Hi dear xda Friends;
I have a HTC Incredible 2, is stuck on HTC white screen;
Bootloader (Unlocked)
VIVO_W XB SHIP S-ON RL
HBOOT-0.98.0000
RADIO-1.09.01.0312
eMMC-Boot
When i try to load the PG32IMG nothing happen, and when I'm trying to do it in recovery mod, its says can not open sdcard/PG32IMG.zip (bad) installation aborted.
I Downloaded different RUU but always get error 155
I tryed different PG32IMG files downloaded from many sides and did not work, i was Able to put the Superuser files on the root of sd card and flash it them install it but when i reboot bootloader is still S-ON, i do have much knowledge on android devices, but is all the information I can provide them if anyone can help me Solve this problem I'll be very grateful.
owenblack said:
Hi dear xda Friends;
I have a HTC Incredible 2, is stuck on HTC white screen;
Bootloader (Unlocked)
VIVO_W XB SHIP S-ON RL
HBOOT-0.98.0000
RADIO-1.09.01.0312
eMMC-Boot
When i try to load the PG32IMG nothing happen, and when I'm trying to do it in recovery mod, its says can not open sdcard/PG32IMG.zip (bad) installation aborted.
I Downloaded different RUU but always get error 155
I tryed different PG32IMG files downloaded from many sides and did not work, i was Able to put the Superuser files on the root of sd card and flash it them install it but when i reboot bootloader is still S-ON, i do have much knowledge on android devices, but is all the information I can provide them if anyone can help me Solve this problem I'll be very grateful.
Click to expand...
Click to collapse
you are just htcdev unlocked. look in the development forum. should be second or third from the top ecplains rooting and how to get s off afrwe htcdev
No service Radio
FordNate said:
you are just htcdev unlocked. look in the development forum. should be second or third from the top ecplains rooting and how to get s off afrwe htcdev
Click to expand...
Click to collapse
I did everything to be s-off, I used revolutionary I download more than 5 custom ROM and it turns out that now the Cellphone doesn't recognize the radio, I mean the SIMcard and CDMA, No service is the message for every ROM, I decide to Install the original RUU, but still be the same issue.
I don't know what to now,
Note: before set s-off I unlock the phone.
HTC Dind2
jjdelarosa said:
I did everything to be s-off, I used revolutionary I download more than 5 custom ROM and it turns out that now the Cellphone doesn't recognize the radio, I mean the SIMcard and CDMA, No service is the message for every ROM, I decide to Install the original RUU, but still be the same issue.
I don't know what to now,
Note: before set s-off I unlock the phone.
HTC Dind2
Click to expand...
Click to collapse
Did you try updating the firmware? Wich one are you on?
Sent from my ADR6350 using xda app-developers app
Well tell one... Because I have installed a lot. But now my issus is now the data connection APN of the phone doesn't work. Im GSM.
Sent from my ADR6350 using XDA Premium 4 mobile app
download this
you are s-off now right? download this file http://d-h.st/ORc md5:ea6b98be48210d7797e62362f49ff751
this is the stock radio (6.xxxx) rename it to PG32IMG and put the zip file on your sd card boot into bootloader (hold power+vol- when device is off) and when it ask you to upgrade select yes using volume keys.
DO not interrupt the process in any way after it has started
this should address your problem if not then try this one it will upgrade your firmware and will flash the 0320 radio
http://d-h.st/ZVq MD5: 81171966d46efcc62b6c8f28918b0b31
CHECK THE MD5 BEFOR FLASHING!
md5 checker: http://d-h.st/SCt
best of luck
Yes I'm s-off.. OK I will do it and let you know thanks.
Sent from my ADR6350 using XDA Premium 4 mobile app
unlock your devices
unlock your devices and get more details from development- thread.
kevicwe said:
unlock your devices and get more details from development- thread.
Click to expand...
Click to collapse
I'm unlock. I have search on the development section, I will do the last suggestion I have received, I haven't done yet, because I was working and busy..
Thanks.
jjdelarosa said:
I'm unlock. I have search on the development section, I will do the last suggestion I have received, I haven't done yet, because I was working and busy..
Thanks.
Click to expand...
Click to collapse
HI again... I'm running CM9 Global, but when I set the APN, the cellphone crashed.. I lost the signal and put no service again. So I have to re-install the ROM again. I just looking for a GSM ROM and work with APN property.
