Develop Bugs

[ROM] I9000T I9000TDOJP2 Froyo Kies

Thanks restrepogoez
I want to inform that there is no need to change our I9000T I9000M the i9000 or as firmware was released today FroYo Model: GT-I9000T | Code: TNZ | Version: I9000TDOJP2/I9000TTNZJP2/I9000TDOJP1 that New Zealand is already tested and works perfect the 850Mhz band and it works perfectly, also has the Spanish language.
for download through KIES:
you must edit the registry or run the Registry Patcher Kies v.1.5.0.0
Model: I9000T
ProductCode:GT-I9000HKTTNZ (NEW ZELAND)
HIDSWVER: I9000TDOJJ1/I9000TTNZJI1/I9000TDOJI1/I9000TDOJJ1
actualiza a:
Model: I9000T
ProductCode:GT-I9000HKTTNZ (NEW ZELAND)
HIDSWVER:I9000TDOJP2/I9000TTNZJP2/I9000TDOJP1/I9000TDOJP2
Link for Odin
http://www.megaupload.com/?d=UZ6VBGBJ
PASS:restrepogoez
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Battery Mod
Version C for I9000TDOJP2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.mediafire.com/file/3uewvdmlb88e6c9/framework-res.apk

Galaxy S --- NEED HELP---
Hi there,
I need HELP, I was trying to lag fix my galaxy S and I have screwed it big time, it get stuck on Galaxy S screen.
I am in NZ with Telecom XT so have to download correct ROM and other respective files in order to work with my Galaxy.
I was wondering if u can help me find the correct files so I can factory reset my one.
Will look forward to your reply.
Regards,
Ali

Wow, dude. You think this might work with a I9000T from Mexico?

It should its the same model

ali_galaxy said:
Hi there,
I need HELP, I was trying to lag fix my galaxy S and I have screwed it big time, it get stuck on Galaxy S screen.
I am in NZ with Telecom XT so have to download correct ROM and other respective files in order to work with my Galaxy.
I was wondering if u can help me find the correct files so I can factory reset my one.
Will look forward to your reply.
Regards,
Ali
Click to expand...
Click to collapse
Try Sam Firmware site.
Doesn't look like they've got the exact firmware but you might be happy with something else under the "Asia" group of firmware.
You will need Odin to flash this. Instructions are on the website. And you will need to create a login (simple, nothing much requested to create a profile).

Could someone provide modem file for this firmware???

Ok will definitely try it. Too bad it's not JPO, tho. So after flashing this, is it ok to put in an optimized kernel and stuff?

I got the phone up and running altlast yay... but via recovery mode.. still very eager to upgrade... but with this NZ version if possible

Have you got any way of posting the rom? I have tried upgrading via the keis registry hack and it tells me that the original jj1 is not ready for upgrade.
Any help would be appreciated. I am on the Telecom network.
Cheers.

Be great if the modem from the TNZ could be extracted!

For ROM downloading, try this guy here:
http://www.modaco.com/content/i8000...41/samsung-mobile-firmware-queries-downloads/
I think he's ok. I once sent him 6 euros for a query and a download request and he returned them right back, because my specific ROM wasn't available.

Thanks for the link mate

I'm watching this one as well. After bricking my I9000T already trying to get to 2.2 I'm ikely to try this soon (when I get it back). Not game to do it on the wifes phone
Do we know if this is official TNZ branded firmware, or generic/unbranded?

