Develop Bugs

Installing Any Custom Roms On Your HOX With Any Hboot Version Without Updating Hboot.

Hi There.. Now i m going to show you how to install any custom rom on your HOX without updating your device bootloader or Hboot version.
Simply download any custom rom of your choice & extract boot.img from its Zip file, put this boot.img in attached folder and then run the (FLASHBOOT.bat) then enter fastboot on your device holding Volume Down+Power. Follow the instructions after installing boot img. Go to recovery wipe all user data & install zip from SD card & enjoy...Remember 1st make nandroid backup of your RUU before doing this..
Also Remember that it will never update your Hboot so you don't need to worry about this Its 100% gurantee..Enjoy::fingers-crossed:
My Device : Htc One X
Rom: Android Revolution HD 18X
Hboot: 1.12

How is this different than the normal way we flash roms?

I don't think that this way can flash jb roms without updating hboot
I see that u wrote that u have arhd 18 with hboot 1.12 but this can't be done because there is nothing special in ur way
It's exactly the same way as any one flash new roms and I read the script and all it can do is flash the boot.img by fastboot flash boot boot.img command which all is using it to flash boot
So where is the special thing that allows us to run jb on older hboots ???????????
Sent from my HTC One X using Tapatalk 2

I have succesfully installed CM-10 using this method which requires hboot 1.36 u can check. its android version is 4.1.2

yellowrose75 said:
I have succesfully installed CM-10 using this method which requires hboot 1.36 u can check. its android version is 4.1.2
Click to expand...
Click to collapse
Cm10 doesnot have an hboot requirement
Sent from my HTC One X using xda app-developers app

LOL CM10 runs originally only on the ICS boots , but with a modified boot.img which can be found in the cm10 thread you can boot it also on the JB hboots ! You clearly haven't done your homework mate ! I have this hboot for weeks already in my dropbox
All the sense based JB roms will ONLY work on JB hboots. The aosp/aokp roms is a whole different story
Sent from my GT-P5110 using xda app-developers app

yellowrose75 said:
Hi There.. Now i m going to show you how to install any custom rom on your HOX without updating your device bootloader or Hboot version.
Simply download any custom rom of your choice & extract boot.img from its Zip file, put this boot.img in attached folder and then run the (FLASHBOOT.bat) then enter fastboot on your device holding Volume Down+Power. Follow the instructions after installing boot img. Go to recovery wipe all user data & install zip from SD card & enjoy...Remember 1st make nandroid backup of your RUU before doing this..
Also Remember that it will never update your Hboot so you don't need to worry about this Its 100% gurantee..Enjoy::fingers-crossed:
My Device : Htc One X
Rom: Android Revolution HD 18X
Hboot: 1.12
Click to expand...
Click to collapse
Thanked by accident. What does this do that's different from flashing manually in command prompt?
Sent from my HTC One X using Tapatalk 2

Nothing .......
Sent from my GT-P5110 using xda app-developers app

we have to flash boot.img manually otherwise it got stuck in boot loop that's why we have to flash it manually.
i have tried this method on many roms..

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One X using xda premium

yellowrose75 said:
we have to flash boot.img manually otherwise it got stuck in boot loop that's why we have to flash it manually.
i have tried this method on many roms..
Click to expand...
Click to collapse
You don't say! What I mean is what does this do that we don't already do to flash the boot.img? How does this get around h-boot needing to be updated?
Sent from my HTC One X using Tapatalk 2

yellowrose75 said:
we have to flash boot.img manually otherwise it got stuck in boot loop that's why we have to flash it manually.
i have tried this method on many roms..
Click to expand...
Click to collapse
Yeah but what is the news on this, i know for almost a year that we have to flash a boot.img manually, because we have s-on devices. And tools to flash a boot.img, recovery.img, unlock codes are also out for months already......and the statement that you can do this with any JB rom is also false, try a jB rom with this on a ics hboot and it will def end up bootlooping. And running arhd 18 JB on your ics 1.12 hboot is just a plain lie ! That can't be done.....
My guess it's time to close this thread because you bring absolutely nothing new to the plate !

