Develop Bugs

[ROM] Spike Speedy Edition v2.1 (XWJP6 version ready)

Version 2 spike speedy rom for galaxy released
Powered by voodoo lagfix Ver-5-pre6
Replace tw launcher with modified and faster tw launcher
No need to install base rom first.
Fully deoxed and zipaligned.
Rooted and Busybox
Recovery 2e
Removed :
Live wallpapers
All Samsung Widgets
Aldiko ebook
Allshare
Daily Briefing
Email
Layer
Latitude
Maps
Memo
Mini diary
Navigation
Places
Press reader
Talk
Tinkfree office
Voice dialler
Voice recorder
Voice search
Write and go
Added :
Voodoo Lagfix version-5-pre6
Modified touchwiz Launcher
Android Stock Lockscreen
Black wallpaper & nice status bar icon (nexus icon)
Be watchful:
This install will WIPE all user data.
Download :
XWJP6 Spike Speedy Edition v2.1
Mediafire
JPJPA Spike Speedy Edition v2.0
Mediafire
How to install:
You can find it in post 2
Pics :
For install default programs you can download programs below and rename zip file to update and copy it to internal memory and install it from recovery(2e)
Touchwiz
Live wallpapers
Islamic Programs
Aldiko ebook
Allshare
Email
Layer
Memo
Mini diary
Tinkfree office
BuddiesNow
Days
Flash Player from JP6
Voice recorder
Writeandgo
special thanks to :
Supercurio
DocRambone
Tayutama
kalpik

Install guide :
1. Disable any lagfix if have it installed
2. Make sure have the 2e recovery. If your rom is froyo and you don't have 2e recovery, use cf-root by chainfire
3. Make sure you have a backup of your /efs (not mandatory, but highly recommended).
4. Factory reset is NOT required, but is recommended. Wipe cache and dalvik cache if you’re not performing a factory reset.
Installation Steps:
1. Download the ROM and put Spike Speedy Edition v2.0.zip on your internal memory
2. Download clockworkmod recovery from here. You *need* Clockworkmod, this won’t work with stock recovery.
3. Rename the clockworkmod recovery file to “update.zip” and put it on your internal sdcard.
4. If you had Voodoo installed prior to installing this ROM (eclair or froyo), make sure you still have the "disable lagfix" folder inside "/sdcard/Voodoo". If you’re coming from sztupy’s kernel, make sure you have disabled all Lagfixes from CWM.
5. Shutdown phone, wait for it to power down, then boot the phone into recovery mode (press volume up, keep it pressed, then press home button, keep it pressed, then press power button, keep it pressed until you see the Galaxy S screen. Release all three buttons when you see it).
6. Select “apply sdcard:update.zip” (use volume rocker to move up and down, and home button to select). Clockworkmod recovery will boot now (you may have to do apply update.zip twice for Clockworkmod to show up).
7. Once in Clockworkmod, select “install zip from sdcard” (use volume rocker to move up and down and the back button to select).
8. Select “choose zip from sdcard” and then select Spike Speedy Edition v2.0.zip. Then choose yes.
9. The update will start (will take some 5 minutes) and during the flashing you will see some strange big characters on the screen, don’t worry, that’s normal. After the process finishes, you will be dropped back into Clockworkmod recovery. From there, choose go back, and then reboot phone.
10. The first boot will take some time as the ROM will deodex
Special tnx to kalpik for install guide.

nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...

Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx

Can you add polish locale to next release?

d.fx said:
Hey , really nice job with your rom . But i was wondering if you could make an update.zip with just the files needed to get the same theme?. I really like the theme lol.
Thx
Click to expand...
Click to collapse
i will do that
sardor said:
Can you add polish locale to next release?
Click to expand...
Click to collapse
ok , i will make update.zip for add many lang soon

eikka85 said:
nice rom. Only problem is that i got problem with market.
i get "download unsuccessfull" all the time when i try to download apps. any help how to fix this ?
edit : after wiping cache / facory reset ilost whole market app...
Click to expand...
Click to collapse
I tested market again and it works fine
You must check your connection

thanks spike the rom is nice and responsive. really nice job, keep up the good work.