@all, will this get the official froyo on my 850 next g telstra(australia) I9000T? and can you plzz tellme how to upgrade with kies hack? sorry im a noob, plzz help me out..id be greatful. cheers

Open up 'regedit' and go to the 'HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB' key. Then delete all the keys below it (i.e. 1, 2, 3, 4, 5, 6...).
Then open Kies and connect your phone so that it is detected by Kies.
Close Kies and run the EXE that you download for the Registry Patcher (http://forum.xda-developers.com/showthread.php?t=835628).
You should get a prompt to set the patch to 'True', select your sales code (not sure what Telstra is sorry), the current versions you want to report etc.
I haven't gone any further than that personally as I don't have 'my' phone back and the risk of problems from doing the wife's is just too frighting LOL.

sub7er said:
@all, will this get the official froyo on my 850 next g telstra(australia) I9000T? and can you plzz tellme how to upgrade with kies hack? sorry im a noob, plzz help me out..id be greatful. cheers
Click to expand...
Click to collapse
I'm with Telstra (GT-9000T) and I flashed this with Kies and the reg patcher. Works well, 850 band still there had to put the Telstra info back in for MMS and Internet.
This had a "telecom" splash on start up and two apps from the the same brand. Still much better then the 26 Telstra puts on.
Hope this helps.

KyBosch said:
I'm with Telstra (GT-9000T) and I flashed this with Kies and the reg patcher. Works well, 850 band still there had to put the Telstra info back in for MMS and Internet.
This had a "telecom" splash on start up and two apps from the the same brand. Still much better then the 26 Telstra puts on.
Hope this helps.
Click to expand...
Click to collapse
Guessing the two apps were 'Y!X TWorld' and 'Your Telecom'? That is pretty much the Telecom customised firmware then. While I hate customised firmware I'm pretty keen to get to 2.2 so perhaps the wife's phone will succumb afterall

Tordne1 said:
Guessing the two apps were 'Y!X TWorld' and 'Your Telecom'? That is pretty much the Telecom customised firmware then. While I hate customised firmware I'm pretty keen to get to 2.2 so perhaps the wife's phone will succumb afterall
Click to expand...
Click to collapse
Yup and the wallpapers are a bit different also navigon works with the 2.2

KyBosch said:
Yup and the wallpapers are a bit different also navigon works with the 2.2
Click to expand...
Click to collapse
And Flash Player .
I was really surprised when I got the phone home a few weeks ago that I couldn't immediately update to 2.2, seeing is it has been out for months and all. I guess that's one of the annoying things about each hardware manufacturing trying to put their personal touch on things. Might look at the Nexus S for this reason a bit later...

Tordne1 said:
Open up 'regedit' and go to the 'HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB' key. Then delete all the keys below it (i.e. 1, 2, 3, 4, 5, 6...).
Then open Kies and connect your phone so that it is detected by Kies.
Close Kies and run the EXE that you download for the Registry Patcher (http://forum.xda-developers.com/showthread.php?t=835628).
You should get a prompt to set the patch to 'True', select your sales code (not sure what Telstra is sorry), the current versions you want to report etc.
I haven't gone any further than that personally as I don't have 'my' phone back and the risk of problems from doing the wife's is just too frighting LOL.
Click to expand...
Click to collapse
Thanks for the instructions they were helpful and anybody in NEW ZEALAND on Galaxy can do this update its easy as and its for Telecom NZ...
Also here is a nice walk-through translated by google... its in spanish
http://translate.google.co.nz/trans...=/search?q=%5BROM%5D+I9000T+I9000TDOJP2&hl=en

[SPRINT][VZW][CDMA] P100 Heimdall One-Click Back To Stock

Introduction
This package will totally reset your Galaxy Tab P100 to EA24 . This package is intended for use on the SPRINT Galaxy Tab.
This package includes:
Repartitioning: Repartition to stock EA24
Reloading: IBL/PBL, PARAM, SBL, SBL2, Kernel, Recovery, FactoryFS and
Formatting:Cache and DBdata
This package does not wipe:
MODEM(communications handler, get one from The Modem Thread)
EFS(Where your serial number and carrier information is stored)
Data(where your market apps are stored)
SDCard (where your pictures are stored)
Download:
Download Sprint Total Stock EA24
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download VZW Total Stock DJ11
Instructions:
Get the latest version of java here: http://java.com/en/download/installed.jsp
Put your phone into "Download Mode"
Run the program once, and if it does not work, then check the "Flash Bootloaders" checkbox and flash again
Your device will end up as it came from the factory. You will be asked to set your device up again. After connecting to WIFI you may receive a carrier package update.