Thread closed
This thread is closed, because it's.
a) only providing trivial info (for the roms it even works on, that is)
b) has downright WRONG information in it (Sense-Roms are HBoot-sensitive, so you might create a bootloop when using your method)
So, OP, please, next time before you open a thread
1.) Check for which Roms your information is true
2.) Don't create a thread to tell people that it's dark at night
regards
jotha - forum moderator

Update Hboot with super CID

I want to upgrade my hboot to a newer version to install a sense based jb Rom.And I read only some CIDs are supported.mine is super CID which is not there in the list.so how can I upgrade my hboot?thanx
Sent from my HTC One X using xda premium

You should also have S-OFF ? Check that too, you can flash any firmware you like !

Mr Hofs said:
You should also have S-OFF ? Check that too, you can flash any firmware you like !
Click to expand...
Click to collapse
ITS S ON.So should i S off or what?

You can't make it s-off yourself unfortunately. But what does this command give for an output number
Fastboot getvar version-main

Mr Hofs said:
You can't make it s-off yourself unfortunately. But what does this command give for an output number
Fastboot getvar version-main
Click to expand...
Click to collapse
it says 1.29.401.11

Oke
Download this firmware
http://www.androidrevolution.nl/downloader/download.php?file=3.14.401.31.zip
Rename it to "firmware.zip"
Then relock the bootloader :
Fastboot oem lock
Then reboot to ruu mode and flash the firmware :
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Then reboot the bootloader, unlock it again with the token. Flash a custom recovery and install a new rom with a full wipe !

Mr Hofs said:
Oke
Download this firmware
http://www.androidrevolution.nl/downloader/download.php?file=3.14.401.31.zip
Rename it to "firmware.zip"
Then relock the bootloader :
Fastboot oem lock
Then reboot to ruu mode and flash the firmware :
Fastboot oem rebootRUU
Fastboot flash zip firmware.zip
Then reboot the bootloader, unlock it again with the token. Flash a custom recovery and install a new rom with a full wipe !
Click to expand...
Click to collapse
One more question.
I can use the same token I used to unlock the bootloader previously right?
Sent from my HTC One X using xda premium

Yes sir

Mr Hofs said:
Yes sir
Click to expand...
Click to collapse
Oh,,foolish me..mine is S off also as u said sir,,

Doesn't change the steps to upgrade the hboot

Mr Hofs said:
Doesn't change the steps to upgrade the hboot
Click to expand...
Click to collapse
Didn't work..stuck at sending when trying to flash firmwqre.zip in RUU.may be my hboot is too old.its 0.29 something.
Sent from my HTC One X using xda premium

So all other fastboot commands work ? Zip is in the fastboot folder ? Drivers correct ? This method works on all hboots. Doesn't matter how low.
It rebooted into a dark screen with a silver HTC logo ?

Mr Hofs said:
So all other fastboot commands work ? Zip is in the fastboot folder ? Drivers correct ? This method works on all hboots. Doesn't matter how low.
It rebooted into a dark screen with a silver HTC logo ?
Click to expand...
Click to collapse
Yup..all the others worked..only this last step gets stucked..I tried several times..tried rebooting computer,phone,installing drivers etc.nothing seems to work..may be something wrong with my PC.Ill try in another computer.thanx for your help.
Sent from my HTC One X using xda premium

Finally succeeded...I changed my cid to a deterrent one and flashed the hboot for that cid and it was successful.
Sent from my HTC One X using xda app-developers app

Oke mate, good job !
Enjoy
CASE CLOSED !,

Mr Hofs said:
You should also have S-OFF ? Check that too, you can flash any firmware you like !
Click to expand...
Click to collapse
i have an att htc one x+. s off and bootloader unlocked... so...youre saying that if i relock the bootloader, i can flash a different ruu other than what the device is?

