[Q] Root via fastboot? - Desire Q&A, Help & Troubleshooting

Are there ways to root using fastboot? Have usb brick but working fastboot, and guide using android emulatro doesnt work. Have latest RUU with 0.93 hboot

Have you tried running an RUU from HTC? They completely restore your phone to how it was, and your device only needs to be turned on on the bootloader screen for it to work. (power up with volume down pressed)
Note that this wil completely wipe the phone's internal memory. (though not the sd card)
You can find the RUUs here. If you have an unbranded device (meaning it wasn't customized by the carrier), this is probably the one you're looking for.
Remember: if the device powers on, it isn't bricked!

That post of RUUs is VERY old, here's the site which has them all...
http://shipped-roms.com/index.php?category=android&model=Bravo

It was rooted originally with oxygen. When brick, I used downgrade tool, pimg.img zip from sdcard in hope for it to fix itself. Installed upgrades from htc to froyo. No luck
but if possible to push ruu using fastboot I will try it. Strange thing, it will only charge if rebooting via fastboot, and its then detected as in need of qualcomm drivers.. no luck finding working drivers to that.. Haven't found similar case in any forums. ideas?

Blubba10 said:
It was rooted originally with oxygen. When brick, I used downgrade tool, pimg.img zip from sdcard in hope for it to fix itself. Installed upgrades from htc to froyo. No luck
but if possible to push ruu using fastboot I will try it. Strange thing, it will only charge if rebooting via fastboot, and its then detected as in need of qualcomm drivers.. no luck finding working drivers to that.. Haven't found similar case in any forums. ideas?
Click to expand...
Click to collapse
For drivers you should install htc sync.

I know, but it doesn't take.. Thanks for hint though

Update. When I tried to run RUU in windows I only get 170 connection error, also in fastboot mode. Found it as PB99IMG file and ran it through SDcard, but it didnt fix usb problem.. Is there a difference between those two methods when i comes to degree of restoring? Dont think so, anyway..

I'm not entirely sure, but you can try this: when the device's powered on and connected in bootloader mode, go into the Device Manager, and find your phone in the list. Right click and choose the option to install a new driver (I don't know the exact function name in English, my system's locale is Dutch). Then, go to the screen where you can select a driver. Select HTC in the vendor list and install the driver. That should fix your 170 error.
If that doesn't work, try this, and optionally the above again.

http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/ download zip from here and flash from recovery after renaming it update.zip
Blubba10 said:
Update. When I tried to run RUU in windows I only get 170 connection error, also in fastboot mode. Found it as PB99IMG file and ran it through SDcard, but it didnt fix usb problem.. Is there a difference between those two methods when i comes to degree of restoring? Dont think so, anyway..
Click to expand...
Click to collapse

Big thanks, but I´ve sent it in for repair. Hope to get in on garantee, but if not, I will just get it returned and try it out..

You need root for that though which he (and me) probably has not.

No, you don't. You can flash update.zip through the stock recovery.
Do you have access to that?
Sent from my HTC Desire using XDA App

I've never had to do a usb-brick fix, but from what I understand, you should have root to flash that particular "update.zip", because otherwise you'll end up with a sig ver error or some sort of that.
As said in the first step "1. Follow this r5 rooting guide to do Step 1 of the rooting.That will give you a basic ROM to work with, with root capability."
The reason I think you need to flash it as an "update.zip" file is because the r5 method in itself does not flash a custom recovery (from which you can flash files without regard to the name).

3722 said:
I've never had to do a usb-brick fix, but from what I understand, you should have root to flash that particular "update.zip", because otherwise you'll end up with a sig ver error or some sort of that.
As said in the first step "1. Follow this r5 rooting guide to do Step 1 of the rooting.That will give you a basic ROM to work with, with root capability."
The reason I think you need to flash it as an "update.zip" file is because the r5 method in itself does not flash a custom recovery (from which you can flash files without regard to the name).
Click to expand...
Click to collapse
Yup...And now we need 10chars.

I eneed up using rageagainstthecage method to apply usb fix.. Only way wich worked..
Sent from my HTC Desire using XDA App

Related

[SOLVED] Please help with T-Mobile UK DESIRE :Black Screen: Cannot Flash ROM:

