My question is if my mobile data internet is switched OFF and still if I choose 2g netwok mode only, will it affect my battery life then ?
Thanks in advance
Sent from my Galaxy Nexus using xda app-developers app
No, because it won't connect to any networks while being off.
If you turn mobile data off, then it doesn't matter what network mode you're in lol.
Is there any app or dialer code that i can use to set the mobile network type.. Ex: keep it on HSPA+ :15 or HSDPA :8? Seems like i got to keep restartin my phone alot to get my data to work at normal speed...
P.S. ive already did the *#*#4636#*#* it just goes back to WCDMA preferred
Sent from my Galaxy Nexus using Tapatalk 2
Hey all.
I am on wanamlite 2.7 and perseus 32.1
I have recently activated 3g on my phone.
I am on airtel which is a gsm carrier but 3g runs on wcdma only if I am correct.
Now the problem is I get 0 signals if I select wcdma only or 2g if I select gsm only. Now how can I select gsm for mobile network and wcdma for 3g. In auto mode I get almost 0 signals. It is very annoying to change it every time.
Sent from my GT-N7100 using xda app-developers app
UtkarshGupta said:
.
I am on airtel which is a gsm carrier but 3g runs on wcdma only if I am correct.
Now the problem is I get 0 signals if I select wcdma only or 2g if I select gsm only. Now how can I select gsm for mobile network and wcdma for 3g. In auto mode I get almost 0 signals.
Click to expand...
Click to collapse
You can't select dual mode like for mobile 2G and for data 3G
WCDAMA only is 3G only
GSM only is 2G only
Auto mode mode means your device will get connected to 3G whenever there is 3G network available, in case you are in area where 3G is not available it will connect to 2G.
when you are selecting WCDMA and not getting signal that suggest there is no 3G network available in your area.
it is advisable to keep Auto. so whenever there is 3g available you will get connect to it, and you can see 3G on status bar, when there is active data sync going on, it will be changed to H/H+
while whenever there is only 2G network available you can see E symbol in status bar.
If you have issue with Auto mode, then just try selecting network manually.
K thanks dr.
But the main prb is I am in my room.
If I select wcdma only then it connects to 3g otherwise in auto mode it stays in 2g mode.
Sent from my GT-N7100 using xda app-developers app
This can happens with poor netwok, if 3G have very poor signal and 2G having strong sometimes it prefers 2G
while you select WCDMA it forces to select 3G.
I get 1 forth or half signal in auto mode otherwise constantly full in gsm only. Irrespective of any other settings...
Sent from my GT-N7100 using xda app-developers app
you men you getting 1/4 th of 2G while auto, and full while GSM only
OR you are saying 1/4th or half of 3G network?
when you have less signal just check in setting-about phone-status - network type
---------- Post added at 02:21 PM ---------- Previous post was at 01:49 PM ----------
one more thing, though it have least chance..
if you are using other country ROM, then just try flashing indian ROM modem
you can get it from my stock ROM thread post#6
Ok I am on wanamlite 2.5 and csc indian changed via csc changer app.
If I select auto mode and am on wifi then I will get full signal (the 4 bars I am talking about).
If I select gsm still 4 bars and in wcdma 0 bars or no connection.
If I disable wifi.
In auto I get 4 bars if I am connected to 2g data or edge and e sign.
If it gets 3g signal with 3g or h or h+ sign I get 2 bars.
Edit:
Outdoors I get 4 bars with h+.
But indoors 1 or 2 bars with h+ or h or 3g but 4 bars with e or wifi.
I don't know if it was due to outdoors or wanamlite downgrade or csc change to inu.
Sent from my GT-N7100 using xda app-developers app
Also if I enable wifi I don't get 4 bars untill I reboot or go back and forth from gsm only and auto mode.
Sent from my GT-N7100 using xda app-developers app
UtkarshGupta said:
Edit:
Outdoors I get 4 bars with h+.
But indoors 1 or 2 bars with h+ or h or 3g but 4 bars with e or wifi.
I don't know if it was due to outdoors or wanamlite downgrade or csc change to inu
Click to expand...
Click to collapse
That's clearly suggests you have poor network in your room, but having strong network for edge(2g)
Here nothing can be helpful except airtel itself
Changing csc actually do nothing, if you want to try then just flash indian modem, this may be more tuned for our network.
Otherwise just change operator, we Indian have number portability, why to worry.
Sent from my GT-N7100 using xda premium
before flashing i wanna make sure modems are backwards compatible because I am on wanamlite 2.5 ubdll3.
and I don't think the latest modem ma6 was released back then.
so updating only modem is enough ?
and should it be flashed with pda tab only ?
