Related
I have searched high and low for an answer on how to replace a scratched screen of the SGS2 by yourself and have finally found the answer.
This will definitely VOID YOUR WARRANTY so don't say you haven't been warned.
I suggest you only use this guide if you were desperate like me. My phone didn't come with an official warranty so I was as good as screwed if I wanted a new screen.
Step 1: Obtain the part
Just ebay for lcd screen and digitizer galaxy s2 (however u may wish to buy it with the faceplate see below note). You want both the super amoled plus screen and the digitizer together. You can get this for about 120-130 USD.
There are some vendors that sell just the 'lens' but you need a specialized machine to replace it and is simply not worth the trouble.
Note that if you go to an original Samsung service centre, when they order the part, it comes together with the face plate and is therefore a breeze to install. This part is for sale on Ebay too. http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0. I would recommend you to buy this type instead of just the LCD and digitizer.
Follow this disassembly guide (not mine).
Now using a thin metal flat tool with a wide flat surface area, dig at the small gap from the top of the screen and pry the screen from the frontplate. It is held entirely by double-tape so don't worry about any screws, catches. Be careful of not damaging the bezel in the process.
Clean off the old black tape and double tape as best as u can, and be careful of the bottom buttons. The attachment shows how it looks like after cleaning it.
Reapply the double tape in strips and try to shape it to fit as much as you can. This is tiresome but necessary since the adhesive behind the lcd screen is very weak and you don't your screen falling out of you halfway.
Push it in and it should stick. That's it! Then reassemble.
Confirmed working!
thanks for the write up, do you have any more photos of your process?
OMG, it's like watching an autopsy.
Could a better resolution screen or even 3d screen be used/upgraded later on?
Nice to know for something happens, Hope not
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Man,,u shud handle it a bit gently ,,,,i mean,i flinched every time u "threw" the phone on the table.
On second thought, I might as well buy that screen protector
Sent from my GT-I9100 using XDA Premium App
wow that is the definition of T H I N !!!!!
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
Thanks also full part with bezel here http://www.ebay.co.uk/itm/Samsung-G...062?pt=LH_DefaultDomain_3&hash=item3cb9ff0e4e
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable
http://www.ebay.co.uk/itm/LCD-Touch...669?pt=LH_DefaultDomain_3&hash=item3cb9ff0cc5
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable Without Samsung logo
White house soon on site
psp888 said:
thanks for the write up, do you have any more photos of your process?
Click to expand...
Click to collapse
Unfortunately not at this time. I will do it the next time around (which will be soon as there is a slight imperfection with my button sensitivity so I might be inclined to try it again) but trust me it's not a beautiful process. Needs lots of guts. Nothing technical about it. Shove the flat tool in the gap and keep on loosening the glue as much as u can then take it off.
podgo said:
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Click to expand...
Click to collapse
It's more like cracked. I dropped it on some rocks from waist height and it cracked. It seems that gorilla glass is not shatter proof. There are also some scratches/mini cracks from where the rocks cut it.
Lesson learnt, get a screen protector that hopefully will reinforce it a bit more.
I wonder how these replacement parts compare to the quality of the original parts.
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
psp888 said:
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
Click to expand...
Click to collapse
There some listed as Super AMOLED+ screen just search on ebay or even drop the sellers a question about their iteams.
It is a Super Amoled + screen (don't see any difference in quality between the old and new one). Most sellers don't really know much of their products unfortunately but they do say it's original and I do believe mine is.
There's no Samsung print on the front plate but it does have a part number which corresponds closely to the original one. Everything else looks exactly the same, even the black sponge at the back and the microchips have Samsung wording on them.
BarryH_GEG said:
OMG, it's like watching an autopsy.
Click to expand...
Click to collapse
I have stomach to watch dead bodies, but not a GSII LOL
Dropped SGS2 from bikemount : broken screen.
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
DirkB19 said:
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
Click to expand...
Click to collapse
It is very easy to do. Just unclip each component and transplant it to the new case.
I have to do my friends one this weekend as he has dropped it and damaged the screen and the bezel .
I have managed to source the screen and the bezel for him all as one piece .
Now all the guides i have seen just rip the phone to pieces , surely if we have the right bits like i have bought this fix is very smple to do??