Tmobilefan906 said:
i have an att htc one x+. s off and bootloader unlocked... so...youre saying that if i relock the bootloader, i can flash a different ruu other than what the device is?
Click to expand...
Click to collapse
That's something to ask in the hox + section. If you install a hox ruu on a hox + your phone will probably be dead !!!
But basically yes, NOT a ruu doe a different device. Just a ruu for a different REGION. like Asian or Europe. But also check the difference between GSM and CDMA units.
Be careful!

Mr Hofs said:
That's something to ask in the hox + section. If you install a hox ruu on a hox + your phone will probably be dead !!!
But basically yes, NOT a ruu doe a different device. Just a ruu for a different REGION. like Asian or Europe. But also check the difference between GSM and CDMA units.
Be careful!
Click to expand...
Click to collapse
There's not many. I only seen three on Androidruu.com

what can i do with this? Can u help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

doctor-who said:
what can i do with this? Can u help me?
Click to expand...
Click to collapse
What's the question?
---------- Post added at 10:29 PM ---------- Previous post was at 10:28 PM ----------
doctor-who said:
what can i do with this? Can u help me?
Click to expand...
Click to collapse
First off need fastboot getvar all

[Q] HTC One remote 12 signature verify fail

Hello, I am attempting to return my HTC One to Stock and I used the revone tool but it didn't put it back to locked status. Right now im in Tampered Relocked with S-On
I have the correct RUU for my version 1.10.605.10 but when I do a fastboot oem rebootRUU of that file it gives me the remote signature error.
Ideas on this??
Thanks much!

hi
r u still facing the problem if yes then i'll send you a PM

athristguy said:
hi
r u still facing the problem if yes then i'll send you a PM
Click to expand...
Click to collapse
I'm facing a very similar issue. I have a Verizon HTC One, Bootloader is LOCKED, and S-On. Tried using the correct ruu, but from what I've read, I can't flash that decrypted ruu without s-off. Do I have a pretty paperweight now? I've tried everything I can think of.
A side note, I do not have a custom recovery or OS installed, no adb, but I can use fastboot. Thank you!

droidmix said:
I'm facing a very similar issue. I have a Verizon HTC One, Bootloader is LOCKED, and S-On. Tried using the correct ruu, but from what I've read, I can't flash that decrypted ruu without s-off. Do I have a pretty paperweight now? I've tried everything I can think of.
A side note, I do not have a custom recovery or OS installed, no adb, but I can use fastboot. Thank you!
Click to expand...
Click to collapse
Two things about ruu.
You can only use encrypted version if s-on.
You cannot downgrade if s-on.
I suggest anyone wishing to go back to stock switch their s flag to on as the very last step.
I have a copy of the encrypted .10 ruu if you are currently on that firmware.
What does your boot loader screen say?
Sent from my Nexus 7 using Tapatalk

dottat said:
Two things about ruu.
You can only use encrypted version if s-on.
You cannot downgrade if s-on.
I suggest anyone wishing to go back to stock switch their s flag to on as the very last step.
I have a copy of the encrypted .10 ruu if you are currently on that firmware.
What does your boot loader screen say?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yeah I actually found an encrypted or signed .10 online and flashed it using fastboot. I had a Locked bootloader and S-on, so this really came at a good time. There was no OS on the phone and I only had access to fastboot. Thankfully I fixed it with this RUU.
If anyone needs the 2.10.605.1 ruu, here's exactly where I got it from (just fix the URL, I'm obviously a new user and can't post links):
flyhalf205. [com]/RUU/.direct_link_only/RUU_M7_WL_JB43_SENSE50_VZW_MR_VERIZON_WWE_2.10.605.1_Radio_1.12.41.1112_2_NV_VZW_3.71_002_release_341019_signed_2.zip
Downloaded that and flashed it via Terminal on OS X. Worked PERFECT. I'm so glad these forums are here as they helped me find this solution. Thanks!

