Related
I've been looking for the past few hours and now I'm starting to get nervous --- i've read tons of threads with people having something like my problem and I've done everything suggested and still no luck, starting to freak out a bit haha. Hooked my phone up this morning, everything was as normal. Plug it in, USB option comes up, worked perfectly. The only thing I did with my phone was go on a long car ride and charged it using an adapter to a house charger. Im assuming that somehow that screwed it up since it was being converted. This sounds strange to me but its my only idea. I can't connect, the second I plug in my phone it starts to charge (and for some reason the light doesn't come on when it usually does).
Things I've tried =
-Reset phone/computer
-Reflashed latest Calks
-Tried 4 different cables (along with all computers USB ports)
-Reinstalled Samsung drivers
-Reflashed stock
-System restore of computer
--------
Other than completely wiping my phone of everything I don't know what else to try. Any suggestions/help would be greatly appreciated! Thanks for your time.
Try booting on recovery and enable USB mount, if you still don't have access to the phone then very likely your USB port is damaged. This will discard any issues with the ROM
Another thing you could try is to get the phone to another computer, the computer should recognize it even without drivers if you enable USB storage mode or at the very least make the unknown device show up on the device manager. If it shows up then you know for sure your computer is the problem, if not, well then it is your phone.
fenixjn said:
Try booting on recovery and enable USB mount, if you still don't have access to the phone then very likely your USB port is damaged. This will discard any issues with the ROM
Another thing you could try is to get the phone to another computer, the computer should recognize it even without drivers if you enable USB storage mode or at the very least make the unknown device show up on the device manager. If it shows up then you know for sure your computer is the problem, if not, well then it is your phone.
Click to expand...
Click to collapse
I even went so far as to format my netbook and start fresh, still didn't work --- just got it set back up...
My girlfriend just got home with her computer and it's not recognizing it at all. When I go into settings>Wireless> USB Utilities, it doesn't even recognize that my cable is connected (even though its charging)
I didn't know there was anything like Force USB Mount in recovery so I'm going to do that right after I type this post
This is really frustrating :O haha so I guess if your suggestion doesn't work, whats the easiest way to un-root return to stock so I can stop by the Sprint store tomorrow? I talked to a rep that roots his phones and he said as long as it says Gingerbread 2.3.6 they'll take it back (I guess they don't look at the custom counter)
Any other suggestions? (Thanks fen)
Thanks for the idea but the force mount through CWM didn't work ... Gave me a little hope by popping up on my pc for two seconds but then disappeared. Yeah so looks like my next option is to return to stock and get me a new one?
AVAH0LIC said:
Thanks for the idea but the force mount through CWM didn't work ... Gave me a little hope by popping up on my pc for two seconds but then disappeared. Yeah so looks like my next option is to return to stock and get me a new one?
Click to expand...
Click to collapse
Odd... so the phone popped on windows and then disconnected immediately? That would indicate that physically the port is fine but logically something is going on... (unless you moved the cable).
Well if that is the case then you could either try to diagnose the issue yourself OR try to get the phone replaced somehow.
Another idea... have your tried download mode?
Im on the same boat delete the drivers from your computer the actual usb drivers not the samsung ones that worked for me the update them again. I have a dv7 hp. It works at times but somethimes it says error connect to a high speed usb
Sent from my SPH-D710 using Tapatalk
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
n01un0 said:
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
Click to expand...
Click to collapse
Ive never done anything like that just rom flashes --- but its worth a shot ---- only problem is ##8878# doesn't do anything on mine??? You sure thats the right dial code?
fenixjn said:
Odd... so the phone popped on windows and then disconnected immediately? That would indicate that physically the port is fine but logically something is going on... (unless you moved the cable).
Well if that is the case then you could either try to diagnose the issue yourself OR try to get the phone replaced somehow.
Another idea... have your tried download mode?
Click to expand...
Click to collapse
Sorry I was in a hurry when I typed that --- let me clarify.
Honestly I did so much tinkering last night that I don't remember exactly how i got it to do it. But after playing with the mounts in CWM, I eventually started up my phone and the USB logo came up in the Notif bar --- (MTP Inititaed - or whatever that is) but after clicking the icon nothing happened and eventually just went away
n01un0 said:
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
Click to expand...
Click to collapse
Just by playing around with those numbers you gave me I found it to be ##8778# bringing up the USB -AP/CP/ALL menu --- which one is it supposed to be set as?
