Develop Bugs

[Q] Problem Connecting Phone to PC (Please move to Q/A, Sorry)

I've been looking for the past few hours and now I'm starting to get nervous --- i've read tons of threads with people having something like my problem and I've done everything suggested and still no luck, starting to freak out a bit haha. Hooked my phone up this morning, everything was as normal. Plug it in, USB option comes up, worked perfectly. The only thing I did with my phone was go on a long car ride and charged it using an adapter to a house charger. Im assuming that somehow that screwed it up since it was being converted. This sounds strange to me but its my only idea. I can't connect, the second I plug in my phone it starts to charge (and for some reason the light doesn't come on when it usually does).
Things I've tried =
-Reset phone/computer
-Reflashed latest Calks
-Tried 4 different cables (along with all computers USB ports)
-Reinstalled Samsung drivers
-Reflashed stock
-System restore of computer
--------
Other than completely wiping my phone of everything I don't know what else to try. Any suggestions/help would be greatly appreciated! Thanks for your time.

Try booting on recovery and enable USB mount, if you still don't have access to the phone then very likely your USB port is damaged. This will discard any issues with the ROM
Another thing you could try is to get the phone to another computer, the computer should recognize it even without drivers if you enable USB storage mode or at the very least make the unknown device show up on the device manager. If it shows up then you know for sure your computer is the problem, if not, well then it is your phone.

fenixjn said:
Try booting on recovery and enable USB mount, if you still don't have access to the phone then very likely your USB port is damaged. This will discard any issues with the ROM
Another thing you could try is to get the phone to another computer, the computer should recognize it even without drivers if you enable USB storage mode or at the very least make the unknown device show up on the device manager. If it shows up then you know for sure your computer is the problem, if not, well then it is your phone.
Click to expand...
Click to collapse
I even went so far as to format my netbook and start fresh, still didn't work --- just got it set back up...
My girlfriend just got home with her computer and it's not recognizing it at all. When I go into settings>Wireless> USB Utilities, it doesn't even recognize that my cable is connected (even though its charging)
I didn't know there was anything like Force USB Mount in recovery so I'm going to do that right after I type this post
This is really frustrating :O haha so I guess if your suggestion doesn't work, whats the easiest way to un-root return to stock so I can stop by the Sprint store tomorrow? I talked to a rep that roots his phones and he said as long as it says Gingerbread 2.3.6 they'll take it back (I guess they don't look at the custom counter)
Any other suggestions? (Thanks fen)

Thanks for the idea but the force mount through CWM didn't work ... Gave me a little hope by popping up on my pc for two seconds but then disappeared. Yeah so looks like my next option is to return to stock and get me a new one?

AVAH0LIC said:
Thanks for the idea but the force mount through CWM didn't work ... Gave me a little hope by popping up on my pc for two seconds but then disappeared. Yeah so looks like my next option is to return to stock and get me a new one?
Click to expand...
Click to collapse
Odd... so the phone popped on windows and then disconnected immediately? That would indicate that physically the port is fine but logically something is going on... (unless you moved the cable).
Well if that is the case then you could either try to diagnose the issue yourself OR try to get the phone replaced somehow.
Another idea... have your tried download mode?

Im on the same boat delete the drivers from your computer the actual usb drivers not the samsung ones that worked for me the update them again. I have a dv7 hp. It works at times but somethimes it says error connect to a high speed usb
Sent from my SPH-D710 using Tapatalk

I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?

n01un0 said:
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
Click to expand...
Click to collapse
Ive never done anything like that just rom flashes --- but its worth a shot ---- only problem is ##8878# doesn't do anything on mine??? You sure thats the right dial code?

fenixjn said:
Odd... so the phone popped on windows and then disconnected immediately? That would indicate that physically the port is fine but logically something is going on... (unless you moved the cable).
Well if that is the case then you could either try to diagnose the issue yourself OR try to get the phone replaced somehow.
Another idea... have your tried download mode?
Click to expand...
Click to collapse
Sorry I was in a hurry when I typed that --- let me clarify.
Honestly I did so much tinkering last night that I don't remember exactly how i got it to do it. But after playing with the mounts in CWM, I eventually started up my phone and the USB logo came up in the Notif bar --- (MTP Inititaed - or whatever that is) but after clicking the icon nothing happened and eventually just went away