Not released date but modem from india may have some fine tuning for Indian network
Yes download tar file from post i shown you previously and flash with pda tab of odin.
Indian modem will have letter 'dd' that is important.
Latest indian modem is ddlk6
Sent from my GT-N7100 using xda premium
dr.ketan said:
Not released date but modem from india may have some fine tuning for Indian network
Yes download tar file from post i shown you previously and flash with pda tab of odin.
Indian modem will have letter 'dd' that is important.
Latest indian modem is ddlk6
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
i downloaded the one that says
Stock Recovery/Kernel/Bootloader/Modem for latest MA6
Download
Extract it, you will get individual .tar files for bootloader,Kernel,Recovery and Modem.
Install required with PC/Mobile Odin.
Click to expand...
Click to collapse
so that isn't for india ?
and is this I gotta flash ?
and you didn't clarify if they were backwards compatible
UtkarshGupta said:
i downloaded the one that says
and is this I gotta flash ?
and you didn't clarify if they were backwards compatible
Click to expand...
Click to collapse
No that one is not latest but from ll7 rom
One you have described in quoted is perfect and extracting that file, you will find modem.tar that one is latest for India.
I don't think it have compatibility issue.
Wait I am updating link here
Edit here is latest for India
http://d-h.st/gFF
Sent from my GT-N7100 using xda premium
ok thanks I flashed the modem from ma6 file and now have baseband/modem = N7100DDDLK6
will report on signals after testing a bit.
If you have network issue then it not going to to help you as i said earlier, but at least it will rule out rom issue.
Sent from my GT-N7100 using xda premium
Yeah it's like what it was like before modem change.
I'll coop with it
Sent from my GT-N7100 using xda app-developers app
I have a optimusg e975,and in my menu
Settings ---> More ---> Mobile Networks ---> Network Mode ---> GSM/WCDMA/LTE auto, doesnt appear LTE only GSM/CDMA.....???
tanaru said:
I have a optimusg e975,and in my menu
Settings ---> More ---> Mobile Networks ---> Network Mode ---> GSM/WCDMA/LTE auto, doesnt appear LTE only GSM/CDMA.....???
Click to expand...
Click to collapse
I'm not sure but I believe that there isn't this option in the ROM because there isn't full cover of LTE signal yet
Sent from my LG-P880 using Tapatalk 2
GRG13 said:
I'm not sure but I believe that there isn't this option in the ROM because there isn't full cover of LTE signal yet
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
thanks!
Hey,
My device is F180L with version 4.4.2 after updating my device only on 2G
Does not work for me 3G or LTE
Please Help
Enter this in the phone dialer *#*#4636#*#*
Select phone information
From the drop down list below select the needed network type like 2g , 3g ,lte ,etc
Sent from my LG-E975 using XDA Free mobile app
MasterFURQAN said:
Enter this in the phone dialer *#*#4636#*#*
Select phone information
From the drop down list below select the needed network type like 2g , 3g ,lte ,etc
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
I tried and as I remember it was listed on the GSM GLOBAL AUTO
There is another option or way to fix the problem with the code?
Model F180L
Change it To GSM WCDMA LTE and reboot..
Check after reboot again to confirm
Sent from my LG G Flex F340K Stock KitKat 4.4.2 Rooted
using XDA Free mobile app
Murshad007 said:
Change it To GSM WCDMA LTE and reboot..
Check after reboot again to confirm
Sent from my LG G Flex F340K Stock KitKat 4.4.2 Rooted
using XDA Free mobile app
Click to expand...
Click to collapse
I really did checked and is the GSM or WCDMA
I registered but still more that 2G G
Perhaps you have advice on what to do about it?
I am in Israel for frequencies as Europe.
I have a Root device and the system is 4.4.2
Use 3845#*180#
For hidden menu
Sent from my LG G Flex F340K on LTE network, Stock KitKat 4.4.2 Rooted
using XDA mobile app
Murshad007 said:
Use 3845#*180#
For hidden menu
Sent from my LG G Flex F340K on LTE network, Stock KitKat 4.4.2 Rooted
using XDA mobile app
Click to expand...
Click to collapse
Registers where I set the nets?
The device should work in
3G in Europe and Israel right?
OK code works
But there where I set the frequency or open Ttdr?
In MODEM SETTING does not work: \
Does the 3845#*180# still work? I have the same problem. How did you fix it?
ClarkOwen said:
Does the 3845#*180# still work? I have the same problem. How did you fix it?
Click to expand...
Click to collapse
There are three codes
3845#*180#
*#*#4636#*#*
5457#*180#
Please tell me which one works on your mobile.
*#*#info#*#* is to set your network mode. Set it to LTE WCDMA GSM
And change Appropriate bands from other two codes or check on Auto select