So I have a few Tweaks for Build Prop if you would like to use them! I`m currently working on the guide so give me time I have to restore my computer tonight so after I do that I can provide some screenshots.
All these changes are done via Build Prop!
These Build Prop Changes Does the Following. Note: NONE of these changes I made NEVER applied til I reset the phone so you would need to wipe/reset the phone before they take affect! Also you will need to replace the LGBrowser_JB.apk under system/app with the International Optimus G Pro`s Browser as for some reason the one on here the address bar disapears but thats only if you use the stock browser.
1. No Carrier Name in Notification bar (Gets moved to bottom when opening notification bar. See Screenshots.
2. Gives 4 Signal Bars , International Data Icons (see screenshot 3G,H,LTE/4G) Instead of the AT&T Junk)
3. When Resetting the Phone it uses the Phones actual setup process that android uses and not AT&T`s Ready to Go Junk!
4. Just another Note!: Some of the changes from this edit will cause your APN to be blank so if you have no data be sure to check and or add the correct APN for your Carrier.
Build Prop Changes:
These will show a Standered international 4G data icon for 3G/HSPA+ and LTE for LTE.
ro.build.target_county: CA
ro.build.target_operator: TLS
These will show a standered international 3G data Icon for 3G/HSPA+ and 4G for LTE (Messes up settings menu pretty bad)
ro.build.target_county: SK
ro.build.target_operator: SKT
For The Korean Versions that want the AT&T 4G and 4G LTE Icons or if you want to change back and forgot.
ro.build.target_county: US
ro.build.target_operator: ATT
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Network Selection Mod:
This Build Prop Change is Simple! Under Mobile networks it gives you Network Selection which allows you to easily FORCE your phone on WCDMA(3G/HSPA) GSM(EDGE) Or LTE Only. Which in Low coverage areas is Great! This just makes it easier to change as it is just under the phones settings!
How To: Use your Build Prop Editor and Find:
Then just change it from disable to enable and now you should see it under settings - Mobile Networks.
Screenshot After Change Made: Uploading soon.
--------------------------------------------------------------------------------------------------------------------------------------------------------
Remeber I`m not responsible for anything done wrong. These Settings are confirmed working I changed too many eariler just playing about and I have to flash the stock firmware back on my phone Which I can`t at the moment til I restore my machine. I got a new motherboard today and windows wont freaking load cause it has an OEM copy installed (Microsoft!!! Grrrr). That`s why I cant 100% the guide cause a lot of things FC. I got happy and changed almost everything over to the same as the SKT Korean Version.
Does changing the target countries and carriers have any negative impact on the play store? I'm a little hesitant to change since some apps are country and/or carrier dependant.
Sent from my LG-E980 using xda app-developers app
draiko913 said:
Does changing the target countries and carriers have any negative impact on the play store? I'm a little hesitant to change since some apps are country and/or carrier dependant.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Not sure. I dont do carrier billing or anything like that. If anything you would have more lol. I know when I put my UK sim in any AT&T phone MORE apps ALWAYS show up lol.
Was like that with my Note 1,Note 2, S4,One, One X, Etc.
hyelton said:
Not sure. I dont do carrier billing or anything like that. If anything you would have more lol. I know when I put my UK sim in any AT&T phone MORE apps ALWAYS show up lol.
Was like that with my Note 1,Note 2, S4,One, One X, Etc.
Click to expand...
Click to collapse
So doing these edits and adding the international browser also let you have browser in your qslide apps in the notification area too? Also could you upload the browser
Sent from my LG-E980 using xda premium
acejoker25000 said:
So doing these edits and adding the international browser also let you have browser in your qslide apps in the notification area too? Also could you upload the browser
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
Not sure I dont use the qslide stuff.
Here is a link http://boxhost.co.uk/filehost/files/1/Public/LGBrowser_JB.apk
hyelton said:
Not sure I dont use the qslide stuff.
Here is a link http://boxhost.co.uk/filehost/files/1/Public/LGBrowser_JB.apk
Click to expand...
Click to collapse
Oh OK I was looking at your screen shots so I thought that was the case. Thanks for the link
edit: i can confirm this does indeed allow you to use browser as a qslide app wiithout any force closes
Sent from my LG-E980 using xda premium
I wanna confirm..that on the e980. Att. Version. U were able to move international ver. Of the browser to sys app replace the US version.and then edit build prop...to get the browser in it slide apps....I did this and did.not work..lol wanna make sure I didn't miss anything here...
Sent from my LG-E980 using xda premium
MrNa5ty said:
I wanna confirm..that on the e980. Att. Version. U were able to move international ver. Of the browser to sys app replace the US version.and then edit build prop...to get the browser in it slide apps....I did this and did.not work..lol wanna make sure I didn't miss anything here...
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
acejoker25000 said:
Oh OK I was looking at your screen shots so I thought that was the case. Thanks for the link
edit: i can confirm this does indeed allow you to use browser as a qslide app wiithout any force closes
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
Off topic but you from Hickory, NC? Thats about 30min from me
hyelton said:
Not sure I dont use the qslide stuff.
Here is a link http://boxhost.co.uk/filehost/files/1/Public/LGBrowser_JB.apk
Click to expand...
Click to collapse
It is the international apk browser??
Thanks.....
zxaz said:
It is the international apk browser??
Thanks.....
Click to expand...
Click to collapse
Yes it is.
hyelton said:
Off topic but you from Hickory, NC? Thats about 30min from me
Click to expand...
Click to collapse
Yup I'm from hickory lol
MrNa5ty said:
I wanna confirm..that on the e980. Att. Version. U were able to move international ver. Of the browser to sys app replace the US version.and then edit build prop...to get the browser in it slide apps....I did this and did.not work..lol wanna make sure I didn't miss anything here...