I am thinking it is just a case of undoing the 7 screws at the back of the phone , opening it up and then disconnect the screen cables from the mainboard . Does the whole front then come away??
If not i take it i have to undo the screws on the main board to release the screen? but this means the componets of the main board may come loose etc??
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
buxz777 said:
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
Click to expand...
Click to collapse
+1 for me.
I received my screen including bezel.
I've removed the main board just like the guy in the Youtube video.
But now I still have to transfer (from original front to my new front):
- the bottom PCB (where the microUSB sits)
- the camera
- the speaker
etc ...
I can not find a description/movie of how to do this ?
The bottom PCB for example has 2 screws, but after removing them the PCB itself looks like glued to the front assy'.
I prefer to see or get proper instructions before starting the rest of this adventure
...
PS : I got my part from aliexpress.com within 2 weeks (via airmail). It's with the Samsung logo on it and the package included all required tools (screwdrivers) to do the job. Would be nice to see some written instructions included as well.
Grtz,
DirkB
@MOD: POSTED HERE BECAUSE IT WAS ACCESSORIES RELATED. PLEASE MOVE TO Q&A SECTION IF IT IS NECESSARY
So, I was thinking that:
guys, if i buy a chunk of gorilla glass, can i cut it so it fits the phone? i have the steady hand and good precision, im asking if it work or not. and how much would a chunk of gorilla glass cost? I already got the glass cutting tool my present screen was scratched when i slid it on a normal wood table!! the scratch isnt bad, but really annoying if it reflects the light badly when in sunlight and... you get what im saying
no, you cant cut it with normal glass cutting tool...it is a hardened glass...if you try to do so it may break
metalfeild said:
no, you cant cut it with normal glass cutting tool...it is a hardened glass...if you try to do so it may break
Click to expand...
Click to collapse
can you point out a tool that can cut it? for the general knowlege or maybe practical
I don't think you get a gorrila glass just like in the market. And if you find a seller you would have to buy like huge sheet of glass or sth.
And if you find it, how are you gonna install it??
BTW wouldn't it look odd to have a glass elevation on your phone. If you want to change the touch screen just directly go to Samsung service center. I got my galaxy ace's screen fixed for Rs.2500
Sent from my GT-I5800 using xda premium
PersianSphinx said:
can you point out a tool that can cut it? for the general knowlege or maybe practical
Click to expand...
Click to collapse
sorry mate i have no idea...
ak700 said:
I don't think you get a gorrila glass just like in the market. And if you find a seller you would have to buy like huge sheet of glass or sth.
And if you find it, how are you gonna install it??
BTW wouldn't it look odd to have a glass elevation on your phone. If you want to change the touch screen just directly go to Samsung service center. I got my galaxy ace's screen fixed for Rs.2500
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
anything is possible 'IF' u are in china
metalfeild said:
sorry mate i have no idea...
anything is possible 'IF' u are in china
Click to expand...
Click to collapse
haha
at the other dude: i dont want the crappy plastic screen from samsung
PersianSphinx said:
haha
at the other dude: i dont want the crappy plastic screen from samsung
Click to expand...
Click to collapse
if u realy want to.....maybe u can cut it just like the glass display and replace the glass part all together....
but u will need alot of skill, and u will have to get gorrilla glass from somewhere ...
its expensive and u will have to probably have to buy a huge chunk.
not advisable and not even sure if its possible
you can buy maybe galaxy note screen then sand it to fit or something? I"m no expert about glass.
RafayelG said:
you can buy maybe galaxy note screen then sand it to fit or something? I"m no expert about glass.
Click to expand...
Click to collapse
good idea. why galaxy note when there is wildfire glass which is smaller and easier?
PersianSphinx said:
good idea. why galaxy note when there is wildfire glass which is smaller and easier?
Click to expand...
Click to collapse
because its larger so less chance of messing it up,
RafayelG said:
because its larger so less chance of messing it up,
Click to expand...
Click to collapse
fair enough! tnx for this... when i take of the crap sammy plastic, do i put the gorilla with glue? super glu?
PersianSphinx said:
fair enough! tnx for this... when i take of the crap sammy plastic, do i put the gorilla with glue? super glu?