I installed CM 7.2, with this ROM, My cellphone get other IMEI and Get no services, I don't know why... If anyone knows a GSM with APN's ROM, I'll appreciate, If I have to donate, I will.
jjdelarosa said:
HI again... I'm running CM9 Global, but when I set the APN, the cellphone crashed.. I lost the signal and put no service again. So I have to re-install the ROM again. I just looking for a GSM ROM and work with APN property.
I installed CM 7.2, with this ROM, My cellphone get other IMEI and Get no services, I don't know why... If anyone knows a GSM with APN's ROM, I'll appreciate, If I have to donate, I will.
Click to expand...
Click to collapse
you can try viper rom it has working gsm and apn (apn is set automatically) just select gsm during install if gsm doesn't work then refer to this guide http://forum.xda-developers.com/showthread.php?t=2346468
good luck
Thanks I will and let you know.
Sent from my ADR6350 using XDA Premium 4 mobile app
Guys thanks a lot... Viper 1.3 was my salvation.. Everything works perfect APN, Camera.. All.
Sent from my ADR6350 using XDA Premium 4 mobile app
jjdelarosa said:
Guys thanks a lot... Viper 1.3 was my salvation.. Everything works perfect APN, Camera.. All.
Sent from my ADR6350 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
glad you are all sorted out
S3C driver is not present
Hi Arsalan,
Every time I load application USB Host controller, I get the message " s3c driver is not present>, so SD card is not accessing, pc link also not detecting. Please help.
S-OFF, REVOLUTIONARY
HBOOT. 6.13.1002
ANDROID 2.2.1.
farooq4u said:
Hi Arsalan,
Every time I load application USB Host controller, I get the message " s3c driver is not present>, so SD card is not accessing, pc link also not detecting. Please help.
S-OFF, REVOLUTIONARY
HBOOT. 6.13.1002
ANDROID 2.2.1.
Click to expand...
Click to collapse
did you install drivers on your pc?? download and install these http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
S3C driver is absent, SD CARD is not mounting
ArslanQureshi said:
did you install drivers on your pc?? download and install these
I installed the above drivers. But result is same.
Well Arsalan, it is long story. I will try to make it short.
To use custom ROM, I downgraded the HBOOT from 0.98 to 0.97, run Revolutionary and got S-OFF.
Installed CWM recvoery. Installed super user.
I installed a custom ROM thru recover, cm-10-20121003-UNOFFICIAL-vivow. The ROM installed well.
But it was not working on cellular netwrok. I searched the XDA and found the following file
I727UCMC1, flashed thru recovery and the problem started.
Since, then rebooting loop started. When I try to start recovery, it is not loading. After many attempts,
once started, but not showing SD card. But his SD card is loading during Bootloader. Can also run
PG32IMG file if proper one.
Since, SD card is not mounting, I tried to flash thru new ROM by HBOOT. But all is vain.
Then, to get back phone in working condition, I searched for STOCK ROM. Downloaded the following
RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.4_Radio_1.09.01.0622_NV_VZW1.92_release_200325_signed
RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_5.10.605.9_Radio_1.09.01.1111_NV_VZW1.92_release_225831_signed
RUU_Vivo_W_VERIZON_WWE_1.34.605.4_Radio_0.99.01.0225_2_NV_VZW1.92_release_182876_signed
I tired each one, The last one with installed when run the file from PC and phone was in FASTBOOT USB mode. It is now
2.2.1. The phone came with 2.3.4. It is now on older version.
There are still problems,
i) SD CARD is not showing,
ii) When restart, goes back to rebooting loop with white screen and HTC logo.
III) When start in HBOOT, still not loading recovery.
When I installed USB HOST CONTROLLER, it says following,
S3C USB Host driver NOT founded,
Root hub is not present, USB Host mode not active or not available.
So, phone camera is not working due to SD card, phone is not connecting to PC due to USB Host driver.
Please help, Thank you very much for your support.
Click to expand...
Click to collapse
farooq4u said:
ArslanQureshi said:
did you install drivers on your pc?? download and install these
I installed the above drivers. But result is same.
Well Arsalan, it is long story. I will try to make it short.
To use custom ROM, I downgraded the HBOOT from 0.98 to 0.97, run Revolutionary and got S-OFF.