Mirror for JPJPA version
Rapidshare

could u give the link of"all samsung widgets" plz?

hi
language romanian... please
thank!!

thanks sir ,, realy realy its perfect rom and hope to continue to v3

i cocked JPM/JP6 spike speedy and i upload it soon
be ready ...

Thanks sir but can you tell me whats the diffrent between jpa and jp6 and jpm in performance?

XWJP6 version added . go first post for download

How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...

xidium said:
How do you flash with part1 & part2?? Flash part1 via CWM then part2 right after??
Edit : Figured it out. Flashing now, will report back...
Click to expand...
Click to collapse
no
1- download two parts
2- extract with winrar to XWJP6 Spike Speedy Edition v2.1 folder
3- open XWJP6 Spike Speedy Edition v2.1 folder and copy XWJP6 Spike Speedy Edition v2.1.zip to internal memory ...

Whats languages in this rom and changelog?

hi
thank.. jp6..
I need maps (update.zip)

plzzzzz.i want "All Samsung Widgets" in my galaxy.

ROMS,Calibration,tweaks

i decided to compile things for newbies like me so we stop makin a foll of ourselves asking around etc...
i will be compiling links tocustoms roms and things that i think and others think maybe of great significant to our devices
first is the FAQ guide,,
this contains rooting and other cool stuff
(i may include links outside xda if needed)
http://forum.xda-developers.com/showthread.php?t=1512749
http://forum.xda-developers.com/showthread.php?t=1325453
rooting tip:
since basically rooting will or might void warranty right,so ill share what i did to a friends phone...
basically just created a nandroid back up of his current rom using skins recovery..
then installed a new custom rom(rooted rom)
voila...2 bird 1 stone,,,custom rom and root at the same time...
and in case you want the old one back just restore to back up..
not sure if this method counts the bin....
here is for the list of updating to official and unofficial stock roms
http://androidadvices.com/update-samsung-galaxy-s5360-xxkk6-gingerbread-235-firmware/
http://forum.xda-developers.com/showthread.php?t=1325453
http://forum.xda-developers.com/showthread.php?t=1465800
CUSTOM ROMS
Creeds
http://forum.xda-developers.com/showthread.php?t=1453286
Repencis
http://forum.xda-developers.com/showthread.php?t=1516037
MySS
http://forum.xda-developers.com/showthread.php?t=1518439
Hybrid
http://forum.xda-developers.com/showthread.php?t=1465405
Blazing Hatred
http://forum.xda-developers.com/showthread.php?t=1508053
Sense Aurora
http://forum.xda-developers.com/showthread.php?t=1506927
Terma Rom
http://forum.xda-developers.com/showthread.php?t=1520167
Infected
http://forum.xda-developers.com/showthread.php?t=1446677
Emerald
http://forum.xda-developers.com/showthread.php?t=1492418
Aurora V2
http://forum.xda-developers.com/showthread.php?t=1538616
Chobits
http://forum.xda-developers.com/showthread.php?t=1573306
Bazzrom
http://forum.xda-developers.com/showthread.php?t=1557740
CM7
http://forum.xda-developers.com/showthread.php?t=1583959
Tweaks
ram and battery life tweaks by [email protected]
http://forum.xda-developers.com/showthread.php?t=1491714
Beats
http://forum.xda-developers.com/showthread.php?t=1526643
Guide to A2sd
http://forum.xda-developers.com/showthread.php?t=1524940
Build prop
http://forum.xda-developers.com/showthread.php?t=1533688
(note build prop edits here are from other device pick the thing that you feel will be applicable)
http://forum.xda-developers.com/showthread.php?t=771232
http://forum.xda-developers.com/showthread.php?t=1533688
Sd Card Partitioning
http://forum.xda-developers.com/wiki/SD_card_partitioning
make your back keys vibrate
http://forum.xda-developers.com/showthread.php?t=1463510
Recoveries
Skins
http://forum.xda-developers.com/showthread.php?t=1446796
Madteam
http://forum.xda-developers.com/showthread.php?t=1467492