Click to expand...
Click to collapse
i have no clue never did it and probably never will
here look in the service manuel dowload is on bottom
I don't think you can do what you are suggesting here. The screen on the phone is not plain glass or plastic, its a digitizer turning touch signals to system functions (hence the "touch screen"). You can't just take a gorilla glass panel and replace the digitizer.
i suggest you use a screen protector (vikuiti perhaps?), it's much cheaper and easier.
tomsi191 said:
I don't think you can do what you are suggesting here. The screen on the phone is not plain glass or plastic, its a digitizer turning touch signals to system functions (hence the "touch screen"). You can't just take a gorilla glass panel and replace the digitizer.
i suggest you use a screen protector (vikuiti perhaps?), it's much cheaper and easier.
Click to expand...
Click to collapse
i would thank you but i ran out of thanks per day maybe later.
thanks for this, i would probably have effed up my phone!!
i remember someones HTC touchpro wouldnt work without the special plastic when he pealed it off
my problem isnt having scratches mainly, its just the glass is so crap! sometimes i can see the lcd flick under my thumb when i use the phone (and im not pressing too hard either) i dont know why. and anyway the gorilla feels better when you touch it. lol i mean gorilla glass.
I agree with tomsi191, I think you'd loose the "touch" functionality.
Just don't press so hard on it !
lebidou said:
I agree with tomsi191, I think you'd loose the "touch" functionality.
Just don't press so hard on it !
Click to expand...
Click to collapse
i slid it across the table and it took visible scratches that look like they have been caused by a T-Rex.
PersianSphinx said:
. and anyway the gorilla feels better when you touch it. lol i mean gorilla glass.
Click to expand...
Click to collapse
PersianSphinx said:
i slid it across the table and it took visible scratches that look like they have been caused by a T-Rex.
Click to expand...
Click to collapse
mine got scratches from the zipper on the pockets of my jacket ?! i was too lazy to buy a screen protector
anyway you can buy a digitizer for about 20$ in ebay and there is even a video tutorial in youtube on how to change it
about the other problems you mentioned, it's not the digitizer, the lcd screen on this phone is crappy (probably the only thing crappy in G3)
tomsi191 said:
mine got scratches from the zipper on the pockets of my jacket ?! i was too lazy to buy a screen protector
anyway you can buy a digitizer for about 20$ in ebay and there is even a video tutorial in youtube on how to change it
about the other problems you mentioned, it's not the digitizer, the lcd screen on this phone is crappy (probably the only thing crappy in G3)
Click to expand...
Click to collapse
yea but if you had gorillaglass, the goddamn glass would protect the unblessed lcd... i dont have access to america ebay coz i live in the uk. so its pounds for me to spend, and i dont intend to do so, mainly because i hate giving samsung money for cheap crappy products
good news for me: my friend said he will give me his galaxy s2 when he gets the nexus. YAY!
u can do it
I allready made it on a old htc hd and a bb torch I will send pics and how to with the first chance
RafayelG said:
you can buy maybe galaxy note screen then sand it to fit or something? I"m no expert about glass.
Click to expand...
Click to collapse
lol.... y'du want to do that, U GOT A NOTE!!!
Hi.
my question says it all.
i have a perfect galaxy nexus screen. no weird grid. no weird uneven colors. nothing. just perfect. however, i have few scratches by mistake on the screen " digitizer it self "
is it possible to replace the digitizer without replacing the screen ? money isnt an issue even if its the price of a new phone. its just i have OCD and i do like my screen perfect.
so . is it possible to replace the digitizer alone ? " even if i have to buy them both lcd screen and digitizer ", i will keep the new screen extra for future
I don't think the digitizer is up for sell separately yet.
Sent from my Galaxy Nexus using XDA App
Smokeey said:
I don't think the digitizer is up for sell separately yet.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
thats fine BUT if i buy the sceen and the digitizer, can someone seperate them and install the digitizer on another screen ?
ll_l_x_l_ll said:
thats fine BUT if i buy the sceen and the digitizer, can someone seperate them and install the digitizer on another screen ?
Click to expand...
Click to collapse
I've read that the glass is fused to the housing and display but I'm interested in this as well as I have a spec of dust under my screen.