Hi guys, I got a HTC DESIRE for my Wife but I tried to root it and somehow its failed:
Its a T-mobile UK locked device
Now I cant see anything on my device its working as I can hear the startup sound and when I try to run the official tmobile uk update it detects it but failed looking for bootloader mode.
Code:
[COLOR="Red"]SOME PROGRESS HERE NOT SURE IF ITS GOOD OR BAD[/COLOR]
[url]http://forum.xda-developers.com/showpost.php?p=7895731&postcount=44[/url]
My wife going to kill me
This is where the instructions I was using goldcard was succesful etc
http://theunlockr.com/2010/06/07/how-to-root-the-htc-desire/
The last stage I reach was n0.7
If anyone can help me I would appreciate it
Firstly, I'd recommend using unrevoked to root the phone. The way you are using is old and complicated.
Secondly, i imagine that your hboot is not 0.8 which means you'll need to downgrade.
It might be http://forum.xda-developers.com/showthread.php?t=750852 that you need to read and follow, although I'm not sure.
It would help if you knew what hboot you were.
iinga said:
Firstly, I'd recommend using unrevoked to root the phone. The way you are using is old and complicated.
Secondly, i imagine that your hboot is not 0.8 which means you'll need to downgrade.
It might be http://forum.xda-developers.com/showthread.php?t=750852 that you need to read and follow, although I'm not sure.
It would help if you knew what hboot you were.
Click to expand...
Click to collapse
hboot was 0.75 tmobile version was 1.15
With goldcard in the device, can you flash http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_127570_signed.exe successfully?
iinga said:
With goldcard in the device, can you flash http://shipped-roms.com/shipped/Bra...00.28U_4.06.00.02_2_release_127570_signed.exe successfully?
Click to expand...
Click to collapse
Device wont go into bootloader mode I'm trying this one now
RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed
as the PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed_txt.zip
1 hour to download
This is crap
The RUU itself can't put into bootloader?
If you want to try unrevoked, this is the post you need:
Q. My screen goes blank when I use custom recovery with unrevoked3.
A. You have an SLCD display and will need to use an updated recovery image until unrevoked3 itself is updated. It is safe to use this updated image on AMOLED screens too. You can download the image here: http://crop.floodbit.org/~defer/recovery-clockwork-2.5.0.1-bravo-slcd.img
http://forum.xda-developers.com/showthread.php?t=749551 - has everything about slcd rtc
The main problem is my screen is black and I cant see anything although windows is still detecting device
Instead of the RUU, try giving unrevoked a whirl with that custom recovery image (make sure phone is unplugged whilst started unrevoked). Also, follow the instructions from unrevoked about installing the htc drivers (unless you have already installed the latest htc drivers).
Battery pull, then turn on whilst holding volume down. Hopefully this will give you bootloader and unrevoked should be able to do its magic (if you select that custom recovery image)
This will give you root.
iinga said:
Instead of the RUU, try giving unrevoked a whirl with that custom recovery image (make sure phone is unplugged whilst started unrevoked). Also, follow the instructions from unrevoked about installing the htc drivers (unless you have already installed the latest htc drivers).
Battery pull, then turn on whilst holding volume down. Hopefully this will give you bootloader and unrevoked should be able to do its magic (if you select that custom recovery image)
This will give you root.
Click to expand...
Click to collapse
ok bro I will try how do I flash the image?
duttythroy said:
ok bro I will try how do I flash the image?
Click to expand...
Click to collapse
http://unrevoked.com
1. Choose desire then download.
2. Follow instructions in hboot driver.html (to make sure your phone is recognised correctly)
3. Run reflash.exe
4. File>Custom Recovery (Ctrl+R)
5. Download and select http://crop.floodbit.org/~defer/recovery-clockwork-2.5.0.1-bravo-slcd.img
6. Plug in desire - hopefully you have USB debugging enabled. If not, I think you can achieve root by loading bootloader yourself (battery pull device and then vol down + power)
iinga said:
http://unrevoked.com
1. Choose desire then download.
2. Follow instructions in hboot driver.html (to make sure your phone is recognised correctly)
3. Run reflash.exe
4. File>Custom Recovery (Ctrl+R)
5. Download and select http://crop.floodbit.org/~defer/recovery-clockwork-2.5.0.1-bravo-slcd.img
6. Plug in desire - hopefully you have USB debugging enabled. If not, I think you can achieve root by loading bootloader yourself (battery pull device and then vol down + power)
Click to expand...
Click to collapse
I will try bro thanks again
duttythroy said:
I will try bro thanks again
Click to expand...
Click to collapse
I done everything but still dont understand what to do with this recovery-clockwork-2.5.0.1-bravo-slcd.img
the drivers were installed correctly and my computer can see my device,
But still no luck I think I'm missing something I cant see anything on my screen, I know the device alive as I can hear the atrt up sound and compuer now detect in device manager
This is what hapens when I try to attempt flashing with official ruu
Ok unplug the desire from the pc then battery pull and then hold volume-down (on left hand side of the phone) and then press power (whilst holding volume-down). Then plug in and run the RUU again.
With that recovery-clockwork-2.5.0.1-bravo-slcd.img, you select it in unrevoked by pressing ctrl + r (on windows) and then just connect your desire.
Do the RUU first
first think u sholud know about rooting is hboot version.. maybe you have hboot 083 version
read here
http://forum.xda-developers.com/showthread.php?t=749551
and here
http://forum.xda-developers.com/showthread.php?t=748498
http://forum.xda-developers.com/showthread.php?t=762638
monyozt said:
first think u sholud know about rooting is hboot version.. maybe you have hboot 083 version
read here
http://forum.xda-developers.com/showthread.php?t=749551
and here
http://forum.xda-developers.com/showthread.php?t=748498
http://forum.xda-developers.com/showthread.php?t=762638
Click to expand...
Click to collapse
Thanks I will try, I think my device was 0.75 software version 1.15 but will try, I'm getting annoyed now
Did u try to flash using xp instead of Vista or seven? Hope it will help, because I've installed a dual boot seven/xp in my laptop to root and flash, as seven recognized my Desire but I couldn't detect the phone with HTC sync or official ruu
Sent from my HTC Desire using XDA App
djigane said:
Did u try to flash using xp instead of Vista or seven? Hope it will help, because I've installed a dual boot seven/xp in my laptop to root and flash, as seven recognized my Desire but I couldn't detect the phone with HTC sync or official ruu
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Its detected and ruu runs and check my current version and shows which version I'm uploading to, the problem is its trying to detect bootloader and thats where its failed
Did you do what i said? battery pull, then voldown + power?
This is the failed flash ruu after trying to find bootloader
I think this is getting hopeless and I want to thank so far all those who are helping me

[Q] HELP! Desire won't boot!