Fix Earphone Issues if you have any
http://forum.xda-developers.com/showthread.php?t=1469034
sgy manual
http://forum.xda-developers.com/showpost.php?p=22372536&postcount=1
ROM SURVEY and Discussion
http://forum.xda-developers.com/showthread.php?t=1511345
From MAI77
some few custom ROMs change MAC addr of wifi, thereby keeping them from reregistering immediately in WLAN if "access point" limits via MAC#
From Ronnieryan
ronnieryan said:
here's the drivers
http://depositfiles.com/files/3raqcskp2?subid=141468
anyways if you want smart keyboard, just PM
Click to expand...
Click to collapse
ALSO Adding the Elusive CREEDS ROM LINK NOT THE NANDROID one,,the original one please refer to creeds for the installation procedures
maybe uploaded files that u downloaded are broken..i will upload now the creeds ROM i downloaded b4
http://www.mediafire.com/?wc2xxkg83wa8bvu,5fgy69r5yw7hpnu,swtzbbod5nsnq7q,yzzjcy3hdgzkow0
the files are aranged from 1-4, proper install
for AOSP and 2.1
http://www.mediafire.com/?eecmc4fu8abgy12,g8y4cee45utp190
thanks to ronnieryan
KERNELS!!!!Finally!
Press Thanks For Maroc-OS & Rate 5 Stars
Files Needed :
Odin3 1.84 : http://www.mediafire.com/?y7v62dq119suj8r
Odin 1.85 : http://www.mediafire.com/?zgqfh954k9flr47
Versions:
Test Kernel :http://www.mediafire.com/?0j6guwgg60opj7y
Alpha v0.1 :http://www.mediafire.com/?1rsf19z8qgl1qu6
Alpha v0.4 : DELETED
Alpha v0.5.1 DELETED
Alpha v0.5.2 http://www.mediafire.com/?4p6sfran2si6f3j
Alpha v.0.5.7 http://www.mediafire.com/?fzndkvldkhais0g
V0.6 RC 80 http://www.mediafire.com/?xdkh1n2owok72cx
V0.7 RC 10 http://www.mediafire.com/?1vx122767j43z4f
INSTRUCTIONS :
Short Flashing Guide
- download the .tar file
- install Kies, or Samsung driver pack
- download Odin3 1.84 or 1.85 (download links above)
- stop Kies
- stop all active ADB sessions
- start odin
- power off Your SGY
- boot into download mode
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
- in the PDA field, browse for the kernel tar
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
OR
Flash Kernel Without Increasing Custom Bin Count
Special Thanks to FAQBLY For This Wonderful zip
faqbly has compiled a script that can flash boot.img from CWM Recovery and it will not increase Custom Bin Count.
Benefits
You can Install Custom Kernel without increasing your Custom Bin Count.
Below is the ZIP file from faqbly
http://www.mediafire.com/?26928er6dqmucrm
Instructions:
In the .zip file provided by faqbly, you have to replace the boot.img with the boot.img from the tar file of a kernel
Example would be to download kernel from Maroc-OS
You Will Have A .tar file that contains the boot.img
Extract boot.img from tar, and place it to the zip by faqbly
And flash via CWM Recovery
Apps Needed
A2SD : http://www.mediafire.com/?86t3oztvoyb0dul
Droidwall : http://www.mediafire.com/?mcxb6y8qg26mfg3
No-Frills CPU:http://www.mediafire.com/?ow3r7zl96chd9kp
If Ever Problem Occurs, Just Flash Back To These Kernels
Stock http://www.mediafire.com/?dzfcrhb8fj3s40x
Terma Kernel http://www.mediafire.com/?81d1acx1c19m9k5
Test Kernel http://www.mediafire.com/?0j6guwgg60opj7y
Originally Posted by mai77 View Post
this reports aims to stay concise & readable and maintains hyperlinks to posts in this large thread, that contain specific info, especially the source code to solve a problem or add a feature. If you come across another code snippet from the Android world, that could improve SGY OS: post it in this thread ! kernel testers can switch between kernels without changing the rest of the system, here is a drop-in-replacement stock kernel to exchange for our custom kernel, flash as PDA with ODIN.
Kernel wish list / feature list
unreported __ EXT2/EXT3 & EXT4 support. (just kernel support, still need scripts to convert blocks)
unreported __ System/Cache & /Data mounted as EXT4 R/W. (needs fixes)