Sent from my Galaxy Nexus using xda premium
ll_l_x_l_ll said:
Hi.
my question says it all.
i have a perfect galaxy nexus screen. no weird grid. no weird uneven colors. nothing. just perfect. however, i have few scratches by mistake on the screen " digitizer it self "
is it possible to replace the digitizer without replacing the screen ? money isnt an issue even if its the price of a new phone. its just i have OCD and i do like my screen perfect.
so . is it possible to replace the digitizer alone ? " even if i have to buy them both lcd screen and digitizer ", i will keep the new screen extra for future
Click to expand...
Click to collapse
I'm unable to post links yet, so go to iFixit and search for "Galaxy Nexus teardown". Seems the screen and digitizer are fused together, sorry
ll_l_x_l_ll said:
...money isnt an issue even if its the price of a new phone...
Click to expand...
Click to collapse
Buy a new phone, keep other as a backup/media device?
zeekiz said:
Buy a new phone, keep other as a backup/media device?
Click to expand...
Click to collapse
like i said, i am OCD. i go buy new one, i will look for dead pixels/ un even colored screen/ stupid grid that shows weird lines in weird positions of the screen. its like hell for me to go through all that again.
firephoenix1985 said:
I'm unable to post links yet, so go to iFixit and search for "Galaxy Nexus teardown". Seems the screen and digitizer are fused together, sorry
Click to expand...
Click to collapse
i did go to that site before you post it. thanks for trying to help. however i am just wondering that even if they are fused together, can i still take them apart ?
i really dont want to lose that screen
Hopefully the overall quality will improve with the samoled displays in the near future and buying a replacement housing/digitizer will almost guarantie you a good result (dont hold me to it though, just wishfull thinking).. i have some micro scratching aswell (seems to be a normal problem with this device) but only really visable under a really strong super-led flashlight. I'm starting to feel ok with it however and decided to wait with getting a replacement till the price has gone down.
Sent from my Galaxy Nexus using xda premium
I read that one of the members here used a blow dryer on the screen and used a suction cup to remove the screen on their Galaxy S II. If these two devices were constructed similarly then this method may have some merit.
Sent from my Galaxy Nexus using xda premium
the "super" in super amoled means the digitizer and screen are fused together.
i dropped my phone from about 3 feet and broke under my screen but not the screen itself can anyone recommend a good company to buy these parts from??
There's a guy from HK selling it on eBay here. However that means that you'd need to change it yourself. I have looked at the ifixit website about the assembly of the device; however it depends on how comfortable each one is with changing it themselves.
It is quite expensive as well... I will still get a quote from Samsung prior to venturing with this option.
---------- Post added at 09:23 AM ---------- Previous post was at 09:15 AM ----------
To the OP
Where are you getting the digitizer from? If it is sold as fused with the screen, then there's not much trying to tear the combo apart and getting it to look like a machine job will be a challenge. I assume you'd need to build a clean room setup somehow...
Anyways you could possibly verify if the screen quality is to your standards with the eBay seller I mentioned above and buy on that arrangement; however getting the other side to agree/be honest may not be easy.
Instead, why not buy the best screen protector? Those wet ones you get nowadays. Not only will it get rid of the scratches but will also protect your phone for a long time...I think that is a better cheaper investment unless you are sitting on a pile of....cash...
Tjotte said:
Hopefully the overall quality will improve with the samoled displays in the near future and buying a replacement housing/digitizer will almost guarantie you a good result (dont hold me to it though, just wishfull thinking).. i have some micro scratching aswell (seems to be a normal problem with this device) but only really visable under a really strong super-led flashlight. I'm starting to feel ok with it however and decided to wait with getting a replacement till the price has gone down.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I have since this post received 2 more scratches and both is showing quite easy with screen off in normal lighting, last one i got today and that one´s really bugging me since it looks like something rubbed against the screen a few times.. I always.. always always! only keep my phone in my pocket on my jacket with a plastic zipper and only a microfiber cloth goes in the same pocket.. digitizer actually feels weaker then my old X10's which (apart from that i dropped it and cracked a corner a month before getting the GN) looks rather good to have been tossed around and been riding my workpants which has been everything BUT clean.. a few deep scratches but 18 months of abuse, i'd say it's in good condition! I refuse to put a screenprotector on this phone, initially i did get one.. that one scratched during installation using a regular creditcard and it just looked terrible with the peeling around the edges so, no more protectors.... and i (along with other here at the forum) believe that it is not actually the glass that scratches but rather the oleophobic coating getting scratches.. because the scratches are really really thin but clearly visible.. it's a shame.. but when the next scratch comes, i'm gonna stop being anal about it and just toss it in my right jeans pocket where the phones usually go.. never in my workpants though.. that would kill the coating in a day.