droidmix said:
Yeah I actually found an encrypted or signed .10 online and flashed it using fastboot. I had a Locked bootloader and S-on, so this really came at a good time. There was no OS on the phone and I only had access to fastboot. Thankfully I fixed it with this RUU.
If anyone needs the 2.10.605.1 ruu, here's exactly where I got it from:
flyhalf205. [com]/RUU/.direct_link_only/RUU_M7_WL_JB43_SENSE50_VZW_MR_VERIZON_WWE_2.10.605.1_Radio_1.12.41.1112_2_NV_VZW_3.71_002_release_341019_signed_2.zip
Downloaded that and flashed it via Terminal on OS X. Worked PERFECT. I'm so glad these forums are here as they helped me find this solution. Thanks!
Click to expand...
Click to collapse
Good deal...
Sent from my Nexus 7 using Tapatalk

dottat said:
Good deal...
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
But this file is damaged and not flashable
Have anyone this .zip file ?
Simply I have situation when I cannot restore ROM , please help with right RUU files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

vsemoney said:
But this file is damaged and not flashable
Have anyone this .zip file ?
Simply I have situation when I cannot restore ROM , please help with right RUU files
Click to expand...
Click to collapse
I have newer ones posted. Did you want this older version?

dottat said:
I have newer ones posted. Did you want this older version?
Click to expand...
Click to collapse
I need any actual RUU zip for restore my One with worked system Android

@vsemoney
You need an encrypted ruu that is newer than what you have. Unfortunately, the newest is the only one I have. You cannot flash it via fastboot anymore either as attempting to will give you the same signature error. You must use the exe I have posted here. I repeat, you cannot flash this zip using any other method.
http://forum.xda-developers.com/verizon-htc-one/help/exe-ruu-vzw-m7-4-4-3-s-users-t2919442

dottat said:
@vsemoney
You need an encrypted ruu that is newer than what you have. Unfortunately, the newest is the only one I have. You cannot flash it via fastboot anymore either as attempting to will give you the same signature error. You must use the exe I have posted here. I repeat, you cannot flash this zip using any other method.
http://forum.xda-developers.com/verizon-htc-one/help/exe-ruu-vzw-m7-4-4-3-s-users-t2919442
Click to expand...
Click to collapse
Thank you for link
there are strange problems.
After I flashed successful newest Hboot from your post , right now I cannot go back in RUU mode and therefore, I can not use the RUU application
I have now after the command "fastboot oem rebootRUU" phone just reboots and is white screen with HTC logo infinitely!!!
What could be the problem?

Need BIG Help Please(for experts only)

Hello Guys, I can't install recovery on my HTC One X. I don't know what happened to HTC One X because it was given to me by my customer. I have installed recoveries and rooted so many HTCs but never came across problem like this
I'm stuck on Bootloop. Can't install recovery, can't boot into ROM
Tried so many solutions......
First of all what i did was i updated it's hboot to 1.39 by extracting firmware.zip from OTA Update
Everything went fine and it hboot was updated
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then i tried flashing 4 different RUUs by entering into RUU bootloader but they all got stuck on "writing zip...." left it for hour!
I tried everything like flashing custom recovery from fastboot or like flashing stock-signed recovery, fastboot erase cache blah blah....
I also tried by flashing separate img files boot, recovery, user etc...
No errors during flashing
Now the thing is i can't flash any firmware.zip file from RUU bootloader anymore. My bootloader is relocked, tried it by unlocking and relocking again but flashing went failed as i was thinking of updating hboot to 1.72
I mostly use Linux but i did try all these methods from Windows but nothing different
Details:-
ENDEAVORU XE SHIP S-OFF RL
CID-HTC__001
HBOOT-1.39.0000
Radio-5.1204. 162A. 29
Now i am charging HTC One X by a custom script made by someone else to charge it in fastboot

LinuxHolic said:
Now i am charging HTC One X by a custom script made by someone else to charge it in fastboot
Click to expand...
Click to collapse
OK first of all you have XE edition not PVT. In any case you can restore ICS witch RUU you try give the result from fastboot getvar all
All XE edition are S-OFF and most of them have problem with JB
EDIT: I see you flashed recovery witch recovery you flash can you go in recovery if not when you flash recovery run the command fastboot erase cache

