Develop Bugs

[Q] Stuck on CM10 Nightly 12/10

Is there anything I can do?
So I installed the 12/10 Nightly of CM10 and I am stuck on this ROM. After about an hour all my application force close including Trebuchet. When I reboot into recovery, TWRP 2.3.1.1, I try to restore one of my backed up ROMs. It looks as though everything goes fine on the restore, but when I reboot system, I am still on the 12/10 Nightly of CM10.
I have tried re-installing TWRP, I have tried installing a new different ROM, I have tried re-rooting using odin, I have tried un-rooting using odin, I have tried installing CWM in a zip form and pushing it by command prompts and I am just about out of all options. I have also tried to install super su and uninstall and re-install superuser, thinking it might be that and no luck there either. I am not sure what to do.
Please help if you can.

Face_Melter said:
Is there anything I can do?
So I installed the 12/10 Nightly of CM10 and I am stuck on this ROM. After about an hour all my application force close including Trebuchet. When I reboot into recovery, TWRP 2.3.1.1, I try to restore one of my backed up ROMs. It looks as though everything goes fine on the restore, but when I reboot system, I am still on the 12/10 Nightly of CM10.
I have tried re-installing TWRP, I have tried installing a new different ROM, I have tried re-rooting using odin, I have tried un-rooting using odin, I have tried installing CWM in a zip form and pushing it by command prompts and I am just about out of all options. I have also tried to install super su and uninstall and re-install superuser, thinking it might be that and no luck there either. I am not sure what to do.
Please help if you can.
Click to expand...
Click to collapse
You shouldn't have too, but try formatting system before flashing.
And of course wipe cache and dalvik.
Best of luck,
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Brandon168 said:
You shouldn't have too, but try formatting system before flashing.
And of course wipe cache and dalvik.
Best of luck,
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I always wipe cache/dalvik, wipe system and factory reset before installing anything new.

try pulling the battery? try twrp 2.2.2.0? i had problems restoring w/ twrp 2.3.1.1. where i didn't have problems with a rom before but after restoring that same rom, i would run into rr and sod.
which cwm did you try to install? did you try sk8erwitskil's cwm? install over twrp, reboot recovery, and then install from there? if not, maybe try a different sdcard?

Face_Melter said:
Yeah I always wipe cache/dalvik, wipe system and factory reset before installing anything new.
Click to expand...
Click to collapse
I always do this. Wipe factory then system then cache then dalvik in that order and never had issue. I also went back to twrp2.2.20

merrygocow said:
try pulling the battery? try twrp 2.2.2.0? i had problems restoring w/ twrp 2.3.1.1. where i didn't have problems with a rom before but after restoring that same rom, i would run into rr and sod.
which cwm did you try to install? did you try sk8erwitskil's cwm? install over twrp, reboot recovery, and then install from there? if not, maybe try a different sdcard?
Click to expand...
Click to collapse
I have tried all versions of CWM and I have tried going back to twrp 2.2.2.0 and everytime I reboot I am still on 2.3.1.1. No matter what I do I still stuck on CM10 and twrp 2.3.1.1.
What could have happened? It seems as though nothing will flash properly.

This sounds like what happened to my 32GB SanDisk card; it turned read-only. Have you tried flashing a ROM? Maybe with CWM.
Sent from my Samsung SGH-T989 running CM10 by TeamChopsticks.

So I have read around to see what could be wrong. It sounds as though my phone is not writing to the nand. Is there anyway to fix that or no?

Have you tried restoring to stock Rom via Odin or flashing from a app that does it for you?
~~~~~~~~~~~~~~~~~~~~~
Samsung galaxy s2
Rom: Jedi knight 6
kernel: Jedi kernel 2
~~~~~~~~~~~~~~~~~~~~~
And you thought celebrities weren't smart! =P

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"

[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?

nwjimmy said:
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
Click to expand...
Click to collapse
Are you wiping system and data before flashing? This is most likely your issue.

zelendel said:
Are you wiping system and data before flashing? This is most likely your issue.
Click to expand...
Click to collapse
yes, cache and dalvik, and a factory reset.

nwjimmy said:
yes, cache and dalvik, and a factory reset.
Click to expand...
Click to collapse
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.

zelendel said:
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
Click to expand...
Click to collapse
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.

nwjimmy said:
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
Click to expand...
Click to collapse
No wiping the system doesnt format the data partition. Wipe system then format the data and then wipe the caches and then flash the rom.

Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
matt_schieman said:
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Agreed.
Double check your gapps and make sure uts the right version
sent from my 1920 overclocked note 2 running jedi xp12

What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

nwjimmy said:
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Most rom threads have a download link to the gapps that work with the version of android that specific rom is on. Look in the rom thread for the one you're currently running. There are different gapps for each android version (4, 4.1, 4.2)

I have that same problem too
I was trying to install new roms for my phone i tried liquid smooth and avatar and CM 10. I also tried install a new kernel and also different recoveries but nothing seems to work. I never "dirty" flashed and i use the right gapps. Someone please help me here i hate stock roms!

No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't work.

xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse

fig03 said:
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
That's a good point. You should be on TWRP 2.7.0.0 that's the latest version of that recovery.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, but it constantly froze, tried to reset, stuck with the same issue. Never used TWRP, so if someone could actually point me in the right direction, that'd actually be helpful.

xantechie said:
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, though...it doesn't really look the way I remember it last it worked, but it's had the issue so long, I forget what it actually looked like before.
Click to expand...
Click to collapse
I have no idea how to use TWRP...it only lists a .img file and no instructions on how to use it. zip files can be used from the bootloader or recovery. WTF am I supposed to do with an .img file. And it can't be to use the terminal emulator because to do that I would have to be able to get passed the Setup Wizard...which is the issue.

I finally figured it out with CWM. Thankfully. The phone would've went flying otherwise.
If anyone else stumbles upon this thread (so they can find the answer for CWM also), you have to format the device from the CWM Recovery to get rid of the crap that is blocking it. I did the following:
Once in CWM Recovery, Remove your SD card to avoid formatting it by accident.
Use the Volume Key to scroll to "mounts and storage".
Format all existing options (this is why the SD needed to be removed); this will blank out the phone's system which was causing the Setup issue to begin with.
Put your SD card with the ROM to be installed back into the phone.
Follow the guide as normal after this (install ROM, then reboot, then KK_gapps, then wipe the two caches, then reboot.)

4.3 issues

I have tried every method I can think of to get 4.3 to play nice with my phone. I have used Odin to flash stock and twrp, tried cwm recovery, tried beanstalk, hellybean, cm, and aokp. I changed twrp settings and infamous wipe. Everything I do always results with my phone getting stuck on the boot animation. Even if I clear caches, it will boot and get to the upgrading apps screen and then freeze and reboot and again stuck on the boot animation.
4.1.2 gets stuck on the kernel boot for me, 4.2.2 doesn't work with BT correctly. So frustrating.
Any suggestions are welcome.

4.3
dkrcubsfan said:
I have tried every method I can think of to get 4.3 to play nice with my phone. I have used Odin to flash stock and twrp, tried cwm recovery, tried beanstalk, hellybean, cm, and aokp. I changed twrp settings and infamous wipe. Everything I do always results with my phone getting stuck on the boot animation. Even if I clear caches, it will boot and get to the upgrading apps screen and then freeze and reboot and again stuck on the boot animation.
4.1.2 gets stuck on the kernel boot for me, 4.2.2 doesn't work with BT correctly. So frustrating.
Any suggestions are welcome.
Click to expand...
Click to collapse
Twrp 2.6.10 is the minimum. I am using 2.6.30. 2.6.00 will not work. Also wipe everything but SD. That includes android secure and preload.