Hi everybody,
I have an S-Off HTC Desire running LeeDroid 2.3d. I've also flashed Clockwork Recovery 3.0.0.5 as the default recovery for the phone. I have been using an 8GB microSD until I got a 16GB today. I pulled the 8GB out and inserted the 16GB into the phone. However, once i put the 16GB inside the phone, it would no longer boot. The phone no longer boots up into the ROM, and it doesn't boot into Recovery mode as well; it just remains at the white HTC screen. Basically, I can only get into the Bootloader and Fastboot. Does anyone know what might be wrong and how I could fix this? Thanks a lot in advance!!
EDIT: I have since tried flashing different recoveries through Fastboot, but to no avail.
Come on guys I would REALLY appreciate if anyone could help me out with this =)
It boots up with the old 8 GB card?
If yes, you have to partition the new card for the custom ROM and reflash the ROM or restore a nandroid backup.
Sent from my customized HTC Desire using TTP
No, the phone does not boot up even with the old 8GB card. It's the same issue as with the 16GB card.
Do you guys think it would help at all if I tried to remove S-off from the device? I'm getting pretty desperate for ideas so any help is greatly appreciated.
Would anyone know how to remove S-off? Correct me if I'm wrong, but I believe I need the PB99IMG.zip file that downgrades the HBOOT from 0.93.1 down to 0.80 (or any other version would probably do). Is this correct? Does anyone have the file they could link me to? Thanks!
Delete please :/
Sent from my ZX Spectrum +2 using 128k BASIC
scatterface said:
Delete please :/
Sent from my ZX Spectrum +2 using 128k BASIC
Click to expand...
Click to collapse
???? Why??
Does it boot with no sdcard in?
Sent from my HTC Desire using Tapatalk
No, it does not boot at all. I've tried with an SD, without an SD. Even without a SIM
I would suggest running the RUU for your original rom, or one of the WWE ones. This will put your phone back to stock, no root, no s-off.
All of your data will also be wiped.
Sent from my HTC Desire using Tapatalk
mikep99 said:
I would suggest running the RUU for your original rom, or one of the WWE ones. This will put your phone back to stock, no root, no s-off.
All of your data will also be wiped.
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I'm sorry but I'm not sure how to do that. Can I do that even though I have no access to Recovery mode? If you could give me some instructions and point me in the direction of the file, that would be great!
You can do this if you can get into fastboot.
What are your original rom details? And was your phone branded/which carrier/which country etc..
The more details the better
Sent from my HTC Desire using Tapatalk
Originally, my phone was from Hong Kong. I didn't buy it with a carrier, it was from an electronics store. So basically, it was unbranded and unlocked when I first got it.
Also, I'm really not sure how to do this through Fastboot, or even where to get the files... So yah... Sorry if I'm such an idiot lol
One more thing. I'm not sure if this is relevant but I don't have a goldcard.
OK, short and bundled for you. This is only a guidance list, you'll have to get the details yourself with your google-fu.
- get the android SDK. You'll get adb and fastboot with it.
- install the adb drivers.
- once you got that try "fastboot devices" in your windows command shell.
- it shows your device? OK, you did everything correctly.
- get to flash whatever you like by downloading an img file and flashing it with "fastboot <target location> <img-filename>
Cheers.
Ok another possibly stupid question. I've gone on this link: http://forum.xda-developers.com/showthread.php?t=695667 and have downloaded one of the GSM WWE files. However, it's a .exe file. What do I do with that? I was under the impression that Fastboot only works with .img files? Also, what is the difference between the GSM WWE and the GSM URL files?
I have tried following some instructions I found off Google. It told me to run the RUU .exe file and extract the rom.zip file from it. I did this, renamed it to PB99IMG.zip, put it onto my SD, and tried to flash it via the Bootloader. However, I am given a message saying the CID is incorrect. I'm guessing this might be because I don't have a GoldCard? All in all, my phone is still not fixed, and I'm really hoping someone could help me out (i.e., give me some instructions as to how to flash the RUU .exe file through Fastboot).
Remove the PB99IMG.zip file from the sd card.
Turn off the phone.
Hold down back and the power button.
You should now be in the fastboot menu.
Plug the phone into your computer with usb. It should now say 'fastboot usb' instead of 'fastboot' on the phone.
Then run the RUU exe file on your computer and follow the instructions on the screen of your computer. It will install the rom automatically.
I had this problem at the weekend and couldn't fix it. Phone went off to HTC who have sent it back after fixing, I don't know what they did though because I missed the delivery of my phone back today
http://forum.xda-developers.com/showthread.php?t=951950
The error message indicates you need a goldcard to flash the WWE ROM.
have you checked if one of the Asian ones can be applied without a goldcard.
http://shipped-roms.com/index.php?category=android&model=Bravo
Sent from my HTC Desire using Tapatalk
kino1122 said:
Do you guys think it would help at all if I tried to remove S-off from the device? I'm getting pretty desperate for ideas so any help is greatly appreciated.
Would anyone know how to remove S-off? Correct me if I'm wrong, but I believe I need the PB99IMG.zip file that downgrades the HBOOT from 0.93.1 down to 0.80 (or any other version would probably do). Is this correct? Does anyone have the file they could link me to? Thanks!
Click to expand...
Click to collapse
The Downgrade of the Bootloader only works if you are running a device that can actually boot up fully. Download this RRU, put your phone into Fastboot via the Bootloader menu, connect your phone to the computer whilst in Fastboot, you should see the Red Fastboot writing change to Fastboot USB Plug, when you see this run the RRU you downloaded, and you're device should be restored to Factory Default with the latest version of Froyo. You WILL loose all data and root and S-Off, but this is the only thing I can think of to fix your device mate hope I helped...
*Sorry, I just realised someone had posted a similar tutorial, I only read the first page of the thread, didn't realise there was a second. You don't need the AndroidSDK, if you have HTC Sync installed, then all the drivers should automatically be there, but when you run the RRU, just make sure that you close HTC Sync (it'll appear in the taskbar on Windows) as it thinks the device is syncing, and can occasionally cause problems.
YES!!!! You guys are amazing! I managed to find my old GoldCard and flashed the RUU jaaystott posted. The phone now boots up and everything is in perfect working order. I'll be sure to thank everyone for their help!