Installed CWM recvoery. Installed super user.
I installed a custom ROM thru recover, cm-10-20121003-UNOFFICIAL-vivow. The ROM installed well.
But it was not working on cellular netwrok. I searched the XDA and found the following file
I727UCMC1, flashed thru recovery and the problem started.
Since, then rebooting loop started. When I try to start recovery, it is not loading. After many attempts,
once started, but not showing SD card. But his SD card is loading during Bootloader. Can also run
PG32IMG file if proper one.
Since, SD card is not mounting, I tried to flash thru new ROM by HBOOT. But all is vain.
Then, to get back phone in working condition, I searched for STOCK ROM. Downloaded the following
RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.4_Radio_1.09.01.0622_NV_VZW1.92_release_200325_signed
RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_5.10.605.9_Radio_1.09.01.1111_NV_VZW1.92_release_225831_signed
RUU_Vivo_W_VERIZON_WWE_1.34.605.4_Radio_0.99.01.0225_2_NV_VZW1.92_release_182876_signed
I tired each one, The last one with installed when run the file from PC and phone was in FASTBOOT USB mode. It is now
2.2.1. The phone came with 2.3.4. It is now on older version.
There are still problems,
i) SD CARD is not showing,
ii) When restart, goes back to rebooting loop with white screen and HTC logo.
III) When start in HBOOT, still not loading recovery.
When I installed USB HOST CONTROLLER, it says following,
S3C USB Host driver NOT founded,
Root hub is not present, USB Host mode not active or not available.
So, phone camera is not working due to SD card, phone is not connecting to PC due to USB Host driver.
Please help, Thank you very much for your support.
Click to expand...
Click to collapse
you shouldn't have flashed I727UCMC1 its the radio for another device it could have bricked your device all I can suggest you is to plug your device to pc boot into fastboot and run this http://www.androidruu.com/getdownlo....01.1111_NV_VZW1.92_release_225831_signed.exe it is a complete ruu and will flash radio recovery and stock 2.3.3 rom after you do this then contact me for roms you should flash
Click to expand...
Click to collapse
ArslanQureshi said:
farooq4u said:
you shouldn't have flashed I727UCMC1 its the radio for another device it could have bricked your device all I can suggest you is to plug your device to pc boot into fastboot and run this RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_5.10.605.9_Radio_1.09.01.1111_NV_VZW1.92_release_225831_signed.exe it is a complete Ruu and will flash radio recovery and stock 2.3.3 rom after you do this then contact me for roms you should flash
Click to expand...
Click to collapse
I am trying to download it, but unsuccessful this now. Still trying. Server disconnect very frequently, also speed is very low.
Click to expand...
Click to collapse
farooq4u said:
ArslanQureshi said:
I am trying to download it, but unsuccessful this now. Still trying. Server disconnect very frequently, also speed is very low.
Click to expand...
Click to collapse
I installed it thru fasboot usb, it installed correctly without any error. But, the phone is still in bootloop. Original Rom did not load. I tried again the FROYO 2.2.1, it loaded and system is up now. But, the same problem, no SD CARD and not computer connectivity.
Click to expand...
Click to collapse
Related
Are there ways to root using fastboot? Have usb brick but working fastboot, and guide using android emulatro doesnt work. Have latest RUU with 0.93 hboot
Have you tried running an RUU from HTC? They completely restore your phone to how it was, and your device only needs to be turned on on the bootloader screen for it to work. (power up with volume down pressed)
Note that this wil completely wipe the phone's internal memory. (though not the sd card)
You can find the RUUs here. If you have an unbranded device (meaning it wasn't customized by the carrier), this is probably the one you're looking for.
Remember: if the device powers on, it isn't bricked!
That post of RUUs is VERY old, here's the site which has them all...
http://shipped-roms.com/index.php?category=android&model=Bravo
It was rooted originally with oxygen. When brick, I used downgrade tool, pimg.img zip from sdcard in hope for it to fix itself. Installed upgrades from htc to froyo. No luck
but if possible to push ruu using fastboot I will try it. Strange thing, it will only charge if rebooting via fastboot, and its then detected as in need of qualcomm drivers.. no luck finding working drivers to that.. Haven't found similar case in any forums. ideas?
