Related
Sup guys,
I'm facing a problem when I try to install a CFW. Today I recieved the Tab 3 8.0 LTE (shows model number SM-T315).
I installed TWRP successfully, root also worked fine but when installing the unofficial CM (4.4.2) or MOKEE (4.4.2) FW it shows an error like "this is a "tab8wifi"".
What's wrong? Anyone else experienced that error or knows how to solve it?
Thx in advance
Peace
Anon0511 said:
Sup guys,
I'm facing a problem when I try to install a CFW. Today I recieved the Tab 3 8.0 LTE (shows model number SM-T315).
I installed TWRP successfully, root also worked fine but when installing the unofficial CM (4.4.2) or MOKEE (4.4.2) FW it shows an error like "this is a "tab8wifi"".
What's wrong? Anyone else experienced that error or knows how to solve it?
Thx in advance
Peace
Click to expand...
Click to collapse
Where did you get that TWRP?
It has the wrong default.prop in the ramdisk.
Sent from my SCH-I605
gr8nole said:
Where did you get that TWRP?
It has the wrong default.prop in the ramdisk.
Sent from my SCH-I605
Click to expand...
Click to collapse
Hey,
thx for your respond. I used this one:http://forum.xda-developers.com/showthread.php?t=2525630
I'll be back in a few h and will retry with another TWRP! I would appreciate it if you could link me to one.
Peace
EDIT: just flashed the correct PHILZ recov. Will try later.
Here is the correct TWRP (obviously pick the T315 version) - http://forum.xda-developers.com/showthread.php?t=2619518
Gilly10 said:
Here is the correct TWRP (obviously pick the T315 version) - http://forum.xda-developers.com/showthread.php?t=2619518
Click to expand...
Click to collapse
Hey thx, but I already installed the correct PHILZ one. CM installation worked fine! Thx
Anon0511 said:
Hey thx, but I already installed the correct PHILZ one. CM installation worked fine! Thx
Click to expand...
Click to collapse
I got a T-315 too..
Can you please post a link to the correct Philz recovery??
And the CM that you used.?
Thanks... and good job with yours.
jimmbomb said:
I got a T-315 too..
Can you please post a link to the correct Philz recovery??
And the CM that you used.?
Thanks... and good job with yours.
Click to expand...
Click to collapse
Hey, thx.
Ofc I can.
I used this PHILZ flashed via Odin: http://forum.xda-developers.com/showthread.php?t=2598976
And this CM: http://forum.xda-developers.com/showthread.php?t=2557573
Good luck m8!
C6502 Malaysia version .283 FTF :
Here
Stripped Kernel .283 MY :
Here
Deodexed .283 :
Here
For Deodex:
1. Put it in your phone memory
2. Flash
3. WIPE CACHE AND DALVIK CACHE
4.Done and Enjoy!!!!
it is 283,not 238,lol
leeaman said:
it is 283,not 238,lol
Click to expand...
Click to collapse
Haha thanks for spotting.
Any way to root it ??
Sent from my C6502 using XDA Free mobile app
rstizza said:
Any way to root it ??
Sent from my C6502 using XDA Free mobile app
Click to expand...
Click to collapse
Flash the old kernel after flashing the 4.4.4 update then root it and then update the kernel back to the latest.
works perfect! really thanks man, update works fine the menu doesnt have that lag connection is better i still verifying battery long
hey do you have a root for this firmware?
Kendosis said:
Flash the old kernel after flashing the 4.4.4 update then root it and then update the kernel back to the latest.
Click to expand...
Click to collapse
any link to the old kernel? i've updated to 4.4.2 via OTA so otherwise i have to download the whole FTF
try to root with this apks
Install it and run towelroot apk
install and update su binarys
reboot
What mean Customized?
I'm coming from AOSP, can I flash the deodex one directly? or should I flash the ftf first?
Jaycel0820 said:
hey do you have a root for this firmware?
Click to expand...
Click to collapse
Since I tried, it isnt possible with easy rooting toolkit, you need to flash back .230 kernel > root it > flash, back the .283 kernel. you are done
yihyeh said:
I'm coming from AOSP, can I flash the deodex one directly? or should I flash the ftf first?
Click to expand...
Click to collapse
Oh no, you need to have the stock ROM first (flash FTF first) then can flash the deodex zip
batrian said:
Since I tried, it isnt possible with easy rooting toolkit, you need to flash back .230 kernel > root it > flash, back the .283 kernel. you are done
Oh no, you need to have the stock ROM first (flash FTF first) then can flash the deodex zip
Click to expand...