n01un0 said:
I had this same issue (if I'm reading and understanding you correctly) for the last week and was at my wits end. No matter what I did or changed, I could not get my PC to recognize my phone all of a sudden. The USB connected notification just quit appearing. I installed and uninstalled drivers, installed and uninstalled different Keis versions, tried different cables, different computers..... Finally just as I was about to wipe and Odin the phone, I remembered I had changed the AP/CP setting in ##8878# when I did the PRL change and just maybe I forgot to change it back.......sure enough, that was it. I switched it back, connected phone to PC and bam!...all fixed.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?
Click to expand...
Click to collapse
Just by playing around with those numbers you gave me I found it to be ##8778# bringing up the USB -AP/CP/ALL menu --- which one is it supposed to be set as?
EDIT*** It was on AP... tried the other two options, resetting phone in between both of them and still no luck --- have an appt to go to the sprint store tomorrow ---
Because I can't get the phone to connect... I don't suppose there is a way to flash unroot is there --- I've already flashed modem kernal and stock rom --- went into ES and deleted Superuser... the only way you can tell that my phone has been messed with is that CWM still pops up when you do the Volume+poweron... any suggestions?
Thanks again for the suggestions everyone I really appreciate them

AVAH0LIC said:
Just by playing around with those numbers you gave me I found it to be ##8778# bringing up the USB -AP/CP/ALL menu --- which one is it supposed to be set as?
EDIT*** It was on AP... tried the other two options, resetting phone in between both of them and still no luck --- have an appt to go to the sprint store tomorrow ---
Because I can't get the phone to connect... I don't suppose there is a way to flash unroot is there --- I've already flashed modem kernal and stock rom --- went into ES and deleted Superuser... the only way you can tell that my phone has been messed with is that CWM still pops up when you do the Volume+poweron... any suggestions?
Thanks again for the suggestions everyone I really appreciate them
Click to expand...
Click to collapse
I am having the same issue. However, my phone is stock. Do you know what was the culprit?

Get insurance on it wait a few weeks, say you lost it and pay the $100 for the replacement. Keep the lost one for parts. Or sell it on ebay for parts. This is if you can't fully get back to stock.
Sent from my SPH-D710 using xda premium

I never did get a confirmation kn exactly what the problem was. As stated above i just deleted super user and flashed a stock everything and just prayed they wouldn't check for cwm which they didn't.
Im assuming my charging port burnt out. I used multiple different cables, including LG HTC stock Samsung and some Verizon one. But i think what finally did it was using the Verizon one in the car with a really old adapter. I don't understand why this would cause a problem but i really believe it did. That Verizon cable even acts weird with this new phone like it says charging but led light randomly turns on and off.
Im confused as to what happens to that old phone if you ever lose it. I lost a phone along time ago when I was drunk, but instead of claiming insurance i was eligible for upgrade. What possibly could have ended up happening with that old phone? Somebody found a paper weight? Or was somebody able to flash it and use it?
I guess the condensed version of my question is what happens to a found phone after device has been reported lost?
Sent from my oh-so-sexy Samsung!

Download a ek02 full tar put it on sd card and use mobile Odin to flash...you can use wifi explorer to copy it to sd card.....you will end up full stock no root
Sent from my SPH-D710 using xda premium

Epix4G said:
Download a ek02 full tar put it on sd card and use mobile Odin to flash...you can use wifi explorer to copy it to sd card.....you will end up full stock no root
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Does mobile odin work well?
Sent from my oh-so-sexy Samsung!

S3 suddenly stopped being able to connect to computers

Hi there,
Not sure if anybody else has experienced this. Suddenly my S3 stopped being able to be recognized as a device by any computer. It will charge when plugged into USB. I have checked and fast charge isn't turned on. I have uninstalled the drivers from all my computers, I've tried this on a mac and a PC.
I'm on Task's AOKP Rom. But I have tried other Roms and the problem still persists. So I'm thinking it's a problem with my S3. Right now it's very annoying in that I have to always pop out my SD card to transfer files to my phone.

raginglemon said:
Hi there,
Not sure if anybody else has experienced this. Suddenly my S3 stopped being able to be recognized as a device by any computer. It will charge when plugged into USB. I have checked and fast charge isn't turned on. I have uninstalled the drivers from all my computers, I've tried this on a mac and a PC.
I'm on Task's AOKP Rom. But I have tried other Roms and the problem still persists. So I'm thinking it's a problem with my S3. Right now it's very annoying in that I have to always pop out my SD card to transfer files to my phone.
Click to expand...
Click to collapse
Did you check the oil?
Edit: I'm joking haha. But you might want to try another cable. It's almost always the cable.