Bricked Desire?! :(

Hey guys I'm really desperate right now...
I don't know what to to, I can't boot my Desire, I can't get into recovery, just fastboot is working. I'm always stuck on the splashscreen.
To begin with the story, I rooted my Desire months ago, flashed a new rom from time to time and everything worked fine. So yesterday I wanted to try out RCMix S CM7 where the FAQ said i need S-OFF.
So this also worked quite fine. But then I got problems partitioning my SDCard (dont know what why or so, my Desire didnt recognize it anymore)
Today I tried again but I made it even worse, now I can't boot my Rom anymore and I can't get into Recovery. So what should I do? I searched the internet for hours now and tried nearly everything.
I tried to flash an official RUU, in fact this one: RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Becaus the others were too "old". But when I tried starting this one it couldnt detect my desire. USB connecion error.
But still it seems it flashed a new hboot because now I am S-ON again.
Then I tried to flash a Stock ROM via fastboot, which first failed because it wasn't signed and the second one failed because android-info.txt and android-product.txt were missing.
I tried to flash the recovery again but it's still stuck on the splashcreen.
I don't know what to do anymore... could you PLS help me? Or is my Desire now bricked??
What can I do, or try...?
greets patrick
scroach said:
Hey guys I'm really desperate right now...
I don't know what to to, I can't boot my Desire, I can't get into recovery, just fastboot is working. I'm always stuck on the splashscreen.
To begin with the story, I rooted my Desire months ago, flashed a new rom from time to time and everything worked fine. So yesterday I wanted to try out RCMix S CM7 where the FAQ said i need S-OFF.
So this also worked quite fine. But then I got problems partitioning my SDCard (dont know what why or so, my Desire didnt recognize it anymore)
Today I tried again but I made it even worse, now I can't boot my Rom anymore and I can't get into Recovery. So what should I do? I searched the internet for hours now and tried nearly everything.
I tried to flash an official RUU, in fact this one: RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Becaus the others were too "old". But when I tried starting this one it couldnt detect my desire. USB connecion error.
But still it seems it flashed a new hboot because now I am S-ON again.
Then I tried to flash a Stock ROM via fastboot, which first failed because it wasn't signed and the second one failed because android-info.txt and android-product.txt were missing.
I tried to flash the recovery again but it's still stuck on the splashcreen.
I don't know what to do anymore... could you PLS help me? Or is my Desire now bricked??
What can I do, or try...?
greets patrick
Click to expand...
Click to collapse
If fastboot is working you should be pretty much safe. It seems like you got an usb brick. Try this thread: http://forum.xda-developers.com/showthread.php?t=691187
My Suggestion ... Create a Goldcard beofre doing anything.. once done you can put PB99IMG.zip into ur SD card and it will flash automatic once you goto fastboot... but Goldcard is a must for this.. if you dont knw search how to create goldcard.
For Goldcard
http://www.addictivetips.com/mobile...gold-card-for-htc-desire-without-hex-editing/
or
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
Pat, is your phone branded ?
Flash the correct RUU for your phone (one that came with your phone originally), it does not really matter how old it is. after you done that your should get back to stock you can re-root it and then load the firmware you want.
if you don't know what your phone came with originally. then you will need a goldcard to get back to stock
@paul.c: nope it isn't branded
@dennis.l: I can't! I tried some of this list: http://forum.xda-developers.com/showthread.php?t=695667
The old ones with 1.15 and 1.21 started, but didn't work because it said they are too old or something like that.
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4. 05.00.11_release_122704.exe
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
Then I tried the newer one with FroYo, but this one throw and error saying it can't even find or connect to my phone.
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So what I've read so far I definitely need a goldcard right?
But all those manuals say I have to boot up and activate USB Debugging Mode... but I cant boot up a rom. The only thing that is working right now is fastboot.
Is it possible to make a goldcard without booting up? Or do I have to get a working Desire to make the goldcard?
I haven't got a cardreader either but seems I've got to get one.
Right now I'm not at home so can just try it in the evening.
scroach said:
@paul.c: nope it isn't branded
@dennis.l: I can't! I tried some of this list: http://forum.xda-developers.com/showthread.php?t=695667
The old ones with 1.15 and 1.21 started, but didn't work because it said they are too old or something like that.
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4. 05.00.11_release_122704.exe
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed.exe
Then I tried the newer one with FroYo, but this one throw and error saying it can't even find or connect to my phone.
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So what I've read so far I definitely need a goldcard right?
But all those manuals say I have to boot up and activate USB Debugging Mode... but I cant boot up a rom. The only thing that is working right now is fastboot.
Is it possible to make a goldcard without booting up? Or do I have to get a working Desire to make the goldcard?
I haven't got a cardreader either but seems I've got to get one.
Right now I'm not at home so can just try it in the evening.
Click to expand...
Click to collapse
You don't need goldcard for unbranded phones.
Even Unbranded phone requires goldcard to be able to flash any RUU...
So I prefer you create goldcard.. and yehs you can create goldcard without booting..
If you have anyone with android mobile.. goto market and search for goldcard helper.. and insert you memory card in that phone.. and run the goldcard helper.. it will give you the reverse CID .. whcih you can use to create goldcard... but you will require a card reader for sure..... just try your luck with your current phone.. just plug in the phone and run the Goldcard tool.. and check if your phone is detecting
THANK YOU GUYS SO MUCH!!
You saved my life! xD
I made a goldcard as you said with the help of a friend and his desire. Then I put it my phone and suddenly I could flash the newest Stock ROM
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So everything went great, I've got root again, a working stock rom and I'm able to start recovery mode again.
THANK YOU VERY MUCH!
paul.c said:
You don't need goldcard for unbranded phones.
Click to expand...
Click to collapse
I'm glad to hear that. Sorry, it seems that I have to learn more.