Click to collapse
thanks man ,
so towelroot does not work ?
demonicangell™ said:
thanks man ,
so towelroot does not work ?
Click to expand...
Click to collapse
no worries man. I only used : "Easy Root Tool for various Xperia devices" which is towelroot I guess? and it didnt work.
batrian said:
no worries man. I only used : "Easy Root Tool for various Xperia devices" which is towelroot I guess? and it didnt work.
Click to expand...
Click to collapse
https://towelroot.com/ this ?
demonicangell™ said:
https://towelroot.com/ this ?
Click to expand...
Click to collapse
No I didnt use that website before, maybe you can give it a try with this new kernel?
batrian said:
No I didnt use that website before, maybe you can give it a try with this new kernel?
Click to expand...
Click to collapse
yup will flash the ftf tonight and report .
edit : nope, not working . exploit has been patched apparently .just went through z section
can someone upload your 4.4.4 setting.apk pls
Jaycel0820 said:
can someone upload your 4.4.4 setting.apk pls
Click to expand...
Click to collapse
extract it from the deodex ?
ow thanks
Good News! You can now successfully root C6502 FW 10.7.A.0.222 with KingRoot!
Also works on C6506 tested by @charitha19
very good news, how about c6506
charitha19 said:
very good news, how about c6506
Click to expand...
Click to collapse
Idk, try it if you want and share the results!
kingroot working for xperia ZL v6506 5.1.1
hi
build number is 10.7.A.0.222
yay !
Root Failed
Device Name: Sony Xperia ZL
Device Model: C6502
Android Version: 5.1.1
Build Number: 10.7.A.0.222
xreinx said:
Root Failed
Device Name: Sony Xperia ZL
Device Model: C6502
Android Version: 5.1.1
Build Number: 10.7.A.0.222
Click to expand...
Click to collapse
Try several times. My first attempt failed too! Also check your internet connection.
danail23 said:
Try several times. My first attempt failed too! Also check your internet connection.
Click to expand...
Click to collapse
hi your using their .apk??
i tried both (.apk and .exe)
both failed
received a reply from kingroot support:
"Hi,
Thanks for your mail.
The device is not well supported by Kingo at this moment.
We will keep trying, and send mail to you when it is supported.
Sorry to keep you wait.
Regards,
Echo"
xreinx said:
hi your using their .apk??
i tried both (.apk and .exe)
both failed
received a reply from kingroot support:
"Hi,
Thanks for your mail.
The device is not well supported by Kingo at this moment.
We will keep trying, and send mail to you when it is supported.
Sorry to keep you wait.
Regards,
Echo"
Click to expand...
Click to collapse
Sorry to hear you have problems. I used the newest apk file downloaded from their official site.
danail23 said:
Sorry to hear you have problems. I used the newest apk file downloaded from their official site.
Click to expand...
Click to collapse
yea too bad,
i was hoping that my phone will be rooted by this app.
but o` well, better to find new way again
require Unlocked bootloader?
longlnn said:
require Unlocked bootloader?
Click to expand...
Click to collapse
Nope! It works on locked BL. My BL is locked and after the kingroot i installed xz dual recovery for locked BL and flashed Chainfire's SuperSu beta 2.52 (also if someone have updating binary error with the supersu just flash the newest beta version and the binary will be updated! Also dont forget to create a nandroid backup before flashing the beta version of the supersu cause you can get a bootloop!)
Didn't Work
Didn't Work for me too,I tried several times! Sad!
Sony C6502 ,5.1.1 and FW-10.7.A.0.222
Which Version of Kingroot did you guys used?
Zombeeeh said:
Didn't Work for me too,I tried several times! Sad!
Sony C6502 ,5.1.1 and FW-10.7.A.0.222
Which Version of Kingroot did you guys used?
Click to expand...
Click to collapse
They have a really complicated versions for me. Anyway, i used the version 4.6.0 update from 11.11.2015
Edit: This is the name of the apk file "NewKingrootV4.60_C132_B232_office_release_2015_11_11_105003.apk"
woah, got my root today!
Device Name: Sony Xperia ZL
Device Model: C6502
Android Version: 5.1.1
Build Number: 10.7.A.0.222
Boot Loader: Locked
Click to expand...
Click to collapse
this is what i use to root my ZL
kingroot.net
then i install their apk
cheers!
xreinx said:
woah, got my root today!
this is what i use to root my ZL
kingroot.net
then i install their apk
cheers!
Click to expand...
Click to collapse
Nice! And thanks for sharing the results.
YAY!
danail23 said:
They have a really complicated versions for me. Anyway, i used the version 4.6.0 update from 11.11.2015
Edit: This is the name of the apk file "NewKingrootV4.60_C132_B232_office_release_2015_11_11_105003.apk"
Click to expand...