The fact that you changed ROMs makes this less likely, but maybe you have a kernel that has Fast Charge on?

thacounty said:
Did you check the oil?
Edit: I'm joking haha. But you might want to try another cable. It's almost always the cable.
Click to expand...
Click to collapse
=) I did just check a different cable, no difference, my old cable works with my sisters S3, it's only mine.
danielsaenz said:
The fact that you changed ROMs makes this less likely, but maybe you have a kernel that has Fast Charge on?
Click to expand...
Click to collapse
I checked to make sure fast charge isn't turned on. could it be that i fried the microUSB port?

raginglemon said:
=) I did just check a different cable, no difference, my old cable works with my sisters S3, it's only mine.
I checked to make sure fast charge isn't turned on. could it be that i fried the microUSB port?
Click to expand...
Click to collapse
Probably not. Go to settings - USB Connection and check MTP. It works better than the other one.

thacounty said:
Probably not. Go to settings - USB Connection and check MTP. It works better than the other one.
Click to expand...
Click to collapse
Strange, I remember seeing that option on the stock TW rom, but I can't seem to find it in Task's AOKP rom, I noticed you're on AOKP too, would you mind giving a bit more detail on where that option is?

I know this isn't the perfect solution, but if you ever get yourself into a situation where the wire won't work and you really need to transfer files and you're on reliable wifi give AirDroid a try. Free app, that allows you to transfer files from a web browser. Saved me many many times. Sorry I can't help with the original issue!

raginglemon said:
Strange, I remember seeing that option on the stock TW rom, but I can't seem to find it in Task's AOKP rom, I noticed you're on AOKP too, would you mind giving a bit more detail on where that option is?
Click to expand...
Click to collapse
Home - Menu - Settings - Storage - Menu - USB Computer Settings.

that didn't do it, but i re-flashed my rom about 5 times last night from AOKP to Slim to CM, and finally CM10.1 seems to have fixed the problem lol
thanks for all the help

Pull the SD card
raginglemon said:
that didn't do it, but i re-flashed my rom about 5 times last night from AOKP to Slim to CM, and finally CM10.1 seems to have fixed the problem lol
thanks for all the help
Click to expand...
Click to collapse
I had the same problem with my stock/rooted ATT s3. Tried a multitude of cables and settings, but what finally worked was a bit of advice from another site. Power the phone off, pull the SD card, and try again. For me this worked. I do not have a good explanation why, but it ended a good bit of frustration.
Good luck to you.

Tried this and other -- nothing works
tobnddl said:
I had the same problem with my stock/rooted ATT s3. Tried a multitude of cables and settings, but what finally worked was a bit of advice from another site. Power the phone off, pull the SD card, and try again. For me this worked. I do not have a good explanation why, but it ended a good bit of frustration.
Good luck to you.
Click to expand...
Click to collapse
I've been having the same trouble, and tried this and other "fixes" (like in the thread http://forum.xda-developers.com/showthread.php?t=2049834) but nothing seems to work.
My situation is perhaps a little different, but this is what I know:
New Rogers SGS3 (I747M) - never rooted, or anything fancy
Plugged it into Kies the first time, and told me there was a Jelly Bean update
Did the update.
Now no computer will detect it - 2 PCs and a MAC.
I've installed and uninstalled drivers off and on for weeks
Tried Odin mode and Odin on 2 PCs
Doesn't even show up in the Windows Device list.
ADB doesn't see it (I assume because the driver doesn't see it)
Nada.
I only have one cable - the one that came with it.
People often talk of making sure it's in MTP mode, but I have no USB settings in my "settings" (JB is different?) though I think I can set it through the PhoneUtil suggested in the link above.
Created an account here (and watched the Noob video!) just to ask this question. All I can think of is that I must have broken something on the phone. Does anyone have any more suggestions or should I just take the phone back to Rogers and say it's broken?
Thanks a bunch!
Ian

Uninstall Kies
Uninstall Drivers
Reboot
Hook up the phone and let Windows Update get whatever drivers it can. It won't get them all
Unhook phone
Install the I747 drivers
Do NOT install Kies
Hook da fone back up

Still nothing
Quasimodem said:
Uninstall Kies
Uninstall Drivers
Reboot
Hook up the phone and let Windows Update get whatever drivers it can. It won't get them all
Unhook phone
Install the I747 drivers
Do NOT install Kies
Hook da fone back up
Click to expand...
Click to collapse
First and foremost - thanks.
But nothing happens. Uninstalled everything AND used the registry editor to get rid of everything "Samsung" and "Kies". I've now noticed, that I don't even get the windows "da-dump" when you plug a USB device in.
It seems there are no SGH-I747M specific drivers (are there?), just the "Samsung USB driver for mobile phones". Is that right?
So, I'm still stuck. The thing charges, but NOTHING else.
Any more ideas?
Ian

iwilliamson said:
First and foremost - thanks.
But nothing happens. Uninstalled everything AND used the registry editor to get rid of everything "Samsung" and "Kies". I've now noticed, that I don't even get the windows "da-dump" when you plug a USB device in.
It seems there are no SGH-I747M specific drivers (are there?), just the "Samsung USB driver for mobile phones". Is that right?
So, I'm still stuck. The thing charges, but NOTHING else.
Any more ideas?
Ian
Click to expand...
Click to collapse
Try these drivers:
ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0.exe - 23.15 MB