Hello, so here is my problem:
I have cracked my cornin gorilla glass , which i droped from from less then 1meter... such a nonsence since my last phone galaxy s was droped a dozen times and not a single crack, but that is not the point.
So now i have cracked glass, but digitizer touch, and lcd works fine, i have ordered a replacement glass. Only one thing bothers me, now in those places where crack had appeared there are yellow dots , not very bright and in other collors like black red you cant see them, only in white blue and yellow.
I know that these dots came from a presure, so my question is will they disapear if i will remove the cracked screen as it can keep the presure on them, and should i do it urgent or i can wait for my replacement and then remove it ? becouse basicaly i need the phone to use it, but if in case it will damage my phone to the stage when those dots will not disapear i will not risk it.
What suggestion can you tell me ?
Kind regards
You'll be lucky to separate the glass from the LCD, I'm afraid.
BenPope said:
You'll be lucky to separate the glass from the LCD, I'm afraid.
Click to expand...
Click to collapse
Well this did not answear my question
Ok, I'll try again. Removing the cracked glass is likely to destroy your LCD.
BenPope said:
Ok, I'll try again. Removing the cracked glass is likely to destroy your LCD.
Click to expand...
Click to collapse
well the question was about the yellow dots, how to remove the glass i watched on youtube and it is easy, just need to give some heat to make glue more flexible and it will easily pop off.
Hi
spec0s said:
well the question was about the yellow dots, how to remove the glass i watched on youtube and it is easy, just need to give some heat to make glue more flexible and it will easily pop off.
Click to expand...
Click to collapse
You can't replace the front glass alone without destroying the LCD. Yellow spots will be the least of your worries believe me. Do let us know how you get on.
Regards
Phil
PhilipL said:
Hi
You can't replace the front glass alone without destroying the LCD. Yellow spots will be the least of your worries believe me. Do let us know how you get on.
Regards
Phil
Click to expand...
Click to collapse
well i will get my glass in 2 weeks, so will write you of my progress later, but i would like to know will those spots dissapear if everything will go well, or should i order a new lcd... the dots are not so big but still.
About a year ago I dropped my Dell streak from around 30cm. Because of the way it landed this cracked the gorilla glass.
So I ordered just the glass part, as like yourself the rest worked fine.
I stripped it down and took the screen out then set about separating the glass from the screen. I also did as you have and watched various YouTube vids to assist this.
Let me tell you, from my experience it was 2 hours down the pan. I did get the glass off, after much pulling, tugging, wiggling, heating and cooling. Only to find in the process that the actual screen underneath had ended up only fit for the bin. So I had to order the full assembly instead, this was fitted no problem.
Just my opinion though, if you want to tackle it go ahead, its your phone.
As for the yellow dots, can't help you on that I'm afraid.
Sent from my HTC One X using Tapatalk 2
I was not a happy camper when I dropped my phone at work this morning and shattered the glass around the front speaker on my vzw gnex. Digitizer and led display are fine, so I'm looking to buy a new glass panel for it. Unfortunately, all the panels I see on ebay except for two are for the gsm one, not the cdma one. I know the battery door won't fit between the two, but the glass should, right? In the pictures everything looks to be in exactly the same spot. The two for the i515 are considerably more expensive than the i9250,which is why I ask.
For the record, I did pretty good; I got my first gameboy color at 6 or 7,and being just a few months away from 21 now, this is the first mobile handheld device that I've ever broken a screen on.
I remember reading on here somewhere that a person tried this and ran into all sorts of problems getting it to fit correctly. I tried searching but couldn't find the post. I would personally just recommend paying more for the i515 glass and knowing that everything will fit alright, rather than taking a chance on throwing your money away.