Click to collapse
Thanks bro!,This version worked for me . How did you install xzdualrecovery ? .Can you please mail me the link
mailid: [email protected]
Zombeeeh said:
Thanks bro!,This version worked for me . How did you install xzdualrecovery ? .Can you please mail me the link
mailid: [email protected]
Click to expand...
Click to collapse
Glag i helped you! Here is everything you need to know about xzdualrecovery. Check there if your device is compatible. Read how to install using the installer and how to use it.
Ty
Thank you bro ! It helped me
danail23 said:
Glag i helped you! Here is everything you need to know about xzdualrecovery. Check there if your device is compatible. Read how to install using the installer and how to use it.
Click to expand...
Click to collapse
hi got a question about dualrecovery,
do you replace kingroot into superSU to install this recovery?
because the options are:
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
i used the installer one.
"ZL-lockeddualrecovery2.8.21-RELEASE.installer.zip"
Thanks
xreinx said:
hi got a question about dualrecovery,
do you replace kingroot into superSU to install this recovery?
because the options are:
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
i used the installer one.
"ZL-lockeddualrecovery2.8.21-RELEASE.installer.zip"
Thanks
Click to expand...
Click to collapse
Yes i did, but was kind of hard work... Try to install supersu from google play and select option 1!
I've tried a few versions but only got as far as getting stuck in a bootloop
UPDATE: Xposed now works on The Sprint Note 4 on MM!!! Here's the link
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
WeMakePies said:
I've tried a few versions but only got as far as getting stuck in a bootloop
Click to expand...
Click to collapse
How did you root 6.0.1? I took the OTA update, I wasn't aware that you could root it so early.
Kris_b1104 said:
How did you root 6.0.1? I took the OTA update, I wasn't aware that you could root it so early.
Click to expand...
Click to collapse
I saw in another forum that you should be able to use CFAR. I'll find and link it here.
Update: check out the OP here, once you click on the link, you can just ask any questions there.
http://forum.xda-developers.com/showthread.php?t=3344871
---------- Post added at 02:36 PM ---------- Previous post was at 02:30 PM ----------
WeMakePies said:
I've tried a few versions but only got as far as getting stuck in a bootloop
Click to expand...
Click to collapse
Start here if you haven't already:
http://www.xda-developers.com/xposed-for-marshmallow-is-here/
Kris_b1104 said:
How did you root 6.0.1? I took the OTA update, I wasn't aware that you could root it so early.
Click to expand...
Click to collapse
I just used the latest CF AutoRoot by chainfire for the Note 4 and it just worked!
Edit : Heres the link https://download.chainfire.eu/585/CF-Root/CF-Auto-Root/CF-Auto-Root-trltespr-trltespr-smn910p.zip
kcsween;66066446
[/COLOR said:
Start here if you haven't already:
http://www.xda-developers.com/xposed-for-marshmallow-is-here/
Click to expand...
Click to collapse
We're are now just waiting for Wanam to Patch an Xposed module for Samsung Devices that run marshmallow, it seems that the Note 4 for some reason isn't using the same method as the others and will only put us in a boot loop.
Kris_b1104 said:
How did you root 6.0.1? I took the OTA update, I wasn't aware that you could root it so early.
Click to expand...
Click to collapse
All you have to do is install latest twrp which is the sprint 3.0 and install the latest SuperSU which is the 2.68 which is made especially for the MM. There isn't a kernel yet bit that's being worked on. Here's where you can do it at:
http://androiding.how/galaxy-note-4-marshmallow-root/
Just curious if anyone and explain why I keep getting stuck on the Sprint logo during boot up after I flash the arm 80 xposed file in twrp?
Sent from my SM-N920P using Tapatalk
psmith1539 said:
Just curious if anyone and explain why I keep getting stuck on the Sprint logo during boot up after I flash the arm 80 xposed file in twrp?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
I think its because of the OTA Marshmallow update is Odex'd though I'm not 100% sure about that. Anyways within a week Wanam should have a fix out. (Hopefully) Though the only thing thats stopping him at this point is that he needs Logcats to find out why its bootlooping.
you guys are nuts. i thought xposed is only fully functional on a deoxed rom? stock is not deoxed. even if it gets working. it wont fully work unless you deoxed the rom your self. or a dev releases a deoxed version.
kaos420 said:
you guys are nuts. i thought xposed is only fully functional on a deoxed rom? stock is not deoxed. even if it gets working. it wont fully work unless you deoxed the rom your self. or a dev releases a deoxed version.
Click to expand...