Quasimodem said:
Try these drivers:
ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0.exe - 23.15 MB
Click to expand...
Click to collapse
Thanks. The server you pointed to seems to be down though so I got them from canman.konnekerville.com/ d2att/Rooting/ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0.exe
No change when I plug the phone in.
In the mean time, I tried looking at the connectors on the cable and in the phone and tried cleaning them up. Still nothing.
I think it's gonna have to go back to Rogers....
Ian

iwilliamson said:
Thanks. The server you pointed to seems to be down though so I got them from canman.konnekerville.com/ d2att/Rooting/ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0.exe
No change when I plug the phone in.
In the mean time, I tried looking at the connectors on the cable and in the phone and tried cleaning them up. Still nothing.
I think it's gonna have to go back to Rogers....
Ian
Click to expand...
Click to collapse
try a different usb slot, preferably on the back...

Quasimodem said:
try a different usb slot, preferably on the back...
Click to expand...
Click to collapse
Wow. I feel stupid -- kinda. I found a neighbour who had the right cable (from an old Nokia phone actually) and, surprise surprise, it was the cable. I had seen all sorts of people saying "Check the cable", or "try a new cable", but I only had the one.
Thanks for all your help, and sorry to have wasted your time.
Ian

iwilliamson said:
Wow. I feel stupid -- kinda. I found a neighbour who had the right cable (from an old Nokia phone actually) and, surprise surprise, it was the cable. I had seen all sorts of people saying "Check the cable", or "try a new cable", but I only had the one.
Thanks for all your help, and sorry to have wasted your time.
Ian
Click to expand...
Click to collapse
at least it works...

iwilliamson said:
Wow. I feel stupid -- kinda. I found a neighbour who had the right cable (from an old Nokia phone actually) and, surprise surprise, it was the cable. I had seen all sorts of people saying "Check the cable", or "try a new cable", but I only had the one.
Thanks for all your help, and sorry to have wasted your time.
Ian
Click to expand...
Click to collapse
YOU sir are no geek. Only 1 cable? They are a dime a dozen now days. Even AT&T gave me a free one the other day. The good thing is that your back up and running. Again, why is it that it is most always the smallest thing that causes the biggest head ache?

MasterDecker said:
YOU sir are no geek. Only 1 cable? They are a dime a dozen now days. Even AT&T gave me a free one the other day. The good thing is that your back up and running. Again, why is it that it is most always the smallest thing that causes the biggest head ache?
Click to expand...
Click to collapse
Heh heh. I have hundreds of cables for everything else. Just not the micro USB on the phone! I just got the phone and haven't even played with it much yet! Please don't take away my geek license!
Thanks again, guys!
Ian

[Q] Phone is not recognized

Hey there...
So, I just got a Galaxy S3 i747, but I'm using it in Costa Rica (it's already unlocked). I connected to the computer and it's not recognized. I have installed twice Samsung Drivers, but nothing. It's not recognized by the computer and neither by Kies. I've tried 2 different USB cables (I don't have more) and 3 computers, and nothing. I Reset Data from cell, but didn't help. I don't have a external SD installed. I even turn the phone off, took out the battery about 60 seconds, but that didn't make it work. I also tried USB ports from the back, but no luck.
If I tried this 2 USB cables and the 3 computers using a Galaxy S2, it's recognized every time, so it's something about this phone. What else can I do? I'll appreciate any help or tip.
Thanks.

agafed said:
Hey there...
So, I just got a Galaxy S3 i747, but I'm using it in Costa Rica (it's already unlocked). I connected to the computer and it's not recognized. I have installed twice Samsung Drivers, but nothing. It's not recognized by the computer and neither by Kies. I've tried 2 different USB cables (I don't have more) and 3 computers, and nothing. I Reset Data from cell, but didn't help. I don't have a external SD installed. I even turn the phone off, took out the battery about 60 seconds, but that didn't make it work. I also tried USB ports from the back, but no luck.
If I tried this 2 USB cables and the 3 computers using a Galaxy S2, it's recognized every time, so it's something about this phone. What else can I do? I'll appreciate any help or tip.
Thanks.
Click to expand...
Click to collapse
I reported a similar problem with my phone here:
http://forum.xda-developers.com/showpost.php?p=36602425&postcount=1681
If your phone is messed up like my old one was to the point where it shows up as "Device Not Recognized", your only course of action is to warranty the phone because recovery through Kies Air is not possible and at this point you cannot connect to any computer to fix the problem. I believe it to be a non-repairable software issue.

