Hi guys
I'm Jimmy from Vietnam, if you guys have any questions, plz contact to me: [email protected]
I have been searching some threads also forums for supporting ROM, but result is zero !
So today, I will post a thread for supporting ROM.
mobiistar touch LAI 504 is clone version of Celkon A119q
specs
I am S-Mod of mobiistar forum. And I have published some ROMs for this phone
-- LAI 504 in my our forum --
The newest ROM: Lewa OS 5
LeWa just released Lewa OS 5 (29/09/13) for some mtk6589 device. so I port to LAI 504 immediately
Lewa OS really awesome !
really really smotth and stable
original thread
Download ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
============Lewa OS 5==============
============Xperia C Full features==============
My current ROM, and i think i will only use this ROM. It's Xperia C ported
as you guys may knew, SONY just released Xperia C for China with specification same with touch LAI 504
so i ported Xperia C ROM for TL504.
This ROM really awesome with all SONY Xperia features. Try it once
ROM Download: here
Xperia Logo: Flash it if you need
Screenshoot: here
original thread: here
ROM Info
Xperia Launcher
EN/CN Language only
Xperia Widget: Weather, Toglle On- Off…
Xperia Walkman + Album
Xperia Statusbar
Xperia Framework
Xperia SystemUI
Xperia Bootanimation
Xperia Z Lockscreen
Xperia Animation
Xperia Dialer
Xperia Apps: Live wallpaper, TrackID…
Pre-ROOOTED
Gapps included
Support init.d script
V6 Supercharger
CRT-ON
Gapps updated
Support Dual SIM (Only show Card 1 Signal)
[*] ROM Bugs:
Compass doesn't work
============================
1. Galaxy OS
2. Galaxy S4UI
3. LewaOS
4. Xperia Z Style
5. Stock ROM Official
Download Stock ROM from needrom.com
Next, it's CWM, CWM use for installing custom ROM:
Download here
=============================================
1. Galaxy OS
[*] Download: http://d-h.st/uvf
[*] ROM Info
Galaxy S4 UI
Multi Language: EN/VI/CN...
Pre rooted
Multi battery percent
Settings >> Engineermode
Statusbar style change
Flash Player support 4.2.x
Gapps lastest
Transparent windowbackground
Transparent caller background
Tweak: v6 supper charger
Tweak 3G, Wifi...
CRT Screen off
More and more
ROM Screenshoot: Plz see my thread here
2. Galaxy S4UIThis ROM UI really like S4
Download: http://d-h.st/OIY
[*] ROM Info
Only work with SIM 1 slot
S4 lockscreen
Slide to call and message in Contact list
Camera updated to 13 Mpx - 5Mpx
Multi lang
Plz see my post: Video and screenshoot
3. Lewa OS
[*] ROM Download: http://d-h.st/66Z
[*] ROM Info
Full LewaOS features
Full odexed >> optimize boot speed
many more...
ROM Screenshoot
4. Xperia Z Style
[*] ROM Download:http://d-h.st/1qb
[*] ROM Info
Some Xperia Features
Bravia Engine
Xloud, Clear phase
Walkman + Album
Launcher + Widget
And many more
ROM Screenshoot
That's all
Don't forget to hit thanks button =))
Good Work . . . . .
Hi Jimmy
Gr8 work. All having Celkon A119q would benefit from your hardwork.
I also posses a Celkon A119q.
Presently I am working on a ROM with DUAL SIM working & full SIV features such as Full Touchwiz, Air gestures, Swipe in call log to call & message, SIV lock screen, SIV Samsung App Hub, Samsunng S-Voice, Samsung Adapt Sound, Stock Video player with Floating window etc etc.... Trying to add on it Smart Play/Pause in video player like SIV & few other features. Would upload it once done..( IF AT ALL I AM ABLE TO DO IT)
Attaching a few screenshots:::
Good job !
hi bro
you are very good !
Plz contact to me: [email protected]
Good jod,Thank Minhdangoz
Forum Mobiistar.vn :smartphone Lai 504
Good job guy! :good:
Thank you much I have this phone.....much appreciated thread!!!!:thumbup:
Sent from my Nexus 7 using Tapatalk 4
Unable to flash Cmw recovery with Mobileuncletools, it simply cant read the recovery.img
Any ideas ?????
CWM
pcoruganti said:
Unable to flash Cmw recovery with Mobileuncletools, it simply cant read the recovery.img
Any ideas ?????
Click to expand...
Click to collapse
Use the lastest Mobile Uncle Tool, make sure that your phone aready rooted and grant permission
If not, plz use SP Flashtool to flash CWM
I rooted the phone and grant access to mobileuncletools still no go.... Using SP flashtool the battery needs to be removed, which I don't feel confident.......
Sent from my Nexus 7 using Tapatalk 4
nice
looks like amazing, ill try this one.
thanks!
Support
pcoruganti said:
I rooted the phone and grant access to mobileuncletools still no go.... Using SP flashtool the battery needs to be removed, which I don't feel confident.......
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
First of all, you will need Official Stock ROM and SPFT ( SP Flash Tool) to Flash ROM or a part of ROM (CWM, boot, logo...)
I have recored a Video how to use SPFT, you can see on Youtube
http://www.youtube.com/watch?v=Nv3_JqIC4Hc
1. Remove PIN out of the phone
2. Run Flashtool.exe >> Choose Scatter...txt on Stock ROM Folder
3. Remove Checksum.ini on Stock ROM (because stock recovery.img file will different CWM Recovery)
4.Only tick recovery if you want to flash CWM Recovery. Tick all to flash whole ROM.
5. Click Download
6. Without the PIN, connect USB Cable with your computer
7. Insert PIN later
8. Open Device Manage to check mt65xx Driver
9. Update Driver
10. See the Flashtool RUN
If success you will get notic
good luck!
minhdangoz94 said:
First of all, you will need Official Stock ROM and SPFT ( SP Flash Tool) to Flash ROM or a part of ROM (CWM, boot, logo...)
I have recored a Video how to use SPFT, you can see on Youtube
http://www.youtube.com/watch?v=Nv3_JqIC4Hc
1. Remove PIN out of the phone
2. Run Flashtool.exe >> Choose Scatter...txt on Stock ROM Folder
3. Remove Checksum.ini on Stock ROM (because stock recovery.img file will different CWM Recovery)
4.Only tick recovery if you want to flash CWM Recovery. Tick all to flash whole ROM.
5. Click Download
6. Without the PIN, connect USB Cable with your computer
7. Insert PIN later
8. Open Device Manage to check mt65xx Driver
9. Update Driver
10. See the Flashtool RUN
If success you will get notic
good luck!
Click to expand...
Click to collapse
Do I need to shut down the phone while doing this ??
---------- Post added at 06:04 AM ---------- Previous post was at 05:39 AM ----------
pcoruganti said:
Do I need to shut down the phone while doing this ??
Click to expand...
Click to collapse
Can I flash the whole rom ( S4 custom ) usingthe SP flash tools instead of CWM because im not able to flash this in two ways tried....
pcoruganti said:
Do I need to shut down the phone while doing this ??
---------- Post added at 06:04 AM ---------- Previous post was at 05:39 AM ----------
Can I flash the whole rom ( S4 custom ) usingthe SP flash tools instead of CWM because im not able to flash this in two ways tried....
Click to expand...
Click to collapse
Oh my god !
Did you read careful my guide?
I said you have to remove the PIN first
Read it more carefully... felling angry
I did try that. You did not mention whether the phone has to switched off or not
Sent from my Celkon A119Q using Tapatalk 4
---------- Post added at 08:48 AM ---------- Previous post was at 08:46 AM ----------
minhdangoz94 said:
Oh my god !
Did you read careful my guide?
I said you have to remove the PIN first
Read it more carefully... felling angry
Click to expand...