stormannorman said:
Twrp 2.6.10 is the minimum. I am using 2.6.30. 2.6.00 will not work. Also wipe everything but SD. That includes android secure and preload.
Click to expand...
Click to collapse
Thanks, but I've tried all that.
Sent from my SGH-T989 using Tapatalk 4

dkrcubsfan said:
Thanks, but I've tried all that.
Sent from my SGH-T989 using Tapatalk 4
Click to expand...
Click to collapse
Twrp version 2.6.3.0 has bugs and is causing issues for a lot of people.
Make sure you use 2.6.1.0 and see how it goes.
Sent from my cellular telephone

kj2112 said:
Twrp version 2.6.3.0 has bugs and is causing issues for a lot of people.
Make sure you use 2.6.1.0 and see how it goes.
Sent from my cellular telephone
Click to expand...
Click to collapse
I have had Zero issues with 4.1 or 4.2 never bricked my phone---- until 4.3 I will tell you how i solved my problems - I have no boots, to 4.3 working but issues with data corruption and gapps crashing random apps crashing, finally after reading and reading i solved it.
1. Flash TWRP 2.6.1 (NOT 2.6.0, not 2.6.0.4 and especially NOT 2.6.3) any other recovery will not work properly - yes for some it may but some people seem to have some of the same problems.
2. Wipe data, Davlik, Cache and the prior rom. it has to be a clean wipe/flash
3. Flash Rom of choice (Black Liquid smooth is awesome)
4. Flash Standard gapps 08/13 (dont get fancy yet and flash slim gapps or inverted, just use the tried and true basic to get it working)
5. let the damn phone rest and settle 10 min minimum.
6. reboot to recovery, wipe Davlik and cache for good measure and fix permissions, reboot and enjoy.

dkrcubsfan said:
I have tried every method I can think of to get 4.3 to play nice with my phone. I have used Odin to flash stock and twrp, tried cwm recovery, tried beanstalk, hellybean, cm, and aokp. I changed twrp settings and infamous wipe. Everything I do always results with my phone getting stuck on the boot animation. Even if I clear caches, it will boot and get to the upgrading apps screen and then freeze and reboot and again stuck on the boot animation.
4.1.2 gets stuck on the kernel boot for me, 4.2.2 doesn't work with BT correctly. So frustrating.
Any suggestions are welcome.
Click to expand...
Click to collapse
if twrp keeps giving you problems like these maybe try doing it from cmw. ive read it gives way less problems than twrp:good:

Decimus Meridius said:
I have had Zero issues with 4.1 or 4.2 never bricked my phone---- until 4.3 I will tell you how i solved my problems - I have no boots, to 4.3 working but issues with data corruption and gapps crashing random apps crashing, finally after reading and reading i solved it.
1. Flash TWRP 2.6.1 (NOT 2.6.0, not 2.6.0.4 and especially NOT 2.6.3) any other recovery will not work properly - yes for some it may but some people seem to have some of the same problems.
2. Wipe data, Davlik, Cache and the prior rom. it has to be a clean wipe/flash
3. Flash Rom of choice (Black Liquid smooth is awesome)
4. Flash Standard gapps 08/13 (dont get fancy yet and flash slim gapps or inverted, just use the tried and true basic to get it working)
5. let the damn phone rest and settle 10 min minimum.
6. reboot to recovery, wipe Davlik and cache for good measure and fix permissions, reboot and enjoy.
Click to expand...
Click to collapse
This. 2.6.1.0 twrp.
Sent from my cellular telephone

Can't change rom to CM11 and can't wipe cache!

As the title states, I am unable to flash my CM10.2 or CM11 hercules ROM to my device. I have tried both CWM and TWRP and neither of them let me do it. This led me to wiping data, cache, etc. When I tried this, it wiped Data and System great (this is on TWRP, btw), But when it got to cache, it just sat there and continued trying, never finishing. I've looked all over the internet for solutions, I've tried the SuperWipes, I've tried updating kernel, and I've tried updating my radio, but it all leads to the same thing. When I try to flash CM10.2, it flashes great, but when I start it up, it's an infinite boot logo (you know, the arrow spinning around the head with "cyanogenmod"). Please if someone can help me please do. If I require downloading something, please provide a link to the best "something".

What version of twrp? You need 2.6.1.0.
And only use infamous wipes for 4.1.2 installs. Don't use darkside for anything. They are out dated.
Sent from my Nexus 5 using Tapatalk

kj2112 said:
What version of twrp? You need 2.6.1.0.
And only use infamous wipes for 4.1.2 installs. Don't use darkside for anything. They are out dated.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I'm running TWRP v2.6.3.1
Also, I've kinda already done that...