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
Make sure you wipe your phone as per directions and I didn't delete the stock browser just added .bak to the odex and apk files. I used the first set of build.prop edits since the second set messes with settings
Sent from my LG-E980 using xda premium
Awesome!! rarely see people into this stuff around here
hyelton said:
Awesome!! rarely see people into this stuff around here
Click to expand...
Click to collapse
Very true you're the first person I've found at least from the phones I've had
Sent from my LG-E980 using xda premium
MrNa5ty said:
I wanna confirm..that on the e980. Att. Version. U were able to move international ver. Of the browser to sys app replace the US version.and then edit build prop...to get the browser in it slide apps....I did this and did.not work..lol wanna make sure I didn't miss anything here...
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
lol my bad ...prop wasnt saving changes...didnt look at the botton message....assumed that it said saved ...thanks
its a nice mod to do.....but it just the fact that we"ve to wipe and reseting.....re-start from 0......no thanks for tonight....lollllll
Would you happen to know how to also get rid of the OTA updater on this phone?
zxaz said:
its a nice mod to do.....but it just the fact that we"ve to wipe and reseting.....re-start from 0......no thanks for tonight....lollllll
Click to expand...
Click to collapse
True but if you still have the files on your computer from when you first rooted it really only takes 5 minutes to be back up and running. Long as you use titanium backup.
Sent from my LG-E980 using xda premium
Okay, so ever since finding your thread, I have been messing around with the build.prop. I have enabled the Google setup instead of AT&T's crap and also the icons and such. I'm currently working on other things with the build.prop such as wifi scanning interval. I'm also pulling settings from the CM10.1 prop for options that the default stock prop might not have! So far I've been able to change the wifi interval scanning and others.
Jammol said:
Okay, so ever since finding your thread, I have been messing around with the build.prop. I have enabled the Google setup instead of AT&T's crap and also the icons and such. I'm currently working on other things with the build.prop such as wifi scanning interval. I'm also pulling settings from the CM10.1 prop for options that the default stock prop might not have! So far I've been able to change the wifi interval scanning and others.
Click to expand...
Click to collapse
I was comparing my stuff with the optimus g pro international build.prop. but there's a lot good mods and changes with build.prop never really messed with it til I got my s4 when it.first came.out with no roms so I had to learn to make.due haha.
I also took away that annoying att bootscreen and sound by replacing it.with the international ones
Sent from my LG-E980 using xda premium
Hotspot Tethering does not seem to work when switching from US to CA. It doesn't broadcast the SSID. I was able to get hotspot to work with the US ATT build prop only when I used the SQLITE Editor fix.
Anyone else have this problem?
Related
Transparent or inverted wallet depending on what rom your on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Most have a working wallet first.
For folks that have wallet working already do this
Rename your current wallet in system app to GoogleWallet.apk.back
Drop the new one in system/app
Fix permissions
Reboot
Done
***************************************
Part 2
For those that have never had a working wallet on there phone do this
Once you get it working and want the new one, do part 1
Read instructions very carefully and download the 2 files before starting
YOU ASSUME AND TAKE ALL RISK
YADYADA
1 . DO A NANDROID, reboot and turn nfc on
2. Flash part 1
http://www.blownco.com/index.php/doc_download/237-wallet-part-1-zip
3. You will get a few nfc crashes and some slow screens, just keep hitting ok.
4. Open Google wallet and wait for it to do its thing. Again keep clicking ok on the nfc crashes. When Google wallet is done you will either get a wallet fc or a screen saying you don't have network connection.
5. At this point navigate to system/app and DELETE the wallet apk
6 . Navigate to system, open the build prop in text editor and change these 3 lines to exactly:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
This will automatically create a backup of the original buildprop
7 . reboot
8. Download Google wallet from the market
9. Open wallet and let it do its thing. Wait for the fc or network error, click through any nfc fc.
For some of you, it may just work at this point.
You're done then
10. Once you get the wallet fc or network error. Navigate to data/app and DELETE the Google wallet apk.
Reboot into recovery and flash part 2
http://www.blownco.com/index.php/doc_download/238-wallet-part-2-zip
11. Open Google wallet and let it set up. It may take some time.
12. Once your all set up, navigate to system and delete the buildprop.apk and rename the buildprop.bak to buildprop.apk. If you don't see the bak one edit the existing one back to
For ATT users only
ro.product.model=SAMSUNG-SGH-I317
ro.product.brand=samsung
ro.product.name=t0lteatt
ro.product.device=t0lteatt
Any other carrier, I have no clue. Be smart and keep a copy of the original someplace safe
13. Reboot.
14. Done
Reserved
Worked for me on cleanrom 3.3. Setup completely. I will try to use it tomorrow! Thanks.
Update: just used google wallet to buy a drink from a coke machine. Worked without a problem! Thanks.
Sent from my SAMSUNG-SGH-I317 using xda premium
Thanks I'm just going to do a back up and load jelly thunder r2. On R1 now lol..
Since it has a 100% working wallet..
Another guide for wallet? How many do we need?
antiochasylum said:
Another guide for wallet? How many do we need?
Click to expand...
Click to collapse
At least 1 more. Is it killing you. This one happens to make the other three allot easier and since I started the other 2, does it matter.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
worked for me thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Im on Rogers in Canada, Google wallet is not available in the play store. However, I have seen the quick pay terminals and really want to give this a go. Does anyone know of another source for the Google wallet apk?