Thant said:
OK first of all you have XE edition not PVT. In any case you can restore ICS witch RUU you try give the result from fastboot getvar all
All XE edition are S-OFF and most of them have problem with JB
EDIT: I see you flashed recovery witch recovery you flash can you go in recovery if not when you flash recovery run the command fastboot erase cache
Click to expand...
Click to collapse
Nope i flashed 5 different recoveries but still can't enter into them and i also tried fastboot erase cache
And now that's the problem. I can't flash anything in RUU Bootloader
Always getting that error...
There you go

LinuxHolic said:
Nope i flashed 5 different recoveries but still can't enter into them and i also tried fastboot erase cache
And now that's the problem. I can't flash anything in RUU Bootloader
Always getting that error...
There you go
Click to expand...
Click to collapse
First run the command fastboot erase cache
Flash Philz Recovery 5.15.9 with comand fastboot flash recovery recovery.img take the recovery.img from zip
After that run the command fastboot erase cache
after this go in bootloader phone not connected to the PC and go in recovery.
Other thing if you can't flash recovery any more or what ever you want to flash, check the battery voltage with this command fastboot getvar battery-voltage if the battery is under 3800mV you must to charge the phone read this THREAD for how to charge phone in bootloader.
Report with result!

Thant said:
First run the command fastboot erase cache
Flash Philz Recovery 5.15.9 with comand fastboot flash recovery recovery.img take the recovery.img from zip
After that run the command fastboot erase cache
after this go in bootloader phone not connected to the PC and go in recovery.
Other thing if you can't flash recovery any more or what ever you want to flash, check the battery voltage with this command fastboot getvar battery-voltage if the battery is under 3800mV you must to charge the phone read this THREAD for how to charge phone in bootloader.
Report with result!
Click to expand...
Click to collapse
Thanks for the help.
As i have mentioned above i tried everything
My battery voltage is 4009mV. I tried Philz recovery as you told me to but same result. Stuck on bootloop. Can't boot into recovery and ROM also

LinuxHolic said:
Thanks for the help.
As i have mentioned above i tried everything
My battery voltage is 4009mV. I tried Philz recovery as you told me to but same result. Stuck on bootloop. Can't boot into recovery and ROM also
Click to expand...
Click to collapse
OK last thing Lock the bootloader and runt this RUU
Report back!

Thant said:
OK last thing Lock the bootloader and runt this RUU
Report back!
Click to expand...
Click to collapse
The Rom update utility cannot update your android phone
Please get correct ROM for your phone.
Same error as always
Thanks for the help
Edit: Of Course i relocked the bootloader

LinuxHolic said:
The Rom update utility cannot update your android phone
Please get correct ROM for your phone.
Same error as always
Thanks for the help
Edit: Of Course i relocked the bootloader
Click to expand...
Click to collapse
Try with other ICS RUU not JB check they are a lot. This RUU in previouse post is the first RUU try with 2.17.401.x

Thant said:
Try with other ICS RUU not JB check they are a lot. This RUU in previouse post is the first RUU try with 2.17.401.x
Click to expand...
Click to collapse
RUUs tried so far:
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.12_Radio_2.1204.127.19_release_271851_signed
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
RUU_Pico_HTCCN_CHS_1.20.1400.7_Radio_10.34.80.09H_1.10.84.02_CHS_release_224342_signed
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_HK_3.14.708.28_Radio_5.1204.162.29_release_299865_signed

RUU with 2.17.401.x are mostly in .zip format. In .exe format their size is just 80-90mb/file :'/

LinuxHolic said:
RUU with 2.17.401.x are mostly in .zip format. In .exe format their size is just 80-90mb/file :'/
Click to expand...
Click to collapse
Ruu files always comes in exe ! Google for "Persian htc ruu" you will get to a site which provides a correct 2.17 !

Mr Hofs said:
Ruu files always comes in exe ! Google for "Persian htc ruu" you will get to a site which provides a correct 2.17 !
Click to expand...
Click to collapse
Changed my CID to super CID. Flashed almost 3 RUUs successfully. Still stuck on bootloop

Did you flash the 2.17 one ?