Click to collapse
It gives me error regarding port verify failure.. But its able to read the port connected.
Sent from my Celkon A119Q using Tapatalk 4
New ROM released
I just realeased S4UI Dual SIM Support and SONY Xperia C
http://diendan.mobiistar.vn/threads/cap-nhat-galaxy-s4ui-dual.15546/
http://diendan.mobiistar.vn/threads/rom-cua-sony-xperia-c-tren-tl504.16064/
I think Xperia C ported to A119Q is best ROM now
re
pcoruganti said:
I did try that. You did not mention whether the phone has to switched off or not
Sent from my Celkon A119Q using Tapatalk 4
---------- Post added at 08:48 AM ---------- Previous post was at 08:46 AM ----------
It gives me error regarding port verify failure.. But its able to read the port connected.
Sent from my Celkon A119Q using Tapatalk 4
Click to expand...
Click to collapse
Without the PIN, it's mean your phone was off.
You haven't use SPFT?
minhdangoz94 said:
Without the PIN, it's mean your phone was off.
You haven't use SPFT?
Click to expand...
Click to collapse
I haven't.. I have always flashed with cwm. When I tried with sp flash tool. It says invalid port.
Sent from my Celkon A119Q using Tapatalk 4
Sucess Story to Help
Hello Friends,
Disclaimer: Please be informed I am not a developer or an expert in Android, Just a Gadget Freak and would like to test multiple things.
First I was concerned to use SPFT using my new A119Q. However I have succeeded after 7 hours of struggle with the help of XDA forums and Google. Below is the step by step guide how I flashed my Phone with S4 UI enclosed in this POST.
1. Root your Phone using the link provided in Youtube Video posted by nikhil udgata
2. Download the CWM recovery from the first page of this post and place it in the root of your SD card
3. Rename the CWM_LAI to recovery.img [DO NOT USE CAPS] - Learnt it hard way
4. Download the ROM from the list in the first page you would like to Flash.
5. Rename the Zip file to Update.zip
5.Download Mobile Uncle Tools from Play Store [FREE]
5. Flash your recovery using the MobUncle
6. On successful flash, press OK to reboot into recovery [this will reboot into CWM recovery you just flashed]
7. Install the ROM From CWM as you would do any ROM... Wiping Cache etc etc before Installing.....
8. Please make sure to select the update from external SD card [Learnt it after multiple tries]
9. Patience is Key from here, wait for your phone to reboot into the ROM you just Flashed ..
TA DA...... Now I have S4 UI in my Celkon A119Q:good:
syeitha said:
Hello Friends,
Disclaimer: Please be informed I am not a developer or an expert in Android, Just a Gadget Freak and would like to test multiple things.
First I was concerned to use SPFT using my new A119Q. However I have succeeded after 7 hours of struggle with the help of XDA forums and Google. Below is the step by step guide how I flashed my Phone with S4 UI enclosed in this POST.
1. Root your Phone using the link provided in Youtube Video posted by nikhil udgata
2. Download the CWM recovery from the first page of this post and place it in the root of your SD card
3. Rename the CWM_LAI to recovery.img [DO NOT USE CAPS] - Learnt it hard way
4. Download the ROM from the list in the first page you would like to Flash.
5. Rename the Zip file to Update.zip
5.Download Mobile Uncle Tools from Play Store [FREE]
5. Flash your recovery using the MobUncle
6. On successful flash, press OK to reboot into recovery [this will reboot into CWM recovery you just flashed]
7. Install the ROM From CWM as you would do any ROM... Wiping Cache etc etc before Installing.....
8. Please make sure to select the update from external SD card [Learnt it after multiple tries]
9. Patience is Key from here, wait for your phone to reboot into the ROM you just Flashed ..
TA DA...... Now I have S4 UI in my Celkon A119Q:good:
Click to expand...
Click to collapse
Root of SD card should be what folder??? For placing recovery. Img
Sent from my Celkon A119Q using Tapatalk 4
pcoruganti said:
Root of SD card should be what folder??? For placing recovery. Img
Sent from my Celkon A119Q using Tapatalk 4
Click to expand...
Click to collapse
Root of SD card means directly on the SD card and not any folders. example: If you are using windows to place this file.... and if the SD card drive is E: place it directly as E:/recovery.img
if its not on the root folder Mobile uncle will not detect the recovery.img
And for all users.. who wants to know how to use SPTF [On/OFF]... Pin in Vietnamese means Cell. so you have to remove the battery.. which is obviously off
Related
HELLO AGAIN ALL MY FELLOW galaxy y USERS
Till day before yesterday I had some paranoid thoughts regarding overclocling ... but finally came did some logical thinking and decided to overclock sgy (running Hyperion 8)
As it was my first oc I decided to follow this great guide made by
BiswajitBarman
http://forum.xda-developers.com/showthread.php?p=33879798
Although it is a really nice guide it didn't work properly on Hyperion 8 . I also searched many other guides and videos regarding this but none of them really worked 100% (although one guide did work almost perfectly on Hyperion 7 it failed to work on h8)
Following were the bugs I was experiencing
*root access denied by super su
*unable to underclock below 1.2 ghz
*link to SD problems and root denied
*random reboots
*hot reboot doesn't work and screen freezes if u hit on it and had to pull battery etc etc
So after a whole day of research, trial and error, some suggestions from deadly and others, bricking unbricking flashing via Odin etc etc I finally deviced a fully working easy guide with no bugs to flash meeruk kernel 2.5 on h8 and overclock it to 1.2Ghz :victory:
All the problems stated above are eliminated by this method except for the hot reboot function
Phone still freezes if u hit on it but the reboot works just fine and the phone doesn't take that long to reboot either (about 30seconds )
Other than that no other bugs afaik
NOTE- ALTHOUGH THE METHOD WAS DESIGNED FOR HYPERION .... IF U ARE HAVING SOME PROBLEMS WITH OC ON ANY OTHER ROM ... TRY THIS METHOD IT MAY WORK IF IT (IF IT DOESNT U CAN TELL UR PROBLEM ALONG WITH THE ROM NAME HERE (NOT PM) AND ME IR SOMEONE HERE WILL TRY TO HELP
OK to the procedure now (it may be long but its easy and works perfectly
Note that if u do not follow my instructions properly bricking is guaranteed (or it may not work properly)
THINGS U NEED
superuser.apk (use only this super user)
Kernel Update.zip
Merruk technology2.0.tar
Elite modules.zip
Ext4-Converter-signed.zip
I assume u already have root explorer installed on ur phone (flashing stock is not really necessary but ur choice)
INSTALLATION PROCEDURE
Part 1
*download the paste all the files given above and paste it in the root of your SD card
*copy the super user.apk and paste it in \system\apps\here and set permissions to rw-r-r using root explorer
*now in the same place where u pasted superuser.apk search for the super su.apk (or any other equivalent that u were using) and delete it
*reboot phone
*now open superuser
*go to settings and UNCHECK outdated binary notification
*do not update the version of superuser I provided
Part 2
*go to SD card in root explorer and search for the MerrukTechnology_Pre-2.0.tar I u just downloaded and extract it (hope u pasted all downloaded files directly in SD)
*u will get the boot.img (before that make sure u do not have any other boot.img on the root of ur SD)
*now boot into cwm
*make a backup (imp)
Part 3
*now go to mounts and storage make sure system,data,SD,cache,sdext all are mounted (if not mount them all)
*go back and hot install zip from SD and select the kernel update.zip
*it search for boot.img and install it
*after that go back and check if everything is mounted (this time its 100% necessary that all are mounted so mount them all if they are not mounted)
*now go back and choose install zip from SD and choose Ext4_Converter-signed.zip
*after success wait for a while (30 secs) and hit back (if u get an error, pull battery boot into recovery and do the part 3 again but its unlikely that u will get one)
*now wipe cashe (marok recommends this)
*reboot system
*if u enter a boot loop, awesome go to part 4
If u do not enter a boot loop and if ur system boots..! Something has gone wrong do part 3 again
Part 4
*pull battery and boot to recovery
*u will notice u r in meeruk kernal's cwm recovery
*mount everything
*go rom backup and restore and simply restore the backup u just made
*trust me ur old kernel will not be restored and u will still have meeruk kernel 2.5
*after everything is restored reboot
*u should phone should boot now
*wait and if u r in a boot loop do 3,4 parts again (its unlikely if u followed my procedure carefully)
Part 5
*after phone is booted and all media scanning is complete
*set ur require settings in CPU controle and Chek apply on boot and apply
*u may NOT get a notification saying CPU control has been granted super user permission but it says values applied ... that's fine
*reboot to recovery
*mount everything
*choose zip from SD
*select 1-EliteKernelModules.zip
*reboot system after completion
*now after boot u will notice that link to SD ,CPU control and all root apps are asking superuser permission (lol) grant them
*NOTE- ALWAYS SET MINIMUM FREQUENCY TO 312 MHz (this eliminates random reboots)
* and enjoy
The over clock works like charm for me with the following settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and I can play games like air penguin, subway surfers,raging thunder 2 and many more without lag and without cf3d... I also player armv6 ported nfs shift with just texture reduced without lag
Thanks to marok os for such awesome work on the kernel
pleez consider donating to sir MAROC OS so he can make the kernel even better
=========HOLO-UBUNTU========theme
Also guys overclock only when needed ie while playing games etc or it may cause reboots (although not very often)
=========HOLO-UBUNTU========theme
This worked....thanks for sharing this.....