Sent from my SAMSUNG-SGH-I317 using xda premium
krazycanuck82 said:
Im on Rogers in Canada, Google wallet is not available in the play store. However, I have seen the quick pay terminals and really want to give this a go. Does anyone know of another source for the Google wallet apk?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
I have it, hang tight. We figured something out.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
krazycanuck82 said:
Im on Rogers in Canada, Google wallet is not available in the play store. However, I have seen the quick pay terminals and really want to give this a go. Does anyone know of another source for the Google wallet apk?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
This is the market version of wallet. It is the one you put in data/app. Side load it there, fix permissions, reboot. Start app, it won't work. Just open it for a few seconds and continue on with the steps above
http://www.blownco.com/DAFOXS/com.google.android.apps.walletnfcrel-1.apk
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
I'll have a 1 zip working method out tonight
Real easy
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Confirmed to work on the International Stock Rom also. Great work! Thanks.
Sent from my GT-N7105 using xda premium
Fyi, make sure you select your card and the "select card" icon is green before a purchase
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dafoxs said:
Fyi, make sure you select your card and the "select card" icon is green before a purchase
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Thahx D
So you saying check the card on the wallet app? I did that or are you speaking of the select card at the terminal. In store?
Just wondering because tried a few times yesterday but no go! But the couple of cashier said it wasn't working right cuz someone else tried with there phone!
So going to go try again today. Happy that I can at least have a WORKING WALLET ON MY PHONE. Thanks to you:good:
I have input my issues in red text throughout your instructions
I fear the issue is that there is once again no love for us canucks, any other Canadians get this to work??
dafoxs said:
Read instructions very carefully and download the 2 files before starting
Jelly Thunder has it working right out of the box. No need to do this
Sorry for a new post. I made this a little easier to do.
YOU ASSUME AND TAKE ALL RISK
YADYADA
This was made to work on Jelly Thunder. This involves 2 flashes and a build prop edit.
Confirmed working on:
Jelly Thunder
Clean Rom
International Stock Rom
No idea if it will work on other roms. You tell me
downloaded file from post 10, sideloaded to system/app and fixed permissions
1 . DO A NANDROID, reboot and turn nfc on
2. Flash part 1
http://www.blownco.com/DAFOXS/wallet_part_1.zip
at this point I don't get any crashes and opening GW displays the attached screen shot
3. You will get a few nfc crashes and some slow screens, just keep hitting ok. none of this happened
4. Open Google wallet and wait for it to do its thing. Again keep clicking ok on the nfc crashes. When Google wallet is done you will either get a wallet fc or a screen saying you don't have network connection. here I am still showing the same info as screen shot
5. At this point navigate to system/app and DELETE the wallet apk
6 . Navigate to system, open the build prop in text editor and change these 3 lines to exactly:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
This will automatically create a backup of the original buildprop
7 . reboot
8. Download Google wallet from the market I once again sideloaded the file fro post 10 and followed remaining instructions
9. Open wallet and let it do its thing. Wait for the fc or network error, click through any nfc fc.
For some of you, it may just work at this point.
You're done then
10. Once you get the wallet fc or network error. Navigate to data/app and DELETE the Google wallet apk.
Reboot into recovery and flash part 2
http://www.blownco.com/DAFOXS/wallet_part_2.zipIt is only now that GW actually starts and tells me setup will take up to 5 minutes before force closing
11. Open Google wallet and let it set up. It may take some time.
12. Once your all set up, navigate to system and delete the buildprop.apk and rename the buildprop.apk.bak to buildprop.apk.
13. Reboot.
14. Done
Sent from my Galaxy Nexus using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Bajanman said:
Thahx D
So you saying check the card on the wallet app? I did that or are you speaking of the select card at the terminal. In store?
Just wondering because tried a few times yesterday but no go! But the couple of cashier said it wasn't working right cuz someone else tried with there phone!
So going to go try again today. Happy that I can at least have a WORKING WALLET ON MY PHONE. Thanks to you:good:
Click to expand...
Click to collapse
Just make sure you select the card from within the app. First. If you don't the sale gets declined. Google wallet uses the same "virtual card" number for everyone. Check for the green icon
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dafoxs said:
Just make sure you select the card from within the app. First. If you don't the sale gets declined. Google wallet uses the same "virtual card" number for everyone. Check for the green icon
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Ok thanks. Got it..
Confirmed and worked out well! Thanks OP!
I'm on T-mobile Galaxy Note 2, with Cmenard 4.1.2 ROM.
Om watching the downloads, more step 1 are being downloaded. Is this thing working after the first flash for you guys?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dafoxs said:
Om watching the downloads, more step 1 are being downloaded. Is this thing working after the first flash for you guys?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I'm on T-mobile Note 2, had to flash 2 part zip, and worked out well.
If you are root then this method is recommended! This will allow the Facebook and messenger app to update smoothly through the play store without effecting Home.
Official release:
https://www.box.com/s/cwqlf37a9d5posphkljn
Installation:
*download release above
*open build prop in your favorite root explorer. (Located in system folder on root of device)
*mount system folder
*edit build.prop like shown in image below.
"Sam" is supposed to be "Samsung" if you type in Samsung and it stops at Sam just finish the word and save.
*reboot!
*install included apk like normal
*done
Be sure to update your Facebook app and messenger through market to the latest version!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--------------
If you don't want to mess with build.prop edits to get Facebook home then here is the link for a modified version: http://forum.xda-developers.com/showthread.php?t=2232307 [credit to ruthlessbeatle for finding this thanks!]
Just remember using that method will void any future updates Facebook releases for their primary app and messenger. You would need to either wait till he post the new updated apks or edit your build prop.
This is what I get when I try to open the link
Sent from my LG-LS970 using xda app-developers app
jamebarron88 said:
This is what I get when I try to open the link
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I did it through the Box app... Worked for me.
Edit: installed, but says device not supported... Any work around for this yet?
Sent from my LG-LS970 using xda app-developers app
outerpip said:
I did it through the Box app... Worked for me.
