Develop Bugs

[Q] I need help. Kingdom GingerSense 3.0 rom

I have the Kingdom Gingerbread/Sense 3.0 rom, and last night it kept force closing Sense to the point where I couldn't even get to the homescreen ever. I could only use apps that were in the notification bar. I read that these problems work themselves out after a few hours of having the rom, so I let it sit over night, and when I woke up, I could receive no signal and there was still no hope of reaching the homescreen. It can't connect to the network at all, and I can't even try to do anything about it. Can anyone offer any help?

If you are simply wanting to check out all of the features of this ROM I would recommend you reflash it in recovery.
If you were expecting this ROM to be the least bit useful as Alpha then perhaps you should switch to a stable gingerbread ROM such as CyanogenMod and forget about sense 3.0 until they work out the bugs.

i am on uber kingdom gingersense and seems to be working good for me. I wiped everything and i flashed it in recovery. make sure you wipe everything and let it sit for a bit

Takes a while for everything to settle in.
Sent from my Optimized Inc using XDA App

anothervictim. said:
If you are simply wanting to check out all of the features of this ROM I would recommend you reflash it in recovery.
If you were expecting this ROM to be the least bit useful as Alpha then perhaps you should switch to a stable gingerbread ROM such as CyanogenMod and forget about sense 3.0 until they work out the bugs.
Click to expand...
Click to collapse
Yeah, its def not on a daily driver level yet. I had no major issue, but just lagged for me... And how did we lose landscape support from 2.0 to 3.0? WTF

As long as you wipe all before flash you should be fine. give it sometime to load then restart a couple of times ( Power+ Vol Down+ Opt Mouse ) then i would reboot into recovery and fix permissions. Works well for me. Plus B1 is out now.

Cant mount my phone to my computer with MIUIAndroid rom

hey everyone, this is not my first time with rooting my phone and flashing roms and never had any problems entail now. today i flashed MIUIAndroid 2.6.1 update 2 and mason kernel G - v0.14 sbc with almost everything working great, but i cant mount my phone to my computer. i reboot the phone and flashed my phone again. i can mount my phone when im not flashed to MIUIAndroid 2.6.1 update 2. can someone please help me, i really like this rom and would love to keep it. thanks

Is this a battery problem? Phone Restarting

Hi,
I have just started having problems with my HD Desire which is running Mikes Revolution HD 7.0.4 ROM. It seems that everytime I get out of range of my wireless connection, the phone will shutdown in a very short time and then is impossible to restart. It will get to the splash screen and then shutdown again. I can however restart the phone in recovery and the battery will show that it has a good charge. The phone will also shutdown at various times even when my wireless network is available, but not as quickly or as frequently. I know that it isn't the ROM as I tried a different ROM (after a complete wipe) and the problem persisted. I was wondering if these problems might be down to the battery finally giving up and not being able to provuide enough current to keep the phone on and that searching for a network is putting too much strain on the battery. I don't know if this is a common problem, but any advice will be very welcome. I am using the recommended radio for the ROM and the phone has been working properly and well for nearly a year since it was hacked. Phone does work fine when it is plugged in.
Many thanks
Ian

Did you do a Super Wipe ..?
you can find it here http://goo.gl/hWSCt
What is your radio version is it 12.65.60.29_26.14.04.28_M radio ..?
you can download it from here http://goo.gl/vdP8g
I think it is flashing issue.. and I recommend Android Revolution HD 6.3.3 for you because it is very stable ROM :good:

Before flashing a radio, exhaust all other options (that is if you don't have any experience flashing them). It isn't something to take lightly.
Sent from a dream.

I don't think it is a ROM problem as I did use Superwipe and I had the exact same problem with two entirely different ROMs. Android Revolution 7.0.4 and IceColdSandwich 8.1.1. I have been running 7.0.4 since it was first released by Mike. Also the phone acts normally when plugged in (sorry forgot to mention that in first post).
My Radio is: 12.65.60.29U_26.14.04.28_M

Go back to your stock ROM and see if the issues persist. If it still does, then it might be a hardware issue...if not, find a custom ROM that does not do it..

gizmo001i said:
I don't think it is a ROM problem as I did use Superwipe and I had the exact same problem with two entirely different ROMs. Android Revolution 7.0.4 and IceColdSandwich 8.1.1. I have been running 7.0.4 since it was first released by Mike. Also the phone acts normally when plugged in (sorry forgot to mention that in first post).
My Radio is: 12.65.60.29U_26.14.04.28_M
Click to expand...
Click to collapse
Dont use the superwipe script. Do a manual wipe. Wipe everything.
Take out the sd card, use a different one or backup your sd card, wipe it, DO NOT PUT THE FILES BACK IN, just a new rom to try to see if problem persists.
If it does, possibly it's a hardware issue.
Try all the different combinations, could be either a bad file in the sd card or a bad sd card and so on or what was mentioned before.
Sent from a dream.

[Q] CM10 getting very slow after flashing google apps

Hi Guys,
Every time I flash gapps package on any aosp based rom my phone becomes unbearably slow,
apps takes a very long time to start and boot takes more than 5 minutes to finish.
I've tried CM10,AOKP,CM10 Endeavor Unleashed and jellybam and all of them seems to have the same issue, also I tried flashing an older gapps version, and flashing many different kernels but nothing seems to fix the issue.
This issue didn't happen on stock based roms like ARHD or Renovate they run very smoothly and without any problem.
its driving me mad and I couldn't find anyway to fix it.
I'm running hboot 1.31 so if anyone could tell me how to fix this issue it would be very appreciated,
Thanks.

[Q] SlimBean 4.3 Help

First if this in the wrong please move. I figured this would be decent spot to post.
Okay so I have the SPH-l710 S3. I was runing 4.1.2 and decided to root my phone. Succesfuly did so. Now about a week after this I found out about the OTA 4.3 update. I had no option to install and learned that I had to be Untrooted to recieve the update. Could not find a stock rom and decided to give up since i am new to this and was unsure if may brick my phone.
I discovered SLim 4.3. I found a build 2 rom wich ran 4.3. This rom can be found at slimroms.net. SO I download it move to phone and reboot in recovery. Backed my stuff and factory reset my phone,. After doing so my phone was stuck on boot.The factory rest not only removed everything including apps and formatting the sd. COuldnt figure out why untill i went back to recovery and found my phone wiped everything. And I mean everything. I removed my sd card ,inserted it in my computer and moved the new rom over. Rebooted again and flashed the rom. My phone booted and was set up. I come to find that interface after this was changed from the stock s3 interface. Looks more like nexus or something. Is this Suppose to happen and why?
The big isuue and question is that my phone is randomly rebooting. I have extremely poor service( I have tried multiple modems And currently using a MK3 modem .not to mentiuon no original app sthat I had once before such as the stock Music app. So as far at that is concered is ther way to restore my phone back to the day I bought it? Or A rom of some sort to fix the uissue. Maybe a patch? Maybe a better 4.3 rom to try. By all means I love my new interface and what I can do to customize it. But these bugs among several other minor issues is bothing me.
Here ar my phone stats as of now:
Android 4.3.1
Baseband: L710VPUVMK3
Kernell: 3.4.66 Cyanogen mod-gcc086c4
Cpu: ARMv7 Proccessor 4(v7)
SLim Version: 4.3 build 2
Build number SLim_d2spr-userbug Jls361 1347 test keys
SElinux: Permssive(Whats this?)