Will this work for VZW Tabs? I see VZW in the title, but EA24 is totally Sprint. What gives?

ezeuba said:
Will this work for VZW Tabs? I see VZW in the title, but EA24 is totally Sprint. What gives?
Click to expand...
Click to collapse
It is a sprint package. My focus is recovery with UnBrickable mod. This is part of a system of recovery for use with Linux where a device which wont boot needs a firmware flash from temporarily uploaded bootloaders.
I'll get a vzw package up. I totally forgot about carrier branding.

Yeah this will be great for VZW. I was thinking of selling mine and returning it to stock but when I tried it said baseband was EI04 but it was android version 2.2??!??? will your method, when u post it, take us back to stock 2.3.5 EI04?

tombepa said:
Yeah this will be great for VZW. I was thinking of selling mine and returning it to stock but when I tried it said baseband was EI04 but it was android version 2.2??!??? will your method, when u post it, take us back to stock 2.3.5 EI04?
Click to expand...
Click to collapse
I'm uploading DJ11 right now, this is a 2.2 build.

tried this tonight on VZW tab - flash goes fine - when I try activation bypass with volume up/down, it works initially, then lets me proceed with setup, but when setup is done and get prompt that galaxy tab is ready to use, it takes me back to the "welcome to SCH-I800" screen (which I've never seen on any ROM - can't remember if it was there when I first got the tab stock and set it up) - when I touch the android, it takes me back to activation screen, but activation bypass will not work this time - perhaps some remnants of your Sprint files still there? Have reflashed three times, same result - I don't know - so close to working - I'm trying to get back to stock DJ11 so I can update to stock 2.3.5 - anyone else having this problem?

Jacklad said:
tried this tonight on VZW tab - flash goes fine - when I try activation bypass with volume up/down, it works initially, then lets me proceed with setup, but when setup is done and get prompt that galaxy tab is ready to use, it takes me back to the "welcome to SCH-I800" screen (which I've never seen on any ROM - can't remember if it was there when I first got the tab stock and set it up) - when I touch the android, it takes me back to activation screen, but activation bypass will not work this time - perhaps some remnants of your Sprint files still there? Have reflashed three times, same result - I don't know - so close to working - I'm trying to get back to stock DJ11 so I can update to stock 2.3.5 - anyone else having this problem?
Click to expand...
Click to collapse
They're two different packages. Different kernels ROMs and Params and cache. You're experiencing a stock ROM which requires activation.

AdamOutler said:
They're two different packages. Different kernels ROMs and Params and cache. You're experiencing a stock ROM which requires activation.
Click to expand...
Click to collapse
Understood that it's stock - but even on out of the box, totally stock tabs the bypass trick works - something weird about they way it will take you through the setup process perfectly, only to bring you back to the android screen, which you do not see initially - I don't use a data plan, just wi-fi - you've done such a great job here, so close - is there any workaround?

If only this could restore modem... I would've named it the holy grail of Galaxy Tab.

I've released information on creating your own Heimdall one-Click here: [Release] Heimdall One-Click - ROM Packaging and Distribution System

I know this is an old thread but I need some assistance from whoever can provide it. I am trying to return my Sprint tab to stock with the one click but I am having a hard time.
I try to do it, but I am constantly running into walls.
I try to flash but it gets stuck on the last step where it says that it has to reboot the tab. then the one click screen says disconnected. And the computer says that it found new hardware. The tab stays looping at the samsung screen.
What should I do to get out of this?