[Solved] D2LTE builds Stuck on Boot

Is anyone having an issue with the new D2LTE builds that have been built recently?
I have tried to flash a few (carbon and c-rom) and just get stuck at kernel splash page. I am on the newest TWRP(2.7), the lk3 modem/bootloader and wiped data,cache, dalvik, and reformatted my internal sd card.
If anyone else is experiencing this, what was done to resolve it?
Edit: I have now also tried
1. Restoring to original stock touchwiz 4.1.1
2. Wiping cache from original recovery
3.Rerooting
4.Restoring a backup of 4.3
5.Attempted to update to C-Rom, Carbonrom, Resurrection Remix -- No Luck Fails

Corvetrims77 said:
Is anyone having an issue with the new D2LTE builds that have been built recently?
I have tried to flash a few (carbon and c-rom) and just get stuck at kernel splash page. I am on the newest TWRP(2.7), the lk3 modem/bootloader and wiped data,cache, dalvik, and reformatted my internal sd card.
If anyone else is experiencing this, what was done to resolve it?
Click to expand...
Click to collapse
I'd like to know myself. I'm stuck too. I can flash a 4.3 rom and everything works, but when I reboot, it gets stuck. All was fine until I flashed Wicked rom and flashed " MJ2 bootloader MJB" Now every time I reboot it gets stuck. Also If I try a reflash, the only way to get it to bootup is to format before flashing.

Try using Philz Touch as your recovery program.

audit13 said:
Try using Philz Touch as your recovery program.
Click to expand...
Click to collapse
I had cwm when I originally started out, switched to twrp to see if the recovery was the issue.

I assume you were running the latest version of cwm before you switched to twrp so it can't be the recovery.
Are you doing a full wipe of the system, cache, data, and Dalvik before installing the ROM?

Yea every time I wiped data, cache, dalvik , I even reformatted once. I have managed to boot up into tasl650AOKP which is a d2lte build but no other ROMs. I mean at this point it looks like I should just wait a bit to see if it is something with the ROMs interacting with my phone(as per all phones are made different)
Sent from my d2lte using Tapatalk

Are you wiping the system before installing? Have you tried wiping system, dalvik, data, cache, install the rom, wipe and re-install the same ROM a second time without trying to boot the ROM in between the 1st and 2nd ROM install?

audit13 said:
Are you wiping the system before installing? Have you tried wiping system, dalvik, data, cache, install the rom, wipe and re-install the same ROM a second time without trying to boot the ROM in between the 1st and 2nd ROM install?
Click to expand...
Click to collapse
Yeah I gave it a shot still no dice. I keep seeing other people having similar issues, so I am still leaning it has to do with the differences in d2lte builds vs dtatt builds
Sent from my d2lte using Tapatalk

d2att ROMs are okay? Just not any d2lte?

audit13 said:
d2att ROMs are okay? Just not any d2lte?
Click to expand...
Click to collapse
As I stated before I am able to boot int Task650AOKP(Which is a d2lte build), any of the others that I have tried have not worked. There are some updates out today, I am going to attempt again and post back results.

As a test, I flashed my i747m back to stock 4.1.2 via Odin. I then installed the latest version of Philz Touch for the d2lte and installed the d2lte version of Validus. Validus booted without any problems.
Edit: just tried the lastest nightly Pac-Rom and Resurrection ROM. Both ROMs had no problem booting to the desktop.

audit13 said:
As a test, I flashed my i747m back to stock 4.1.2 via Odin. I then installed the latest version of Philz Touch for the d2lte and installed the d2lte version of Validus. Validus booted without any problems.
Edit: just tried the lastest nightly Pac-Rom and Resurrection ROM. Both ROMs had no problem booting to the desktop.
Click to expand...
Click to collapse
Thanks for the help, I actually was just able to boot into C-Rom by following the same steps except I am using TWRP. No idea really what caused the Roms to get stuck on boot. Quite annoying.

I had TWRP on my phone but I was having problems installing ROMs when I first got the phone in January.As soon as I switched to CWM or Philz, no problems at all except for ROMs based on a stock 4.3 ROM.