EDIT*** It was on AP... tried the other two options, resetting phone in between both of them and still no luck --- have an appt to go to the sprint store tomorrow ---
Because I can't get the phone to connect... I don't suppose there is a way to flash unroot is there --- I've already flashed modem kernal and stock rom --- went into ES and deleted Superuser... the only way you can tell that my phone has been messed with is that CWM still pops up when you do the Volume+poweron... any suggestions?
Thanks again for the suggestions everyone I really appreciate them
AVAH0LIC said:
Just by playing around with those numbers you gave me I found it to be ##8778# bringing up the USB -AP/CP/ALL menu --- which one is it supposed to be set as?
EDIT*** It was on AP... tried the other two options, resetting phone in between both of them and still no luck --- have an appt to go to the sprint store tomorrow ---
Because I can't get the phone to connect... I don't suppose there is a way to flash unroot is there --- I've already flashed modem kernal and stock rom --- went into ES and deleted Superuser... the only way you can tell that my phone has been messed with is that CWM still pops up when you do the Volume+poweron... any suggestions?
Thanks again for the suggestions everyone I really appreciate them
Click to expand...
Click to collapse
I am having the same issue. However, my phone is stock. Do you know what was the culprit?
Get insurance on it wait a few weeks, say you lost it and pay the $100 for the replacement. Keep the lost one for parts. Or sell it on ebay for parts. This is if you can't fully get back to stock.
Sent from my SPH-D710 using xda premium
I never did get a confirmation kn exactly what the problem was. As stated above i just deleted super user and flashed a stock everything and just prayed they wouldn't check for cwm which they didn't.
Im assuming my charging port burnt out. I used multiple different cables, including LG HTC stock Samsung and some Verizon one. But i think what finally did it was using the Verizon one in the car with a really old adapter. I don't understand why this would cause a problem but i really believe it did. That Verizon cable even acts weird with this new phone like it says charging but led light randomly turns on and off.
Im confused as to what happens to that old phone if you ever lose it. I lost a phone along time ago when I was drunk, but instead of claiming insurance i was eligible for upgrade. What possibly could have ended up happening with that old phone? Somebody found a paper weight? Or was somebody able to flash it and use it?
I guess the condensed version of my question is what happens to a found phone after device has been reported lost?
Sent from my oh-so-sexy Samsung!
Download a ek02 full tar put it on sd card and use mobile Odin to flash...you can use wifi explorer to copy it to sd card.....you will end up full stock no root
Sent from my SPH-D710 using xda premium
Epix4G said:
Download a ek02 full tar put it on sd card and use mobile Odin to flash...you can use wifi explorer to copy it to sd card.....you will end up full stock no root
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Does mobile odin work well?
Sent from my oh-so-sexy Samsung!
Unfortunately I cracked my screen today and can't access any of my phone's memory. I can't even see anything on the screen.
I should've started this thread earlier when I first encountered the problem but a little too late for that.
Well my issue is that I have a rooted and I believe it was a custom ICS rom that was based off the AT&T version when it just came out a little while ago. I can't connect to Kies and never could even with USB settings on the phone activated, and deactiaved.
It's kinda crappy that it can't even be recognized to even get my pictures without being forced to connect through Kies. Is there any other way to get it to connect?
I'll eventually get a screen replacement and do it myself since it costs about the same thru the stupid insurance and at least I'll get to keep all my data if I do it myself.
Damn, makes me miss my stupid iPhone sometimes...
Xyberz said:
Unfortunately I cracked my screen today and can't access any of my phone's memory. I can't even see anything on the screen.
I should've started this thread earlier when I first encountered the problem but a little too late for that.
Well my issue is that I have a rooted and I believe it was a custom ICS rom that was based off the AT&T version when it just came out a little while ago. I can't connect to Kies and never could even with USB settings on the phone activated, and deactiaved.
It's kinda crappy that it can't even be recognized to even get my pictures without being forced to connect through Kies. Is there any other way to get it to connect?
I'll eventually get a screen replacement and do it myself since it costs about the same thru the stupid insurance and at least I'll get to keep all my data if I do it myself.
Damn, makes me miss my stupid iPhone sometimes...
Click to expand...
Click to collapse
So this is a no go I'm assuming since there's no response?
Xyberz said:
So this is a no go I'm assuming since there's no response?
Click to expand...