unreported __ Added /Data mount, IO Scheduler and CPU Governor Feature (Conservative, Ondemand, Powersave & Userspace governors are enabled)
Neg report __ NETFILTER Compatibility with DROIDWALL /// report on 0.6 -80, 0.7
unreported __ INIT.D Support
unreported __ Root Support (su). (currently DELETED)
Neg report __ "adb root" support , default.prop file /// report on 0.6 -80, 0.7
unreported __ Overclock / Undervolt support : at 1GHz, but needs some fixes
unreported __ Best ZYGOTE Service for Detailed CATALOG
unreported __ recovery in Read/Write mode
unreported __ some improvements & fixes, bmlunlock
here is the thread
http://forum.xda-developers.com/showthread.php?t=1550065
HOW TO FLASH KERNEL GUIDE THE EASIEST WAY
Requierements:
boot img file (2 the kernel your flashing and termagrancis kernel)
mai77 flasher thingy
and cwm of mads or skins...
procedure:
download the kernel respectively,both kernels are on tar file do you need to extract them using any extarctor (for me i used androzip form market)or tyu can use es file manager...
extract them on sdcard one file at a time and rename them
example kernel 1
after extrract rename boot.img to boot.imgx
do the same thing on the other kernel,but rename differently...
now,,,decide which kernel to flash..
example
i renamed
boot.imgx(marcos kernel)
boot.imgz(terma kernel)
i will flash
terma kernel
rename or remove the other letter
the kernel you wnat to flash should have the boot.img name,.
now go to recovery..
install via zip
choose sd card update
choose SGYbiCWM.zip
and apply reboot,,,
youre done,.,,!
check under settings kernel...
this was the method ive opersonally used
http://forum.xda-developers.com/showthread.php?p=23803175#post23803175
LOST PHONE>>
http://forum.xda-developers.com/showthread.php?t=1572006
BATTERY CALIBRATION!
AUTION: DO THIS PROCEDURE ONLY ONCE OR TWICE, FULLY DRAINED BATTERY CAN CAUSE CRYSTALLIZATION WHICH SHORTENS BATTERY LIFE.
HAVE CWM INSTALLED INCASE YOUR STOCK RECOVERY HAS NO ADVANCED OPTION.
1. Fully drain your battery, play some games, music, etc.. NO PORN!!
2. Let your battery cool for atleast 2 minutes
3. Restart phone to remove residual charge( it will boot only halfway)
4. After the phone shuts down remove battery and let it cool for atleast 2 minutes.
5. Re insert battery and charge your phone in OFF mode.
6. After the phone reaches 100% charge boot into recovery (Power+Home+Volume_up button)
7. Go to advance (I think some android has this in recovery, if not go to CWM and you will find it there).
8. Wipe battery stats.
9. Press Power/Back and Reboot your phone
10. Wait till the phone reaches 100% charge and disconnect charger
11. Have a happy life.
Before my phone has a battery life of less than a day (about 20 hours) with battery saver, task killer and minimal settings. After calibration my phone without task killer and battery saver installed lasts short of 3 days with moderate settings. I use only a Ram cleaner and V6 fast engine flush now. "Cleaner" apps are good, "Killer" are not..
THIS IS A BATTERY CALIBRATION PROCEDURE NOT A BATTERY LIFE EXTENDER(THERE IS NO SUCH THING), JUST SAYING SO THERE IS NO CONFUSION.
taken from
http://www.symbianize.com/showpost.php?p=10845667&postcount=14
Arrow Creed's 2.0 (ICS inspired) installation guide
As per request here is the original thread for files and photos
http://forum.xda-developers.com/showpost.php?p=22219562&postcount=97
This is a Creed's 2.0 installation guide. Only for Samsung Galaxy Y (GT-S5360)
Make sure you are on 2.3.6 Gingerbread
Before we start, make a cwm back up of your current rom
How to back up:
1. Place "skin1980cwm zip" to the sd card (needed files are attached below)
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Use the volume up and down key as your scroll key and choose "appy update from sdcard"
4. Choose "skin1980cwm.zip" (use the home button to select)