I feel your pain! I wound up bootlooping my Sprint Tab yesterday.
I didn't see this thread, so I don't have any experience with this particular tool. However, I did manage to recover my Sprint through information I found on the forums.
You should still be able to put it back into download mode. Then using Odin/Heimdall, you can flash it back to stock with the stuff found in this post: Stock Odin/Heimdall Files: Stock EF17 Tar
Also, the [SPRINT][CDMA]Galaxy Tab (SPH-P100) Mega Development Starter Thread (CWM, EF17 TAR) thread was pretty helpful too.
Hope this gets you headed in the right direction, I haven't done much flashing with my tablet and the information above wound up helping me out.

Please Reupload Stock Firmware
Hey wondering if anybody still has the one click file for sprint sph p100
I can't find any good download links for sph p100 seems like they are too old.
Thanks

Root for Samsung Galaxy Discover

Is there a root available for this phone?
Model: SGH-S730M
OS: Android 4.0.4
Baseband: A730MVLALJ5
Kernel: 3.0.8-1141737 [email protected] #1 Thu Oct 11 19:22:01 KST 2012
Build: IMM76D.S730MVLALJ5

Wonder whether one can use Odin to flash the Siyah v. 5 kernal, which works for SGS2, to root the Galaxy Discover SGH-S730?

fjcotter said:
Wonder whether one can use Odin to flash the Siyah v. 5 kernal, which works for SGS2, to root the Galaxy Discover SGH-S730?
Click to expand...
Click to collapse
well I tried that and mine failed on nand write start

sebzag said:
Is there a root available for this phone?
Model: SGH-S730M
OS: Android 4.0.4
Baseband: A730MVLALJ5
Kernel: 3.0.8-1141737 [email protected] #1 Thu Oct 11 19:22:01 KST 2012
Build: IMM76D.S730MVLALJ5
Click to expand...
Click to collapse
Ive also been looking to root my galaxy sgh s730m since the day i got it , but havent had much success at all
i did happen to find an unlock for 21.99$ it works great , but would love to have this phone rooted !!! ive tried the process of the ICS Root (Binary) but it failed and did not work , so i guess were stuck for a bit

I've actually used Kijiji today and found someone who said they can root the phone. The they are charging $25.00 I will get it done over the weekend and post back to let you know how all is. I'm gonna try to ask him what program or softwares he used to root this phone
Sent from my SGH-S730M using xda app-developers app

The kernal in my Samsung Galaxy Discover has the last 3 characters listed as "LJ5". A kernal similar to LJ5 which works in a Samsung phone under the ICS enviromnment ma y work.
Has anyone tried the Root_with_Restore_by_Bin4ry_v18 method yet? This file which works in Samsung Galaxy S2 and other phones rquires no flashing of kernal.
There are several sites which claim to unlock the Samsung Galaxy Discover with prices ranging from $7.29 to $14.99 to $20. But it would be more challenging to root the phone and have superuser privilege to do changes.

I tried that one as well and got a mounting error

Did the mounting error occur before or after you run "runme.bat" ?

after

bump

EventualDrip said:
bump
Click to expand...
Click to collapse
Well i wanted to bring my phone in to get rooted on saturday , but friday night the phone had turned off and wouldnt turn back on again , i have no idea what happened so i returned it to the store and got a different phone , i am done with android for the time being because it seems everytime i get an android it bricks itself or there is some sort of problem with it ,
i will be buying a samsung galaxy s2 though in the next few weeks , im sure that will be easy to root !
so as for me getting the phone rooted , that isnt going to happen unless i do come up with a way to get the discover again , but probally wont be buying it ...
Sorry for the inconvienice

Here is a mobile odin log I got.
But now the phone is unusable, wrong kernel or ramdisk I don't know (touchscreen problem)

Has anyone made progress with this? This phone is hurtin' and needs root...if not then a hammer...