Click to collapse
OK so what u would need to do is make sure USB debugging is enabled, and if u can't see ur screen or access anything I'm afraid ur out of luck, that option needs to be enabled in order for the PC to connect, if it was enabled then make sure u have all the necessary drivers installed in ur PC, if both of those are good then idk, ur only other option is a replacement screen
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Well bit the bullet and just bought a screen replacement. Luckily I was able to get it unlocked and got all the stuff off. Mainly most important was the pictures that I couldn't get back any other way.
Well to prevent this issue from ever occurring again, it would be wise of you to back up pictures using Google+ Photos.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Hello xda-members,
the touchscreen of my Sony Ericsson Xperia Play R800i is broken. The display's fine and clean but the touchscreen has to be repaired.
Well, i want a friend of my father to have a look on it, but he's in the holidays right now. So i have to wait 2 weeks.
Meanwhile I would like to use my Play anyways. Because it's working, its just the touchscreen that's not working. That means i could still do a lot with my Play, when only using the hardware buttons. The problem is, i can't bypass the "Standby-Lock" with the hardware buttons.
I'm not sure how that "Standby-Lock" is called, but i mean the one, where you simply have to put your finger on the lock image and draw it to the right side. Luckily, I don't have any security-lock with patterns enabled, just this typical standby-lock, that keeps you from accidently phoning someone or etc. while the phone is in your pocket. I guess you know what I mean.
So, to get to my question: Does anybody know a way, how to bypass this "Standby-Lock" with hardwarebuttons or with help of the computer and usb-cable or anything else, except the use of touchscreen?
I hope there is a way and you can help me. Because that would make these 2 weeks (or more) of waiting so much easier
Thank you in advance!
Jimmy F.
What I do is just slide out the Game-Pad and that seems to work, unless you disabled the Xperia Game Launcher from launching when you open the pad?
AzNTypeR said:
What I do is just slide out the Game-Pad and that seems to work, unless you disabled the Xperia Game Launcher from launching when you open the pad?
Click to expand...
Click to collapse
If I slide out the game pad, when I already opened the bypass-lock then the game launcher opens. but with locked standby mode it does not open, i still have to unlock it first.
I'm sorry I can't be more help but I am 100% there is a way I just can't remember now
Sent from my R800i using Tapatalk 2
fma965 said:
I'm sorry I can't be more help but I am 100% there is a way I just can't remember now
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
well, hope someone who knows the way, will see this thread,too. Or maybe you'll remember
JimmyFake said:
well, hope someone who knows the way, will see this thread,too. Or maybe you'll remember
Click to expand...
Click to collapse
some sort of adb command i think. although really not sure. also not sure if it works on 2.3 as i did it on my old spica on 2.1
To bypass the lock screen use this:
https://play.google.com/store/apps/details?id=se.curity.android.screenlockbypass&hl=en
Install it via pc and install another app to trigger the app to run.
timmo15 said:
To bypass the lock screen use this:
https://play.google.com/store/apps/details?id=se.curity.android.screenlockbypass&hl=en
Install it via pc and install another app to trigger the app to run.
Click to expand...
Click to collapse
I never installed a app via pc, so im telling here what I've done, in case I did something wrong. Firstly, I logged in with my Google Account via Pc and followed your link. Then I clicked on Install and it said the app will be shortly downloaded to my device. So I stared a couple of mins on my device, but nothing was happening. Then I installed some random solitaire app, how the instructions told, in order to trigger the app. Well, I clicked on install as well and it told me the app will be downloaded shortly to my device. I stared another couple of minutes on my device but nothing was happening. :/
Did I anything wrong?
JimmyFake said:
I never installed a app via pc, so im telling here what I've done, in case I did something wrong. Firstly, I logged in with my Google Account via Pc and followed your link. Then I clicked on Install and it said the app will be shortly downloaded to my device. So I stared a couple of mins on my device, but nothing was happening. Then I installed some random solitaire app, how the instructions told, in order to trigger the app. Well, I clicked on install as well and it told me the app will be downloaded shortly to my device. I stared another couple of minutes on my device but nothing was happening. :/
Did I anything wrong?
Click to expand...
Click to collapse
It should have registered your device when you used the play store on your phone. Check its the right phone and try a reboot. In the description are the proper instructions. I think it runs on start up anyway.