Edit: installed, but says device not supported... Any work around for this yet?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Have you updated your Facebook app and messenger first?
Edit: I edited my build.prop prier to "GT -I9300" and samsung as manufacture
Sent from my GT-I9300 using xda premium
tsdeaton said:
Have you updated your Facebook app and messenger first?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes
Sent from my LG-LS970 using xda app-developers app
I get the same device not supported
Sent from my LG-LS970 using xda app-developers app
outerpip said:
Yes
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Edit your build prop to gt-I9300 and Samsung as manufacture
Sent from my GT-I9300 using xda premium
Sent from my GT-I9300 using Tapatalk 2
Said it wasn't supported !
tsdeaton said:
Edit your build prop to gt-I9300 and Samsung as manufacture
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
maybe they arent using correct permissions when editing the build.prop? what does it need to b set to?
Sent from my LG-LS970 using xda app-developers app
tsdeaton said:
Edit your build prop to gt-I9300 and Samsung as manufacture
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Edited and it worked. Thanks.
Sent from my GT-I9300 using xda app-developers app
elliwigy said:
maybe they arent using correct permissions when editing the build.prop? what does it need to b set to?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I used root explorer. Mounted the system folder then made the edit. Restarted the phone, installed home and that's it. Works like a charm
Sent from my GT-I9300 using xda premium
After you get it activated you can change the build.prop back to normal and it'll still function just as it should.
The restart fixed it. If only we could use Chat heads for sms now.
Sent from LG Optimus Prime G
---------- Post added at 09:34 AM ---------- Previous post was at 08:52 AM ----------
My chat heads now work for SMS !! This rocks.
I've notice a feature that shows up on the galaxy s3 that doesn't show up on my phone. Notifications for emails and missed calls.
Anyone else not getting these? Also on the s3 after installing it presets the favorites sections of the apps. Not on this.
Sent from my GT-I9300 using Tapatalk 2
tsdeaton said:
I've notice a feature that shows up on the galaxy s3 that doesn't show up on my phone. Notifications for emails and missed calls.
Anyone else not getting these? Also on the s3 after installing it presets the favorites sections of the apps. Not on this.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yea, it doesn't show. I'm surprised the S3 even has those. The non facebook related notifications I've read was just for the htc first.
Stealyourface said:
Yea, it doesn't show. I'm surprised the S3 even has those. The non facebook related notifications I've read was just for the htc first.
Click to expand...
Click to collapse
That's lame of Facebook. The save the best features for the lower spec phones. Its not like others can't support Facebook home they just chose to specifically restrict the app to their favorite phones. That's bad business
Sent from my GT-I9300 using Tapatalk 2
tsdeaton said:
That's lame of Facebook. The save the best features for the lower spec phones. Its not like others can't support Facebook home they just chose to specifically restrict the app to their favorite phones. That's bad business
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
That's business. Go with the most popular phones first. I doubt the OG will ever get support for this. We don't even have sms with messenger. But the N4 does -__-
elliwigy said:
maybe they arent using correct permissions when editing the build.prop? what does it need to b set to?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
you dont need to edit your build prompt at all. i didnt im on lifeless just go to the OP and go to the link and download the rar. unzip, uninstall any and all fb apps on your phone already. restart and instill the apks you just downloaded. enable fb home under settings in the app and your running. this is what i did and iv been running fb home for a whole day and no problems. it will drain your batt faster.
---------- Post added at 01:55 PM ---------- Previous post was at 01:53 PM ----------
Stealyourface said:
Yea, it doesn't show. I'm surprised the S3 even has those. The non facebook related notifications I've read was just for the htc first.
Click to expand...
Click to collapse
yeah this and the batt drain are my only problems with this app. i wish it showed me text msg and missed calls
ruthlessbeatle said:
you dont need to edit your build prompt at all. i didnt im on lifeless just go to the OP and go to the link and download the rar. unzip, uninstall any and all fb apps on your phone already. restart and instill the apks you just downloaded. enable fb home under settings in the app and your running. this is what i did and iv been running fb home for a whole day and no problems. it will drain your batt faster.
---------- Post added at 01:55 PM ---------- Previous post was at 01:53 PM ----------
yeah this and the batt drain are my only problems with this app. i wish it showed me text msg and missed calls
Click to expand...
Click to collapse
Yea but with side loading if Facebook updates Facebook or messenger then those people will have to go through another process for the new updates. At least with a build prop edit we can still easily update through the play store without any issues.
Also to the guy above about SMS and messenger.. we have that.. have even before Facebook home came out. And it should have nothing to do with what phones we have about support on Facebook home. Its like restricting the Facebook app to only galaxy devices or google apps to only nexus devices. Its stupid. I could understand restricting from devices with only a single core. Or making it only for ICS and above. But a specific device...
Edit: with Facebook home I'm pretty sure Facebook will be doing a lot of updating. I would hate to have to search a forum or Google for the latest work apks just for an update.
Sent from my GT-I9300 using Tapatalk 2
12/12/13 Update: The newest version of RecordMyCall (December 7, 2013) seems to work on our Galaxy S3's. Change the the audio source the source to phone.
----------------------------------------------------------------------------------------------------------------------------------------------
Hey guys, i found a working call recording app that records both sides of the call that works on aosp roms. Tested with Ktoonz kernal on illusions, liquidsmooth, slimbean, and cyanogenmod. The app is called "Record My Call" in the play store. https://play.google.com/store/apps/details?id=com.record.my.call&hl=en
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However, i found that only a specific version of the app works with our phone. The version you want to install is Version 5.12.1040 (7 July 2013). You can find this version in the change log page: http://nathanielkh.blogspot.com/2012/11/record-my-call-change-log.html
or you can download below. Up to version 5.14 does sometimes work, but i found 5.12 to always work.
