Umm i just received my xperia play.
It was used by someone else... but my problem is with touch.
Digitizer doesn't work... And it doesn't seems to be damaged.
Also highlighting of screen doesn't work propertly too.
It don't work, but it works in specific spot when i slide gamepad.
Anyone know where is the problem ? Slider tape? Digitizer?
Good chance it's one of what you mentioned
Sent from my LT28i using XDA Free mobile app
Related
Hi. When I wake my Desire, the screen is blank. However, the 4 hard keys are lit up, and a tiny crack at the bottom of the screen is lit up. When I put my finger at the slide to unlock, there is a small vibration, indicating that the phone is responsive but not the display. Issue persists after taking out the battery and reinserting.
Thanks in advance.
You mean that your screen doesn't work at all, or at wake up only?
Sent from my HTC Desire using XDA App
I'm guessing that your screen is broken (not the touch panel, the actual screen) because mines dropped the other day and the same thing was happening so I replaced the screen and it works fine now
Sent from my HTC Desire using XDA App
dexter93 said:
You mean that your screen doesn't work at all, or at wake up only?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
It doesn't work at all.
soyef said:
I'm guessing that your screen is broken (not the touch panel, the actual screen) because mines dropped the other day and the same thing was happening so I replaced the screen and it works fine now
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Was it covered by your warranty? Where did you replace the screen?
Well if it didn't worked when you got the phone and/or you haven't messed with it (did not drop, change radio...) (eg. it stopped working one day) and the warranty is valid,I don't see why it shouldn't be covered..
Sent from my HTC Desire using XDA App
I didn't bother with the warranty, I just got it replaced at a local phone shop
You could just order a screen online and try it yourself but make sure you order the right screen
Sent from my HTC Desire using XDA App
The exact same thing happened to me too. It went into service, they've replaced the screen and the motherboard (wtf?), and now it's all ok, all of this free of charge. Don't bother buying the screen yourself, just go the easy way. It might take a bit longer, but it sure is cheaper.
My xplay touch screen started to not work periodically. If I left the game pad exposed(in a playing mode) the screen would work flawlessly. Now the touch screen does not respond to any touch. The screen is perfact for veiwing. The game pad also works. The question is do i need a flex cable or a digitizer?
Any ideas
Have you tried testing your touch screen in the service mode?
Sounds like flex does the screen look like a static tv?
Sent from my LT28i using xda app-developers app
Screen is perfect
When it starts to not work lol what does it look like when its not working
Sent from my LT28i using xda app-developers app
the screen visually is perfect. the touch part does not
Digitizer is messed then
Sent from my Sony Tablet S using xda app-developers app
my touchscreen are not working well and not very responsive in some areas what is the problem can be?3months before i replaced slider flex cable and front speaker cable with the camera and all are worked well! thanks for your help
Sent from my R800i using xda app-developers app
masteril said:
my touchscreen are not working well and not very responsive in some areas what is the problem can be?3months before i replaced slider flex cable and front speaker cable with the camera and all are worked well! thanks for your help
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I have same problem dude, but i didnt replace anything Q_Q
flex or digitizer change
Hello, I had this problem too, this can be problem with a digitizer (I changed and worked well again)
In this video it is at 4:45, he put it on a left side
http://www.youtube.com/watch?v=vRjC19j2m48
Hello all, i am using galaxy note 2 7105 (LTE Version), i have an issue with S Pen whenever i want to use it it is just messing up, like i dont even touch it at screen and it starts working. if i wana write it will draw a line, scroll the movie automatically. what possibly has gone wrong here can anyone help?
doc55bds said:
Hello all, i am using galaxy note 2 7105 (LTE Version), i have an issue with S Pen whenever i want to use it it is just messing up, like i dont even touch it at screen and it starts working. if i wana write it will draw a line, scroll the movie automatically. what possibly has gone wrong here can anyone help?
Click to expand...