Weird, its supposed to take over and a toast pops up say bypassed or something if you get there..
timmo15 said:
It should have registered your device when you used the play store on your phone. Check its the right phone and try a reboot. In the description are the proper instructions. I think it runs on start up anyway.
Weird, its supposed to take over and a toast pops up say bypassed or something if you get there..
Click to expand...
Click to collapse
Unfortunately, it does not work. Even when I reboot the phone. Is there any other way to download the app on the computer and then push it to the phone and install it, via usb?
JimmyFake said:
Unfortunately, it does not work. Even when I reboot the phone. Is there any other way to download the app on the computer and then push it to the phone and install it, via usb?
Click to expand...
Click to collapse
Yes via adb but you'll have to find the apk somewhere.
Sorry i cant help you anymore...
timmo15 said:
Yes via adb but you'll have to find the apk somewhere.
Sorry i cant help you anymore...
Click to expand...
Click to collapse
if I have time I will grab the apk for you. It's free so not warez
Sent from my R800i using Tapatalk 2
fma965 said:
if I have time I will grab the apk for you. It's free so not warez
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
Thank you, that would be very nice. I was trying myself to download it, but unfortunately the ways to get it, that i found, require me, to be able to use my phone ( which brings me back to my main problem).
JimmyFake said:
Thank you, that would be very nice. I was trying myself to download it, but unfortunately the ways to get it, that i found, require me, to be able to use my phone ( which brings me back to my main problem).
Click to expand...
Click to collapse
crap I forgot will do it in morning pm me if not done within 12hours
Sent from my R800i using Tapatalk 2
I took my phone into the sprint store this evening because the usb port was starting to act up. The tech resoldered the connections and the phone started charging the way it was supposed to again. I had flashed FC09 modem, MTD stock deodexed and Marcusants nyan kernel that shows FC09 as the baseband. I did this of course so the tech could run his diagnostics and it wouldn't look out of the ordinary. The tech I worked with already knows I root and even remembered me from my last USB port replacement but that's another interesting story in of itself.
Anyway, when I got home I set about setting it back to my previous set-up. At this point my battery meter showed 70% before I restated into CWM. I started the restore proccess from CWM and put the phone in my pocket without even thinking since I had some work to do. I pulled the phone out about an hour later when I remembered it only to find a black screen. The phone had died somewhere in that hour or so. I thought it was no big deal and I would just charge it and all would be good. I connected it to the charger and got no lights of any sort and no reaction. I tried 4 different chargers all of which work perfectly with other phones in the house to no avail.
I then tried to hook it up to my computer and got no response when attempting to reach download mode with the only 2 data cables I have; one is a radioshak and the other is the stock sammy cable. I took the battery and SD out and let it sit for about an hour. I hooked the phone back up to the cable with no battery and attempted download mode with no response. I'm at a loss as for what to do now.
I can't get to download mode and I can't take it back to the sprint store because the guy I'm sure will just blame me for rooting my phone and messing with it.
Now what??????? Could I have actually bicked it with a CWM restore that maybe died in the middle? Or could he have ****ed up my USB port for data and now im screwed on Odin.
Edit: I forgot to add the tech did what he said was a full diagnostic on it before I left and he said it passed with flying colors.
There are a large amount of threads on restore a brick in the QA forum. Try using search terms like: "hard brick" to locate them. There are good posts in them that may be of assistance. I can't recall much of the info from memory, hence my search suggestion.
Next time you go to do anything in recovery, don't have anything planned for that 3-15mins. That phone should have been burning up your pocket with the restore and screen on the entire time. I'm not sure how you didn't notice it, lol.
Maybe the battery is dead and the port stopped working again, try a charged battery
Sent from my SPH-D700 using Tapatalk 2
Sounds like the USB port went out again.
DynamicN said:
Sounds like the USB port went out again.
Click to expand...
Click to collapse
As far as I'm concerned this HAD to have been the problem. As you can see in OP I did most of the things listed in the brick threads along with the stickies.
I talked to someone on IRC about the possibility of making a download jig but my soldering person (my old man) wasn't available in time.
Sooooo. I took it back to the sprint store and simply did another TEP claim and had absolutely no troubles. In fact the guy apologized to me and said he's still getting better at his soldering skills. Not the first time I have had a USB port charge but give no data access after being soldered by them.
The batterry is fine and is sitting in the refurb epic I just got back today.