When you open the app, go to Settings, and change to these settings:
Do a quick test by calling yourself if the recording works. At first, the recording will be messed up or you wont hear anything.
What you want to do next is go to Tweaks, and change to these settings:
Do another quick test. By now the recording should be perfect. if it is not, fix permissions, and reboot.
Awesome! Thanks for posting! I know lots o folks will be happy to hear about this!
Do you know if it functions on stock touchwiz? I'll try to test later if you don't know.
Sent from my SCH-I535 using Tapatalk 4
Thanks !!
Is this LEGIT? I'm usually leary about downloading apk files from 3rd party sites/Anything other than the Google Play Store or from a very trusted source here on XDA or other professional websites... I'm not saying that I don't necessarily trust the OP. I'm just very cautious about downloading apk's from places I'm not too sure of...
Thanks!
jsdecker10 said:
Is this LEGIT? I'm usually leary about downloading apk files from 3rd party sites/Anything other than the Google Play Store or from a very trusted source here on XDA or other professional websites... I'm not saying that I don't necessarily trust the OP. I'm just very cautious about downloading apk's from places I'm not too sure of...
Thanks!
Click to expand...
Click to collapse
nm....I just said what the heck, why not? and I went ahead and tried it. To my surprise, IT WORKED THE FIRST TIME. It works great and records both sides of the call. I'm using this on my d2vzw running Liquid 3.0 and kt747 kernel. For the longest time this wasn't supposed to be possible on AOSP roms, but this must apparently be the first! Thank you VERYYY MUCHHH!!
Just fyi, I tried both the attached and the latest versions on stock touchwiz 4.1.2. Neither worked, so looks like its just for cm/aosp type roms.
Sent from my SGH-T999L using Tapatalk 4
DocHoliday77 said:
Just fyi, I tried both the attached and the latest versions on stock touchwiz 4.1.2. Neither worked, so looks like its just for cm/aosp type roms.
Sent from my SGH-T999L using Tapatalk 4
Click to expand...
Click to collapse
You TouchWiz(Samsung) guys are able to record the easy way... If you have Xposed Framework, there's a module made specifically for recording phone calls.
--If you aren't sure what Xposed Framwork is, read this -> Xposed Framework
--It wasn't created with Gingerbread ROMs in mind, but if you're on GB, read up on this -> Xposed Framework back-ported to gingerbread
--Here's ALL KINDS of modules for the Xposed Framework -> Xposed Module Repository
--Annnddddd FINALLY, here's the Recording Module for Xposed Framework! -> Enable Call Recording
That SHOULD get ya started in the right direction if you're on a TW rom. Hope I was able to help ya out! Let us know how things went for ya!
Confirm?
jsdecker10 said:
Is this LEGIT? I'm usually leary about downloading apk files from 3rd party sites/Anything other than the Google Play Store or from a very trusted source here on XDA or other professional websites... I'm not saying that I don't necessarily trust the OP. I'm just very cautious about downloading apk's from places I'm not too sure of...
Thanks!
Click to expand...
Click to collapse
Can anyone else confirm call recorder works on AOSP OS???.
Thanks
PD.I´m try it in slimrom with 4.3 and didn,t work, always grab a 0seconds archive, i,m try install a kt474 kernel but i can´t, any solutions???
I bet it's because you're using a 4.3 Rom. Lots of stuff isn't going to work with those yet. And for something like call recording, don't expect it to any time soon.
Sent from my SGH-T999V using Tapatalk 4
reloadedz said:
Can anyone else confirm call recorder works on AOSP OS???.
Thanks
PD.I´m try it in slimrom with 4.3 and didn,t work, always grab a 0seconds archive, i,m try install a kt474 kernel but i can´t, any solutions???
Click to expand...
Click to collapse
DocHoliday77 said:
I bet it's because you're using a 4.3 Rom. Lots of stuff isn't going to work with those yet. And for something like call recording, don't expect it to any time soon.
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
Actually, when I tested it and I confirmed that IT DID WORK, I was testing it on my Verizon Samsung Galaxy S3 running Liquid 3.0(AOSP 4.3) and the 8/31/2013 KT747 kernel. I followed the OP's directions to a "T" and it worked the very first time and every single time since. I haven't had any problems with it at all. I'm very impressed.
I stand corrected. Thanks! Maybe trying that kernel would get it working for the other guy.
Sent from my SGH-T999V using Tapatalk 4
DocHoliday77 said:
I stand corrected. Thanks! Maybe trying that kernel would get it working for the other guy.
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
I think the problem is with de kernel because i have a i9300 international NOT Verizon or Spring or at&t.
Works on SlimBean 4.3 stock kernel.
Sent from my SGH-T999 using Tapatalk
Fix Permissions
ayeitschris said:
Do another quick test. By now the recording should be perfect. if it is not, fix permissions, and reboot.
Click to expand...
Click to collapse
How do I fix permissions?
I am on slim bean 4.3 stable 2.
installed but it does not record....I get the 0.0 sec and failure msg.
wadado said:
How do I fix permissions?
I am on slim bean 4.3 stable 2.
installed but it does not record....I get the 0.0 sec and failure msg.
Click to expand...
Click to collapse
To fix permissions you need to access Recovery (TWRP/CWM). Do this by...
1. Holding power button briefly until it says reboot, hit reboot and choose recovery. (If you don't see this, shut off your phone and hold volume up, home button and power together while your phone is turning on)
2. Go to Advanced for TWRP (don't know about CM) and hit fix permissions. Reboot.
Sent from my SGH-T999 using Tapatalk
TheLastSidekick said:
To fix permissions you need to access Recovery (TWRP/CWM). Do this by...