Nice to know
=========HOLO-UBUNTU========theme
hey sanny,if i have successfully flash the kernel,can i update the superuser?
Sent by a Schoolar Boy Question? Better go to [Help Thread] by Deadly
Droid_beginner_student said:
hey sanny,if i have successfully flash the kernel,can i update the superuser?
Sent by a Schoolar Boy Question? Better go to [Help Thread] by Deadly
Click to expand...
Click to collapse
Hmm OK I'm not but u can try ... btw use only super user not super su and other equivalents ...
Also this superuser is the best free version right now
Lol even I'm surprised at how crazy the guide seems
=========HOLO-UBUNTU========theme
sanny5 said:
Hmm OK I'm not but u can try ... btw use only super user not super su and other equivalents ...
Also this superuser is the best free version right now
=========HOLO-UBUNTU========theme
Click to expand...
Click to collapse
hmm,i prefer supersu actually..
okay then,i'm starting to flash nao
Sent by a Schoolar Boy Question? Better go to [Help Thread] by Deadly
There is a reason why I asked u to replace supersu ... don't use it with this kernel and rom together... u will completely mess up
Added- r u using nemesis???
=========HOLO-UBUNTU========theme
sanny5 said:
There is a reason why I asked u to replace supersu ... don't use it with this kernel and rom together... u will completely mess up
Added- r u using nemesis???
=========HOLO-UBUNTU========theme
Click to expand...
Click to collapse
okay boss,good news here,flawlessly flashed and working
and yes,i'm using "banned custom rom",im a criminal
to do nao,backup,and then try to update binary
Sent by a Schoolar Boy Question? Better go to [Help Thread] by Deadly
Droid_beginner_student said:
okay boss,good news here,flawlessly flashed and working
and yes,i'm using "banned custom rom",im a criminal
to do nao,backup,and then try to update binary
Sent by a Schoolar Boy Question? Better go to [Help Thread] by Deadly
Click to expand...
Click to collapse
I feel both happy and sorry for u
=========HOLO-UBUNTU========theme
Only bug I found doing this was wifi hotspot no longer works either from the rom settings or by using my normal 3rd party app foxfi
update - fixed by reflashing stock wifi driver
marcussmith2626 said:
Only bug I found doing this was wifi hotspot no longer works either from the rom settings or by using my normal 3rd party app foxfi
update - fixed by reflashing stock wifi driver
Click to expand...
Click to collapse
thanks,i just realized that too
btw sanny,thanks for feel sorry to meh
and check ur pm please
Sent by a Schoolar Boy Question? Better go to [Help Thread] by Deadly
So iv tested this for a day now and my findings are as follows
installation - no problems installing
root - works fine
random restarts -none
phone freezes - quite a few times
lag - when loading apps phone stays on black screen for a while sometimes
bugs - when in phone call & screen turns off it will not turn on again through use of proximity sensors and hard to turn back on with buttons it's a bit hit & miss
when phone is in deep sleep or been off a while when you wake it the screen flashes on & off again and takes a few attempts to keep on
recommendations - stay on hells fusion #50 with ext4 file system
to install hells fusion #50 from merruk
Goto cwm
make sure system is mounted
flash hells fusion #50 (just step 2 install hells fusion)
Restart to recovery
goto advanced restore
restore system (you only need to restore system not data boot or cache) from nandriod backup you did before you you flashed merruk
restart
failing to restore system will mean you will not have root
Lol u just reported ur issues with the kernel
If u have issues with guide or non kernel related bugs after installation (like root access denied etc) report here ..
If u have issues with kernel report to the kernel dev
U should know that the kernel is not a stable oc and the Dev is working really hard to make it more stable for us
So instead of suggesting different kernels (against rules) y don't u encourage the dev by appertaining his hard work
And this is one and the only oc kernel that is there for sgy right now! !! Do u want to loose that development too?
Pleez be supportive to devs here
=========HOLO-UBUNTU========theme
I'm afraid to overclock 1,2Ghz, what effect after overclocking.....? effect positive n negative...
:good:
Well even though there is a popular misconception that oc reduces the durability of the processor ... I dont think its entirely true
because ur phone is not constantly running on the Max frequency ... it only uses wat is needed
Also the processors are tested to run very much beyond the specified frequency without frying up.. well atleast good processors are tested like that
Samsung has used a good processor itself in all its phones so oc will not fry up the processor
However it may or may not reduce the life of processor of phones of local campanies like micomax etc
Also reat the previous post (the post above yours
=========HOLO-UBUNTU========theme
After tried your steps in hyperion in about phone it says merruk kernel....but i am seeing only two frequency values in cpu control which 312 and 832....what i have done wrong????? Can u tell me plz...
Sent from my GT-S5360 using Tapatalk 2
Suresh9488 said:
After tried your steps in hyperion in about phone it says merruk kernel....but i am seeing only two frequency values in cpu control which 312 and 832....what i have done wrong????? Can u tell me plz...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Reflash the kernel - make sure system is mounted before you flash
marcussmith2626 said:
Reflash the kernel - make sure system is mounted before you flash
Click to expand...
Click to collapse
Still no luck.....same thing
Sent from my GT-S5360 using Tapatalk 2
---------- Post added at 05:31 PM ---------- Previous post was at 04:52 PM ----------
Is sdcard ext4 is compulsary to flash the kernel.....????
Sent from my GT-S5360 using Tapatalk 2
Suresh9488 said:
Still no luck.....same thing
Sent from my GT-S5360 using Tapatalk 2
---------- Post added at 05:31 PM ---------- Previous post was at 04:52 PM ----------
Is sdcard ext4 is compulsary to flash the kernel.....????
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Yes its compulsory! !!
Now obvious that u didn't follow my steps :sly:
=========HOLO-UBUNTU========theme
First, I will write what is necessary, so read carefully! Please forgive my english.Check a new version 7 update in post #63 onward.THIS IS NOT MY ROM, I DONT CREATE THIS. I'M JUST ONLY ACCELERATING THE PROCESS OF UPDATING. NOW ALL CREDITS ARE FOR THE TEAM AND BLU PRODUCTS! So you thank its for this in official website:
http://www.bluproducts.com/ ---- http://www.facebook.com/BLU.Products?ref=ts&fref=tsARE SHOWING THAT REALLY ARE A SERIOUS COMPANY AND GREAT GLOBALLY.