scroach said:
THANK YOU GUYS SO MUCH!!
You saved my life! xD
I made a goldcard as you said with the help of a friend and his desire. Then I put it my phone and suddenly I could flash the newest Stock ROM
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
So everything went great, I've got root again, a working stock rom and I'm able to start recovery mode again.
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
Anytime Bro
I recently experienced a similar problem. And all the stuff you described wrong with your phone is the same on mine.
What I want to know is how to get back to stock and all that? A step by step guide would be very much apreciated..
I tried following this guide:http: //forum.xda-developers.com/showthread.php?t=691639
but as I try to enable my sdcard it get an error:
"The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem".
I recently installed the JDK and just downloaded the newest android SDK to work with.
Besides I'm considering whether I'm doing this right. I do have to use the CMDprompt right? and direct it to my androidsdk/tools directory?
I'm pretty much new to messing around with my phone through the CMD though. Please be gentle when you describe any methods that might work..?
Regards,
Me
Hammerbak said:
I recently experienced a similar problem. And all the stuff you described wrong with your phone is the same on mine.
What I want to know is how to get back to stock and all that? A step by step guide would be very much apreciated..
I tried following this guide:http: //forum.xda-developers.com/showthread.php?t=691639
but as I try to enable my sdcard it get an error:
"The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem".
I recently installed the JDK and just downloaded the newest android SDK to work with.
Besides I'm considering whether I'm doing this right. I do have to use the CMDprompt right? and direct it to my androidsdk/tools directory?
I'm pretty much new to messing around with my phone through the CMD though. Please be gentle when you describe any methods that might work..?
Regards,
Me
Click to expand...
Click to collapse
Adbwinapi.dll was moved to the platform-tools dir in the android sdk and the sdk path in Windows hasn't be updated. In win xp right click my computer, go to system then click the system variables button. Find "path" and change it to point in to the "platform-tools" folder... Note I'm not at my pc so I can't remember 100% what tab the system variables button is on
Sent from my HTC Desire using XDA Premium App
Hammerbak said:
I recently experienced a similar problem. And all the stuff you described wrong with your phone is the same on mine.
What I want to know is how to get back to stock and all that? A step by step guide would be very much apreciated..
I tried following this guide:http: //forum.xda-developers.com/showthread.php?t=691639
but as I try to enable my sdcard it get an error:
"The program can't start because AdbWinApi.dll is missing from your computer. Try reinstalling the program to fix this problem".
I recently installed the JDK and just downloaded the newest android SDK to work with.
Besides I'm considering whether I'm doing this right. I do have to use the CMDprompt right? and direct it to my androidsdk/tools directory?
I'm pretty much new to messing around with my phone through the CMD though. Please be gentle when you describe any methods that might work..?
Regards,
Me
Click to expand...
Click to collapse
Stumbled into the same problem. Just download it from the internet.
hi,
rage is right, better declare environnement variable, right click comupter - select properties - windows select advanced and you should see variable environnement. just add the path where adb is installed... mine is the following defaut path(C:\Program Files\Android\android-sdk-windows\tools) + (C:\Program Files\Android\android-sdk-windows\platform-tools) should add the in the user environ... name = path variable= the 2 path separated by a ;
Well I got desperate and I think that I've totally bricked my phone. I was going to a family arrangement and I didn't know the way so I was hoping that flashing the original RUU, would make me able to use the phone and the navigation in it, while starting the phone in fastboot would help. Seems it didn't. The RUU I tried to install seems it was a wrong one (here to say that I tried flashing it through the installer on my pc), but this was stated pretty late in the installation process.. where the guide told me to install a proper one.
My phone is now totally unresponsive. It won't even charge. When I hold the power button it just vibrates once and then nothing else happens.
Is it bricked? If so, does anyone know what my chances are with my warranty? Now that I've had it rooted and stuff, does my warrenty then expire and can they "track" the rooting part if I hand in it to their support?
Best of regards,
Me.
Hammerbak said:
Well I got desperate and I think that I've totally bricked my phone. I was going to a family arrangement and I didn't know the way so I was hoping that flashing the original RUU, would make me able to use the phone and the navigation in it, while starting the phone in fastboot would help. Seems it didn't. The RUU I tried to install seems it was a wrong one (here to say that I tried flashing it through the installer on my pc), but this was stated pretty late in the installation process.. where the guide told me to install a proper one.
My phone is now totally unresponsive. It won't even charge. When I hold the power button it just vibrates once and then nothing else happens.
Is it bricked? If so, does anyone know what my chances are with my warranty? Now that I've had it rooted and stuff, does my warrenty then expire and can they "track" the rooting part if I hand in it to their support?
Best of regards,
Me.
Click to expand...
Click to collapse
only guessing but if NOTHING turns on or boots, as in you just see a black screen then there is not going to be a way for any one to know the phone was rooted
try taking it back on warranty
I thought the same thing myself. Since it's unable to boot into the "recovery" menu by holding down "power + volume down" I guess it's not rooted anymore anyhow. During the RUU installation I noticed that it was installing a new "image-something" which I'm guessing means that it was writing over the root and recovery after which the installation failed.
Anyhow I'll try that and hope for the best. Thanks
Hammerbak said:
I thought the same thing myself. Since it's unable to boot into the "recovery" menu by holding down "power + volume down" I guess it's not rooted anymore anyhow. During the RUU installation I noticed that it was installing a new "image-something" which I'm guessing means that it was writing over the root and recovery after which the installation failed.
Anyhow I'll try that and hope for the best. Thanks
Click to expand...
Click to collapse
Are you able to recognise the phone in adb at all?
From what I know it's very rare to completely brick unless you are flashing hboots or radios.