Blubba10 said:
It was rooted originally with oxygen. When brick, I used downgrade tool, pimg.img zip from sdcard in hope for it to fix itself. Installed upgrades from htc to froyo. No luck
but if possible to push ruu using fastboot I will try it. Strange thing, it will only charge if rebooting via fastboot, and its then detected as in need of qualcomm drivers.. no luck finding working drivers to that.. Haven't found similar case in any forums. ideas?
Click to expand...
Click to collapse
For drivers you should install htc sync.
I know, but it doesn't take.. Thanks for hint though
Update. When I tried to run RUU in windows I only get 170 connection error, also in fastboot mode. Found it as PB99IMG file and ran it through SDcard, but it didnt fix usb problem.. Is there a difference between those two methods when i comes to degree of restoring? Dont think so, anyway..
I'm not entirely sure, but you can try this: when the device's powered on and connected in bootloader mode, go into the Device Manager, and find your phone in the list. Right click and choose the option to install a new driver (I don't know the exact function name in English, my system's locale is Dutch). Then, go to the screen where you can select a driver. Select HTC in the vendor list and install the driver. That should fix your 170 error.
If that doesn't work, try this, and optionally the above again.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/ download zip from here and flash from recovery after renaming it update.zip
Blubba10 said:
Update. When I tried to run RUU in windows I only get 170 connection error, also in fastboot mode. Found it as PB99IMG file and ran it through SDcard, but it didnt fix usb problem.. Is there a difference between those two methods when i comes to degree of restoring? Dont think so, anyway..
Click to expand...
Click to collapse
Big thanks, but I´ve sent it in for repair. Hope to get in on garantee, but if not, I will just get it returned and try it out..
You need root for that though which he (and me) probably has not.
No, you don't. You can flash update.zip through the stock recovery.
Do you have access to that?
Sent from my HTC Desire using XDA App
I've never had to do a usb-brick fix, but from what I understand, you should have root to flash that particular "update.zip", because otherwise you'll end up with a sig ver error or some sort of that.
As said in the first step "1. Follow this r5 rooting guide to do Step 1 of the rooting.That will give you a basic ROM to work with, with root capability."
The reason I think you need to flash it as an "update.zip" file is because the r5 method in itself does not flash a custom recovery (from which you can flash files without regard to the name).
3722 said:
I've never had to do a usb-brick fix, but from what I understand, you should have root to flash that particular "update.zip", because otherwise you'll end up with a sig ver error or some sort of that.
As said in the first step "1. Follow this r5 rooting guide to do Step 1 of the rooting.That will give you a basic ROM to work with, with root capability."
The reason I think you need to flash it as an "update.zip" file is because the r5 method in itself does not flash a custom recovery (from which you can flash files without regard to the name).
Click to expand...
Click to collapse
Yup...And now we need 10chars.
I eneed up using rageagainstthecage method to apply usb fix.. Only way wich worked..
Sent from my HTC Desire using XDA App
Hi everybody,
I have an S-Off HTC Desire running LeeDroid 2.3d. I've also flashed Clockwork Recovery 3.0.0.5 as the default recovery for the phone. I have been using an 8GB microSD until I got a 16GB today. I pulled the 8GB out and inserted the 16GB into the phone. However, once i put the 16GB inside the phone, it would no longer boot. The phone no longer boots up into the ROM, and it doesn't boot into Recovery mode as well; it just remains at the white HTC screen. Basically, I can only get into the Bootloader and Fastboot. Does anyone know what might be wrong and how I could fix this? Thanks a lot in advance!!
EDIT: I have since tried flashing different recoveries through Fastboot, but to no avail.
Come on guys I would REALLY appreciate if anyone could help me out with this =)
It boots up with the old 8 GB card?
If yes, you have to partition the new card for the custom ROM and reflash the ROM or restore a nandroid backup.
Sent from my customized HTC Desire using TTP
No, the phone does not boot up even with the old 8GB card. It's the same issue as with the 16GB card.
Do you guys think it would help at all if I tried to remove S-off from the device? I'm getting pretty desperate for ideas so any help is greatly appreciated.
Would anyone know how to remove S-off? Correct me if I'm wrong, but I believe I need the PB99IMG.zip file that downgrades the HBOOT from 0.93.1 down to 0.80 (or any other version would probably do). Is this correct? Does anyone have the file they could link me to? Thanks!