The credits for this tutorial is not for me. Are for developers and people who help and become a team for continuous improvement. XDA site for this; Mario Doce; williegomezt; BHARDIK; shahulakthar and all the people who contribute spontaneously.
The following steps must be performed carefully, I do not know if I will update with backup made by CWM. So many beginners, the experienced should know the risks of losing the phone using SPFT. But the process is very simple.
If you do not know how to use SPFT, I suggest taking the phone and the files to a technical assistance to execute this process.
For beginners: create a specific folder for all files and unzip! Do not worry about losing the IMEIs. It has tutorial for that too.
Before doing anything you need for all drivers SP Flash Tool function properly and install the ROM. I've them had and use Win XP. Some W8/W7 users need to update or install the drivers correctly. See this: MediaTek DA USB VCOM driver for MT6577. **If you already have it, forget it.
Check this for more drivers MT6577. Download your version for SO (W8/W7/Vista/XP )--> [TUT] Instructions MTK6577 USB VCOM Driver Installation
Here's a simple tutorial SP Flash Tool: [TUT]MTK Android (Sp flash tool ) tutorial
1º - Download SP_Flash_Tool_exe_v3.1224.01 and INSTALL drivers: VIVO 4.3 Tool 20130322.rar ---> Just give two clicks in [ Install.bat ] and the drivers will be installed automatically. ------>>> mirror: VIVO 4.3 Tool 20130322.rar
Download driver chipset MTK6577 recognition on the computer after using SP Flash Tool here.
2º - Now everything ready to install ROM JB 4.1.1, download: BLU_D910i_V06_GEN_T8113_20130322_CWM.rar ---->>> mirror: BLU_D910i_V06_GEN_T8113_20130322_CWM.rar
To confirm the whole process steps must plug your phone WITHOUT THE BATTERY when put in USB.
Follow the steps according to the pictures! ----->>>> Android Flash tool Instruction:
I. OPEN FOLDER SP_FLASH_TOOL_v3.1224.01
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
II. USB SETTING --> CHOOSE USB MODE
III. CLICK SCATTER-LOADING, CHOOSE RELATIVE FILE FOLDER EDITION’S SCATTER FILE --->> nº4 - click OK
IV. CLICK FORMAT, MAKE SURE THAT ITs ON THE THIRD CHOICE ---> Put USB in phone WITHOUT THE BATTERY!!
AFTER THE GREEN CIRCLE SELECT TO DOWNLOAD FIRMWARE -> UPGRADE TO DOWNLOAD THE SOFTWARE
FINISH --- UPGRADE JB READY!!
Remove USB, and put the battery Turning on the phone. Placing initial information and BE HAPPY.
Please moderators, I read about putting external links to paid apps [When you cheat a software developer, you cheat us as a community]. I checked that the apps are free and presented was the only way to accomplish the ROOT.
If this is your decision, I may edit or remove if necessary. Thank you for patience too. It's a my first Thread.
ROOT BLU VIVO 4.3 D910i - ROM JB 4.1.1
This is the place to do ROOT --->> IS VERY EASY PROCESS.
IF YOU WANT TO ROOT, GO TO THIS OTHER TUTORIAL --------- >>> [TUT] HOW TO ROOT BLU VIVO 4.3 D910i - ROM JB 4.1.1
Remember: I am not responsible for your actions.
REPLACE IMEI in ROM JB 4.1.1
PLEASE.
Before placing any tutorial, I warned about accomplish backup of IMEIs. Do not blame me if he did not.
Look at it after reading the topic ROOT. ---->>> [TUT] HOW REPLACE IMEI in ROM JB 4.1.1 - BLU VIVO 4.3 D910i
If you lost IMEIs did not backup or copy. There are other ways to get them:
Watch it here and thank the rua1 --- >>> MTK Droid & Root Tools v2.4.3
MTK Droid & Root Tools v2.4.3 is the same process of putting IMEI's.
Guys, check for new version 7 update in post #63 onward.
U rocks,how u got this file?
how is the camera quality.
Sent from my A90S using xda app-developers app
shahulakthar said:
U rocks,how u got this file?
how is the camera quality.
Sent from my A90S using xda app-developers app
Click to expand...
Click to collapse
NOT VERY GOOD. BUT HAVE A PANORAMA. But, after I download Camera 360 v4 is best too.
-------------------------
PLEASE SHAHUL...TEST IF DOWNLOAD OK or NO.... REPLAY THIS...
I don't have fast internet access now.
Take sometime tonight when I reach home I will update.
Sent from my A90S using xda app-developers app
Hi, lopestom. Thnx for tutorial.
Link for download ROM JB 4.1.1, download: BLU_D910i_V06_GEN_T8113_20130322_CWM.rar does not work for me.
Got the error 500 from Google "That’s an error.There was an error. Please try again later. That’s all we know."
sn0vvman said:
hi, lopestom. Thnx for tutorial.
Link for download rom jb 4.1.1, download: Blu_d910i_v06_gen_t8113_20130322_cwm.rar does not work for me.
Got the error 500 from google "that’s an error.there was an error. Please try again later. That’s all we know."
Click to expand...
Click to collapse
------------------------- >>>> There is also question other users are downloading. Please be patient until I upload in other server.
Dev host ----------->>> upgrade links
--------------------------
Check download mirrors please.........
Really nice i guess u have to make note what i sent u in PM plz cuz many user here dont know that how to restore/write IMEI in their Device
SPFT Firmware Downloading finished after 2-3 Hours cuz have very slow internet connection dear
Thanks
Hardy Ahir
removed.
Thanks n thanks n thanks a ton downloaded and installed this rom after flashing its boot up very nicely and yes it is JB . Realy very excited to have Jelly bean on my Micromax a90s. Thanks to u all for ur hard work . Cheers
Obrigado
Obrigado for the tutorial, @lopestorm.
Do you know where can I grab the update for D910a? :good:
Thanks!
Valeu @Lopestom, bora fazer agora no celular!
Thanks! :good:
You are awesome man! works perfectly on my micromax a90s, now rooted too. Thanks a ton, clicking the thanks button on all your posts on this thread so far.
Só I think execute this. But problem is a frequency for modem. I do no in D910a. I have only D910i.
Sent from my VIVO 4.3 using xda app-developers app
You did a great work. mainly the tutorial, its spot on.:good: I just flashed by following ur easy tutorial.
Many Thanks to lopestom for tutorial and Blu Vivo for creating a very nice ROM,
Mainly I like 3 Features.
1.Power saver app. which will be activated when battery is below 15%
2.One Clean app. It is a task killer with widget in home screen.
3,Finally Torch app.
My initial review is they update to JB at its best.
And Its time for Megamax Rom.
Can you please tell what's the use of "theme skin"? I can't find any extra themes there other than the default one...
lopestom said:
Só I think execute this. But problem is a frequency for modem. I do no in D910a. I have only D910i.
Sent from my VIVO 4.3 using xda app-developers app
Click to expand...
Click to collapse
Ok.. so, any idea about how to change the modem after updating to have 850/1900 frequencies?
lopestom said:
First, I will write what is necessary, so read carefully! Please forgive my english.
THIS IS NOT MY ROM, NOT THAT I WAS MADE. I'M JUST ACCELERATING THE PROCESS OF UPDATING. NOW ALL CREDITS ARE FOR THE TEAM AND BLU PRODUCTS! So you thank its for this in official website:
http://www.bluproducts.com/ ---- http://www.facebook.com/BLU.Products?ref=ts&fref=tsARE SHOWING THAT REALLY ARE A SERIOUS COMPANY AND GREAT GLOBALLY.