Now I have a new problem. I'm trying to root the new epic and am having trouble getting it recognized in Win 7 Pro X64. I d/l the latest drivers from thier website and have tried multiple different ways of install/uninstall including specifically giving it Admin priveleges. I have also tried unistalling drivers and installing keis using same method with same nogo.
After fiddling with SamSucks software I uninstalled all of it and d/l Heimdall.
I followed the directions in the readme.txt to install drivers and all it could find was unknown USB device which it couldn't install drivers for.
All install and uninstalls were done with restarts and ccleaner in between to make sure of complete deletion.
Could I have gotten another bad data port phone that only charges?
The only way that works every time for me is to turn on USB debugging, uminstall all drivers from the computer and then allow Windows update to search for drivers....can take like 30 minutes sometimes to get all that are needed but it always works for me.
Friendly Neighborhood Moderator
Now It seems like I'm not getting any data connection at all between the phone and computer. I'm on my third USB cord and I can't even get the phone to ask about mounting the SD card to transfer data to the computer. This just seems odd from a straight from Sprint refurb.
Edit: To make things even weirder I just hooked up my wife's Samsung feature phone and it gets recognized almost instantly.
kennyglass123 said:
The only way that works every time for me is to turn on USB debugging, uminstall all drivers from the computer and then allow Windows update to search for drivers....can take like 30 minutes sometimes to get all that are needed but it always works for me.
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
Eins7ein said:
Now It seems like I'm not getting any data connection at all between the phone and computer. I'm on my third USB cord and I can't even get the phone to ask about mounting the SD card to transfer data to the computer. This just seems odd from a straight from Sprint refurb.
Edit: To make things even weirder I just hooked up my wife's Samsung feature phone and it gets recognized almost instantly.
Click to expand...
Click to collapse
Did you try Kenny's method?
kennyglass123 said:
The only way that works every time for me is to turn on USB debugging, uminstall all drivers from the computer and then allow Windows update to search for drivers....can take like 30 minutes sometimes to get all that are needed but it always works for me.
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
By doing this I'm assuming you mean go into the device manager, selecting update driver, then Search automatically for updated driver software. Is this what you mean? I had tried this without USB debugging before your suggestion and got no dice. I just tried it with USB debugging and still no dice. Though it didn't take very long to fail so I could be doing something wrong.
Eins7ein said:
By doing this I'm assuming you mean go into the device manager, selecting update driver, then Search automatically for updated driver software. Is this what you mean? I had tried this without USB debugging before your suggestion and got no dice. I just tried it with USB debugging and still no dice. Though it didn't take very long to fail so I could be doing something wrong.
Click to expand...
Click to collapse
No. Choose uninstall driver. Then if it fails try a different port. If it is a desktop computer then only use the ports in the rear.
Friendly Neighborhood Moderator
This is exactly what I have been doing. I have tried all 6 ports on the back with nothing plugged in and all 3 ports on my netbook. The odd part to me is no matter what port on what computer I plug into, the phone does not seem to recognize it is plugged into a usb port.
Eins7ein said:
This is exactly what I have been doing. I have tried all 6 ports on the back with nothing plugged in and all 3 ports on my netbook. The odd part to me is no matter what port on what computer I plug into, the phone does not seem to recognize it is plugged into a usb port.
Click to expand...
Click to collapse
If you tried a total of 9 different ports then it sounds like a hardware issue on the Epic again.
I took the phone back to the sprint store thus evening and the tech had all the same problems I did. He tried several cords and ports to no avail. He ordered me another epic.
Its hard to believe they let these things out of the factory in such poor shape.
Here's to hoping I get a good one this time. *fingers crossed. I'm already so tired of stock rom, I miss my CM7.
Sent from my SPH-D700 using Tapatalk 2
Eins7ein said:
I took the phone back to the sprint store thus evening and the tech had all the same problems I did. He tried several cords and ports to no avail. He ordered me another epic.
Its hard to believe they let these things out of the factory in such poor shape.
Here's to hoping I get a good one this time. *fingers crossed. I'm already so tired of stock rom, I miss my CM7.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Guess ya never know lol. Good luck on the next one.
OMG I think I'm going to go nuts. I brought my fourth epic home last night and proceeded to odin CWM. Everything went perfect, or so I thought, as it said it passed. Now the damn thing is completely unresponsive and none of the tricks to get it into d/l mode work. How is this even possible. They did a battery of tests on it before I left the store and it passed. I didn't think Odin had the capability to mess up the phone this much. Any ideas on wth is going on are welcome at this point.