1. Holding power button briefly until it says reboot, hit reboot and choose recovery. (If you don't see this, shut off your phone and hold volume up, home button and power together while your phone is turning on)
2. Go to Advanced for TWRP (don't know about CM) and hit fix permissions. Reboot.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I guess I knew this, however using Philz recovery, he canceled the option arguing that it's not relevant.
Meanwhile I resolved.... Uninstalled, found a conflicting app and removed. Reinstalled & walla... It worked.
Sent from my GT-I9300 using XDA Premium 4 mobile app
wadado said:
I guess I knew this, however using Philz recovery, he canceled the option arguing that it's not relevant.
Meanwhile I resolved.... Uninstalled, found a conflicting app and removed. Reinstalled & walla... It worked.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Good to know it worked. But yeah fixing permissions can be very useful at times. Mind telling us what conflicted with it? I'm thinking of getting again.
Sent from my SGH-T999 using Tapatalk
wadado said:
I guess I knew this, however using Philz recovery, he canceled the option arguing that it's not relevant.
Meanwhile I resolved.... Uninstalled, found a conflicting app and removed. Reinstalled & walla... It worked.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Do you use the program for call record on International I9300 or in American 9300 (at&t, verizon....).
In my case, in International 9300 the app doesnt works never.
reloadedz said:
Do you use the program for call record on International I9300 or in American 9300 (at&t, verizon....).
In my case, in International 9300 the app doesnt works never.
Click to expand...
Click to collapse
Well, I have the international.
However, I resolved the problem by installing a previous version that works.
wadado said:
Well, I have the international.
However, I resolved the problem by installing a previous version that works.
Click to expand...
Click to collapse
Sorry, what previous version works??
I I decided to do a little messing around on my phone today. The lack of Swype features on the stock keyboard irritated me. Lol So I was messing with build prop.
First you must be rooted, second get a Build Prop editor, or something like ROM Toolbox, third be sure to make a back up in case you mess something up.
Open your build prop and look for these lines: ime_trace_apply and ime_trace_menu. Tap one to open it up and you'll see Property Value:false and Default Value:false. Click the selection box under Default Value and change it to true. Save and go back into the build prop.
Do the same thing for the next line. So now both of your items (ime_trace_apply and ime_trace_menu) will read True. Be sure to save Build Prop and reboot. Once you do that, try to use the keyboard.
You should see a quick pop up explaining what Trace Input is. If you don't, then check in your setting and make sure you have it checked. That's all there is to it. I'm so much happier with the stock keyboard now.
*Try not to screw up any settings please!*
FYI - I am not responsible for you messing with your Build Prop, screwing up your device, bricking it or Grumpy Cat coming to your front door, to call you a failure.
***Edit - in the example provided, ROM Toolbox Lite was used. ***
Sent from my LG-LS980 using XDA Premium 4 mobile app
Work perfectly
Works great! Now if only I could find a way to unlock the phone... dang sprint not wanting to unlock mine! -_-
Glad it worked for you guys. I actually like the stock keyboard. The lack of Swype irked me though.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Great find!
Sent from my LG-LS980 using XDA Premium 4 mobile app
This worked like a charm. Thanks!
Why would you want this? swiftkey works like a dream, and Google Keyboard also works Wonderfully
maxter5080 said:
Why would you want this? swiftkey works like a dream, and Google Keyboard also works Wonderfully
Click to expand...
Click to collapse
1. Because I like it.
2. Because it has a dedicated Number Row.
3. Because it has built in Emoji's.
Swiftkey is supposed to get #2 and #3 soon, until then...see #1 - #3.
KB112 said:
1. Because I like it.
2. Because it has a dedicated Number Row.
3. Because it has built in Emoji's.
Swiftkey is supposed to get #2 and #3 soon, until then...see #1 - #3.
Click to expand...
Click to collapse
Exactly. ?
Sent from my LG-LS980 using XDA Premium 4 mobile app
This is very cool! Why would they hide this feature?
I also like the dedicated number row... Only complaint is that the space bar is too narrow (I also have that complaint for the swype keyboard).
I've been using Kii - space bar is wider, and it also allows you to backspace after autocorrect to revert to the original word (if you don't want it uncorrected). But I'd switch to stock full time if only the space bar were wider.
Sent from my LG-LS980 using xda app-developers app
I'm looking for the value for the brightness slider in the notification drop down, it might be in the frameworks it self. Actually if you play with the xposed modules it will bring it back but the minute you slide it, it will crash the system UI
Big Boy Laroux said:
This is very cool! Why would they hide this feature?
Click to expand...
Click to collapse
I wonder if they have an agreement with Swype to allow it to be the only tracing keyboard installed by default?
Darth Pooh said:
I'm looking for the value for the brightness slider in the notification drop down, it might be in the frameworks it self. Actually if you play with the xposed modules it will bring it back but the minute you slide it, it will crash the system UI
Click to expand...
Click to collapse
I had this problem too. I ended up using the GravityBar module in Xposed, which happens to have the feature to slide your finger across the statusbar itself to change brightness (under Statusbar tweaks, at the bottom). Works perfectly, no crashes. Not sure if everyone will find this to be an acceptable alternative, though.
Weird cause Swipe was enabled by default on the Verizon model. I actually had to go in and turn it off in the settings.
So funny how the G2 does all these great things yet every version this, this, and that disabled. It would be cool to find a rom that has everything enabled to let US pick and choose what features we want to use.
It's like the AT&T version doesn't have launcher themes. I'm not sure if they even have Keyboard, SMS, or launcher themes. Those are pretty buried too.
player911 said:
Weird cause Swipe was enabled by default on the Verizon model. I actually had to go in and turn it off in the settings.
So funny how the G2 does all these great things yet every version this, this, and that disabled. It would be cool to find a rom that has everything enabled to let US pick and choose what features we want to use.