Sent from my Galaxy Nexus using xda premium
tristandespain said:
I remember reading on here somewhere that a person tried this and ran into all sorts of problems getting it to fit correctly. I tried searching but couldn't find the post. I would personally just recommend paying more for the i515 glass and knowing that everything will fit alright, rather than taking a chance on throwing your money away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I remember seeing that thread as well, I tried to find it, but could not.
justbecuz123 said:
I was not a happy camper when I dropped my phone at work this morning and shattered the glass around the front speaker on my vzw gnex. Digitizer and led display are fine, so I'm looking to buy a new glass panel for it. Unfortunately, all the panels I see on ebay except for two are for the gsm one, not the cdma one. I know the battery door won't fit between the two, but the glass should, right? In the pictures everything looks to be in exactly the same spot. The two for the i515 are considerably more expensive than the i9250,which is why I ask.
For the record, I did pretty good; I got my first gameboy color at 6 or 7,and being just a few months away from 21 now, this is the first mobile handheld device that I've ever broken a screen on.
Click to expand...
Click to collapse
A user was able to replace the i9250 screen with the i515 screen, but from the post, it said he ran into a whole bunch of problems and that if you don't know what you're doing, you shouldn't waste your time.
I would just play it safe and buy the screen that goes with the phone, unless you really want to save money and try it out, but you might waste money if you damage the screen during the process.
Sent from my Galaxy Nexus using xda premium
707BeastMode707 said:
I remember seeing that thread as well, I tried to find it, but could not.
A user was able to replace the i9250 screen with the i515 screen, but from the post, it said he ran into a whole bunch of problems and that if you don't know what you're doing, you shouldn't waste your time.
I would just play it safe and buy the screen that goes with the phone, unless you really want to save money and try it out, but you might waste money if you damage the screen during the process.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Are we talking about the glass or the whole display? It makes a big difference. Assuming all 3 displays are the same (i9250, L700, I515), the problem is separating the display from the frame plate. Its very difficult and you can crack it very, very easily if you try to remove it. The cheaper GN LCD's on eBay are from working units and those already have the frame plate attached to it. The only way to remove it is to use a heat gun and apply it on the top and bottom front areas (as well as the sides). The apply heat to the back frame plate to loosen up the adhesive in the mid section of the screen. Then, slowly and I mean very, very slowly try to pry it open using a thin blade. Start from the top and work your way down. You should stop if you meet too much resistance and reapply heat. Like I said its a pain in the ass and not for the timid. I got to successfully remove an LCD from a frame for a Galaxy S (i500) not too long ago, its a similar in process as the GNex
I also tried to remove a L700 LCD (cracked glass) from a frame a while back and cracked it even more. I know what I did wrong and I think I wont make that mistake again. My mistake was that I did not know the exact location of the adhesive and applied too much heat in the front. Another mistake was that I thought I could remove the front glass from the digitizer. Now I know this is almost impossible and I don't know how people can buy front lenses without using some type of special tools (a true hot air bga station for instance) or a technique that I'm not aware of.
So, that's my long rant right there. I would really appreciate if any of you can confirm that any all 3 displays are the same (i9250, l700, i515). If it is then I would dare to try it out and take some pictures in the process if all goes well.
What about the oven?
I used to be into cars, and it was popular to smoke the headlamps on Nissans. They also have a lot of glue in them, and it was recommended to put em in an oven lol.
I'm sure it would get hot enough to loosen the screen, but 400 degrees may break something else in the process...
Sent from my Galaxy Nexus using xda premium
Did anyone ever find the answer to this question? I am wondering the same thing.
skier354 said:
Did anyone ever find the answer to this question? I am wondering the same thing.
Click to expand...
Click to collapse
You can't use the i9250 screen on the i515. The battery metal thingies and the vibration thing are in different places.
skier354 said:
Did anyone ever find the answer to this question? I am wondering the same thing.
Click to expand...
Click to collapse
I have asked a bunch of eBay sellers for the last few days and have gotten mixed responses... I don't think that most of them get that I am talking about separating the display from the front case/plate. One guy told me that the digitizer/LCD combo is interchangeable from the i515 and i9250, but it won't work on the L700. One guy told me that he thought that the entire assembly including the front plate were the same between the L700 and i515. Several have said that they are model specific, but I don't think that most of them realized that I am not expecting to use the front plate from an L700 if i9250 on the i515...