Delete please :/
Sent from my ZX Spectrum +2 using 128k BASIC
scatterface said:
Delete please :/
Sent from my ZX Spectrum +2 using 128k BASIC
Click to expand...
Click to collapse
???? Why??
Does it boot with no sdcard in?
Sent from my HTC Desire using Tapatalk
No, it does not boot at all. I've tried with an SD, without an SD. Even without a SIM
I would suggest running the RUU for your original rom, or one of the WWE ones. This will put your phone back to stock, no root, no s-off.
All of your data will also be wiped.
Sent from my HTC Desire using Tapatalk
mikep99 said:
I would suggest running the RUU for your original rom, or one of the WWE ones. This will put your phone back to stock, no root, no s-off.
All of your data will also be wiped.
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I'm sorry but I'm not sure how to do that. Can I do that even though I have no access to Recovery mode? If you could give me some instructions and point me in the direction of the file, that would be great!
You can do this if you can get into fastboot.
What are your original rom details? And was your phone branded/which carrier/which country etc..
The more details the better
Sent from my HTC Desire using Tapatalk
Originally, my phone was from Hong Kong. I didn't buy it with a carrier, it was from an electronics store. So basically, it was unbranded and unlocked when I first got it.
Also, I'm really not sure how to do this through Fastboot, or even where to get the files... So yah... Sorry if I'm such an idiot lol
One more thing. I'm not sure if this is relevant but I don't have a goldcard.
OK, short and bundled for you. This is only a guidance list, you'll have to get the details yourself with your google-fu.
- get the android SDK. You'll get adb and fastboot with it.
- install the adb drivers.
- once you got that try "fastboot devices" in your windows command shell.
- it shows your device? OK, you did everything correctly.
- get to flash whatever you like by downloading an img file and flashing it with "fastboot <target location> <img-filename>
Cheers.
Ok another possibly stupid question. I've gone on this link: http://forum.xda-developers.com/showthread.php?t=695667 and have downloaded one of the GSM WWE files. However, it's a .exe file. What do I do with that? I was under the impression that Fastboot only works with .img files? Also, what is the difference between the GSM WWE and the GSM URL files?
I have tried following some instructions I found off Google. It told me to run the RUU .exe file and extract the rom.zip file from it. I did this, renamed it to PB99IMG.zip, put it onto my SD, and tried to flash it via the Bootloader. However, I am given a message saying the CID is incorrect. I'm guessing this might be because I don't have a GoldCard? All in all, my phone is still not fixed, and I'm really hoping someone could help me out (i.e., give me some instructions as to how to flash the RUU .exe file through Fastboot).
Remove the PB99IMG.zip file from the sd card.
Turn off the phone.
Hold down back and the power button.
You should now be in the fastboot menu.
Plug the phone into your computer with usb. It should now say 'fastboot usb' instead of 'fastboot' on the phone.
Then run the RUU exe file on your computer and follow the instructions on the screen of your computer. It will install the rom automatically.
I had this problem at the weekend and couldn't fix it. Phone went off to HTC who have sent it back after fixing, I don't know what they did though because I missed the delivery of my phone back today
http://forum.xda-developers.com/showthread.php?t=951950
The error message indicates you need a goldcard to flash the WWE ROM.
have you checked if one of the Asian ones can be applied without a goldcard.
http://shipped-roms.com/index.php?category=android&model=Bravo
Sent from my HTC Desire using Tapatalk
kino1122 said:
Do you guys think it would help at all if I tried to remove S-off from the device? I'm getting pretty desperate for ideas so any help is greatly appreciated.
Would anyone know how to remove S-off? Correct me if I'm wrong, but I believe I need the PB99IMG.zip file that downgrades the HBOOT from 0.93.1 down to 0.80 (or any other version would probably do). Is this correct? Does anyone have the file they could link me to? Thanks!
Click to expand...
Click to collapse
The Downgrade of the Bootloader only works if you are running a device that can actually boot up fully. Download this RRU, put your phone into Fastboot via the Bootloader menu, connect your phone to the computer whilst in Fastboot, you should see the Red Fastboot writing change to Fastboot USB Plug, when you see this run the RRU you downloaded, and you're device should be restored to Factory Default with the latest version of Froyo. You WILL loose all data and root and S-Off, but this is the only thing I can think of to fix your device mate hope I helped...