What version of android does this device run? If you are running ICS you can give http://forum.xda-developers.com/showthread.php?t=2066041 a shot. Please also let me know, so I can add the device to the supported list, if it works.

well I ran two different versions Polaroid all in one 1.6 and 2.0 and they both seem to work fine with loading up and recognizing the phone however 2.0 said the phone was already rooted when it wasn't, there wasn't much I could do as seen in the screen shot below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I then tried 1.6 and that loaded up as well and asked if I wanted to root or root with google apps and framework so I choose just root it and it asked me to restore and rebooted just fine and said I wasn't rooted, so I'm a little confused. another screen shot below
also I should note that I am a complete idiot when it comes to this stuff, so I may have done something wrong or missed something

TeODH4 said:
What version of android does this device run? If you are running ICS you can give http://forum.xda-developers.com/showthread.php?t=2066041 a shot. Please also let me know, so I can add the device to the supported list, if it works.
Click to expand...
Click to collapse
Thanks for the tip! I tried it out but I got stuck at the waiting for phone to connect part. I'm sure I could get further, but I've lost all patience for this handset.
Rather than pull my hair out trying to fix this broken out of the box value phone, I returned it to the store for something a little more user (and battery) friendly.

Great can you upload a dump somewhere please, I bricked mine trying many ways and there are no stock rom anywhere.
I need, boot, recovery, and system.
Thank you

meldo said:
Clan you help me by uploading a dump of boot, recovery and system partition please.
I can help you by PM
Click to expand...
Click to collapse
Can you PM me the instructions to get those. I will try to get them for you tomorrow.

punk_zappa said:
Can you PM me the instructions to get those. I will try to get them for you tomorrow.
Click to expand...
Click to collapse
It's great to hear that you have rooted successfully the SGH-S730M. For me, I have bricked mine. It is appreciated if your can share the boot, recovery and partition image of your phone to us so that we can repair the brick.
It is fairly easy to backup your ROM:
1. Download and install ROM Manager from Google Play (the free version works great).
2. Run the program and click on "Backup Current ROM" and click OK - remember to have your external Sdcard inserted to have more space for the backup. By default the file name of the backup which will be created is your current date.
3. Look for the folder "clockworkmod" in the sdcard, in there you will find the folder backup, then in that folder you see a sub-folder with all backup files.
For me, I need the file "recovery.img" so that I can restore my blicked recovery of my Galaxy Discover.
Looking forward to hear from you the soonest.
Pls mail me the file to [email protected] or give the link so that I can download
Thank you in advance.
lvdoan

Sorry, folks. Been working on it for almost 6 hours with both romdump and ROM Manager. ROM manager cannot backup because "phone is unsupported". With romdump I am having "segmentation fault".
If you guys have anymore ideas please throw them in.
BTW, that unlock-root worked and it is very simple.

[Q] [REQUEST] CWM for Cubix Cube CX100

Can you make us a CWM so we can have a custom rom
here`s the info of our phone
Thank you in advance
Hardware : MT6592
Model : CX100
Build number : Cubix Cube S06 05/15/2015
Build date UTC : 20150525-061619
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V35.P8, 2015/05/25 14:02
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Mon May 25 14:13:12 CST 2015
Uboot build v : -----
LCD Driver IC : 1-otm1284a_hd720

Up really need it

Sir,
Do you have the stock rom of this? My phone went bricked after updating its firmware OTA. Cannot use anymore the phone. It is already stuck in his recovery mode. I already tried factory/wipe reser but still after reboot i cant use it.
Im planning to reflash its original stock rom but still dont have such ROM. Thank you.

jamcute18m said:
Sir,
Do you have the stock rom of this? My phone went bricked after updating its firmware OTA. Cannot use anymore the phone. It is already stuck in his recovery mode. I already tried factory/wipe reser but still after reboot i cant use it.
Im planning to reflash its original stock rom but still dont have such ROM. Thank you.
Click to expand...
Click to collapse
i have the same problem bro
but my CX100 is now deadboot that`s why im looking for firmware or full back up of its rom that flashable in sp flash tool

Oh! I think the cherry mobile OTA has an error on sending the said update OTA. I am still looking for a stock rom online but seems i cannot find one. Hays! This caused me incovenience bcoz i dont have any backup fone that can be used for my two other networks.

i read in one of the responses where i posted this similar request that the reason why we are encountering this issue is that we rooted the phone and updated the same OTA. so most likely it corrupted the system and put our phone in a deadboot scenario.
did you find a workaround on this concern? i hope that the XDA team can help us with this.