[Q] RUU restore for warranty fails: error 140. Anyone can help?

Hi guys,
I own a Fastweb branded desire and back key isn't working anymore.
So I'm tring to restore the branded official rom for warranty.
I got s-off and root and my gold card is in.
I've flashed the old modaco r6 rom to avoid main version is older and flashed downgrade hboot(alpharev) too.
When I start the ruu hboot 0.75 and old radio are flashed properly, but I still have custom splash and cwm recovery also system is untouched.
Ruu stops with error 140 bootloader problem.
I'm still able to flash custom roms and I can s-off again, but I really don't know what to do.
Any help?
Thanks.
Best regards.
Jus
You're in the wrong section dude, read the rules.. all questions go to q&a section
This sections is set aside for development only
Sent from my HTC Desire using XDA App
Sorry mate, is there a way to change section?
jussy,
I had exactly the same problem so I'll answer even tho this is the wrong thread. You have to start first by extracting the zip file from the RUU. Run the RUU until it gets to the first screen then leave it there (don't close it).
Go to Start -> Run and type %temp%.
Find the temporary folder folder that's just been created (sort based on date) and find a file called 'rom.zip'. Copy this file into another location and close the RUU.
FreshNClean said:
jussy,
I had exactly the same problem so I'll answer even tho this is the wrong thread. You have to start first by extracting the zip file from the RUU. Run the RUU until it gets to the first screen then leave it there (don't close it).
Go to Start -> Run and type %temp%.
Find the temporary folder folder that's just been created (sort based on date) and find a file called 'rom.zip'. Copy this file into another location and close the RUU.
Click to expand...
Click to collapse
Thanks for replay.
I've extracted rom.zip and renamed to PB99IMG.zip. tried to flash it in fastboot.
Flash process start but stops before finishing leave me in the same situation as before. If I want to flash it again gives me main version is older.
I've s-off it 10 times today and made many try.
EDIT: I've also tried to flash via fastboot commander the .img files in rom.zip but after that I could only access fastboot.
Now I've flash a generic ruu to make it boot.
Tbh mate I'm not sure how to change it lol.. mayb delete and repost in q&a..
Just beware of flames coming your way lol
Sent from my HTC Desire using XDA App
jussy said:
Thanks for replay.
I've extracted rom.zip and renamed to PB99IMG.zip. tried to flash it in fastboot.
Flash process start but stops before finishing leave me in the same situation as before. If I want to flash it again gives me main version is older.
I've s-off it 10 times today and made many try.
EDIT: I've also tried to flash via fastboot commander the .img files in rom.zip but after that I could only access fastboot.
Now I've flash a generic ruu to make it boot.
Click to expand...
Click to collapse
Dude, don't flash the zip, just put it in the root of your SD, then switch phone off, hold vol down button and reboot into recovery, your phone will recognize the pb99img.zip and some options should come up. Follow the on screen instructions and you should be unrooted in 15 mins max.
Traced from a Reflex S Desire
3f1f37 said:
Dude, don't flash the zip, just put it in the root of your SD, then switch phone off, hold vol down button and reboot into recovery, your phone will recognize the pb99img.zip and some options should come up. Follow the on screen instructions and you should be unrooted in 15 mins max.
Traced from a Reflex S Desire
Click to expand...
Click to collapse
Sorry for my bad english but what you said is what I've done.
1-root and s-off.
2-flash downgrade hboot(alpharev).
3-put PB99IMG.zip (extract as said from my branded ruu) on sd card root.
4-boot power + vol down.
5-It starts, step 1 goes well then at the end of step 2 screen became black and came back with 0.75 hboot s-on and if I try again it gives me main version is older.
So I can only reboot, reflash a rom and s-off it again.
Never ending loop...
Thanks anyway.
You are using wrong RUU.use the RUU with 5.11.05.27 , I am on mobile so can't give you the exect link.I will post it tomorrow for you, if you can't find.
And it is better to create a goldcard if you havent yet
Sent from my HTC Desire using Tapatalk
jhonybravo4u said:
You are using wrong RUU.use the RUU with 5.11.05.27 , I am on mobile so can't give you the exect link.I will post it tomorrow for you, if you can't find.
And it is better to create a goldcard if you havent yet
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
I've got my gold card already in.
Sadly there's only one ruu for my carrier.
I can flash a generic froyo ruu but it's not good for warranty.
I can't really help in terms of your issue.
If I remember right, I booted into the bootloader and switched on fastboot, then ran the RUU EXE making sure my phone was connected to my pc.
It eventually came right.
Saying that, after I got the stock ROM back on, my phone went ape (and to this day I have no idea why). Random restarts. Freezing. It was crazy. I had to upgrade the RUU for it to stay on properly. Was really weird.
There are so many threads about rooting for warrantee purposes, perhaps search them or go through thier instructions, cause I'm sure someone may have had the same issue.
Wish I could help you though.
mr_norris said:
I can't really help in terms of your issue.
If I remember right, I booted into the bootloader and switched on fastboot, then ran the RUU EXE making sure my phone was connected to my pc.
It eventually came right.
Saying that, after I got the stock ROM back on, my phone went ape (and to this day I have no idea why). Random restarts. Freezing. It was crazy. I had to upgrade the RUU for it to stay on properly. Was really weird.
There are so many threads about rooting for warrantee purposes, perhaps search them or go through thier instructions, cause I'm sure someone may have had the same issue.
Wish I could help you though.
Click to expand...
Click to collapse
It seems you didn't got the problem.
Thanks anyway.
I did it!!!!
Thanks to this guide http://forum.xda-developers.com/showthread.php?t=821809
and all of you.
So many thanks.
Sorry guys I got an other problem...
Now this is the second time I bring it to assistence (last time was for vol down) and when they give it back to me it was updated to froyo.
I'm facing problem with 1.15=>1.21 OTA, installation is aborted due to status 7 (if some one can help I'll post the full error message).
Unfortunetly the ruu I've used is the only one from my carrier.
Will they know that my phone was updated by them and I'll lose my warranty?
Any idea about fixing status 7?
Many thanks.
Best regads,
Jussy