*Sorry, I just realised someone had posted a similar tutorial, I only read the first page of the thread, didn't realise there was a second. You don't need the AndroidSDK, if you have HTC Sync installed, then all the drivers should automatically be there, but when you run the RRU, just make sure that you close HTC Sync (it'll appear in the taskbar on Windows) as it thinks the device is syncing, and can occasionally cause problems.
YES!!!! You guys are amazing! I managed to find my old GoldCard and flashed the RUU jaaystott posted. The phone now boots up and everything is in perfect working order. I'll be sure to thank everyone for their help!
Hi,
I was trying to root my phone with the guide that is on this forum, but then when i restarted my phone, it was stuck on the white "HTC" boot screen. Then i tried to do a "Factory Reset" in hboot and rebooted, and still stuck on the boot screen. I tried to put a PD98IMG.zip as it was prompted in hboot as "no image or wrong file", so i loaded PD98IMG.zip onto my SD card, and still not working. any suggestions ?
my phone is S-ON.
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Mine took 30 mins to boot once. You could try the ruu look in dev section, you just flash it from Windows, then start again. Was your she branded?
Sent from my Desire HD using XDA App
Howling Wolf said:
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Click to expand...
Click to collapse
<-- This
I was in the same situation, downgraded ROM and clockwork mod and did a restore and it works fine now
@Howling Wolf - I cannot get the CID for the SD card, because
in the 'adb shell' command, my command prompt says "error: device not found". But i want to know, can i still get the CID through another HTC desire phone ? and can i still update a stock rom with S-ON ? and how do i know if my phone is branded ?
I got my phone from Taiwan, a friend brought it over for me, and when i last checked it was on software version 1.37.921.1 .
@turbo_d - ill try that thnx
did you try installing the htc sync software then do adb devices
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Totoro_tw said:
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Click to expand...
Click to collapse
Try going into bootloader, and then run adb from pc..
@SAPPH1RE - i tried that but thanks for the help !
ok i acquired my CID through linux, but now its telling me
main version is older !
update fail.
any suggiestions ? my current software version of the phone is 1.37, which stock RUU should i be using ?
If you are on 1.37 you should be fine to continue with getting s-off and such. You don't need to upgrade or downgrade your ROM until you achieve s-off. And then you should upgrade to a custom ROM such as LeeDroid.
Sent from my Desire HD using XDA App
did you get it working ?
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Thing is, i cant get my phone to start up, so i need to flash a stock rom, so that i can get my phone started and then do S-OFF. But it keeps telling me "Main Version is older!"
ive tried 2 roms already, 1.32 and 1.72 RUU. What could be the problem ?
thnx problem solved, the gold card wasnt done properly, so i re did everything.
thnx for the help guys !
paulcoop007 said:
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Click to expand...
Click to collapse
@paulcoop007 i have same problem with you, same version with your phone and S-ON. and my phone at black screen with htc. how can i fix it. can you explain how did you fix your phone?
Hi
I have an HTC Desire running oxygen. I tried downloading the RUU for the stock rom and running it. It partially completed buy then it could no longer be recognised. Is there anyway I can get this back to a stock rom. My SD card broke and I dont have the original backup.
Please help if you can.
Kind Regards
Adam
Bootloader info please as usually.
What RUU did you try flash?
What was the eroor message?
Is the phone branded? etc, etc etc...
I just about managed to instal oxygen and am quite new to all this so apologies if I sound like a noob.
I dont know how to check the bootloader.
I tried RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704
It says "Updating Signature" and then comes up with "ERROR [131]:CUSTOM ER ID ERROR".
The phone is unbranded and came unlocked.
Thanks so much for the reply
Bootloader is 0.93.0001
use a recent ruu and not a jurassic one
try with wwe 2.29.405.5
even if CID error mean probably ur phone is branded..but worth a try with the above ruu
ensure the phone is full charged, and when running the ruu dont pull battery or unplug the cable
if ur phone is working with oxygen now, then there is no need to run the ruu
Hi
Thanks for the reply. The phone is definitely unbranded and unlocked.
Tried that RUU and it doesnt even recognise the phone as an Android device. Tried unplugging an plugging back in and it still doesnt recognise it.
agarciavalino said:
Hi
Thanks for the reply. The phone is definitely unbranded and unlocked.