Same problem here
Up for this.i just bought one from lazada and i got stuck on splash screen.they say it was bootlooped,i just wreck my one day old phone just because of the update.may i add some suggestion?.can you make the cwm recovery flashable thru stock recovery?.

Up for this.I hope one of the devs can see this.
Sent from my Xperia Z2 using XDA Free mobile app

guys what's d name of ur phone memory? is it sdcard0 or sdcard1? my problem is that, whenever i place obb file of d game in my phone memory (sdcard1), my cubix searches for available resources online the fact that ive already place it at phone memory. in my experience, ive never encountered a phone memory labeled as sdcard1. anyone can enlighten me?

Anyone knows how to fix the changing wifi mac address of this device?

Me too. I really need it. I can't use my cubix anymore after OTA update last week ago. Pls. somebody who is kindhearted enough to help. TIA

Cubix cube issues
TriaL11 said:
Anyone knows how to fix the changing wifi mac address of this device?
Click to expand...
Click to collapse
New guy here... I'm also experiencing the same issue as yours, I always thought MAC addresses are a static type of address. I'm also experiencing fast battery drain issues in this device, it's like for every 1 minute battery goes down by a percent! I'm using Battery Log app.
I'm also quite wondering why there is no back light on the capacitive buttons ?

Rypear said:
New guy here... I'm also experiencing the same issue as yours, I always thought MAC addresses are a static type of address. I'm also experiencing fast battery drain issues in this device, it's like for every 1 minute battery goes down by a percent! I'm using Battery Log app.
I'm also quite wondering why there is no back light on the capacitive buttons
Click to expand...
Click to collapse
Try to uninstall system apps and use 3c toolbox pro to tweak ur device.
---------- Post added at 01:16 PM ---------- Previous post was at 01:09 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is 3c Toolbox can fix the mac address issue of this device? if yes will you be so kind to teach us how?
Thanks..

jamcute18m said:
Sir,
Do you have the stock rom of this? My phone went bricked after updating its firmware OTA. Cannot use anymore the phone. It is already stuck in his recovery mode. I already tried factory/wipe reser but still after reboot i cant use it.
Im planning to reflash its original stock rom but still dont have such ROM. Thank you.
Click to expand...
Click to collapse
Same here. I installed the wirelass update and it's stuck sa bootloop/recovery. Most likely since I applied updates when I didn't realize that my phone was on low battery.. Now it's just showing the battery icon when plugged in but does not seem to be charging at all. Animation was not moving,.. My phone was rooted however I was not able to install a custom recovery (clockworkmod) on it while it was still working. I also needed a copy of the stock rom..Already done factory reset and cleared cache.. stll nothing works..

gld0321 said:
Same here. I installed the wirelass update and it's stuck sa bootloop/recovery. Most likely since I applied updates when I didn't realize that my phone was on low battery.. Now it's just showing the battery icon when plugged in but does not seem to be charging at all. Animation was not moving,.. My phone was rooted however I was not able to install a custom recovery (clockworkmod) on it while it was still working. I also needed a copy of the stock rom..Already done factory reset and cleared cache.. stll nothing works..
Click to expand...
Click to collapse
The trick is.. DO NOT UPDATE YOUR PHONE WHEN IT'S ROOTED.. OR ELSE IT WILL BRICK IT!!

Waiting for a miracle., haha

this is your miracle for stock rom cubix
meron na yan

anung meron na? saan? hehe

Sent from my SM-A500G using XDA Free mobile app My mobile model name is GT-I9100G
And s/N number is
S/N: RF1CC2BAQVA
I need the original PDA for my phone so that I can repair it with odin.my phone shows "firmware upgrade encountered an essu......." so that I can't see my pda version from my device.just tell me someone that what is my PDA version I have downloaded some version but it's not working.please help me someone as soon as possible.