Click to collapse
Nope, works on odexed lollipop rom just fine. Wanam recently posted a test build for Sprint Marshmallow. Not on marshmallow myself, so I can't test it.
beezar said:
Nope, works on odexed lollipop rom just fine. Wanam recently posted a test build for Sprint Marshmallow. Not on marshmallow myself, so I can't test it.
Click to expand...
Click to collapse
i tested it, and it did not work. I'm not that knowledgeable with this stuff, but am trying to work with him via his xposed thread to get it going for us.
There's a beta version of the xposed framework from wanam.
I sent a message to wanam to take the permission to post it here.
I'll try it today.
Sent from my SM-N910P using Tapatalk
anees02 said:
There's a beta version of the xposed framework from wanam.
I sent a message to wanam to take the permission to post it here.
I'll try it today.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
This is great news! When I find out if this beta version is fully working w/o bootlooop, I will update the thread on how to install the Xposed Framework~
WeMakePies said:
This is great news! When I find out if this beta version is fully working w/o bootlooop, I will update the thread on how to install the Xposed Framework~
Click to expand...
Click to collapse
Unfortunately the beta version didn't work.
There is still frozen on sprint logo.
But wanam wants more feedback to solve this problem.
Participating in his thread will make a quick solution.
http://forum.xda-developers.com/showthread.php?t=3180960
Sent from my SM-N910P using Tapatalk
has anyone got it working yet?
I tried today, it got struck in boot screen.
@zetrez98 is not working at all!
Sent from my SM-N910P using Tapatalk
it works now !!! check out wanams thread linked earlier
zetrex98 said:
it works now !!! check out wanams thread linked earlier
Click to expand...
Click to collapse
Thank you! Just updated the thread!
I had to use the "alt" version, but it works! So far ive only tried the youtube ad away module
Got my hands again on the stock factory image Will be providing link for it soon for people to customize it, and hopefully @codeworkx can take the camera improvements for these and put it to the LineageOS 13 to improve camera function.
https://www.mediafire.com/?6almos553oh0xg6
Enjoy.
Chinese ROM right?
Sent from my X526 using Tapatalk
This is the for the American x522 but I have it installed on my X527 and it works perfectly.
Wow!!! Eagerly waiting to try something bugfree n stockish...:silly:
Waiting for the link
Akhil16 said:
Wow!!! Eagerly waiting to try something bugfree n stockish...:silly:
Click to expand...
Click to collapse
Stockish no, it's the official stock ROM.
Waiting for the full tom link. And how to update/Flash it?
I stucked on 5.8.15s. No OTA update
Gingernut78 said:
Stockish no, it's the official stock ROM.
Click to expand...
Click to collapse
Thanku so muchh sir... I didnt knew it ws stock
N where is the link op???
How much more time for posting the link???
He wrote 'soon'
Could have been some hours, or can be months.....
Since there is no Rom is uploaded, it should be moved to general discussion.
JamBax said:
He wrote 'soon'
Could have been some hours, or can be months.....
Click to expand...
Click to collapse
LOL... Apologize for the delay but it's now up!
But now I know what the other devs feels when people keep asking for ETA :\
Will it work on x526?
Ashish Banka said:
Will it work on x526?
Click to expand...
Click to collapse
Yes
Can you please post some screenshot of the changes and also please confirm if VoLTE and jio are working fine on indian version x526 also please confirm as in the latest update of american version the app drawer button is added so is it there in this update or not. Are there any Chinese or any other bloatware in it???
hey so i downloaded it
but while installing thru twrp 3.0.2 official one its is showing error :7
this zip is for le_s2_na and your device is s2... i m installing it on my x526 le 2 indian version... so whats wrong ??
Akhil16 said:
hey so i downloaded it
but while installing thru twrp 3.0.2 official one its is showing error :7
this zip is for le_s2_na and your device is s2... i m installing it on my x526 le 2 indian version... so whats wrong ??
Click to expand...
Click to collapse
Flash it via stock recovery
shivam321998 said:
Flash it via stock recovery
Click to expand...
Click to collapse
tried to upgrade from stock recovery:
Upgrade failed!
Electric Blue said:
tried to upgrade from stock recovery:
Upgrade failed!
Click to expand...
Click to collapse
Let's go for the hardway
open the zip on your PC send me the screenshot of updater-script, open it by notepad++(ROMzip>>>meta-inf/com/google/android)
shivam321998 said:
Let's go for the hardway
open the zip on your PC send me the screenshot of updater-script, open it by notepad++(ROMzip>>>meta-inf/com/google/android)
Click to expand...
Click to collapse
here is the screenshot u needed