How old is your computer? Maybe its not sending all the data and maybe just a portion of it
Sent from my SPH-D700 using Tapatalk 2
phonehunter59 said:
How old is your computer? Maybe its not sending all the data and maybe just a portion of it
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I'd have to agree with phonehunter59 on this one. It sounds like something is going wrong on the computer's end of things or maybe Odin.
It could also be the version of odin you are on, maybe it's too old
Sent from my SPH-D700 using Tapatalk 2
Will I'm not sure what exactly went wrong but I did get into download mode finally. I used the old voodoo "magic button" coupled with pressing the power button. I was then able to enter download mode and flash. I think the problem this time was bad settings in Odin. I only unchecked restart and not everything else. As soon as I unchecked everything I was able to successfully flash CWM.
As for my computer, it's a QX6850 sitting on a 680i. About 6 or 7 years old or so, but it still gets the job done pretty good. OS is 64 bit windows 7. I used the version of Odin found in Kenny's rooting sticky in general.
Sent from my SPH-D700 using Tapatalk 2
Eins7ein said:
Will I'm not sure what exactly went wrong but I did get into download mode finally. I used the old voodoo "magic button" coupled with pressing the power button. I was then able to enter download mode and flash. I think the problem this time was bad settings in Odin. I only unchecked restart and not everything else. As soon as I unchecked everything I was able to successfully flash CWM.
As for my computer, it's a QX6850 sitting on a 680i. About 6 or 7 years old or so, but it still gets the job done pretty good. OS is 64 bit windows 7. I used the version of Odin found in Kenny's rooting sticky in general.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Glad to hear you got things working
woke up this morning to something weird. I have the appradio 2 which i use a mhl cord to connect to it. plugged it in like any other day and it wouldnt work. thought maybe it was a bad connection to radio but it wasnt. so i took it inside to plug into tv and nothing. so i plugged it into computer to see if it would connect and nothing. weird thing is, it charges but no connection to pc or anything. ive uninstalled and reinstalled drivers and nothing works. any help would be greatly appreciated.
treezy26 said:
woke up this morning to something weird. I have the appradio 2 which i use a mhl cord to connect to it. plugged it in like any other day and it wouldnt work. thought maybe it was a bad connection to radio but it wasnt. so i took it inside to plug into tv and nothing. so i plugged it into computer to see if it would connect and nothing. weird thing is, it charges but no connection to pc or anything. ive uninstalled and reinstalled drivers and nothing works. any help would be greatly appreciated.
Click to expand...
Click to collapse
get rid of windows and get ubuntu
See if this helps:
1. Toggle USB Debugging (Settings > Developer Options [Under System])
2. Power the phone off.
3. Power the phone on.
4. Toggle USB Debugging.
5. Connect to PC.
my.ads0 said:
See if this helps:
1. Toggle USB Debugging (Settings > Developer Options [Under System])
2. Power the phone off.
3. Power the phone on.
4. Toggle USB Debugging.
5. Connect to PC.
Click to expand...
Click to collapse
Thanks for the response but that didnt seem to help.
I'm curious if its a hardware issue or something else. I've restored a backup i had to see if that helped but nothing. If i return to stock unrooted will that help? Or does someone have an idea as to why and how to fix this? Thanks for any help.
No idea. I did some searches for something like "android stuck usb charge only" and came up with the below. Some folks said that they were able to fix it, though not permanently, by wiping. The above seemed to work for some, though again, not permanently. I wasn't able to find anything else.
Did you try connecting to other PC's?
Did you try removing the device from your PC's device manager, uninstall the driver, then reinstall the driver and reconnect?
I agree it seems hardware'ish because it's also a problem with the MHL cord, too. I wish I could help more, but there's not much out there about being stuck in charge only mode.
Are you still under Manufacterer's warranty? Maybe that can be returned because it won't mount.?
my.ads0 said:
No idea. I did some searches for something like "android stuck usb charge only" and came up with the below. Some folks said that they were able to fix it, though not permanently, by wiping. The above seemed to work for some, though again, not permanently. I wasn't able to find anything else.
Did you try connecting to other PC's?
Did you try removing the device from your PC's device manager, uninstall the driver, then reinstall the driver and reconnect?