agafed said:
Hey there...
So, I just got a Galaxy S3 i747, but I'm using it in Costa Rica (it's already unlocked). I connected to the computer and it's not recognized. I have installed twice Samsung Drivers, but nothing. It's not recognized by the computer and neither by Kies. I've tried 2 different USB cables (I don't have more) and 3 computers, and nothing. I Reset Data from cell, but didn't help. I don't have a external SD installed. I even turn the phone off, took out the battery about 60 seconds, but that didn't make it work. I also tried USB ports from the back, but no luck.
If I tried this 2 USB cables and the 3 computers using a Galaxy S2, it's recognized every time, so it's something about this phone. What else can I do? I'll appreciate any help or tip.
Thanks.
Click to expand...
Click to collapse
Through where are you installing the Samsung drivers from?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

VTMongoose said:
If your phone is messed up like my old one was to the point where it shows up as "Device Not Recognized", your only course of action is to warranty the phone because recovery through Kies Air is not possible and at this point you cannot connect to any computer to fix the problem. I believe it to be a non-repairable software issue.
Click to expand...
Click to collapse
I haven't tried to update my phone. And when I connect it to PC, the computer doesn't show anything, but the cell starts charging...
I think my situation it's a bit different from yours, but I'm also afraid it's an issue that can't be solved.
Bruce Lee said:
Through where are you installing the Samsung drivers from?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I downloaded from here, under the Manuals & Downloads tab and then click in "Software".

agafed said:
I haven't tried to update my phone. And when I connect it to PC, the computer doesn't show anything, but the cell starts charging...
I think my situation it's a bit different from yours, but I'm also afraid it's an issue that can't be solved.
Thanks. I downloaded from here, under the Manuals & Downloads tab and then click in "Software".
Click to expand...
Click to collapse
When I have issues with my phone and drivers I use this.
http://forum.xda-developers.com/showthread.php?p=77
Try installing the drivers through this.
Edit if the link doesn't work look for the sgs3 toolkit in the development section.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Thanks!
I already tried this Toolkit you recommended, but didn't work either... again!
You guys then think this might be something messed up with the phone that can't be solved?
Thanks!

agafed said:
Thanks!
I already tried this Toolkit you recommended, but didn't work either... again!
You guys then think this might be something messed up with the phone that can't be solved?
Thanks!
Click to expand...
Click to collapse
It sounds like a hardware issue. I would try to see if the phone could be replaced by the carrier. Hopefully free....... They should of its still under warranty.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Umm 2 things I can think of.
1st. Reboot/install updates on your pc
2nd. Do you have fast charge unabled?

BWolf56 said:
Umm 2 things I can think of.
1st. Reboot/install updates on your pc
2nd. Do you have fast charge unabled?
Click to expand...
Click to collapse
How or where can I check if "fast charge" is enabled? Can't find it...
Thanks!

agafed said:
How or where can I check if "fast charge" is enabled? Can't find it...
Thanks!
Click to expand...
Click to collapse
If you don't know where it is, you probably don't have it enabled. And you need a custom ROM as well to have it.

All right.
I'm in stock right now. I can't connect my phone, so I can't update. -_-

Are u using the original USB cable that came with the S3? Cuz I've seen so many others that just don't work and will do exactly what or saying but work for any other hardware.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Hi try this samsung ⣔ driver
http://hotfile.com/dl/133929348/9107244/SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip.html
Sent from my GT-S5570 using xda app-developers app

Thanks guys.
Yeah, Im using the original USB cable that came with the phone.
It's kind of late now, I'll try that driver later. Appreciated.

Well, I tried everything and still no luck.
I think I'm gonna sell it.
Thank you very much for your help.

My phone did this about a hour ago and I fixed it.So I am att sghi747 rooted with a i747m rom I changed to att base rom pc picked it up . Oh put your sd card in card reader to load new rom
Sent from my SAMSUNG-SGH-I747 using xda premium
---------- Post added at 09:15 PM ---------- Previous post was at 08:47 PM ----------
If the phone works you should be able to use ftp program to load files onto it over wifi not sure you have home network .Just a option
Sent from my SAMSUNG-SGH-I747 using xda premium

Thanks for the info man!

Did I brick it for real????