5. You will be in a new interface (yellow fonts)
6. Go to "restore and back up"
7. Select "back up"
8. Wait until back up completes then reboot
note: If something goes wrong, just "restore" your back up using cwm
Creed's 2.0 (with 14 toggles and swipe to remove notifications)
Features:
*Soft Root- SU
*Pre Deodexed
*ZipAligned
*Maps With WorldWide Navigation
*Bloatware Removed
*BusyBox Support
Message App:
*No Auto Sms To Mms Conversion
*No Receipient Limit
*Built In 5 Theme
Touchwiz App(Samsung Home) :
*Transparency Level Increased
*Alphabetical Auto Arrange
*Landscape Orientation Introduced
*Auto Brightness Option in Display
*Boot Animation Enabled
*Custom Boot Animation Added
*Custom Power On Sound
*Reduces Startup Time ~Less Than 13 seconds
14 Status Bar Toggles
*All 5 From Samsung(Wifi,B/T,Soung,GPS,Orientation)
*Data
*Lockscreen-Off
*FlashLight
*Shut Down Options (Reboot,Recovery & Download mode)
*Airplane Mode
*Brightness
*Auto Synchronise
*Screen Timeout
Default wallpaper
Things (files) you will be needing:
(1) update.zip (if you are not yet rooted to by-pass system commands)
(2) Skin1980cwm.zip
(3) creed's 2.0 zip
download from here
Creed's Rom 2.0
(4) boot animation fix zip
(5) 14 toggles zip
How to root: (required)
1. Place the "update.zip" in your sd card
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Select "apply update from sdcard"
4. Find the "update.zip" and select it (using the home button)
5. wait to finish then restart phone
Creed's installation instructions:
1. Place all the (4) needed files in your sd card
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Use the volume up and down key as your scroll key and "wipe data and "wipe cache"
4. After wiping, choose "apply update from sd card"
5. Choose "skin1980cwm.zip"
6. You will be in a new interface (yellow fonts) then select "install zip from sd"
7. Find "Creed's 2.0 zip" and select
8. Wait for installation to compete (3-5mins)
9. Restart phone
note:
After installing Creed's rom 2.0 install the "boot animation fix zip" first
then the "14 toggles zip" using the same method as above (except for #3)
"Swipe to remove" notifications instructions:
note: extract the "swipe to remove" rar file (contains two files)
1. Download "root explorer"
2. Open "root explorer" and go to your sdcard
3. Set the permission from r/o to r/w
4. Copy the "framework.jar"
5. Paste it to the system/framework folder
6. Set permissions to rw-r-r
repeat the procedure with the "systemUI.apk" (place it on system/app folder)
note: you will encounter a lot of force close (normal) but just go on
7. Press the power button and restart the phone
"DroidX" boot animation (alternative)
1. Open "root explorer" and go to your sdcard
3. Set the permission from r/o to r/w
4. Copy the "bootanimation.zip"
5. Paste it to the system/media folder
6. Set permissions to rw-r-r
7. Restart the phone
Fonts (alternative)
Roboto
Sweet Confusion
Ubuntu R
Comicbook Commando
Chocococky
More fonts here
1. Place on sdcard
2. Click and install
3. Go to "Display"
4. Go to "screen display"
5. Go to "font style"
6. Choose the font that you like
TweakZV6 Performance Scripts
note: make a cwm back up (for emergency)
1. Place "TweakV6.zip" on sd card
2. Go to recovery mode (press volume up + power button + home button all at the same time)
3. Use the volume up and down key as your scroll key and choose "appy update from sdcard"
4. Choose "skin1980cwm.zip"
5. You will be in a new interface (yellow fonts)
6. Find "TweakV6.zip" and select
8. Wait for installation to compete
9. Restart phone
Credits to:
pratyush.creed (creed's rom 2.0)
budyisdead (swipe to remove notification)
evanlocked (DroidX boot animation)
krishna_nirvana (update zip)
Skin1980 (skin1980cwm zip)
[email protected] (tweakzV6 zip)
SethDeCode'z (fonts)
feel free to add..
i will add if i find or deem anything useful..