It doesn't seem like Samsung would have a different display for each model. I can see the plates and cases being different because some of the other parts are different, but it seems like the LCD panel and the glass should be the same for each model. To me all of the screen connectors look the same from the pics I've seen...
Edit- I just found this online store that indicates they are the same screens http://www.globaldirectparts.com/OEM-Galaxy-Nexus-L700-LCD-Digitizer-Assembly-p/smsng6115350-qs.htm
tristandespain said:
I remember reading on here somewhere that a person tried this and ran into all sorts of problems getting it to fit correctly. I tried searching but couldn't find the post.
Click to expand...
Click to collapse
Finally found the post that you are referring to (http://forum.xda-developers.com/showthread.php?t=1780491). Sounds like he ran into problems because he tried to use the i515's front housing on the i9250. I think if he had removed the screen from the frame and re-used the frame that was original to his phone he would have been fine. It looks like it takes some heat and care to do that, but it looks do able.
I am ordering a L700 screen today and will report back on how it goes installing on my i515.
MrAreCool said:
I am ordering a L700 screen today and will report back on how it goes installing on my i515.
Click to expand...
Click to collapse
L700 screen (not including frame) worked on my i515. Details here.
Hi,
I have GT-I9250 phone and only that glass is broken. Touch and screen is fine. So if I bought this kit: http://www.ebay.com/itm/New-Outer-F...AU_MobilePhoneAccessories&hash=item5d371a5630
It's possible to change that glass or should i bought hole set? Digitizer+front cover + glass?
perusmuro said:
Hi,
I have GT-I9250 phone and only that glass is broken. Touch and screen is fine. So if I bought this kit: http://www.ebay.com/itm/New-Outer-F...AU_MobilePhoneAccessories&hash=item5d371a5630
It's possible to change that glass or should i bought hole set? Digitizer+front cover + glass?
Click to expand...
Click to collapse
I had a good LCD with broken glass that I was hoping to only replace the glass on and I ended up getting impatient and breaking the LCD. The glass is very difficult to get off. I tried heating it up and using fishing lines to separate the glass from the LCD, but I could not get very far. The glue seems to be spread over the entire surface and it does not take much prying to break the LCD.
Incidentally if the glass is shattered pretty badly you might have better luck than I did. I was able to get the broken "shards" off by heating up the screen and gently prying them off. Where I had trouble was the large section of unbroken glass. I tried to crack that glass to be able to continue to remove the shards, but I ended up breaking the LCD as well.
If you can't use the screen with the broken glass you might give it a go as you aren't really losing anything if you break it.
Good luck!
MrAreCool said:
I had a good LCD with broken glass that I was hoping to only replace the glass on and I ended up getting impatient and breaking the LCD. The glass is very difficult to get off. I tried heating it up and using fishing lines to separate the glass from the LCD, but I could not get very far. The glue seems to be spread over the entire surface and it does not take much prying to break the LCD.
Incidentally if the glass is shattered pretty badly you might have better luck than I did. I was able to get the broken "shards" off by heating up the screen and gently prying them off. Where I had trouble was the large section of unbroken glass. I tried to crack that glass to be able to continue to remove the shards, but I ended up breaking the LCD as well.
If you can't use the screen with the broken glass you might give it a go as you aren't really losing anything if you break it.
Good luck!
Click to expand...
Click to collapse
I have found few videos where that glass is possible to remove.
http://www.youtube.com/watch?v=JlfO6TUj1DQ
But I think that I would buy that whole set and change that. But what is the best place to buy that? So I can real deal.
Ok guys, just wanted to confirm that front glass for the L700 and GT-i9250 the same. And I assume that i515 as well.
I got for repair Nexus Sprint (L700) with cracked front glass but then was surprised that glass for L700 on ebay about $15 and the same glass for i9250 less then $10. Not big deal but anyway.. So I bought the glass for i9250 and it fits great as original.
Good luck!)
When the purchase of parts and mobile phones are not matched, the proposed replacement.