I took my phone into the sprint store this evening because the usb port was starting to act up. The tech resoldered the connections and the phone started charging the way it was supposed to again. I had flashed FC09 modem, MTD stock deodexed and Marcusants nyan kernel that shows FC09 as the baseband. I did this of course so the tech could run his diagnostics and it wouldn't look out of the ordinary. The tech I worked with already knows I root and even remembered me from my last USB port replacement but that's another interesting story in of itself.
Anyway, when I got home I set about setting it back to my previous set-up. At this point my battery meter showed 70% before I restated into CWM. I started the restore proccess from CWM and put the phone in my pocket without even thinking since I had some work to do. I pulled the phone out about an hour later when I remembered it only to find a black screen. The phone had died somewhere in that hour or so. I thought it was no big deal and I would just charge it and all would be good. I connected it to the charger and got no lights of any sort and no reaction. I tried 4 different chargers all of which work perfectly with other phones in the house to no avail.
I then tried to hook it up to my computer and got no response when attempting to reach download mode with the only 2 data cables I have; one is a radioshak and the other is the stock sammy cable. I took the battery and SD out and let it sit for about an hour. I hooked the phone back up to the cable with no battery and attempted download mode with no response. I'm at a loss as for what to do now.
I can't get to download mode and I can't take it back to the sprint store because the guy I'm sure will just blame me for rooting my phone and messing with it.
Now what??????? Could I have actually bicked it with a CWM restore that maybe died in the middle? Or could he have ****ed up my USB port for data and now im screwed on Odin.
Edit: I forgot to add the tech did what he said was a full diagnostic on it before I left and he said it passed with flying colors.

There are a large amount of threads on restore a brick in the QA forum. Try using search terms like: "hard brick" to locate them. There are good posts in them that may be of assistance. I can't recall much of the info from memory, hence my search suggestion.
Next time you go to do anything in recovery, don't have anything planned for that 3-15mins. That phone should have been burning up your pocket with the restore and screen on the entire time. I'm not sure how you didn't notice it, lol.

Maybe the battery is dead and the port stopped working again, try a charged battery
Sent from my SPH-D700 using Tapatalk 2

Sounds like the USB port went out again.

DynamicN said:
Sounds like the USB port went out again.
Click to expand...
Click to collapse
As far as I'm concerned this HAD to have been the problem. As you can see in OP I did most of the things listed in the brick threads along with the stickies.
I talked to someone on IRC about the possibility of making a download jig but my soldering person (my old man) wasn't available in time.
Sooooo. I took it back to the sprint store and simply did another TEP claim and had absolutely no troubles. In fact the guy apologized to me and said he's still getting better at his soldering skills. Not the first time I have had a USB port charge but give no data access after being soldered by them.
The batterry is fine and is sitting in the refurb epic I just got back today.
Now I have a new problem. I'm trying to root the new epic and am having trouble getting it recognized in Win 7 Pro X64. I d/l the latest drivers from thier website and have tried multiple different ways of install/uninstall including specifically giving it Admin priveleges. I have also tried unistalling drivers and installing keis using same method with same nogo.
After fiddling with SamSucks software I uninstalled all of it and d/l Heimdall.
I followed the directions in the readme.txt to install drivers and all it could find was unknown USB device which it couldn't install drivers for.
All install and uninstalls were done with restarts and ccleaner in between to make sure of complete deletion.
Could I have gotten another bad data port phone that only charges?

The only way that works every time for me is to turn on USB debugging, uminstall all drivers from the computer and then allow Windows update to search for drivers....can take like 30 minutes sometimes to get all that are needed but it always works for me.
Friendly Neighborhood Moderator

Now It seems like I'm not getting any data connection at all between the phone and computer. I'm on my third USB cord and I can't even get the phone to ask about mounting the SD card to transfer data to the computer. This just seems odd from a straight from Sprint refurb.
Edit: To make things even weirder I just hooked up my wife's Samsung feature phone and it gets recognized almost instantly.

kennyglass123 said:
The only way that works every time for me is to turn on USB debugging, uminstall all drivers from the computer and then allow Windows update to search for drivers....can take like 30 minutes sometimes to get all that are needed but it always works for me.
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
Eins7ein said:
Now It seems like I'm not getting any data connection at all between the phone and computer. I'm on my third USB cord and I can't even get the phone to ask about mounting the SD card to transfer data to the computer. This just seems odd from a straight from Sprint refurb.
Edit: To make things even weirder I just hooked up my wife's Samsung feature phone and it gets recognized almost instantly.
Click to expand...
Click to collapse
Did you try Kenny's method?

kennyglass123 said:
The only way that works every time for me is to turn on USB debugging, uminstall all drivers from the computer and then allow Windows update to search for drivers....can take like 30 minutes sometimes to get all that are needed but it always works for me.
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
By doing this I'm assuming you mean go into the device manager, selecting update driver, then Search automatically for updated driver software. Is this what you mean? I had tried this without USB debugging before your suggestion and got no dice. I just tried it with USB debugging and still no dice. Though it didn't take very long to fail so I could be doing something wrong.