It's like the AT&T version doesn't have launcher themes. I'm not sure if they even have Keyboard, SMS, or launcher themes. Those are pretty buried too.
Click to expand...
Click to collapse
I am in agreement with you. Give it all to us and let us choose what we want. lol
Does Verizon have group messaging enabled? I'm really irked thats not in the stock messaging app either. I was hoping one of the models had it, I was gonna try to swap messaging apks.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Used this and works great, thx
Sent from my LG-LS980 using xda app-developers app
Omg thank you for posting this! This is a life saver.
KB112 said:
I decided to do a little messing around on my phone today. The lack of Swype features on the stock keyboard irritated me. Lol So I was messing with build prop.
First you must be rooted, second get a Build Prop editor, or something like ROM Toolbox, third be sure to make a back up in case you mess something up.....
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was waiting a bit to see if anyone else reported an issue, because I don't want to come off as a noob . Anyways, I'm using the same Build.prop editor that you are using in your screenshots, but my changes to ime_trace_apply and ime_trace_menu are not saving. I'm rooted, so I'm not sure what's wrong. Any ideas why I can't save? I'm wondering if some other mods are causing conflict....namely: Auto Hide Softkeys, LMT, and G2 Xposed. Thanks in advance!
KB112 said:
I am in agreement with you. Give it all to us and let us choose what we want. lol
Does Verizon have group messaging enabled? I'm really irked thats not in the stock messaging app either. I was hoping one of the models had it, I was gonna try to swap messaging apks.
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes it does. I've group messaged several times.
Except I use Hangouts now for primary messaging... although I found the stock SMS app more feature rich (and has the popup sms). Hangouts just has the AOSP feel to it, plus it keeps my actual hangout chats in one place = 1 less icon on the desktop.
The LG Stock Roms are pretty feature thick, its just hit and miss what each variant has enabled. AT&T disables the Launcher Themes?! Some disable Group Messaging?! Some have a QuickApp Stock Browser that is windowable (Verizon doesn't have this)?!!!! Some have FM Radios?!
Just gimme everything please!
[New Thread Topic]
I'm creating a thread about the Group Messaging. I'll upload a picture and my APK here:
http://forum.xda-developers.com/showthread.php?p=47629560
TumTum101 said:
I was waiting a bit to see if anyone else reported an issue, because I don't want to come off as a noob . Anyways, I'm using the same Build.prop editor that you are using in your screenshots, but my changes to ime_trace_apply and ime_trace_menu are not saving. I'm rooted, so I'm not sure what's wrong. Any ideas why I can't save? I'm wondering if some other mods are causing conflict....namely: Auto Hide Softkeys, LMT, and G2 Xposed. Thanks in advance!
Click to expand...
Click to collapse
You may need to change your system to RW (read/write) as it may be on RO (read only) right now.
player911 said:
Yes it does. I've group messaged several times.
Except I use Hangouts now for primary messaging... although I found the stock SMS app more feature rich (and has the popup sms). Hangouts just has the AOSP feel to it, plus it keeps my actual hangout chats in one place = 1 less icon on the desktop.
The LG Stock Roms are pretty feature thick, its just hit and miss what each variant has enabled. AT&T disables the Launcher Themes?! Some disable Group Messaging?! Some have a QuickApp Stock Browser that is windowable (Verizon doesn't have this)?!!!! Some have FM Radios?!
Just gimme everything please!
[New Thread Topic]
I'm creating a thread about the Group Messaging. I'll upload a picture and my APK here:
http://forum.xda-developers.com/showthread.php?p=47629560
Click to expand...
Click to collapse
Awesome, I'd love to be able get group messaging on stock. I totally agree with you. Weird that each handset has different features enabled or disabled. I guess that's why we have XDA.
Sent from my LG-LS980 using XDA Premium 4 mobile app
First, I am not trying to take credit for this Rom in any kind of way,it is just the smoothest Rom that I have been able to run on my phone, and I would like to share it.
Credit goes where credit is due, so the people that made this possible are tamirda and dr. ketan for this mod http://forum.xda-developers.com/showthread.php?t=2537186 and Lorjay and {Team Rejects} for the stock 4.3 base found here http://forum.xda-developers.com/showthread.php?t=2541395, and always chainfire for root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Rom has everything, wifi hotspot, usb tethering built in
Air Commands, though some don't work because they don't have the sensors
Note 3 apps, and wallpapers, and Pen tools, to help keep you from losing your stylus and some really cool graphics when you use your stylus to unlock the screen.
Really cool features like safety assistance
I mean it has everythingI'm not a developer, this is my first time creating a thread, but this Rom is so awesome and smooth, that I just had to, I am not trying to step on anyone's toes or make anyone mad, but I did put a lot of work into getting this thing to work the way it does, I hope everyone likes it as much as I do, I have been running this for a week now without one problem..
Newest version available, as of 01/09/2014 21:46 and thanks to
JLMANCUSOfor the Aroma Installer and File Hosting!
1-9-13 Credit List and links
ianmb.. created the icons and splash for the aroma installer and
modifed the framework-res.apk's with the air command icons
louforgiveno.. air command icons
kaos420.. increase sound mod http://forum.xda-developers.com/showthread.php?t=2558723
And I would especially like to thank these guys for the support they constantly provide 24/7.
If you have problems or questions, they are addressed or solved almost instantly,
because there is always one of these guys close by to provide the best assistance....
You guys can't be thanked enough!