EasyConnected for Android Nougat?

So I can't get my EasyConnected app working with my Pixel XL. It just says "Failed to install MOB Interconnection Service" or something along those lines. I thought the new app posted might finally be the version needed to resolve this, but to no avail. Does ANYONE have a solution/alternative app so I can mirror my phone to the unit? I'm running the latest Malaysk ROM, but I doubt that's really relevant. Thanks

Grumpycat62 said:
So I can't get my EasyConnected app working with my Pixel XL. It just says "Failed to install MOB Interconnection Service" or something along those lines. I thought the new app posted might finally be the version needed to resolve this, but to no avail. Does ANYONE have a solution/alternative app so I can mirror my phone to the unit? I'm running the latest Malaysk ROM, but I doubt that's really relevant. Thanks
Click to expand...
Click to collapse
Try this ...
http://www.autopumpkin.com/forum/viewtopic.php?f=20&t=1584

Grumpycat62 said:
So I can't get my EasyConnected app working with my Pixel XL. It just says "Failed to install MOB Interconnection Service" or something along those lines. I thought the new app posted might finally be the version needed to resolve this, but to no avail. Does ANYONE have a solution/alternative app so I can mirror my phone to the unit? I'm running the latest Malaysk ROM, but I doubt that's really relevant. Thanks
Click to expand...
Click to collapse
I just put this on my stereo as I was getting this same message.
Now I'm getting another message:
No access to the serial number of device Hardware please contact the dealer.
Can't past this page.

have you set your phone to USB debugging ? need to turn this on to get MOB working ..

Joying head unit running easy connected "No access to serial number"???
I'm having the same issue. I have a joying head unit with easy connected version HT03.4.3.6 installed. I'm trying to connect my Samsung galaxy s7 edge but it keeps coming up "No access to the serial number of device hardware, please contact dealer" if anybody could help me get this up and running again It would be much appreciated???

-open settings on Head Unit under apps menu find the easy connect and uninstall update
-then open app again
- bottom right corner of the
screen you'll see version number
Touch it and select update woala. It works.
SM-G935F cihazımdan Tapatalk kullanılarak gönderildi

Working now!
ihsansevilir said:
-open settings on Head Unit under apps menu find the easy connect and uninstall update
-then open app again
- bottom right corner of the
screen you'll see version number
Touch it and select update woala. It works.
SM-G935F cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Thanks, ihsansevilir - I followed your instructions above (after fitting an original Samsung cable to the head unit) & finally my Easy Connect in working!!! This has been driving me mad for weeks - Thank you!!!

Could you be more specific, please!
For what I can understand, you culdn't connect your phone with your car using EasyConnected and got the Failed to Insatall the Interconnection Service error. So, you upgraded to the latest version. With this verrsion you run into the serial number problem.
So, is it with this latest version from autopumpkin that you apply this method:
-open settings on Head Unit under apps menu find the easy connect and uninstall update
-then open app again
- bottom right corner of the
screen you'll see version number
Touch it and select update woala. It works.
Click to expand...
Click to collapse
For me it is very important to know this, because once I install the latest version, I wont be able to go back to the old one and use older phones (which were working OK). Only taking the car to the dealer will do. Also, I'm not sure that the uninstall the upgrade option will be available in settings for Android 4.4.x
I am trying to connect a Samsung Galaxy S7
Thanks for your help!