<post deleted>

thanks I'll merge it asap

Add that there isn't a CM/MIUI port for SGY yet while you're at it Anant.
Although my hopes that newbies will go there before making a new thread is almost nil. *-*

silvane
well i am guessing that aswell....but will still try for our references an index And help page is what i am aiming will complete in 2 days....
Sent from my GT-S5360 using Tapatalk

Thread moved to general and stuck!

great thread!
very useful!

nice thread good work

galaxy y
plz tell me how to increase or make use of sdcard as internal memory for my samsung galaxy y and i currently rooted my phone and i have gingerbresd 2.3.6. Which customrom is suitable with better features

u can use custom rom like,creeds v2.0,repencis v2.0 or hybrid 2.0,these rom r good and less bugs.. use link2sd or a2sd.. in link 2 sd u need to partition ur sdcard to make it work..

some few custom ROMs change MAC addr of wifi, thereby keeping them from reregistering immediately in WLAN if "access point" limits via MAC#
pls put in guideline

nice writeup

mai77 said:
some few custom ROMs change MAC addr of wifi, thereby keeping them from reregistering immediately in WLAN if "access point" limits via MAC#
pls put in guideline
Click to expand...
Click to collapse
Added on first page
Sent from my GT-S5360 using Tapatalk

Hey mai would be glad if you added my thread in tweaks
link
**Thanks for adding i thanked ya **

[email protected] said:
Hey mai would be glad if you added my thread in tweaks
link
Click to expand...
Click to collapse
Will add after a day or two mate
Sent from my GT-S5360 using Tapatalk

Nice Thread

i had rooted my phone through CWM , does my custom bin counter increased??

aman.droid said:
i had rooted my phone through CWM , does my custom bin counter increased??
Click to expand...
Click to collapse
no...bin counter if you flash updates using odin

thumbs up for this!!
very useful guide for newbies!!

Thanks for the useful info.

Samsung Galaxy SIII Softkeys for GNEX - Alpha

I made the Samsung Galaxy S3 hardkeys to Galaxy Nexus Softkeys.
Flashable with Metamorph or do it manually.
Did not try it, hope someone else can do it because my GNEX is in reperature.
Please post some screens if you flash it, so I can see and make it better, some updates etc.
DOWNLOAD LINK: http://www.file-upload.net/download-4445951/GalaxyS3SoftgeysForGNEX.zip.html
Tutorial:
MetaMorph
Download and install MetaMorph from the Market, open it at least once so that the folder AndroidThemes will be created on /sdcard/
Download a Softkey Style using the MetaMorph link and move this .zip file to /sdcard/AndroidThemes using your favorite file explorer
Open MetaMorph, choose "Unzip/Extract new theme" and select the .zip file you downloaded. A popup screen will appear, meaning it has been extracted. Press the "Close" button.
Hit the "Apply all!" button and wait +/- 5 seconds (nothing will happen)
Reboot your phone immediately after this and you're done! Oh, and set a new wallpaper because it may be restored to default..
(Phone can hang in "SystemUI has been ended". Just pull out battery and restart phone.
2. Advanced (Hard) Method - Edit the SystemUI.apk from your phone - thanks to bangdrum! Not working for everybody!
Download and install Root Explorer from the Market and make a Nandroid backup
Download the softkeymod you like
Open Root Explorer and navigate to /system/app/, find SystemUI.apk, long press, and select extract. Go to the folder sdcard/speedsoftware/extracted and make sure you have a folder that's called SystemUI
If the folder is there navigate to where you downloaded the chosen softkeymod (usually sdcard/download) and long press it. Select extract all. Go to sdcard/speedsoftware/extracted and there should be a folder with the name of the softkeymod.
Click on this folder, and also on the next. Hit the menu key and press 'Multi Select'. Highlight all the images included in the folder and select 'Move' at the bottom. Navigate back to the SystemUI folder, go to SystemUI/res/drawable-xhdpi and 'Paste' here. A command prompt should pop up asking to replace the current images. Select 'Yes For All'
Go back to the sdcard/speedsoftware/extracted folder, long press the SystemUI folder and select 'Create ZIP'
Rename the created SystemUI.zip to SystemUi.apk and move the SystemUI.apk to your /system/app folder. Change permissions of SystemUI.apk to rw-r--r--
Reboot your Galaxy Nexus (pull battery out and reboot, this is an essential step) and your softkeys will be modded!
Credits to: atticus182 (http://forum.xda-developers.com/showthread.php?t=1413582) for tutorial and search button !