Mr Hofs said:
Did you flash the 2.17 one ?
Click to expand...
Click to collapse
Yea! 2 different 2.17 ROMs
Do you think its hardware fault?

Probably, if a ruu can't sort it......but unlock the bootloader, flash a custom recovery, wipe ALL even sdcard. Then relock the bootloader and run the 2.17.401 ruu again.

Mr Hofs said:
Probably, if a ruu can't sort it......but unlock the bootloader, flash a custom recovery, wipe ALL even sdcard. Then relock the bootloader and run the 2.17.401 ruu again.
Click to expand...
Click to collapse
Now that's the problem. As i have mentioned before i can't install anything not a custom recovery not any ROM and not even a stock recovery
Thanks for your help

Is there any command to wipe all sd card(mass memory) data through fastboot? cause i can't flash custom recovery at all!
Thanks

Ow btw the fastboot firmware command you used is wrong in the last screenshot. It's fastboot flash zip firmware.zip and not fastboot flash firmware firmware.zip !
And what's wrong with flashing a recovery ?
Edit :
So you can flash a recovery without errors but can't enter it ! Did you try the 3.14.401.31 ruu ?
Make a factory reset from the bootloader and then run the ruu again.
And another idea, I see your main is 3.20.401 did you use the firmware from that ota ? If so grab the 3.14.401 firmware and flash it, then run the 3.14.401 ruu !

Mr Hofs said:
Ow btw the fastboot firmware command you used is wrong in the last screenshot. It's fastboot flash zip firmware.zip and not fastboot flash firmware firmware.zip !
And what's wrong with flashing a recovery ?
Edit :
So you can flash a recovery without errors but can't enter it ! Did you try the 3.14.401.31 ruu ?
Make a factory reset from the bootloader and then run the ruu again.
And another idea, I see your main is 3.20.401 did you use the firmware from that ota ? If so grab the 3.14.401 firmware and flash it, then run the 3.14.401 ruu !
Click to expand...
Click to collapse
Sorry i was flashing with wrong command
So i did exactly what you told me to do. I grabbed the firmware file from 3.14.401.27 and flashed it and then i ran the RUU(3.14.401.27) exact version and it flashed my phone successfully. But still stuck on bootloop
Also tried by resetting from bootloader and running RUU again but no luck
Any other idea?

Thanks for helping me guys....

Please give me the correct rom

Salem
After update from wifi now my phone hangs on htc logo!
please give me the correct rom because i tryed a lot of roms without sucsess!
here is the information in the photo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thank you

Can some one help me?

hicvb said:
Salem
After update from wifi now my phone hangs on htc logo!
please give me the correct rom because i tryed a lot of roms without sucsess!
here is the information in the photo
thank you
Click to expand...
Click to collapse
With you being S-OFF you're able to flash any RUU file, just flash latest 1 to update hboot then reflash your recovery then install any rom you like, i use Android Revolution HD

wigankev said:
With you being S-OFF you're able to flash any RUU file, just flash latest 1 to update hboot then reflash your recovery then install any rom you like, i use Android Revolution HD
Click to expand...
Click to collapse
i flashed this rom:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
but i have error 159 in the end of process !!

hicvb said:
i flashed this rom:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
but i have error 159 in the end of process !!
Click to expand...
Click to collapse
Relock your bootloader then try to run again

wigankev said:
Relock your bootloader then try to run again
Click to expand...
Click to collapse
Same problem
i think it have a special firmware it is ENDEAVORU XE
is there any ruu file for this xe model?

hicvb said:
Same problem
i think it have a special firmware it is ENDEAVORU XE
is there any ruu file for this xe model?
Click to expand...
Click to collapse
You must to flash latest firmware manually and then Install custom ROM or stock. The XE edition is with problem most of the time.
EDIT: Give me the result from command fastboot getvar version-main