EasyConnected Serial issue - Please help!
I am having this problem, i have a number of Android phones, including an Android 7 Nougat that i want to use EasyConnected with. I have tried the latest .apk HT03.4.3.6 and tried many other .apk previous to that.
i'm using a genuine cable.
It gets to the following "NO access to the serial number of the device hardware, please contact the dealer"
and fails because of the serial number issue. also the S/N says "null" so i'm assuming it is looking for a serial number??
i read somewhere about creating a .net_easyconn_license file? Would this help? What is the file and where does this .net_easyconn_license reside in which directory?
Any assistance would be helpful, Thanks, i hope someone can assist as i'm fairly new to this.
beach_dweller

I am having the same problem as the original post. I am running a pixel xl with android 8.1. The head unit is a eonon ga8180. Hu is running Android 7.1.2. I have tried updating the easy connect app but it is on the latest version 5.4.3.9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Drive mode does come up on my phone but the hu doesn't recognize that it is running.
I am out of ideas. If anyone has any insight or recommendations for apps that have the same functionality. This is my first android head unit, and I've only had it installed for 24 hours.

I gave up and installed a different app, Airscreen AirPlay
Sent from my iPhone using Tapatalk

any update on this please it was working once and now cant get it to work again.

Update with this apk
This it 4.4.1 update for the app on the car stereo, it works on the android 7.1.2 headunit and others.
mega.nz/#!oI4ggS4T!eN7yLXt5fl6xixIeDsFDKXUenANLRGUdpReWfaOS0Bg
Just install on the headunit and it will update the app there's no need to uninstall the previous app

HELP
i have the same problem but when i connect my phone to my radio it says No access to the serial number of device Hardware please contact the dealer ,but the weird thing is taht my phone recognize the radio and it show me the synced app , plz help

HELP HELP
i can't get my nokia 8 with android 8.1 or asus zenfone zoom 3 with android 7.1 to connect to easy connect when i connect my USB to car stereo system with windows ce 5.0 it just stock on install MOB interconnection service and it keep installing easy connected server 4.2.7 and uninstalling immediately is there any help you guys can give me

Im running LY01.4.3.0 and my unit is android 4.4.4. It says MOB interconnection service installation failed. I tried autopumpkins method and touched the update button,but it says it is the latest version. Im using a samsung galaxy a5 (2017). any help would be appreciated

enirlan said:
Im running LY01.4.3.0 and my unit is android 4.4.4. It says MOB interconnection service installation failed. I tried autopumpkins method and touched the update button,but it says it is the latest version. Im using a samsung galaxy a5 (2017). any help would be appreciated
Click to expand...
Click to collapse
I ended up upgrading my HU to android 5.1, as i found another post with instructions to do so along with an image. I performed the upgrade in hopes of fixing the problem, but i ended up with the same result.
After this I installed EasyConnection service from play store. I also forgot to mention in my prior post that my phone is running android 8.0. Using this app solved my problem. The steps i took to get this to work :
1) Goto playstore and search for EasyConnection. Install it.
2) Open EasyConnection.
3) After the TOS / EULA, Click the profile / settings button in bottom left of screen.
4) Open "cellphone-automobile interconnection software". Leave this open.
5) Turn on your headunit, plug in the USB cable (follow app instructions as normal).
6) Voila !
note, after the initial connection is made, you can disconnect the usb cable, and use wifi mode with mobile hotspot on your phone to get the connection. The drive mode app that comes with the HU is not used, and is instead replaced with the one native to the phone's app that is installed.
Hope this helps anyone else having the interconnection error !!

Use my this forum for details
https://www.pakwheels.com/forums/t/...e-in-dash-navigation-system-any-wince/1145598

Who can help me by easycon?
My Zenec Z-N326 with the last update will not connect with any phone: i have try it with
1 S9+ Android 8
2 S8 Android 9
2 S9 Android 10
1 S10+ Android 10
1 Nokia 7 Plus Andrid 10
When I connect my phone withe the unit the easycon app open on my phone on the unit i open Smartlink than i get a picture
When i push 5x on the text Nicht registriert... you can see the next picture
I need the serialnumber from easycon app by the unit how can I get it

hello. I have a question of how can remove Easyconnect from the car android radio? Unfortunately, on the menu, the app is unable to install the app.