The credits for this tutorial is not for me. Are for developers and people who help and become a team for continuous improvement. XDA site for this; Mario Doce; williegomezt; BHARDIK; shahulakthar and all the people who contribute spontaneously.
The following steps must be performed carefully, I do not know if I will update with backup made by CWM. So many beginners, the experienced should know the risks of losing the phone using SPFT. But the process is very simple.
For beginners: create a specific folder for all files and unzip! Do not worry about losing the IMEI's. It has tutorial for that too.
Before doing anything you need for all drivers SP Flash Tool function properly and install the ROM. I've had them and use Win XP. Some Win8 and Win7 users need to update or install the drivers correctly. See this: MediaTek DA USB VCOM driver for MT6577. **If you already have it, forget it.
Here's a simple tutorial SP Flash Tool: [TUT]MTK Android (Sp flash tool ) tutorial
1º - Download SP_Flash_Tool_exe_v3.1224.01 and INSTALL drivers: VIVO 4.3 Tool 20130322.rar ---> Just give two clicks in [ Install.bat ] and the drivers will be installed automatically. ------>>> mirror: VIVO 4.3 Tool 20130322.rar ---> MIRROR 2
Download driver chipset MTK6577 recognition on the computer after using SP Flash Tool here.
2º - Now everything ready to install ROM JB 4.1.1, download: BLU_D910i_V06_GEN_T8113_20130322_CWM.rar ---->>> mirror: BLU_D910i_V06_GEN_T8113_20130322_CWM.rar --- > MIRROR 2
To confirm the whole process steps must plug your phone WITHOUT THE BATTERY when put in USB.
Follow the steps according to the pictures! ----->>>> Android Flash tool Instruction:
I. OPEN FOLDER SP_FLASH_TOOL_v3.1224.01
II. USB SETTING --> CHOOSE USB MODE
III. CLICK SCATTER-LOADING, CHOOSE RELATIVE FILE FOLDER EDITION’S SCATTER FILE --->> nº4 - click OK
IV. CLICK FORMAT, MAKE SURE THAT ITs ON THE THIRD CHOICE ---> Put USB in phone WITHOUT THE BATTERY!!
AFTER THE GREEN CIRCLE SELECT TO DOWNLOAD FIRMWARE -> UPGRADE TO DOWNLOAD THE SOFTWARE
FINISH --- UPGRADE JB READY!!
Remove USB, and put the battery Turning on the phone. Placing initial information and BE HAPPY.
Please moderators, I read about putting external links to paid apps [When you cheat a software developer, you cheat us as a community]. I checked that the apps are free and presented was the only way to accomplish the ROOT.
If this is your decision, I may edit or remove if necessary. Thank you for patience too. It's a my first Thread.
Click to expand...
Click to collapse
Finally Guys
JB on my A90s ( Actually now its Blu Vivo 4.3 )
i have to clear something here for A90s users
here in this tutorials says u have to format first bootloader with NVdata but i said no A90s user plz skip this steps cuz otherwise u lost your device IMEI permanently ............ u guys think now then hows gonna JB boot up ??
Thats why m here i want to clear that things that JB boot up still even u skip that STEPS and direct just coose firmware upgrade after loading scatter files
Profit is u never loose your Device IMEI data
Thanks
Hardy AHir
BHARDIK said:
Finally Guys
JB on my A90s ( Actually now its Blu Vivo 4.3 )
i have to clear something here for A90s users
here in this tutorials says u have to format first bootloader with NVdata but i said no A90s user plz skip this steps cuz otherwise u lost your device IMEI permanently ............ u guys think now then hows gonna JB boot up ??
Thats why m here i want to clear that things that JB boot up still even u skip that STEPS and direct just coose firmware upgrade after loading scatter files
Profit is u never loose your Device IMEI data
Thanks
Hardy AHir
Click to expand...
Click to collapse
Thanks for that,
* I just followed steps sent. What you say is good, and I do not know if it works well. I will test too.
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed GAPPS since it's size was too large to upload with the ROM but that too is uploaded as patch in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery.
Clockwork Mod Recovery
Good news, CWM recovery is now available for Canvas 4, here is the thread to download it, I have already tested it and it works, just copy to SD Card, then flash with Mobile Uncle Tools..
Or see the full tutorial here.
As soon as you flash CWM recovery, enter it and Make a nandroid backup of your phone only then try this ROM.
WARNING/Disclaimer -
Flash on your own responsibility. I do not own this phone so am not able to test it.
I am not responsible if you brick your device!
Only Advanced people who can recover from soft bricks are recommended to flash this!
Click to expand...
Click to collapse
Flashing Instructions:
Download the Zip files given below then place the zip file in SD Card
Reboot to CWM recovery
Wipe Data/Factory Reset
Wipe Cache
Install zip from SD Card and Select the ZIP file given here
Install GAPSS Patch given here
Goto-Advanced and Clear Dalvik Cache
Reboot...
Done and enjoy:good:
Click to expand...
Click to collapse
Credits to droidiser for providing the download link.
Original ROM link
Click to expand...
Click to collapse
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM (Updated)
GAPPS Patch
No need to replace script anymore, i have updated the ROM's zip file and re-uploaded...
I have fixed the Updater script, so now you can flash this zip through CWM.
You just need to replace the updater-script & update-binary in the Downloaded zip file with the ones attached.
How-To:
Download the ROM's zip file, then open with WinRar
Goto-> META-INF -> com -> google -> android -> and there you will see the old updater-script
Now download the new updater script & update-binary attached here, extract both to your computer then drag it to this location of the zip file, In the message that appears, click OK you are done.
Now you can flash the Zip file as mentioned above.
flash in Canvas HD
hi Bro, can I flash this stock rom of Canvas 4 in my Canvas HD??
Not tested on Canvas HD, but you can give it a try since both phones have exactly same hardware including the chipset.. but make sure you make a Nandroid backup of your phone and then try this..
Flashing instructions would be:
Download and copy zip to sd card
Reboot to CWM recovery
Wipe Data/Factory reset
Wipe Cache
Goto mounts & storage and format System
Goto advanced and clear dalvik cache
Apply zip from sd card and flash this rom
Once done, clear dalvik cache again
Reboot
All the best let me know what happens... :good:
Sent from my Micromax A110 (Canvas 2) using xda developers app
CWM Recovery for CANVAS 4 A210
ibshar said:
Not tested on Canvas HD, but you can give it a try since both phones have exactly same hardware including the chipset.. but make sure you make a Nandroid backup of your phone and then try this..
Flashing instructions would be:
Download and copy zip to sd card
Reboot to CWM recovery
Wipe Data/Factory reset
Wipe Cache
Goto mounts & storage and format System
Goto advanced and clear dalvik cache
Apply zip from sd card and flash this rom
Once done, clear dalvik cache again
Reboot
All the best let me know what happens... :good:
Sent from my Micromax A110 (Canvas 2) using xda developers app
Click to expand...
Click to collapse
Hello,
I just saw this today only It was reported that there is no custom recovery. I do not know whether it is available here and did not google it. I used "MTK tool and obtained the recovery image and I am porting here both the custom recovery and Patched up boot.img files provided by the MTK Droid tool 2.4.8.
It may be useful for cooking custom Roms. The CWM provided is 5.5.0.4.. You. have to flashed through SP Flashable Tool by ticking only the recovery. and again only boot.img the remaining items except preloader has to unticked.
After Rooting with Zen701hd root tool I used the MTK Droid tool 2.4.8 to Re-Root the phone and istall the Super Su as the Zen tool only rooted the p;hone and failed to install the super user. Latter I updated it with Update 1.51 SuperSu. My phone is superbly functioning.
