller.
How did you configure the sixaxis controller app? Whenever I try to connect the controller it never finds it even if i have the correct bluetooth address paired.
SUCCESS with tincore app. configuration is a bit difficult due to access via the fire tv remote and due to some menu items not showing up fully. however, once configured, the gamestop red samurai v2 remote works flawlessly - for necessary buttons as well as mouse.
i cannot get it to auto apply on restart and will investigate that later. for now, i am happy . thanks.
rfarina51 said:
How did you configure the sixaxis controller app? Whenever I try to connect the controller it never finds it even if i have the correct bluetooth address paired.
Click to expand...
Click to collapse
not sure what you are missing, but you can try this:
1. start the sixaxis server in fire tv and get the bluetooth address from bottom left
2. use the SixaxisPairTool in PC to set that address on the controller (for good measure you can reset the controller first by the pinhole in the back)
3. now pressing the glass PS button on controller should pair it