[Q] Problems with installing blackout ics ROM Desire HD

So I decided to root my android desire hd phone and avail the benefits of blackout ics rom on my phone.
This is how I approached.
I unlocked the bootloader from HTC Dev.
I have the adb with me, adb devices, adb restart bootloader are working absolutely fine and cell phone was detectable.
I downloaded the aahk and blackout rom from xda forums.
But I am not able to use the aahk properly. It says in instruction to do a fastboot flash boot boot.img from command prompt with the source being the place where aahk is placed on the PC. But it still doesn't work, and probably this is the root cause of the issues I am facing.
I tried downloading the CWM to boot into recovery, but that also gave me an error stating cannot find the adbwinapi.dll file.
So after that, I did a factory reset of my cellphone and truly I got my first success and I was able to get into the bootloader and recovery.
I can reach to the bootloader screen (white screen+3 andro dummies), but when I select the fastboot option It says cannot find image(which image, is it referring to boot.img). I deleted the cache on my cell phone, but again things are pending from here on.
The description on this screen says S-ON and some other things. Does that mean the security is still on?
I have the rom loaded on the sd card with renamed to update.zip, but when I select update option from the recovery it again says cannot find image, rebooting!(what image this is referring to).
And after all this sequence I am down with a cellphone now degraded to froyo from ginger bread and back to stone age!
Please advise.
TH3_M0Nk said:
So I decided to root my android desire hd phone and avail the benefits of blackout ics rom on my phone.
This is how I approached.
I unlocked the bootloader from HTC Dev.
I have the adb with me, adb devices, adb restart bootloader are working absolutely fine and cell phone was detectable.
I downloaded the aahk and blackout rom from xda forums.
But I am not able to use the aahk properly. It says in instruction to do a fastboot flash boot boot.img from command prompt with the source being the place where aahk is placed on the PC. But it still doesn't work, and probably this is the root cause of the issues I am facing.
I tried downloading the CWM to boot into recovery, but that also gave me an error stating cannot find the adbwinapi.dll file.
So after that, I did a factory reset of my cellphone and truly I got my first success and I was able to get into the bootloader and recovery.
I can reach to the bootloader screen (white screen+3 andro dummies), but when I select the fastboot option It says cannot find image(which image, is it referring to boot.img). I deleted the cache on my cell phone, but again things are pending from here on.
The description on this screen says S-ON and some other things. Does that mean the security is still on?
I have the rom loaded on the sd card with renamed to update.zip, but when I select update option from the recovery it again says cannot find image, rebooting!(what image this is referring to).
And after all this sequence I am down with a cellphone now degraded to froyo from ginger bread and back to stone age!
Please advise.
Click to expand...
Click to collapse
You have not done anything fine...anything at all. My advice is that you'd better start reading hard buddy or you will end up with a 300 bucks paperweight.
Use the guide in my signature to start.
Tip 1:If you really downgrade to froyo and you were running gingerbread, you might have messed the bootloader..can you boot in hboot in normal times or takes ages?
Tip 2:The Hack Kit can not be run with an unlocked bootloader...that is what the manual says. The manual is there just to avoid this.
If your bootloader is still unlocked, then you have to install CWM recovery, put the rom in the sdcard (no rename is necessary) and then flash the boot.img from where that file is located (I usually put in the PC desktop) and not from the Hack Kit folder.
Then, from CWM flash the rom normally and you will be up and running.
Unlocking the bootloader will not give you S-OFF....
glevitan said:
You have not done anything fine...anything at all. My advice is that you'd better start reading hard buddy or you will end up with a 300 bucks paperweight.
Use the guide in my signature to start.
Tip 1:If you really downgrade to froyo and you were running gingerbread, you might have messed the bootloader..can you boot in hboot in normal times or takes ages?
Tip 2:The Hack Kit can not be run with an unlocked bootloader...that is what the manual says. The manual is there just to avoid this.
If your bootloader is still unlocked, then you have to install CWM recovery, put the rom in the sdcard (no rename is necessary) and then flash the boot.img from where that file is located (I usually put in the PC desktop) and not from the Hack Kit folder.
Then, from CWM flash the rom normally and you will be up and running.
Unlocking the bootloader will not give you S-OFF....
Click to expand...
Click to collapse
I had this tutorial open side by side in your signature while I was doing it. (the noob one)
I can go into Hboot normal times.