When I ported the zip file XDA server says no security token and I could not port it I am Porting the url. here
https://docs.google.com/file/d/0B6mi3aQy8tz9MldBYUlCdkxIRW8/edit?usp=sharing
https://docs.google.com/file/d/0B6mi3aQy8tz9XzhyZmFmQUtqWVk/edit?usp=sharing
---------- Post added at 09:46 AM ---------- Previous post was at 09:18 AM ----------
ibshar said:
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed NFSS_EADRM apk since it's size was too large to upload with the ROM but will soon upload that too in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery, but unfortunately there is no custom recovery available for Canvas 4 yet, hopefully you can use it once it's out.. For now only advanced users may use it through fastboot.
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM
Click to expand...
Click to collapse
Hello,
I am getting error zero when I flashed this Rom and == ( Error status 0).
Any further guidance please.
Regards,
Could you take a logcat of the error please and post it here..
Sent from my Micromax A110 (Canvas 2) using xda developers app
IMEI Vanished
ibshar said:
Could you take a logcat of the error please and post it here..
Sent from my Micromax A110 (Canvas 2) using xda developers app
Click to expand...
Click to collapse
I have downloaded and used the custom firmware.
I used the MTK tool to root and install custom recovery.some weeks before.
When I installed this rom soft brick happened to my phone, it could not boot. It stopped for nearly 30 minutes in the boot lago. Then I used the Customback up to restore my phone.
This is my experience.
My IMEI also vanished. Somehow I could restore the IMEI by copy and paste procedure using the Root explore of the Device/nvram file.
May be is it because I was having 5.5.0.4 recovery as installed by the MKDroid Tool 2.4.8 or by any other means.
Any similar experience.
ibshar said:
Could you take a logcat of the error please and post it here..
Sent from my Micromax A110 (Canvas 2) using xda developers app
Click to expand...
Click to collapse
How to take a log cat and port here I am just a learner. Please .
send from Spice Mi- 535
puduraja said:
How to take a log cat and port here I am just a learner. Please .
send from Spice Mi- 535
Click to expand...
Click to collapse
Hi, I think i found the cause of the error you got. No need for logcat, can you just tell me the mount partitions for /system directory. It needs to be updated in the updater-script of the zip file.
Use this for reference: http://forum.xda-developers.com/showthread.php?t=2377989
mount partitian
ibshar said:
Hi, I think i found the cause of the error you got. No need for logcat, can you just tell me the mount partitions for /system directory. It needs to be updated in the updater-script of the zip file.
Use this for reference: http://forum.xda-developers.com/showthread.php?t=2377989
Click to expand...
Click to collapse
Dear Brother,
It is to big for me to digest and follow. I can us the MkDroid tool to get the block. It is ok. I am not finding any fault with the Rom. I narrated my experience. Many user of the phone is like me. Just I attempted and failed. I will send you the Droid tool block copy to night when
I am free.
Thanks
puduraja said:
Dear Brother,
It is to big for me to digest and follow. I can us the MkDroid tool to get the block. It is ok. I am not finding any fault with the Rom. I narrated my experience. Many user of the phone is like me. Just I attempted and failed. I will send you the Droid tool block copy to night when
I am free.
Thanks
Click to expand...
Click to collapse
Actually all i need is for you to open terminal emulator or through ADB to run the following commands and post the result here.
Commands:
Code:
mount
Code:
cat /proc/partitions
:good:
ibshar said:
Actually all i need is for you to open terminal emulator or through ADB to run the following commands and post the result here.
Commands:
Code:
mount
Code:
cat /proc/partitions
:good:
Click to expand...
Click to collapse
Dear Brother,
Find below the attached terminal emulator output.
At this time of mount I am in stock Rom . Rooted with Zentool and by MTK DROID TOOL. SUPERSU was updated from 1.51
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my A210 using xda app-developers app
You need to add a space after cat command then /proc/partitions
Sent from my Canvas 2 using XDA Developers App
ibshar said:
You need to add a space after cat command then /proc/partitions
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Please find the log cat as desired by you.
Sent from my A210 using xda app-developers app
Sorry but still dont see the mapping.. can u also post the output of:
ls -l /
Sent from my Canvas 2 using XDA Developers App
ibshar said:
Sorry but still dont see the mapping.. can u also post the output of:
ls -l /
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Please find the log. Sorry I just get time only on Sundays.
Sent from my A210 using xda app-developers app
CWM Recovery for canvas 4
ibshar said:
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed NFSS_EADRM apk since it's size was too large to upload with the ROM but will soon upload that too in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery, but unfortunately there is no custom recovery available for Canvas 4 yet, hopefully you can use it once it's out.. For now only advanced users may use it through fastboot.
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM
Click to expand...
Click to collapse
CWM Recovery for Canvas 4 Here
http://forum.xda-developers.com/showthread.php?t=2412817
Hi,
Can we use A116 Custom rom for Canvas 4 ? it is possible ?
Thanks
puduraja said:
Please find the log. Sorry I just get time only on SundaysView attachment 2195282.
View attachment 2195285
Sent from my A210 using xda app-developers app
Click to expand...
Click to collapse
Thanks, got what i needed,I will upload the modified file tomorrow.. And it seems there is a working CWM recovery available, so users are advised to make a nandroid backup of the system before flashing this rom.
puduraja said:
Please find the log. Sorry I just get time only on SundaysView attachment 2195282.
View attachment 2195285
Sent from my A210 using xda app-developers app
Click to expand...
Click to collapse
I have fixed the installation script, read the first post and download the new updater-script, follow the instructions and it will work.. Let me know how it goes.. :good:
ibshar said:
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed NFSS_EADRM apk since it's size was too large to upload with the ROM but will soon upload that too in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery.
Clockwork Mod Recovery
Good news, CWM recovery is now available for Canvas 4, here is the thread to download it, I have already tested it and it works, just copy to SD Card, then flash with Mobile Uncle Tools..
Or see the full tutorial here.
As soon as you flash CWM recovery, enter it and Make a nandroid backup of your phone only then try this ROM.
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM
I have fixed the Updater script, so now you can flash this zip through CWM.
You just need to replace the updater-script in the Downloaded zip file with this one: Updater-Script
How-To:
Download the ROM's zip file, then open with WinRar
Goto-> META-INF -> com -> google -> android -> and there you will see the old updater-script
Now download the new updater script given above, and drag it to this location of the zip file, In the message that appears, click OK you are done.
Now you can flash the Zip file as mentioned above.
Click to expand...
Click to collapse
I couldnt flash your rom in my Micromax canvas 4 (A210)... it says Update aborted..... Plz help me.. I messed up with my camera and i cant get it back.. please upload working rom...
First to flash CM11 rom...you need to unlock bootloader..
warning it will void warranty...
1) if u dont care on warranty then go here to unlock bootloader...if u have already unlocked bootloader then skip this
http://forum.xda-developers.com/showthread.php?t=2484622
2)now download firmware of Xperia M[c1905] from here
http://www.mediafire.com/download/0vihmssmiicn2hu/C1905_15.1.C.2.8_CE.ftf
[36mb just for baseband and partition]
if u want full c1905 ftf here
https://mega.co.nz/#!wRQEnaCL!R4TC7hp0rSDoAbq57iqOLHIYJJZGRD6dsU7gM9KRKmM
Filesize:581mb ...if u r using mobile to download try using uc cloud download in ucbrowser...
download any 1 of top 2...ur wish and
flash this using flashtool...
3)now flash CM11 as in original CM11 thread instruction..
http://forum.xda-developers.com/showthread.php?t=2584956
for new users of android the instruction is
1.extract boot.img from ROM Zip
2.copy the zip to your sdcard1[means ur external memorycard]
2.flash the boot.img using fastboot or flashtool's fastboot
3.now switch phone ON...now enter cwm by pressing vol up or down when the led glows on sony logo at starting...
4.Wipe data and cache partition
5.now use option install zip then in that choose zip from storage sdcard1
6.search rom zip and flash it...