Thant said:
You must to flash latest firmware manually and then Install custom ROM or stock. The XE edition is with problem most of the time.
EDIT: Give me the result from command fastboot getvar version-main
Click to expand...
Click to collapse
C:\android>fastboot getvar version-main
version-main: 2.17.401.2
finished. total time: 0.112s
Can you give me a link to the correct firmware?

hicvb said:
C:\android>fastboot getvar version-main
version-main: 2.17.401.2
finished. total time: 0.112s
Can you give me a link to the correct firmware?
Click to expand...
Click to collapse
https://www.dropbox.com/s/v3mqj9z0whbprcs/PJ46IMG.zip flash this.

wigankev said:
https://www.dropbox.com/s/v3mqj9z0whbprcs/PJ46IMG.zip flash this.
Click to expand...
Click to collapse
installation aborted!
you mean i flash it with fastboot?

hicvb said:
installation aborted!
you mean i flash it with fastboot?
Click to expand...
Click to collapse
Flash with Fastboot

wigankev said:
https://www.dropbox.com/s/v3mqj9z0whbprcs/PJ46IMG.zip flash this.
Click to expand...
Click to collapse
Man stop plase all this thing are nothing to do with his problem.

wigankev said:
Flash with Fastboot
Click to expand...
Click to collapse
sending 'hboot' (2048 KB)...
OKAY [ 0.360s]
writing 'hboot'...
FAILED (remote: not allowed)
finished. total time: 0.561s

Thant said:
Man stop plase all this thing are nothing to do with his problem.
Click to expand...
Click to collapse
You mean there is no solution to my problem?

hicvb said:
You mean there is no solution to my problem?
Click to expand...
Click to collapse
Try unlocking bootloader again then try reflash that file again

hicvb said:
C:\android>fastboot getvar version-main
version-main: 2.17.401.2
finished. total time: 0.112s
Can you give me a link to the correct firmware?
Click to expand...
Click to collapse
Now you want to have working phone with stock or you want to have the latest firmware and custom rom.
If you want the first download this RUU relock the bootloader and run the RUU as administrator
if you want the second one I must to find firmware for the latest JB and give you instruction

Thant said:
Now you want to have working phone with stock or you want to have the latest firmware and custom rom.
If you want the first download this RUU relock the bootloader and run the RUU as administrator
if you want the second one I must to find firmware for the latest JB and give you instruction
Click to expand...
Click to collapse
Ok i am downloading ruu firmware , i'll post result

hicvb said:
Ok i am downloading ruu firmware , i'll post result
Click to expand...
Click to collapse
OK Your Bootloader must be relocked and run RUU as administrator. Now I am searching the latest firmware and I will give you instruction but it will be good first to charch the phone after installing the RUU.
EDIT: After 18 min I will upload the latest firmware with instruvtion how to flash it

Thant said:
OK Your Bootloader must be relocked and run RUU as administrator. Now I am searching the latest firmware and I will give you instruction but it will be good first to charch the phone after installing the RUU.
EDIT: After 18 min I will upload the latest firmware with instruvtion how to flash it
Click to expand...
Click to collapse
Firmware flashed succefully but the phone keeps rebooting

hicvb said:
Firmware flashed succefully but the phone keeps rebooting
Click to expand...
Click to collapse
OK then download this firmware.zip after this paste in your fastboot directory then:
1. You are with locked or relocked bootloader after this run fastboot oem rebootRUU
2. After this run the command fastboot flash zip firmware.zip TWO times wait the phone to finish
3. fastboot reboot-bootloader
Then download Philz 5.15.9 recovery and flash it with the command fastboot flash recovery recovery.img then run the command fastboot erase cache then go in recovery and charge your phone and mount sd card and copy your new rom.zip to a folder on the sd card. after this install it via recovery, after this flash the boot.img from rom.zip with the command fastboot flash boot boot.img and then fastboot erase cache after this reboot the phone and you will have working phone and REMEMBER If you want to install KitKat rom you must to flash latest CWM or TWRP or PHILZ but only on Philz5.15.9 sd card mountung work
Run the command exactly like I write you RUU must be with CAPS letter.
REPORT after all procedure