Download here:
This is THE NEWEST NON-Aroma version
Installing the Full Rom with the new Aroma will format your internal SD, modifying the current install will only wipe Dalvik and Cache,
Newest Stock MK4 with Note 3 Features without Aroma
NON-Aroma Installer v1.3 with working story album widget, etc. feb 8, 2014Smoothest Note 2/3 Rom 1.3 tester
Added transparent widgets (weather, samsung music, and alarm)
Has many new options that sprint/samsung disabled..
sms recieved notification
mms recieved notification
mms read report
wap push menu
Cell Broadcast Menu
Option to reset lockscreen password via google
camera shutter sound menu
enabled camera during call
default camera storage on external sdcard
do not pause music while using camcorder
find my mobile
camera during call
moved bunch of apps/bloat to data/app so each user can remove what they want
added in Shealth
polaris5
quickoffice
Added in google stuff
launcher
calendar
camera
gallery
Aosp keyboard
thanks to
xxbabiboi228xx
working weather lockscreen
fixed Roaming Indicator Off
story album fixed
FOR THOSE WHO CARE THIS ZIP IS SIGNED. FOR THOSE WHO DONT KNOW WHAT THAT MEANS DONT WORRY
Page not found when clicking download link.
Sent from my SPH-L900 using Tapatalk
usarmyaircav said:
Page not found when clicking download link.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Tapped on link...instantly started to download.
Does this need to have mms fixed due to it having the note 3 features?
Congrats on the ROM by the way!
Will flash after dl and give it a test.
Will let you know of any bugs if found.
Sent from my SPH-L900 using Tapatalk
I still get a 404 error. What is the site?
Sent from my SPH-L900 using Tapatalk
usarmyaircav said:
I still get a 404 error. What is the site?
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
I didn't get a site. I just tapped link on phone in op and it started to download.:what:
Sent from my SPH-L900 using Tapatalk
OK guys... flashed and been playing with this a few...
My personal thoughts...
Have to flash Air command icon fix
No biggie...
Mms works, tried to and fro and works.
Wifi works because I updated my Google crap thru Wifi.
Air Command works after fix...before that just text on screen.
Other than that still running this ROM and working on bugs. Just to let you guys know.
Hmm a Tapatalk issue?
Sent from my SPH-L900 using Tapatalk
ianmb said:
Tapped on link...instantly started to download.
Does this need to have mms fixed due to it having the note 3 features?
Congrats on the ROM by the way!
Will flash after dl and give it a test.
Will let you know of any bugs if found.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
I haven't had any mms issues with this, I had some issues when I first installed an earlier version, but I changed some files in the framework, and like I said, this has been my daily driver for 4 or 5 days without any issues at all...i waited until I think i got it perfect before i created this thread, I uploaded about ten versions, but this is the one that works with no issues at all, i did when I flashed this over another rom, but then did a full data wipe and installed it and havent had one issue since....
usarmyaircav, I just uploaded it to my website because its paid for and shouldn't have any limits on downloads, it shouldn't have any, but let me know
ianmb said:
I didn't get a site. I just tapped link on phone in op and it started to download.:what:
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Same here, clicked dl link, I picked opera classic browser & dl started immediately
Sent from my SPH-L900 using Xparent BlueTapatalk 2
I have tried opera, Firefox, Chrome, and dolphin and always get a 404 et
Sent from my SPH-L900 using Tapatalk
usarmyaircav said:
I have tried opera, Firefox, Chrome, and dolphin and always get a 404 et
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
did you try right-clicking and 'save file as'?
are you maybe behind a firewall? The website is my painting company, http://www.yourfavoritepainter.com
http://www.yourfavoritepainter.com/Z New Stock_MK4_w_Note3.zip is the link
if you cant d/l it, let me know; I'm uploading it now to my dropbox and i will pm you a link
Went to xda on browser instead of Tapatalk and clicked on the link and it is downloading now
Sent from my SPH-L900 using Tapatalk
Wow can't wait!! So other than the wifi that needs Odin the kernel is alre included?
Sent from my SPH-L900 using xda premium
Philz recovery?
Sent from my SPH-L900 using xda app-developers app
phonetec said:
Philz recovery?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=48070565
Sent from my SPH-L900 using XDA Premium 4 mobile app
Phil is what I used, I'm sure others work too, I just can't swear by it.
I wish someone would give some feedback, but I guess it means there aren't any problems. ..
Has anyone flashed it yet? If so, what do you think?
Sent from my SPH-L900 using xda app-developers app
So u can only use Philz or can I use TWRP?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Thanks for posting...Trying to check this out but we need to get this on a different server...3hrs estimated on Firefox with 50mbps FiOS.
Need to flash Air command icon fix
Sorry bro flashed right before work synced all Google crap now just starting to play. No air command icons. Will flash the zip for that.
Old TW weather widget I see...OK no biggie. Gonna try mms after icon flash.
ANDROID ...A New Digital Revolution Of Incredible Developers
Mms works
ianmb said:
Need to flash Air command icon fix
Sorry bro flashed right before work synced all Google crap now just starting to play. No air command icons. Will flash the zip for that.
Old TW weather widget I see...OK no biggie. Gonna try mms after icon flash.
ANDROID ...A New Digital Revolution Of Incredible Developers
Click to expand...
Click to collapse
I think air command stuff was in the framework that i had to remove in order for other stuff to work right, but since then I changed a couple other things like SystemUI.apk, because a few things kept crashing, maybe that was the problem and I can put the air command back in. I guess I was just happy that it went so long without any errors.
For everyone having troubles downloading, I wish I knew of a better place to post it, or how to share it as a torrent, that is always the fastest way to download I've been told. I'm checking into other ways to post it.
I have been trying to get Air Gestures to work to no avail, it just wont boot with those framework files at all
There is a really cool ink effect on the lock screen, when you touch the stylus to the lock screen, and you can change ink colors in settings
Like the rom the thing I miss is next launcher won't work with it I installed it several times and it forces close.. The wifi worked off the bat no need to Odin wifi fix for me
Sent from my SPH-L900 using xda premium