I have the download fail a couple times before it takes but then it says bad .zip file...mind just posting the .PNG images her so us folks on AOKP can just plug them in through ROM control.

This^^

here is the link for the png-pictures for CDMA users:
http://imageshack.us/g/513/icsysbarback.png/

Touchwiz launcher Android For All Devices {root only}

Here is the touch whiz launcher for Android
for original thread move here[http://skytech101.blogspot.com/2013/05/install-galaxy-s4-touchwiz-launcher-on.html]
Instructions
1. Download the launcher with proper resolution for your device and transfer it your root of SD card (not in any folder for convinience)
2. Backup your current ROM from “backup and restore” option in recovery (for safety but you can skip this step)
3. Go to "Advanced" and "Wipe dalvik cache" (do it before and after installation)
4. Now select "Install zip from sdcard" and then select the downloaded file and flash it
5. Go to "Advanced" and "Wipe dalvik cache” once again.
6. Get back and Reboot
Now as you press you home key you will have a TouchWiz launcher option. Viola it means you have successfully installed Touchwiz launcher off Galaxy S4 on your Non-Touchwiz device. Enjoy...!!
mod edit >>> link removed
mod edit >>> link removed
mod edit >>> link removed
mod edit >>> link removed
this is not created by me all credits go to Skytech........
This does not contain widgets you can use Beutifull widget app from Play store
https://play.google.com/store/apps/details?id=com.levelup.beautifulwidgets.free&hl=en
Don't Forget To Thanks If you Like

"UI stop working" when I use on My Galaxy Pocket Neo!

how do i uninstall it? thanks

Nice, but BW failed to create widgets on home screen. [emoji19]

How to uninstall plz auggest it

hamsam said:
Here is the touch whiz launcher for Android
for original thread move here[http://skytech101.blogspot.com/2013/05/install-galaxy-s4-touchwiz-launcher-on.html]
Instructions
1. Download the launcher with proper resolution for your device and transfer it your root of SD card (not in any folder for convinience)
2. Backup your current ROM from “backup and restore” option in recovery (for safety but you can skip this step)
3. Go to "Advanced" and "Wipe dalvik cache" (do it before and after installation)
4. Now select "Install zip from sdcard" and then select the downloaded file and flash it
5. Go to "Advanced" and "Wipe dalvik cache” once again.
6. Get back and Reboot
Now as you press you home key you will have a TouchWiz launcher option. Viola it means you have successfully installed Touchwiz launcher off Galaxy S4 on your Non-Touchwiz device. Enjoy...!!
mod edit >>> link removed
mod edit >>> link removed
mod edit >>> link removed
mod edit >>> link removed
this is not created by me all credits go to Skytech........
This does not contain widgets you can use Beutifull widget app from Play store
https://play.google.com/store/apps/details?id=com.levelup.beautifulwidgets.free&hl=en
Don't Forget To Thanks If you Like
Click to expand...
Click to collapse
The links that you provided does not work. When i wanted to download LDPI version, it goes to "dev host", but upon clicking on "download now", it said, "this site can't be reached". I've tried from different network with no luck. Please provide updated links.

Bro help send zip to [email protected] if you can't send zip atleast tell me how to download this file

Where are links?

Material Theme for TWRP recovery !

Hello,
As you have seen, latest versions of TWRP recovery has got the new material theme which is more fresh and better looking than the original TWRP theme . To get these themes:
1)- Visit this link https://s.basketbuild.com/devs/z31s1g/720/ thanks to @z31s1g
2)- choose the TWRP version you're using (e.g i used 2.8.7.0 for this guide) and download your preferred theme, there are 3 choices upto now.
3)- Once you've downloaded the theme rename the zip e.g "287X_v1_720_play.zip" to "ui.zip".
4)- Then go to TWRP folder in your internal storage (critical step) and create new folder and name it "theme".
5)- Copy the "ui.zip" you downloaded in the "theme" folder and reboot in recovery, the new theme will load automatically.
Tip: you can take screenshots in recovery (yay no more commandline) by pressing VOL DOWN + POWER
Please Press Thanks button if you find this useful :highfive:
PS: Note that this is compatible only with devices who have 720*1280 resolution, you can download different resolutions from the original thread
Original thread http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584