I agree it seems hardware'ish because it's also a problem with the MHL cord, too. I wish I could help more, but there's not much out there about being stuck in charge only mode.
Are you still under Manufacterer's warranty? Maybe that can be returned because it won't mount.?
Click to expand...
Click to collapse
Dont have another PC so that option cant be tested now. I removed the device and unistalled/reinstalled drivers and nothing.
Warranty is not an option because its past due. I do have insurance but am afraid of not getting an OG in return and i dont know how all that works to be honest.
I am willing to return to stock but only one concern i have is losing all my data. How do i backup pics and documents without being able to connect to pc? PLEASE can someone show me the way. Thanks again for all responses.
treezy26 said:
How do i backup pics and documents without being able to connect to pc?.
Click to expand...
Click to collapse
Google Drive
DropBox
Box (free 50 GB account with LGOG)
I've had this problem. Tried everything and finally switching to the original lg USB cable worked. Random I know
Sent from my LG-LS970 using xda app-developers app
sbslammer said:
I've had this problem. Tried everything and finally switching to the original lg USB cable worked. Random I know
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I'm using the original USB cable.
Now I'm using LGNPST but i cant get it to recognize my phone. IDK what else to do.
Have you tried different drivers yet? There's 3 of them here.
http://forum.xda-developers.com/showthread.php?p=35520144
Let's hope this'll work for you.
Sent from my LG-LS970 using xda premium
I started having this problem after installing the latest LG drivers. Replicated the issue on 3 different Windows 7 PCs. 1 32-bit home-built, 1 64-bit Gateway laptop with OEM image, 1 64-bit HP Laptop with work image.
Before upgrading, phone connects fine with in both MTP & PTP modes just using built-in (or pulled from WU) drivers. After upgrading to LG drivers, PC no longer detects the phone. Uninstalling the drivers or going backwards to earlier versions does not fix the problem.
Again,thanks to everyone for their responses, I really appreciate it. But unfortunately nothing seems to be helping my issue. I'm going by my wife's job to hook up to her computer to see if hers can recognize my phone, well at least I hope.
One thing I ask of someone, I've been using Arliberator to connect to my radio. Maybe someone has more knowledge than me to help.
https://play.google.com/store/apps/...51bGwsMSwyLDEsImNvbS5reWxlLmFybGliZXJhdG9yIl0.
Anyways, it has an option under settings to "fix drivers" which I have no idea what it does so i never messed with it. Except for when it wouldnt connect to the radio, I pressed it. Could that have anything to do with it not connecting to pc? I've emailed the dev of this app but have gotten no response as to what it does.
I'm really at a loss here as I can still use my phone but not to its full potential. Its frustrating because I cant even return to stock to see if it will fix my issue. Is there any other way to return to stock without a pc? Like can i flash a stock RUU? I ask because I once had an Evo 4g and was able to do it that way.
Again, thanks to everyone's responses.
I finally heard from the dev of ARLiberator and he guarantees me his app has nothing to do with my phone and that the "fix drivers" is for the app only. He says to try and reset my phone to try and solve my issue. But wouldn't that completely erase my phone?
Idk how I got here...
Anybody???
Idk how I got here...
Try this.
http://forum.xda-developers.com/showthread.php?t=1800935
Evolutionmods said:
get rid of windows and get ubuntu
Click to expand...
Click to collapse
Agreed!
johnq54 said:
Try this.
http://forum.xda-developers.com/showthread.php?t=1800935
Click to expand...
Click to collapse
Thanks but that didnt help either. Idk what else to do. I dont understand how it can still charge but not be recognized by my pc or mhl cord doesnt show up. Weird thing is when I do plug up the MHL phone recognizes it and the mirroring, idk what its called exactly pops up but doesnt show up on TV.
What to do...what to do...
Your charging port may have broken a connector. Happened to my last phone. Charges fine but the computer connector won't work. Replacement needed bud.
Sent from my LG-LS970 using xda premium
alsaces daddy said:
Your charging port may have broken a connector. Happened to my last phone. Charges fine but the computer connector won't work. Replacement needed bud.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
If this is the case will sprint replace it even if I am rooted? I have the insurance but have been hesitant to take it for that reason.
treezy26 said:
If this is the case will sprint replace it even if I am rooted? I have the insurance but have been hesitant to take it for that reason.
Click to expand...
Click to collapse
Just unroot bud.
Sent from my LG-LS970 using xda premium