Eins7ein said:
By doing this I'm assuming you mean go into the device manager, selecting update driver, then Search automatically for updated driver software. Is this what you mean? I had tried this without USB debugging before your suggestion and got no dice. I just tried it with USB debugging and still no dice. Though it didn't take very long to fail so I could be doing something wrong.
Click to expand...
Click to collapse
No. Choose uninstall driver. Then if it fails try a different port. If it is a desktop computer then only use the ports in the rear.
Friendly Neighborhood Moderator

This is exactly what I have been doing. I have tried all 6 ports on the back with nothing plugged in and all 3 ports on my netbook. The odd part to me is no matter what port on what computer I plug into, the phone does not seem to recognize it is plugged into a usb port.

Eins7ein said:
This is exactly what I have been doing. I have tried all 6 ports on the back with nothing plugged in and all 3 ports on my netbook. The odd part to me is no matter what port on what computer I plug into, the phone does not seem to recognize it is plugged into a usb port.
Click to expand...
Click to collapse
If you tried a total of 9 different ports then it sounds like a hardware issue on the Epic again.

I took the phone back to the sprint store thus evening and the tech had all the same problems I did. He tried several cords and ports to no avail. He ordered me another epic.
Its hard to believe they let these things out of the factory in such poor shape.
Here's to hoping I get a good one this time. *fingers crossed. I'm already so tired of stock rom, I miss my CM7.
Sent from my SPH-D700 using Tapatalk 2

Eins7ein said:
I took the phone back to the sprint store thus evening and the tech had all the same problems I did. He tried several cords and ports to no avail. He ordered me another epic.
Its hard to believe they let these things out of the factory in such poor shape.
Here's to hoping I get a good one this time. *fingers crossed. I'm already so tired of stock rom, I miss my CM7.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Guess ya never know lol. Good luck on the next one.

OMG I think I'm going to go nuts. I brought my fourth epic home last night and proceeded to odin CWM. Everything went perfect, or so I thought, as it said it passed. Now the damn thing is completely unresponsive and none of the tricks to get it into d/l mode work. How is this even possible. They did a battery of tests on it before I left the store and it passed. I didn't think Odin had the capability to mess up the phone this much. Any ideas on wth is going on are welcome at this point.

How old is your computer? Maybe its not sending all the data and maybe just a portion of it
Sent from my SPH-D700 using Tapatalk 2

phonehunter59 said:
How old is your computer? Maybe its not sending all the data and maybe just a portion of it
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
I'd have to agree with phonehunter59 on this one. It sounds like something is going wrong on the computer's end of things or maybe Odin.

It could also be the version of odin you are on, maybe it's too old
Sent from my SPH-D700 using Tapatalk 2

Will I'm not sure what exactly went wrong but I did get into download mode finally. I used the old voodoo "magic button" coupled with pressing the power button. I was then able to enter download mode and flash. I think the problem this time was bad settings in Odin. I only unchecked restart and not everything else. As soon as I unchecked everything I was able to successfully flash CWM.
As for my computer, it's a QX6850 sitting on a 680i. About 6 or 7 years old or so, but it still gets the job done pretty good. OS is 64 bit windows 7. I used the version of Odin found in Kenny's rooting sticky in general.
Sent from my SPH-D700 using Tapatalk 2

Eins7ein said:
Will I'm not sure what exactly went wrong but I did get into download mode finally. I used the old voodoo "magic button" coupled with pressing the power button. I was then able to enter download mode and flash. I think the problem this time was bad settings in Odin. I only unchecked restart and not everything else. As soon as I unchecked everything I was able to successfully flash CWM.
As for my computer, it's a QX6850 sitting on a 680i. About 6 or 7 years old or so, but it still gets the job done pretty good. OS is 64 bit windows 7. I used the version of Odin found in Kenny's rooting sticky in general.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Glad to hear you got things working

[Q] PC won't recognize USB (no error message)

My Phone
Hi, Uber-noob here. I have the sprint samsung gs3, Model number sph-l710, android version 4.1.2. I had stock rooted my phone via QBKing77's video (thanks man!) and had had no problems, including connecting my phone by USB (PDA net, Odin, etc.) to my PCs.
My Problem
For no reason I can see, my laptop(s) stopped recognizing my phone. There is no message, the pc acts as though nothing was plugged in, no message. Device manager shows nothing either. The ONLY sign that my phone was plugged in at all is the "battery charging" icon on my phone.
What I've Done
I use a good data cable that used to work, and have bought and tried a new one. I have tried 2 other computers. I have reinstalled the USB drivers. I have pulled the battery from my phone, waited, and put it back in. I just did a factory reset. Nothing has changed.
I hope someone here can help me figure this out, cause I'm stumped. Please let me know if I can provide any more info. Thanks!

Go into developers options in settings. Make sure usb debugging is turned off. Try that.
Sent from the future via Tapatalk 4

edfunkycold said:
Go into developers options in settings. Make sure usb debugging is turned off. Try that.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Hey, thanks for the response! I tried it, no effect. Any other ideas?