7.flash gapps...and reboot
thats it..enjoy CM11
NOTE:You can only use a single sim...
i m having dual with cm11 installed..
Thanks for ur excellent guides!
Keep on ur works for M dual...
Sent from my C2004 using Tapatalk
500 mb !!
is there another way
am using 3g connection and its so expensive
15.1.c.1.17
sorry wrong upload
update: 15.1.c.2.8
you can download this just 34mb, i just remove the system, flash this with flashtool, after that flash the boot.img from cm11, but in order to flash cm11 you must edit the updater script
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
delete that selected text
credit : aerialus kaskus for 15.1.c.1.17 firmware
desktop_hacker said:
500 mb !!
is there another way
am using 3g connection and its so expensive
Click to expand...
Click to collapse
k here edited http://www.mediafire.com/download/0vihmssmiicn2hu/C1905_15.1.C.2.8_CE.ftf
36mb
flash this and flash cm..or look in 1st posted...edited
Doubts
ansebovi said:
First to flash CM11 rom...you need to unlock bootloader..
warning it will void warranty...
1) if u dont care on warranty then go here to unlock bootloader...if u have already unlocked bootloader then skip this
http://forum.xda-developers.com/showthread.php?t=2484622
2)now download firmware of Xperia M[c1905] from here
http://www.mediafire.com/download/0vihmssmiicn2hu/C1905_15.1.C.2.8_CE.ftf
[36mb just for baseband and partition]
if u want full c1905 ftf here
https://mega.co.nz/#!wRQEnaCL!R4TC7hp0rSDoAbq57iqOLHIYJJZGRD6dsU7gM9KRKmM
Filesize:581mb ...if u r using mobile to download try using uc cloud download in ucbrowser...
download any 1 of top 2...ur wish and
flash this using flashtool...boot phone once...
3)now flash CM11 as in original CM11 thread instruction..
http://forum.xda-developers.com/showthread.php?t=2584956
for new users of android the instruction is
1.extract boot.img from ROM Zip
2.copy the zip to your sdcard1[means ur external memorycard]
2.flash the boot.img using fastboot or flashtool's fastboot
3.now switch phone ON...now enter cwm by pressing vol up or down when the led glows on sony logo at starting...
4.Wipe data and cache partition
5.now use option install zip then in that choose zip from storage sdcard1
6.search rom zip and flash it...
7.flash gapps...and reboot
thats it..enjoy CM11
NOTE:You can only use a single sim...
i m having dual with cm11 installed..
Click to expand...
Click to collapse
Good afternoon ansebovi.
You FW has a bug? is 100% functional? the main support sdcard1?
I have an Xperia M dual C2004 not think to change the way memory
Any idea or solution? please!
Gioosousa said:
Good afternoon ansebovi.
You FW has a bug? is 100% functional? the main support sdcard1?
I have an Xperia M dual C2004 not think to change the way memory
Any idea or solution? please!
Click to expand...
Click to collapse
1st u should not quote whole op in ur reply...
edit and delete
2nd..its not mine...
the c1905 is sony's stock firmware unedited...
and cm11 is by ron....u should ask there for bug...
i just gave guide how to get cm11 work in dual thats all..
in c1904/c1905 both can be swapped their internal with external[there are guides search in xperia m threads]
but cm11 is same as dual fw...[u cant move apps to sd without using gl2sd and link2sd]
Good work mate, just Too bad only one sim card is usable, i'll wait for the real CM 11 for xperia M dual, if there is any
Sent from my C2005 using xda app-developers app
ansebovi said:
k here edited http://www.mediafire.com/download/0vihmssmiicn2hu/C1905_15.1.C.2.8_CE.ftf
36mb
flash this and flash cm..or look in 1st posted...edited
Click to expand...
Click to collapse
i love u man u are my hero ..... I owe you one
What SIM-card working, №1 or №2 ?
Bonoboo said:
What SIM-card working, №1 or №2 ?
Click to expand...
Click to collapse
Of-course No.1 will work.
36mb just for baseband and partition
ansebovi said:
First to flash CM11 rom...you need to unlock bootloader..
warning it will void warranty...
1) if u dont care on warranty then go here to unlock bootloader...if u have already unlocked bootloader then skip this
http://forum.xda-developers.com/showthread.php?t=2484622
2)now download firmware of Xperia M[c1905] from here
http://www.mediafire.com/download/0vihmssmiicn2hu/C1905_15.1.C.2.8_CE.ftf
[36mb just for baseband and partition]
if u want full c1905 ftf here
https://mega.co.nz/#!wRQEnaCL!R4TC7hp0rSDoAbq57iqOLHIYJJZGRD6dsU7gM9KRKmM
Filesize:581mb ...if u r using mobile to download try using uc cloud download in ucbrowser...
download any 1 of top 2...ur wish and
flash this using flashtool...
3)now flash CM11 as in original CM11 thread instruction..
http://forum.xda-developers.com/showthread.php?t=2584956
for new users of android the instruction is
1.extract boot.img from ROM Zip
2.copy the zip to your sdcard1[means ur external memorycard]
2.flash the boot.img using fastboot or flashtool's fastboot
3.now switch phone ON...now enter cwm by pressing vol up or down when the led glows on sony logo at starting...
4.Wipe data and cache partition
5.now use option install zip then in that choose zip from storage sdcard1
6.search rom zip and flash it...
7.flash gapps...and reboot
thats it..enjoy CM11
NOTE:You can only use a single sim...
i m having dual with cm11 installed..
Click to expand...
Click to collapse
[36mb just for baseband and partition] <- what it realy means?... sorry for asking... it means no apps at all? just calling and texting?
kalitos2013 said:
[36mb just for baseband and partition] <- what it realy means?... sorry for asking... it means no apps at all? just calling and texting?
Click to expand...
Click to collapse
It only includes the dependencies of CM. There's no need to flash the whole thing as it will get replaced with CM.
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
36mb just for baseband and partition
Antrikos48 said:
It only includes the dependencies of CM. There's no need to flash the whole thing as it will get replaced with CM.
right... what is the dependencies of CM?... What CM means?...
well, is possible to tell me if at least I can make calls and text with this 36mb firmware?...
Let me see if I get it: this is a normal firmware, but only with the basic stuff like call, text, and thats it,... right?
Click to expand...
Click to collapse
kalitos2013 said:
Antrikos48 said:
It only includes the dependencies of CM. There's no need to flash the whole thing as it will get replaced with CM.
right... what is the dependencies of CM?... What CM means?...
well, is possible to tell me if at least I can make calls and text with this 36mb firmware?...
Let me see if I get it: this is a normal firmware, but only with the basic stuff like call, text, and thats it,... right?
Click to expand...
Click to collapse
1- This is needed because CM11 (That you're going to flash) is based on Xperia M firmware.
So you have to this to be able to use sim and wifi on your Xperia M Dual
2- What CM means? How you are supposed to flash it if you don't know what does it mean !?
Check here the official website: CyanogenMod
3- Yes you can make call and text after you flash (This 36MB firmware) then flash CM rom.
Small notice: This guide with made to explain how to flash CM11 on Xperia M dual :laugh:
Click to expand...
Click to collapse
36 mb thing
Mysteryagr said:
kalitos2013 said:
1- This is needed because CM11 (That you're going to flash) is based on Xperia M firmware.
So you have to this to be able to use sim and wifi on your Xperia M Dual
2- What CM means? How you are supposed to flash it if you don't know what does it mean !?
Check here the official website: CyanogenMod
3- Yes you can make call and text after you flash (This 36MB firmware) then flash CM rom.
Small notice: This guide with made to explain how to flash CM11 on Xperia M dual :laugh:
Click to expand...
Click to collapse
Well, answering to number 2: I always root phones when needed, but obviously I don't know everything and / or some expressions
But thanks for help!
Click to expand...