Tried that RUU and it doesnt even recognise the phone as an Android device. Tried unplugging an plugging back in and it still doesnt recognise it.
Click to expand...
Click to collapse
well its not the ruu that doesn't recognize ur phone..
its ur pc that doesn't recognize it..is it? u can still access the sdcard content from ur computer?
if ur pc does not recognize it (even with the right drivers up and running), then u have an USB brick..search for a guide (if that the case)
My phone shows up as an Android Device and once i have opened that it says My HTC. I dont have an sd card in my phone. When I connect the phone nothing comes up on the device. However it does show on the pc. The other RUU recognised the phone. This one just doesnt seem to want to.
agarciavalino said:
My phone shows up as an Android Device and once i have opened that it says My HTC. I dont have an sd card in my phone. When I connect the phone nothing comes up on the device. However it does show on the pc. The other RUU recognised the phone. This one just doesnt seem to want to.
Click to expand...
Click to collapse
thats strange..reboot the phone..reboot the pc..already tried? ensure is not a corrupted ruu download..
I have downloaded the most recent RUU again and it made no difference. I have rebooted each device many times. I know. I worry that I have screwed the phone. I dont understand why the first one fails at the signature stage. If i could at least make that work I could do the OTA updates
Do you have the drivers installed (worth a shot).
Also boot into fastboot mode -
1. Power off device
2. Boot into bootloader (holding Power + Vol Down)
3. Choose fastboot
If your USB is ok, then the fastboot line should change to fastboot usb.
Then run the RUU.
Just tried the rom before (RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed). Recognised the phone, started running and failed again on the Updating signature part.
agarciavalino said:
Just tried the rom before (RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed). Recognised the phone, started running and failed again on the Updating signature part.
Click to expand...
Click to collapse
CID error? then ur phone is branded i think
Tried your steps and the phone did change to fastboot USB. It started running fine and then failed on the updating signature part. I also do have the drivers installed.
Also I dont know if clockword is affecting it either. Absolutely nothing when I tried and dind similar situations to me.
What was the exact error(With Number)? CID? As andQlimax says?
Wait, you have clockworkmod working and running?
The exact error i have is "ERROR [131]:CUSTOMER ID ERROR".
Also I can go into recovery and it takes me to clockworkmod recovery v2.5.0.7
Well CID error definitely states you have a branded phone and you need a different RUU.
However, if you have a working clockworkmod recovery why don't you flash a custom ROM?
agarciavalino said:
The exact error i have is "ERROR [131]:CUSTOMER ID ERROR".
Click to expand...
Click to collapse
ur phone is branded..u need the correct ruu by ur operator
agarciavalino said:
Also I can go into recovery and it takes me to clockworkmod recovery v2.5.0.7
Click to expand...
Click to collapse
if ur clockworkmod works, and ur oxygen rom works too..why u need an ruu?
I have got oxygen working well again. Thing is I am selling it as have just got a SGS2. I thought it would be better to sell it with the stock rom. Now it working again on oxygen how should I go about getting it back to stock. As though I was trying for the first time. Thanks for all your helps guys.
PS I have used this phone on O2, Orange and Vodafone. Also there is no branding on the device. The packaging is also unbranded. Its an SLCD version. Dont know if that makes a difference
I have an Desire Bravo.
I used AlphaRev to S-OFF and Unrevoked to root the phone.
I then installed Cyanogenmod 7
All went OK until I realised that the phone was locked to Orange.
I've tried just about everything I can find on the net.
Here are the details when I boot up:
BRAVO PVY4 SHIP S-OFF
HBOOT 0.93.0001
MICROP 051d
Radio 5.17.05.23
Things I have tried.
Updated radio to above.
Flash PB99IMG and PB99IMG_cm7r2
Get CID incorrect
Installed HTC Sync and ran RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
(not sure if this works with S-OFF)
HTC Sync and the RUU do not see the phone.
Any ideas?
TIA
Wait, so what are you trying to do? Flash a RUU?
To flash a RUU, you either use a goldcard, or install the 2.3 RUU, which is unbranded.
Or are you trying to unlock your phone? Here:
http://forum.xda-developers.com/showthread.php?t=943726
abaaaabbbb63 said:
Wait, so what are you trying to do? Flash a RUU?
To flash a RUU, you either use a goldcard, or install the 2.3 RUU, which is unbranded.