Did you try to remove S3 in device manager in your PC and plug S3 in ?

khicau said:
Did you try to remove S3 in device manager in your PC and plug S3 in ?
Click to expand...
Click to collapse
There is no s3 in my device manager. Device manager doesn't show, in any way that I have my phone attached. No message, no change, even after repeatedly scanning for hardware changes. I've plugged this phone into 3 different computers and its the same on each. Thanks for the advice though! Any other ideas out there?

Install the latest drivers from the Samsung website. This should solve the issue.
Sent from my SPH-L710 using xda app-developers app

aez101 said:
My Phone
Hi, Uber-noob here. I have the sprint samsung gs3, Model number sph-l710, android version 4.1.2. I had stock rooted my phone via QBKing77's video (thanks man!) and had had no problems, including connecting my phone by USB (PDA net, Odin, etc.) to my PCs.
My Problem
For no reason I can see, my laptop(s) stopped recognizing my phone. There is no message, the pc acts as though nothing was plugged in, no message. Device manager shows nothing either. The ONLY sign that my phone was plugged in at all is the "battery charging" icon on my phone.
What I've Done
I use a good data cable that used to work, and have bought and tried a new one. I have tried 2 other computers. I have reinstalled the USB drivers. I have pulled the battery from my phone, waited, and put it back in. I just did a factory reset. Nothing has changed.
I hope someone here can help me figure this out, cause I'm stumped. Please let me know if I can provide any more info. Thanks!
Click to expand...
Click to collapse
You said you tried a good cable, but is it the original cable? My phone is kinda wonky some times when I don't use the original usb cable.
Sent from my SPH-L710 using xda app-developers app

DizzyMP said:
You said you tried a good cable, but is it the original cable? My phone is kinda wonky some times when I don't use the original usb cable.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Hi, it was actually the original cable that started messing up. The cable I have now was a replacement and I've had no problems with it whatsoever till recently. Thanks for the feedback though!

nick benedetto said:
Install the latest drivers from the Samsung website. This should solve the issue.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I did that just now. Unfortunately it didn't work. Thanks for the help! Any other ideas?

aez101 said:
I did that just now. Unfortunately it didn't work. Thanks for the help! Any other ideas?
Click to expand...
Click to collapse
I would still try another cable because I've cables quit working out of the blue before. Also, it may help if you go to device manager and uninstall/remove your USB hub and then restart your computer...it will automatically detect and reinstall it.

I would try with a linux livecd/liveusb to rule out a driver issue. Also try a different cable. Or make sure your cable works - try with another device or computer.
And there really should be no need for extradrivers if you plug it in a mass storage mode. At least my two phones work with Win7, Ubuntu and Crunchbang otb.
Sent from my HUAWEI P6-U06 using Tapatalk 4

aez101 said:
I did that just now. Unfortunately it didn't work. Thanks for the help! Any other ideas?
Click to expand...
Click to collapse
Open Dialer enter ##3424#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select MTP+ADB
Tap OK
Let me know if that does the trick

zordo said:
I would try with a linux livecd/liveusb to rule out a driver issue. Also try a different cable. Or make sure your cable works - try with another device or computer.
And there really should be no need for extradrivers if you plug it in a mass storage mode. At least my two phones work with Win7, Ubuntu and Crunchbang otb.
Sent from my HUAWEI P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
Hello, I'm not familiar with linux at all so that would be more of a last resort. However, I have tried multiple computers and a brand new data cable so that is not the answer probably. I appreciate the suggestion though!

hoesers said:
Open Dialer enter ##3424#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select MTP+ADB
Tap OK
Let me know if that does the trick
Click to expand...
Click to collapse
That was a good idea! But it didn't work unfortunately. I'm starting to think that I may have a bad micro USB port in my phone. But the phone charges just fine, so I dunno. I hope you have more ideas? Thanks a lot dor the advice!

Yeah could be one of the pins in the port is messed up. Would explain why it charges, but no data connection.

I swear I tried every suggested solution out there – uninstalling and reinstalling drivers. Rebooting in download mode and trying to get phone and PC top lay nice. I accessed all those hidden settings and poked around with the settings. Three hours of tooling around the web looking for solutions and I got nowhere. Then I came across some obscure site where somebody suggested the pins might be off. With the care of a surgeon, I slipped the tip of a knife into my phone's USB port and nudged it every so slightly. Plugged and in and there was that elusive USB symbol, offering up all those grand options. I would've bet anything that this was some complex driver issue, but no. It was a slightly bent pin in that tiny opening at the bottom of my SIII. I'm not sure if I should be elated or annoyed at all the time wasted. I hope you guys find your own solutions, whatever they prove to be. Yeeeeeeeeeeeeeesh.