Hey Guys,
Every time i slide out the game pad on my Xperia Play r800i the screen turns off and I have to wait about 10 seconds until it comes on again.Sometimes I can see that the screen is still on but it is really dim and very hard to see and sometimes the brightness keeps changing.
I used PC Companion and Repaired the phone but it did nothing.
Please Help!!
Nothing happened to your phone, its normal. It just takes time to load the xperia play app.
Sent from my R800i using XDA App
Gauravpreetsingh said:
Nothing happened to your phone, its normal. It just takes time to load the xperia play app.
Sent from my R800i using XDA App
Click to expand...
Click to collapse
No , When I slide it out the screen locks and I have it set NOT to launch the xperia play app.
So you probably have damaged flex cable. Be ready for giving your phone to the service centre soon.
Sent from my beautiful Xperia PLAY using xda premium
Well looks like my play has got the gray screen debating whether I'll keep it or not since I got the Xperia ion. I know I can fix it just need to fix the video cable I think that's what causes the gray screen.
Sent from my LT28i using xda app-developers app
sony has a factory protection film on the screen at xperia play.i have some scratches. can i remove it? or i will damage the screen?
Yes you can remove it. It won't damage it
Sent from my R800i using xda app-developers app
I'd recommend to put another screen protector if you remove because lots of people who got rid of it had touch screen problems layer
Sent from my Xperia Play (r800x)
abdel12345 said:
I'd recommend to put another screen protector if you remove because lots of people who got rid of it had touch screen problems layer
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
what screen problems?is not antiscratching the screen of experia play?
Well on spizzys thread he said that some of his friends that removed it their touch screen alignment was off
After a couple of months and sometimes things would get pressed even without touching it.
Sent from my Xperia Play (r800x)
abdel12345 said:
Well on spizzys thread he said that some of his friends that removed it their touch screen alignment was off
After a couple of months and sometimes things would get pressed even without touching it.
Sent from my Xperia Play (r800x)
Click to expand...
Click to collapse
I removed mine. No problem had occurred.
Sent from my R800i using xda app-developers app
JunDavis said:
I removed mine. No problem had occurred.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Well I guess if you take really good care of it there won't be a problem but if you take it off I'd still recommend placing another on in its spot
Sent from my Xperia Play (r800x)
ok thanks for the answers i will remove it and i put a new one
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
velan1 said:
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
I remember something that when u change ur digitizer you have to flash Stock firmware again.. something on those lines.. am not sure.. try searching that.
saqibkhan said:
I remember something that when u change ur digitizer you have to flash Stock firmware again.. something on those lines.. am not sure.. try searching that.
Click to expand...
Click to collapse
yup tried that also, can't find the solution. wanna know is it digitizer or mainboard
velan1 said:
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried flashing or anything? Maybe thw cable got damaged during install?
Sent from my LT28i using XDA Free mobile app
psxpetey said:
Have you tried flashing or anything? Maybe thw cable got damaged during install?
Sent from my LT28i using XDA Free mobile app
Click to expand...
Click to collapse
so it is not board problem, so i can try another cable...
IMHO, it's faulty slider flex cable
Ttry to power up phone with gamepad opened. If you get different screens with gamepad opened and closed (static screen, colored "snow", black screen etc) then it's surely slider flex cable
Tried with slider open but no change, only Sony Ericsson logo display for long time, lock and unlock it show static screen
Sent from my D5503 using XDA Free mobile app
velan1 said:
Tried with slider open but no change, only Sony Ericsson logo display for long time, lock and unlock it show static screen
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Did you try 're flash Rom etc
Sent from my LT28i using XDA Free mobile app
To flash a rom, it's not even entering in recovery, only Sony Ericsson logo appears and after that it gives static screen, even for custom kernel the logo appears that's all
Sent from my D5503 using XDA Free mobile app
HELP
Can anybody confirm it is not a main board problem, so i can buy a new cable and try again....
Umm i just received my xperia play.
It was used by someone else... but my problem is with touch.
Digitizer doesn't work... And it doesn't seems to be damaged.
Also highlighting of screen doesn't work propertly too.
It don't work, but it works in specific spot when i slide gamepad.
Anyone know where is the problem ? Slider tape? Digitizer?
Good chance it's one of what you mentioned
Sent from my LT28i using XDA Free mobile app