Click to collapse
Worst case scenario: broken s-pen digitizer. Best case scenario: software bug.
Did it always behave this way? Have you tried using different s-pens?
No it was fine since 2 weeks back it started like this. I tried other s-pen its working perfect and this s pen in that cell...messes up that too. But if its broken how did it happen? My cell never fell...so as s pen.
Sent from my GT-N7105 using XDA Premium 4 mobile app
I spilled coffee on my note 3 and the phone didn't seem to break, but I just noticed that my s pen doesn't work at all. Any ideas on how to trouble shoot this? It doesn't even recognize that I remove it from the phone.
Sent from my SM-N900V using XDA Free mobile app
doc55bds said:
Hello all, i am using galaxy note 2 7105 (LTE Version), i have an issue with S Pen whenever i want to use it it is just messing up, like i dont even touch it at screen and it starts working. if i wana write it will draw a line, scroll the movie automatically. what possibly has gone wrong here can anyone help?
Click to expand...
Click to collapse
Check if the nib of the pen (the small white part at the end) can be pushed inside. If it can't be pushed, pull it out gently. There should always be some play in the nib to allow for pressure variations. Had the same problem. Worked like a charm for me.
Sent from my GT-N7100 using XDA Premium 4 mobile app
farazlodhi007 said:
Check if the nib of the pen (the small white part at the end) can be pushed inside. If it can't be pushed, pull it out gently. There should always be some play in the nib to allow for pressure variations. Had the same problem. Worked like a charm for me.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yup i checked, the nib was kinda pressed inside and i somehow drew it out...it has gotten better i must say, now it wont mess up that much, i am able to work but not perfect. anyway, thanks to you, your solution has helped me bro.
doc55bds said:
yup i checked, the nib was kinda pressed inside and i somehow drew it out...it has gotten better i must say, now it wont mess up that much, i am able to work but not perfect. anyway, thanks to you, your solution has helped me bro.
Click to expand...
Click to collapse
Plus ,if you open your S Pen's button there is small screw to fix this problem completely.
Here is an tutorial...
https://www.youtube.com/watch?v=viDDKGPj2FI&feature=youtube_gdata_player
Sent from my GT-N7100 using XDA Premium 4 mobile app
You guys rock...my S-Pen is now....
Sent from my GT-N7105 using XDA Premium 4 mobile app
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
velan1 said:
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
I remember something that when u change ur digitizer you have to flash Stock firmware again.. something on those lines.. am not sure.. try searching that.
saqibkhan said:
I remember something that when u change ur digitizer you have to flash Stock firmware again.. something on those lines.. am not sure.. try searching that.
Click to expand...
Click to collapse
yup tried that also, can't find the solution. wanna know is it digitizer or mainboard
velan1 said:
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried flashing or anything? Maybe thw cable got damaged during install?
Sent from my LT28i using XDA Free mobile app
psxpetey said:
Have you tried flashing or anything? Maybe thw cable got damaged during install?
Sent from my LT28i using XDA Free mobile app
Click to expand...
Click to collapse
so it is not board problem, so i can try another cable...
IMHO, it's faulty slider flex cable
Ttry to power up phone with gamepad opened. If you get different screens with gamepad opened and closed (static screen, colored "snow", black screen etc) then it's surely slider flex cable
Tried with slider open but no change, only Sony Ericsson logo display for long time, lock and unlock it show static screen
Sent from my D5503 using XDA Free mobile app
velan1 said:
Tried with slider open but no change, only Sony Ericsson logo display for long time, lock and unlock it show static screen
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Did you try 're flash Rom etc
Sent from my LT28i using XDA Free mobile app
To flash a rom, it's not even entering in recovery, only Sony Ericsson logo appears and after that it gives static screen, even for custom kernel the logo appears that's all
Sent from my D5503 using XDA Free mobile app
HELP
Can anybody confirm it is not a main board problem, so i can buy a new cable and try again....