Or are you trying to unlock your phone? Here:
http://forum.xda-developers.com/showthread.php?t=943726
Click to expand...
Click to collapse
I paid for an unlock code in the hope that it might work. I can enter the code, which is accepted, but this happens each time the phone is started. And no network available.
I tried the unlock method you mentioned but I get an error when running it. Sieempi has not replied to my request for help, so I think this a a deadend.
The idea is to get the phone back to a stock rom so that I can unlock the phone using the code I purchased.
I didn't think you could make a goldcard for a phone that is running cyanogenmod. Is that true? A link would be appreciated.
Is the RUU I tried unbranded? Where can I get the 2.3 RUU for my phone? OK found the location if this. I'll give it a try.
Thanks very much for the quick reply.
I've downloaded 2.3 RUU but cannot install kernel manager on the phone because I don't have access to the market.
Can't find where to get APK from without having to install crapware.
I've installed kernel manager on my other phone but can't find the apk file. Dev Tools says it's in /data/data but that is just an xml file
Something is conspiring against me
andrewedmondson said:
I've downloaded 2.3 RUU but cannot install kernel manager on the phone because I don't have access to the market.
Can't find where to get APK from without having to install crapware.
I've installed kernel manager on my other phone but can't find the apk file. Dev Tools says it's in /data/data but that is just an xml file
Something is conspiring against me
Click to expand...
Click to collapse
You are conspiring against yourself. Stop complicating matters. When trying sieempi's method, make sure you are on stock and with stock hboot.
Sent from my HTC One X
cronus101 said:
You are conspiring against yourself. Stop complicating matters. When trying sieempi's method, make sure you are on stock and with stock hboot.
Sent from my HTC One X
Click to expand...
Click to collapse
I'm working on getting stock back.
Strangely, the 2.3 RUU program is now recognising the phone, whereas it didn't before. Just waiting for phone to charge up to install it.
UPDATE: Finally got stock rom back. Looked like magic when the HTC logo appeared. And the unlock code I bought worked too. Now I am going to install Cyanogenmod all over again. I'll reply when I have it all working. I'm still not sure why the previous RUU and HTC Sync didn't recognise the phone earlier.
Thanks for the help!
andrewedmondson said:
I'm working on getting stock back.
Strangely, the 2.3 RUU program is now recognising the phone, whereas it didn't before. Just waiting for phone to charge up to install it.
UPDATE: Finally got stock rom back. Looked like magic when the HTC logo appeared. And the unlock code I bought worked too. Now I am going to install Cyanogenmod all over again. I'll reply when I have it all working. I'm still not sure why the previous RUU and HTC Sync didn't recognise the phone earlier.
Thanks for the help!
Click to expand...
Click to collapse
OK, so I have the 2,3 RUU stock rom working. But Unrevoked 3.32 latest version gives me an error: firmware too new.
I don't think this happened before.
I've looked at quite a few posts to solve this but have not managed to yet.
Use revolutionary.
abaaaabbbb63 said:
Use revolutionary.
Click to expand...
Click to collapse
OK trying to do that now.
UPDATE: Revolutionary worked inasmuch as it gives me root access.
I then used CWM to flash cyanogenmod, as before (the same file). But every time I start the phone, the cyanogen welcome screen keeps refreshing every 3 or 4 seconds.
FINAL UPDATE: forgot to clear cache and wipe memory first. Duh!
Once simple mistake (not unlocking phone before rooting) and many hours later ...
Thanks once again. Everything working. Nice to have a backup phone.
andrewedmondson said:
OK trying to do that now.
UPDATE: Revolutionary worked inasmuch as it gives me root access.
I then used CWM to flash cyanogenmod, as before (the same file). But every time I start the phone, the cyanogen welcome screen keeps refreshing every 3 or 4 seconds.
FINAL UPDATE: forgot to clear cache and wipe memory first. Duh!
Once simple mistake (not unlocking phone before rooting) and many hours later ...
Thanks once again. Everything working. Nice to have a backup phone.
Click to expand...
Click to collapse
Just one last problem that I didn't spot.
I flashed the latest gapps in Recovery but I cannot see any new app
SOLVED this problem. I was using the newtalk version of gapps. This doesn't work. Use the other version here:
http://goo.im/gapps/gapps-gb-20110828-signed.zip