I am writing it down here from the main website from where I downloaded the aahk. And it says
Unlock the bootloader using the HTC DEV bootloader unlock process.
Download att-ace-30-isboot.zip and unzip it (don’t forget to check MD5)
fastboot flash boot boot.img
relock bootloader
But just now you told me that it should not be run on an unlocked bootloader! I am a little confused.
TH3_M0Nk said:
I had this tutorial open side by side in your signature while I was doing it. (the noob one)
I can go into Hboot normal times.
I am writing it down here from the main website from where I downloaded the aahk. And it says
Unlock the bootloader using the HTC DEV bootloader unlock process.
Download att-ace-30-isboot.zip and unzip it (don’t forget to check MD5)
fastboot flash boot boot.img
relock bootloader
But just now you told me that it should not be run on an unlocked bootloader! I am a little confused.
Click to expand...
Click to collapse
Yeah, but also says this: "...No Temproot for Inspire Build 3.20.502.52..." But you have a Desire HD, haven't you? And your build is not that one, is it?
glevitan said:
Yeah, but also says this: "...No Temproot for Inspire Build 3.20.502.52..." But you have a Desire HD, haven't you? And your build is not that one, is it?
Click to expand...
Click to collapse
Yeah.
I think i found the answers I was looking for and since I used the bugger HTC dev unlocker (which I shouldn't have used), I have to come down a step and start over again.
http://forum.xda-developers.com/showpost.php?p=31211732&postcount=396
This made me realize deep down search is more important. Thanks
TH3_M0Nk said:
Yeah.
I think i found the answers I was looking for and since I used the bugger HTC dev unlocker (which I shouldn't have used), I have to come down a step and start over again.
http://forum.xda-developers.com/showpost.php?p=31211732&postcount=396
This made me realize deep down search is more important. Thanks
Click to expand...
Click to collapse
No problem. Get a working phone and then you can try to run the Hack Kit...but it has to be stock or otherwise will not work. :good:
glevitan said:
No problem. Get a working phone and then you can try to run the Hack Kit...but it has to be stock or otherwise will not work. :good:
Click to expand...
Click to collapse
I am not sure if you are on right now, but i am giving a try to the steps mentioned by that gentlemen above in the link.
the phone is now stuck at signature verification. I reasearched for it but could not find a viable solution or an exploit that can overcome it(though everyone seems to be suggesting to install CWM recovery)
Not taking any chances to convert my phone into a brick! Whats the best way.
TH3_M0Nk said:
I am not sure if you are on right now, but i am giving a try to the steps mentioned by that gentlemen above in the link.
the phone is now stuck at signature verification. I reasearched for it but could not find a viable solution or an exploit that can overcome it(though everyone seems to be suggesting to install CWM recovery)
Not taking any chances to convert my phone into a brick! Whats the best way.
Click to expand...
Click to collapse
ok, Have you managed to unlock the bootloader? if you are already unlocked, do you mind if I have a look at it over teamviewer?
glevitan said:
ok, Have you managed to unlock the bootloader? if you are already unlocked, do you mind if I have a look at it over teamviewer?
Click to expand...
Click to collapse
I am following the steps sequentially as mentioned in that link by sashank. The bootloader is partially unlocked due to the HTCDEV process.
Couple of other things that I noticed. The android version is still at 2.3.5 however the device was shipped with Froyo. My mistake to have said that it is downgraded to froyo when I did the factory reset.
The facebook for HTC Sense thing is jacked up big time, I cannot find that in peoples app.
The device has (believe me) gained speed. pretty strange.
Once I reach home 3 hours from now, i'll update this thread and we can connect through Teamviewer so that you can have a look.hope thats cool!
Thanks
TH3_M0Nk said:
I am following the steps sequentially as mentioned in that link by sashank. The bootloader is partially unlocked due to the HTCDEV process.
Couple of other things that I noticed. The android version is still at 2.3.5 however the device was shipped with Froyo. My mistake to have said that it is downgraded to froyo when I did the factory reset.
The facebook for HTC Sense thing is jacked up big time, I cannot find that in peoples app.
The device has (believe me) gained speed. pretty strange.
Once I reach home 3 hours from now, i'll update this thread and we can connect through Teamviewer so that you can have a look.hope thats cool!
Thanks
Click to expand...
Click to collapse
Ok, just let me know when you are online and be arrange it.
glevitan said:
Ok, just let me know when you are online and be arrange it.
Click to expand...
Click to collapse
Yes I am online now. Let me know how to proceed.
TH3_M0Nk said:
Yes I am online now. Let me know how to proceed.
Click to expand...
Click to collapse
download the teamviewer: http://www.teamviewer.com
Get the ID and PASS and send them over a Private Message, NOT HERE

Categories

Resources