Click to collapse
Have you seen this: http://www.cyanogenmod.org/blog/this-week-in-cm-mar-14-2014 , dual sim users ?
iks8 said:
Have you seen this: http://www.cyanogenmod.org/blog/this-week-in-cm-mar-14-2014 , dual sim users ?
Click to expand...
Click to collapse
Finally!!!
Great news:good:
Amazing
Guys, Could we now ask FXP team to support Xperia M dual?
We won't need to flash single sim firmware anymore!
If i flash the firmware to c1905, can i flash any rom to c1905? i know that it will only works sim 1.
i want CWM11 working with both sim ,anyone have a idea plz provide a tuts for it plz plz plz .................
--- I or XDA is not responsible for bricked or dead phones . Use at ur own risk ---
NOTE 4 ROM FOR CANVAS 4 A210
FEATURES
-Latest Android 4.4.2
-Amazing Battery Backup
-Playing Games Smoothly
-Buttery Smooth
-Lollipop Recent Panel
-3G SIM Switch
-Sim Toolkit
-Latest Playstore
-New LockScreen
-New Dialer
-New Contacts
-New Messages
and many more
BUGS
-SOME TOUCHWIZ FEATURES AREN'T WORKING
-CAMERA NOT WORKING[WIP]
- REPORT IF FOUND
INSTRUCTION:-
-DOWNLOAD ROM.ZIP ANMD PLACE IT INSIDE SD CARD .
-BACKUP ALL UR APPS AND DATA
-BOOT INTO RECOVERY[USE CWM RECOVERY OR PHILZ RECOVERY]
-WIPE FACTORY RESET , FORMAT SYSTEM ,WIPE CACHE AND DALVIK CACHE
-INSTALL ZIP FROM SDCARD
-INSTALL ROM.ZIP
-FLASH SUPERUSERSU.ZIP
SCREENSHOT:-
-Post#2
DOWNLOAD:-
https://drive.google.com/file/d/0B8Qh6m4Nlzu6MzZVSWI3cWVWZnM/view?usp=sharing
-SUPERUSER. ZIP
Flash it via Recovery:
http://download.chainfire.eu/696/Sup...erSU-v2.46.zip
or this,
Download Kingroot.apk from google and root using that.
Thanks for links @polidelz
CREDITS:-
[email protected] (for his ROM)
[email protected] (For porting to A116)
[email protected]math (For kitkat rom for canvas 4)
[email protected] (For helping )
[email protected]_010(For porting to A210)
HIT THANKS IF U LIKE MY WORK
GAMERBOY
:good:
XDA:DevDB Information
NOTE 4 ROM FOR CANVAS 4 A210, ROM for the Micromax Canvas 4 A210
Contributors
gamerboy_010
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: MICROMAX CANVAS 4 A210
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2015-05-07
Created 2015-05-06
Last Updated 2015-05-06
Screenshots
Guys here is a camera patch for note 4 rom . Try and report whether it works or not . Backup ur boot in recovery cuz this patch can may result in bootloop . No need to backup everything just backup ur boot in recovery . Link below [Link updated . New Patch added]
https://drive.google.com/file/d/0B--n8nx6hOGDZFJSUUowbGUwSjg/view?usp=sharing
Reserved
There is no imei issue in this rom. For those who need to restore imei using mobile uncle tool everytime they install a new custom, just follow the easiest way described below.
STEPS:--
1. Make sure you have rooted your mobile and have root explorer installed or similar in your mobile phone.
2. Next download this tool=http://www.4shared.com/archive/ss4A23VB/IMEI_windows.html
3. Open a command prompt
-Press SHIFT+RMB(Right mouse button)
-open command window here.
-press enter
-A black window will appear with writing
-Enter the following text:
imei.exe <15digit_IMEI_1> <15digit_IMEI_2>
You can use a valid IMEI or IMEI generator to generate random IMEI's using this toolhttp://www.4shared.com/file/zhEXB80K/uig.html
(eg: imei.exe 123456789111111 123456789111111)
4. Press Enter*
If both IMEI you gave are in correct format the file named MP0B_001_NEW will*
be created. Now you can put it on the sd and insert that in to the phone.
Run root explorer
Copy it to - system need r/w need to be on:*
/data/nvram/md/NVRAM/NVD_IMEI/MP0B_001
and make sure you rename the file "MP0B_001_NEW" to " MP0B_001"
And finally REBOOT your phone.
Credit: @qmobilea2(for sharing on xda) @gamerboy_010(for posting here )
wow !!! deal went Respect !!!)
Screenshots not showing.
Edit: It would be easy if you put the Screenshots in another tab, since this is a DevDB thread.
guess, this is going to be a busy week for all
zxczxcdani said:
Screenshots not showing.
Edit: It would be easy if you put the Screenshots in another tab, since this is a DevDB thread.
Click to expand...
Click to collapse
Added
gamerboy_010 said:
Added
Click to expand...
Click to collapse
Thanks. Great ROM. Can I ask what are those touchwiz features that don't work as of the moment?
zxczxcdani said:
Thanks. Great ROM. Can I ask what are those touchwiz features that don't work as of the moment?
Click to expand...
Click to collapse
I din noticed any as it was written on the thread frm whr i ported. One thing i found is tht when u click on taskmanager button frm recentpanel it opens setting instead of opening taskmanager. Check it out and report.
gamerboy_010 said:
I din noticed any as it was written on the thread frm whr i ported. One thing i found is tht when u click on taskmanager button frm recentpanel it opens setting instead of opening taskmanager. Check it out and report.
Click to expand...
Click to collapse
Okay, got it. Thanks
Very nice work bro. I hope you can fix all issues to make this ROM fully working. :good:
For me IMEI is the hardest thing to do. Im very nood at it when it comes to fix IMEI.
Hoping for stable ROM.
Thanks, gamerboy_010.
For having a new ROM on our device.
polidelz said:
For me IMEI is the hardest thing to do. Im very nood at it when it comes to fix IMEI.
Hoping for stable ROM.
Thanks, gamerboy_010.
For having a new ROM on our device.
Click to expand...
Click to collapse
Thr is no imei issue in this rom. If u need to backup imei everytime u flash a new rom thn do the steps mentioned in post#3.
gamerboy_010 said:
Thr is no imei issue in this rom. If u need to backup imei everytime u flash a new rom thn do the steps mentioned in post#3.
Click to expand...
Click to collapse
Maybe you should rephrase that IMEI bug thing. Or just don't list it there.
EDIT: Wait, why do I have to flash a SuperSU zip? This rom is pre-rooted right?
zxczxcdani said:
Maybe you should rephrase that IMEI bug thing. Or just don't list it there.
EDIT: Wait, why do I have to flash a SuperSU zip? This rom is pre-rooted right?
Click to expand...
Click to collapse
Where you read that this ROM is pre-rooted?
FSadino said:
Where you read that this ROM is pre-rooted?
Click to expand...
Click to collapse
Other users (on the A116) said that they lost their root access when they flashed SuperSU zip. Dunno, that's why I'd like this root issue to be confirmed.
i guess 0.8 is pre-rooted and 0.9 is not...
zxczxcdani said:
Other users (on the A116) said that they lost their root access when they flashed SuperSU zip. Dunno, that's why I'd like this root issue to be confirmed.
Click to expand...
Click to collapse
This rom is nt prerooted thts why i said flash supersu.zip. Flash it and enjoy.
gamerboy_010 said:
This rom is nt prerooted thts why i said flash supersu.zip. Flash it and enjoy.
Click to expand...
Click to collapse
Hmm. Okay. Thanks, it would be nice if you provide a link on OP for that SuperSU zip
I think this would be helpful if i posted it here.
Flash it to Recovery:
http://download.chainfire.eu/696/Sup...erSU-v2.46.zip
or this,
http://www.androidpot.net/download?a...3/kingroot.apk